[source] x86: drop ep80579-drivers

LEDE Commits lede-commits at lists.infradead.org
Wed Mar 1 11:38:39 PST 2017


jow pushed a commit to source.git, branch lede-17.01:
https://git.lede-project.org/c5d8d8fd64c2ff0d46ac05124153af3d1b763bde

commit c5d8d8fd64c2ff0d46ac05124153af3d1b763bde
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Thu Jan 19 09:03:13 2017 +0100

    x86: drop ep80579-drivers
    
    The subtarget on which the driver still depends was removed with
    dee8986b95dcc200550faebe49c143e5d2357c60 because it was unmaintained
    for a long time.
    
    Signed-off-by: Mathias Kresin <dev at kresin.me>
---
 package/kernel/ep80579-drivers/Makefile            |    92 -
 .../ep80579-drivers/patches/001-igbe_update.patch  | 11755 -------------------
 .../patches/002-cflags_cleanup.patch               |    22 -
 .../patches/003-new_irqf_constants.patch           |    53 -
 .../patches/100-iegbe_netdev_ops.patch             |    56 -
 .../patches/101-iegbe_fix_napi_interface.patch     |    41 -
 .../patches/102-iegbe_nuke_polling_netdev.patch    |   103 -
 .../103-iegbe_convert_unicast_addr_list.patch      |    60 -
 ...04-iegbe_group_address_list_and_its_count.patch |    20 -
 .../patches/105-iegbe_new_dma_masks.patch          |    20 -
 .../patches/106-iegbe_new_irqf_constant.patch      |    12 -
 .../patches/150-ocracoke_island.patch              |   747 --
 .../patches/200-can_fix_ioctl_numbers.patch        |    11 -
 .../patches/210-can_include_linux_fs_h.patch       |    11 -
 .../patches/220-can_fix_irq_request.patch          |    23 -
 .../230-can_remove_driver_data_direct_access.patch |    40 -
 .../patches/300-wdt_compile_fix.patch              |    59 -
 .../patches/400-edma_fix_irq_request_warning.patch |    22 -
 .../patches/500-1588_fix_irq_request_warning.patch |    22 -
 .../patches/600-2.6.27_includes.patch              |    22 -
 .../patches/601-2.6.32_includes.patch              |    30 -
 .../patches/700-iegbe_kcompat_2.6.30.patch         |    31 -
 .../patches/701-iegbe_poll_dev.patch               |    11 -
 .../710-3.3-fix-generated-header-locations.patch   |    91 -
 .../patches/711-3.3-gbe-fixes.patch                |   392 -
 .../patches/712-3.3-can-fixes.patch                |    41 -
 .../patches/713-3.3-gpio-fixes.patch               |    33 -
 .../patches/714-3.3-wdt-fixes.patch                |    31 -
 .../patches/715-3.3-1588-fixes.patch               |    33 -
 29 files changed, 13884 deletions(-)

diff --git a/package/kernel/ep80579-drivers/Makefile b/package/kernel/ep80579-drivers/Makefile
deleted file mode 100644
index 444157e..0000000
--- a/package/kernel/ep80579-drivers/Makefile
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ep80579-drivers
-PKG_VERSION:=1.0.34
-PKG_RELEASE:=1
-
-PKG_SOURCE:=Embedded.L.1.0.34.ADI.R100.tar.gz
-PKG_SOURCE_URL:=ftp://ftp.adiengineering.com/Archive/OcracokeIsland/Drivers/Linux/1.0.34/
-PKG_HASH:=f00684176a3dd1dc9ea8d96ecd1ecade5103f351ed93b9e3a5ff5f3f3295e2a9
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/ep80579-drivers/Default
-  DEPENDS:=@TARGET_x86_ep80579
-endef
-
-define KernelPackage/ep80579-eth
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Network Devices
-  TITLE:=Intel EP80579 ethernet driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/GbE/gcu.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/GbE/iegbe.ko
-  AUTOLOAD:=$(call AutoLoad,40,gcu iegbe)
-endef
-
-define KernelPackage/ep80579-misc
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Other modules
-  TITLE:=Misc. Intel EP80579 drivers (DMA,, gpio)
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/EDMA/dma.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/GPIO/gpio.ko
-  AUTOLOAD:=$(call AutoLoad,40,gpio dma)
-endef
-
-define KernelPackage/ep80579-can
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Other modules
-  TITLE:=Intel EP80579 CAN driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/1588/timesync.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/CAN/can.ko
-  AUTOLOAD:=$(call AutoLoad,40,timesync can)
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	tar xzvf $(DL_DIR)/$(PKG_SOURCE) -C $(PKG_BUILD_DIR)/
-	$(Build/Patch)
-endef
-
-define Build/Compile/Subdir
-	$(MAKE) -C "$(LINUX_DIR)" \
-		KSRC="$(LINUX_DIR)" \
-		KOBJ="$(LINUX_DIR)" \
-		ENV_DIR=$(PKG_BUILD_DIR)/Embedded \
-		SUBDIRS="$(PKG_BUILD_DIR)/Embedded/src/$(1)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCHIVER="$(TARGET_CROSS)ar" \
-		COMPILER="$(TARGET_CC)" \
-		LINKER="$(TARGET_CROSS)ld" \
-		ARCH="$(LINUX_KARCH)"
-endef
-
-define Build/Compile
-	$(call Build/Compile/Subdir,GbE)
-	$(call Build/Compile/Subdir,CAN)
-	$(call Build/Compile/Subdir,EDMA)
-	$(call Build/Compile/Subdir,GPIO)
-	$(call Build/Compile/Subdir,WDT)
-	$(call Build/Compile/Subdir,1588)
-endef
-
-define KernelPackage/ep80579-eth/install
-endef
-
-$(eval $(call KernelPackage,ep80579-can))
-$(eval $(call KernelPackage,ep80579-eth))
-$(eval $(call KernelPackage,ep80579-misc))
-
diff --git a/package/kernel/ep80579-drivers/patches/001-igbe_update.patch b/package/kernel/ep80579-drivers/patches/001-igbe_update.patch
deleted file mode 100644
index d78d1a9..0000000
--- a/package/kernel/ep80579-drivers/patches/001-igbe_update.patch
+++ /dev/null
@@ -1,11755 +0,0 @@
---- a/Embedded/src/GbE/gcu.h
-+++ b/Embedded/src/GbE/gcu.h
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
-   
---- a/Embedded/src/GbE/gcu_if.c
-+++ b/Embedded/src/GbE/gcu_if.c
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
-   
-@@ -330,10 +330,17 @@ gcu_write_verify(uint32_t phy_num, uint3
-  */
- void gcu_iegbe_resume(struct pci_dev *pdev)
- {
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+      ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
-+
-     GCU_DBG("%s\n", __func__);
- 
-     pci_restore_state(pdev);
--    pci_enable_device(pdev);
-+    if(!pci_enable_device(pdev))
-+        GCU_DBG("pci_enable_device failed!\n",);
- 
-     return;
- }
-@@ -348,6 +355,12 @@ EXPORT_SYMBOL(gcu_iegbe_resume);
-  */
- int gcu_iegbe_suspend(struct pci_dev *pdev, uint32_t state)
- {
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+      ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
-+
-     GCU_DBG("%s\n", __func__);
- 
-     pci_save_state(pdev);
---- a/Embedded/src/GbE/gcu_if.h
-+++ b/Embedded/src/GbE/gcu_if.h
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-  
-   Contact Information:
-   
---- a/Embedded/src/GbE/gcu_main.c
-+++ b/Embedded/src/GbE/gcu_main.c
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
-@@ -94,6 +94,7 @@ static struct pci_driver gcu_driver = {
- 
- static struct gcu_adapter *global_adapter = 0;
- static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
-+static unsigned long g_intflags = 0;
- 
- MODULE_AUTHOR("Intel(R) Corporation");
- MODULE_DESCRIPTION("Global Configuration Unit Driver");
-@@ -124,7 +125,7 @@ gcu_init_module(void)
- 
-     printk(KERN_INFO "%s\n", gcu_copyright);
- 
--    ret = pci_module_init(&gcu_driver);
-+    ret = pci_register_driver(&gcu_driver);
-     if(ret >= 0) {
-         register_reboot_notifier(&gcu_notifier_reboot);
-     }
-@@ -199,8 +200,6 @@ gcu_probe(struct pci_dev *pdev,
-         return -ENOMEM;
-     }
- 
--    SET_MODULE_OWNER(adapter);
--
-     pci_set_drvdata(pdev, adapter);
- 
-     adapter->pdev = pdev;
-@@ -238,7 +237,6 @@ gcu_probe(struct pci_dev *pdev,
-     return 0;
- }
- 
--
- /**
-  * gcu_probe_err - gcu_probe error handler
-  * @err: gcu_err_type
-@@ -295,7 +293,7 @@ gcu_notify_reboot(struct notifier_block
-     case SYS_DOWN:
-     case SYS_HALT:
-     case SYS_POWER_OFF:
--        while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-+        while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-             if(pci_dev_driver(pdev) == &gcu_driver){
-                 gcu_suspend(pdev, 0x3);
-             }
-@@ -318,6 +316,11 @@ static int
- gcu_suspend(struct pci_dev *pdev, uint32_t state)
- {
-     /*struct gcu_adapter *adapter = pci_get_drvdata(pdev); */
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+      ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
- 
-     GCU_DBG("%s\n", __func__);
- 
-@@ -338,7 +341,6 @@ gcu_suspend(struct pci_dev *pdev, uint32
-     return state;
- }
- 
--
- /**
-  * alloc_gcu_adapter
-  *
-@@ -412,7 +414,7 @@ gcu_get_adapter(void)
-         return NULL;
-     }
- 
--    spin_lock(&global_adapter_spinlock);
-+    spin_lock_irqsave(&global_adapter_spinlock, g_intflags);
- 
-     return global_adapter;
- }
-@@ -437,7 +439,7 @@ gcu_release_adapter(const struct gcu_ada
-         *adapter = 0;
-     }
- 
--    spin_unlock(&global_adapter_spinlock);
-+    spin_unlock_irqrestore(&global_adapter_spinlock, g_intflags);
- 
-     return;
- }
---- a/Embedded/src/GbE/gcu_reg.h
-+++ b/Embedded/src/GbE/gcu_reg.h
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-   
-   Contact Information:
-   
---- a/Embedded/src/GbE/iegbe.7
-+++ b/Embedded/src/GbE/iegbe.7
-@@ -1,7 +1,7 @@
- 
- .\" GPL LICENSE SUMMARY
- .\" 
--.\"   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+.\"   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- .\" 
- .\"   This program is free software; you can redistribute it and/or modify 
- .\"   it under the terms of version 2 of the GNU General Public License as
-@@ -21,7 +21,7 @@
- .\"   Contact Information:
- .\"   Intel Corporation
- .\" 
--.\"  version: Embedded.L.1.0.34
-+.\"  version: Embedded.Release.Patch.L.1.0.7-5
- 
- .\" LICENSE
- .\"
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -2,7 +2,7 @@
-  
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
-   
-@@ -132,22 +132,6 @@ static const struct iegbe_stats iegbe_gs
-     { "cpp_master", E1000_STAT(icr_cpp_master) },
-     { "stat", E1000_STAT(icr_stat) },
- #endif
--#ifdef IEGBE_GBE_WORKAROUND
--            { "txqec", E1000_STAT(stats.txqec) },
--            { "tx_next_to_clean", E1000_STAT(stats.tx_next_to_clean) },
--            { "tx_next_to_use", E1000_STAT(stats.tx_next_to_use) },
--            { "num_tx_queues", E1000_STAT(stats.num_tx_queues) },
--
--            { "num_rx_buf_alloc", E1000_STAT(stats.num_rx_buf_alloc) },
--            { "rx_next_to_clean", E1000_STAT(stats.rx_next_to_clean) },
--            { "rx_next_to_use", E1000_STAT(stats.rx_next_to_use) },
--            { "cc_gt_num_rx", E1000_STAT(stats.cc_gt_num_rx) },
--            { "tx_hnet", E1000_STAT(stats.tx_hnet) },
--            { "tx_hnentu", E1000_STAT(stats.tx_hnentu) },
--            { "RUC", E1000_STAT(stats.ruc) },
--            { "RFC", E1000_STAT(stats.rfc) },
--
--#endif
- };
- #define E1000_STATS_LEN    \
-     sizeof(iegbe_gstrings_stats) / sizeof(struct iegbe_stats)
-@@ -158,7 +142,7 @@ static const char iegbe_gstrings_test[][
-     "Interrupt test (offline)", "Loopback test  (offline)",
-     "Link test   (on/offline)"
- };
--#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / (ETH_GSTRING_LEN))
-+#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / ETH_GSTRING_LEN)
- #endif /* ETHTOOL_TEST */
- 
- #define E1000_REGS_LEN 0x20
-@@ -176,9 +160,7 @@ iegbe_get_settings(struct net_device *ne
-                            SUPPORTED_10baseT_Full |
-                            SUPPORTED_100baseT_Half |
-                            SUPPORTED_100baseT_Full |
--#ifndef IEGBE_10_100_ONLY
-                            SUPPORTED_1000baseT_Full|
--#endif
-                            SUPPORTED_Autoneg |
-                            SUPPORTED_TP);
- 
-@@ -259,21 +241,13 @@ iegbe_set_settings(struct net_device *ne
-                           ADVERTISED_10baseT_Full |
-                           ADVERTISED_100baseT_Half |
-                           ADVERTISED_100baseT_Full |
--#ifndef IEGBE_10_100_ONLY
-                           ADVERTISED_1000baseT_Full|
--#endif
--
-                           ADVERTISED_Autoneg |
-                           ADVERTISED_TP;
-                           ecmd->advertising = hw->autoneg_advertised;
-           }
--    } else {
--		uint16_t duplex;
--
--		// ethtool uses DUPLEX_FULL/DUPLEX_HALF
--		// the driver needs FULL_DUPLEX/HALF_DUPLEX
--		duplex = (ecmd->duplex == DUPLEX_FULL) ? FULL_DUPLEX : HALF_DUPLEX;
--        if(iegbe_set_spd_dplx(adapter, ecmd->speed + duplex))
-+    } else
-+        if(iegbe_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)){
-             return -EINVAL;
-     }
-     /* reset the link */
-@@ -728,8 +702,8 @@ iegbe_set_ringparam(struct net_device *n
-     struct iegbe_rx_ring *rxdr, *rx_old, *rx_new;
-     int i, err, tx_ring_size, rx_ring_size;
- 
--    tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
--    rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
-+    tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_tx_queues;
-+    rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_rx_queues;
- 
-     if (netif_running(adapter->netdev)){
-         iegbe_down(adapter);
-@@ -768,10 +742,10 @@ iegbe_set_ringparam(struct net_device *n
-         E1000_MAX_TXD : E1000_MAX_82544_TXD));
-     E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); 
- 
--    for (i = 0; i < adapter->num_queues; i++) {
--        txdr[i].count = txdr->count;
--        rxdr[i].count = rxdr->count;
--    }
-+	for (i = 0; i < adapter->num_tx_queues; i++)
-+		txdr[i].count = txdr->count;
-+	for (i = 0; i < adapter->num_rx_queues; i++)
-+		rxdr[i].count = rxdr->count;
- 
-     if(netif_running(adapter->netdev)) {
-         /* Try to get new resources before deleting old */
-@@ -950,8 +924,7 @@ iegbe_eeprom_test(struct iegbe_adapter *
- 
- static irqreturn_t
- iegbe_test_intr(int irq,
--        void *data,
--        struct pt_regs *regs)
-+        void *data)
- {
-     struct net_device *netdev = (struct net_device *) data;
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-@@ -973,7 +946,7 @@ iegbe_intr_test(struct iegbe_adapter *ad
-     /* Hook up test interrupt handler just for this test */
-      if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
-          shared_int = FALSE;
--     } else if(request_irq(irq, &iegbe_test_intr, SA_SHIRQ,
-+     } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
-                   netdev->name, netdev)){
-         *data = 1;
-         return -1;
-@@ -1393,7 +1366,7 @@ iegbe_set_phy_loopback(struct iegbe_adap
-              * attempt this 10 times.
-              */
-             while(iegbe_nonintegrated_phy_loopback(adapter) &&
--                  count++ < 0xa) { };
-+                  count++ < 0xa);
-             if(count < 0xb) {
-                 return 0;
-             }                     
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -1,7 +1,7 @@
- /******************************************************************************* 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -21,7 +21,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
-@@ -127,9 +127,12 @@ struct iegbe_adapter;
- #define E1000_MIN_RXD                       80
- #define E1000_MAX_82544_RXD               4096
- 
-+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
- /* Supported Rx Buffer Sizes */
- #define E1000_RXBUFFER_128   128    /* Used for packet split */
- #define E1000_RXBUFFER_256   256    /* Used for packet split */
-+#define E1000_RXBUFFER_512   512
-+#define E1000_RXBUFFER_1024  1024
- #define E1000_RXBUFFER_2048  2048
- #define E1000_RXBUFFER_4096  4096
- #define E1000_RXBUFFER_8192  8192
-@@ -164,11 +167,9 @@ struct iegbe_adapter;
- #define E1000_MASTER_SLAVE	iegbe_ms_hw_default
- #endif
- 
--#ifdef NETIF_F_HW_VLAN_TX
--#define E1000_MNG_VLAN_NONE -1
--#endif
-+#define E1000_MNG_VLAN_NONE (-1)
- /* Number of packet split data buffers (not including the header buffer) */
--#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
-+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
- 
- /* only works for sizes that are powers of 2 */
- #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
-@@ -206,6 +207,7 @@ struct iegbe_tx_ring {
- 	spinlock_t tx_lock;
- 	uint16_t tdh;
- 	uint16_t tdt;
-+	boolean_t last_tx_tso;
- 	uint64_t pkt;
- };
- 
-@@ -228,6 +230,9 @@ struct iegbe_rx_ring {
- 	struct iegbe_ps_page *ps_page;
- 	struct iegbe_ps_page_dma *ps_page_dma;
- 
-+	/* cpu for rx queue */
-+	int cpu;
-+
- 	uint16_t rdh;
- 	uint16_t rdt;
- 	uint64_t pkt;
-@@ -252,10 +257,8 @@ struct iegbe_adapter {
- 	struct timer_list tx_fifo_stall_timer;
- 	struct timer_list watchdog_timer;
- 	struct timer_list phy_info_timer;
--#ifdef NETIF_F_HW_VLAN_TX
- 	struct vlan_group *vlgrp;
-     	uint16_t mng_vlan_id;
--#endif
- 	uint32_t bd_number;
- 	uint32_t rx_buffer_len;
- 	uint32_t part_num;
-@@ -265,8 +268,18 @@ struct iegbe_adapter {
- 	uint16_t link_speed;
- 	uint16_t link_duplex;
- 	spinlock_t stats_lock;
--	atomic_t irq_sem;
--	struct work_struct tx_timeout_task;
-+	spinlock_t tx_queue_lock;
-+	unsigned int total_tx_bytes;
-+	unsigned int total_tx_packets;
-+	unsigned int total_rx_bytes;
-+	unsigned int total_rx_packets;
-+	/* Interrupt Throttle Rate */
-+	uint32_t itr;
-+	uint32_t itr_setting;
-+	uint16_t tx_itr;
-+	uint16_t rx_itr;
-+
-+	struct work_struct reset_task;
- 	uint8_t fc_autoneg;
- 
- #ifdef ETHTOOL_PHYS_ID
-@@ -276,9 +289,8 @@ struct iegbe_adapter {
- 
- 	/* TX */
- 	struct iegbe_tx_ring *tx_ring;      /* One per active queue */
--#ifdef CONFIG_E1000_MQ
--	struct iegbe_tx_ring **cpu_tx_ring; /* per-cpu */
--#endif
-+	unsigned int restart_queue;
-+	unsigned long tx_queue_len;
- 	uint32_t txd_cmd;
- 	uint32_t tx_int_delay;
- 	uint32_t tx_abs_int_delay;
-@@ -286,46 +298,33 @@ struct iegbe_adapter {
- 	uint64_t gotcl_old;
- 	uint64_t tpt_old;
- 	uint64_t colc_old;
-+	uint32_t tx_timeout_count;
- 	uint32_t tx_fifo_head;
- 	uint32_t tx_head_addr;
- 	uint32_t tx_fifo_size;
-+	uint8_t  tx_timeout_factor;
- 	atomic_t tx_fifo_stall;
- 	boolean_t pcix_82544;
- 	boolean_t detect_tx_hung;
- 
- 	/* RX */
--#ifdef CONFIG_E1000_NAPI
--	boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
-+	bool (*clean_rx)(struct iegbe_adapter *adapter,
- 			       struct iegbe_rx_ring *rx_ring,
- 			       int *work_done, int work_to_do);
--#else
--	boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
--			       struct iegbe_rx_ring *rx_ring);
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
- 	void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
--                          struct iegbe_rx_ring *rx_ring,
--                          int cleaned_count);
--#else
--	void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
--			      struct iegbe_rx_ring *rx_ring);
--#endif
--
-+			      struct iegbe_rx_ring *rx_ring,
-+				int cleaned_count);
- 	struct iegbe_rx_ring *rx_ring;      /* One per active queue */
--#ifdef CONFIG_E1000_NAPI
-+	struct napi_struct napi;
- 	struct net_device *polling_netdev;  /* One per active queue */
--#endif
--#ifdef CONFIG_E1000_MQ
--	struct net_device **cpu_netdev;     /* per-cpu */
--	struct call_async_data_struct rx_sched_call_data;
--	int cpu_for_queue[4];
--#endif
--	int num_queues;
-+
-+	int num_tx_queues;
-+	int num_rx_queues;
- 
- 	uint64_t hw_csum_err;
- 	uint64_t hw_csum_good;
- 	uint64_t rx_hdr_split;
-+	uint32_t alloc_rx_buff_failed;
- 	uint32_t rx_int_delay;
- 	uint32_t rx_abs_int_delay;
- 	boolean_t rx_csum;
-@@ -334,8 +333,6 @@ struct iegbe_adapter {
- 	uint64_t gorcl_old;
- 	uint16_t rx_ps_bsize0;
- 
--	/* Interrupt Throttle Rate */
--	uint32_t itr;
- 
- 	/* OS defined structs */
- 	struct net_device *netdev;
-@@ -378,7 +375,21 @@ struct iegbe_adapter {
- #ifdef CONFIG_PCI_MSI
- 	boolean_t have_msi;
- #endif
--#define IEGBE_INTD_DISABLE  0x0400 
-+	/* to not mess up cache alignment, always add to the bottom */
-+	boolean_t tso_force;
-+	boolean_t smart_power_down;	/* phy smart power down */
-+	boolean_t quad_port_a;
-+	unsigned long flags;
-+	uint32_t eeprom_wol;
-+	int bars;
-+	int need_ioport;
- };
-+
-+enum iegbe_state_t {
-+	__E1000_TESTING,
-+	__E1000_RESETTING,
-+	__E1000_DOWN
-+};
-+#define IEGBE_INTD_DISABLE  0x0400 
- #endif /* _IEGBE_H_ */
- 
---- a/Embedded/src/GbE/iegbe_hw.c
-+++ b/Embedded/src/GbE/iegbe_hw.c
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
-@@ -2115,7 +2115,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
- 
-         ret_val = iegbe_oem_set_trans_gasket(hw);
-         if(ret_val){
--            return ret_val;
-+            return ret_val; 
-         }
-         ret_val = iegbe_oem_phy_is_full_duplex(
-             hw, (int *) &is_FullDuplex);
-@@ -2164,7 +2164,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
-     }
-     /* Write the configured values back to the Device Control Reg. */
-     E1000_WRITE_REG(hw, CTRL, ctrl);
--    return E1000_SUCCESS;
-+    return ret_val; 
- }
- 
- /*****************************************************************************
-@@ -2684,7 +2684,7 @@ iegbe_check_for_link(struct iegbe_hw *hw
- 
-             if(hw->autoneg_failed == 0) {
-                 hw->autoneg_failed = 1;
--                return 0;
-+                return E1000_SUCCESS; 
-             }
-             DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
- 
-@@ -5875,7 +5875,7 @@ iegbe_get_cable_length(struct iegbe_hw *
-                         max_agc = cur_agc;
-                 }
-             }
--
-+		
-             /* This is to fix a Klockwork defect, that the array index might
-              * be out of bounds.  113 is table size */
-             if (cur_agc < 0x71){
---- a/Embedded/src/GbE/iegbe_hw.h
-+++ b/Embedded/src/GbE/iegbe_hw.h
-@@ -2,7 +2,7 @@
-  
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
-  
-@@ -299,7 +299,7 @@ void iegbe_set_media_type(struct iegbe_h
- /* Link Configuration */
- int32_t iegbe_setup_link(struct iegbe_hw *hw);
- int32_t iegbe_phy_setup_autoneg(struct iegbe_hw *hw);
--void iegbe_config_collision_dist(struct iegbe_hw *hw);
-+void    iegbe_config_collision_dist(struct iegbe_hw *hw);
- int32_t iegbe_config_fc_after_link_up(struct iegbe_hw *hw);
- int32_t iegbe_check_for_link(struct iegbe_hw *hw);
- int32_t iegbe_get_speed_and_duplex(struct iegbe_hw *hw, uint16_t * speed, uint16_t * duplex);
-@@ -588,14 +588,6 @@ uint8_t iegbe_arc_subsystem_valid(struct
-  *   o LSC    = Link Status Change
-  */
- 
--#ifdef IEGBE_GBE_WORKAROUND
--#define IMS_ENABLE_MASK ( \
--    E1000_IMS_RXT0   |    \
--    E1000_IMS_TXQE   |    \
--    E1000_IMS_RXDMT0 |    \
--    E1000_IMS_RXSEQ  |    \
--    E1000_IMS_LSC)
--#else
- #define IMS_ENABLE_MASK ( \
-     E1000_IMS_RXT0   |    \
-     E1000_IMS_TXDW   |    \
-@@ -606,8 +598,7 @@ uint8_t iegbe_arc_subsystem_valid(struct
-     E1000_ICR_PB               |  \
-     E1000_ICR_CPP_TARGET       |  \
-     E1000_ICR_CPP_MASTER       |  \
--    E1000_IMS_LSC)
--#endif 
-+    E1000_ICR_LSC) 
- 
- /* Number of high/low register pairs in the RAR. The RAR (Receive Address
-  * Registers) holds the directed and multicast addresses that we monitor. We
-@@ -923,10 +914,15 @@ struct iegbe_ffvt_entry {
- #define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
- #define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
- #define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
--// Register conflict, does not exist for ICP_xxxx hardware 
--// #define E1000_IAM      0x000E0  /* Interrupt Acknowledge Auto Mask */
- #define E1000_CTRL_AUX 0x000E0  /* Aux Control -RW */
-+#define E1000_IAM      0x000E0  /* Interrupt Acknowledge Auto Mask */
- #define E1000_RCTL     0x00100  /* RX Control - RW */
-+#define E1000_RDTR1    0x02820  /* RX Delay Timer (1) - RW */
-+#define E1000_RDBAL1   0x02900  /* RX Descriptor Base Address Low (1) - RW */
-+#define E1000_RDBAH1   0x02904  /* RX Descriptor Base Address High (1) - RW */
-+#define E1000_RDLEN1   0x02908  /* RX Descriptor Length (1) - RW */
-+#define E1000_RDH1     0x02910  /* RX Descriptor Head (1) - RW */
-+#define E1000_RDT1     0x02918  /* RX Descriptor Tail (1) - RW */
- #define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
- #define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
- #define E1000_RXCW     0x00180  /* RX Configuration Word - RO */
-@@ -1282,8 +1278,6 @@ struct iegbe_ffvt_entry {
- #define E1000_82542_FFMT     E1000_FFMT
- #define E1000_82542_FFVT     E1000_FFVT
- #define E1000_82542_HOST_IF  E1000_HOST_IF
--// Register conflict with ICP_xxxx hardware, no IAM
--// #define E1000_82542_IAM         E1000_IAM
- #define E1000_82542_EEMNGCTL    E1000_EEMNGCTL
- #define E1000_82542_PSRCTL      E1000_PSRCTL
- #define E1000_82542_RAID        E1000_RAID
-@@ -1329,6 +1323,7 @@ struct iegbe_hw_stats {
-     uint64_t algnerrc;
-     uint64_t symerrs;
-     uint64_t rxerrc;
-+	uint64_t		txerrc;
-     uint64_t mpc;
-     uint64_t scc;
-     uint64_t ecol;
-@@ -1363,6 +1358,7 @@ struct iegbe_hw_stats {
-     uint64_t ruc;
-     uint64_t rfc;
-     uint64_t roc;
-+	uint64_t		rlerrc;
-     uint64_t rjc;
-     uint64_t mgprc;
-     uint64_t mgpdc;
-@@ -1392,19 +1388,6 @@ struct iegbe_hw_stats {
-     uint64_t ictxqmtc;
-     uint64_t icrxdmtc;
-     uint64_t icrxoc;
--#ifdef IEGBE_GBE_WORKAROUND
--    u64 txqec;
--    u64 tx_next_to_clean;
--    u64 tx_next_to_use;
--    u64 cc_gt_num_rx;
--    u64 tx_hnet;
--    u64 tx_hnentu;
--    u64 num_tx_queues;
--
--    u64 num_rx_buf_alloc;
--    u64 rx_next_to_clean;
--    u64 rx_next_to_use;
--#endif
- };
- 
- /* Structure containing variables used by the shared code (iegbe_hw.c) */
-@@ -1484,6 +1467,7 @@ struct iegbe_hw {
-     boolean_t ifs_params_forced;
-     boolean_t in_ifs_mode;
-     boolean_t mng_reg_access_disabled;
-+    boolean_t rx_needs_kicking;
-     boolean_t icp_xxxx_is_link_up;
- };
- 
-@@ -2358,17 +2342,23 @@ struct iegbe_host_command_info {
- #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH    0x000000FF
- #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH   0x0000FF00
- #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH   0x00FF0000
-+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE  0x00000001
-+#define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
- 
- /* PBA constants */
-+#define E1000_PBA_8K 0x0008    /* 8KB, default Rx allocation */
- #define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
- #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
-+#define E1000_PBA_20K 0x0014
- #define E1000_PBA_22K 0x0016
- #define E1000_PBA_24K 0x0018
- #define E1000_PBA_30K 0x001E
- #define E1000_PBA_32K 0x0020
-+#define E1000_PBA_34K 0x0022
- #define E1000_PBA_38K 0x0026
- #define E1000_PBA_40K 0x0028
- #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
-+#define E1000_PBS_16K E1000_PBA_16K
- 
- /* Flow Control Constants */
- #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
-@@ -2899,7 +2889,7 @@ struct iegbe_host_command_info {
- #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
- #define M88E1011_I_REV_4   0x04
- #define M88E1111_I_PHY_ID  0x01410CC2
--#define M88E1141_E_PHY_ID  0x01410CD4
-+#define M88E1141_E_PHY_ID  0x01410CD0
- #define L1LXT971A_PHY_ID   0x001378E0
- 
- /* Miscellaneous PHY bit definitions. */
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
-@@ -42,103 +42,15 @@ GPL LICENSE SUMMARY
- 
- #include "iegbe.h"
- #include "gcu_if.h"
--
--/* Change Log
-- * 6.0.58       4/20/05
-- *   o iegbe_set_spd_dplx tests for compatible speed/duplex specification
-- *     for fiber adapters
-- * 6.0.57	4/19/05
-- *   o Added code to fix register test failure for devices >= 82571
-- *
-- * 6.0.52	3/15/05
-- *   o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- *     calls, one from mii_ioctl and other from within update_stats while
-- *     processing MIIREG ioctl.
-- *
-- * 6.1.2	4/13/05
-- *   o Fixed ethtool diagnostics
-- *   o Enabled flow control to take default eeprom settings
-- *   o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- *     calls, one from mii_ioctl and other from within update_stats while processing
-- *     MIIREG ioctl.
-- * 6.0.55       3/23/05
-- *   o Support for MODULE_VERSION
-- *   o Fix APM setting for 82544 based adapters
-- * 6.0.54	3/26/05
-- *   o Added a timer to expire packets that were deferred for cleanup
-- * 6.0.52	3/15/05
-- *   o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- *     calls, one from mii_ioctl and other from within update_stats while
-- *     processing MIIREG ioctl.
-- * 6.0.47	3/2/05
-- *   o Added enhanced functionality to the loopback diags to wrap the
-- *     descriptor rings
-- *   o Added manageability vlan filtering workaround.
-- *
-- * 6.0.44+	2/15/05
-- *   o Added code to handle raw packet based DHCP packets
-- *   o Added code to fix the errata 10 buffer overflow issue
-- *   o Sync up with WR01-05
-- *     o applied Anton's patch to resolve tx hang in hardware
-- *     o iegbe timeouts with early writeback patch
-- *   o Removed Queensport IDs
-- *   o fixed driver panic if MAC receives a bad large packets when packet
-- *     split is enabled
-- *   o Applied Andrew Mortons patch - iegbe stops working after resume
-- * 5.2.29       12/24/03
-- *   o Bug fix: Endianess issue causing ethtool diags to fail on ppc.
-- *   o Bug fix: Use pdev->irq instead of netdev->irq for MSI support.
-- *   o Report driver message on user override of InterruptThrottleRate module
-- *     parameter.
-- *   o Bug fix: Change I/O address storage from uint32_t to unsigned long.
-- *   o Feature: Added ethtool RINGPARAM support.
-- *   o Feature: Added netpoll support.
-- *   o Bug fix: Race between Tx queue and Tx clean fixed with a spin lock.
-- *   o Bug fix: Allow 1000/Full setting for autoneg param for fiber connections.
-- *              Jon D Mason [jonmason at us.ibm.com].
-- *
-- * 5.2.22	10/15/03
-- *   o Bug fix: SERDES devices might be connected to a back-plane switch that
-- *     doesn't support auto-neg, so add the capability to force 1000/Full.
-- *     Also, since forcing 1000/Full, sample RxSynchronize bit to detect link
-- *     state.
-- *   o Bug fix: Flow control settings for hi/lo watermark didn't consider
-- *     changes in the RX FIFO size, which could occur with Jumbo Frames or with
-- *     the reduced FIFO in 82547.
