[source] kernel: update kernel 4.4 to version 4.4.69
LEDE Commits
lede-commits at lists.infradead.org
Sun May 21 14:03:37 PDT 2017
hauke pushed a commit to source.git, branch master:
https://git.lede-project.org/088e28772c504ad622ba909b0f6d2986910e7a97
commit 088e28772c504ad622ba909b0f6d2986910e7a97
Author: Kevin Darbyshire-Bryant <kevin at darbyshire-bryant.me.uk>
AuthorDate: Mon May 15 15:03:47 2017 +0100
kernel: update kernel 4.4 to version 4.4.69
Refresh patches. A number of patches have landed upstream & hence are no
longer required locally:
062-[1-6]-MIPS-* series
042-0004-mtd-bcm47xxpart-fix-parsing-first-block
Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup
as it was incorrectly included upstream thus dropped from LEDE.
As it has now been reverted upstream it needs to be included again for
LEDE.
Run tested ar71xx Archer C7 v2 and lantiq.
Signed-off-by: Kevin Darbyshire-Bryant <kevin at darbyshire-bryant.me.uk>
[update from 4.4.68 to 4.4.69]
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
include/kernel-version.mk | 4 +-
.../525-MIPS-ath79-enable-qca-usb-quirks.patch | 8 +-
.../601-MIPS-ath79-add-more-register-defines.patch | 4 +-
.../patches-4.4/609-MIPS-ath79-ap136-fixes.patch | 14 +--
.../patches-4.4/910-unaligned_access_hacks.patch | 4 +-
.../ar71xx/patches-4.4/930-chipidea-pullup.patch | 10 +-
...m47xxpart-don-t-fail-because-of-bit-flips.patch | 4 +-
...part-fix-parsing-first-block-after-aligne.patch | 40 -------
.../062-01-MIPS-Introduce-irq_stack.patch | 70 -------------
...2-MIPS-Stack-unwinding-while-on-IRQ-stack.patch | 42 --------
...hange-28-to-thread_info-if-coming-from-us.patch | 48 ---------
...IPS-Switch-to-the-irq_stack-in-interrupts.patch | 116 ---------------------
...05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch | 21 ----
...ack-Fix-erroneous-jal-to-plat_irq_dispatc.patch | 35 -------
.../patches-4.4/630-packet_socket_type.patch | 4 +-
.../666-Add-support-for-MAP-E-FMRs-mesh-mode.patch | 22 ++--
...jecting-with-source-address-failed-policy.patch | 22 ++--
.../linux/lantiq/patches-4.4/0047-irq-fixes.patch | 4 +-
.../0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch | 87 ++++++++++++++++
...mtd-backport-v4.7-0day-patches-from-Boris.patch | 4 +-
...k-add-support-for-the-multiphy-carrier-pa.patch | 2 +-
...diatek-add-swconfig-driver-for-gsw_mt762x.patch | 2 +-
.../100-clk-sunxi-add-dram-gates-support.patch | 2 +-
.../107-clk-sunxi-add-h3-usbphy-clocks.patch | 2 +-
.../110-clk-sunxi-add-ve-for-sun457i.patch | 4 +-
25 files changed, 145 insertions(+), 430 deletions(-)
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 0a58a45..680f471 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -3,11 +3,11 @@
LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .43
-LINUX_VERSION-4.4 = .61
+LINUX_VERSION-4.4 = .69
LINUX_VERSION-4.9 = .20
LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
-LINUX_KERNEL_HASH-4.4.61 = 30dee7164615ad8184eba4ea6f4906b3ceb2fe462a8a4a929c8e9aab8d4a31da
+LINUX_KERNEL_HASH-4.4.69 = 207bbc50aaf827d667a2762312bd6127887cc669ff7a7270b876e7102b8f84fa
LINUX_KERNEL_HASH-4.9.20 = 48660806dd32fb8dcbcf5932291bf6cc7d29240070372230871e0f56fea81341
ifdef KERNEL_PATCHVER
diff --git a/target/linux/ar71xx/patches-4.4/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-4.4/525-MIPS-ath79-enable-qca-usb-quirks.patch
index 61b6b4e..0e33674 100644
--- a/target/linux/ar71xx/patches-4.4/525-MIPS-ath79-enable-qca-usb-quirks.patch
+++ b/target/linux/ar71xx/patches-4.4/525-MIPS-ath79-enable-qca-usb-quirks.patch
@@ -29,9 +29,7 @@
- u32 bootstrap;
+ void __iomem *phy_reg;
+ u32 t;
-
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++
+ phy_reg = ioremap(base, 4);
+ if (!phy_reg)
+ return;
@@ -43,7 +41,9 @@
+
+ iounmap(phy_reg);
+}
-+
+
+- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+static void ar934x_usb_reset_notifier(struct platform_device *pdev)
+{
+ if (pdev->id != -1)
diff --git a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
index 03ca106..e4d82ac 100644
--- a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
+++ b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
@@ -155,7 +155,7 @@
+#define AR934X_RESET_LUT BIT(2)
+#define AR934X_RESET_MBOX BIT(1)
+#define AR934X_RESET_I2S BIT(0)
-
++
+#define QCA955X_RESET_HOST BIT(31)
+#define QCA955X_RESET_SLIC BIT(30)
+#define QCA955X_RESET_HDMA BIT(29)
@@ -188,7 +188,7 @@
+#define QCA955X_RESET_LUT BIT(2)
+#define QCA955X_RESET_MBOX BIT(1)
+#define QCA955X_RESET_I2S BIT(0)
-+
+
+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
diff --git a/target/linux/ar71xx/patches-4.4/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.4/609-MIPS-ath79-ap136-fixes.patch
index 5d9d802..4d7902e 100644
--- a/target/linux/ar71xx/patches-4.4/609-MIPS-ath79-ap136-fixes.patch
+++ b/target/linux/ar71xx/patches-4.4/609-MIPS-ath79-ap136-fixes.patch
@@ -135,8 +135,7 @@
+static void __init ap136_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
@@ -151,7 +150,8 @@
+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-+
+
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+ ath79_register_mdio(0, 0x0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
+
@@ -211,16 +211,16 @@
+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
++
+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
+
+- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+- ath79_register_pci();
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
diff --git a/target/linux/ar71xx/patches-4.4/910-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-4.4/910-unaligned_access_hacks.patch
index e7df08b..7e3ba4c 100644
--- a/target/linux/ar71xx/patches-4.4/910-unaligned_access_hacks.patch
+++ b/target/linux/ar71xx/patches-4.4/910-unaligned_access_hacks.patch
@@ -310,7 +310,7 @@
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
-@@ -1407,7 +1407,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1409,7 +1409,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
dsfield = ipv6_get_dsfield(ipv6h);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
@@ -621,7 +621,7 @@
* XXX skbs on the gro_list have all been parsed and pulled
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
-@@ -43,7 +43,7 @@ struct prefix_info {
+@@ -45,7 +45,7 @@ struct prefix_info {
__be32 reserved2;
struct in6_addr prefix;
diff --git a/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch b/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch
index dfa9f6e..23b8e86 100644
--- a/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch
+++ b/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch
@@ -18,7 +18,7 @@
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
-@@ -883,7 +883,7 @@ static inline void ci_role_destroy(struc
+@@ -851,7 +851,7 @@ static inline void ci_role_destroy(struc
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
@@ -27,7 +27,7 @@
ci_hdrc_otg_destroy(ci);
}
-@@ -934,6 +934,9 @@ static int ci_hdrc_probe(struct platform
+@@ -902,6 +902,9 @@ static int ci_hdrc_probe(struct platform
ci->supports_runtime_pm = !!(ci->platdata->flags &
CI_HDRC_SUPPORTS_RUNTIME_PM);
@@ -37,7 +37,7 @@
ret = hw_device_init(ci, base);
if (ret < 0) {
dev_err(dev, "can't initialize hardware\n");
-@@ -999,7 +1002,7 @@ static int ci_hdrc_probe(struct platform
+@@ -967,7 +970,7 @@ static int ci_hdrc_probe(struct platform
goto deinit_phy;
}
@@ -48,7 +48,7 @@
dev_err(dev, "init otg fails, ret = %d\n", ret);
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
-@@ -95,8 +95,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
+@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
@@ -62,7 +62,7 @@
usb_gadget_vbus_connect(&ci->gadget);
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
-@@ -55,6 +55,7 @@ struct ci_hdrc_platform_data {
+@@ -57,6 +57,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
#define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
diff --git a/target/linux/generic/patches-4.4/040-0002-mtd-bcm47xxpart-don-t-fail-because-of-bit-flips.patch b/target/linux/generic/patches-4.4/040-0002-mtd-bcm47xxpart-don-t-fail-because-of-bit-flips.patch
index 8a04852..4155a2a 100644
--- a/target/linux/generic/patches-4.4/040-0002-mtd-bcm47xxpart-don-t-fail-because-of-bit-flips.patch
+++ b/target/linux/generic/patches-4.4/040-0002-mtd-bcm47xxpart-don-t-fail-because-of-bit-flips.patch
@@ -59,7 +59,7 @@ Signed-off-by: Brian Norris <computersforpeace at gmail.com>
continue;
}
-@@ -254,10 +258,11 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -252,10 +256,11 @@ static int bcm47xxpart_parse(struct mtd_
}
/* Read middle of the block */
@@ -75,7 +75,7 @@ Signed-off-by: Brian Norris <computersforpeace at gmail.com>
continue;
}
-@@ -277,10 +282,11 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -275,10 +280,11 @@ static int bcm47xxpart_parse(struct mtd_
}
offset = master->size - possible_nvram_sizes[i];
diff --git a/target/linux/generic/patches-4.4/042-0004-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch b/target/linux/generic/patches-4.4/042-0004-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
deleted file mode 100644
index 7eed777..0000000
--- a/target/linux/generic/patches-4.4/042-0004-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From bd5d21310133921021d78995ad6346f908483124 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Sun, 20 Nov 2016 16:09:30 +0100
-Subject: [PATCH] mtd: bcm47xxpart: fix parsing first block after aligned TRX
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-After parsing TRX we should skip to the first block placed behind it.
