[source] kirkwood: set sata/usb led trigger for NSA3xx

[LEDE Commits]

jow pushed a commit to source.git, branch master:
https://git.lede-project.org/f7fd2abf259c7a463d215fc0e52c15ae77a050de

commit f7fd2abf259c7a463d215fc0e52c15ae77a050de
Author: Alberto Bursi <alberto.bursi at outlook.it>
AuthorDate: Thu Mar 30 12:34:42 2017 +0200

    kirkwood: set sata/usb led trigger for NSA3xx
    
    these two devices have a Sata led for each sata port.
    These leds must be controlled separately by a special
    sata led trigger already used in oxnas target.
    
    Both these devices have a single USB led, and to keep
    consistent behaviour with the Sata leds that show
    sata activity, this led uses usb-host trigger
    to show usb activity.
    
    Signed-off-by: Alberto Bursi <alberto.bursi at outlook.it>
---
 target/linux/kirkwood/base-files/etc/board.d/01_leds           |  6 ++++++
 target/linux/kirkwood/config-4.4                               |  3 +++
 .../210-enable-sata-port-specific-led-triggers.patch           | 10 ++++++++++
 3 files changed, 19 insertions(+)

diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
index e6da9fd..0608440 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/01_leds
+++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -40,9 +40,15 @@ case "$board" in
 	;;
 "nsa310b")
 	ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
+	ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb"
+	ucidef_set_led_ataport "hdd" "HDD" "nsa310:green:hdd" "1"
+	ucidef_set_led_ataport "esata" "eSata" "nsa310:green:esata" "2"
 	;;
 "nsa325")
 	ucidef_set_led_default "health" "health" "nsa325:green:sys" "1"
+	ucidef_set_led_usbhost "usb" "USB" "nsa325:green:usb"
+	ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1"
+	ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:sata2" "2"
 	;;
 "sheevaplug" | \
 "sheevaplug-esata")
diff --git a/target/linux/kirkwood/config-4.4 b/target/linux/kirkwood/config-4.4
index f5d3164..67a8760 100644
--- a/target/linux/kirkwood/config-4.4
+++ b/target/linux/kirkwood/config-4.4
@@ -26,6 +26,7 @@ CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
 CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_WANT_LIBATA_LEDS=y
 CONFIG_ARM=y
 # CONFIG_ARMADA_THERMAL is not set
 CONFIG_ARM_APPENDED_DTB=y
@@ -41,6 +42,7 @@ CONFIG_ARM_PATCH_PHYS_VIRT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ATA=y
 CONFIG_ATAGS=y
+CONFIG_ATA_LEDS=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CACHE_FEROCEON_L2=y
@@ -306,6 +308,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_ORION=y
 # CONFIG_USB_EHCI_HCD_PLATFORM is not set
 CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_LED_TRIG=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_UHCI_HCD is not set
diff --git a/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch
new file mode 100644
index 0000000..96c4f7b
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -105,6 +105,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+ 	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+ 	select ARCH_REQUIRE_GPIOLIB
++	select ARCH_WANT_LIBATA_LEDS
+ 	select CPU_FEROCEON
+ 	select KIRKWOOD_CLK
+ 	select MACH_MVEBU_ANY