[source] ar71xx: add support for GL.iNet GL-USB150

LEDE Commits lede-commits at lists.infradead.org
Sun Sep 10 14:23:04 PDT 2017 

pepe2k pushed a commit to source.git, branch master:
https://git.lede-project.org/90d8c0f0a2f4c902348a2f514ba33f2c9c34e005

commit 90d8c0f0a2f4c902348a2f514ba33f2c9c34e005
Author: Piotr Dymacz <pepe2k at gmail.com>
AuthorDate: Sat Aug 19 18:26:46 2017 +0200

    ar71xx: add support for GL.iNet GL-USB150
    
    GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331.
    
    Specification:
    
    - 400/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 16 MB of FLASH (SPI NOR)
    - Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4)
    - 1T1R 2.4 GHz
    - 2x LED, 1x button
    - UART header on PCB
    
    Flash instruction:
    
    Vendor firmware is based on OpenWrt CC. GUI or sysupgrade can be used
    to flash LEDE firmware.
    
    Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds |  1 +
 .../linux/ar71xx/base-files/etc/board.d/02_network |  1 +
 target/linux/ar71xx/base-files/etc/diag.sh         |  1 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |  3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |  1 +
 target/linux/ar71xx/config-4.4                     |  1 +
 .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |  9 +++
 target/linux/ar71xx/files/arch/mips/ath79/Makefile |  1 +
 .../ar71xx/files/arch/mips/ath79/mach-gl-usb150.c  | 87 ++++++++++++++++++++++
 .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |  1 +
 target/linux/ar71xx/image/generic.mk               | 13 ++++
 target/linux/ar71xx/mikrotik/config-default        |  1 +
 target/linux/ar71xx/nand/config-default            |  1 +
 13 files changed, 121 insertions(+)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 4132e91..f367885 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -53,6 +53,7 @@ ap121f)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
 	;;
 ap531b0|\
+gl-usb150|\
 sc1750|\
 sc450)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index ba54d89..5fa8c2f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
 	eap7660d|\
 	el-mini|\
 	fritz300e|\
+	gl-usb150|\
 	hiveap-121|\
 	loco-m-xw|\
 	mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 7753a71..6794d89 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -59,6 +59,7 @@ get_status_led() {
 	archer-c59-v1|\
 	archer-c60-v1|\
 	fritz300e|\
+	gl-usb150|\
 	mr12|\
 	mr16|\
 	nbg6616|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 7fd5fb4..2eab610 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -672,6 +672,9 @@ ar71xx_board_detect() {
 	*"GL-MIFI")
 		name="gl-mifi"
 		;;
+	*"GL-USB150")
+		name="gl-usb150"
+		;;
 	*"HiveAP-121")
 		name="hiveap-121"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 05b5634..fcf3294 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -250,6 +250,7 @@ platform_check_image() {
 	gl-ar300|\
 	gl-domino|\
 	gl-mifi|\
+	gl-usb150|\
 	hiwifi-hc6361|\
 	hornet-ub-x2|\
 	jwap230|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 70793af..c747af9 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -116,6 +116,7 @@ CONFIG_ATH79_MACH_GL_AR300M=y
 CONFIG_ATH79_MACH_GL_DOMINO=y
 CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GL_MIFI=y
+CONFIG_ATH79_MACH_GL_USB150=y
 CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
 CONFIG_ATH79_MACH_GS_OOLITE=y
 # CONFIG_ATH79_MACH_HIVEAP_121 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ff9c303..6b6188d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -768,6 +768,15 @@ config ATH79_MACH_GL_INET
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_USB150
+	bool "GL.iNet GL-USB150 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_EAP120
 	bool "TP-LINK EAP120 support"
 	select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 469b6a7..9e91c44 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR300M)		+= mach-gl-ar300m.o
 obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
 obj-$(CONFIG_ATH79_MACH_GL_INET)		+= mach-gl-inet.o
 obj-$(CONFIG_ATH79_MACH_GL_MIFI)		+= mach-gl-mifi.o