-Our code was working only with TRX with length not aligned to the
-blocksize. In other cases (length aligned) it was missing the block
-places right after TRX.
-
-This fixes calculation and simplifies the comment.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace at gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -229,12 +229,10 @@ static int bcm47xxpart_parse(struct mtd_
-
- last_trx_part = curr_part - 1;
-
-- /*
-- * We have whole TRX scanned, skip to the next part. Use
-- * roundown (not roundup), as the loop will increase
-- * offset in next step.
-- */
-- offset = rounddown(offset + trx->length, blocksize);
-+ /* Jump to the end of TRX */
-+ offset = roundup(offset + trx->length, blocksize);
-+ /* Next loop iteration will increase the offset */
-+ offset -= blocksize;
- continue;
- }
-
diff --git a/target/linux/generic/patches-4.4/062-01-MIPS-Introduce-irq_stack.patch b/target/linux/generic/patches-4.4/062-01-MIPS-Introduce-irq_stack.patch
deleted file mode 100644
index 2a929aa..0000000
--- a/target/linux/generic/patches-4.4/062-01-MIPS-Introduce-irq_stack.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:56 +0000
-Subject: [PATCH] MIPS: Introduce irq_stack
-
-Allocate a per-cpu irq stack for use within interrupt handlers.
-
-Also add a utility function on_irq_stack to determine if a given stack
-pointer is within the irq stack for that cpu.
-
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
----
-
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -17,6 +17,18 @@
-
- #include <irq.h>
-
-+#define IRQ_STACK_SIZE THREAD_SIZE
-+
-+extern void *irq_stack[NR_CPUS];
-+
-+static inline bool on_irq_stack(int cpu, unsigned long sp)
-+{
-+ unsigned long low = (unsigned long)irq_stack[cpu];
-+ unsigned long high = low + IRQ_STACK_SIZE;
-+
-+ return (low <= sp && sp <= high);
-+}
-+
- #ifdef CONFIG_I8259
- static inline int irq_canonicalize(int irq)
- {
---- a/arch/mips/kernel/asm-offsets.c
-+++ b/arch/mips/kernel/asm-offsets.c
-@@ -101,6 +101,7 @@ void output_thread_info_defines(void)
- OFFSET(TI_REGS, thread_info, regs);
- DEFINE(_THREAD_SIZE, THREAD_SIZE);
- DEFINE(_THREAD_MASK, THREAD_MASK);
-+ DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
- BLANK();
- }
-
---- a/arch/mips/kernel/irq.c
-+++ b/arch/mips/kernel/irq.c
-@@ -25,6 +25,8 @@
- #include <linux/atomic.h>
- #include <asm/uaccess.h>
-
-+void *irq_stack[NR_CPUS];
-+
- /*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
-@@ -55,6 +57,15 @@ void __init init_IRQ(void)
- irq_set_noprobe(i);
-
- arch_init_irq();
-+
-+ for_each_possible_cpu(i) {
-+ int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
-+ void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
-+
-+ irq_stack[i] = s;
-+ pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
-+ irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE);
-+ }
- }
-
- #ifdef CONFIG_DEBUG_STACKOVERFLOW
diff --git a/target/linux/generic/patches-4.4/062-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch b/target/linux/generic/patches-4.4/062-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
deleted file mode 100644
index fc559ee..0000000
--- a/target/linux/generic/patches-4.4/062-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:57 +0000
-Subject: [PATCH] MIPS: Stack unwinding while on IRQ stack
-
-Within unwind stack, check if the stack pointer being unwound is within
-the CPU's irq_stack and if so use that page rather than the task's stack
-page.
