[source] ipq806x: Archer C2600: fix switch ports numbering

[LEDE Commits]

mkresin pushed a commit to source.git, branch lede-17.01:
https://git.lede-project.org/97ebdf93a330ef1d7ff1cf6989cfb92ac2f5a386

commit 97ebdf93a330ef1d7ff1cf6989cfb92ac2f5a386
Author: Baptiste Jonglez <git at bitsofnetworks.org>
AuthorDate: Wed Aug 23 23:44:52 2017 +0200

    ipq806x: Archer C2600: fix switch ports numbering
    
    The order of LAN ports shown in Luci is reversed compared to what is
    written on the case of the device.  Fix the order so that they match.
    
    Signed-off-by: Baptiste Jonglez <git at bitsofnetworks.org>
---
 target/linux/ipq806x/base-files/etc/board.d/02_network | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index d88d777..f13d1e3 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -14,7 +14,6 @@ board=$(ipq806x_board_name)
 
 case "$board" in
 ap148 |\
-c2600 |\
 d7800 |\
 r7500 |\
 r7500v2 |\
@@ -23,6 +22,10 @@ vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
 	;;
+c2600)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
+	;;
 db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \