[source] base-files: always use staged sysupgrade
LEDE Commits
lede-commits at lists.infradead.org
Mon May 29 14:57:03 PDT 2017
neoraider pushed a commit to source.git, branch master:
https://git.lede-project.org/30f61a34b4cfd2c676fea4a919e089d6a77254e9
commit 30f61a34b4cfd2c676fea4a919e089d6a77254e9
Author: Matthias Schiffer <mschiffer at universe-factory.net>
AuthorDate: Sat Apr 22 00:54:50 2017 +0200
base-files: always use staged sysupgrade
Support for the -d and -p options is dropped; it may be added again at some
point by adding these flags to the ubus sysupgrade call.
A downside of this is that we get a lot less information about the progress
of the upgrade: as soon as the actual upgrade starts, all shell sessions
are killed to allow unmounting the root filesystem.
Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
package/base-files/files/lib/upgrade/common.sh | 123 +++++++++++--------------
package/base-files/files/lib/upgrade/nand.sh | 60 ++----------
package/base-files/files/lib/upgrade/stage2 | 50 ++++++++++
package/base-files/files/sbin/sysupgrade | 77 +++++++++-------
4 files changed, 162 insertions(+), 148 deletions(-)
diff --git a/package/base-files/files/lib/upgrade/common.sh b/package/base-files/files/lib/upgrade/common.sh
index e3519ca..17248c2 100644
--- a/package/base-files/files/lib/upgrade/common.sh
+++ b/package/base-files/files/lib/upgrade/common.sh
@@ -56,7 +56,6 @@ run_ramfs() { # <command> [...]
/bin/rm /usr/bin/basename /bin/kill /bin/chmod /usr/bin/find \
/bin/mknod
- install_bin /bin/uclient-fetch /bin/wget
install_bin /sbin/mtd
install_bin /sbin/mount_root
install_bin /sbin/snapshot
@@ -96,51 +95,37 @@ run_ramfs() { # <command> [...]
exec /bin/busybox ash -c "$*"
}
-kill_remaining() { # [ <signal> ]
+kill_remaining() { # [ <signal> [ <loop> ] ]
local sig="${1:-TERM}"
+ local loop="${2:-0}"
+ local run=true
+ local stat
+
echo -n "Sending $sig to remaining processes ... "
- local my_pid=$$
- local my_ppid=$(cut -d' ' -f4 /proc/$my_pid/stat)
- local my_ppisupgraded=
- grep -q upgraded /proc/$my_ppid/cmdline >/dev/null && {
- local my_ppisupgraded=1
- }
-
- local stat
- for stat in /proc/[0-9]*/stat; do
- [ -f "$stat" ] || continue
-
- local pid name state ppid rest
- read pid name state ppid rest < $stat
- name="${name#(}"; name="${name%)}"
-
- local cmdline
- read cmdline < /proc/$pid/cmdline
-
- # Skip kernel threads
- [ -n "$cmdline" ] || continue
-
- if [ $$ -eq 1 ] || [ $my_ppid -eq 1 ] && [ -n "$my_ppisupgraded" ]; then
- # Running as init process, kill everything except me
- if [ $pid -ne $$ ] && [ $pid -ne $my_ppid ]; then
- echo -n "$name "
- kill -$sig $pid 2>/dev/null
- fi
- else
- case "$name" in
- # Skip essential services
- *procd*|*ash*|*init*|*watchdog*|*ssh*|*dropbear*|*telnet*|*login*|*hostapd*|*wpa_supplicant*|*nas*|*relayd*) : ;;
-
- # Killable process
- *)
- if [ $pid -ne $$ ] && [ $ppid -ne $$ ]; then
- echo -n "$name "
- kill -$sig $pid 2>/dev/null
- fi
- ;;
- esac
- fi
+ while $run; do
+ run=false
+ for stat in /proc/[0-9]*/stat; do
+ [ -f "$stat" ] || continue
+
+ local pid name state ppid rest
+ read pid name state ppid rest < $stat
+ name="${name#(}"; name="${name%)}"
+
+ # Skip PID1, ourself and our children