-
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -32,6 +32,7 @@
- #include <asm/cpu.h>
- #include <asm/dsp.h>
- #include <asm/fpu.h>
-+#include <asm/irq.h>
- #include <asm/msa.h>
- #include <asm/pgtable.h>
- #include <asm/mipsregs.h>
-@@ -552,7 +553,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
- unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
- unsigned long pc, unsigned long *ra)
- {
-- unsigned long stack_page = (unsigned long)task_stack_page(task);
-+ unsigned long stack_page = 0;
-+ int cpu;
-+
-+ for_each_possible_cpu(cpu) {
-+ if (on_irq_stack(cpu, *sp)) {
-+ stack_page = (unsigned long)irq_stack[cpu];
-+ break;
-+ }
-+ }
-+
-+ if (!stack_page)
-+ stack_page = (unsigned long)task_stack_page(task);
-+
- return unwind_stack_by_address(stack_page, sp, pc, ra);
- }
- #endif
diff --git a/target/linux/generic/patches-4.4/062-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch b/target/linux/generic/patches-4.4/062-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
deleted file mode 100644
index e13c67b..0000000
--- a/target/linux/generic/patches-4.4/062-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:58 +0000
-Subject: [PATCH] MIPS: Only change $28 to thread_info if coming from user
- mode
-
-The SAVE_SOME macro is used to save the execution context on all
-exceptions.
-If an exception occurs while executing user code, the stack is switched
-to the kernel's stack for the current task, and register $28 is switched
-to point to the current_thread_info, which is at the bottom of the stack
-region.
-If the exception occurs while executing kernel code, the stack is left,
-and this change ensures that register $28 is not updated. This is the
-correct behaviour when the kernel can be executing on the separate irq
-stack, because the thread_info will not be at the base of it.
-
-With this change, register $28 is only switched to it's kernel
-conventional usage of the currrent thread info pointer at the point at
-which execution enters kernel space. Doing it on every exception was
-redundant, but OK without an IRQ stack, but will be erroneous once that
-is introduced.
-
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
-Reviewed-by: Maciej W. Rozycki <macro at imgtec.com>
----
-
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -216,12 +216,19 @@
- LONG_S $25, PT_R25(sp)
- LONG_S $28, PT_R28(sp)
- LONG_S $31, PT_R31(sp)
-+
-+ /* Set thread_info if we're coming from user mode */
-+ mfc0 k0, CP0_STATUS
-+ sll k0, 3 /* extract cu0 bit */
-+ bltz k0, 9f
-+
- ori $28, sp, _THREAD_MASK
- xori $28, _THREAD_MASK
- #ifdef CONFIG_CPU_CAVIUM_OCTEON
- .set mips64
- pref 0, 0($28) /* Prefetch the current pointer */
- #endif
-+9:
- .set pop
- .endm
-
diff --git a/target/linux/generic/patches-4.4/062-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch b/target/linux/generic/patches-4.4/062-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
deleted file mode 100644
index 9bd2336..0000000
--- a/target/linux/generic/patches-4.4/062-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:59 +0000
-Subject: [PATCH] MIPS: Switch to the irq_stack in interrupts
-
-When enterring interrupt context via handle_int or except_vec_vi, switch
-to the irq_stack of the current CPU if it is not already in use.
-
-The current stack pointer is masked with the thread size and compared to
-the base or the irq stack. If it does not match then the stack pointer
-is set to the top of that stack, otherwise this is a nested irq being
-handled on the irq stack so the stack pointer should be left as it was.
-
-The in-use stack pointer is placed in the callee saved register s1. It
-will be saved to the stack when plat_irq_dispatch is invoked and can be
-restored once control returns here.
-
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
----
-
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -188,9 +188,44 @@ NESTED(handle_int, PT_SIZE, sp)
-
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
-- PTR_LA ra, ret_from_irq
-- PTR_LA v0, plat_irq_dispatch
-- jr v0
-+
-+ /*
-+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
-+ * Check if we are already using the IRQ stack.