-- *   o Bug fix: Better propagation of error codes.
-- *     [Janice Girouard (janiceg -a-t- us.ibm.com)]
-- *   o Bug fix: hang under heavy Tx stress when running out of Tx descriptors;
-- *     wasn't clearing context descriptor when backing out of send because of
-- *     no-resource condition.
-- *   o Bug fix: check netif_running in dev->poll so we don't have to hang in
-- *     dev->close until all polls are finished.  [Rober Olsson
-- *     (robert.olsson at data.slu.se)].
-- *   o Revert TxDescriptor ring size back to 256 since change to 1024 wasn't
-- *     accepted into the kernel.
-- *
-- * 5.2.16	8/8/03
-- */
--
--#ifdef IEGBE_GBE_WORKAROUND
--#define IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS 1
--#endif
-+#include <linux/ipv6.h>
-+#include <net/ip6_checksum.h>
- 
- char iegbe_driver_name[] = "iegbe";
- char iegbe_driver_string[] = "Gigabit Ethernet Controller Driver";
--#ifndef CONFIG_E1000_NAPI
--#define DRIVERNAPI
--#else
--#define DRIVERNAPI "-NAPI"
--#endif
--#define DRV_VERSION "0.8.0"DRIVERNAPI
-+#define DRV_VERSION "1.0.0-K28-NAPI"
- char iegbe_driver_version[] = DRV_VERSION;
--char iegbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
-+char iegbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
- 
--#define E1000_FIFO_HDR            0x10
--#define E1000_82547_PAD_LEN        0x3E0
--#define MINIMUM_DHCP_PACKET_SIZE 282
--#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
--#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
- 
- /* iegbe_pci_tbl - PCI Device ID Table
-  *
-@@ -148,95 +60,48 @@ char iegbe_copyright[] = "Copyright (c)
-  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
-  */
- static struct pci_device_id iegbe_pci_tbl[] = {
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1000), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1001), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1004), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1008), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1009), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x100C), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x100D), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x100E), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x100F), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1010), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1011), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1012), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1013), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1014), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1015), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1016), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1017), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1018), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1019), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x101A), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x101D), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x101E), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1026), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1027), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1028), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x105E), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x105F), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1060), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1075), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1076), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1077), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1078), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x1079), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107A), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107B), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107C), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107D), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107E), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x107F), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x108A), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x108B), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x108C), */
--/* 	INTEL_E1000_ETHERNET_DEVICE(0x109A), */
--	INTEL_E1000_ETHERNET_DEVICE(0x5040),
--	INTEL_E1000_ETHERNET_DEVICE(0x5041),
--	INTEL_E1000_ETHERNET_DEVICE(0x5042),
--	INTEL_E1000_ETHERNET_DEVICE(0x5043),
--  	INTEL_E1000_ETHERNET_DEVICE(0x5044),
--	INTEL_E1000_ETHERNET_DEVICE(0x5045),
--	INTEL_E1000_ETHERNET_DEVICE(0x5046),
--	INTEL_E1000_ETHERNET_DEVICE(0x5047),
--  	INTEL_E1000_ETHERNET_DEVICE(0x5048),
--	INTEL_E1000_ETHERNET_DEVICE(0x5049),
--	INTEL_E1000_ETHERNET_DEVICE(0x504A),
--	INTEL_E1000_ETHERNET_DEVICE(0x504B),
--	/* required last entry */
-+    INTEL_E1000_ETHERNET_DEVICE(0x5040),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5041),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5042),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5043),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5044),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5045),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5046),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5047),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5048),
-+    INTEL_E1000_ETHERNET_DEVICE(0x5049),
-+    INTEL_E1000_ETHERNET_DEVICE(0x504A),
-+    INTEL_E1000_ETHERNET_DEVICE(0x504B),
-+    /* required last entry */
- 	{0,}
- };
- 
- MODULE_DEVICE_TABLE(pci, iegbe_pci_tbl);
- 
--DEFINE_SPINLOCK(print_lock);
- 
- int iegbe_up(struct iegbe_adapter *adapter);
- void iegbe_down(struct iegbe_adapter *adapter);
-+void iegbe_reinit_locked(struct iegbe_adapter *adapter);
- void iegbe_reset(struct iegbe_adapter *adapter);
- int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx);
- int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter);
- int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter);
- void iegbe_free_all_tx_resources(struct iegbe_adapter *adapter);
- void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter);
--int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-                              struct iegbe_tx_ring *txdr);
--int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-                              struct iegbe_rx_ring *rxdr);
--void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-                              struct iegbe_tx_ring *tx_ring);
--void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-                              struct iegbe_rx_ring *rx_ring);
- void iegbe_update_stats(struct iegbe_adapter *adapter);
--
- static int iegbe_init_module(void);
- static void iegbe_exit_module(void);
- static int iegbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
- static void __devexit iegbe_remove(struct pci_dev *pdev);
- static int iegbe_alloc_queues(struct iegbe_adapter *adapter);
--#ifdef CONFIG_E1000_MQ
--static void iegbe_setup_queue_mapping(struct iegbe_adapter *adapter);
--#endif
- static int iegbe_sw_init(struct iegbe_adapter *adapter);
- static int iegbe_open(struct net_device *netdev);
- static int iegbe_close(struct net_device *netdev);
-@@ -249,7 +114,8 @@ static void iegbe_clean_tx_ring(struct i
-                                 struct iegbe_tx_ring *tx_ring);
- static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
-                                 struct iegbe_rx_ring *rx_ring);
--static void iegbe_set_multi(struct net_device *netdev);
-+
-+static void iegbe_set_rx_mode(struct net_device *netdev);
- static void iegbe_update_phy_info(unsigned long data);
- static void iegbe_watchdog(unsigned long data);
- static void iegbe_82547_tx_fifo_stall(unsigned long data);
-@@ -257,66 +123,46 @@ static int iegbe_xmit_frame(struct sk_bu
- static struct net_device_stats * iegbe_get_stats(struct net_device *netdev);
- static int iegbe_change_mtu(struct net_device *netdev, int new_mtu);
- static int iegbe_set_mac(struct net_device *netdev, void *p);
--static irqreturn_t iegbe_intr(int irq, void *data, struct pt_regs *regs);
-+static irqreturn_t iegbe_intr(int irq, void *data);
- 
--void iegbe_tasklet(unsigned long);
-+static irqreturn_t iegbe_intr_msi(int irq, void *data);
- 
--#ifndef IEGBE_GBE_WORKAROUND
--static boolean_t iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-                                     struct iegbe_tx_ring *tx_ring);
--#endif
--
--#ifdef CONFIG_E1000_NAPI
--static int iegbe_clean(struct net_device *poll_dev, int *budget);
--static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-+static int iegbe_clean(struct napi_struct *napi, int budget);
-+static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-                                     struct iegbe_rx_ring *rx_ring,
-                                     int *work_done, int work_to_do);
--static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-                                        struct iegbe_rx_ring *rx_ring,
-                                        int *work_done, int work_to_do);
--#else
--static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
--                                    struct iegbe_rx_ring *rx_ring);
--static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
--                                       struct iegbe_rx_ring *rx_ring);
--#endif
- 
--#ifdef IEGBE_GBE_WORKAROUND
-+
- static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-                                    struct iegbe_rx_ring *rx_ring,
-                                    int cleaned_count);
- static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-                                       struct iegbe_rx_ring *rx_ring,
-                                       int cleaned_count);
--#else
--static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
--                                   struct iegbe_rx_ring *rx_ring);
--static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
--                                      struct iegbe_rx_ring *rx_ring);
--#endif
-+
- 
- static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
--#ifdef SIOCGMIIPHY
- static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
--			   int cmd);
--#endif
-+               int cmd);
- void set_ethtool_ops(struct net_device *netdev);
- extern int ethtool_ioctl(struct ifreq *ifr);
- static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter);
- static void iegbe_leave_82542_rst(struct iegbe_adapter *adapter);
- static void iegbe_tx_timeout(struct net_device *dev);
--static void iegbe_tx_timeout_task(struct net_device *dev);
-+static void iegbe_reset_task(struct work_struct *work);
- static void iegbe_smartspeed(struct iegbe_adapter *adapter);
- static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
--					      struct sk_buff *skb);
-+                          struct sk_buff *skb);
- 
--#ifdef NETIF_F_HW_VLAN_TX
--static void iegbe_vlan_rx_register(struct net_device *netdev,
--                                   struct vlan_group *grp);
-+static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
- static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
--#endif
- 
- static int iegbe_notify_reboot(struct notifier_block *,
-                                unsigned long event,
-@@ -331,15 +177,17 @@ static int iegbe_resume(struct pci_dev *
- static void iegbe_netpoll (struct net_device *netdev);
- #endif
- 
--#ifdef CONFIG_E1000_MQ
--/* for multiple Rx queues */
-+#define COPYBREAK_DEFAULT 256
-+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
-+module_param(copybreak, uint, 0644);
-+MODULE_PARM_DESC(copybreak,
-+	"Maximum size of packet that is copied to a new buffer on receive");
- void iegbe_rx_schedule(void *data);
--#endif
- 
- struct notifier_block iegbe_notifier_reboot = {
--	.notifier_call	= iegbe_notify_reboot,
--	.next		= NULL,
--	.priority	= 0
-+    .notifier_call    = iegbe_notify_reboot,
-+    .next        = NULL,
-+    .priority    = 0
- };
- 
- /* Exported from other modules */
-@@ -347,14 +195,14 @@ struct notifier_block iegbe_notifier_reb
- extern void iegbe_check_options(struct iegbe_adapter *adapter);
- 
- static struct pci_driver iegbe_driver = {
--	.name     = iegbe_driver_name,
--	.id_table = iegbe_pci_tbl,
--	.probe    = iegbe_probe,
--	.remove   = __devexit_p(iegbe_remove),
--	/* Power Managment Hooks */
-+    .name     = iegbe_driver_name,
-+    .id_table = iegbe_pci_tbl,
-+    .probe    = iegbe_probe,
-+    .remove   = __devexit_p(iegbe_remove),
-+    /* Power Managment Hooks */
- #ifdef CONFIG_PM
--	.suspend  = iegbe_suspend,
--	.resume   = iegbe_resume
-+    .suspend  = iegbe_suspend,
-+    .resume   = iegbe_resume
- #endif
- };
- 
-@@ -364,46 +212,17 @@ MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_VERSION);
- 
- static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
--module_param(debug, int, 0);
-+module_param(debug, int, 0x0);
- MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
- 
--static uint8_t gcu_suspend = 0;
--static uint8_t gcu_resume = 0;
-+static uint8_t gcu_suspend = 0x0;
-+static uint8_t gcu_resume = 0x0;
- struct pci_dev *gcu = NULL;
- 
--unsigned long tasklet_data;
--DECLARE_TASKLET(iegbe_reset_tasklet, iegbe_tasklet, (unsigned long) &tasklet_data);
- 
- /**
-  * iegbe_iegbe_tasklet -*
-  **/
--void iegbe_tasklet(unsigned long data)
--{
--   char* err_msg = "TEST";
--	uint32_t *icr = (uint32_t*) data;
--	uint32_t gbe = *icr & 0x000000FF;
--	if( *icr & E1000_ICR_RX_DESC_FIFO_PAR) { /* 21 */
--		 err_msg = "DMA Transmit Descriptor 2-bit ECC Error!";
--	}
--	if( *icr & E1000_ICR_TX_DESC_FIFO_PAR) { /* 20 */
--		 err_msg = "DMA Receive Descriptor 2-bit ECC Error!";
--	}
--	if( *icr & E1000_ICR_PB) { /* 23 */
--		 err_msg = "DMA Packet Buffer 2-bit ECC Error!";
--	}
--	if( *icr & E1000_ICR_CPP_TARGET) { /* 27 */
--		 err_msg = "Statistic Register ECC Error!";
--	}
--	if( *icr & E1000_ICR_CPP_MASTER) {
--		 err_msg = "CPP Error!";
--	}
--	   spin_lock(&print_lock);
--		printk("IEGBE%d: System Reset due to: %s\n", gbe, err_msg);
--		dump_stack();
--	   spin_unlock(&print_lock);
--		panic(err_msg);
--	return;
--}
- /**
-  * iegbe_init_module - Driver Registration Routine
-  *
-@@ -411,21 +230,24 @@ void iegbe_tasklet(unsigned long data)
-  * loaded. All it does is register with the PCI subsystem.
-  **/
- 
--static int __init
--iegbe_init_module(void)
-+static int __init iegbe_init_module(void)
- {
--	int ret;
-+    int ret;
- 
-     printk(KERN_INFO "%s - version %s\n",
--	       iegbe_driver_string, iegbe_driver_version);
-+           iegbe_driver_string, iegbe_driver_version);
- 
--	printk(KERN_INFO "%s\n", iegbe_copyright);
-+    printk(KERN_INFO "%s\n", iegbe_copyright);
- 
--	ret = pci_module_init(&iegbe_driver);
--	if(ret >= 0) {
--		register_reboot_notifier(&iegbe_notifier_reboot);
--	}
--	return ret;
-+    ret = pci_register_driver(&iegbe_driver);
-+	if (copybreak != COPYBREAK_DEFAULT) {
-+		if (copybreak == 0)
-+			printk(KERN_INFO "iegbe: copybreak disabled\n");
-+		else
-+			printk(KERN_INFO "iegbe: copybreak enabled for "
-+			       "packets <= %u bytes\n", copybreak);
-+    }
-+    return ret;
- }
- 
- module_init(iegbe_init_module);
-@@ -437,29 +259,51 @@ module_init(iegbe_init_module);
-  * from memory.
-  **/
- 
--static void __exit
--iegbe_exit_module(void)
-+static void __exit iegbe_exit_module(void)
- {
--
--	unregister_reboot_notifier(&iegbe_notifier_reboot);
--	pci_unregister_driver(&iegbe_driver);
-+    pci_unregister_driver(&iegbe_driver);
- }
- 
- module_exit(iegbe_exit_module);
- 
-+static int iegbe_request_irq(struct iegbe_adapter *adapter)
-+{
-+	struct net_device *netdev = adapter->netdev;
-+	irq_handler_t handler = iegbe_intr;
-+	int irq_flags = IRQF_SHARED;
-+	int err;
-+	adapter->have_msi = !pci_enable_msi(adapter->pdev);
-+	if (adapter->have_msi) {
-+		handler = iegbe_intr_msi;
-+		irq_flags = 0;
-+	}
-+	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-+	                  netdev);
-+	if (err) {
-+		if (adapter->have_msi)
-+			pci_disable_msi(adapter->pdev);
-+		DPRINTK(PROBE, ERR,
-+		        "Unable to allocate interrupt Error: %d\n", err);
-+	}
-+	return err;
-+}
-+static void iegbe_free_irq(struct iegbe_adapter *adapter)
-+{
-+	struct net_device *netdev = adapter->netdev;
-+	free_irq(adapter->pdev->irq, netdev);
-+	if (adapter->have_msi)
-+		pci_disable_msi(adapter->pdev);
-+}
- /**
-  * iegbe_irq_disable - Mask off interrupt generation on the NIC
-  * @adapter: board private structure
-  **/
- 
--static inline void
--iegbe_irq_disable(struct iegbe_adapter *adapter)
-+static void iegbe_irq_disable(struct iegbe_adapter *adapter)
- {
--
--	atomic_inc(&adapter->irq_sem);
--	E1000_WRITE_REG(&adapter->hw, IMC, ~0);
--	E1000_WRITE_FLUSH(&adapter->hw);
--	synchronize_irq(adapter->pdev->irq);
-+    E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-+    E1000_WRITE_FLUSH(&adapter->hw);
-+    synchronize_irq(adapter->pdev->irq);
- }
- 
- /**
-@@ -470,244 +314,414 @@ iegbe_irq_disable(struct iegbe_adapter *
- static inline void
- iegbe_irq_enable(struct iegbe_adapter *adapter)
- {
--
--	if(likely(atomic_dec_and_test(&adapter->irq_sem))) {
--		E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
--		E1000_WRITE_FLUSH(&adapter->hw);
--	}
-+        E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
-+        E1000_WRITE_FLUSH(&adapter->hw);
- }
--#ifdef NETIF_F_HW_VLAN_TX
--void
--iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
--{
--	struct net_device *netdev = adapter->netdev;
--	uint16_t vid = adapter->hw.mng_cookie.vlan_id;
--	uint16_t old_vid = adapter->mng_vlan_id;
- 
--	if(adapter->vlgrp) {
--		if(!adapter->vlgrp->vlan_devices[vid]) {
--			if(adapter->hw.mng_cookie.status &
--				E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
--				iegbe_vlan_rx_add_vid(netdev, vid);
--				adapter->mng_vlan_id = vid;
--            } else {
--				adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
--            }
--			if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
--					(vid != old_vid) &&
--                    !adapter->vlgrp->vlan_devices[old_vid]) {
--				iegbe_vlan_rx_kill_vid(netdev, old_vid);
--		}
--	}
--}
-+static void iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
-+{
-+	struct iegbe_hw *hw = &adapter->hw;
-+        struct net_device *netdev = adapter->netdev;
-+	u16 vid = hw->mng_cookie.vlan_id;
-+        u16 old_vid = adapter->mng_vlan_id;
-+        if (adapter->vlgrp) {
-+                if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-+			if (hw->mng_cookie.status &
-+                                E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
-+                                iegbe_vlan_rx_add_vid(netdev, vid);
-+                                adapter->mng_vlan_id = vid;
-+                        } else
-+                                adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+
-+                        if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
-+                                        (vid != old_vid) &&
-+                            !vlan_group_get_device(adapter->vlgrp, old_vid))
-+                                iegbe_vlan_rx_kill_vid(netdev, old_vid);
-+                } else
-+                        adapter->mng_vlan_id = vid;
-+        }
- }
--#endif
- 
--int
--iegbe_up(struct iegbe_adapter *adapter)
-+/**
-+ * iegbe_configure - configure the hardware for RX and TX
-+ * @adapter = private board structure
-+ **/
-+static void iegbe_configure(struct iegbe_adapter *adapter)
- {
- 	struct net_device *netdev = adapter->netdev;
--	int i, err;
--	uint16_t pci_cmd;
--
--	/* hardware has been reset, we need to reload some things */
--
--	/* Reset the PHY if it was previously powered down */
--	if(adapter->hw.media_type == iegbe_media_type_copper
--        || (adapter->hw.media_type == iegbe_media_type_oem
--            && iegbe_oem_phy_is_copper(&adapter->hw))) {
--		uint16_t mii_reg;
--		iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
--        if(mii_reg & MII_CR_POWER_DOWN){
--			iegbe_phy_reset(&adapter->hw);
--	}
--    }
-+	int i;
- 
--	iegbe_set_multi(netdev);
-+	iegbe_set_rx_mode(netdev);
- 
--#ifdef NETIF_F_HW_VLAN_TX
- 	iegbe_restore_vlan(adapter);
--#endif
- 
- 	iegbe_configure_tx(adapter);
- 	iegbe_setup_rctl(adapter);
- 	iegbe_configure_rx(adapter);
-+	/* call E1000_DESC_UNUSED which always leaves
-+	 * at least 1 descriptor unused to make sure
-+	 * next_to_use != next_to_clean */
-+	for (i = 0; i < adapter->num_rx_queues; i++) {
-+		struct iegbe_rx_ring *ring = &adapter->rx_ring[i];
-+		adapter->alloc_rx_buf(adapter, ring,
-+		                      E1000_DESC_UNUSED(ring));
-+	}
- 
--#ifdef IEGBE_GBE_WORKAROUND
--	for (i = 0; i < adapter->num_queues; i++)
--		adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i],
--                              IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
--#else
--	for (i = 0; i < adapter->num_queues; i++)
--		adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
--#endif
-+	adapter->tx_queue_len = netdev->tx_queue_len;
-+}
- 
--#ifdef CONFIG_PCI_MSI
--	if(adapter->hw.mac_type > iegbe_82547_rev_2
--	   || adapter->hw.mac_type == iegbe_icp_xxxx) {
--		adapter->have_msi = TRUE;
--		if((err = pci_enable_msi(adapter->pdev))) {
--			DPRINTK(PROBE, ERR,
--			 "Unable to allocate MSI interrupt Error: %d\n", err);
--			adapter->have_msi = FALSE;
--		}
--	}
--        pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
--        pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd | IEGBE_INTD_DISABLE);
-+int iegbe_up(struct iegbe_adapter *adapter)
-+{
-+	/* hardware has been reset, we need to reload some things */
-+	iegbe_configure(adapter);
- 
--#endif
--	if((err = request_irq(adapter->pdev->irq, &iegbe_intr,
--		              SA_SHIRQ | SA_SAMPLE_RANDOM,
--		              netdev->name, netdev))) {
--		DPRINTK(PROBE, ERR,
--		    "Unable to allocate interrupt Error: %d\n", err);
--		return err;
--	}
-+	clear_bit(__E1000_DOWN, &adapter->flags);
- 
--	mod_timer(&adapter->watchdog_timer, jiffies);
-+	napi_enable(&adapter->napi);
- 
--#ifdef CONFIG_E1000_NAPI
--	netif_poll_enable(netdev);
--#endif
- 	iegbe_irq_enable(adapter);
- 
-+         adapter->hw.get_link_status = 0x1;
- 	return 0;
- }
- 
--void
--iegbe_down(struct iegbe_adapter *adapter)
--{
--	struct net_device *netdev = adapter->netdev;
--
--	iegbe_irq_disable(adapter);
--#ifdef CONFIG_E1000_MQ
--    while (atomic_read(&adapter->rx_sched_call_data.count) != 0) { };
--#endif
--	free_irq(adapter->pdev->irq, netdev);
--#ifdef CONFIG_PCI_MSI
--	if((adapter->hw.mac_type > iegbe_82547_rev_2
--		|| adapter->hw.mac_type == iegbe_icp_xxxx)
--       && adapter->have_msi == TRUE) {
--		pci_disable_msi(adapter->pdev);
--    }
--#endif
--	del_timer_sync(&adapter->tx_fifo_stall_timer);
--	del_timer_sync(&adapter->watchdog_timer);
--	del_timer_sync(&adapter->phy_info_timer);
-+/**
-+ * iegbe_power_up_phy - restore link in case the phy was powered down
-+ * @adapter: address of board private structure
-+ *
-+ * The phy may be powered down to save power and turn off link when the
-+ * driver is unloaded and wake on lan is not enabled (among others)
-+ * *** this routine MUST be followed by a call to iegbe_reset ***
-+ *
-+ **/
- 
--#ifdef CONFIG_E1000_NAPI
--	netif_poll_disable(netdev);
--#endif
--	adapter->link_speed = 0;
--	adapter->link_duplex = 0;
--	netif_carrier_off(netdev);
--	netif_stop_queue(netdev);
-+void iegbe_power_up_phy(struct iegbe_adapter *adapter)
-+{
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u16 mii_reg = 0;
- 
--	iegbe_reset(adapter);
--	iegbe_clean_all_tx_rings(adapter);
--	iegbe_clean_all_rx_rings(adapter);
-+	/* Just clear the power down bit to wake the phy back up */
-+	if (hw->media_type == iegbe_media_type_copper) {
-+		/* according to the manual, the phy will retain its
-+		 * settings across a power-down/up cycle */
-+		iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
-+		mii_reg &= ~MII_CR_POWER_DOWN;
-+		iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
-+	}
-+}
- 
--	/* If WoL is not enabled and management mode is not IAMT
--	 * or if WoL is not enabled and OEM PHY is copper based,
--	 * power down the PHY so no link is implied when interface is down */
--	if(!adapter->wol
--	   && ((adapter->hw.mac_type >= iegbe_82540
--	        && adapter->hw.media_type == iegbe_media_type_copper
--	        && !iegbe_check_mng_mode(&adapter->hw)
--	        && !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN))
--	      || (adapter->hw.media_type == iegbe_media_type_oem
--              && iegbe_oem_phy_is_copper(&adapter->hw)))){
-+static void iegbe_power_down_phy(struct iegbe_adapter *adapter)
-+{
-+	struct iegbe_hw *hw = &adapter->hw;
- 
--		uint16_t mii_reg;
--		iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-+	/* Power down the PHY so no link is implied when interface is down *
-+	 * The PHY cannot be powered down if any of the following is true *
-+	 * (a) WoL is enabled
-+	 * (b) AMT is active
-+	 * (c) SoL/IDER session is active */
-+	if (!adapter->wol && hw->mac_type >= iegbe_82540 &&
-+	   hw->media_type == iegbe_media_type_copper) {
-+		u16 mii_reg = 0;
-+
-+		switch (hw->mac_type) {
-+		case iegbe_82540:
-+		case iegbe_82545:
-+		case iegbe_82545_rev_3:
-+		case iegbe_82546:
-+		case iegbe_82546_rev_3:
-+		case iegbe_82541:
-+		case iegbe_82541_rev_2:
-+		case iegbe_82547:
-+		case iegbe_82547_rev_2:
-+			if (E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)
-+				goto out;
-+			break;
-+		case iegbe_82571:
-+		case iegbe_82572:
-+		case iegbe_82573:
-+			if (iegbe_check_mng_mode(hw) ||
-+			    iegbe_check_phy_reset_block(hw))
-+				goto out;
-+			break;
-+		default:
-+			goto out;
-+		}
-+		iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
- 		mii_reg |= MII_CR_POWER_DOWN;
--		iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
-+		iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
- 		mdelay(1);
- 	}
-+out:
-+	return;
- }
- 
--void
--iegbe_reset(struct iegbe_adapter *adapter)
-+void iegbe_down(struct iegbe_adapter *adapter)
- {
--	struct net_device *netdev = adapter->netdev;
--	uint32_t pba, manc;
--	uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
--	uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
-+    struct net_device *netdev = adapter->netdev;
- 
-+	/* signal that we're down so the interrupt handler does not
-+	 * reschedule our watchdog timer */
-+	set_bit(__E1000_DOWN, &adapter->flags);
- 
--	/* Repartition Pba for greater than 9k mtu
--	 * To take effect CTRL.RST is required.
--	 */
-+	napi_disable(&adapter->napi);
- 
--	switch (adapter->hw.mac_type) {
--	case iegbe_82547:
--	case iegbe_82547_rev_2:
--		pba = E1000_PBA_30K;
--		break;
--	case iegbe_82571:
--	case iegbe_82572:
--		pba = E1000_PBA_38K;
--		break;
--	case iegbe_82573:
--		pba = E1000_PBA_12K;
-+    iegbe_irq_disable(adapter);
-+
-+    del_timer_sync(&adapter->tx_fifo_stall_timer);
-+    del_timer_sync(&adapter->watchdog_timer);
-+    del_timer_sync(&adapter->phy_info_timer);
-+
-+	netdev->tx_queue_len = adapter->tx_queue_len;
-+	adapter->link_speed = 0;
-+	adapter->link_duplex = 0;
-+    netif_carrier_off(netdev);
-+    netif_stop_queue(netdev);
-+
-+    iegbe_reset(adapter);
-+    iegbe_clean_all_tx_rings(adapter);
-+    iegbe_clean_all_rx_rings(adapter);
-+}
-+void iegbe_reinit_locked(struct iegbe_adapter *adapter)
-+{
-+	WARN_ON(in_interrupt());
-+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
-+		msleep(1);
-+	iegbe_down(adapter);
-+	iegbe_up(adapter);
-+	clear_bit(__E1000_RESETTING, &adapter->flags);
-+}
-+
-+void iegbe_reset(struct iegbe_adapter *adapter)
-+{
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u32 pba = 0, tx_space, min_tx_space, min_rx_space;
-+	u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
-+	bool legacy_pba_adjust = false;
-+
-+    /* Repartition Pba for greater than 9k mtu
-+     * To take effect CTRL.RST is required.
-+     */
-+
-+	switch (hw->mac_type) {
-+	case iegbe_82542_rev2_0:
-+	case iegbe_82542_rev2_1:
-+	case iegbe_82543:
-+	case iegbe_82544:
-+	case iegbe_82540:
-+	case iegbe_82541:
-+	case iegbe_82541_rev_2:
-+	case iegbe_icp_xxxx:
-+		legacy_pba_adjust = true;
-+		pba = E1000_PBA_48K;
- 		break;
--	default:
-+	case iegbe_82545:
-+	case iegbe_82545_rev_3:
-+	case iegbe_82546:
-+	case iegbe_82546_rev_3:
- 		pba = E1000_PBA_48K;
- 		break;
--	}
-+    case iegbe_82547:
-+	case iegbe_82573:
-+    case iegbe_82547_rev_2:
-+		legacy_pba_adjust = true;
-+        pba = E1000_PBA_30K;
-+        break;
-+    case iegbe_82571:
-+    case iegbe_82572:
-+	case iegbe_undefined:
-+	case iegbe_num_macs:
-+        break;
-+    }
-+
-+	if (legacy_pba_adjust) {
-+		if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
-+			pba -= 8; /* allocate more FIFO for Tx */
-+        /* send an XOFF when there is enough space in the
-+         * Rx FIFO to hold one extra full size Rx packet
-+        */
- 
--	if((adapter->hw.mac_type != iegbe_82573) &&
--	   (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) {
--        pba -= 0x8; /* allocate more FIFO for Tx */
--		/* send an XOFF when there is enough space in the
--		 * Rx FIFO to hold one extra full size Rx packet
--		*/
--		fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
--                    ETHERNET_FCS_SIZE + 0x1;
--        fc_low_water_mark = fc_high_water_mark + 0x8;
--	}
- 
-+		if (hw->mac_type == iegbe_82547) {
-+			adapter->tx_fifo_head = 0;
-+        adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
-+        adapter->tx_fifo_size =
-+            (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
-+			atomic_set(&adapter->tx_fifo_stall, 0);
-+    }
-+	} else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
-+		E1000_WRITE_REG(&adapter->hw, PBA, pba);
-+
-+		/* To maintain wire speed transmits, the Tx FIFO should be
-+		 * large enough to accomodate two full transmit packets,
-+		 * rounded up to the next 1KB and expressed in KB.  Likewise,
-+		 * the Rx FIFO should be large enough to accomodate at least
-+		 * one full receive packet and is similarly rounded up and
-+		 * expressed in KB. */
-+		pba = 	E1000_READ_REG(&adapter->hw, PBA);
-+		/* upper 16 bits has Tx packet buffer allocation size in KB */
-+		tx_space = pba >> 16;
-+		/* lower 16 bits has Rx packet buffer allocation size in KB */
-+		pba &= 0xffff;
-+		/* don't include ethernet FCS because hardware appends/strips */
-+		min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
-+		               VLAN_TAG_SIZE;
-+		min_tx_space = min_rx_space;
-+		min_tx_space *= 2;
-+		min_tx_space = ALIGN(min_tx_space, 1024);
-+		min_tx_space >>= 10;
-+		min_rx_space = ALIGN(min_rx_space, 1024);
-+		min_rx_space >>= 10;
-+
-+		/* If current Tx allocation is less than the min Tx FIFO size,
-+		 * and the min Tx FIFO size is less than the current Rx FIFO
-+		 * allocation, take space away from current Rx allocation */
-+		if (tx_space < min_tx_space &&
-+		    ((min_tx_space - tx_space) < pba)) {
-+			pba = pba - (min_tx_space - tx_space);
-+
-+			/* PCI/PCIx hardware has PBA alignment constraints */
-+			switch (hw->mac_type) {
-+			case iegbe_82545 ... iegbe_82546_rev_3:
-+				pba &= ~(E1000_PBA_8K - 1);
-+				break;
-+			default:
-+				break;
-+			}
- 
--	if(adapter->hw.mac_type == iegbe_82547) {
--		adapter->tx_fifo_head = 0;
--		adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
--		adapter->tx_fifo_size =
--			(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
--		atomic_set(&adapter->tx_fifo_stall, 0);
-+			/* if short on rx space, rx wins and must trump tx
-+			 * adjustment or use Early Receive if available */
-+			if (pba < min_rx_space) {
-+				switch (hw->mac_type) {
-+				case iegbe_82573:
-+					/* ERT enabled in iegbe_configure_rx */
-+					break;
-+				default:
-+					pba = min_rx_space;
-+					break;
-+				}
-+			}
-+		}
- 	}
- 
- 	E1000_WRITE_REG(&adapter->hw, PBA, pba);
- 
- 	/* flow control settings */
--	adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
--				    fc_high_water_mark;
--	adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
--				   fc_low_water_mark;
--	adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
--	adapter->hw.fc_send_xon = 1;
--	adapter->hw.fc = adapter->hw.original_fc;
-+	/* Set the FC high water mark to 90% of the FIFO size.
