[source] ipq806x: nbg6817: add kmod-fs-ext4 to device packages

[LEDE Commits]

mkresin pushed a commit to source.git, branch lede-17.01:
https://git.lede-project.org/2aff2add3116906b666da69bfff42a7aeeaee080

commit 2aff2add3116906b666da69bfff42a7aeeaee080
Author: Stefan Lippers-Hollmann <s.l-h at gmx.de>
AuthorDate: Thu Oct 19 21:40:26 2017 +0200

    ipq806x: nbg6817: add kmod-fs-ext4 to device packages
    
    The ZyXEL NBG6817 uses an eMMC flash for the rootfs, which is split
    into the readonly squashfs and ext4 for the overlay. This adds the
    required package to the device packages to allow mounting the overlay
    by default.
    
    /dev/root on /rom type squashfs (ro,relatime)
    proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
    sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
    tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
    /dev/loop0 on /overlay type ext4 (rw,noatime,data=ordered)
    overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
    tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
    devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
    debugfs on /sys/kernel/debug type debugfs (rw,noatime)
    mountd(pid1040) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)
    
    Before this commit, the ext4 based overlayfs could not be mounted,
    which left only the tmpfs based/ volatile  emergency overlay in place.
    
    Fixes: https://forum.lede-project.org/t/zyxel-nbg6817-flashing-from-oem/768
    
    Signed-off-by: Stefan Lippers-Hollmann <s.l-h at gmx.de>
---
 target/linux/ipq806x/image/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index e834b25..01bdb65 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -220,7 +220,7 @@ define Device/NBG6817
 	BLOCKSIZE := 64k
 	BOARD_NAME := nbg6817
 	DEVICE_TITLE := ZyXEL NBG6817
-	DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs losetup
+	DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
 	$(call Device/ZyXELImage)
 endef