-+ */
-+ move s1, sp # Preserve the sp
-+
-+ /* Get IRQ stack for this CPU */
-+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
-+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
-+ lui k1, %hi(irq_stack)
-+#else
-+ lui k1, %highest(irq_stack)
-+ daddiu k1, %higher(irq_stack)
-+ dsll k1, 16
-+ daddiu k1, %hi(irq_stack)
-+ dsll k1, 16
-+#endif
-+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
-+ LONG_ADDU k1, k0
-+ LONG_L t0, %lo(irq_stack)(k1)
-+
-+ # Check if already on IRQ stack
-+ PTR_LI t1, ~(_THREAD_SIZE-1)
-+ and t1, t1, sp
-+ beq t0, t1, 2f
-+
-+ /* Switch to IRQ stack */
-+ li t1, _IRQ_STACK_SIZE
-+ PTR_ADD sp, t0, t1
-+
-+2:
-+ jal plat_irq_dispatch
-+
-+ /* Restore sp */
-+ move sp, s1
-+
-+ j ret_from_irq
- #ifdef CONFIG_CPU_MICROMIPS
- nop
- #endif
-@@ -263,8 +298,44 @@ NESTED(except_vec_vi_handler, 0, sp)
-
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
-- PTR_LA ra, ret_from_irq
-- jr v0
-+
-+ /*
-+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
-+ * Check if we are already using the IRQ stack.
-+ */
-+ move s1, sp # Preserve the sp
-+
-+ /* Get IRQ stack for this CPU */
-+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
-+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
-+ lui k1, %hi(irq_stack)
-+#else
-+ lui k1, %highest(irq_stack)
-+ daddiu k1, %higher(irq_stack)
-+ dsll k1, 16
-+ daddiu k1, %hi(irq_stack)
-+ dsll k1, 16
-+#endif
-+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
-+ LONG_ADDU k1, k0
-+ LONG_L t0, %lo(irq_stack)(k1)
-+
-+ # Check if already on IRQ stack
-+ PTR_LI t1, ~(_THREAD_SIZE-1)
-+ and t1, t1, sp
-+ beq t0, t1, 2f
-+
-+ /* Switch to IRQ stack */
-+ li t1, _IRQ_STACK_SIZE
-+ PTR_ADD sp, t0, t1
-+
-+2:
-+ jal plat_irq_dispatch
-+
-+ /* Restore sp */
-+ move sp, s1
-+
-+ j ret_from_irq
- END(except_vec_vi_handler)
-
- /*
diff --git a/target/linux/generic/patches-4.4/062-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch b/target/linux/generic/patches-4.4/062-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
deleted file mode 100644
index a4942b8..0000000
--- a/target/linux/generic/patches-4.4/062-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Mon, 19 Dec 2016 14:21:00 +0000
-Subject: [PATCH] MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK
-
-Since do_IRQ is now invoked on a separate IRQ stack, we select
-HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly
-from irq_exit(), rather than requiring do_softirq_own_stack.
-
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
----
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -9,6 +9,7 @@ config MIPS
- select HAVE_CONTEXT_TRACKING
- select HAVE_GENERIC_DMA_COHERENT
- select HAVE_IDE
-+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
- select HAVE_OPROFILE
- select HAVE_PERF_EVENTS
- select PERF_USE_VMALLOC
diff --git a/target/linux/generic/patches-4.4/062-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch b/target/linux/generic/patches-4.4/062-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
deleted file mode 100644
index 26cf5c4..0000000
--- a/target/linux/generic/patches-4.4/062-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From de856416e7143e32afc4849625616554aa060f7a Mon Sep 17 00:00:00 2001
-From: Matt Redfearn <matt.redfearn at imgtec.com>
-Date: Wed, 25 Jan 2017 17:00:25 +0000
-Subject: [PATCH] MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
-
-Commit dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
-changed both the normal and vectored interrupt handlers. Unfortunately
-the vectored version, "except_vec_vi_handler", was incorrectly modified
-to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
-the vectored handler that has been set up. This is ok for many platforms
-which set the vectored handler to plat_irq_dispatch anyway, but will
-cause problems with platforms that use other handlers.