-+	 * Required to clear last 3 LSB */
-+	fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
-+	/* We can't use 90% on small FIFOs because the remainder
-+	 * would be less than 1 full frame.  In this case, we size
-+	 * it to allow at least a full frame above the high water
-+	 *  mark. */
-+	if (pba < E1000_PBA_16K)
-+		fc_high_water_mark = (pba * 1024) - 1600;
-+
-+	hw->fc_high_water = fc_high_water_mark;
-+	hw->fc_low_water = fc_high_water_mark - 8;
-+		hw->fc_pause_time = E1000_FC_PAUSE_TIME;
-+	hw->fc_send_xon = 1;
-+	hw->fc = hw->original_fc;
- 
- 	/* Allow time for pending master requests to run */
--	iegbe_reset_hw(&adapter->hw);
--    if(adapter->hw.mac_type >= iegbe_82544){
-+	iegbe_reset_hw(hw);
-+	if (hw->mac_type >= iegbe_82544)
- 		E1000_WRITE_REG(&adapter->hw, WUC, 0);
--    }
--    if(iegbe_init_hw(&adapter->hw)) {
-+
-+	if (iegbe_init_hw(hw))
- 		DPRINTK(PROBE, ERR, "Hardware Error\n");
--    }
--#ifdef NETIF_F_HW_VLAN_TX
- 	iegbe_update_mng_vlan(adapter);
--#endif
-+
-+	/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
-+	if (hw->mac_type >= iegbe_82544 &&
-+	    hw->mac_type <= iegbe_82547_rev_2 &&
-+	    hw->autoneg == 1 &&
-+	    hw->autoneg_advertised == ADVERTISE_1000_FULL) {
-+		u32 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+		/* clear phy power management bit if we are in gig only mode,
-+		 * which if enabled will attempt negotiation to 100Mb, which
-+		 * can cause a loss of link at power off or driver unload */
-+		ctrl &= ~E1000_CTRL_SWDPIN3;
-+		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+	}
-+
- 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
- 	E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
- 
--	iegbe_reset_adaptive(&adapter->hw);
--	iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
--	if(adapter->en_mng_pt) {
--		manc = E1000_READ_REG(&adapter->hw, MANC);
--		manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
--		E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+	iegbe_reset_adaptive(hw);
-+	iegbe_phy_get_info(hw, &adapter->phy_info);
-+
-+	if (!adapter->smart_power_down &&
-+	    (hw->mac_type == iegbe_82571 ||
-+	     hw->mac_type == iegbe_82572)) {
-+		u16 phy_data = 0;
-+		/* speed up time to link by disabling smart power down, ignore
-+		 * the return value of this function because there is nothing
-+		 * different we would do if it failed */
-+		iegbe_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-+		                   &phy_data);
-+		phy_data &= ~IGP02E1000_PM_SPD;
-+		iegbe_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-+		                    phy_data);
-+	}
-+
-+}
-+
-+/**
-+ *  Dump the eeprom for users having checksum issues
-+ **/
-+static void iegbe_dump_eeprom(struct iegbe_adapter *adapter)
-+{
-+	struct net_device *netdev = adapter->netdev;
-+	struct ethtool_eeprom eeprom;
-+	const struct ethtool_ops *ops = netdev->ethtool_ops;
-+	u8 *data;
-+	int i;
-+	u16 csum_old, csum_new = 0;
-+
-+	eeprom.len = ops->get_eeprom_len(netdev);
-+	eeprom.offset = 0;
-+
-+	data = kmalloc(eeprom.len, GFP_KERNEL);
-+	if (!data) {
-+		printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
-+		       " data\n");
-+		return;
- 	}
-+
-+	ops->get_eeprom(netdev, &eeprom, data);
-+
-+	csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
-+		   (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
-+	for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
-+		csum_new += data[i] + (data[i + 1] << 8);
-+	csum_new = EEPROM_SUM - csum_new;
-+
-+	printk(KERN_ERR "/*********************/\n");
-+	printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
-+	printk(KERN_ERR "Calculated              : 0x%04x\n", csum_new);
-+
-+	printk(KERN_ERR "Offset    Values\n");
-+	printk(KERN_ERR "========  ======\n");
-+	print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
-+
-+	printk(KERN_ERR "Include this output when contacting your support "
-+	       "provider.\n");
-+	printk(KERN_ERR "This is not a software error! Something bad "
-+	       "happened to your hardware or\n");
-+	printk(KERN_ERR "EEPROM image. Ignoring this "
-+	       "problem could result in further problems,\n");
-+	printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
-+	printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
-+	       "which is invalid\n");
-+	printk(KERN_ERR "and requires you to set the proper MAC "
-+	       "address manually before continuing\n");
-+	printk(KERN_ERR "to enable this network device.\n");
-+	printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
-+	       "to your hardware vendor\n");
-+	printk(KERN_ERR "or Intel Customer Support.\n");
-+	printk(KERN_ERR "/*********************/\n");
-+
-+	kfree(data);
- }
- 
- /**
-@@ -721,184 +735,166 @@ iegbe_reset(struct iegbe_adapter *adapte
-  * The OS initialization, configuring of the adapter private structure,
-  * and a hardware reset occur.
-  **/
--
--static int __devinit
--iegbe_probe(struct pci_dev *pdev,
-+static int __devinit iegbe_probe(struct pci_dev *pdev,
-             const struct pci_device_id *ent)
- {
--	struct net_device *netdev;
--	struct iegbe_adapter *adapter;
--	unsigned long mmio_start, mmio_len;
--	uint32_t ctrl_ext;
--	uint32_t swsm;
-+    struct net_device *netdev;
-+    struct iegbe_adapter *adapter;
-+	struct iegbe_hw *hw;
- 
- 	static int cards_found = 0;
-+    int i, err, pci_using_dac;
-+	u16 eeprom_data = 0;
-+	u16 eeprom_apme_mask = E1000_EEPROM_APME;
-+	int bars; 
-+	DECLARE_MAC_BUF(mac);
- 
--	int i, err, pci_using_dac;
--	uint16_t eeprom_data = 0;
--	uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
-+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
-+	err = pci_enable_device(pdev);
- 
-+	if (err)
-+        return err;
- 
--    if((err = pci_enable_device(pdev))) {
--		return err;
--    }
--	if(!(err = pci_set_dma_mask(pdev, PCI_DMA_64BIT))) {
-+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
-+	    !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
- 		pci_using_dac = 1;
--	} else {
--		if((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
--			E1000_ERR("No usable DMA configuration, aborting\n");
--			return err;
--		}
-+        } else {
-+             err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-+   	     if (err) {
-+			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-+			if (err) {
-+				E1000_ERR("No usable DMA configuration, "
-+					  "aborting\n");
-+				goto err_dma;
-+        }
-+    }
- 		pci_using_dac = 0;
--	}
--
--    if((err = pci_request_regions(pdev, iegbe_driver_name))) {
--		return err;
-     }
--	pci_set_master(pdev);
- 
--	netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
--	if(!netdev) {
--		err = -ENOMEM;
--		goto err_alloc_etherdev;
--	}
-+	err = pci_request_selected_regions(pdev, bars, iegbe_driver_name);
-+	if (err)
-+		goto err_pci_reg;
-+
-+    pci_set_master(pdev);
-+
-+	err = -ENOMEM;
-+    netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
-+	if (!netdev)
-+        goto err_alloc_etherdev;
- 
--	SET_MODULE_OWNER(netdev);
- 	SET_NETDEV_DEV(netdev, &pdev->dev);
- 
--	pci_set_drvdata(pdev, netdev);
--	adapter = netdev_priv(netdev);
--	adapter->netdev = netdev;
--	adapter->pdev = pdev;
--	adapter->hw.back = adapter;
--    adapter->msg_enable = (0x1 << debug) - 0x1;
--
--	mmio_start = pci_resource_start(pdev, BAR_0);
--	mmio_len = pci_resource_len(pdev, BAR_0);
--
--	adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
--	if(!adapter->hw.hw_addr) {
--		err = -EIO;
--		goto err_ioremap;
--	}
--
--	for(i = BAR_1; i <= BAR_5; i++) {
--        if(pci_resource_len(pdev, i) == 0) {
--			continue;
--        }
--		if(pci_resource_flags(pdev, i) & IORESOURCE_IO) {
--			adapter->hw.io_base = pci_resource_start(pdev, i);
--			break;
--		}
--	}
--
--	netdev->open = &iegbe_open;
--	netdev->stop = &iegbe_close;
--	netdev->hard_start_xmit = &iegbe_xmit_frame;
--	netdev->get_stats = &iegbe_get_stats;
--	netdev->set_multicast_list = &iegbe_set_multi;
-+    pci_set_drvdata(pdev, netdev);
-+    adapter = netdev_priv(netdev);
-+    adapter->netdev = netdev;
-+    adapter->pdev = pdev;
-+	adapter->msg_enable = (1 << debug) - 1;
-+	adapter->bars = bars;
-+
-+	hw = &adapter->hw;
-+	hw->back = adapter;
-+
-+        err = -EIO;
-+	hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-+			      pci_resource_len(pdev, BAR_0));
-+	if (!hw->hw_addr)
-+        goto err_ioremap;
-+
-+    netdev->open = &iegbe_open;
-+    netdev->stop = &iegbe_close;
-+    netdev->hard_start_xmit = &iegbe_xmit_frame;
-+    netdev->get_stats = &iegbe_get_stats;
-+	netdev->set_rx_mode = &iegbe_set_rx_mode;
- 	netdev->set_mac_address = &iegbe_set_mac;
--	netdev->change_mtu = &iegbe_change_mtu;
--	netdev->do_ioctl = &iegbe_ioctl;
-+    netdev->change_mtu = &iegbe_change_mtu;
-+    netdev->do_ioctl = &iegbe_ioctl;
- 	set_ethtool_ops(netdev);
--#ifdef HAVE_TX_TIMEOUT
--	netdev->tx_timeout = &iegbe_tx_timeout;
--    netdev->watchdog_timeo = 0x5 * HZ;
--#endif
--#ifdef CONFIG_E1000_NAPI
--	netdev->poll = &iegbe_clean;
--    netdev->weight = 0x40;
--#endif
--#ifdef NETIF_F_HW_VLAN_TX
--	netdev->vlan_rx_register = iegbe_vlan_rx_register;
--	netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
--	netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
--#endif
-+    netdev->tx_timeout = &iegbe_tx_timeout;
-+	netdev->watchdog_timeo = 5 * HZ;
-+	netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
-+    netdev->vlan_rx_register = iegbe_vlan_rx_register;
-+    netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
-+    netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
- #ifdef CONFIG_NET_POLL_CONTROLLER
--	netdev->poll_controller = iegbe_netpoll;
-+    netdev->poll_controller = iegbe_netpoll;
- #endif
--	strcpy(netdev->name, pci_name(pdev));
-+	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
- 
--	netdev->mem_start = mmio_start;
--	netdev->mem_end = mmio_start + mmio_len;
--	netdev->base_addr = adapter->hw.io_base;
- 
--	adapter->bd_number = cards_found;
-+    adapter->bd_number = cards_found;
- 
--	/* setup the private structure */
-+    /* setup the private structure */
- 
--    if((err = iegbe_sw_init(adapter))) {
--		goto err_sw_init;
--    }
--    if((err = iegbe_check_phy_reset_block(&adapter->hw))) {
--		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
--    }
--#ifdef MAX_SKB_FRAGS
--	if(adapter->hw.mac_type >= iegbe_82543) {
--#ifdef NETIF_F_HW_VLAN_TX
--		netdev->features = NETIF_F_SG |
--				   NETIF_F_HW_CSUM |
--				   NETIF_F_HW_VLAN_TX |
--				   NETIF_F_HW_VLAN_RX |
--				   NETIF_F_HW_VLAN_FILTER;
--#else
--		netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM;
--#endif
--	}
-+	err = iegbe_sw_init(adapter);
-+	if (err)
-+        goto err_sw_init;
-+	err = -EIO;
-+	if (iegbe_check_phy_reset_block(hw))
-+        DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
- 
--#ifdef NETIF_F_TSO
--	if((adapter->hw.mac_type >= iegbe_82544) &&
--       (adapter->hw.mac_type != iegbe_82547)) {
--		netdev->features |= NETIF_F_TSO;
--    }
--#ifdef NETIF_F_TSO_IPV6
--    if(adapter->hw.mac_type > iegbe_82547_rev_2) {
--		netdev->features |= NETIF_F_TSO_IPV6;
--    }
--#endif
--#endif
--    if(pci_using_dac) {
--		netdev->features |= NETIF_F_HIGHDMA;
-+	if (hw->mac_type >= iegbe_82543) {
-+        netdev->features = NETIF_F_SG |
-+                   NETIF_F_HW_CSUM |
-+                   NETIF_F_HW_VLAN_TX |
-+                   NETIF_F_HW_VLAN_RX |
-+                   NETIF_F_HW_VLAN_FILTER;
-     }
--#endif
--#ifdef NETIF_F_LLTX
--	netdev->features |= NETIF_F_LLTX;
--#endif
- 
--	adapter->en_mng_pt = iegbe_enable_mng_pass_thru(&adapter->hw);
-+	if ((hw->mac_type >= iegbe_82544) &&
-+	   (hw->mac_type != iegbe_82547))
-+        netdev->features |= NETIF_F_TSO;
- 
--	/* before reading the EEPROM, reset the controller to
--	 * put the device in a known good starting state */
-+	if (hw->mac_type > iegbe_82547_rev_2)
-+		netdev->features |= NETIF_F_TSO6;
-+	if (pci_using_dac)
-+        netdev->features |= NETIF_F_HIGHDMA;
-+
-+    netdev->features |= NETIF_F_LLTX;
- 
--	iegbe_reset_hw(&adapter->hw);
-+	adapter->en_mng_pt = iegbe_enable_mng_pass_thru(hw);
- 
--	/* make sure the EEPROM is good */
--	if(iegbe_validate_eeprom_checksum(&adapter->hw) < 0) {
--		DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
--		err = -EIO;
-+	/* initialize eeprom parameters */
-+
-+	if (iegbe_init_eeprom_params(hw)) {
-+		E1000_ERR("EEPROM initialization failed\n");
- 		goto err_eeprom;
- 	}
- 
--	/* copy the MAC address out of the EEPROM */
-+	/* before reading the EEPROM, reset the controller to
-+	 * put the device in a known good starting state */
- 
--    if(iegbe_read_mac_addr(&adapter->hw)) {
--		DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
--    }
--	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
-+	iegbe_reset_hw(hw);
- 
--	if(!is_valid_ether_addr(netdev->dev_addr)) {
--		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
--		err = -EIO;
--		goto err_eeprom;
--	}
-+    /* make sure the EEPROM is good */
-+	if (iegbe_validate_eeprom_checksum(hw) < 0) {
-+        DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
-+		iegbe_dump_eeprom(adapter);
-+		/*
-+		 * set MAC address to all zeroes to invalidate and temporary
-+		 * disable this device for the user. This blocks regular
-+		 * traffic while still permitting ethtool ioctls from reaching
-+		 * the hardware as well as allowing the user to run the
-+		 * interface after manually setting a hw addr using
-+		 * `ip set address`
-+		 */
-+		memset(hw->mac_addr, 0, netdev->addr_len);
-+	} else {
-+		/* copy the MAC address out of the EEPROM */
-+		if (iegbe_read_mac_addr(hw))
-+			DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
-+	}
-+	/* don't block initalization here due to bad MAC address */
-+	memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
-+	memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
- 
--	iegbe_read_part_num(&adapter->hw, &(adapter->part_num));
-+	if (!is_valid_ether_addr(netdev->perm_addr))
-+		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
- 
--	iegbe_get_bus_info(&adapter->hw);
-+	iegbe_get_bus_info(hw);
- 
- 	init_timer(&adapter->tx_fifo_stall_timer);
- 	adapter->tx_fifo_stall_timer.function = &iegbe_82547_tx_fifo_stall;
--	adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
-+	adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
- 
- 	init_timer(&adapter->watchdog_timer);
- 	adapter->watchdog_timer.function = &iegbe_watchdog;
-@@ -906,75 +902,50 @@ iegbe_probe(struct pci_dev *pdev,
- 
- 	init_timer(&adapter->phy_info_timer);
- 	adapter->phy_info_timer.function = &iegbe_update_phy_info;
--	adapter->phy_info_timer.data = (unsigned long) adapter;
--
--	INIT_WORK(&adapter->tx_timeout_task,
--		(void (*)(void *))iegbe_tx_timeout_task, netdev);
-+	adapter->phy_info_timer.data = (unsigned long)adapter;
- 
--	/* we're going to reset, so assume we have no link for now */
--
--	netif_carrier_off(netdev);
--	netif_stop_queue(netdev);
-+	INIT_WORK(&adapter->reset_task, iegbe_reset_task);
- 
--	iegbe_check_options(adapter);
-+    iegbe_check_options(adapter);
- 
--	/* Initial Wake on LAN setting
--	 * If APM wake is enabled in the EEPROM,
--	 * enable the ACPI Magic Packet filter
--	 */
-+    /* Initial Wake on LAN setting
-+     * If APM wake is enabled in the EEPROM,
-+     * enable the ACPI Magic Packet filter
-+     */
- 
--	switch(adapter->hw.mac_type) {
--	case iegbe_82542_rev2_0:
--	case iegbe_82542_rev2_1:
--	case iegbe_82543:
--		break;
--	case iegbe_82544:
--		iegbe_read_eeprom(&adapter->hw,
--			EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
--		eeprom_apme_mask = E1000_EEPROM_82544_APM;
--		break;
-+    switch(adapter->hw.mac_type) {
-+    case iegbe_82542_rev2_0:
-+    case iegbe_82542_rev2_1:
-+    case iegbe_82543:
-+        break;
-+    case iegbe_82544:
-+        iegbe_read_eeprom(&adapter->hw,
-+            EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
-+        eeprom_apme_mask = E1000_EEPROM_82544_APM;
-+        break;
-     case iegbe_icp_xxxx:
--		iegbe_read_eeprom(&adapter->hw,
--			EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
--			1, &eeprom_data);
--		eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
--		break;
--	case iegbe_82546:
--	case iegbe_82546_rev_3:
--		if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
--		   && (adapter->hw.media_type == iegbe_media_type_copper)) {
--			iegbe_read_eeprom(&adapter->hw,
--				EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
--			break;
--		}
--		/* Fall Through */
--	default:
--		iegbe_read_eeprom(&adapter->hw,
--			EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
--		break;
--	}
-+        iegbe_read_eeprom(&adapter->hw,
-+            EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
-+            1, &eeprom_data);
-+        eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
-+        break;
-+    case iegbe_82546:
-+    case iegbe_82546_rev_3:
-+        if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
-+           && (adapter->hw.media_type == iegbe_media_type_copper)) {
-+            iegbe_read_eeprom(&adapter->hw,
-+                EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
-+            break;
-+        }
-+        /* Fall Through */
-+    default:
-+        iegbe_read_eeprom(&adapter->hw,
-+            EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
-+        break;
-+    }
-     if(eeprom_data & eeprom_apme_mask) {
--		adapter->wol |= E1000_WUFC_MAG;
-+        adapter->wol |= E1000_WUFC_MAG;
-     }
--	/* reset the hardware with the new settings */
--	iegbe_reset(adapter);
--
--	/* Let firmware know the driver has taken over */
--	switch(adapter->hw.mac_type) {
--	case iegbe_82571:
--	case iegbe_82572:
--		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
--		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
--				ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
--		break;
--	case iegbe_82573:
--		swsm = E1000_READ_REG(&adapter->hw, SWSM);
--		E1000_WRITE_REG(&adapter->hw, SWSM,
--				swsm | E1000_SWSM_DRV_LOAD);
--		break;
--	default:
--		break;
--	}
- 
-     /* The ICP_xxxx device has multiple, duplicate interrupt
-      * registers, so disable all but the first one
-@@ -987,24 +958,40 @@ iegbe_probe(struct pci_dev *pdev,
-         E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
-     }
- 
--	strcpy(netdev->name, "eth%d");
--    if((err = register_netdev(netdev))) {
--		goto err_register;
--    }
-+	iegbe_reset(adapter);
-+	netif_carrier_off(netdev);
-+	netif_stop_queue(netdev);
-+    strcpy(netdev->name, "eth%d");
-+	err = register_netdev(netdev);
-+	if (err)
-+        goto err_register;
-+
-     DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
- 
--	cards_found++;
--	return 0;
-+    cards_found++;
-+    return 0;
- 
- err_register:
--err_sw_init:
- err_eeprom:
--	iounmap(adapter->hw.hw_addr);
-+	if (!iegbe_check_phy_reset_block(hw))
-+		iegbe_phy_hw_reset(hw);
-+	if (hw->flash_address)
-+		iounmap(hw->flash_address);
-+	for (i = 0; i < adapter->num_rx_queues; i++)
-+		dev_put(&adapter->polling_netdev[i]);
-+	kfree(adapter->tx_ring);
-+	kfree(adapter->rx_ring);
-+	kfree(adapter->polling_netdev);
-+err_sw_init:
-+	iounmap(hw->hw_addr);
- err_ioremap:
--	free_netdev(netdev);
-+    free_netdev(netdev);
- err_alloc_etherdev:
--	pci_release_regions(pdev);
--	return err;
-+	pci_release_selected_regions(pdev, bars);
-+err_pci_reg:
-+err_dma:
-+	pci_disable_device(pdev);
-+    return err;
- }
- 
- /**
-@@ -1020,64 +1007,36 @@ err_alloc_etherdev:
- static void __devexit
- iegbe_remove(struct pci_dev *pdev)
- {
--	struct net_device *netdev = pci_get_drvdata(pdev);
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t ctrl_ext;
--	uint32_t manc, swsm;
--#ifdef CONFIG_E1000_NAPI
--	int i;
--#endif
--
--	if(adapter->hw.mac_type >= iegbe_82540
--	   && adapter->hw.mac_type != iegbe_icp_xxxx
--	   && adapter->hw.media_type == iegbe_media_type_copper) {
--		manc = E1000_READ_REG(&adapter->hw, MANC);
--		if(manc & E1000_MANC_SMBUS_EN) {
--			manc |= E1000_MANC_ARP_EN;
--			E1000_WRITE_REG(&adapter->hw, MANC, manc);
--		}
--	}
--
--	switch(adapter->hw.mac_type) {
--	case iegbe_82571:
--	case iegbe_82572:
--		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
--		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
--				ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
--		break;
--	case iegbe_82573:
--		swsm = E1000_READ_REG(&adapter->hw, SWSM);
--		E1000_WRITE_REG(&adapter->hw, SWSM,
--				swsm & ~E1000_SWSM_DRV_LOAD);
--		break;
--
--	default:
--		break;
--	}
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    uint32_t manc;
-+    int i;
-+
-+    if(adapter->hw.mac_type >= iegbe_82540
-+       && adapter->hw.mac_type != iegbe_icp_xxxx
-+       && adapter->hw.media_type == iegbe_media_type_copper) {
-+        manc = E1000_READ_REG(&adapter->hw, MANC);
-+        if(manc & E1000_MANC_SMBUS_EN) {
-+            manc |= E1000_MANC_ARP_EN;
-+            E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+        }
-+    }
- 
--	unregister_netdev(netdev);
--#ifdef CONFIG_E1000_NAPI
--	for (i = 0; i < adapter->num_queues; i++)
-+    unregister_netdev(netdev);
-+    for (i = 0x0; i < adapter->num_rx_queues; i++)
- 		dev_put(&adapter->polling_netdev[i]);
--#endif
- 
-     if(!iegbe_check_phy_reset_block(&adapter->hw)) {
--		iegbe_phy_hw_reset(&adapter->hw);
-+        iegbe_phy_hw_reset(&adapter->hw);
-     }
--	kfree(adapter->tx_ring);
--	kfree(adapter->rx_ring);
--#ifdef CONFIG_E1000_NAPI
--	kfree(adapter->polling_netdev);
--#endif
-+    kfree(adapter->tx_ring);
-+    kfree(adapter->rx_ring);
-+    kfree(adapter->polling_netdev);
- 
--	iounmap(adapter->hw.hw_addr);
--	pci_release_regions(pdev);
-+    iounmap(adapter->hw.hw_addr);
-+    pci_release_regions(pdev);
- 
--#ifdef CONFIG_E1000_MQ
--	free_percpu(adapter->cpu_netdev);
--	free_percpu(adapter->cpu_tx_ring);
--#endif
--	free_netdev(netdev);
-+    free_netdev(netdev);
- }
- 
- /**
-@@ -1092,118 +1051,78 @@ iegbe_remove(struct pci_dev *pdev)
- static int __devinit
- iegbe_sw_init(struct iegbe_adapter *adapter)
- {
--	struct iegbe_hw *hw = &adapter->hw;
--	struct net_device *netdev = adapter->netdev;
--	struct pci_dev *pdev = adapter->pdev;
--#ifdef CONFIG_E1000_NAPI
--	int i;
--#endif
-+    struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+    struct pci_dev *pdev = adapter->pdev;
-+    int i;
- 
--	/* PCI config space info */
-+    /* PCI config space info */
- 
--	hw->vendor_id = pdev->vendor;
--	hw->device_id = pdev->device;
--	hw->subsystem_vendor_id = pdev->subsystem_vendor;
--	hw->subsystem_id = pdev->subsystem_device;
-+    hw->vendor_id = pdev->vendor;
-+    hw->device_id = pdev->device;
-+    hw->subsystem_vendor_id = pdev->subsystem_vendor;
-+    hw->subsystem_id = pdev->subsystem_device;
- 
--	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
-+    pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
- 
--	pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-+    pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
- 
--	adapter->rx_buffer_len = E1000_RXBUFFER_2048;
--	adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
--	hw->max_frame_size = netdev->mtu +
--			     ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
--	hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
-+    adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-+    adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
-+    hw->max_frame_size = netdev->mtu +
-+                 ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-+    hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
- 
--	/* identify the MAC */
-+    /* identify the MAC */
- 
--	if(iegbe_set_mac_type(hw)) {
-+	if (iegbe_set_mac_type(hw)) {
- 		DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
- 		return -EIO;
- 	}
- 
--	/* initialize eeprom parameters */
--
--	if(iegbe_init_eeprom_params(hw)) {
--		E1000_ERR("EEPROM initialization failed\n");
--		return -EIO;
--	}
--
--	switch(hw->mac_type) {
--	default:
--		break;
--	case iegbe_82541:
--	case iegbe_82547:
--	case iegbe_82541_rev_2:
--	case iegbe_82547_rev_2:
--        hw->phy_init_script = 0x1;
--		break;
--	}
--
--	iegbe_set_media_type(hw);
-+    iegbe_set_media_type(hw);
- 
--  	hw->wait_autoneg_complete = FALSE;
--	hw->tbi_compatibility_en = TRUE;
--	hw->adaptive_ifs = TRUE;
-+    hw->wait_autoneg_complete = FALSE;
-+    hw->tbi_compatibility_en = TRUE;
-+    hw->adaptive_ifs = TRUE;
- 
--	/* Copper options */
-+    /* Copper options */
- 
--	if(hw->media_type == iegbe_media_type_copper
-+    if(hw->media_type == iegbe_media_type_copper
-         || (hw->media_type == iegbe_media_type_oem
-             && iegbe_oem_phy_is_copper(&adapter->hw))) {
--		hw->mdix = AUTO_ALL_MODES;
--		hw->disable_polarity_correction = FALSE;
--		hw->master_slave = E1000_MASTER_SLAVE;
--	}
-+        hw->mdix = AUTO_ALL_MODES;
-+        hw->disable_polarity_correction = FALSE;
-+        hw->master_slave = E1000_MASTER_SLAVE;
-+    }
- 
--#ifdef CONFIG_E1000_MQ
--	/* Number of supported queues */
--	switch (hw->mac_type) {
--	case iegbe_82571:
--	case iegbe_82572:
--        adapter->num_queues = 0x2;
--		break;
--	default:
--        adapter->num_queues = 0x1;
--		break;
--	}
--	adapter->num_queues = min(adapter->num_queues, num_online_cpus());
--#else
--    adapter->num_queues = 0x1;
--#endif
-+	adapter->num_tx_queues = 0x1;
-+	adapter->num_rx_queues = 0x1;
- 
- 	if (iegbe_alloc_queues(adapter)) {
- 		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
- 		return -ENOMEM;
- 	}
- 
--#ifdef CONFIG_E1000_NAPI
--	for (i = 0; i < adapter->num_queues; i++) {
-+	for (i = 0; i < adapter->num_rx_queues; i++) {
- 		adapter->polling_netdev[i].priv = adapter;
--		adapter->polling_netdev[i].poll = &iegbe_clean;
--        adapter->polling_netdev[i].weight = 0x40;
- 		dev_hold(&adapter->polling_netdev[i]);
- 		set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
- 	}
--#endif
--
--#ifdef CONFIG_E1000_MQ
--	iegbe_setup_queue_mapping(adapter);
--#endif
-+	spin_lock_init(&adapter->tx_queue_lock);
- 
-         /*
--	 * for ICP_XXXX style controllers, it is necessary to keep
--	 * track of the last known state of the link to determine if
--	 * the link experienced a change in state when iegbe_watchdog
--	 * fires
--	 */
--	adapter->hw.icp_xxxx_is_link_up = FALSE;
-+     * for ICP_XXXX style controllers, it is necessary to keep
-+     * track of the last known state of the link to determine if
-+     * the link experienced a change in state when iegbe_watchdog
-+     * fires
-+     */
-+    adapter->hw.icp_xxxx_is_link_up = FALSE;
- 
--	atomic_set(&adapter->irq_sem, 1);
--	spin_lock_init(&adapter->stats_lock);
-+    spin_lock_init(&adapter->stats_lock);
- 
--	return 0;
-+	set_bit(__E1000_DOWN, &adapter->flags);
-+    return 0x0;
- }
- 
- /**
-@@ -1218,71 +1137,31 @@ iegbe_sw_init(struct iegbe_adapter *adap
- static int __devinit
- iegbe_alloc_queues(struct iegbe_adapter *adapter)
- {
--	int size;
- 
--	size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
--	adapter->tx_ring = kmalloc(size, GFP_KERNEL);
--    if (!adapter->tx_ring){
-+
-+	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
-+	                           sizeof(struct iegbe_tx_ring), GFP_KERNEL);
-+	if (!adapter->tx_ring)
- 		return -ENOMEM;
--    }
--	memset(adapter->tx_ring, 0, size);
- 
--	size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
--	adapter->rx_ring = kmalloc(size, GFP_KERNEL);
-+	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
-+	                           sizeof(struct iegbe_rx_ring), GFP_KERNEL);
- 	if (!adapter->rx_ring) {
- 		kfree(adapter->tx_ring);
- 		return -ENOMEM;
- 	}
--	memset(adapter->rx_ring, 0, size);
- 
--#ifdef CONFIG_E1000_NAPI
--	size = sizeof(struct net_device) * adapter->num_queues;
--	adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
-+	adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
-+	                                  sizeof(struct net_device),
-+	                                  GFP_KERNEL);
- 	if (!adapter->polling_netdev) {
- 		kfree(adapter->tx_ring);
- 		kfree(adapter->rx_ring);
- 		return -ENOMEM;
- 	}
--	memset(adapter->polling_netdev, 0, size);
--#endif
--
--	return E1000_SUCCESS;
--}
- 
--#ifdef CONFIG_E1000_MQ
--static void __devinit
--iegbe_setup_queue_mapping(struct iegbe_adapter *adapter)
--{
--	int i, cpu;
--
--	adapter->rx_sched_call_data.func = iegbe_rx_schedule;
--	adapter->rx_sched_call_data.info = adapter->netdev;
--	cpus_clear(adapter->rx_sched_call_data.cpumask);
--
--	adapter->cpu_netdev = alloc_percpu(struct net_device *);
--	adapter->cpu_tx_ring = alloc_percpu(struct iegbe_tx_ring *);
--
--	lock_cpu_hotplug();
--	i = 0;
--	for_each_online_cpu(cpu) {
--        *per_cpu_ptr(adapter->cpu_tx_ring, cpu) =
--                  &adapter->tx_ring[i % adapter->num_queues];
--		/* This is incomplete because we'd like to assign separate
--		 * physical cpus to these netdev polling structures and
--		 * avoid saturating a subset of cpus.
--		 */
--		if (i < adapter->num_queues) {
--            *per_cpu_ptr(adapter->cpu_netdev, cpu) =
--                &adapter->polling_netdev[i];
--			adapter->cpu_for_queue[i] = cpu;
--        } else {
--			*per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
--        }
--		i++;
--	}
--	unlock_cpu_hotplug();
-+    return E1000_SUCCESS;
- }
--#endif
- 
- /**
-  * iegbe_open - Called when a network interface is made active
-@@ -1300,40 +1179,62 @@ iegbe_setup_queue_mapping(struct iegbe_a
- static int
- iegbe_open(struct net_device *netdev)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	int err;
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_hw *hw = &adapter->hw;
-+    int err;
-+
- 
-+    /* allocate receive descriptors */
-+	if (test_bit(__E1000_TESTING, &adapter->flags))
-+		return -EBUSY;
- 
--	/* allocate receive descriptors */
-+    /* allocate transmit descriptors */
-+	err = iegbe_setup_all_tx_resources(adapter);
-+	if (err)
-+        goto err_setup_tx;
- 
--    if ((err = iegbe_setup_all_rx_resources(adapter))) {
-+	err = iegbe_setup_all_rx_resources(adapter);
-+	if (err)
- 		goto err_setup_rx;
--    }
--	/* allocate transmit descriptors */
--    if ((err = iegbe_setup_all_tx_resources(adapter))) {
--		goto err_setup_tx;
--    }
--    if ((err = iegbe_up(adapter))) {
--		goto err_up;
--    }
--#ifdef NETIF_F_HW_VLAN_TX
--	adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
--	if ((adapter->hw.mng_cookie.status &
--			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
--		iegbe_update_mng_vlan(adapter);
--	}
--#endif
- 
--	return E1000_SUCCESS;
-+	iegbe_power_up_phy(adapter);
-+    adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+	if ((hw->mng_cookie.status &
-+              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
-+        iegbe_update_mng_vlan(adapter);
-+    }
-+
-+	/* before we allocate an interrupt, we must be ready to handle it.
-+	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
-+	 * as soon as we call pci_request_irq, so we have to setup our
-+	 * clean_rx handler before we do so.  */
-+	iegbe_configure(adapter);
-+	err = iegbe_request_irq(adapter);
-+	if (err)
-+		goto err_req_irq;
- 
--err_up:
--	iegbe_free_all_tx_resources(adapter);
--err_setup_tx:
--	iegbe_free_all_rx_resources(adapter);
-+	/* From here on the code is the same as iegbe_up() */
-+	clear_bit(__E1000_DOWN, &adapter->flags);
-+
-+	napi_enable(&adapter->napi);
-+
-+	iegbe_irq_enable(adapter);
-+
-+	netif_start_queue(netdev);
-+
-+	/* fire a link status change interrupt to start the watchdog */
-+
-+    return E1000_SUCCESS;
-+
-+err_req_irq:
-+    iegbe_power_down_phy(adapter);
-+    iegbe_free_all_rx_resources(adapter);
- err_setup_rx:
--	iegbe_reset(adapter);
-+    iegbe_free_all_tx_resources(adapter);
-+err_setup_tx:
-+    iegbe_reset(adapter);
- 
--	return err;
-+    return err;
- }
- 
- /**
-@@ -1348,22 +1249,25 @@ err_setup_rx:
-  * hardware, and all transmit and receive resources are freed.