+obj-$(CONFIG_ATH79_MACH_GL_USB150)		+= mach-gl-usb150.o
 obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)		+= mach-gs-minibox-v1.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE)		+= mach-gs-oolite.o
 obj-$(CONFIG_ATH79_MACH_HIVEAP_121)		+= mach-hiveap-121.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c
new file mode 100644
index 0000000..6cc27e1
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c
@@ -0,0 +1,87 @@
+/*
+ * GL.iNet GL-USB150 board support
+ *
+ * Copyright (C) 2017 Piotr Dymacz <pepe2k at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_USB150_GPIO_LED_POWER	13
+#define GL_USB150_GPIO_LED_WLAN		0
+#define GL_USB150_GPIO_LAN_RESET	7
+#define GL_USB150_GPIO_BTN_RESET	11
+
+#define GL_USB150_KEYS_POLL_INTERVAL		20
+#define GL_USB150_KEYS_DEBOUNCE_INTERVAL	\
+					(3 * GL_USB150_KEYS_POLL_INTERVAL)
+
+#define GL_USB150_WMAC_CALDATA_OFFSET	0x1000
+
+static struct gpio_led gl_usb150_leds_gpio[] __initdata = {
+	{
+		.name		= "gl-usb150:green:power",
+		.gpio		= GL_USB150_GPIO_LED_POWER,
+		.active_low	= 0,
+	}, {
+		.name		= "gl-usb150:green:wlan",
+		.gpio		= GL_USB150_GPIO_LED_WLAN,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button gl_usb150_gpio_keys[] __initdata = {
+	{
+		.desc			= "reset",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= GL_USB150_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= GL_USB150_GPIO_BTN_RESET,
+		.active_low		= 0,
+	},
+};
+
+static void __init gl_usb150_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	/* LAN (PHY4 connected with Realtek RTL8152B) */
+	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+	ath79_register_mdio(0, 0x0);
+	ath79_register_eth(0);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_usb150_leds_gpio),
+				 gl_usb150_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, GL_USB150_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(gl_usb150_gpio_keys),
+					gl_usb150_gpio_keys);
+
+	gpio_request_one(GL_USB150_GPIO_LAN_RESET,
+			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+			 "LAN reset");
+
+	ath79_register_wmac(art + GL_USB150_WMAC_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_USB150, "GL-USB150", "GL.iNet GL-USB150",
+	     gl_usb150_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 5bc50a4..16fbdce 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -112,6 +112,7 @@ enum ath79_mach_type {
 	ATH79_MACH_GL_DOMINO,			/* Domino */
 	ATH79_MACH_GL_INET,			/* GL-CONNECT GL-INET */
 	ATH79_MACH_GL_MIFI,			/* GL-MIFI support */
+	ATH79_MACH_GL_USB150,			/* GL.iNet GL-USB150 */
 	ATH79_MACH_GS_MINIBOX_V1,		/* Gainstrong MiniBox V1.0 */
 	ATH79_MACH_GS_OOLITE,			/* GS OOLITE V1.0 */
 	ATH79_MACH_HIVEAP_121,			/* Aerohive HiveAP-121*/
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 01c5bdc..f0b2179 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -278,6 +278,19 @@ define Device/gl-mifi
 endef
 TARGET_DEVICES += gl-mifi
 
+define Device/gl-usb150
+  DEVICE_TITLE := GL.iNet GL-USB150
+  DEVICE_PACKAGES := -swconfig
+  BOARDNAME := GL-USB150
+  IMAGE_SIZE := 16000k
+  CONSOLE := ttyATH0,115200
+  MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+  SUPPORTED_DEVICES := gl-usb150
+  IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-usb150
+
 define Device/lima
   DEVICE_TITLE := 8devices Lima
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 34c2fc1..83e3a03 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -80,6 +80,7 @@
 # CONFIG_ATH79_MACH_GL_DOMINO is not set
 # CONFIG_ATH79_MACH_GL_INET is not set
 # CONFIG_ATH79_MACH_GL_MIFI is not set
+# CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE is not set
 # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 57318b3..99eb346 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -81,6 +81,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
 # CONFIG_ATH79_MACH_GL_DOMINO is not set
 # CONFIG_ATH79_MACH_GL_INET is not set
 # CONFIG_ATH79_MACH_GL_MIFI is not set
+# CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE is not set
 CONFIG_ATH79_MACH_HIVEAP_121=y

More information about the lede-commits mailing list