-
-Fixes: dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
-Signed-off-by: Matt Redfearn <matt.redfearn at imgtec.com>
-Cc: Ralf Baechle <ralf at linux-mips.org>
-Cc: Paul Burton <paul.burton at imgtec.com>
-Cc: linux-mips at linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/15110/
-Signed-off-by: James Hogan <james.hogan at imgtec.com>
----
- arch/mips/kernel/genex.S | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -330,7 +330,7 @@ NESTED(except_vec_vi_handler, 0, sp)
- PTR_ADD sp, t0, t1
-
- 2:
-- jal plat_irq_dispatch
-+ jalr v0
-
- /* Restore sp */
- move sp, s1
diff --git a/target/linux/generic/patches-4.4/630-packet_socket_type.patch b/target/linux/generic/patches-4.4/630-packet_socket_type.patch
index c334418..d308786 100644
--- a/target/linux/generic/patches-4.4/630-packet_socket_type.patch
+++ b/target/linux/generic/patches-4.4/630-packet_socket_type.patch
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
-@@ -3737,6 +3740,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3739,6 +3742,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
@@ -108,7 +108,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
default:
return -ENOPROTOOPT;
}
-@@ -3789,6 +3802,13 @@ static int packet_getsockopt(struct sock
+@@ -3791,6 +3804,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;
diff --git a/target/linux/generic/patches-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/patches-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
index da8e8a6..c402e04 100644
--- a/target/linux/generic/patches-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ b/target/linux/generic/patches-4.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
@@ -296,7 +296,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
__skb_tunnel_rx(skb, t->dev, t->net);
-@@ -1245,6 +1382,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1247,6 +1384,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
__u32 mtu;
u8 tproto;
int err;
@@ -304,7 +304,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
tproto = ACCESS_ONCE(t->parms.proto);
if ((tproto != IPPROTO_IPV6 && tproto != 0) ||
-@@ -1275,6 +1413,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1277,6 +1415,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
@@ -323,7 +323,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
err = ip6_tnl_xmit2(skb, dev, dsfield, &fl6, encap_limit, &mtu);
if (err != 0) {
if (err == -EMSGSIZE)
-@@ -1389,6 +1539,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+@@ -1391,6 +1541,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
t->parms.flowinfo = p->flowinfo;
t->parms.link = p->link;
t->parms.proto = p->proto;
@@ -338,7 +338,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
ip6_tnl_dst_reset(t);
ip6_tnl_link_config(t);
return 0;
-@@ -1427,6 +1585,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+@@ -1429,6 +1587,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
p->flowinfo = u->flowinfo;
p->link = u->link;
p->proto = u->proto;
@@ -346,7 +346,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
memcpy(p->name, u->name, sizeof(u->name));
}
-@@ -1722,6 +1881,15 @@ static int ip6_tnl_validate(struct nlatt
+@@ -1724,6 +1883,15 @@ static int ip6_tnl_validate(struct nlatt
return 0;
}
@@ -362,7 +362,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
static void ip6_tnl_netlink_parms(struct nlattr *data[],
struct __ip6_tnl_parm *parms)
{
-@@ -1753,6 +1921,46 @@ static void ip6_tnl_netlink_parms(struct
+@@ -1755,6 +1923,46 @@ static void ip6_tnl_netlink_parms(struct
if (data[IFLA_IPTUN_PROTO])
parms->proto = nla_get_u8(data[IFLA_IPTUN_PROTO]);
@@ -409,7 +409,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
}
static int ip6_tnl_newlink(struct net *src_net, struct net_device *dev,
-@@ -1805,6 +2013,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -1807,6 +2015,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
@@ -422,7 +422,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
-@@ -1822,6 +2036,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -1824,6 +2038,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(4) +
/* IFLA_IPTUN_PROTO */
nla_total_size(1) +
@@ -447,7 +447,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
0;
}
-@@ -1829,6 +2061,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -1831,6 +2063,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
@@ -457,7 +457,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -1837,8 +2072,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -1839,8 +2074,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
@@ -486,7 +486,7 @@ Signed-off-by: Steven Barth <cyrus at openwrt.org>
return 0;
nla_put_failure:
-@@ -1862,6 +2116,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -1864,6 +2118,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_FLOWINFO] = { .type = NLA_U32 },
[IFLA_IPTUN_FLAGS] = { .type = NLA_U32 },
[IFLA_IPTUN_PROTO] = { .type = NLA_U8 },
diff --git a/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
index a82073b..e3f60e2 100644
--- a/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ b/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -143,7 +143,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
static const struct rt6_info ip6_blk_hole_entry_template = {
.dst = {
.__refcnt = ATOMIC_INIT(1),
-@@ -1885,6 +1902,11 @@ static struct rt6_info *ip6_route_info_c
+@@ -1889,6 +1906,11 @@ static struct rt6_info *ip6_route_info_c
rt->dst.output = ip6_pkt_prohibit_out;
rt->dst.input = ip6_pkt_prohibit;
break;
@@ -155,7 +155,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
case RTN_THROW:
case RTN_UNREACHABLE:
default:
-@@ -2486,6 +2508,17 @@ static int ip6_pkt_prohibit_out(struct n
+@@ -2492,6 +2514,17 @@ static int ip6_pkt_prohibit_out(struct n
return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
}
@@ -173,7 +173,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
/*
* Allocate a dst for local (unicast / anycast) address.