-  **/
- 
--static int
--iegbe_close(struct net_device *netdev)
-+static int iegbe_close(struct net_device *netdev)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--
--	iegbe_down(adapter);
--
--	iegbe_free_all_tx_resources(adapter);
--	iegbe_free_all_rx_resources(adapter);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_hw *hw = &adapter->hw;
- 
--#ifdef NETIF_F_HW_VLAN_TX
--	if((adapter->hw.mng_cookie.status &
--			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
-+	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
-+    iegbe_down(adapter);
-+	iegbe_power_down_phy(adapter);
-+	iegbe_free_irq(adapter);
-+
-+    iegbe_free_all_tx_resources(adapter);
-+    iegbe_free_all_rx_resources(adapter);
-+
-+	if ((hw->mng_cookie.status &
-+			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-+	     !(adapter->vlgrp &&
-+	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
- 		iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- 	}
--#endif
- 	return 0;
- }
- 
-@@ -1375,19 +1279,19 @@ iegbe_close(struct net_device *netdev)
-  **/
- static inline boolean_t
- iegbe_check_64k_bound(struct iegbe_adapter *adapter,
--		      void *start, unsigned long len)
-+              void *start, unsigned long len)
- {
--	unsigned long begin = (unsigned long) start;
--	unsigned long end = begin + len;
-+    unsigned long begin = (unsigned long) start;
-+    unsigned long end = begin + len;
- 
--	/* First rev 82545 and 82546 need to not allow any memory
--	 * write location to cross 64k boundary due to errata 23 */
--	if(adapter->hw.mac_type == iegbe_82545 ||
--	    adapter->hw.mac_type == iegbe_82546) {
--        return ((begin ^ (end - 1)) >> 0x10) != 0 ? FALSE : TRUE;
--	}
-+    /* First rev 82545 and 82546 need to not allow any memory
-+     * write location to cross 64k boundary due to errata 23 */
-+    if(adapter->hw.mac_type == iegbe_82545 ||
-+        adapter->hw.mac_type == iegbe_82546) {
-+        return ((begin ^ (end - 1)) >> 0x10) != 0x0 ? FALSE : TRUE;
-+    }
- 
--	return TRUE;
-+    return TRUE;
- }
- 
- /**
-@@ -1398,102 +1302,98 @@ iegbe_check_64k_bound(struct iegbe_adapt
-  * Return 0 on success, negative on failure
-  **/
- 
--int
--iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-                          struct iegbe_tx_ring *txdr)
- {
--	struct pci_dev *pdev = adapter->pdev;
--	int size;
-+    struct pci_dev *pdev = adapter->pdev;
-+    int size;
- 
--	size = sizeof(struct iegbe_buffer) * txdr->count;
--	txdr->buffer_info = vmalloc(size);
--	if (!txdr->buffer_info) {
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the transmit descriptor ring\n");
--		return -ENOMEM;
--	}
-+    size = sizeof(struct iegbe_buffer) * txdr->count;
-+    txdr->buffer_info = vmalloc(size);
-+    if (!txdr->buffer_info) {
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the transmit descriptor ring\n");
-+        return -ENOMEM;
-+    }
- 	memset(txdr->buffer_info, 0, size);
--	memset(&txdr->previous_buffer_info, 0, sizeof(struct iegbe_buffer));
- 
--	/* round up to nearest 4K */
-+    /* round up to nearest 4K */
- 
--	txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
--    E1000_ROUNDUP(txdr->size, 0x1000);
-+    txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
-+	txdr->size = ALIGN(txdr->size, 4096);
- 
--	txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
--	if (!txdr->desc) {
-+    txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-+    if (!txdr->desc) {
- setup_tx_desc_die:
--		vfree(txdr->buffer_info);
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the transmit descriptor ring\n");
--		return -ENOMEM;
--	}
--
--	/* Fix for errata 23, can't cross 64kB boundary */
--	if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
--		void *olddesc = txdr->desc;
--		dma_addr_t olddma = txdr->dma;
--		DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
--				     "at %p\n", txdr->size, txdr->desc);
--		/* Try again, without freeing the previous */
--		txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
--		/* Failed allocation, critical failure */
--		if (!txdr->desc) {
--			pci_free_consistent(pdev, txdr->size, olddesc, olddma);
--			goto setup_tx_desc_die;
--		}
-+        vfree(txdr->buffer_info);
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the transmit descriptor ring\n");
-+        return -ENOMEM;
-+    }
-+
-+    /* Fix for errata 23, can't cross 64kB boundary */
-+    if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+        void *olddesc = txdr->desc;
-+        dma_addr_t olddma = txdr->dma;
-+        DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
-+                     "at %p\n", txdr->size, txdr->desc);
-+        /* Try again, without freeing the previous */
-+        txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-+        /* Failed allocation, critical failure */
-+        if (!txdr->desc) {
-+            pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+            goto setup_tx_desc_die;
-+        }
- 
--		if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
--			/* give up */
--			pci_free_consistent(pdev, txdr->size, txdr->desc,
--					    txdr->dma);
--			pci_free_consistent(pdev, txdr->size, olddesc, olddma);
--			DPRINTK(PROBE, ERR,
--				"Unable to allocate aligned memory "
--				"for the transmit descriptor ring\n");
--			vfree(txdr->buffer_info);
--			return -ENOMEM;
--		} else {
--			/* Free old allocation, new allocation was successful */
--			pci_free_consistent(pdev, txdr->size, olddesc, olddma);
--		}
--	}
-+        if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+            /* give up */
-+            pci_free_consistent(pdev, txdr->size, txdr->desc,
-+                        txdr->dma);
-+            pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+            DPRINTK(PROBE, ERR,
-+                "Unable to allocate aligned memory "
-+                "for the transmit descriptor ring\n");
-+            vfree(txdr->buffer_info);
-+            return -ENOMEM;
-+        } else {
-+            /* Free old allocation, new allocation was successful */
-+            pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+        }
-+    }
- 	memset(txdr->desc, 0, txdr->size);
- 
- 	txdr->next_to_use = 0;
- 	txdr->next_to_clean = 0;
--	spin_lock_init(&txdr->tx_lock);
-+    spin_lock_init(&txdr->tx_lock);
- 
- 	return 0;
- }
- 
- /**
-  * iegbe_setup_all_tx_resources - wrapper to allocate Tx resources
-- * 				  (Descriptors) for all queues
-+ *                   (Descriptors) for all queues
-  * @adapter: board private structure
-  *
-- * If this function returns with an error, then it's possible one or
-- * more of the rings is populated (while the rest are not).  It is the
-- * callers duty to clean those orphaned rings.
-- *
-  * Return 0 on success, negative on failure
-  **/
- 
--int
--iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
-+int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
- {
- 	int i, err = 0;
- 
--	for (i = 0; i < adapter->num_queues; i++) {
-+	for (i = 0; i < adapter->num_tx_queues; i++) {
- 		err = iegbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
- 		if (err) {
- 			DPRINTK(PROBE, ERR,
- 				"Allocation for Tx Queue %u failed\n", i);
-+			for (i-- ; i >= 0; i--)
-+				iegbe_free_tx_resources(adapter,
-+							&adapter->tx_ring[i]);
- 			break;
- 		}
- 	}
- 
--	return err;
-+    return err;
- }
- 
- /**
-@@ -1512,113 +1412,108 @@ iegbe_configure_tx(struct iegbe_adapter
- 
- 	/* Setup the HW Tx Head and Tail descriptor pointers */
- 
--	switch (adapter->num_queues) {
-+	switch (adapter->num_tx_queues) {
-     case 0x2:
-         tdba = adapter->tx_ring[0x1].dma;
-         tdlen = adapter->tx_ring[0x1].count *
--			sizeof(struct iegbe_tx_desc);
--		E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
-+            sizeof(struct iegbe_tx_desc);
-+        E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
-         E1000_WRITE_REG(hw, TDBAH1, (tdba >> 0x20));
--		E1000_WRITE_REG(hw, TDLEN1, tdlen);
--		E1000_WRITE_REG(hw, TDH1, 0);
--		E1000_WRITE_REG(hw, TDT1, 0);
-+        E1000_WRITE_REG(hw, TDLEN1, tdlen);
-+        E1000_WRITE_REG(hw, TDH1, 0x0);
-+        E1000_WRITE_REG(hw, TDT1, 0x0);
-         adapter->tx_ring[0x1].tdh = E1000_TDH1;
-         adapter->tx_ring[0x1].tdt = E1000_TDT1;
--		/* Fall Through */
-+        /* Fall Through */
-     case 0x1:
--	default:
--		tdba = adapter->tx_ring[0].dma;
--		tdlen = adapter->tx_ring[0].count *
--			sizeof(struct iegbe_tx_desc);
--		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-+    default:
-+        tdba = adapter->tx_ring[0x0].dma;
-+        tdlen = adapter->tx_ring[0x0].count *
-+            sizeof(struct iegbe_tx_desc);
-+        E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-         E1000_WRITE_REG(hw, TDBAH, (tdba >> 0x20));
--		E1000_WRITE_REG(hw, TDLEN, tdlen);
--		E1000_WRITE_REG(hw, TDH, 0);
--		E1000_WRITE_REG(hw, TDT, 0);
--		adapter->tx_ring[0].tdh = E1000_TDH;
--		adapter->tx_ring[0].tdt = E1000_TDT;
--		break;
--	}
--
--	/* Set the default values for the Tx Inter Packet Gap timer */
--
--	switch (hw->mac_type) {
--	case iegbe_82542_rev2_0:
--	case iegbe_82542_rev2_1:
--		tipg = DEFAULT_82542_TIPG_IPGT;
--		tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
--		tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
--		break;
--	default:
--		switch(hw->media_type) {
--		case iegbe_media_type_fiber:
--		case iegbe_media_type_internal_serdes:
--			tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
--			break;
--		case iegbe_media_type_copper:
--			tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
--			break;
--		case iegbe_media_type_oem:
--		default:
-+        E1000_WRITE_REG(hw, TDLEN, tdlen);
-+        E1000_WRITE_REG(hw, TDH, 0x0);
-+        E1000_WRITE_REG(hw, TDT, 0x0);
-+        adapter->tx_ring[0x0].tdh = E1000_TDH;
-+        adapter->tx_ring[0x0].tdt = E1000_TDT;
-+        break;
-+    }
-+
-+    /* Set the default values for the Tx Inter Packet Gap timer */
-+
-+    switch (hw->mac_type) {
-+    case iegbe_82542_rev2_0:
-+    case iegbe_82542_rev2_1:
-+        tipg = DEFAULT_82542_TIPG_IPGT;
-+        tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-+        tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-+        break;
-+    default:
-+        switch(hw->media_type) {
-+        case iegbe_media_type_fiber:
-+        case iegbe_media_type_internal_serdes:
-+            tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
-+            break;
-+        case iegbe_media_type_copper:
-+            tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-+            break;
-+        case iegbe_media_type_oem:
-+        default:
-             tipg =  (0xFFFFFFFFUL >> (sizeof(tipg)*0x8 -
-                 E1000_TIPG_IPGR1_SHIFT))
--				& iegbe_oem_get_tipg(&adapter->hw);
--			break;
--		}
--		tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
--		tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
--	}
--	E1000_WRITE_REG(hw, TIPG, tipg);
-+                & iegbe_oem_get_tipg(&adapter->hw);
-+            break;
-+        }
-+        tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-+        tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-+    }
-+    E1000_WRITE_REG(hw, TIPG, tipg);
- 
--	/* Set the Tx Interrupt Delay register */
-+    /* Set the Tx Interrupt Delay register */
- 
--	E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
-+    E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
-     if (hw->mac_type >= iegbe_82540) {
--		E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
-+        E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
-     }
--	/* Program the Transmit Control Register */
-+    /* Program the Transmit Control Register */
- 
--	tctl = E1000_READ_REG(hw, TCTL);
-+    tctl = E1000_READ_REG(hw, TCTL);
- 
--	tctl &= ~E1000_TCTL_CT;
--	tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
--		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-+    tctl &= ~E1000_TCTL_CT;
-+    tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
-+        (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
- 
--	E1000_WRITE_REG(hw, TCTL, tctl);
-+    E1000_WRITE_REG(hw, TCTL, tctl);
- 
--	if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
--		tarc = E1000_READ_REG(hw, TARC0);
-+    if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
-+        tarc = E1000_READ_REG(hw, TARC0);
-         tarc |= ((0x1 << 0x19) | (0x1 << 0x15));
--		E1000_WRITE_REG(hw, TARC0, tarc);
--		tarc = E1000_READ_REG(hw, TARC1);
-+        E1000_WRITE_REG(hw, TARC0, tarc);
-+        tarc = E1000_READ_REG(hw, TARC1);
-         tarc |= (0x1 << 0x19);
-         if (tctl & E1000_TCTL_MULR) {
-             tarc &= ~(0x1 << 0x1c);
-         } else {
-             tarc |= (0x1 << 0x1c);
-         }
--		E1000_WRITE_REG(hw, TARC1, tarc);
--	}
-+        E1000_WRITE_REG(hw, TARC1, tarc);
-+    }
- 
--	iegbe_config_collision_dist(hw);
-+    iegbe_config_collision_dist(hw);
- 
--	/* Setup Transmit Descriptor Settings for eop descriptor */
--	adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
--		E1000_TXD_CMD_IFCS;
-+    /* Setup Transmit Descriptor Settings for eop descriptor */
-+    adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
-+        E1000_TXD_CMD_IFCS;
- 
-     if (hw->mac_type < iegbe_82543) {
--		adapter->txd_cmd |= E1000_TXD_CMD_RPS;
-+        adapter->txd_cmd |= E1000_TXD_CMD_RPS;
-     } else {
--#ifdef IEGBE_GBE_WORKAROUND
--        /* Disable the RS bit in the Tx descriptor */
--        adapter->txd_cmd &= ~E1000_TXD_CMD_RS;
--#else
--		adapter->txd_cmd |= E1000_TXD_CMD_RS;
--#endif
-+        adapter->txd_cmd |= E1000_TXD_CMD_RS;
-     }
--	/* Cache if we're 82544 running in PCI-X because we'll
--	 * need this to apply a workaround later in the send path. */
--	if (hw->mac_type == iegbe_82544 &&
-+    /* Cache if we're 82544 running in PCI-X because we'll
-+     * need this to apply a workaround later in the send path. */
-+    if (hw->mac_type == iegbe_82544 &&
-         hw->bus_type == iegbe_bus_type_pcix) {
-         adapter->pcix_82544 = 0x1;
-      }
-@@ -1632,96 +1527,95 @@ iegbe_configure_tx(struct iegbe_adapter
-  * Returns 0 on success, negative on failure
-  **/
- 
--int
--iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-                          struct iegbe_rx_ring *rxdr)
- {
--	struct pci_dev *pdev = adapter->pdev;
--	int size, desc_len;
--
--	size = sizeof(struct iegbe_buffer) * rxdr->count;
--	rxdr->buffer_info = vmalloc(size);
--	if (!rxdr->buffer_info) {
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the receive descriptor ring\n");
--		return -ENOMEM;
--	}
--	memset(rxdr->buffer_info, 0, size);
--
--	size = sizeof(struct iegbe_ps_page) * rxdr->count;
--	rxdr->ps_page = kmalloc(size, GFP_KERNEL);
--	if (!rxdr->ps_page) {
--		vfree(rxdr->buffer_info);
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the receive descriptor ring\n");
--		return -ENOMEM;
--	}
--	memset(rxdr->ps_page, 0, size);
--
--	size = sizeof(struct iegbe_ps_page_dma) * rxdr->count;
--	rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
--	if (!rxdr->ps_page_dma) {
--		vfree(rxdr->buffer_info);
--		kfree(rxdr->ps_page);
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the receive descriptor ring\n");
--		return -ENOMEM;
--	}
--	memset(rxdr->ps_page_dma, 0, size);
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct pci_dev *pdev = adapter->pdev;
-+    int size, desc_len;
- 
--    if (adapter->hw.mac_type <= iegbe_82547_rev_2) {
--		desc_len = sizeof(struct iegbe_rx_desc);
--    } else {
--		desc_len = sizeof(union iegbe_rx_desc_packet_split);
-+    size = sizeof(struct iegbe_buffer) * rxdr->count;
-+    rxdr->buffer_info = vmalloc(size);
-+    if (!rxdr->buffer_info) {
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the receive descriptor ring\n");
-+        return -ENOMEM;
-     }
--	/* Round up to nearest 4K */
--
--	rxdr->size = rxdr->count * desc_len;
--    E1000_ROUNDUP(rxdr->size, 0x1000);
--
--	rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+	memset(rxdr->buffer_info, 0, size);
- 
--	if (!rxdr->desc) {
--		DPRINTK(PROBE, ERR,
--		"Unable to allocate memory for the receive descriptor ring\n");
-+	rxdr->ps_page = kcalloc(rxdr->count, sizeof(struct iegbe_ps_page),
-+	                        GFP_KERNEL);
-+    if (!rxdr->ps_page) {
-+        vfree(rxdr->buffer_info);
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the receive descriptor ring\n");
-+        return -ENOMEM;
-+    }
-+
-+	rxdr->ps_page_dma = kcalloc(rxdr->count,
-+	                            sizeof(struct iegbe_ps_page_dma),
-+	                            GFP_KERNEL);
-+    if (!rxdr->ps_page_dma) {
-+        vfree(rxdr->buffer_info);
-+        kfree(rxdr->ps_page);
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the receive descriptor ring\n");
-+        return -ENOMEM;
-+    }
-+
-+	if (hw->mac_type <= iegbe_82547_rev_2)
-+        desc_len = sizeof(struct iegbe_rx_desc);
-+	else
-+        desc_len = sizeof(union iegbe_rx_desc_packet_split);
-+
-+    /* Round up to nearest 4K */
-+
-+    rxdr->size = rxdr->count * desc_len;
-+	rxdr->size = ALIGN(rxdr->size, 4096);
-+
-+    rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+
-+    if (!rxdr->desc) {
-+        DPRINTK(PROBE, ERR,
-+        "Unable to allocate memory for the receive descriptor ring\n");
- setup_rx_desc_die:
--		vfree(rxdr->buffer_info);
--		kfree(rxdr->ps_page);
--		kfree(rxdr->ps_page_dma);
--		return -ENOMEM;
--	}
--
--	/* Fix for errata 23, can't cross 64kB boundary */
--	if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
--		void *olddesc = rxdr->desc;
--		dma_addr_t olddma = rxdr->dma;
--		DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
--				     "at %p\n", rxdr->size, rxdr->desc);
--		/* Try again, without freeing the previous */
--		rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
--		/* Failed allocation, critical failure */
--		if (!rxdr->desc) {
--			pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
--			DPRINTK(PROBE, ERR,
--				"Unable to allocate memory "
--				"for the receive descriptor ring\n");
--			goto setup_rx_desc_die;
--		}
-+        vfree(rxdr->buffer_info);
-+        kfree(rxdr->ps_page);
-+        kfree(rxdr->ps_page_dma);
-+        return -ENOMEM;
-+    }
-+
-+    /* Fix for errata 23, can't cross 64kB boundary */
-+    if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+        void *olddesc = rxdr->desc;
-+        dma_addr_t olddma = rxdr->dma;
-+        DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
-+                     "at %p\n", rxdr->size, rxdr->desc);
-+        /* Try again, without freeing the previous */
-+        rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+        /* Failed allocation, critical failure */
-+        if (!rxdr->desc) {
-+            pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+            DPRINTK(PROBE, ERR,
-+                "Unable to allocate memory "
-+                "for the receive descriptor ring\n");
-+            goto setup_rx_desc_die;
-+        }
- 
--		if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
--			/* give up */
--			pci_free_consistent(pdev, rxdr->size, rxdr->desc,
--					    rxdr->dma);
--			pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
--			DPRINTK(PROBE, ERR,
--				"Unable to allocate aligned memory "
--				"for the receive descriptor ring\n");
--			goto setup_rx_desc_die;
--		} else {
--			/* Free old allocation, new allocation was successful */
--			pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
--		}
--	}
-+        if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+            /* give up */
-+            pci_free_consistent(pdev, rxdr->size, rxdr->desc,
-+                        rxdr->dma);
-+            pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+            DPRINTK(PROBE, ERR,
-+                "Unable to allocate aligned memory "
-+                "for the receive descriptor ring\n");
-+            goto setup_rx_desc_die;
-+        } else {
-+            /* Free old allocation, new allocation was successful */
-+            pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+        }
-+    }
- 	memset(rxdr->desc, 0, rxdr->size);
- 
- 	rxdr->next_to_clean = 0;
-@@ -1732,7 +1626,7 @@ setup_rx_desc_die:
- 
- /**
-  * iegbe_setup_all_rx_resources - wrapper to allocate Rx resources
-- * 				  (Descriptors) for all queues
-+ *                   (Descriptors) for all queues
-  * @adapter: board private structure
-  *
-  * If this function returns with an error, then it's possible one or
-@@ -1742,21 +1636,23 @@ setup_rx_desc_die:
-  * Return 0 on success, negative on failure
-  **/
- 
--int
--iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
-+int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
- {
- 	int i, err = 0;
- 
--	for (i = 0; i < adapter->num_queues; i++) {
-+	for (i = 0; i < adapter->num_rx_queues; i++) {
- 		err = iegbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
- 		if (err) {
- 			DPRINTK(PROBE, ERR,
- 				"Allocation for Rx Queue %u failed\n", i);
-+			for (i-- ; i >= 0; i--)
-+				iegbe_free_rx_resources(adapter,
-+							&adapter->rx_ring[i]);
- 			break;
- 		}
- 	}
- 
--	return err;
-+    return err;
- }
- 
- /**
-@@ -1765,105 +1661,104 @@ iegbe_setup_all_rx_resources(struct iegb
-  **/
- #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- 			(((S) & (PAGE_SIZE - 1)) ? 1 : 0))
--static void
--iegbe_setup_rctl(struct iegbe_adapter *adapter)
-+static void iegbe_setup_rctl(struct iegbe_adapter *adapter)
- {
--	uint32_t rctl, rfctl;
--	uint32_t psrctl = 0;
--#ifdef CONFIG_E1000_PACKET_SPLIT
--	uint32_t pages = 0;
--#endif
--
--	rctl = E1000_READ_REG(&adapter->hw, RCTL);
--
--    rctl &= ~(0x3 << E1000_RCTL_MO_SHIFT);
--
--	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
--		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
--		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
--
--    if(adapter->hw.tbi_compatibility_on == 0x1) {
--		rctl |= E1000_RCTL_SBP;
--    } else {
--		rctl &= ~E1000_RCTL_SBP;
--    }
--    if(adapter->netdev->mtu <= ETH_DATA_LEN) {
--		rctl &= ~E1000_RCTL_LPE;
--    } else {
--		rctl |= E1000_RCTL_LPE;
--    }
--	/* Setup buffer sizes */
--	if(adapter->hw.mac_type >= iegbe_82571) {
--		/* We can now specify buffers in 1K increments.
--		 * BSIZE and BSEX are ignored in this case. */
--		rctl |= adapter->rx_buffer_len << 0x11;
--	} else {
--		rctl &= ~E1000_RCTL_SZ_4096;
--		rctl |= E1000_RCTL_BSEX;
--		switch (adapter->rx_buffer_len) {
--		case E1000_RXBUFFER_2048:
--		default:
--			rctl |= E1000_RCTL_SZ_2048;
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u32 rctl, rfctl;
-+	u32 psrctl = 0;
-+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
-+	u32 pages = 0;
-+#endif
-+
-+    rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+
-+	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
-+
-+    rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
-+        E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-+		(hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
-+
-+	if (hw->tbi_compatibility_on == 1)
-+        rctl |= E1000_RCTL_SBP;
-+	else
-+        rctl &= ~E1000_RCTL_SBP;
-+
-+	if (adapter->netdev->mtu <= ETH_DATA_LEN)
-+        rctl &= ~E1000_RCTL_LPE;
-+	else
-+        rctl |= E1000_RCTL_LPE;
-+
-+    /* Setup buffer sizes */
-+        /* We can now specify buffers in 1K increments.
-+         * BSIZE and BSEX are ignored in this case. */
-+        rctl &= ~E1000_RCTL_SZ_4096;
-+        rctl |= E1000_RCTL_BSEX;
-+        switch (adapter->rx_buffer_len) {
-+		case E1000_RXBUFFER_256:
-+			rctl |= E1000_RCTL_SZ_256;
- 			rctl &= ~E1000_RCTL_BSEX;
- 			break;
--		case E1000_RXBUFFER_4096:
--			rctl |= E1000_RCTL_SZ_4096;
--			break;
--		case E1000_RXBUFFER_8192:
--			rctl |= E1000_RCTL_SZ_8192;
--			break;
--		case E1000_RXBUFFER_16384:
--			rctl |= E1000_RCTL_SZ_16384;
--			break;
--		}
--	}
-+        case E1000_RXBUFFER_2048:
-+        default:
-+            rctl |= E1000_RCTL_SZ_2048;
-+            rctl &= ~E1000_RCTL_BSEX;
-+            break;
-+        case E1000_RXBUFFER_4096:
-+            rctl |= E1000_RCTL_SZ_4096;
-+            break;
-+        case E1000_RXBUFFER_8192:
-+            rctl |= E1000_RCTL_SZ_8192;
-+            break;
-+        case E1000_RXBUFFER_16384:
-+            rctl |= E1000_RCTL_SZ_16384;
-+            break;
-+        }
- 
--#ifdef CONFIG_E1000_PACKET_SPLIT
--	/* 82571 and greater support packet-split where the protocol
--	 * header is placed in skb->data and the packet data is
--	 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
--	 * In the case of a non-split, skb->data is linearly filled,
--	 * followed by the page buffers.  Therefore, skb->data is
--	 * sized to hold the largest protocol header.
--	 */
--	pages = PAGE_USE_COUNT(adapter->netdev->mtu);
--    if ((adapter->hw.mac_type > iegbe_82547_rev_2) && (pages <= 0x3) &&
--        PAGE_SIZE <= 0x4000) {
--		adapter->rx_ps_pages = pages;
--    } else {
-+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
-+    /* 82571 and greater support packet-split where the protocol
-+     * header is placed in skb->data and the packet data is
-+     * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
-+     * In the case of a non-split, skb->data is linearly filled,
-+     * followed by the page buffers.  Therefore, skb->data is
-+     * sized to hold the largest protocol header.
-+     */
-+    pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-+	if ((hw->mac_type >= iegbe_82571) && (pages <= 3) &&
-+	    PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
-+        adapter->rx_ps_pages = pages;
-+	else
- 		adapter->rx_ps_pages = 0;
--    }
- #endif
--	if (adapter->rx_ps_pages) {
--		/* Configure extra packet-split registers */
--		rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
--		rfctl |= E1000_RFCTL_EXTEN;
--		/* disable IPv6 packet split support */
--		rfctl |= E1000_RFCTL_IPV6_DIS;
--		E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
--
--		rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
--
--		psrctl |= adapter->rx_ps_bsize0 >>
--			E1000_PSRCTL_BSIZE0_SHIFT;
--
--		switch (adapter->rx_ps_pages) {
--        case 0x3:
--			psrctl |= PAGE_SIZE <<
--				E1000_PSRCTL_BSIZE3_SHIFT;
--        case 0x2:
--			psrctl |= PAGE_SIZE <<
--				E1000_PSRCTL_BSIZE2_SHIFT;
--        case 0x1:
--			psrctl |= PAGE_SIZE >>
--				E1000_PSRCTL_BSIZE1_SHIFT;
--			break;
--		}
-+    if (adapter->rx_ps_pages) {
-+        /* Configure extra packet-split registers */
-+        rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
-+        rfctl |= E1000_RFCTL_EXTEN;
-+        /* disable IPv6 packet split support */
-+		rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
-+		          E1000_RFCTL_NEW_IPV6_EXT_DIS);
-+
-+		rctl |= E1000_RCTL_DTYP_PS;
-+
-+        psrctl |= adapter->rx_ps_bsize0 >>
-+            E1000_PSRCTL_BSIZE0_SHIFT;
-+
-+        switch (adapter->rx_ps_pages) {
-+		case 3:
-+            psrctl |= PAGE_SIZE <<
-+                E1000_PSRCTL_BSIZE3_SHIFT;
-+		case 2:
-+            psrctl |= PAGE_SIZE <<
-+                E1000_PSRCTL_BSIZE2_SHIFT;
-+		case 1:
-+            psrctl |= PAGE_SIZE >>
-+                E1000_PSRCTL_BSIZE1_SHIFT;
-+            break;
-+        }
- 
--		E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
--	}
-+        E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
-+    }
- 
--	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+    E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- }
- 
- /**
-@@ -1873,145 +1768,87 @@ iegbe_setup_rctl(struct iegbe_adapter *a
-  * Configure the Rx unit of the MAC after a reset.