+ [ $pid -ne 1 -a $pid -ne $$ -a $ppid -ne $$ ] || continue
+
+ local cmdline
+ read cmdline < /proc/$pid/cmdline
+
+ # Skip kernel threads
+ [ -n "$cmdline" ] || continue
+
+ echo -n "$name "
+ kill -$sig $pid 2>/dev/null
+
+ [ $loop -eq 1 ] && run=true
+ done
done
echo ""
}
@@ -175,28 +160,31 @@ v() {
[ "$VERBOSE" -ge 1 ] && echo "$@"
}
+json_string() {
+ local v="$1"
+ v="${v//\\/\\\\}"
+ v="${v//\"/\\\"}"
+ echo "\"$v\""
+}
+
rootfs_type() {
/bin/mount | awk '($3 ~ /^\/$/) && ($5 !~ /rootfs/) { print $5 }'
}
get_image() { # <source> [ <command> ]
local from="$1"
- local conc="$2"
- local cmd
-
- case "$from" in
- http://*|ftp://*) cmd="wget -O- -q";;
- *) cmd="cat";;
- esac
- if [ -z "$conc" ]; then
- local magic="$(eval $cmd \"$from\" 2>/dev/null | dd bs=2 count=1 2>/dev/null | hexdump -n 2 -e '1/1 "%02x"')"
+ local cat="$2"
+
+ if [ -z "$cat" ]; then
+ local magic="$(dd if="$from" bs=2 count=1 2>/dev/null | hexdump -n 2 -e '1/1 "%02x"')"
case "$magic" in
- 1f8b) conc="zcat";;
- 425a) conc="bzcat";;
+ 1f8b) cat="zcat";;
+ 425a) cat="bzcat";;
+ *) cat="cat";;
esac
fi
- eval "$cmd \"$from\" 2>/dev/null ${conc:+| $conc}"
+ $cat "$from" 2>/dev/null
}
get_magic_word() {
@@ -320,12 +308,14 @@ default_do_upgrade() {
fi
}
-do_upgrade() {
+do_upgrade_stage2() {
v "Performing system upgrade..."
- if type 'platform_do_upgrade' >/dev/null 2>/dev/null; then
- platform_do_upgrade "$ARGV"
+ if [ -n "$do_upgrade" ]; then
+ $do_upgrade "$IMAGE"
+ elif type 'platform_do_upgrade' >/dev/null 2>/dev/null; then
+ platform_do_upgrade "$IMAGE"
else
- default_do_upgrade "$ARGV"
+ default_do_upgrade "$IMAGE"
fi
if [ "$SAVE_CONFIG" -eq 1 ] && type 'platform_copy_config' >/dev/null 2>/dev/null; then
@@ -333,12 +323,11 @@ do_upgrade() {
fi
v "Upgrade completed"
- [ -n "$DELAY" ] && sleep "$DELAY"
- ask_bool 1 "Reboot" && {
- v "Rebooting system..."
- umount -a
- reboot -f
- sleep 5
- echo b 2>/dev/null >/proc/sysrq-trigger
- }
+ sleep 1
+
+ v "Rebooting system..."
+ umount -a
+ reboot -f
+ sleep 5
+ echo b 2>/dev/null >/proc/sysrq-trigger
}
diff --git a/package/base-files/files/lib/upgrade/nand.sh b/package/base-files/files/lib/upgrade/nand.sh
index 9c831df..894964e 100644
--- a/package/base-files/files/lib/upgrade/nand.sh
+++ b/package/base-files/files/lib/upgrade/nand.sh
@@ -283,7 +283,16 @@ nand_upgrade_tar() {
}
# Recognize type of passed file and start the upgrade process
-nand_do_upgrade_stage2() {
+nand_do_upgrade() {
+ if [ -n "$IS_PRE_UPGRADE" ]; then
+ # Previously, nand_do_upgrade was called from the platform_pre_upgrade
+ # hook; this piece of code handles scripts that haven't been
+ # updated. All scripts should gradually move to call nand_do_upgrade
+ # from platform_do_upgrade instead.
+ export do_upgrade=nand_do_upgrade
+ return
+ fi
+
local file_type=$(identify $1)
if type 'platform_nand_pre_upgrade' >/dev/null 2>/dev/null; then
@@ -299,45 +308,6 @@ nand_do_upgrade_stage2() {
esac
}
-nand_upgrade_stage2() {
- [ $1 = "nand" ] && {
- [ -f "$2" ] && {
- touch /tmp/sysupgrade
-
- killall -9 telnetd
- killall -9 dropbear
- killall -9 ash
-
- kill_remaining TERM
- sleep 3
- kill_remaining KILL
-
- sleep 1
-
- if [ -n "$(rootfs_type)" ]; then
- v "Switching to ramdisk..."