*/
-@@ -2728,7 +2761,8 @@ static int rtm_to_fib6_config(struct sk_
+@@ -2734,7 +2767,8 @@ static int rtm_to_fib6_config(struct sk_
if (rtm->rtm_type == RTN_UNREACHABLE ||
rtm->rtm_type == RTN_BLACKHOLE ||
rtm->rtm_type == RTN_PROHIBIT ||
@@ -183,7 +183,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
cfg->fc_flags |= RTF_REJECT;
if (rtm->rtm_type == RTN_LOCAL)
-@@ -3087,6 +3121,9 @@ static int rt6_fill_node(struct net *net
+@@ -3093,6 +3127,9 @@ static int rt6_fill_node(struct net *net
case -EACCES:
rtm->rtm_type = RTN_PROHIBIT;
break;
@@ -193,7 +193,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
case -EAGAIN:
rtm->rtm_type = RTN_THROW;
break;
-@@ -3363,6 +3400,8 @@ static int ip6_route_dev_notify(struct n
+@@ -3372,6 +3409,8 @@ static int ip6_route_dev_notify(struct n
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.ip6_prohibit_entry->dst.dev = dev;
net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
#endif
-@@ -3579,6 +3618,17 @@ static int __net_init ip6_route_net_init
+@@ -3594,6 +3633,17 @@ static int __net_init ip6_route_net_init
net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
ip6_template_metrics, true);
@@ -220,7 +220,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
#endif
net->ipv6.sysctl.flush_delay = 0;
-@@ -3597,6 +3647,8 @@ out:
+@@ -3612,6 +3662,8 @@ out:
return ret;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -229,7 +229,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
out_ip6_prohibit_entry:
kfree(net->ipv6.ip6_prohibit_entry);
out_ip6_null_entry:
-@@ -3614,6 +3666,7 @@ static void __net_exit ip6_route_net_exi
+@@ -3629,6 +3681,7 @@ static void __net_exit ip6_route_net_exi
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
kfree(net->ipv6.ip6_blk_hole_entry);
@@ -237,7 +237,7 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
#endif
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
-@@ -3711,6 +3764,9 @@ int __init ip6_route_init(void)
+@@ -3702,6 +3755,9 @@ void __init ip6_route_init_special_entri
init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
@@ -245,5 +245,5 @@ Signed-off-by: Jonas Gorski <jogo at openwrt.org>
+ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
+ in6_dev_get(init_net.loopback_dev);
#endif
- ret = fib6_init();
- if (ret)
+ }
+
diff --git a/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch b/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch
index f664deb..9efa63d 100644
--- a/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch
+++ b/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch
@@ -45,7 +45,7 @@
/* disable */
ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i),
LTQ_EIU_EXIN_INEN);
-@@ -344,10 +344,10 @@ static int icu_map(struct irq_domain *d,
+@@ -343,10 +343,10 @@ static int icu_map(struct irq_domain *d,
return 0;
for (i = 0; i < exin_avail; i++)
@@ -58,7 +58,7 @@
return 0;
}
-@@ -437,14 +437,14 @@ int __init icu_of_init(struct device_nod
+@@ -441,14 +441,14 @@ int __init icu_of_init(struct device_nod
eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
/* find out how many external irq sources we have */
diff --git a/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch b/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch
new file mode 100644
index 0000000..c0d7afc
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch
@@ -0,0 +1,87 @@
+From: Felix Fietkau <nbd at nbd.name>
+Date: Thu, 19 Jan 2017 12:14:44 +0100
+Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup
+
+With the IRQ stack changes integrated, the XRX200 devices started
+emitting a constant stream of kernel messages like this:
+
+[ 565.415310] Spurious IRQ: CAUSE=0x1100c300
+
+This appears to be caused by IP0 firing for some reason without being
+handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and
+calling do_IRQ for all MIPS CPU interrupts.