-  **/
- 
--static void
--iegbe_configure_rx(struct iegbe_adapter *adapter)
-+static void iegbe_configure_rx(struct iegbe_adapter *adapter)
- {
--	uint64_t rdba;
--	struct iegbe_hw *hw = &adapter->hw;
--	uint32_t rdlen, rctl, rxcsum, ctrl_ext;
--#ifdef CONFIG_E1000_MQ
--	uint32_t reta, mrqc;
--	int i;
--#endif
-+	u64 rdba;
-+    struct iegbe_hw *hw = &adapter->hw;
-+	u32 rdlen, rctl, rxcsum, ctrl_ext;
- 
--	if (adapter->rx_ps_pages) {
-+    if (adapter->rx_ps_pages) {
- 		rdlen = adapter->rx_ring[0].count *
--			sizeof(union iegbe_rx_desc_packet_split);
--		adapter->clean_rx = iegbe_clean_rx_irq_ps;
--		adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
--	} else {
-+            sizeof(union iegbe_rx_desc_packet_split);
-+        adapter->clean_rx = iegbe_clean_rx_irq_ps;
-+        adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
-+    } else {
- 		rdlen = adapter->rx_ring[0].count *
--			sizeof(struct iegbe_rx_desc);
--		adapter->clean_rx = iegbe_clean_rx_irq;
--		adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
--	}
-+            sizeof(struct iegbe_rx_desc);
-+        adapter->clean_rx = iegbe_clean_rx_irq;
-+        adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
-+    }
- 
--	/* disable receives while setting up the descriptors */
--	rctl = E1000_READ_REG(hw, RCTL);
--	E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
-+    /* disable receives while setting up the descriptors */
-+    rctl = E1000_READ_REG(hw, RCTL);
-+    E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
- 
--	/* set the Receive Delay Timer Register */
--	E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
-+    /* set the Receive Delay Timer Register */
-+    E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
- 
--	if (hw->mac_type >= iegbe_82540) {
--		E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
--        if(adapter->itr > 0x1) {
--			E1000_WRITE_REG(hw, ITR,
--                0x3b9aca00 / (adapter->itr * 0x100));
-+    if (hw->mac_type >= iegbe_82540) {
-+        E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
-+		if (adapter->itr_setting != 0)
-+			E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (adapter->itr * 256));
-         }
--	}
- 
--	if (hw->mac_type >= iegbe_82571) {
--		/* Reset delay timers after every interrupt */
--		ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
--		ctrl_ext |= E1000_CTRL_EXT_CANC;
--		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
--		E1000_WRITE_FLUSH(hw);
--	}
-+    if (hw->mac_type >= iegbe_82571) {
-+        /* Reset delay timers after every interrupt */
-+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
-+        ctrl_ext |= E1000_CTRL_EXT_CANC;
-+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-+        E1000_WRITE_FLUSH(hw);
-+    }
- 
- 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
- 	 * the Base and Length of the Rx Descriptor Ring */
--	switch (adapter->num_queues) {
--#ifdef CONFIG_E1000_MQ
--    case 0x2:
--        rdba = adapter->rx_ring[0x1].dma;
--		E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
--        E1000_WRITE_REG(hw, RDBAH1, (rdba >> 0x20));
--		E1000_WRITE_REG(hw, RDLEN1, rdlen);
--		E1000_WRITE_REG(hw, RDH1, 0);
--		E1000_WRITE_REG(hw, RDT1, 0);
--		adapter->rx_ring[1].rdh = E1000_RDH1;
--		adapter->rx_ring[1].rdt = E1000_RDT1;
--		/* Fall Through */
--#endif
--    case 0x1:
--	default:
-+	switch (adapter->num_rx_queues) {
-+	case 1:
-+    default:
- 		rdba = adapter->rx_ring[0].dma;
--		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-+        E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-         E1000_WRITE_REG(hw, RDBAH, (rdba >> 0x20));
--		E1000_WRITE_REG(hw, RDLEN, rdlen);
--		E1000_WRITE_REG(hw, RDH, 0);
--		E1000_WRITE_REG(hw, RDT, 0);
--		adapter->rx_ring[0].rdh = E1000_RDH;
--		adapter->rx_ring[0].rdt = E1000_RDT;
--		break;
--	}
-+        E1000_WRITE_REG(hw, RDLEN, rdlen);
-+		adapter->rx_ring[0].rdh = ((hw->mac_type >= iegbe_82543) ? E1000_RDH : E1000_82542_RDH);
-+		adapter->rx_ring[0].rdt = ((hw->mac_type >= iegbe_82543) ? E1000_RDT : E1000_82542_RDT);
-+        break;
-+    }
- 
--#ifdef CONFIG_E1000_MQ
--    if (adapter->num_queues > 0x1) {
--        uint32_t random[0xa];
--
--        get_random_bytes(&random[0], FORTY);
--
--		if (hw->mac_type <= iegbe_82572) {
--			E1000_WRITE_REG(hw, RSSIR, 0);
--			E1000_WRITE_REG(hw, RSSIM, 0);
--		}
- 
--		switch (adapter->num_queues) {
--        case 0x2:
--		default:
--			reta = 0x00800080;
--			mrqc = E1000_MRQC_ENABLE_RSS_2Q;
--			break;
--		}
--
--		/* Fill out redirection table */
--        for (i = 0; i < 0x20; i++)
--			E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
--		/* Fill out hash function seeds */
--        for (i = 0; i < 0xa; i++)
--			E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
--
--		mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
--			 E1000_MRQC_RSS_FIELD_IPV4_TCP);
--		E1000_WRITE_REG(hw, MRQC, mrqc);
--	}
--
--	/* Multiqueue and packet checksumming are mutually exclusive. */
--	if (hw->mac_type >= iegbe_82571) {
--		rxcsum = E1000_READ_REG(hw, RXCSUM);
--		rxcsum |= E1000_RXCSUM_PCSD;
--		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
--	}
--
--#else
-+    /* Enable 82543 Receive Checksum Offload for TCP and UDP */
-+    if (hw->mac_type >= iegbe_82543) {
-+        rxcsum = E1000_READ_REG(hw, RXCSUM);
-+        if(adapter->rx_csum == TRUE) {
-+            rxcsum |= E1000_RXCSUM_TUOFL;
-+
-+            /* Enable 82571 IPv4 payload checksum for UDP fragments
-+             * Must be used in conjunction with packet-split. */
-+            if ((hw->mac_type >= iegbe_82571) &&
-+               (adapter->rx_ps_pages)) {
-+                rxcsum |= E1000_RXCSUM_IPPCSE;
-+            }
-+        } else {
-+            rxcsum &= ~E1000_RXCSUM_TUOFL;
-+            /* don't need to clear IPPCSE as it defaults to 0 */
-+        }
-+        E1000_WRITE_REG(hw, RXCSUM, rxcsum);
-+    }
- 
--	/* Enable 82543 Receive Checksum Offload for TCP and UDP */
--	if (hw->mac_type >= iegbe_82543) {
--		rxcsum = E1000_READ_REG(hw, RXCSUM);
--		if(adapter->rx_csum == TRUE) {
--			rxcsum |= E1000_RXCSUM_TUOFL;
--
--			/* Enable 82571 IPv4 payload checksum for UDP fragments
--			 * Must be used in conjunction with packet-split. */
--			if ((hw->mac_type >= iegbe_82571) &&
--			   (adapter->rx_ps_pages)) {
--				rxcsum |= E1000_RXCSUM_IPPCSE;
--			}
--		} else {
--			rxcsum &= ~E1000_RXCSUM_TUOFL;
--			/* don't need to clear IPPCSE as it defaults to 0 */
--		}
--		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
--	}
--#endif /* CONFIG_E1000_MQ */
-+	/* enable early receives on 82573, only takes effect if using > 2048
-+	 * byte total frame size.  for example only for jumbo frames */
-+#define E1000_ERT_2048 0x100
-+	if (hw->mac_type == iegbe_82573)
-+		E1000_WRITE_REG(&adapter->hw, ERT, E1000_ERT_2048);
- 
--    if (hw->mac_type == iegbe_82573) {
--		E1000_WRITE_REG(hw, ERT, 0x0100);
--    }
- 	/* Enable Receives */
--	E1000_WRITE_REG(hw, RCTL, rctl);
-+    E1000_WRITE_REG(hw, RCTL, rctl);
- }
- 
- /**
-@@ -2022,20 +1859,19 @@ iegbe_configure_rx(struct iegbe_adapter
-  * Free all transmit software resources
-  **/
- 
--void
--iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-                         struct iegbe_tx_ring *tx_ring)
- {
--	struct pci_dev *pdev = adapter->pdev;
-+    struct pci_dev *pdev = adapter->pdev;
- 
--	iegbe_clean_tx_ring(adapter, tx_ring);
-+    iegbe_clean_tx_ring(adapter, tx_ring);
- 
--	vfree(tx_ring->buffer_info);
--	tx_ring->buffer_info = NULL;
-+    vfree(tx_ring->buffer_info);
-+    tx_ring->buffer_info = NULL;
- 
--	pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
-+    pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
- 
--	tx_ring->desc = NULL;
-+    tx_ring->desc = NULL;
- }
- 
- /**
-@@ -2048,85 +1884,29 @@ iegbe_free_tx_resources(struct iegbe_ada
- void
- iegbe_free_all_tx_resources(struct iegbe_adapter *adapter)
- {
--	int i;
-+    int i;
- 
--	for (i = 0; i < adapter->num_queues; i++)
-+	for (i = 0x0; i < adapter->num_tx_queues; i++)
- 		iegbe_free_tx_resources(adapter, &adapter->tx_ring[i]);
- }
- 
- static inline void
- iegbe_unmap_and_free_tx_resource(struct iegbe_adapter *adapter,
--			struct iegbe_buffer *buffer_info)
--{
--	if(buffer_info->dma) {
--		pci_unmap_page(adapter->pdev,
--				buffer_info->dma,
--				buffer_info->length,
--				PCI_DMA_TODEVICE);
--		buffer_info->dma = 0;
--	}
--	if(buffer_info->skb) {
--		dev_kfree_skb_any(buffer_info->skb);
--		buffer_info->skb = NULL;
--	}
--}
--
--#ifdef IEGBE_GBE_WORKAROUND
--/**
-- * iegbe_clean_tx_ring_partial - Free Tx Buffers without using the DD
-- * bit in the descriptor
-- * @adapter: board private structure
-- * @tx_ring: ring to be cleaned
-- **/
--static void iegbe_clean_tx_ring_partial(struct iegbe_adapter *adapter,
--                                        struct iegbe_tx_ring *tx_ring)
-+            struct iegbe_buffer *buffer_info)
- {
--	struct iegbe_buffer *buffer_info;
--	struct iegbe_tx_desc *tx_desc;
--	struct net_device *netdev = adapter->netdev;
--	unsigned int i;
--	unsigned tail;
--	unsigned head;
--	int cleaned = FALSE;
--
--	tail = readl(adapter->hw.hw_addr + tx_ring->tdt);
--	head = readl(adapter->hw.hw_addr + tx_ring->tdh);
--
--    if (head != tail) {
--	  adapter->stats.tx_hnet++;
--    }
--    if (head != tx_ring->next_to_use) {
--        adapter->stats.tx_hnentu++;
--    }
--    /* Free all the Tx ring sk_buffs from next_to_clean up until
--     *  the current head pointer
--     */
--    i = tx_ring->next_to_clean;
--    while(i != head) {
--        cleaned = TRUE;
--        tx_desc = E1000_TX_DESC(*tx_ring, i);
--
--        buffer_info = &tx_ring->buffer_info[i];
--        iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
--
--        tx_desc->upper.data = 0;
--
--        if (unlikely(++i == tx_ring->count)) { i = 0; }
--
--    }
--    tx_ring->next_to_clean = head;
--
--    spin_lock(&tx_ring->tx_lock);
--
--    /* Wake up the queue if it's currently stopped */
--    if (unlikely(cleaned && netif_queue_stopped(netdev) &&
--                 netif_carrier_ok(netdev))) {
--        netif_wake_queue(netdev);
-+    if(buffer_info->dma) {
-+        pci_unmap_page(adapter->pdev,
-+                buffer_info->dma,
-+                buffer_info->length,
-+                PCI_DMA_TODEVICE);
-+        buffer_info->dma = 0x0;
-+    }
-+    if(buffer_info->skb) {
-+        dev_kfree_skb_any(buffer_info->skb);
-+        buffer_info->skb = NULL;
-     }
--
--    spin_unlock(&tx_ring->tx_lock);
- }
--#endif
-+
- 
- /**
-  * iegbe_clean_tx_ring - Free Tx Buffers
-@@ -2134,38 +1914,34 @@ static void iegbe_clean_tx_ring_partial(
-  * @tx_ring: ring to be cleaned
-  **/
- 
--static void
--iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
-+static void iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
-                     struct iegbe_tx_ring *tx_ring)
- {
--	struct iegbe_buffer *buffer_info;
--	unsigned long size;
--	unsigned int i;
--
--	/* Free all the Tx ring sk_buffs */
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct iegbe_buffer *buffer_info;
-+    unsigned long size;
-+    unsigned int i;
- 
--	if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
--		iegbe_unmap_and_free_tx_resource(adapter,
--				&tx_ring->previous_buffer_info);
--	}
-+    /* Free all the Tx ring sk_buffs */
- 
- 	for (i = 0; i < tx_ring->count; i++) {
--		buffer_info = &tx_ring->buffer_info[i];
--		iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
--	}
-+        buffer_info = &tx_ring->buffer_info[i];
-+        iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
-+    }
- 
--	size = sizeof(struct iegbe_buffer) * tx_ring->count;
-+    size = sizeof(struct iegbe_buffer) * tx_ring->count;
- 	memset(tx_ring->buffer_info, 0, size);
- 
--	/* Zero out the descriptor ring */
-+    /* Zero out the descriptor ring */
- 
- 	memset(tx_ring->desc, 0, tx_ring->size);
- 
- 	tx_ring->next_to_use = 0;
- 	tx_ring->next_to_clean = 0;
-+	tx_ring->last_tx_tso = 0;
- 
--	writel(0, adapter->hw.hw_addr + tx_ring->tdh);
--	writel(0, adapter->hw.hw_addr + tx_ring->tdt);
-+	writel(0, hw->hw_addr + tx_ring->tdh);
-+	writel(0, hw->hw_addr + tx_ring->tdt);
- }
- 
- /**
-@@ -2173,12 +1949,11 @@ iegbe_clean_tx_ring(struct iegbe_adapter
-  * @adapter: board private structure
-  **/
- 
--static void
--iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
-+static void iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
- {
--	int i;
-+    int i;
- 
--	for (i = 0; i < adapter->num_queues; i++)
-+	for (i = 0; i < adapter->num_tx_queues; i++)
- 		iegbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
- }
- 
-@@ -2190,24 +1965,23 @@ iegbe_clean_all_tx_rings(struct iegbe_ad
-  * Free all receive software resources
-  **/
- 
--void
--iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-                         struct iegbe_rx_ring *rx_ring)
- {
--	struct pci_dev *pdev = adapter->pdev;
-+    struct pci_dev *pdev = adapter->pdev;
- 
--	iegbe_clean_rx_ring(adapter, rx_ring);
-+    iegbe_clean_rx_ring(adapter, rx_ring);
- 
--	vfree(rx_ring->buffer_info);
--	rx_ring->buffer_info = NULL;
--	kfree(rx_ring->ps_page);
--	rx_ring->ps_page = NULL;
--	kfree(rx_ring->ps_page_dma);
--	rx_ring->ps_page_dma = NULL;
-+    vfree(rx_ring->buffer_info);
-+    rx_ring->buffer_info = NULL;
-+    kfree(rx_ring->ps_page);
-+    rx_ring->ps_page = NULL;
-+    kfree(rx_ring->ps_page_dma);
-+    rx_ring->ps_page_dma = NULL;
- 
--	pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
-+    pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
- 
--	rx_ring->desc = NULL;
-+    rx_ring->desc = NULL;
- }
- 
- /**
-@@ -2217,12 +1991,11 @@ iegbe_free_rx_resources(struct iegbe_ada
-  * Free all receive software resources
-  **/
- 
--void
--iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
-+void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
- {
--	int i;
-+    int i;
- 
--	for (i = 0; i < adapter->num_queues; i++)
-+	for (i = 0; i < adapter->num_rx_queues; i++)
- 		iegbe_free_rx_resources(adapter, &adapter->rx_ring[i]);
- }
- 
-@@ -2232,60 +2005,59 @@ iegbe_free_all_rx_resources(struct iegbe
-  * @rx_ring: ring to free buffers from
-  **/
- 
--static void
--iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
-+static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
-                     struct iegbe_rx_ring *rx_ring)
- {
--	struct iegbe_buffer *buffer_info;
--	struct iegbe_ps_page *ps_page;
--	struct iegbe_ps_page_dma *ps_page_dma;
--	struct pci_dev *pdev = adapter->pdev;
--	unsigned long size;
--	unsigned int i, j;
--
--	/* Free all the Rx ring sk_buffs */
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct iegbe_buffer *buffer_info;
-+    struct iegbe_ps_page *ps_page;
-+    struct iegbe_ps_page_dma *ps_page_dma;
-+    struct pci_dev *pdev = adapter->pdev;
-+    unsigned long size;
-+    unsigned int i, j;
-+
-+    /* Free all the Rx ring sk_buffs */
-+
-+	for (i = 0; i < rx_ring->count; i++) {
-+        buffer_info = &rx_ring->buffer_info[i];
-+        if(buffer_info->skb) {
-+            pci_unmap_single(pdev,
-+                     buffer_info->dma,
-+                     buffer_info->length,
-+                     PCI_DMA_FROMDEVICE);
- 
--	for(i = 0; i < rx_ring->count; i++) {
--		buffer_info = &rx_ring->buffer_info[i];
--		if(buffer_info->skb) {
--			ps_page = &rx_ring->ps_page[i];
--			ps_page_dma = &rx_ring->ps_page_dma[i];
--			pci_unmap_single(pdev,
--					 buffer_info->dma,
--					 buffer_info->length,
--					 PCI_DMA_FROMDEVICE);
--
--			dev_kfree_skb(buffer_info->skb);
--			buffer_info->skb = NULL;
--
--			for(j = 0; j < adapter->rx_ps_pages; j++) {
--                if(!ps_page->ps_page[j]) { break; }
--				pci_unmap_single(pdev,
--						 ps_page_dma->ps_page_dma[j],
--						 PAGE_SIZE, PCI_DMA_FROMDEVICE);
--				ps_page_dma->ps_page_dma[j] = 0;
--				put_page(ps_page->ps_page[j]);
--				ps_page->ps_page[j] = NULL;
--			}
-+            dev_kfree_skb(buffer_info->skb);
-+            buffer_info->skb = NULL;
- 		}
--	}
-+		ps_page = &rx_ring->ps_page[i];
-+		ps_page_dma = &rx_ring->ps_page_dma[i];
-+		for (j = 0; j < adapter->rx_ps_pages; j++) {
-+			if (!ps_page->ps_page[j]) break;
-+			pci_unmap_page(pdev,
-+                         ps_page_dma->ps_page_dma[j],
-+                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+			ps_page_dma->ps_page_dma[j] = 0;
-+                put_page(ps_page->ps_page[j]);
-+                ps_page->ps_page[j] = NULL;
-+            }
-+        }
- 
--	size = sizeof(struct iegbe_buffer) * rx_ring->count;
-+    size = sizeof(struct iegbe_buffer) * rx_ring->count;
- 	memset(rx_ring->buffer_info, 0, size);
--	size = sizeof(struct iegbe_ps_page) * rx_ring->count;
-+    size = sizeof(struct iegbe_ps_page) * rx_ring->count;
- 	memset(rx_ring->ps_page, 0, size);
--	size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
-+    size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
- 	memset(rx_ring->ps_page_dma, 0, size);
- 
--	/* Zero out the descriptor ring */
-+    /* Zero out the descriptor ring */
- 
- 	memset(rx_ring->desc, 0, rx_ring->size);
- 
- 	rx_ring->next_to_clean = 0;
- 	rx_ring->next_to_use = 0;
- 
--	writel(0, adapter->hw.hw_addr + rx_ring->rdh);
--	writel(0, adapter->hw.hw_addr + rx_ring->rdt);
-+	writel(0, hw->hw_addr + rx_ring->rdh);
-+	writel(0, hw->hw_addr + rx_ring->rdt);
- }
- 
- /**
-@@ -2293,60 +2065,54 @@ iegbe_clean_rx_ring(struct iegbe_adapter
-  * @adapter: board private structure
-  **/
- 
--static void
--iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
-+static void iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
- {
--	int i;
-+    int i;
- 
--	for (i = 0; i < adapter->num_queues; i++)
-+	for (i = 0; i < adapter->num_rx_queues; i++)
- 		iegbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
- }
- 
- /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
-  * and memory write and invalidate disabled for certain operations
-  */
--static void
--iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
-+static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
- {
--	struct net_device *netdev = adapter->netdev;
--	uint32_t rctl;
-+    struct net_device *netdev = adapter->netdev;
-+    uint32_t rctl;
- 
--	iegbe_pci_clear_mwi(&adapter->hw);
-+    iegbe_pci_clear_mwi(&adapter->hw);
- 
--	rctl = E1000_READ_REG(&adapter->hw, RCTL);
--	rctl |= E1000_RCTL_RST;
--	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
--	E1000_WRITE_FLUSH(&adapter->hw);
-+    rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+    rctl |= E1000_RCTL_RST;
-+    E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+    E1000_WRITE_FLUSH(&adapter->hw);
-     mdelay(0x5);
- 
-     if(netif_running(netdev)) {
--		iegbe_clean_all_rx_rings(adapter);
--}
-+        iegbe_clean_all_rx_rings(adapter);
-+    }
- }
- 
- static void
- iegbe_leave_82542_rst(struct iegbe_adapter *adapter)
- {
--	struct net_device *netdev = adapter->netdev;
--	uint32_t rctl;
-+    struct net_device *netdev = adapter->netdev;
-+    uint32_t rctl;
- 
--	rctl = E1000_READ_REG(&adapter->hw, RCTL);
--	rctl &= ~E1000_RCTL_RST;
--	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
--	E1000_WRITE_FLUSH(&adapter->hw);
-+    rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+    rctl &= ~E1000_RCTL_RST;
-+    E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+    E1000_WRITE_FLUSH(&adapter->hw);
-     mdelay(0x5);
- 
-     if(adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE) {
--		iegbe_pci_set_mwi(&adapter->hw);
-+        iegbe_pci_set_mwi(&adapter->hw);
-     }
- 	if(netif_running(netdev)) {
-+		struct iegbe_rx_ring *ring = &adapter->rx_ring[0x0];
- 		iegbe_configure_rx(adapter);
--#ifdef IEGBE_GBE_WORKAROUND
--		iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0],
--                               IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
--#else
--		iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0]);
--#endif
-+		adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
- 	}
- }
- 
-@@ -2358,133 +2124,153 @@ iegbe_leave_82542_rst(struct iegbe_adapt
-  * Returns 0 on success, negative on failure
-  **/
- 
--static int
--iegbe_set_mac(struct net_device *netdev, void *p)
-+static int iegbe_set_mac(struct net_device *netdev, void *p)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	struct sockaddr *addr = p;
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    struct sockaddr *addr = p;
- 
-     if(!is_valid_ether_addr(addr->sa_data)) {
--		return -EADDRNOTAVAIL;
-+        return -EADDRNOTAVAIL;
-     }
--	/* 82542 2.0 needs to be in reset to write receive address registers */
-+    /* 82542 2.0 needs to be in reset to write receive address registers */
- 
-     if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
--		iegbe_enter_82542_rst(adapter);
-+        iegbe_enter_82542_rst(adapter);
-     }
--	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
--	memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
-+    memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-+    memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
- 
--	iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
-+    iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
- 
--	/* With 82571 controllers, LAA may be overwritten (with the default)
--	 * due to controller reset from the other port. */
--	if (adapter->hw.mac_type == iegbe_82571) {
--		/* activate the work around */
-+    /* With 82571 controllers, LAA may be overwritten (with the default)
-+     * due to controller reset from the other port. */
-+    if (adapter->hw.mac_type == iegbe_82571) {
-+        /* activate the work around */
-         adapter->hw.laa_is_present = 0x1;
- 
--		/* Hold a copy of the LAA in RAR[14] This is done so that
--		 * between the time RAR[0] gets clobbered  and the time it
--		 * gets fixed (in iegbe_watchdog), the actual LAA is in one
--		 * of the RARs and no incoming packets directed to this port
--		 * are dropped. Eventaully the LAA will be in RAR[0] and
--		 * RAR[14] */
--		iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
-+        /* Hold a copy of the LAA in RAR[14] This is done so that
-+         * between the time RAR[0] gets clobbered  and the time it
-+         * gets fixed (in iegbe_watchdog), the actual LAA is in one
-+         * of the RARs and no incoming packets directed to this port
-+         * are dropped. Eventaully the LAA will be in RAR[0] and
-+         * RAR[14] */
-+        iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
-                     E1000_RAR_ENTRIES - 0x1);
--	}
-+    }
- 
-     if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
--		iegbe_leave_82542_rst(adapter);
-+        iegbe_leave_82542_rst(adapter);
-     }
--	return 0;
-+    return 0x0;
- }
- 
- /**
-- * iegbe_set_multi - Multicast and Promiscuous mode set
-+ * iegbe_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
-  * @netdev: network interface device structure
-  *
-- * The set_multi entry point is called whenever the multicast address
-- * list or the network interface flags are updated.  This routine is
-- * responsible for configuring the hardware for proper multicast,
-+ * The set_rx_mode entry point is called whenever the unicast or multicast
-+ * address lists or the network interface flags are updated. This routine is
-+ * responsible for configuring the hardware for proper unicast, multicast,
-  * promiscuous mode, and all-multi behavior.
-  **/
- 
--static void
--iegbe_set_multi(struct net_device *netdev)
-+static void iegbe_set_rx_mode(struct net_device *netdev)
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
- 	struct iegbe_hw *hw = &adapter->hw;
--	struct dev_mc_list *mc_ptr;
--	uint32_t rctl;
--	uint32_t hash_value;
-+	struct dev_addr_list *uc_ptr;
-+	struct dev_addr_list *mc_ptr;
-+	u32 rctl;
-+	u32 hash_value;
- 	int i, rar_entries = E1000_RAR_ENTRIES;
-+int mta_reg_count = E1000_NUM_MTA_REGISTERS;
- 
- 	/* reserve RAR[14] for LAA over-write work-around */
--    if (adapter->hw.mac_type == iegbe_82571) {
-+	if (hw->mac_type == iegbe_82571)
- 		rar_entries--;
--    }
-+
- 	/* Check for Promiscuous and All Multicast modes */
- 
--	rctl = E1000_READ_REG(hw, RCTL);
-+	rctl = E1000_READ_REG(&adapter->hw, RCTL);
- 
- 	if (netdev->flags & IFF_PROMISC) {
- 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
--	} else if (netdev->flags & IFF_ALLMULTI) {
--		rctl |= E1000_RCTL_MPE;
--		rctl &= ~E1000_RCTL_UPE;
-+		rctl &= ~E1000_RCTL_VFE;
- 	} else {
--		rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
-+		if (netdev->flags & IFF_ALLMULTI) {
-+			rctl |= E1000_RCTL_MPE;
-+		} else {
-+			rctl &= ~E1000_RCTL_MPE;
-+		}
-+	}
-+
-+	uc_ptr = NULL;
-+	if (netdev->uc_count > rar_entries - 1) {
-+		rctl |= E1000_RCTL_UPE;
-+	} else if (!(netdev->flags & IFF_PROMISC)) {
-+		rctl &= ~E1000_RCTL_UPE;
-+		uc_ptr = netdev->uc_list;
- 	}
- 
--	E1000_WRITE_REG(hw, RCTL, rctl);
-+	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- 
- 	/* 82542 2.0 needs to be in reset to write receive address registers */
- 
--    if (hw->mac_type == iegbe_82542_rev2_0) {
-+	if (hw->mac_type == iegbe_82542_rev2_0)
- 		iegbe_enter_82542_rst(adapter);
--    }
--	/* load the first 14 multicast address into the exact filters 1-14
-+
-+	/* load the first 14 addresses into the exact filters 1-14. Unicast
-+	 * addresses take precedence to avoid disabling unicast filtering
-+	 * when possible.
-+	 *
- 	 * RAR 0 is used for the station MAC adddress
- 	 * if there are not 14 addresses, go ahead and clear the filters
- 	 * -- with 82571 controllers only 0-13 entries are filled here
- 	 */
- 	mc_ptr = netdev->mc_list;
- 
--    for (i = 0x1; i < rar_entries; i++) {
--		if (mc_ptr) {
--			iegbe_rar_set(hw, mc_ptr->dmi_addr, i);
-+	for (i = 1; i < rar_entries; i++) {
-+		if (uc_ptr) {
-+			iegbe_rar_set(hw, uc_ptr->da_addr, i);
-+			uc_ptr = uc_ptr->next;
-+		} else if (mc_ptr) {		
-+			iegbe_rar_set(hw, mc_ptr->da_addr, i);
- 			mc_ptr = mc_ptr->next;
- 		} else {
--            E1000_WRITE_REG_ARRAY(hw, RA, i << 0x1, 0);
--            E1000_WRITE_REG_ARRAY(hw, RA, (i << 0x1) + 0x1, 0);
-+			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
-+			E1000_WRITE_FLUSH(&adapter->hw);
-+			E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
-+			E1000_WRITE_FLUSH(&adapter->hw);
- 		}
- 	}
-+	WARN_ON(uc_ptr != NULL);
- 
- 	/* clear the old settings from the multicast hash table */
- 
--	for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
-+	for (i = 0; i < mta_reg_count; i++) {
- 		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
-+		E1000_WRITE_FLUSH(&adapter->hw);
-+	}
- 
- 	/* load any remaining addresses into the hash table */
- 
- 	for (; mc_ptr; mc_ptr = mc_ptr->next) {
--		hash_value = iegbe_hash_mc_addr(hw, mc_ptr->dmi_addr);
-+		hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
- 		iegbe_mta_set(hw, hash_value);
- 	}
- 
--    if (hw->mac_type == iegbe_82542_rev2_0) {
-+	if (hw->mac_type == iegbe_82542_rev2_0)
- 		iegbe_leave_82542_rst(adapter);
- }
--}
- 
- /* Need to wait a few seconds after link up to get diagnostic information from
-  * the phy */
- 
--static void
--iegbe_update_phy_info(unsigned long data)
-+static void iegbe_update_phy_info(unsigned long data)
- {
--	struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
--	iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
-+    struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+	struct iegbe_hw *hw = &adapter->hw;
-+	iegbe_phy_get_info(hw, &adapter->phy_info);
- }
- 
- /**
-@@ -2492,54 +2278,54 @@ iegbe_update_phy_info(unsigned long data
-  * @data: pointer to adapter cast into an unsigned long
-  **/
- 
--static void
--iegbe_82547_tx_fifo_stall(unsigned long data)
-+static void iegbe_82547_tx_fifo_stall(unsigned long data)
- {
--	struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
--	struct net_device *netdev = adapter->netdev;
--	uint32_t tctl;
-+    struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+    struct net_device *netdev = adapter->netdev;
-+	u32 tctl;
- 
--	if(atomic_read(&adapter->tx_fifo_stall)) {
--		if((E1000_READ_REG(&adapter->hw, TDT) ==
--		    E1000_READ_REG(&adapter->hw, TDH)) &&
--		   (E1000_READ_REG(&adapter->hw, TDFT) ==
--		    E1000_READ_REG(&adapter->hw, TDFH)) &&
--		   (E1000_READ_REG(&adapter->hw, TDFTS) ==
--		    E1000_READ_REG(&adapter->hw, TDFHS))) {
--			tctl = E1000_READ_REG(&adapter->hw, TCTL);
--			E1000_WRITE_REG(&adapter->hw, TCTL,
--					tctl & ~E1000_TCTL_EN);
--			E1000_WRITE_REG(&adapter->hw, TDFT,
--					adapter->tx_head_addr);
--			E1000_WRITE_REG(&adapter->hw, TDFH,
--					adapter->tx_head_addr);
--			E1000_WRITE_REG(&adapter->hw, TDFTS,
--					adapter->tx_head_addr);
--			E1000_WRITE_REG(&adapter->hw, TDFHS,
--					adapter->tx_head_addr);
--			E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
--			E1000_WRITE_FLUSH(&adapter->hw);
--
--			adapter->tx_fifo_head = 0;
--			atomic_set(&adapter->tx_fifo_stall, 0);
--			netif_wake_queue(netdev);
--		} else {
-+    if(atomic_read(&adapter->tx_fifo_stall)) {
-+        if((E1000_READ_REG(&adapter->hw, TDT) ==
-+            E1000_READ_REG(&adapter->hw, TDH)) &&
-+           (E1000_READ_REG(&adapter->hw, TDFT) ==
-+            E1000_READ_REG(&adapter->hw, TDFH)) &&
-+           (E1000_READ_REG(&adapter->hw, TDFTS) ==
-+            E1000_READ_REG(&adapter->hw, TDFHS))) {
-+            tctl = E1000_READ_REG(&adapter->hw, TCTL);
-+            E1000_WRITE_REG(&adapter->hw, TCTL,
-+                    tctl & ~E1000_TCTL_EN);
-+            E1000_WRITE_REG(&adapter->hw, TDFT,
-+                    adapter->tx_head_addr);
-+            E1000_WRITE_REG(&adapter->hw, TDFH,
-+                    adapter->tx_head_addr);
-+            E1000_WRITE_REG(&adapter->hw, TDFTS,
-+                    adapter->tx_head_addr);
-+            E1000_WRITE_REG(&adapter->hw, TDFHS,
-+                    adapter->tx_head_addr);
-+            E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-+            E1000_WRITE_FLUSH(&adapter->hw);
-+
-+            adapter->tx_fifo_head = 0x0;
-+            atomic_set(&adapter->tx_fifo_stall, 0x0);
-+            netif_wake_queue(netdev);
-+        } else {
-             mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 0x1);
--		}
--	}
-+        }
-+    }
- }
- 
-+
- /**
-  * iegbe_watchdog - Timer Call-back
-  * @data: pointer to adapter cast into an unsigned long
-  **/
--static void
--iegbe_watchdog(unsigned long data)
-+static void iegbe_watchdog(unsigned long data)
- {
--	struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
--	struct net_device *netdev = adapter->netdev;
--	struct iegbe_tx_ring *txdr = &adapter->tx_ring[0];
--	uint32_t link;
-+    struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+	struct iegbe_tx_ring *txdr = adapter->tx_ring;
-+	u32 link, tctl;
- 
-    /*
-     * Test the PHY for link status on icp_xxxx MACs.
-@@ -2547,123 +2333,305 @@ iegbe_watchdog(unsigned long data)
-     * in the adapter->hw structure, then set hw->get_link_status = 1
-     */
-     if(adapter->hw.mac_type == iegbe_icp_xxxx) {
--        int isUp = 0;
-+        int isUp = 0x0;
-         int32_t ret_val;
- 
-         ret_val = iegbe_oem_phy_is_link_up(&adapter->hw, &isUp);
-         if(ret_val != E1000_SUCCESS) {
--            isUp = 0;
--    }
-+            isUp = 0x0;
-+        }
-         if(isUp != adapter->hw.icp_xxxx_is_link_up) {
-             adapter->hw.get_link_status = 0x1;
-         }
-     }
- 
--	iegbe_check_for_link(&adapter->hw);
--	if (adapter->hw.mac_type == iegbe_82573) {
--		iegbe_enable_tx_pkt_filtering(&adapter->hw);
-+    iegbe_check_for_link(&adapter->hw);
-+    if (adapter->hw.mac_type == iegbe_82573) {
-+        iegbe_enable_tx_pkt_filtering(&adapter->hw);
- #ifdef NETIF_F_HW_VLAN_TX
-         if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) {
--			iegbe_update_mng_vlan(adapter);
-+            iegbe_update_mng_vlan(adapter);
-         }
- #endif
--	}
-+    }
- 
--	if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
--	   !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
--		link = !adapter->hw.serdes_link_down;
--	} else {
-+    if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
-+       !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
-+        link = !adapter->hw.serdes_link_down;
-+    } else {
- 
--		if(adapter->hw.mac_type != iegbe_icp_xxxx) {
--			link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
--		} else {
--			int isUp = 0;
-+        if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-+            link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
-+        } else {
-+            int isUp = 0x0;
-             if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
--				isUp = 0;
-+                isUp = 0x0;
-                 }
--			link = isUp;
--		}
--	}
-+            link = isUp;
-+        }
-+    }
- 
--	if (link) {
--		if (!netif_carrier_ok(netdev)) {
--			iegbe_get_speed_and_duplex(&adapter->hw,
--			                           &adapter->link_speed,
--			                           &adapter->link_duplex);
--
--			DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
--			       adapter->link_speed,
--			       adapter->link_duplex == FULL_DUPLEX ?
--			       "Full Duplex" : "Half Duplex");
-+    if (link) {
-+        if (!netif_carrier_ok(netdev)) {
-+			u32 ctrl;
-+			bool txb2b = true;
-+			iegbe_get_speed_and_duplex(hw,
-+                                       &adapter->link_speed,
-+                                       &adapter->link_duplex);
- 
--			netif_carrier_on(netdev);
--			netif_wake_queue(netdev);
--            mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
-+			ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+			DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
-+			        "Flow Control: %s\n",
-+                   adapter->link_speed,
-+                   adapter->link_duplex == FULL_DUPLEX ?
-+			        "Full Duplex" : "Half Duplex",
-+			        ((ctrl & E1000_CTRL_TFCE) && (ctrl &
-+			        E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
-+			        E1000_CTRL_RFCE) ? "RX" : ((ctrl &
-+			        E1000_CTRL_TFCE) ? "TX" : "None" )));
-+
-+			/* tweak tx_queue_len according to speed/duplex
-+			 * and adjust the timeout factor */
-+			netdev->tx_queue_len = adapter->tx_queue_len;
-+			adapter->tx_timeout_factor = 1;
-+			switch (adapter->link_speed) {
-+			case SPEED_10:
-+				txb2b = false;
-+				netdev->tx_queue_len = 10;
-+				adapter->tx_timeout_factor = 8;
-+				break;
-+			case SPEED_100:
-+				txb2b = false;
-+				netdev->tx_queue_len = 100;
-+				break;
-+			}
-+			if ((hw->mac_type == iegbe_82571 ||
-+			     hw->mac_type == iegbe_82572) &&
-+			    !txb2b) {
-+				u32 tarc0;
-+				tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
-+				tarc0 &= ~(1 << 21);
-+				E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
-+			}
-+			/* disable TSO for pcie and 10/100 speeds, to avoid
-+			 * some hardware issues */
-+			if (!adapter->tso_force &&
-+			    hw->bus_type == iegbe_bus_type_pci_express){
-+				switch (adapter->link_speed) {
-+				case SPEED_10:
-+				case SPEED_100:
-+					DPRINTK(PROBE,INFO,
-+				        "10/100 speed: disabling TSO\n");
-+					netdev->features &= ~NETIF_F_TSO;
-+					netdev->features &= ~NETIF_F_TSO6;
-+					break;
-+				case SPEED_1000:
-+					netdev->features |= NETIF_F_TSO;
-+					netdev->features |= NETIF_F_TSO6;
-+					break;
-+				default:
-+					break;
-+				}
-+			}
-+			tctl = E1000_READ_REG(&adapter->hw, TCTL);
-+			tctl |= E1000_TCTL_EN;
-+			E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-+            netif_carrier_on(netdev);
-+            netif_wake_queue(netdev);
-+			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
- 			adapter->smartspeed = 0;
-+		} else {
-+			if (hw->rx_needs_kicking) {
-+				u32 rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+				E1000_WRITE_REG(&adapter->hw, RCTL, rctl | E1000_RCTL_EN);
-+        }
- 		}
--	} else {
--		if (netif_carrier_ok(netdev)) {
-+    } else {
-+        if (netif_carrier_ok(netdev)) {
- 			adapter->link_speed = 0;
- 			adapter->link_duplex = 0;
--			DPRINTK(LINK, INFO, "NIC Link is Down\n");
--			netif_carrier_off(netdev);
--			netif_stop_queue(netdev);
--            mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
--		}
-+            DPRINTK(LINK, INFO, "NIC Link is Down\n");
-+            netif_carrier_off(netdev);
-+            netif_stop_queue(netdev);
-+			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
-+        }
- 
--		iegbe_smartspeed(adapter);
--	}
-+        iegbe_smartspeed(adapter);
-+    }
-+
-+    iegbe_update_stats(adapter);
-+
-+	hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
-+    adapter->tpt_old = adapter->stats.tpt;
-+	hw->collision_delta = adapter->stats.colc - adapter->colc_old;
-+    adapter->colc_old = adapter->stats.colc;
-+
-+    adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
-+    adapter->gorcl_old = adapter->stats.gorcl;
-+    adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
-+    adapter->gotcl_old = adapter->stats.gotcl;
-+
-+	iegbe_update_adaptive(hw);
-+
-+	if (!netif_carrier_ok(netdev)) {
-+		if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
-+            /* We've lost link, so the controller stops DMA,
-+             * but we've got queued Tx work that's never going
-+             * to get done, so reset controller to flush Tx.