- run_ramfs ". /lib/functions.sh; include /lib/upgrade; nand_do_upgrade_stage2 $2"
- else
- nand_do_upgrade_stage2 $2
- fi
- return 0
- }
- echo "Nand upgrade failed"
- exit 1
- }
-}
-
-nand_upgrade_stage1() {
- [ -f /tmp/sysupgrade-nand-path ] && {
- path="$(cat /tmp/sysupgrade-nand-path)"
- [ "$SAVE_CONFIG" != 1 -a -f "$CONF_TAR" ] &&
- rm $CONF_TAR
-
- ubus call system nandupgrade "{\"prefix\": \"$RAM_ROOT\", \"path\": \"$path\" }"
- exit 0
- }
-}
-
# Check if passed file is a valid one for NAND sysupgrade. Currently it accepts
# 3 types of files:
# 1) UBI - should contain an ubinized image, header is checked for the proper
@@ -364,13 +334,3 @@ nand_do_platform_check() {
return 0
}
-
-# Start NAND upgrade process
-#
-# $(1): file to be used for upgrade
-nand_do_upgrade() {
- echo -n $1 > /tmp/sysupgrade-nand-path
- install_bin /sbin/upgraded
- ln -s "$RAM_ROOT"/sbin/upgraded /tmp/upgraded
- nand_upgrade_stage1
-}
diff --git a/package/base-files/files/lib/upgrade/stage2 b/package/base-files/files/lib/upgrade/stage2
new file mode 100755
index 0000000..4e2aa3a
--- /dev/null
+++ b/package/base-files/files/lib/upgrade/stage2
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+export IMAGE="$1"
+COMMAND="$2"
+
+export ARGV="$IMAGE"
+export ARGC=1
+
+export SAVE_CONFIG=1
+export SAVE_PARTITIONS=1
+
+export INTERACTIVE=0
+export VERBOSE=1
+export CONFFILES=/tmp/sysupgrade.conffiles
+export CONF_TAR=/tmp/sysupgrade.tgz
+
+
+[ -f "$CONF_TAR" ] || export SAVE_CONFIG=0
+[ -f /tmp/sysupgrade.always.overwrite.bootdisk.partmap ] && export SAVE_PARTITIONS=0
+
+include /lib/upgrade
+
+
+killall -9 telnetd
+killall -9 dropbear
+killall -9 ash
+
+kill_remaining TERM
+sleep 3
+kill_remaining KILL 1
+
+sleep 1
+
+
+if [ -n "$IMAGE" ] && type 'platform_pre_upgrade' >/dev/null 2>/dev/null; then
+ IS_PRE_UPGRADE=1 platform_pre_upgrade "$IMAGE"
+
+ # Needs to be unset again because of busybox weirdness ...
+ IS_PRE_UPGRADE=
+fi
+
+if [ -n "$(rootfs_type)" ]; then
+ echo "Switching to ramdisk..."
+ run_ramfs "$COMMAND"
+else
+ exec /bin/busybox ash -c "$COMMAND"
+fi
diff --git a/package/base-files/files/sbin/sysupgrade b/package/base-files/files/sbin/sysupgrade
index c095ca8..2d67371 100755
--- a/package/base-files/files/sbin/sysupgrade
+++ b/package/base-files/files/sbin/sysupgrade
@@ -1,4 +1,7 @@
#!/bin/sh
+
+[ "$1" = "nand" ] && exec /lib/upgrade/stage2 "$2" "$3"
+
. /lib/functions.sh
. /lib/functions/system.sh
@@ -11,7 +14,6 @@ export VERBOSE=1
export SAVE_CONFIG=1
export SAVE_OVERLAY=0
export SAVE_PARTITIONS=1
-export DELAY=
export CONF_IMAGE=
export CONF_BACKUP_LIST=0
export CONF_BACKUP=
@@ -25,7 +27,6 @@ export TEST=0
while [ -n "$1" ]; do
case "$1" in
-i) export INTERACTIVE=1;;
- -d) export DELAY="$2"; shift;;
-v) export VERBOSE="$(($VERBOSE + 1))";;
-q) export VERBOSE="$(($VERBOSE - 1))";;
-n) export SAVE_CONFIG=0;;
@@ -50,10 +51,9 @@ done
export CONFFILES=/tmp/sysupgrade.conffiles
export CONF_TAR=/tmp/sysupgrade.tgz
-export ARGV="$*"
-export ARGC="$#"
+IMAGE="$1"
-[ -z "$ARGV" -a -z "$NEED_IMAGE" -o $HELP -gt 0 ] && {
+[ -z "$IMAGE" -a -z "$NEED_IMAGE" -o $HELP -gt 0 ] && {
cat <<EOF
Usage: $0 [<upgrade-option>...] <image file or URL>
$0 [-q] [-i] <backup-command> <file>
@@ -90,7 +90,7 @@ EOF
exit 1
}
-[ -n "$ARGV" -a -n "$NEED_IMAGE" ] && {
+[ -n "$IMAGE" -a -n "$NEED_IMAGE" ] && {
cat <<-EOF
-b|--create-backup and -r|--restore-backup do not perform a firmware upgrade.