+
+Cc: john at phrozen.org
+Cc: stable at vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd at nbd.name>
+---
+
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void)
+ DEFINE_HWx_IRQDISPATCH(5)
+ #endif
+
++static void ltq_hw_irq_handler(struct irq_desc *desc)
++{
++ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
++}
++
+ #ifdef CONFIG_MIPS_MT_SMP
+ void __init arch_init_ipiirq(int irq, struct irqaction *action)
+ {
+@@ -315,23 +320,19 @@ static struct irqaction irq_call = {
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+- unsigned int i;
++ int irq;
+
+- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) {
+- do_IRQ(MIPS_CPU_TIMER_IRQ);
+- goto out;
+- } else {
+- for (i = 0; i < MAX_IM; i++) {
+- if (pending & (CAUSEF_IP2 << i)) {
+- ltq_hw_irqdispatch(i);
+- goto out;
+- }
+- }
++ if (!pending) {
++ spurious_interrupt();
++ return;
+ }
+- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+
+-out:
+- return;
++ pending >>= CAUSEB_IP;
++ while (pending) {
++ irq = fls(pending) - 1;
++ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
++ pending &= ~BIT(irq);
++ }
+ }
+
+ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d
+ .map = icu_map,
+ };
+
+-static struct irqaction cascade = {
+- .handler = no_action,
+- .name = "cascade",
+-};
+-
+ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ {
+ struct device_node *eiu_node;
+@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod
+ mips_cpu_irq_init();
+
+ for (i = 0; i < MAX_IM; i++)
+- setup_irq(i + 2, &cascade);
++ irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
+
+ if (cpu_has_vint) {
+ pr_info("Setting up vectored interrupts\n");
diff --git a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
index b45d3aa..4b25d18 100644
--- a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
+++ b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
@@ -4672,7 +4672,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
int INFTL_mount(struct INFTLrecord *s);
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
-@@ -142,7 +142,9 @@
+@@ -137,7 +137,9 @@
#endif
#ifndef map_bankwidth
@@ -4682,7 +4682,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
static inline int map_bankwidth(void *map)
{
BUG();
-@@ -238,8 +240,11 @@ struct map_info {
+@@ -233,8 +235,11 @@ struct map_info {
If there is no cache to care about this can be set to NULL. */
void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
diff --git a/target/linux/ramips/patches-4.4/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch b/target/linux/ramips/patches-4.4/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
index 4d5c2d8..643c687 100644
--- a/target/linux/ramips/patches-4.4/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
+++ b/target/linux/ramips/patches-4.4/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
@@ -25,7 +25,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
return IRQ_HANDLED;
--- a/drivers/net/ethernet/mediatek/gsw_mt7620.h
+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
-@@ -113,5 +113,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *g
+@@ -119,5 +119,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *g
u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
u32 phy_register, u32 write_data);
u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
diff --git a/target/linux/ramips/patches-4.4/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch b/target/linux/ramips/patches-4.4/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
index 10db076..35d1bd0 100644
--- a/target/linux/ramips/patches-4.4/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
+++ b/target/linux/ramips/patches-4.4/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
@@ -51,7 +51,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
#define GSW_REG_SMACCR0 0x3fE4
-@@ -76,6 +78,7 @@
+@@ -82,6 +84,7 @@
#define PHY_PRE_EN BIT(30)
#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
diff --git a/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch b/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch
index 4d353f3..a94e9b8 100644
--- a/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch
+++ b/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch
@@ -21,7 +21,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
--- a/drivers/clk/sunxi/clk-simple-gates.c
+++ b/drivers/clk/sunxi/clk-simple-gates.c
-@@ -158,3 +158,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner
+@@ -160,3 +160,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner
sun4i_a10_ahb_init);
CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk",
sun4i_a10_ahb_init);
diff --git a/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch b/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch
index ddd5e97..c845d51 100644
--- a/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch
+++ b/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch
@@ -19,7 +19,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -68,6 +68,7 @@ Required properties:
+@@ -70,6 +70,7 @@ Required properties:
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
"allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
diff --git a/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch b/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch
index 780e034..f929753 100644
--- a/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch
+++ b/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch
@@ -22,7 +22,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -71,6 +71,7 @@ Required properties:
+@@ -73,6 +73,7 @@ Required properties:
"allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
@@ -30,7 +30,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Required properties for all clocks:
- reg : shall be the control register address for the clock.
-@@ -90,6 +91,9 @@ Required properties for all clocks:
+@@ -92,6 +93,9 @@ Required properties for all clocks:
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
More information about the lede-commits
mailing list