[source] ar71xx: add support for 8devices Rambutan development board
LEDE Commits
lede-commits at lists.infradead.org
Mon May 15 14:03:40 PDT 2017
pepe2k pushed a commit to source.git, branch master:
https://git.lede-project.org/68b5d34f69421264de6e5d77760fcc2bfe9ee687
commit 68b5d34f69421264de6e5d77760fcc2bfe9ee687
Author: Mantas Pucka <mantas at 8devices.com>
AuthorDate: Mon May 8 13:28:38 2017 +0300
ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan
This commit adds basic support for Rambutan development kit
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header
Flash instructions:
Stock firmware is OpenWrt, so use:
sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
nand erase.part ubi
nand write 80060000 ubi ${filesize}
Signed-off-by: Mantas Pucka <mantas at 8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 3 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../base-files/lib/preinit/05_set_iface_mac_ar71xx | 6 ++
.../ar71xx/base-files/lib/upgrade/platform.sh | 2 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-rambutan.c | 90 ++++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/nand.mk | 14 ++++
target/linux/ar71xx/nand/config-default | 1 +
11 files changed, 132 insertions(+)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 945167b..4db1b14 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -74,6 +74,9 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "caldata" 4096 2048
ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0)
;;
+ rambutan)
+ ath9k_eeprom_extract "art" 4096 2048
+ ;;
z1)
. /lib/upgrade/nand.sh
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 92ee516..5c3b1a7 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -811,6 +811,9 @@ ar71xx_board_detect() {
*"R6100")
name="r6100"
;;
+ *"Rambutan"*)
+ name="rambutan"
+ ;;
*"RE450")
name="re450"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index 50f59de..277287d 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -44,6 +44,12 @@ preinit_set_mac_address() {
mac_wan=$(mtd_get_mac_binary caldata 6)
[ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
;;
+ rambutan)
+ mac_lan=$(mtd_get_mac_binary art 0)
+ [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+ mac_wan=$(mtd_get_mac_binary art 6)
+ [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan"
+ ;;
tew-632brp)
fetch_mac_from_mtd config lan_mac wan_mac
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 5be678e..8ebdea3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -521,6 +521,7 @@ platform_check_image() {
c-60|\
nbg6716|\
r6100|\
+ rambutan|\
wndr3700v4|\
wndr4300)
nand_do_platform_check $board $1
@@ -663,6 +664,7 @@ platform_pre_upgrade() {
c-60|\
nbg6716|\
r6100|\
+ rambutan|\
rb-411|\
rb-411u|\
rb-433|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 6d0941b..380254d 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -146,6 +146,7 @@ CONFIG_ATH79_MACH_PQI_AIR_PEN=y
CONFIG_ATH79_MACH_QIHOO_C301=y
CONFIG_ATH79_MACH_R602N=y
CONFIG_ATH79_MACH_R6100=y
+# CONFIG_ATH79_MACH_RAMBUTAN is not set
# CONFIG_ATH79_MACH_RB2011 is not set
# CONFIG_ATH79_MACH_RB4XX is not set
# CONFIG_ATH79_MACH_RB750 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 7c3aa77..eb8219e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1897,6 +1897,16 @@ config ATH79_MACH_LIMA
select ATH79_DEV_WMAC
select ATH79_DEV_ETH
+config ATH79_MACH_RAMBUTAN
+ bool "8devices Rambutan board"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_CF_E316N_V2
bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 01ec133..f503002 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
+obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o
obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
new file mode 100644
index 0000000..103aeb4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
@@ -0,0 +1,90 @@
+/*
+ * 8devices Rambutan board support
+ *
+ * Copyright (C) 2017 Mantas Pucka <mantas at 8devices.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform/ar934x_nfc.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+static struct at803x_platform_data rambutan_ar8032_data = {
+ .has_reset_gpio = 1,
+ .reset_gpio = 17,
+};
+
+static struct mdio_board_info rambutan_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rambutan_ar8032_data,
+ },
+};
+
+static struct at803x_platform_data rambutan_ar8033_data = {
+ .has_reset_gpio = 1,
+ .reset_gpio = 23,
+};
+
+static struct mdio_board_info rambutan_mdio1_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.1",
+ .phy_addr = 0,
+ .platform_data = &rambutan_ar8033_data,
+ },
+};
+
+static void __init rambutan_setup(void)
+{
+ ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
+ ath79_register_nfc();
+ ath79_register_usb();
+ ath79_register_pci();
+ ath79_register_wmac_simple();
+
+ mdiobus_register_board_info(rambutan_mdio0_info,
+ ARRAY_SIZE(rambutan_mdio0_info));
+ mdiobus_register_board_info(rambutan_mdio1_info,
+ ARRAY_SIZE(rambutan_mdio1_info));
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.phy_mask = BIT(0);
+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x17000000;
+ ath79_eth1_pll_data.pll_10 = 0x1313;
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board",
+ rambutan_setup);
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 694470d..4f0ae32 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -155,6 +155,7 @@ enum ath79_mach_type {
ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
ATH79_MACH_R602N, /* P&W R602N */
ATH79_MACH_R6100, /* NETGEAR R6100 */
+ ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk
index 15e0809..dfe78c2 100644
--- a/target/linux/ar71xx/image/nand.mk
+++ b/target/linux/ar71xx/image/nand.mk
@@ -52,6 +52,20 @@ define Build/MerakiNAND-old
@mv $@.new $@
endef
+define Device/rambutan
+ DEVICE_TITLE := 8devices Rambutan
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = RAMBUTAN
+ BLOCKSIZE = 128KiB
+ MTDPARTS = ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi)
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ IMAGES := factory.ubi sysupgrade.tar
+ IMAGE/sysupgrade.tar := sysupgrade-tar
+ IMAGE/factory.ubi := append-ubi
+endef
+TARGET_DEVICES += rambutan
+
define Device/z1
DEVICE_TITLE := Meraki Z1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 1c5d0ba..9b57f90 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -106,6 +106,7 @@
# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set
# CONFIG_ATH79_MACH_QIHOO_C301 is not set
# CONFIG_ATH79_MACH_R602N is not set
+CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_RE450 is not set
# CONFIG_ATH79_MACH_RW2458N is not set
# CONFIG_ATH79_MACH_SC1750 is not set
More information about the lede-commits
mailing list