Do not specify both -b|-r and a firmware image.
@@ -136,14 +136,13 @@ sysupgrade_pre_upgrade="fwtool_pre_upgrade"
include /lib/upgrade
-[ "$1" = "nand" ] && nand_upgrade_stage2 $@
-
do_save_conffiles() {
local conf_tar="${1:-$CONF_TAR}"
[ -z "$(rootfs_type)" ] && {
echo "Cannot save config while running from ramdisk."
ask_bool 0 "Abort" && exit
+ rm -f "$conf_tar"
return 0
}
run_hooks "$CONFFILES" $sysupgrade_init_conffiles
@@ -184,8 +183,33 @@ type platform_check_image >/dev/null 2>/dev/null || {
exit 1
}
+case "$IMAGE" in
+ http://*)
+ wget -O/tmp/sysupgrade.img "$IMAGE"
+ IMAGE=/tmp/sysupgrade.img
+ ;;
+esac
+
+IMAGE="$(readlink -f "$IMAGE")"
+
+case "$IMAGE" in
+ '')
+ echo "Image file not found."
+ exit 1
+ ;;
+ /tmp/*) ;;
+ *)
+ v "Image not in /tmp, copying..."
+ cp -f "$IMAGE" /tmp/sysupgrade.img
+ IMAGE=/tmp/sysupgrade.img
+ ;;
+esac
+
+export ARGV="$IMAGE"
+export ARGC=1
+
for check in $sysupgrade_image_check; do
- ( eval "$check \"\$ARGV\"" ) || {
+ ( $check "$IMAGE" ) || {
if [ $FORCE -eq 1 ]; then
echo "Image check '$check' failed but --force given - will update anyway!"
break
@@ -211,6 +235,7 @@ elif ask_bool $SAVE_CONFIG "Keep config files over reflash"; then
[ $TEST -eq 1 ] || do_save_conffiles
export SAVE_CONFIG=1
else
+ [ $TEST -eq 1 ] || rm -f "$CONF_TAR"
export SAVE_CONFIG=0
fi
@@ -218,28 +243,18 @@ if [ $TEST -eq 1 ]; then
exit 0
fi
-run_hooks "" $sysupgrade_pre_upgrade
-
-# Some platforms/devices may want different sysupgrade process, e.g. without
-# killing processes yet or calling ubus system upgrade method.
-# This is needed e.g. on NAND devices where we just want to trigger stage1 at
-# this point.
-if type 'platform_pre_upgrade' >/dev/null 2>/dev/null; then
- platform_pre_upgrade "$ARGV"
+if [ $SAVE_PARTITIONS -eq 0 ]; then
+ touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap
+else
+ rm -f /tmp/sysupgrade.always.overwrite.bootdisk.partmap
fi
-ubus call system upgrade
-touch /tmp/sysupgrade
-
-if [ ! -f /tmp/failsafe ] ; then
- kill_remaining TERM
- sleep 3
- kill_remaining KILL
-fi
+run_hooks "" $sysupgrade_pre_upgrade
-if [ -n "$(rootfs_type)" ]; then
- v "Switching to ramdisk..."
- run_ramfs '. /lib/functions.sh; include /lib/upgrade; do_upgrade'
-else
- do_upgrade
-fi
+install_bin /sbin/upgraded
+v "Commencing upgrade. All shell sessions will be closed now."
+ubus call system sysupgrade "{
+ \"prefix\": \"$RAM_ROOT\",
+ \"path\": $(json_string "$IMAGE"),
+ \"command\": \". /lib/functions.sh; include /lib/upgrade; do_upgrade_stage2\"
+}"
More information about the lede-commits
mailing list