-+             * (Do the reset outside of interrupt context). */
-+			adapter->tx_timeout_count++;
-+			schedule_work(&adapter->reset_task);
-+        }
-+    }
-+
-+    /* Cause software interrupt to ensure rx ring is cleaned */
-+    E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
-+
-+    /* Force detection of hung controller every watchdog period */
-+    adapter->detect_tx_hung = TRUE;
-+
-+    /* With 82571 controllers, LAA may be overwritten due to controller
-+     * reset from the other port. Set the appropriate LAA in RAR[0] */
-+    if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
-+        iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
-+    }
-+    /* Reset the timer */
-+	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
-+}
-+
-+enum latency_range {
-+	lowest_latency = 0,
-+	low_latency = 1,
-+	bulk_latency = 2,
-+	latency_invalid = 255
-+};
- 
--	iegbe_update_stats(adapter);
-+/**
-+ * iegbe_update_itr - update the dynamic ITR value based on statistics
-+ *      Stores a new ITR value based on packets and byte
-+ *      counts during the last interrupt.  The advantage of per interrupt
-+ *      computation is faster updates and more accurate ITR for the current
-+ *      traffic pattern.  Constants in this function were computed
-+ *      based on theoretical maximum wire speed and thresholds were set based
-+ *      on testing data as well as attempting to minimize response time
-+ *      while increasing bulk throughput.
-+ *      this functionality is controlled by the InterruptThrottleRate module
-+ *      parameter (see iegbe_param.c)
-+ * @adapter: pointer to adapter
-+ * @itr_setting: current adapter->itr
-+ * @packets: the number of packets during this measurement interval
-+ * @bytes: the number of bytes during this measurement interval
-+ **/
-+static unsigned int iegbe_update_itr(struct iegbe_adapter *adapter,
-+				     u16 itr_setting, int packets, int bytes)
-+{
-+	unsigned int retval = itr_setting;
-+	struct iegbe_hw *hw = &adapter->hw;
- 
--	adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
--	adapter->tpt_old = adapter->stats.tpt;
--	adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
--	adapter->colc_old = adapter->stats.colc;
--
--	adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
--	adapter->gorcl_old = adapter->stats.gorcl;
--	adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
--	adapter->gotcl_old = adapter->stats.gotcl;
--
--	iegbe_update_adaptive(&adapter->hw);
--
--    if (adapter->num_queues == 0x1 && !netif_carrier_ok(netdev)) {
--        if (E1000_DESC_UNUSED(txdr) + 0x1 < txdr->count) {
--			/* We've lost link, so the controller stops DMA,
--			 * but we've got queued Tx work that's never going
--			 * to get done, so reset controller to flush Tx.
--			 * (Do the reset outside of interrupt context). */
--			schedule_work(&adapter->tx_timeout_task);
-+	if (unlikely(hw->mac_type < iegbe_82540))
-+		goto update_itr_done;
-+
-+	if (packets == 0)
-+		goto update_itr_done;
-+
-+	switch (itr_setting) {
-+	case lowest_latency:
-+		/* jumbo frames get bulk treatment*/
-+		if (bytes/packets > 8000)
-+			retval = bulk_latency;
-+		else if ((packets < 5) && (bytes > 512))
-+			retval = low_latency;
-+		break;
-+	case low_latency:  /* 50 usec aka 20000 ints/s */
-+		if (bytes > 10000) {
-+			/* jumbo frames need bulk latency setting */
-+			if (bytes/packets > 8000)
-+				retval = bulk_latency;
-+			else if ((packets < 10) || ((bytes/packets) > 1200))
-+				retval = bulk_latency;
-+			else if ((packets > 35))
-+				retval = lowest_latency;
-+		} else if (bytes/packets > 2000)
-+			retval = bulk_latency;
-+		else if (packets <= 2 && bytes < 512)
-+			retval = lowest_latency;
-+		break;
-+	case bulk_latency: /* 250 usec aka 4000 ints/s */
-+		if (bytes > 25000) {
-+			if (packets > 35)
-+				retval = low_latency;
-+		} else if (bytes < 6000) {
-+			retval = low_latency;
- 		}
-+		break;
- 	}
- 
--	/* Dynamic mode for Interrupt Throttle Rate (ITR) */
--    if (adapter->hw.mac_type >= iegbe_82540 && adapter->itr == 0x1) {
--		/* Symmetric Tx/Rx gets a reduced ITR=2000; Total
--		 * asymmetrical Tx or Rx gets ITR=8000; everyone
--		 * else is between 2000-8000. */
--        uint32_t goc = (adapter->gotcl + adapter->gorcl) / 0x2710;
--		uint32_t dif = (adapter->gotcl > adapter->gorcl ?
--			adapter->gotcl - adapter->gorcl :
--            adapter->gorcl - adapter->gotcl) / 0x2710;
--        uint32_t itr = goc > 0 ? (dif * 0x1770 / goc + 0x7d0) : 0x1f40;
--        E1000_WRITE_REG(&adapter->hw, ITR, 0x3b9aca00 / (itr * 0x100));
--	}
-+update_itr_done:
-+	return retval;
-+}
- 
--	/* Cause software interrupt to ensure rx ring is cleaned */
--	E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
-+static void iegbe_set_itr(struct iegbe_adapter *adapter)
-+{
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u16 current_itr;
-+	u32 new_itr = adapter->itr;
- 
--	/* Force detection of hung controller every watchdog period */
--	adapter->detect_tx_hung = TRUE;
-+	if (unlikely(hw->mac_type < iegbe_82540))
-+		return;
- 
--	/* With 82571 controllers, LAA may be overwritten due to controller
--	 * reset from the other port. Set the appropriate LAA in RAR[0] */
--    if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
--		iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
--    }
--	/* Reset the timer */
--      mod_timer(&adapter->watchdog_timer, jiffies + 0x2 * HZ);
-+	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
-+	if (unlikely(adapter->link_speed != SPEED_1000)) {
-+		current_itr = 0;
-+		new_itr = 4000;
-+		goto set_itr_now;
-+	}
-+
-+	adapter->tx_itr = iegbe_update_itr(adapter,
-+	                            adapter->tx_itr,
-+	                            adapter->total_tx_packets,
-+	                            adapter->total_tx_bytes);
-+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
-+	if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
-+		adapter->tx_itr = low_latency;
-+
-+	adapter->rx_itr = iegbe_update_itr(adapter,
-+	                            adapter->rx_itr,
-+	                            adapter->total_rx_packets,
-+	                            adapter->total_rx_bytes);
-+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
-+	if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
-+		adapter->rx_itr = low_latency;
-+
-+	current_itr = max(adapter->rx_itr, adapter->tx_itr);
-+
-+	switch (current_itr) {
-+	/* counts and packets in update_itr are dependent on these numbers */
-+	case lowest_latency:
-+		new_itr = 70000;
-+		break;
-+	case low_latency:
-+		new_itr = 20000; /* aka hwitr = ~200 */
-+		break;
-+	case bulk_latency:
-+		new_itr = 4000;
-+		break;
-+	default:
-+		break;
-+	}
-+
-+set_itr_now:
-+	if (new_itr != adapter->itr) {
-+		/* this attempts to bias the interrupt rate towards Bulk
-+		 * by adding intermediate steps when interrupt rate is
-+		 * increasing */
-+		new_itr = new_itr > adapter->itr ?
-+		             min(adapter->itr + (new_itr >> 2), new_itr) :
-+		             new_itr;
-+		adapter->itr = new_itr;
-+		E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (new_itr * 256));
-+	}
-+
-+	return;
- }
- 
- #define E1000_TX_FLAGS_CSUM		0x00000001
-@@ -2673,55 +2641,48 @@ iegbe_watchdog(unsigned long data)
- #define E1000_TX_FLAGS_VLAN_MASK	0xffff0000
- #define E1000_TX_FLAGS_VLAN_SHIFT	16
- 
--static inline int
--iegbe_tso(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
--          struct sk_buff *skb)
-+static int iegbe_tso(struct iegbe_adapter *adapter,
-+		     struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
- {
--#ifdef NETIF_F_TSO
- 	struct iegbe_context_desc *context_desc;
-+	struct iegbe_buffer *buffer_info;
- 	unsigned int i;
--	uint32_t cmd_length = 0;
--	uint16_t ipcse = 0, tucse, mss;
--	uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
-+	u32 cmd_length = 0;
-+	u16 ipcse = 0, tucse, mss;
-+	u8 ipcss, ipcso, tucss, tucso, hdr_len;
- 	int err;
- 
- 	if (skb_is_gso(skb)) {
- 		if (skb_header_cloned(skb)) {
- 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
--            if (err) {
-+			if (err)
- 				return err;
- 		}
--        }
- 
--        hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
-+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- 		mss = skb_shinfo(skb)->gso_size;
- 		if (skb->protocol == htons(ETH_P_IP)) {
--			skb->nh.iph->tot_len = 0;
--			skb->nh.iph->check = 0;
--			skb->h.th->check =
--				~csum_tcpudp_magic(skb->nh.iph->saddr,
--						   skb->nh.iph->daddr,
--						   0,
--						   IPPROTO_TCP,
--						   0);
-+			struct iphdr *iph = ip_hdr(skb);
-+			iph->tot_len = 0;
-+			iph->check = 0;
-+			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-+								 iph->daddr, 0,
-+								 IPPROTO_TCP,
-+								 0);
- 			cmd_length = E1000_TXD_CMD_IP;
--            ipcse = skb->h.raw - skb->data - 0x1;
--#ifdef NETIF_F_TSO_IPV6
--		} else if (skb->protocol == ntohs(ETH_P_IPV6)) {
--			skb->nh.ipv6h->payload_len = 0;
--			skb->h.th->check =
--				~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
--						 &skb->nh.ipv6h->daddr,
--						 0,
--						 IPPROTO_TCP,
--						 0);
-+			ipcse = skb_transport_offset(skb) - 1;
-+		} else if (skb->protocol == htons(ETH_P_IPV6)) {
-+			ipv6_hdr(skb)->payload_len = 0;
-+			tcp_hdr(skb)->check =
-+				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-+						 &ipv6_hdr(skb)->daddr,
-+						 0, IPPROTO_TCP, 0);
- 			ipcse = 0;
--#endif
- 		}
--		ipcss = skb->nh.raw - skb->data;
--		ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
--		tucss = skb->h.raw - skb->data;
--		tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
-+		ipcss = skb_network_offset(skb);
-+		ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
-+		tucss = skb_transport_offset(skb);
-+		tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- 		tucse = 0;
- 
- 		cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
-@@ -2729,6 +2690,7 @@ iegbe_tso(struct iegbe_adapter *adapter,
- 
- 		i = tx_ring->next_to_use;
- 		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-+		buffer_info = &tx_ring->buffer_info[i];
- 
- 		context_desc->lower_setup.ip_fields.ipcss  = ipcss;
- 		context_desc->lower_setup.ip_fields.ipcso  = ipcso;
-@@ -2740,205 +2702,218 @@ iegbe_tso(struct iegbe_adapter *adapter,
- 		context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
- 		context_desc->cmd_and_length = cpu_to_le32(cmd_length);
- 
--        if (++i == tx_ring->count) { i = 0; }
-+		buffer_info->time_stamp = jiffies;
-+		buffer_info->next_to_watch = i;
-+
-+		if (++i == tx_ring->count) i = 0;
- 		tx_ring->next_to_use = i;
- 
--		return TRUE;
-+		return true;
- 	}
--#endif
--
--	return FALSE;
-+	return false;
- }
- 
--static inline boolean_t
--iegbe_tx_csum(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
--              struct sk_buff *skb)
-+static bool iegbe_tx_csum(struct iegbe_adapter *adapter,
-+			  struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
- {
- 	struct iegbe_context_desc *context_desc;
-+	struct iegbe_buffer *buffer_info;
- 	unsigned int i;
--	uint8_t css;
-+	u8 css;
- 
--	if (likely(skb->ip_summed == CHECKSUM_HW)) {
--		css = skb->h.raw - skb->data;
-+	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
-+		css = skb_transport_offset(skb);
- 
--		i = tx_ring->next_to_use;
--		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-+	i = tx_ring->next_to_use;
-+	buffer_info = &tx_ring->buffer_info[i];
-+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
- 
-+		context_desc->lower_setup.ip_config = 0;
- 		context_desc->upper_setup.tcp_fields.tucss = css;
--		context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
-+		context_desc->upper_setup.tcp_fields.tucso =
-+			css + skb->csum_offset;
- 		context_desc->upper_setup.tcp_fields.tucse = 0;
- 		context_desc->tcp_seg_setup.data = 0;
- 		context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
- 
--        if (unlikely(++i == tx_ring->count)) { i = 0; }
-+		buffer_info->time_stamp = jiffies;
-+		buffer_info->next_to_watch = i;
-+
-+		if (unlikely(++i == tx_ring->count)) i = 0;
- 		tx_ring->next_to_use = i;
- 
--		return TRUE;
-+		return true;
- 	}
- 
--	return FALSE;
-+	return false;
- }
- 
--#define E1000_MAX_TXD_PWR	12
--#define E1000_MAX_DATA_PER_TXD	(1<<E1000_MAX_TXD_PWR)
-+#define E1000_MAX_TXD_PWR    12
-+#define E1000_MAX_DATA_PER_TXD    (1<<E1000_MAX_TXD_PWR)
- 
--static inline int
--iegbe_tx_map(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
--             struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
--             unsigned int nr_frags, unsigned int mss)
-+static int iegbe_tx_map(struct iegbe_adapter *adapter,
-+			struct iegbe_tx_ring *tx_ring,
-+			struct sk_buff *skb, unsigned int first,
-+			unsigned int max_per_txd, unsigned int nr_frags,
-+			unsigned int mss)
- {
--	struct iegbe_buffer *buffer_info;
--	unsigned int len = skb->len;
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct iegbe_buffer *buffer_info;
-+    unsigned int len = skb->len;
- 	unsigned int offset = 0, size, count = 0, i;
--#ifdef MAX_SKB_FRAGS
--	unsigned int f;
--	len -= skb->data_len;
--#endif
-+    unsigned int f;
-+    len -= skb->data_len;
- 
--	i = tx_ring->next_to_use;
-+    i = tx_ring->next_to_use;
-+
-+    while(len) {
-+        buffer_info = &tx_ring->buffer_info[i];
-+        size = min(len, max_per_txd);
-+		/* Workaround for Controller erratum --
-+		 * descriptor for non-tso packet in a linear SKB that follows a
-+		 * tso gets written back prematurely before the data is fully
-+		 * DMA'd to the controller */
-+		if (!skb->data_len && tx_ring->last_tx_tso &&
-+		    !skb_is_gso(skb)) {
-+			tx_ring->last_tx_tso = 0;
-+			size -= 4;
-+        }
- 
--	while(len) {
--		buffer_info = &tx_ring->buffer_info[i];
--		size = min(len, max_per_txd);
--#ifdef NETIF_F_TSO
- 		/* Workaround for premature desc write-backs
- 		 * in TSO mode.  Append 4-byte sentinel desc */
--        if(unlikely(mss && !nr_frags && size == len && size > 0x8)) {
--            size -= 0x4;
-+		if (unlikely(mss && !nr_frags && size == len && size > 8))
-+			size -= 4;
-+        /* work-around for errata 10 and it applies
-+         * to all controllers in PCI-X mode
-+         * The fix is to make sure that the first descriptor of a
-+         * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
-+         */
-+		if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
-+		                (size > 2015) && count == 0))
-+		        size = 2015;
-+
-+        /* Workaround for potential 82544 hang in PCI-X.  Avoid
-+         * terminating buffers within evenly-aligned dwords. */
-+        if(unlikely(adapter->pcix_82544 &&
-+		   !((unsigned long)(skb->data + offset + size - 1) & 4) &&
-+		   size > 4))
-+			size -= 4;
-+
-+        buffer_info->length = size;
-+        buffer_info->dma =
-+            pci_map_single(adapter->pdev,
-+                skb->data + offset,
-+                size,
-+                PCI_DMA_TODEVICE);
-+        buffer_info->time_stamp = jiffies;
-+		buffer_info->next_to_watch = i;
-+
-+        len -= size;
-+        offset += size;
-+        count++;
-+		if (unlikely(++i == tx_ring->count)) i = 0;
-+    }
-+
-+	for (f = 0; f < nr_frags; f++) {
-+        struct skb_frag_struct *frag;
-+
-+        frag = &skb_shinfo(skb)->frags[f];
-+        len = frag->size;
-+        offset = frag->page_offset;
-+
-+        while(len) {
-+            buffer_info = &tx_ring->buffer_info[i];
-+            size = min(len, max_per_txd);
-+            /* Workaround for premature desc write-backs
-+             * in TSO mode.  Append 4-byte sentinel desc */
-+			if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
-+				size -= 4;
-+            /* Workaround for potential 82544 hang in PCI-X.
-+             * Avoid terminating buffers within evenly-aligned
-+             * dwords. */
-+            if(unlikely(adapter->pcix_82544 &&
-+			   !((unsigned long)(frag->page+offset+size-1) & 4) &&
-+			   size > 4))
-+				size -= 4;
-+
-+            buffer_info->length = size;
-+            buffer_info->dma =
-+                pci_map_page(adapter->pdev,
-+                    frag->page,
-+                    offset,
-+                    size,
-+                    PCI_DMA_TODEVICE);
-+            buffer_info->time_stamp = jiffies;
-+			buffer_info->next_to_watch = i;
-+
-+            len -= size;
-+            offset += size;
-+            count++;
-+			if (unlikely(++i == tx_ring->count)) i = 0;
-         }
--#endif
--		/* work-around for errata 10 and it applies
--		 * to all controllers in PCI-X mode
--		 * The fix is to make sure that the first descriptor of a
--		 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
--		 */
--		if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
--                        (size > 0x7df) && count == 0)) {
--                size = 0x7df;
--        }
--		/* Workaround for potential 82544 hang in PCI-X.  Avoid
--		 * terminating buffers within evenly-aligned dwords. */
--		if(unlikely(adapter->pcix_82544 &&
--           !((unsigned long)(skb->data + offset + size - 0x8) & 0x4) &&
--           size > 0x4)) {
--            size -= 0x4;
--        }
--		buffer_info->length = size;
--		buffer_info->dma =
--			pci_map_single(adapter->pdev,
--				skb->data + offset,
--				size,
--				PCI_DMA_TODEVICE);
--		buffer_info->time_stamp = jiffies;
--
--		len -= size;
--		offset += size;
--		count++;
--        if(unlikely(++i == tx_ring->count)) { i = 0; }
--	}
--
--#ifdef MAX_SKB_FRAGS
--	for(f = 0; f < nr_frags; f++) {
--		struct skb_frag_struct *frag;
--
--		frag = &skb_shinfo(skb)->frags[f];
--		len = frag->size;
--		offset = frag->page_offset;
--
--		while(len) {
--			buffer_info = &tx_ring->buffer_info[i];
--			size = min(len, max_per_txd);
--#ifdef NETIF_F_TSO
--			/* Workaround for premature desc write-backs
--			 * in TSO mode.  Append 4-byte sentinel desc */
--            if(unlikely(mss && f == (nr_frags-0x1) &&
--                    size == len && size > 0x8)) {
--                size -= 0x4;
--            }
--#endif
--			/* Workaround for potential 82544 hang in PCI-X.
--			 * Avoid terminating buffers within evenly-aligned
--			 * dwords. */
--			if(unlikely(adapter->pcix_82544 &&
--               !((unsigned long)(frag->page+offset+size-0x1) & 0x4) &&
--               size > 0x4)) {
--                size -= 0x4;
--            }
--			buffer_info->length = size;
--			buffer_info->dma =
--				pci_map_page(adapter->pdev,
--					frag->page,
--					offset,
--					size,
--					PCI_DMA_TODEVICE);
--			buffer_info->time_stamp = jiffies;
--
--			len -= size;
--			offset += size;
--			count++;
--            if(unlikely(++i == tx_ring->count))  { i = 0; }
--		}
--	}
--#endif
-+    }
- 
--    i = (i == 0) ? tx_ring->count - 0x1 : i - 0x1;
--	tx_ring->buffer_info[i].skb = skb;
--	tx_ring->buffer_info[first].next_to_watch = i;
-+	i = (i == 0) ? tx_ring->count - 1 : i - 1;
-+    tx_ring->buffer_info[i].skb = skb;
-+    tx_ring->buffer_info[first].next_to_watch = i;
- 
--	return count;
-+    return count;
- }
- 
--static inline void
--iegbe_tx_queue(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
--               int tx_flags, int count)
-+static void iegbe_tx_queue(struct iegbe_adapter *adapter,
-+			   struct iegbe_tx_ring *tx_ring, int tx_flags,
-+			   int count)
- {
-+	struct iegbe_hw *hw = &adapter->hw;
- 	struct iegbe_tx_desc *tx_desc = NULL;
- 	struct iegbe_buffer *buffer_info;
--	uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
-+	u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
- 	unsigned int i;
- 
--	if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
-+	if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
- 		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- 		             E1000_TXD_CMD_TSE;
--        txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
-+		txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- 
--        if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) {
--            txd_upper |= E1000_TXD_POPTS_IXSM << 0x8;
--        }
-+		if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
-+			txd_upper |= E1000_TXD_POPTS_IXSM << 8;
- 	}
- 
--	if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
-+	if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
- 		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
--        txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
--	}
--
--	if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
--		txd_lower |= E1000_TXD_CMD_VLE;
--		txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
-+		txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- 	}
- 
--	i = tx_ring->next_to_use;
-+    if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
-+        txd_lower |= E1000_TXD_CMD_VLE;
-+        txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
-+    }
- 
--	while(count--) {
--		buffer_info = &tx_ring->buffer_info[i];
--		tx_desc = E1000_TX_DESC(*tx_ring, i);
--		tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
--		tx_desc->lower.data =
--			cpu_to_le32(txd_lower | buffer_info->length);
--		tx_desc->upper.data = cpu_to_le32(txd_upper);
--        if(unlikely(++i == tx_ring->count)) { i = 0; }
--	}
--    if(tx_desc != NULL) {
--		tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
--    }
--	/* Force memory writes to complete before letting h/w
--	 * know there are new descriptors to fetch.  (Only
--	 * applicable for weak-ordered memory model archs,
--	 * such as IA-64). */
--	wmb();
-+    i = tx_ring->next_to_use;
- 
--	tx_ring->next_to_use = i;
--	writel(i, adapter->hw.hw_addr + tx_ring->tdt);
-+    while(count--) {
-+        buffer_info = &tx_ring->buffer_info[i];
-+        tx_desc = E1000_TX_DESC(*tx_ring, i);
-+        tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-+        tx_desc->lower.data =
-+            cpu_to_le32(txd_lower | buffer_info->length);
-+        tx_desc->upper.data = cpu_to_le32(txd_upper);
-+		if (unlikely(++i == tx_ring->count)) i = 0;
-+    }
-+
-+        tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
-+
-+    /* Force memory writes to complete before letting h/w
-+     * know there are new descriptors to fetch.  (Only
-+     * applicable for weak-ordered memory model archs,
-+     * such as IA-64). */
-+    wmb();
-+
-+    tx_ring->next_to_use = i;
-+	writel(i, hw->hw_addr + tx_ring->tdt);
-+	/* we need this if more than one processor can write to our tail
-+	 * at a time, it syncronizes IO on IA64/Altix systems */
-+	mmiowb();
- }
- 
- /**
-@@ -2950,113 +2925,132 @@ iegbe_tx_queue(struct iegbe_adapter *ada
-  * to the beginning of the Tx FIFO.
-  **/
- 
--static inline int
--iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter, struct sk_buff *skb)
-+#define E1000_FIFO_HDR			0x10
-+#define E1000_82547_PAD_LEN		0x3E0
-+static int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
-+				       struct sk_buff *skb)
- {
--	uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
--	uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
-+	u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
-+	u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
- 
--	E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
-+	skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
- 
--    if(adapter->link_duplex != HALF_DUPLEX) {
--		goto no_fifo_stall_required;
--    }
--    if(atomic_read(&adapter->tx_fifo_stall)) {
--		return 1;
-+	if (adapter->link_duplex != HALF_DUPLEX)
-+        goto no_fifo_stall_required;
-+
-+	if (atomic_read(&adapter->tx_fifo_stall))
-+        return 1;
-+
-+    if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
-+		atomic_set(&adapter->tx_fifo_stall, 1);
-+        return 1;
-     }
--	if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
--        atomic_set(&adapter->tx_fifo_stall, 0x1);
--		return 1;
--	}
- 
- no_fifo_stall_required:
--	adapter->tx_fifo_head += skb_fifo_len;
--    if(adapter->tx_fifo_head >= adapter->tx_fifo_size) {
--		adapter->tx_fifo_head -= adapter->tx_fifo_size;
--    }
-+    adapter->tx_fifo_head += skb_fifo_len;
-+	if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
-+        adapter->tx_fifo_head -= adapter->tx_fifo_size;
- 	return 0;
- }
- 
--static inline int
--iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter, struct sk_buff *skb)
-+#define MINIMUM_DHCP_PACKET_SIZE 282
-+static int iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter,
-+				    struct sk_buff *skb)
- {
- 	struct iegbe_hw *hw =  &adapter->hw;
--	uint16_t length, offset;
--#ifdef NETIF_F_HW_VLAN_TX
--	if(vlan_tx_tag_present(skb)) {
--		if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
--			( adapter->hw.mng_cookie.status &
--              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) {
-+	u16 length, offset;
-+	if (vlan_tx_tag_present(skb)) {
-+		if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
-+			( hw->mng_cookie.status &
-+			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
- 			return 0;
- 	}
--    }
--#endif
--	if(htons(ETH_P_IP) == skb->protocol) {
--		const struct iphdr *ip = skb->nh.iph;
--		if(IPPROTO_UDP == ip->protocol) {
--			struct udphdr *udp = (struct udphdr *)(skb->h.uh);
--            if(ntohs(udp->dest) == 0x43) {      /* 0x43 = 67 */
--                offset = (uint8_t *)udp + 0x8 - skb->data;
--				length = skb->len - offset;
--
--				return iegbe_mng_write_dhcp_info(hw,
--                        (uint8_t *)udp + 0x8, length);
--			}
--		}
--	} else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
--		struct ethhdr *eth = (struct ethhdr *) skb->data;
--		if((htons(ETH_P_IP) == eth->h_proto)) {
-+	if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
-+		struct ethhdr *eth = (struct ethhdr *)skb->data;
-+		if ((htons(ETH_P_IP) == eth->h_proto)) {
- 			const struct iphdr *ip =
--                (struct iphdr *)((uint8_t *)skb->data+0xe);
--			if(IPPROTO_UDP == ip->protocol) {
-+				(struct iphdr *)((u8 *)skb->data+14);
-+			if (IPPROTO_UDP == ip->protocol) {
- 				struct udphdr *udp =
--					(struct udphdr *)((uint8_t *)ip +
--                        (ip->ihl << 0x2));
--                if(ntohs(udp->dest) == 0x43) {
--                    offset = (uint8_t *)udp + 0x8 - skb->data;
-+					(struct udphdr *)((u8 *)ip +
-+						(ip->ihl << 2));
-+				if (ntohs(udp->dest) == 67) {
-+					offset = (u8 *)udp + 8 - skb->data;
- 					length = skb->len - offset;
- 
- 					return iegbe_mng_write_dhcp_info(hw,
--                            (uint8_t *)udp + 0x8,
-+							(u8 *)udp + 8,
- 							length);
--				}
-+    }
- 			}
- 		}
- 	}
- 	return 0;
- }
- 
--static int
--iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-+static int __iegbe_maybe_stop_tx(struct net_device *netdev, int size)
-+{
-+	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_tx_ring *tx_ring = adapter->tx_ring;
-+
-+	netif_stop_queue(netdev);
-+	/* Herbert's original patch had:
-+	 *  smp_mb__after_netif_stop_queue();
-+	 * but since that doesn't exist yet, just open code it. */
-+	smp_mb();
-+
-+	/* We need to check again in a case another CPU has just
-+	 * made room available. */
-+	if (likely(E1000_DESC_UNUSED(tx_ring) < size))
-+		return -EBUSY;
-+
-+	/* A reprieve! */
-+	netif_start_queue(netdev);
-+	++adapter->restart_queue;
-+	return 0;
-+}
-+
-+static int iegbe_maybe_stop_tx(struct net_device *netdev,
-+                               struct iegbe_tx_ring *tx_ring, int size)
-+{
-+	if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
-+		return 0;
-+	return __iegbe_maybe_stop_tx(netdev, size);
-+}
-+
-+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-+static int iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_hw *hw = &adapter->hw;
- 	struct iegbe_tx_ring *tx_ring;
- 	unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
- 	unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
- 	unsigned int tx_flags = 0;
--	unsigned int len = skb->len;
-+	unsigned int len = skb->len - skb->data_len;
- 	unsigned long flags = 0;
--	unsigned int nr_frags = 0;
--	unsigned int mss = 0;
-+	unsigned int nr_frags;
-+	unsigned int mss;
- 	int count = 0;
-- 	int tso;
--#ifdef MAX_SKB_FRAGS
-+	int tso;
- 	unsigned int f;
--	len -= skb->data_len;
--#endif
- 
--#ifdef CONFIG_E1000_MQ
--	tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
--#else
-+	/* This goes back to the question of how to logically map a tx queue
-+	 * to a flow.  Right now, performance is impacted slightly negatively
-+	 * if using multiple tx queues.  If the stack breaks away from a
-+	 * single qdisc implementation, we can look at this again. */
- 	tx_ring = adapter->tx_ring;
--#endif
- 
- 	if (unlikely(skb->len <= 0)) {
- 		dev_kfree_skb_any(skb);
- 		return NETDEV_TX_OK;
- 	}
- 
--#ifdef NETIF_F_TSO
-+	/* 82571 and newer doesn't need the workaround that limited descriptor
-+	 * length to 4kB */
-+	if (hw->mac_type >= iegbe_82571)
-+		max_per_txd = 8192;
-+
- 	mss = skb_shinfo(skb)->gso_size;
- 	/* The controller does a simple calculation to
- 	 * make sure there is enough room in the FIFO before
-@@ -3064,164 +3058,150 @@ iegbe_xmit_frame(struct sk_buff *skb, st
- 	 * 4 = ceil(buffer len/mss).  To make sure we don't
- 	 * overrun the FIFO, adjust the max buffer len if mss
- 	 * drops. */
--	if(mss) {
--        max_per_txd = min(mss << 0x2, max_per_txd);
--        max_txd_pwr = fls(max_per_txd) - 0x1;
-+	if (mss) {
-+		u8 hdr_len;
-+		max_per_txd = min(mss << 2, max_per_txd);
-+		max_txd_pwr = fls(max_per_txd) - 1;
-+
-+		/* TSO Workaround for 82571/2/3 Controllers -- if skb->data
-+		* points to just header, pull a few bytes of payload from
-+		* frags into skb->data */
-+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-+		if (skb->data_len && hdr_len == len) {
-+			switch (hw->mac_type) {
-+			case iegbe_82544:
-+				/* Make sure we have room to chop off 4 bytes,
-+				 * and that the end alignment will work out to
-+				 * this hardware's requirements
-+				 * NOTE: this is a TSO only workaround
-+				 * if end byte alignment not correct move us
-+				 * into the next dword */
-+					break;
-+				/* fall through */
-+			case iegbe_82571:
-+			case iegbe_82572:
-+			case iegbe_82573:
-+				break;
-+			default:
-+				/* do nothing */
-+				break;
-+			}
-+		}
- 	}
- 
--    if((mss) || (skb->ip_summed == CHECKSUM_HW)) {
-+	/* reserve a descriptor for the offload context */
-+	if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
- 		count++;
--    }
- 	count++;
--#else
--    if(skb->ip_summed == CHECKSUM_HW) {
-+
-+	/* Controller Erratum workaround */
-+	if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
- 		count++;
--    {
--#endif
-+
- 	count += TXD_USE_COUNT(len, max_txd_pwr);
- 
--    if(adapter->pcix_82544) {
-+	if (adapter->pcix_82544)
- 		count++;
--    }
-+
- 	/* work-around for errata 10 and it applies to all controllers
- 	 * in PCI-X mode, so add one more descriptor to the count
- 	 */
--	if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
--            (len > 0x7df))) {
-+	if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
-+			(len > 2015)))
- 		count++;
--    }
--#ifdef MAX_SKB_FRAGS
-+
- 	nr_frags = skb_shinfo(skb)->nr_frags;
--	for(f = 0; f < nr_frags; f++)
-+	for (f = 0; f < nr_frags; f++)
- 		count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
- 				       max_txd_pwr);
--    if(adapter->pcix_82544) {
-+	if (adapter->pcix_82544)
- 		count += nr_frags;
--    }
--#ifdef NETIF_F_TSO
--	/* TSO Workaround for 82571/2 Controllers -- if skb->data
--	 * points to just header, pull a few bytes of payload from
--	 * frags into skb->data */
--	if (skb_is_gso(skb)) {
--		uint8_t hdr_len;
--        hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
--		if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) &&
--			(adapter->hw.mac_type == iegbe_82571 ||
--			adapter->hw.mac_type == iegbe_82572)) {
--			unsigned int pull_size;
--            pull_size = min((unsigned int)0x4, skb->data_len);
--			if (!__pskb_pull_tail(skb, pull_size)) {
--				printk(KERN_ERR "__pskb_pull_tail failed.\n");
--				dev_kfree_skb_any(skb);
--				return -EFAULT;
--			}
--		}
--	}
--#endif
--#endif
- 
--    if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == iegbe_82573) ) {
-+
-+	if (hw->tx_pkt_filtering &&
-+	    (hw->mac_type == iegbe_82573))
- 		iegbe_transfer_dhcp_info(adapter, skb);
--    }
--#ifdef NETIF_F_LLTX
--	local_irq_save(flags);
--	if (!spin_trylock(&tx_ring->tx_lock)) {
-+
-+	if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
- 		/* Collision - tell upper layer to requeue */
--		local_irq_restore(flags);
- 		return NETDEV_TX_LOCKED;
--	}
--#else
--	spin_lock_irqsave(&tx_ring->tx_lock, flags);
--#endif
- 
- 	/* need: count + 2 desc gap to keep tail from touching
- 	 * head, otherwise try next time */
--    if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 0x2)) {
--		netif_stop_queue(netdev);
-+	if (unlikely(iegbe_maybe_stop_tx(netdev, tx_ring, count + 2))) {
- 		spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- 		return NETDEV_TX_BUSY;
- 	}
- 
--	if(unlikely(adapter->hw.mac_type == iegbe_82547)) {
--		if(unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
-+	if (unlikely(hw->mac_type == iegbe_82547)) {
-+		if (unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
- 			netif_stop_queue(netdev);
--			mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
-+			mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
- 			spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- 			return NETDEV_TX_BUSY;
- 		}
- 	}
- 
--#ifndef NETIF_F_LLTX
--	spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
--
--#ifdef NETIF_F_HW_VLAN_TX
--	if(unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
-+	if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
- 		tx_flags |= E1000_TX_FLAGS_VLAN;
- 		tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- 	}
--#endif
- 
- 	first = tx_ring->next_to_use;
- 
- 	tso = iegbe_tso(adapter, tx_ring, skb);
- 	if (tso < 0) {
- 		dev_kfree_skb_any(skb);
--#ifdef NETIF_F_LLTX
- 		spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
- 		return NETDEV_TX_OK;
- 	}
- 
--    if (likely(tso)) {
-+	if (likely(tso)) {
-+		tx_ring->last_tx_tso = 1;
- 		tx_flags |= E1000_TX_FLAGS_TSO;
--    } else if (likely(iegbe_tx_csum(adapter, tx_ring, skb))) {
-+	} else if (likely(iegbe_tx_csum(adapter, tx_ring, skb)))
- 		tx_flags |= E1000_TX_FLAGS_CSUM;
--    }
-+
- 	/* Old method was to assume IPv4 packet by default if TSO was enabled.
- 	 * 82571 hardware supports TSO capabilities for IPv6 as well...
- 	 * no longer assume, we must. */
--    if (likely(skb->protocol == ntohs(ETH_P_IP))) {
-+	if (likely(skb->protocol == htons(ETH_P_IP)))
- 		tx_flags |= E1000_TX_FLAGS_IPV4;
--    }
-+
- 	iegbe_tx_queue(adapter, tx_ring, tx_flags,
- 	               iegbe_tx_map(adapter, tx_ring, skb, first,
- 	                            max_per_txd, nr_frags, mss));
- 
- 	netdev->trans_start = jiffies;
- 
--#ifdef NETIF_F_LLTX
- 	/* Make sure there is space in the ring for the next send. */
--    if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 0x2)) {
--		netif_stop_queue(netdev);
--    }
--	spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
-+	iegbe_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
- 
-+	spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- 	return NETDEV_TX_OK;
- }
- 
-+
- /**
-  * iegbe_tx_timeout - Respond to a Tx Hang
-  * @netdev: network interface device structure
-  **/
- 
--static void
--iegbe_tx_timeout(struct net_device *netdev)
-+static void iegbe_tx_timeout(struct net_device *netdev)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
- 
--	/* Do the reset outside of interrupt context */
--	schedule_work(&adapter->tx_timeout_task);
-+    /* Do the reset outside of interrupt context */
-+	adapter->tx_timeout_count++;
-+	schedule_work(&adapter->reset_task);
- }
- 
--static void
--iegbe_tx_timeout_task(struct net_device *netdev)
-+static void iegbe_reset_task(struct work_struct *work)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_adapter *adapter =
-+		container_of(work, struct iegbe_adapter, reset_task);
- 
--	iegbe_down(adapter);
--	iegbe_up(adapter);
-+	iegbe_reinit_locked(adapter);
- }
- 
- /**
-@@ -3232,13 +3212,12 @@ iegbe_tx_timeout_task(struct net_device
-  * The statistics are actually updated from the timer callback.
-  **/
- 
--static struct net_device_stats *
--iegbe_get_stats(struct net_device *netdev)
-+static struct net_device_stats *iegbe_get_stats(struct net_device *netdev)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
- 
--	iegbe_update_stats(adapter);
--	return &adapter->net_stats;
-+	/* only return the current stats */
-+    return &adapter->net_stats;
- }
- 
- /**
-@@ -3249,67 +3228,55 @@ iegbe_get_stats(struct net_device *netde
-  * Returns 0 on success, negative on failure
-  **/
- 
--static int
--iegbe_change_mtu(struct net_device *netdev, int new_mtu)
-+static int iegbe_change_mtu(struct net_device *netdev, int new_mtu)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_hw *hw = &adapter->hw;
-+    int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- 
--	if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
--	   (max_frame > MAX_JUMBO_FRAME_SIZE)) {
--		DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
--		return -EINVAL;
--	}
-+    if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
-+       (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-+        DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
-+        return -EINVAL;
-+    }
- 
-+	/* Adapter-specific max frame size limits. */
-+	switch (hw->mac_type) {
-+	case iegbe_undefined ... iegbe_82542_rev2_1:
-+		if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
-+			DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
-+        return -EINVAL;
-+    }
-+		break;
-+	case iegbe_82571:
-+	case iegbe_82572:
- #define MAX_STD_JUMBO_FRAME_SIZE 9234
--	/* might want this to be bigger enum check... */
--	/* 82571 controllers limit jumbo frame size to 10500 bytes */
--	if ((adapter->hw.mac_type == iegbe_82571 ||
--	     adapter->hw.mac_type == iegbe_82572) &&
--	    max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
--		DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported "
--				    "on 82571 and 82572 controllers.\n");
--		return -EINVAL;
--	}
--
--	if(adapter->hw.mac_type == iegbe_82573 &&
--	    max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
--		DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
--				    "on 82573\n");
--		return -EINVAL;
--	}
--
--	if(adapter->hw.mac_type > iegbe_82547_rev_2) {
--		adapter->rx_buffer_len = max_frame;
--        E1000_ROUNDUP(adapter->rx_buffer_len, 0x1024);
--	} else {
--		if(unlikely((adapter->hw.mac_type < iegbe_82543) &&
--		   (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
--			DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
--					    "on 82542\n");
--			return -EINVAL;
--
--		} else {
--			if(max_frame <= E1000_RXBUFFER_2048) {
--				adapter->rx_buffer_len = E1000_RXBUFFER_2048;
--			} else if(max_frame <= E1000_RXBUFFER_4096) {
--				adapter->rx_buffer_len = E1000_RXBUFFER_4096;
--			} else if(max_frame <= E1000_RXBUFFER_8192) {
--				adapter->rx_buffer_len = E1000_RXBUFFER_8192;
--			} else if(max_frame <= E1000_RXBUFFER_16384) {
--				adapter->rx_buffer_len = E1000_RXBUFFER_16384;
--			}
-+		if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-+			DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
-+            return -EINVAL;
- 		}
-+		break;
-+	default:
-+		break;
- 	}
-+	if (max_frame <= E1000_RXBUFFER_256)
-+		adapter->rx_buffer_len = E1000_RXBUFFER_256;
-+	else if (max_frame <= E1000_RXBUFFER_2048)
-+                adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-+	else if (max_frame <= E1000_RXBUFFER_4096)
-+                adapter->rx_buffer_len = E1000_RXBUFFER_4096;
-+	else if (max_frame <= E1000_RXBUFFER_8192)
-+                adapter->rx_buffer_len = E1000_RXBUFFER_8192;
-+	else if (max_frame <= E1000_RXBUFFER_16384)
-+                adapter->rx_buffer_len = E1000_RXBUFFER_16384;
- 
--	netdev->mtu = new_mtu;
-+	/* adjust allocation if LPE protects us, and we aren't using SBP */
- 
--	if(netif_running(netdev)) {
--		iegbe_down(adapter);
--		iegbe_up(adapter);
--	}
-+    netdev->mtu = new_mtu;
-+	hw->max_frame_size = max_frame;
- 
--	adapter->hw.max_frame_size = max_frame;
-+	if (netif_running(netdev))
-+		iegbe_reinit_locked(adapter);
- 
- 	return 0;
- }
-@@ -3319,224 +3286,189 @@ iegbe_change_mtu(struct net_device *netd
-  * @adapter: board private structure
-  **/
- 
--void
--iegbe_update_stats(struct iegbe_adapter *adapter)
-+void iegbe_update_stats(struct iegbe_adapter *adapter)
- {
--	struct iegbe_hw *hw = &adapter->hw;
--	unsigned long flags = 0;
--	uint16_t phy_tmp;
-+    struct iegbe_hw *hw = &adapter->hw;
-+    unsigned long flags = 0x0;
-+    uint16_t phy_tmp;
- 
- #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
- 
--	spin_lock_irqsave(&adapter->stats_lock, flags);
-+    spin_lock_irqsave(&adapter->stats_lock, flags);
- 
--	/* these counters are modified from iegbe_adjust_tbi_stats,
--	 * called from the interrupt context, so they must only
--	 * be written while holding adapter->stats_lock
--	 */
-+    /* these counters are modified from iegbe_adjust_tbi_stats,
-+     * called from the interrupt context, so they must only
-+     * be written while holding adapter->stats_lock
-+     */
- 
--	adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
--	adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
--	adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
--	adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
--	adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
--	adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
--	adapter->stats.roc += E1000_READ_REG(hw, ROC);
--	adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
--	adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
--	adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
--	adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
--	adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
--	adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
--
--	adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
--	adapter->stats.mpc += E1000_READ_REG(hw, MPC);
--	adapter->stats.scc += E1000_READ_REG(hw, SCC);
--	adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
--	adapter->stats.mcc += E1000_READ_REG(hw, MCC);
--	adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
--	adapter->stats.dc += E1000_READ_REG(hw, DC);
--	adapter->stats.sec += E1000_READ_REG(hw, SEC);
--	adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
--	adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
--	adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
--	adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
--	adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
--	adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
--	adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
--	adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
--	adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
--	adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
--	adapter->stats.ruc += E1000_READ_REG(hw, RUC);
--	adapter->stats.rfc += E1000_READ_REG(hw, RFC);
--	adapter->stats.rjc += E1000_READ_REG(hw, RJC);
--	adapter->stats.torl += E1000_READ_REG(hw, TORL);
--	adapter->stats.torh += E1000_READ_REG(hw, TORH);
--	adapter->stats.totl += E1000_READ_REG(hw, TOTL);
--	adapter->stats.toth += E1000_READ_REG(hw, TOTH);
--	adapter->stats.tpr += E1000_READ_REG(hw, TPR);
--	adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
--	adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
--	adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
--	adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
--	adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
--	adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
--	adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
--	adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
--
--	/* used for adaptive IFS */
--
--	hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
--	adapter->stats.tpt += hw->tx_packet_delta;
--	hw->collision_delta = E1000_READ_REG(hw, COLC);
--	adapter->stats.colc += hw->collision_delta;
--
--	if(hw->mac_type >= iegbe_82543) {
--		adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
--		adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
--		adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
--		adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
--		adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
--		adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
--	}
--	if(hw->mac_type > iegbe_82547_rev_2) {
--		adapter->stats.iac += E1000_READ_REG(hw, IAC);
--		adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
--		adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
--		adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
--		adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
--		adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
--		adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
--		adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
--		adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
--	}
--
--	/* Fill out the OS statistics structure */
--
--	adapter->net_stats.rx_packets = adapter->stats.gprc;
--	adapter->net_stats.tx_packets = adapter->stats.gptc;
--	adapter->net_stats.rx_bytes = adapter->stats.gorcl;
--	adapter->net_stats.tx_bytes = adapter->stats.gotcl;
--	adapter->net_stats.multicast = adapter->stats.mprc;
--	adapter->net_stats.collisions = adapter->stats.colc;
--
--	/* Rx Errors */
--
--	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
--		adapter->stats.crcerrs + adapter->stats.algnerrc +
--		adapter->stats.rlec + adapter->stats.mpc +
--		adapter->stats.cexterr;
--	adapter->net_stats.rx_dropped = adapter->stats.mpc;
--	adapter->net_stats.rx_length_errors = adapter->stats.rlec;
--	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
--	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
--	adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
--	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
--
--	/* Tx Errors */
--
--	adapter->net_stats.tx_errors = adapter->stats.ecol +
--	                               adapter->stats.latecol;
--	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
--	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
--	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
-+    adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
-+    adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
-+    adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
-+    adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
-+    adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
-+    adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
-+    adapter->stats.roc += E1000_READ_REG(hw, ROC);
-+    adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
-+    adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
-+    adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
-+    adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
-+    adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
-+    adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
-+
-+    adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
-+    adapter->stats.mpc += E1000_READ_REG(hw, MPC);
-+    adapter->stats.scc += E1000_READ_REG(hw, SCC);
-+    adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
-+    adapter->stats.mcc += E1000_READ_REG(hw, MCC);
-+    adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
-+    adapter->stats.dc += E1000_READ_REG(hw, DC);
-+    adapter->stats.sec += E1000_READ_REG(hw, SEC);
-+    adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
-+    adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
-+    adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
-+    adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
-+    adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
-+    adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
-+    adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
-+    adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
-+    adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
-+    adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
-+    adapter->stats.ruc += E1000_READ_REG(hw, RUC);
-+    adapter->stats.rfc += E1000_READ_REG(hw, RFC);
-+    adapter->stats.rjc += E1000_READ_REG(hw, RJC);
-+    adapter->stats.torl += E1000_READ_REG(hw, TORL);
-+    adapter->stats.torh += E1000_READ_REG(hw, TORH);
-+    adapter->stats.totl += E1000_READ_REG(hw, TOTL);
-+    adapter->stats.toth += E1000_READ_REG(hw, TOTH);
-+    adapter->stats.tpr += E1000_READ_REG(hw, TPR);
-+    adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
-+    adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
-+    adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
-+    adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
-+    adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
-+    adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
-+    adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
-+    adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
-+
-+    /* used for adaptive IFS */
-+
-+    hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
-+    adapter->stats.tpt += hw->tx_packet_delta;
-+    hw->collision_delta = E1000_READ_REG(hw, COLC);
-+    adapter->stats.colc += hw->collision_delta;
-+
-+    if(hw->mac_type >= iegbe_82543) {
-+        adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
-+        adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
-+        adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
-+        adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
-+        adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
-+        adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
-+    }
-+    if(hw->mac_type > iegbe_82547_rev_2) {
-+        adapter->stats.iac += E1000_READ_REG(hw, IAC);
-+        adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
-+        adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
-+        adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
-+        adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
-+        adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
-+        adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
-+        adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
-+        adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
-+    }
-+
-+    /* Fill out the OS statistics structure */
-+
-+    adapter->net_stats.rx_packets = adapter->stats.gprc;
-+    adapter->net_stats.tx_packets = adapter->stats.gptc;
-+    adapter->net_stats.rx_bytes = adapter->stats.gorcl;
-+    adapter->net_stats.tx_bytes = adapter->stats.gotcl;
-+    adapter->net_stats.multicast = adapter->stats.mprc;
-+    adapter->net_stats.collisions = adapter->stats.colc;
-+
-+    /* Rx Errors */
-+
-+    adapter->net_stats.rx_errors = adapter->stats.rxerrc +
-+        adapter->stats.crcerrs + adapter->stats.algnerrc +
-+        adapter->stats.rlec + adapter->stats.mpc +
-+        adapter->stats.cexterr;
-+    adapter->net_stats.rx_dropped = adapter->stats.mpc;
-+    adapter->net_stats.rx_length_errors = adapter->stats.rlec;
-+    adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-+    adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-+    adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
-+    adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
-+
-+    /* Tx Errors */
-+
-+    adapter->net_stats.tx_errors = adapter->stats.ecol +
-+                                   adapter->stats.latecol;
-+    adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-+    adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-+    adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
- 
--	/* Tx Dropped needs to be maintained elsewhere */
-+    /* Tx Dropped needs to be maintained elsewhere */
- 
--	/* Phy Stats */
-+    /* Phy Stats */
- 
--	if(hw->media_type == iegbe_media_type_copper
-+    if(hw->media_type == iegbe_media_type_copper
-        || (hw->media_type == iegbe_media_type_oem
-            && iegbe_oem_phy_is_copper(&adapter->hw))) {
--		if((adapter->link_speed == SPEED_1000) &&
--		   (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
--			phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
--			adapter->phy_stats.idle_errors += phy_tmp;
--		}
-+        if((adapter->link_speed == SPEED_1000) &&
-+           (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
-+            phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
-+            adapter->phy_stats.idle_errors += phy_tmp;
-+        }
- 
--		if((hw->mac_type <= iegbe_82546) &&
--		   (hw->phy_type == iegbe_phy_m88) &&
-+        if((hw->mac_type <= iegbe_82546) &&
-+           (hw->phy_type == iegbe_phy_m88) &&
-            !iegbe_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp)) {
--			adapter->phy_stats.receive_errors += phy_tmp;
--	}
-+            adapter->phy_stats.receive_errors += phy_tmp;
-+        }
-     }
- 
--	spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+    spin_unlock_irqrestore(&adapter->stats_lock, flags);
- }
- 
--#ifdef CONFIG_E1000_MQ
--void
--iegbe_rx_schedule(void *data)
-+/**
-+ * iegbe_intr_msi - Interrupt Handler
-+ * @irq: interrupt number
-+ * @data: pointer to a network interface device structure
-+ **/
-+
-+static irqreturn_t iegbe_intr_msi(int irq, void *data)
- {
--	struct net_device *poll_dev, *netdev = data;
--	struct iegbe_adapter *adapter = netdev->priv;
--	int this_cpu = get_cpu();
--
--	poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
--	if (poll_dev == NULL) {
--		put_cpu();
--		return;
-+	struct net_device *netdev = data;
-+	struct iegbe_adapter *adapter = netdev_priv(netdev);
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u32 icr = E1000_READ_REG(&adapter->hw, ICR);
-+	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
-+		hw->get_link_status = 1;
-+		if (!test_bit(__E1000_DOWN, &adapter->flags))
-+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
- 	}
- 
--    if (likely(netif_rx_schedule_prep(poll_dev))) {
--		__netif_rx_schedule(poll_dev);
--    } else {
--		iegbe_irq_enable(adapter);
--    }
--	put_cpu();
--}
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
--/*
-- * Check for tx hang condition. This is the condition where a
-- * decsriptor is in the hardware and hasn't been processed for a
-- * while. This code is similar to the check in iegbe_clean_rx_irq()
-- */
--static void
--iegbe_tx_hang_check(struct iegbe_adapter *adapter,
--		    struct iegbe_tx_ring *tx_ring)
--{
--	struct net_device *netdev = adapter->netdev;
--	unsigned int i;
-+	if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
-+                       	 | E1000_ICR_TX_DESC_FIFO_PAR
-+			 | E1000_ICR_PB
-+			 | E1000_ICR_CPP_TARGET
-+			 | E1000_ICR_CPP_MASTER ))) {
- 
--    /* Check for a hang condition using the buffer currently at the Tx
--       head pointer */
--	i = readl(adapter->hw.hw_addr + tx_ring->tdh);
--
--	if (adapter->detect_tx_hung) {
--		/* Detect a transmit hang in hardware, this serializes the
--		 * check with the clearing of time_stamp and movement of i */
--		adapter->detect_tx_hung = FALSE;
--
--		if (tx_ring->buffer_info[i].dma &&
--		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
--		    && !(E1000_READ_REG(&adapter->hw, STATUS) &
--                 E1000_STATUS_TXOFF)) {
--
--			/* detected Tx unit hang */
--			DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
--					"  TDH                  <%x>\n"
--					"  TDT                  <%x>\n"
--					"  next_to_use          <%x>\n"
--					"  next_to_clean        <%x>\n"
--					"buffer_info[tdh]\n"
--					"  dma                  <%zx>\n"
--					"  time_stamp           <%lx>\n"
--                    "  jiffies              <%lx>\n",
--                    readl(adapter->hw.hw_addr + tx_ring->tdh),
--                    readl(adapter->hw.hw_addr + tx_ring->tdt),
--                    tx_ring->next_to_use,
--                    tx_ring->next_to_clean,
--                    (size_t)tx_ring->buffer_info[i].dma,
--                    tx_ring->buffer_info[i].time_stamp,
--                    jiffies);
--			netif_stop_queue(netdev);
--		}
-+	    iegbe_irq_disable(adapter);
-+	    printk("Critical error! ICR = 0x%x\n", icr);
-+	    return IRQ_HANDLED;
- 	}
--}
-+	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+		adapter->total_tx_bytes = 0;
-+		adapter->total_tx_packets = 0;
-+		adapter->total_rx_bytes = 0;
-+		adapter->total_rx_packets = 0;
-+		__netif_rx_schedule(netdev, &adapter->napi);
-+	} else
-+		iegbe_irq_enable(adapter);
- 
--#endif
-+	return IRQ_HANDLED;
-+}
- 
- /**
-  * iegbe_intr - Interrupt Handler
-@@ -3546,364 +3478,208 @@ iegbe_tx_hang_check(struct iegbe_adapter
-  **/
- 
- static irqreturn_t
--iegbe_intr(int irq, void *data, struct pt_regs *regs)
-+iegbe_intr(int irq, void *data)
- {
--	struct net_device *netdev = data;
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	struct iegbe_hw *hw = &adapter->hw;
--	 uint32_t rctl, tctl;
--	uint32_t icr = E1000_READ_REG(hw, ICR);
--#ifndef CONFIG_E1000_NAPI
--    uint32_t i;
--#ifdef IEGBE_GBE_WORKAROUND
--	int rx_cleaned;
--#endif
--#endif
-+    struct net_device *netdev = data;
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    struct iegbe_hw *hw = &adapter->hw;
-+	u32 icr = E1000_READ_REG(&adapter->hw, ICR);
- 
--    if(unlikely(!icr)) {
-+	if (unlikely(!icr))
- 		return IRQ_NONE;  /* Not our interrupt */
--    }
-+
-+	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
-+	 * not set, then the adapter didn't send an interrupt */
-+	if (unlikely(hw->mac_type >= iegbe_82571 &&
-+	             !(icr & E1000_ICR_INT_ASSERTED)))
-+		return IRQ_NONE;
-+
-+
- 	if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
--                       | E1000_ICR_TX_DESC_FIFO_PAR
--							  | E1000_ICR_PB
--							  | E1000_ICR_CPP_TARGET
--							  | E1000_ICR_CPP_MASTER ))) {
-+                       	 | E1000_ICR_TX_DESC_FIFO_PAR
-+			 | E1000_ICR_PB
-+			 | E1000_ICR_CPP_TARGET
-+			 | E1000_ICR_CPP_MASTER ))) {
- 
- 	    iegbe_irq_disable(adapter);
--	    tctl = E1000_READ_REG(&adapter->hw, TCTL);
--	    rctl = E1000_READ_REG(&adapter->hw, RCTL);
--	    E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_TCTL_EN);
--	    E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
--
--		 tasklet_data = (unsigned long) (icr + adapter->bd_number);
--		 tasklet_schedule(&iegbe_reset_tasklet);
--
--		return IRQ_HANDLED;
--	}
--
--#ifdef CONFIG_E1000_NAPI
--	atomic_inc(&adapter->irq_sem);
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Ensure that the TXQE interrupt is enabled in NAPI mode */
--    E1000_WRITE_REG(hw, IMC, ~E1000_IMS_TXQE);
--#else
--    E1000_WRITE_REG(hw, IMC, ~0);
--#endif
--	E1000_WRITE_FLUSH(hw);
--#ifdef CONFIG_E1000_MQ
--	if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
--		cpu_set(adapter->cpu_for_queue[0],
--			adapter->rx_sched_call_data.cpumask);
--		for (i = 1; i < adapter->num_queues; i++) {
--			cpu_set(adapter->cpu_for_queue[i],
--				adapter->rx_sched_call_data.cpumask);
--			atomic_inc(&adapter->irq_sem);
--		}
--		atomic_set(&adapter->rx_sched_call_data.count, i);
--		smp_call_async_mask(&adapter->rx_sched_call_data);
--	} else {
--        DEBUGOUT("call_data.count == %u\n",
--              atomic_read(&adapter->rx_sched_call_data.count));
-+	    printk("Critical error! ICR = 0x%x\n", icr);
-+	    return IRQ_HANDLED;
- 	}
--#else
--    if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) {
--		__netif_rx_schedule(&adapter->polling_netdev[0]);
--    } else {
--		iegbe_irq_enable(adapter);
--    }
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Clean the Tx ring */
--	for (i = 0; i < E1000_MAX_INTR; i++) {
--        adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
--        adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
--
--        adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
--        adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
--
--        /* Only clean Tx descriptors for a TXQE interrupt */
--        if(icr & E1000_ICR_TXQE) {
--            adapter->stats.txqec++;
--            iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
--        }
--        else {
--            iegbe_tx_hang_check(adapter, adapter->tx_ring);
--        }
--    }
- 
--#endif /*IEGBE_GBE_WORKAROUND */
--
--#else
--	/* Writing IMC and IMS is needed for 82547.
--	 * Due to Hub Link bus being occupied, an interrupt
--	 * de-assertion message is not able to be sent.
--	 * When an interrupt assertion message is generated later,
--	 * two messages are re-ordered and sent out.
--	 * That causes APIC to think 82547 is in de-assertion
--	 * state, while 82547 is in assertion state, resulting
--	 * in dead lock. Writing IMC forces 82547 into
--	 * de-assertion state.
--	 */
--	if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
--		atomic_inc(&adapter->irq_sem);
--		E1000_WRITE_REG(hw, IMC, ~0);
--	}
--
--#ifdef IEGBE_GBE_WORKAROUND
--
--	for (i = 0; i < E1000_MAX_INTR; i++) {
--	  rx_cleaned = adapter->clean_rx(adapter, adapter->rx_ring);
--      adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
--      adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
--
--      adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
--      adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
--
--      /* Only clean Tx descriptors for a TXQE interrupt */
--      if(icr & E1000_ICR_TXQE) {
--          adapter->stats.txqec++;
--          iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
--      }
--      else {
--          iegbe_tx_hang_check(adapter, adapter->tx_ring);
--      }
--      if(!rx_cleaned) {
--          break;
--    }
-+	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
-+	 * need for the IMC write */
-+	if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
-+		hw->get_link_status = 1;
-+		/* guard against interrupt when we're going down */
-+		if (!test_bit(__E1000_DOWN, &adapter->flags)) 
-+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+	
-     }
- 
--#else
--	for (i = 0; i < E1000_MAX_INTR; i++)
--		if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
--           !iegbe_clean_tx_irq(adapter, adapter->tx_ring))) {
--			break;
--        }
--#endif
--
--    if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
--		iegbe_irq_enable(adapter);
--    }
--#endif
--#ifdef E1000_COUNT_ICR
--	adapter->icr_txdw += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_txqe += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_lsc += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_rxseq += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_rxdmt += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_rxo += icr & 0x01UL;
--    icr >>= 0x1;
--	adapter->icr_rxt += icr & 0x01UL;
--	if(hw->mac_type != iegbe_icp_xxxx) {
--        icr >>= 0x2;
--		adapter->icr_mdac += icr & 0x01UL;
--        icr >>= 0x1;
--		adapter->icr_rxcfg += icr & 0x01UL;
--        icr >>= 0x1;
--		adapter->icr_gpi += icr & 0x01UL;
--	} else {
--        icr >>= 0x4;
--	}
--	if(hw->mac_type == iegbe_icp_xxxx) {
--        icr >>= 0xc;
--		adapter->icr_pb += icr & 0x01UL;
--        icr >>= 0x3;
--		adapter->icr_intmem_icp_xxxx += icr & 0x01UL;
--            icr >>= 0x1;
--    		adapter->icr_cpp_target += icr & 0x01UL;
--            icr >>= 0x1;
--    		adapter->icr_cpp_master += icr & 0x01UL;
--           icr >>= 0x1;
--   		adapter->icr_stat += icr & 0x01UL;
-+	if (unlikely(hw->mac_type < iegbe_82571)) {
-+		E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-+		E1000_WRITE_FLUSH(&adapter->hw);
- 	}
--#endif
-+	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+		adapter->total_tx_bytes = 0;
-+		adapter->total_tx_packets = 0;
-+		adapter->total_rx_bytes = 0;
-+		adapter->total_rx_packets = 0;
-+		__netif_rx_schedule(netdev, &adapter->napi);
-+	} else
-+		/* this really should not happen! if it does it is basically a
-+		 * bug, but not a hard error, so enable ints and continue */
-+		iegbe_irq_enable(adapter);
- 
- 	return IRQ_HANDLED;
- }
- 
--#ifdef CONFIG_E1000_NAPI
- /**
-  * iegbe_clean - NAPI Rx polling callback
-  * @adapter: board private structure
-  **/
--
--static int
--iegbe_clean(struct net_device *poll_dev, int *budget)
-+static int iegbe_clean(struct napi_struct *napi, int budget)
- {
--	struct iegbe_adapter *adapter;
--	int work_to_do = min(*budget, poll_dev->quota);
--	int tx_cleaned, i = 0, work_done = 0;
-+	struct iegbe_adapter *adapter = container_of(napi, struct iegbe_adapter, napi);
-+	struct net_device *poll_dev = adapter->netdev;
-+	int tx_cleaned = 0, work_done = 0;
- 
- 	/* Must NOT use netdev_priv macro here. */
- 	adapter = poll_dev->priv;
- 
--	/* Keep link state information with original netdev */
--    if (!netif_carrier_ok(adapter->netdev)) {
--		goto quit_polling;
--    }
--	while (poll_dev != &adapter->polling_netdev[i]) {
--		i++;
--        if (unlikely(i == adapter->num_queues)) {
--			BUG();
--	}
--    }
--
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Tx descriptors are cleaned in iegbe_intr(). No need to clean
--       them here */
--	tx_cleaned = FALSE;
--#else
--	tx_cleaned = iegbe_clean_tx_irq(adapter, &adapter->tx_ring[i]);
--#endif
--	adapter->clean_rx(adapter, &adapter->rx_ring[i],
--	                  &work_done, work_to_do);
--
--	*budget -= work_done;
--	poll_dev->quota -= work_done;
--
--	/* If no Tx and not enough Rx work done, exit the polling mode */
--	if((!tx_cleaned && (work_done == 0)) ||
--	   !netif_running(adapter->netdev)) {
--quit_polling:
--		netif_rx_complete(poll_dev);
-+	/* iegbe_clean is called per-cpu.  This lock protects
-+	 * tx_ring[0] from being cleaned by multiple cpus
-+	 * simultaneously.  A failure obtaining the lock means
-+	 * tx_ring[0] is currently being cleaned anyway. */
-+	if (spin_trylock(&adapter->tx_queue_lock)) {
-+		tx_cleaned = iegbe_clean_tx_irq(adapter,
-+						&adapter->tx_ring[0]);
-+		spin_unlock(&adapter->tx_queue_lock);
-+	}
-+
-+	adapter->clean_rx(adapter, &adapter->rx_ring[0],
-+	                  &work_done, budget);
-+
-+	if (tx_cleaned)
-+		work_done = budget;
-+
-+	/* If budget not fully consumed, exit the polling mode */
-+	if (work_done < budget) {
-+		if (likely(adapter->itr_setting & 3))
-+			iegbe_set_itr(adapter);
-+		netif_rx_complete(poll_dev, napi);
- 		iegbe_irq_enable(adapter);
--		return 0;
- 	}
- 
--	return 1;
-+	return work_done;
- }
- 
--#endif
--
--
--#ifndef IEGBE_GBE_WORKAROUND
- /**
-  * iegbe_clean_tx_irq - Reclaim resources after transmit completes
-  * @adapter: board private structure
-  **/
--
--static boolean_t
--iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-                    struct iegbe_tx_ring *tx_ring)
- {
--	struct net_device *netdev = adapter->netdev;
--	struct iegbe_tx_desc *tx_desc, *eop_desc;
--	struct iegbe_buffer *buffer_info;
--	unsigned int i, eop;
--	boolean_t cleaned = FALSE;
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+    struct iegbe_tx_desc *tx_desc, *eop_desc;
-+    struct iegbe_buffer *buffer_info;
-+    unsigned int i, eop;
-+	unsigned int count = 0;
-+	bool cleaned = false;
-+	unsigned int total_tx_bytes=0, total_tx_packets=0;
- 
--	i = tx_ring->next_to_clean;
--	eop = tx_ring->buffer_info[i].next_to_watch;
--	eop_desc = E1000_TX_DESC(*tx_ring, eop);
-+    i = tx_ring->next_to_clean;
-+    eop = tx_ring->buffer_info[i].next_to_watch;
-+    eop_desc = E1000_TX_DESC(*tx_ring, eop);
- 
- 	while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
--		/* Premature writeback of Tx descriptors clear (free buffers
--		 * and unmap pci_mapping) previous_buffer_info */
--		if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
--			iegbe_unmap_and_free_tx_resource(adapter,
--					&tx_ring->previous_buffer_info);
--		}
--
--		for (cleaned = FALSE; !cleaned; ) {
--			tx_desc = E1000_TX_DESC(*tx_ring, i);
--			buffer_info = &tx_ring->buffer_info[i];
--			cleaned = (i == eop);
--
--#ifdef NETIF_F_TSO
--			if (!(netdev->features & NETIF_F_TSO)) {
--#endif
--				iegbe_unmap_and_free_tx_resource(adapter,
--				                                 buffer_info);
--#ifdef NETIF_F_TSO
--			} else {
--				if (cleaned) {
--					memcpy(&tx_ring->previous_buffer_info,
--					       buffer_info,
--					       sizeof(struct iegbe_buffer));
--					memset(buffer_info, 0,
--					       sizeof(struct iegbe_buffer));
--				} else {
--					iegbe_unmap_and_free_tx_resource(
--					    adapter, buffer_info);
--				}
--			}
--#endif
--
--			tx_desc->buffer_addr = 0;
--			tx_desc->lower.data = 0;
-+		for (cleaned = false; !cleaned; ) {
-+            tx_desc = E1000_TX_DESC(*tx_ring, i);
-+            buffer_info = &tx_ring->buffer_info[i];
-+            cleaned = (i == eop);
-+
-+                if (cleaned) {
-+				struct sk_buff *skb = buffer_info->skb;
-+				unsigned int segs = 0, bytecount;
-+				segs = skb_shinfo(skb)->gso_segs ?: 1;
-+				bytecount = ((segs - 1) * skb_headlen(skb)) +
-+				            skb->len;
-+				total_tx_packets += segs;
-+				total_tx_bytes += bytecount;
-+                }
-+			iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
- 			tx_desc->upper.data = 0;
- 
--            if (unlikely(++i == tx_ring->count)) { i = 0; }
--		}
--
--		tx_ring->pkt++;
-+			if (unlikely(++i == tx_ring->count)) i = 0;
-+        }
- 
--		eop = tx_ring->buffer_info[i].next_to_watch;
--		eop_desc = E1000_TX_DESC(*tx_ring, eop);
--	}
-+        eop = tx_ring->buffer_info[i].next_to_watch;
-+        eop_desc = E1000_TX_DESC(*tx_ring, eop);
-+#define E1000_TX_WEIGHT 64
-+		/* weight of a sort for tx, to avoid endless transmit cleanup */
-+		if (count++ == E1000_TX_WEIGHT)
-+			break;
-+    }
- 
- 	tx_ring->next_to_clean = i;
- 
--	spin_lock(&tx_ring->tx_lock);
-+#define TX_WAKE_THRESHOLD 32
- 
--	if (unlikely(cleaned && netif_queue_stopped(netdev) &&
--            netif_carrier_ok(netdev))) {
--		netif_wake_queue(netdev);
--    }
--	spin_unlock(&tx_ring->tx_lock);
--
--	if (adapter->detect_tx_hung) {
--		/* Detect a transmit hang in hardware, this serializes the
--		 * check with the clearing of time_stamp and movement of i */
--		adapter->detect_tx_hung = FALSE;
--
--		if (tx_ring->buffer_info[i].dma &&
--		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
--		    && !(E1000_READ_REG(&adapter->hw, STATUS) &
--			E1000_STATUS_TXOFF)) {
--
--			/* detected Tx unit hang */
--			i = tx_ring->next_to_clean;
--			eop = tx_ring->buffer_info[i].next_to_watch;
--			eop_desc = E1000_TX_DESC(*tx_ring, eop);
--			DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
--					"  TDH                  <%x>\n"
--					"  TDT                  <%x>\n"
--					"  next_to_use          <%x>\n"
--					"  next_to_clean        <%x>\n"
--					"buffer_info[next_to_clean]\n"
--					"  dma                  <%zx>\n"
--					"  time_stamp           <%lx>\n"
--					"  next_to_watch        <%x>\n"
--					"  jiffies              <%lx>\n"
--					"  next_to_watch.status <%x>\n",
--				readl(adapter->hw.hw_addr + tx_ring->tdh),
--				readl(adapter->hw.hw_addr + tx_ring->tdt),
--				tx_ring->next_to_use,
--				i,
--				(size_t)tx_ring->buffer_info[i].dma,
--				tx_ring->buffer_info[i].time_stamp,
--				eop,
--				jiffies,
--				eop_desc->upper.fields.status);
--			netif_stop_queue(netdev);
-+	if (unlikely(cleaned && netif_carrier_ok(netdev) &&
-+		     E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
-+		/* Make sure that anybody stopping the queue after this
-+		 * sees the new next_to_clean.
-+		 */
-+		smp_mb();
-+		if (netif_queue_stopped(netdev)) {
-+			netif_wake_queue(netdev);
-+			++adapter->restart_queue;
- 		}
- 	}
--#ifdef NETIF_F_TSO
--	if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
--        time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) {
--		iegbe_unmap_and_free_tx_resource(
--		    adapter, &tx_ring->previous_buffer_info);
-+
-+    if (adapter->detect_tx_hung) {
-+        /* Detect a transmit hang in hardware, this serializes the
-+         * check with the clearing of time_stamp and movement of i */
-+		adapter->detect_tx_hung = false;
-+
-+		if (tx_ring->buffer_info[eop].dma &&
-+		    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
-+		               (adapter->tx_timeout_factor * HZ))
-+		    && !(E1000_READ_REG(hw, STATUS) & E1000_STATUS_TXOFF)) {
-+
-+            /* detected Tx unit hang */
-+            DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-+					"  Tx Queue             <%lu>\n"
-+                    "  TDH                  <%x>\n"
-+                    "  TDT                  <%x>\n"
-+                    "  next_to_use          <%x>\n"
-+                    "  next_to_clean        <%x>\n"
-+                    "buffer_info[next_to_clean]\n"
-+                    "  time_stamp           <%lx>\n"
-+                    "  next_to_watch        <%x>\n"
-+                    "  jiffies              <%lx>\n"
-+                    "  next_to_watch.status <%x>\n",
-+				(unsigned long)((tx_ring - adapter->tx_ring) /
-+					sizeof(struct iegbe_tx_ring)),
-+				readl(hw->hw_addr + tx_ring->tdh),
-+				readl(hw->hw_addr + tx_ring->tdt),
-+                tx_ring->next_to_use,
-+				tx_ring->next_to_clean,
-+				tx_ring->buffer_info[eop].time_stamp,
-+                eop,
-+                jiffies,
-+                eop_desc->upper.fields.status);
-+            netif_stop_queue(netdev);
-+        }
-     }
--#endif
--	return cleaned;
-+	adapter->total_tx_bytes += total_tx_bytes;
-+	adapter->total_tx_packets += total_tx_packets;
-+	adapter->net_stats.tx_bytes += total_tx_bytes;
-+	adapter->net_stats.tx_packets += total_tx_packets;
-+    return cleaned;
- }
--#endif
- 
- /**
-  * iegbe_rx_checksum - Receive Checksum Offload for 82543
-@@ -3913,192 +3689,193 @@ iegbe_clean_tx_irq(struct iegbe_adapter
-  * @sk_buff:     socket buffer with received data
-  **/
- 
--static inline void
--iegbe_rx_checksum(struct iegbe_adapter *adapter,
--		  uint32_t status_err, uint32_t csum,
--		  struct sk_buff *skb)
-+static void iegbe_rx_checksum(struct iegbe_adapter *adapter, u32 status_err,
-+			      u32 csum, struct sk_buff *skb)
- {
--	uint16_t status = (uint16_t)status_err;
--    uint8_t errors = (uint8_t)(status_err >> 0x18);
-+	struct iegbe_hw *hw = &adapter->hw;
-+	u16 status = (u16)status_err;
-+	u8 errors = (u8)(status_err >> 24);
- 	skb->ip_summed = CHECKSUM_NONE;
- 
--	/* 82543 or newer only */
--    if(unlikely(adapter->hw.mac_type < iegbe_82543))  { return; }
--	/* Ignore Checksum bit is set */
--    if(unlikely(status & E1000_RXD_STAT_IXSM)) { return; }
--	/* TCP/UDP checksum error bit is set */
--	if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
--		/* let the stack verify checksum errors */
--		adapter->hw_csum_err++;
--		return;
--	}
--	/* TCP/UDP Checksum has not been calculated */
--	if(adapter->hw.mac_type <= iegbe_82547_rev_2) {
--        if(!(status & E1000_RXD_STAT_TCPCS)) {
--			return;
-+    /* 82543 or newer only */
-+	if (unlikely(hw->mac_type < iegbe_82543)) return;
-+    /* Ignore Checksum bit is set */
-+	if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
-+    /* TCP/UDP checksum error bit is set */
-+    if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
-+        /* let the stack verify checksum errors */
-+        adapter->hw_csum_err++;
-+        return;
-+    }
-+    /* TCP/UDP Checksum has not been calculated */
-+	if (hw->mac_type <= iegbe_82547_rev_2) {
-+		if (!(status & E1000_RXD_STAT_TCPCS))
-+            return;
-+    } else {
-+		if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
-+            return;
-         }
--	} else {
--        if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) {
--			return;
--	}
-+    /* It must be a TCP or UDP packet with a valid checksum */
-+    if(likely(status & E1000_RXD_STAT_TCPCS)) {
-+        /* TCP checksum is good */
-+        skb->ip_summed = CHECKSUM_UNNECESSARY;
-+	} else if (hw->mac_type > iegbe_82547_rev_2) {
-+        /* IP fragment with UDP payload */
-+        /* Hardware complements the payload checksum, so we undo it
-+         * and then put the value in host order for further stack use.
-+         */
-+		__sum16 sum = (__force __sum16)htons(csum);
-+		skb->csum = csum_unfold(~sum);
-+		skb->ip_summed = CHECKSUM_COMPLETE;
-     }
--	/* It must be a TCP or UDP packet with a valid checksum */
--	if(likely(status & E1000_RXD_STAT_TCPCS)) {
--		/* TCP checksum is good */
--		skb->ip_summed = CHECKSUM_UNNECESSARY;
--	} else if(adapter->hw.mac_type > iegbe_82547_rev_2) {
--		/* IP fragment with UDP payload */
--		/* Hardware complements the payload checksum, so we undo it
--		 * and then put the value in host order for further stack use.
--		 */
--		csum = ntohl(csum ^ 0xFFFF);
--		skb->csum = csum;
--		skb->ip_summed = CHECKSUM_HW;
--	}
--	adapter->hw_csum_good++;
-+    adapter->hw_csum_good++;
- }
- 
- /**
-  * iegbe_clean_rx_irq - Send received data up the network stack; legacy
-  * @adapter: board private structure
-  **/
--
--static boolean_t
--#ifdef CONFIG_E1000_NAPI
--iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-                    struct iegbe_rx_ring *rx_ring,
-                    int *work_done, int work_to_do)
--#else
--iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
--                   struct iegbe_rx_ring *rx_ring)
--#endif
- {
--	struct net_device *netdev = adapter->netdev;
--	struct pci_dev *pdev = adapter->pdev;
--	struct iegbe_rx_desc *rx_desc;
--	struct iegbe_buffer *buffer_info;
--	struct sk_buff *skb;
--	unsigned long flags = 0;
--	uint32_t length;
--	uint8_t last_byte;
--	unsigned int i;
--	boolean_t cleaned = FALSE;
--
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Need to keep track of the amount of Rx descriptors that we
--       cleaned to ensure that we don't supply too many back to the
--       hardware */
--    int cleaned_count = 0;
--#endif
--
--	i = rx_ring->next_to_clean;
--	rx_desc = E1000_RX_DESC(*rx_ring, i);
--
--	while(rx_desc->status & E1000_RXD_STAT_DD) {
--		buffer_info = &rx_ring->buffer_info[i];
--#ifdef CONFIG_E1000_NAPI
--        if(*work_done >= work_to_do) {
--			break;
--        }
--		(*work_done)++;
--#endif
--		cleaned = TRUE;
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+    struct pci_dev *pdev = adapter->pdev;
-+	struct iegbe_rx_desc *rx_desc, *next_rxd;
-+	struct iegbe_buffer *buffer_info, *next_buffer;
-+	unsigned long flags;
-+	u32 length;
-+	u8 last_byte;
-+    unsigned int i;
-+	int cleaned_count = 0;
-+	bool cleaned = false;
-+	unsigned int total_rx_bytes=0, total_rx_packets=0;
- 
--#ifdef IEGBE_GBE_WORKAROUND
--        cleaned_count++;
--#endif
-+    i = rx_ring->next_to_clean;
-+    rx_desc = E1000_RX_DESC(*rx_ring, i);
-+	buffer_info = &rx_ring->buffer_info[i];
- 
--		pci_unmap_single(pdev,
--		                 buffer_info->dma,
--		                 buffer_info->length,
--		                 PCI_DMA_FROMDEVICE);
-+    while(rx_desc->status & E1000_RXD_STAT_DD) {
-+		struct sk_buff *skb;
-+		u8 status;
-+		if (*work_done >= work_to_do)
-+            break;
-+        (*work_done)++;
- 
-+		status = rx_desc->status;
- 		skb = buffer_info->skb;
--		length = le16_to_cpu(rx_desc->length);
-+		buffer_info->skb = NULL;
-+		prefetch(skb->data - NET_IP_ALIGN);
-+		if (++i == rx_ring->count) i = 0;
-+		next_rxd = E1000_RX_DESC(*rx_ring, i);
-+		prefetch(next_rxd);
-+		next_buffer = &rx_ring->buffer_info[i];
-+		cleaned = true;
-+		cleaned_count++;
-+        pci_unmap_single(pdev,
-+                         buffer_info->dma,
-+                         buffer_info->length,
-+                         PCI_DMA_FROMDEVICE);
-+
-+        length = le16_to_cpu(rx_desc->length);
-+
-+		if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
-+            /* All receives must fit into a single buffer */
-+            E1000_DBG("%s: Receive packet consumed multiple"
-+                  " buffers\n", netdev->name);
-+			buffer_info->skb = skb;
-+            goto next_desc;
-+        }
- 
--		if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
--			/* All receives must fit into a single buffer */
--			E1000_DBG("%s: Receive packet consumed multiple"
--				  " buffers\n", netdev->name);
--			dev_kfree_skb_irq(skb);
--			goto next_desc;
--		}
-+        if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
-+			last_byte = *(skb->data + length - 1);
-+			if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
-+				       last_byte)) {
-+                spin_lock_irqsave(&adapter->stats_lock, flags);
-+				iegbe_tbi_adjust_stats(hw, &adapter->stats,
-+                                       length, skb->data);
-+                spin_unlock_irqrestore(&adapter->stats_lock,
-+                                       flags);
-+                length--;
-+            } else {
-+				buffer_info->skb = skb;
-+                goto next_desc;
-+            }
-+        }
- 
--		if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
--            last_byte = *(skb->data + length - 0x1);
--			if(TBI_ACCEPT(&adapter->hw, rx_desc->status,
--			              rx_desc->errors, length, last_byte)) {
--				spin_lock_irqsave(&adapter->stats_lock, flags);
--				iegbe_tbi_adjust_stats(&adapter->hw,
--				                       &adapter->stats,
--				                       length, skb->data);
--				spin_unlock_irqrestore(&adapter->stats_lock,
--				                       flags);
--				length--;
--			} else {
--				dev_kfree_skb_irq(skb);
--				goto next_desc;
-+		/* adjust length to remove Ethernet CRC, this must be
-+		 * done after the TBI_ACCEPT workaround above */
-+		length -= 4;
-+
-+		/* probably a little skewed due to removing CRC */
-+		total_rx_bytes += length;
-+		total_rx_packets++;
-+
-+		/* code added for copybreak, this should improve
-+		 * performance for small packets with large amounts
-+		 * of reassembly being done in the stack */
-+		if (length < copybreak) {
-+			struct sk_buff *new_skb =
-+			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
-+			if (new_skb) {
-+				skb_reserve(new_skb, NET_IP_ALIGN);
-+				skb_copy_to_linear_data_offset(new_skb,
-+							       -NET_IP_ALIGN,
-+							       (skb->data -
-+							        NET_IP_ALIGN),
-+							       (length +
-+							        NET_IP_ALIGN));
-+				/* save the skb in buffer_info as good */
-+				buffer_info->skb = skb;
-+				skb = new_skb;
- 			}
-+			/* else just continue with the old one */
- 		}
--
--		/* Good Receive */
--		skb_put(skb, length - ETHERNET_FCS_SIZE);
-+        /* Good Receive */
-+		skb_put(skb, length);
- 
- 		/* Receive Checksum Offload */
- 		iegbe_rx_checksum(adapter,
--				  (uint32_t)(rx_desc->status) |
--                  ((uint32_t)(rx_desc->errors) << 0x18),
--				  rx_desc->csum, skb);
-+				  (u32)(status) |
-+				  ((u32)(rx_desc->errors) << 24),
-+				  le16_to_cpu(rx_desc->csum), skb);
-+
- 		skb->protocol = eth_type_trans(skb, netdev);
--#ifdef CONFIG_E1000_NAPI
--#ifdef NETIF_F_HW_VLAN_TX
--		if(unlikely(adapter->vlgrp &&
--			    (rx_desc->status & E1000_RXD_STAT_VP))) {
-+
-+		if (unlikely(adapter->vlgrp &&
-+			    (status & E1000_RXD_STAT_VP))) {
- 			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--						 le16_to_cpu(rx_desc->special) &
--						 E1000_RXD_SPC_VLAN_MASK);
-+						 le16_to_cpu(rx_desc->special));
- 		} else {
- 			netif_receive_skb(skb);
- 		}
--#else
--		netif_receive_skb(skb);
--#endif
--#else /* CONFIG_E1000_NAPI */
--#ifdef NETIF_F_HW_VLAN_TX
--		if(unlikely(adapter->vlgrp &&
--			    (rx_desc->status & E1000_RXD_STAT_VP))) {
--			vlan_hwaccel_rx(skb, adapter->vlgrp,
--					le16_to_cpu(rx_desc->special) &
--					E1000_RXD_SPC_VLAN_MASK);
--		} else {
--			netif_rx(skb);
--		}
--#else
--		netif_rx(skb);
--#endif
--#endif /* CONFIG_E1000_NAPI */
-+
- 		netdev->last_rx = jiffies;
--		rx_ring->pkt++;
- 
- next_desc:
- 		rx_desc->status = 0;
--		buffer_info->skb = NULL;
--        if(unlikely(++i == rx_ring->count)) { i = 0; }
- 
--		rx_desc = E1000_RX_DESC(*rx_ring, i);
-+		/* return some buffers to hardware, one at a time is too slow */
-+		if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
-+			adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+			cleaned_count = 0;
-+		}
-+
-+		/* use prefetched values */
-+		rx_desc = next_rxd;
-+		buffer_info = next_buffer;
- 	}
- 	rx_ring->next_to_clean = i;
- 
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Only allocate the number of buffers that we have actually
--       cleaned! */
--    if (cleaned_count) {
--        adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
--    }
--#else
--	adapter->alloc_rx_buf(adapter, rx_ring);
--#endif
--
-+	cleaned_count = E1000_DESC_UNUSED(rx_ring);
-+	if (cleaned_count)
-+		adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+
-+	adapter->total_rx_packets += total_rx_packets;
-+	adapter->total_rx_bytes += total_rx_bytes;
-+	adapter->net_stats.rx_bytes += total_rx_bytes;
-+	adapter->net_stats.rx_packets += total_rx_packets;
- 	return cleaned;
- }
- 
-@@ -4107,161 +3884,153 @@ next_desc:
-  * @adapter: board private structure
-  **/
- 
--static boolean_t
--#ifdef CONFIG_E1000_NAPI
--iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-                       struct iegbe_rx_ring *rx_ring,
-                       int *work_done, int work_to_do)
--#else
--iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
--                      struct iegbe_rx_ring *rx_ring)
--#endif
- {
--	union iegbe_rx_desc_packet_split *rx_desc;
--	struct net_device *netdev = adapter->netdev;
--	struct pci_dev *pdev = adapter->pdev;
--	struct iegbe_buffer *buffer_info;
--	struct iegbe_ps_page *ps_page;
--	struct iegbe_ps_page_dma *ps_page_dma;
--	struct sk_buff *skb;
--	unsigned int i, j;
--	uint32_t length, staterr;
--	boolean_t cleaned = FALSE;
--
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Need to keep track of the amount of Rx descriptors that we
--       cleaned to ensure that we don't supply too many back to the
--       hardware */
--    int cleaned_count = 0;
--#endif
--
--	i = rx_ring->next_to_clean;
--	rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
--	staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
--
--	while(staterr & E1000_RXD_STAT_DD) {
--		buffer_info = &rx_ring->buffer_info[i];
--		ps_page = &rx_ring->ps_page[i];
--		ps_page_dma = &rx_ring->ps_page_dma[i];
--#ifdef CONFIG_E1000_NAPI
--        if(unlikely(*work_done >= work_to_do)) {
--			break;
--        }
--		(*work_done)++;
--#endif
--		cleaned = TRUE;
--
--#ifdef IEGBE_GBE_WORKAROUND
--        cleaned_count++;
--#endif
-+	union iegbe_rx_desc_packet_split *rx_desc, *next_rxd;
-+    struct net_device *netdev = adapter->netdev;
-+    struct pci_dev *pdev = adapter->pdev;
-+	struct iegbe_buffer *buffer_info, *next_buffer;
-+    struct iegbe_ps_page *ps_page;
-+    struct iegbe_ps_page_dma *ps_page_dma;
-+    struct sk_buff *skb;
-+    unsigned int i, j;
-+	u32 length, staterr;
-+	int cleaned_count = 0;
-+	bool cleaned = false;
-+	unsigned int total_rx_bytes=0, total_rx_packets=0;
-+
-+    i = rx_ring->next_to_clean;
-+    rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-+    staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
-+	buffer_info = &rx_ring->buffer_info[i];
- 
--		pci_unmap_single(pdev, buffer_info->dma,
--				 buffer_info->length,
--				 PCI_DMA_FROMDEVICE);
-+    while(staterr & E1000_RXD_STAT_DD) {
-+        ps_page = &rx_ring->ps_page[i];
-+        ps_page_dma = &rx_ring->ps_page_dma[i];
-+
-+		if (unlikely(*work_done >= work_to_do))
-+            break;
-+        (*work_done)++;
- 
- 		skb = buffer_info->skb;
-+		prefetch(skb->data - NET_IP_ALIGN);
-+		if (++i == rx_ring->count) i = 0;
-+		next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
-+		prefetch(next_rxd);
-+		next_buffer = &rx_ring->buffer_info[i];
-+		cleaned = true;
-+		cleaned_count++;
-+        pci_unmap_single(pdev, buffer_info->dma,
-+                 buffer_info->length,
-+                 PCI_DMA_FROMDEVICE);
-+
-+        if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
-+            E1000_DBG("%s: Packet Split buffers didn't pick up"
-+                  " the full packet\n", netdev->name);
-+            dev_kfree_skb_irq(skb);
-+            goto next_desc;
-+        }
- 
--		if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
--			E1000_DBG("%s: Packet Split buffers didn't pick up"
--				  " the full packet\n", netdev->name);
--			dev_kfree_skb_irq(skb);
--			goto next_desc;
--		}
--
--		if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
--			dev_kfree_skb_irq(skb);
--			goto next_desc;
--		}
--
--		length = le16_to_cpu(rx_desc->wb.middle.length0);
-+        if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
-+            dev_kfree_skb_irq(skb);
-+            goto next_desc;
-+        }
- 
--		if(unlikely(!length)) {
--			E1000_DBG("%s: Last part of the packet spanning"
--				  " multiple descriptors\n", netdev->name);
--			dev_kfree_skb_irq(skb);
--			goto next_desc;
--		}
-+        length = le16_to_cpu(rx_desc->wb.middle.length0);
- 
--		/* Good Receive */
--		skb_put(skb, length);
--
--		for(j = 0; j < adapter->rx_ps_pages; j++) {
--            if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) {
--				break;
--            }
--			pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
--					PAGE_SIZE, PCI_DMA_FROMDEVICE);
--			ps_page_dma->ps_page_dma[j] = 0;
--			skb_shinfo(skb)->frags[j].page =
--				ps_page->ps_page[j];
--			ps_page->ps_page[j] = NULL;
--			skb_shinfo(skb)->frags[j].page_offset = 0;
--			skb_shinfo(skb)->frags[j].size = length;
--			skb_shinfo(skb)->nr_frags++;
--			skb->len += length;
--			skb->data_len += length;
--		}
-+        if(unlikely(!length)) {
-+            E1000_DBG("%s: Last part of the packet spanning"
-+                  " multiple descriptors\n", netdev->name);
-+            dev_kfree_skb_irq(skb);
-+            goto next_desc;
-+        }
- 
--		iegbe_rx_checksum(adapter, staterr,
--				  rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
--		skb->protocol = eth_type_trans(skb, netdev);
-+        /* Good Receive */
-+        skb_put(skb, length);
- 
--		if(likely(rx_desc->wb.upper.header_status &
--			  E1000_RXDPS_HDRSTAT_HDRSP)) {
--			adapter->rx_hdr_split++;
--#ifdef HAVE_RX_ZERO_COPY
--			skb_shinfo(skb)->zero_copy = TRUE;
--#endif
--	        }
--#ifdef CONFIG_E1000_NAPI
--#ifdef NETIF_F_HW_VLAN_TX
--		if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
--			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--				le16_to_cpu(rx_desc->wb.middle.vlan) &
--				E1000_RXD_SPC_VLAN_MASK);
--		} else {
--			netif_receive_skb(skb);
--		}
--#else
--		netif_receive_skb(skb);
--#endif
--#else /* CONFIG_E1000_NAPI */
--#ifdef NETIF_F_HW_VLAN_TX
--		if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
--			vlan_hwaccel_rx(skb, adapter->vlgrp,
--				le16_to_cpu(rx_desc->wb.middle.vlan) &
--				E1000_RXD_SPC_VLAN_MASK);
--		} else {
--			netif_rx(skb);
--		}
--#else
--		netif_rx(skb);
--#endif
--#endif /* CONFIG_E1000_NAPI */
--		netdev->last_rx = jiffies;
--		rx_ring->pkt++;
-+		{
-+		int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
-+		if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
-+			u8 *vaddr;
-+			pci_dma_sync_single_for_cpu(pdev,
-+				ps_page_dma->ps_page_dma[0],
-+				PAGE_SIZE,
-+				PCI_DMA_FROMDEVICE);
-+			vaddr = kmap_atomic(ps_page->ps_page[0],
-+			                    KM_SKB_DATA_SOFTIRQ);
-+			memcpy(skb_tail_pointer(skb), vaddr, l1);
-+			kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
-+			pci_dma_sync_single_for_device(pdev,
-+				ps_page_dma->ps_page_dma[0],
-+				PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+			l1 -= 4;
-+			skb_put(skb, l1);
-+			goto copydone;
-+		} /* if */
-+		}
-+		for (j = 0; j < adapter->rx_ps_pages; j++) {
-+			length = le16_to_cpu(rx_desc->wb.upper.length[j]);
-+			if (!length)
-+                break;
-+            pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
-+                    PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+			ps_page_dma->ps_page_dma[j] = 0;
-+			skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
-+			                   length);
-+            ps_page->ps_page[j] = NULL;
-+            skb->len += length;
-+            skb->data_len += length;
-+			skb->truesize += length;
-+        }
- 
--next_desc:
--		rx_desc->wb.middle.status_error &= ~0xFF;
--		buffer_info->skb = NULL;
--        if(unlikely(++i == rx_ring->count)) { i = 0; }
-+		pskb_trim(skb, skb->len - 4);
-+copydone:
-+		total_rx_bytes += skb->len;
-+		total_rx_packets++;
-+        iegbe_rx_checksum(adapter, staterr,
-+				  le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
-+        skb->protocol = eth_type_trans(skb, netdev);
-+
-+        if(likely(rx_desc->wb.upper.header_status &
-+			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
-+            adapter->rx_hdr_split++;
-+
-+        if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-+            vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-+				le16_to_cpu(rx_desc->wb.middle.vlan));
-+        } else {
-+            netif_receive_skb(skb);
-+        }
- 
--		rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
--		staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
--	}
--	rx_ring->next_to_clean = i;
-+        netdev->last_rx = jiffies;
- 
--#ifdef IEGBE_GBE_WORKAROUND
--    /* Only allocate the number of buffers that we have actually
--       cleaned! */
--    if (cleaned_count) {
--        adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
--    }
--#else
--	adapter->alloc_rx_buf(adapter, rx_ring);
--#endif
-+next_desc:
-+		rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
-+        buffer_info->skb = NULL;
- 
--	return cleaned;
-+		if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
-+			adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+			cleaned_count = 0;
-+		}
-+
-+		/* use prefetched values */
-+		rx_desc = next_rxd;
-+		buffer_info = next_buffer;
-+        staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
-+    }
-+    rx_ring->next_to_clean = i;
-+
-+	cleaned_count = E1000_DESC_UNUSED(rx_ring);
-+	if (cleaned_count)
-+		adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+
-+	adapter->total_rx_packets += total_rx_packets;
-+	adapter->total_rx_bytes += total_rx_bytes;
-+	adapter->net_stats.rx_bytes += total_rx_bytes;
-+	adapter->net_stats.rx_packets += total_rx_packets;
-+    return cleaned;
- }
- 
- /**
-@@ -4269,142 +4038,115 @@ next_desc:
-  * @adapter: address of board private structure
-  **/
- 
--#ifdef IEGBE_GBE_WORKAROUND
--static void
--iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-+
-+static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-                        struct iegbe_rx_ring *rx_ring,
-                        int cleaned_count)
--#else
--static void
--iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
--                       struct iegbe_rx_ring *rx_ring)
--#endif
- {
--	struct net_device *netdev = adapter->netdev;
--	struct pci_dev *pdev = adapter->pdev;
--	struct iegbe_rx_desc *rx_desc;
--	struct iegbe_buffer *buffer_info;
--	struct sk_buff *skb;
--	unsigned int i;
--	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
--
--	i = rx_ring->next_to_use;
--	buffer_info = &rx_ring->buffer_info[i];
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+    struct pci_dev *pdev = adapter->pdev;
-+    struct iegbe_rx_desc *rx_desc;
-+    struct iegbe_buffer *buffer_info;
-+    struct sk_buff *skb;
-+    unsigned int i;
-+    unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
- 
--#ifdef IEGBE_GBE_WORKAROUND
--    if (cleaned_count > IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS) {
--	  adapter->stats.cc_gt_num_rx++;
--    }
--	while(cleaned_count-- && !buffer_info->skb) {
--#else
--	while(!buffer_info->skb) {
--#endif
--		skb = dev_alloc_skb(bufsz);
-+    i = rx_ring->next_to_use;
-+    buffer_info = &rx_ring->buffer_info[i];
- 
--		if(unlikely(!skb)) {
--			/* Better luck next round */
--			break;
--		}
-+	while (cleaned_count--) {
-+		skb = buffer_info->skb;
-+		if (skb) {
-+			skb_trim(skb, 0);
-+			goto map_skb;
-+		}
-+		skb = netdev_alloc_skb(netdev, bufsz);
-+
-+        if(unlikely(!skb)) {
-+            /* Better luck next round */
-+			adapter->alloc_rx_buff_failed++;
-+            break;
-+        }
- 
--		/* Fix for errata 23, can't cross 64kB boundary */
--		if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
--			struct sk_buff *oldskb = skb;
--			DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
--					     "at %p\n", bufsz, skb->data);
--			/* Try again, without freeing the previous */
--			skb = dev_alloc_skb(bufsz);
--			/* Failed allocation, critical failure */
--			if(!skb) {
--				dev_kfree_skb(oldskb);
--				break;
--			}
-+        /* Fix for errata 23, can't cross 64kB boundary */
-+        if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-+            struct sk_buff *oldskb = skb;
-+            DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
-+                         "at %p\n", bufsz, skb->data);
-+            /* Try again, without freeing the previous */
-+			skb = netdev_alloc_skb(netdev, bufsz);
-+            /* Failed allocation, critical failure */
-+            if(!skb) {
-+                dev_kfree_skb(oldskb);
-+                break;
-+            }
- 
--			if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
--				/* give up */
--				dev_kfree_skb(skb);
--				dev_kfree_skb(oldskb);
--				break; /* while !buffer_info->skb */
--			} else {
--				/* Use new allocation */
--				dev_kfree_skb(oldskb);
-+            if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-+                /* give up */
-+                dev_kfree_skb(skb);
-+                dev_kfree_skb(oldskb);
-+                break; /* while !buffer_info->skb */
- 			}
--		}
--		/* Make buffer alignment 2 beyond a 16 byte boundary
--		 * this will result in a 16 byte aligned IP header after
--		 * the 14 byte MAC header is removed
--		 */
--		skb_reserve(skb, NET_IP_ALIGN);
--
--		skb->dev = netdev;
--
--		buffer_info->skb = skb;
--		buffer_info->length = adapter->rx_buffer_len;
--		buffer_info->dma = pci_map_single(pdev,
--						  skb->data,
--						  adapter->rx_buffer_len,
--						  PCI_DMA_FROMDEVICE);
--
--		/* Fix for errata 23, can't cross 64kB boundary */
--		if(!iegbe_check_64k_bound(adapter,
--					(void *)(unsigned long)buffer_info->dma,
--					adapter->rx_buffer_len)) {
--			DPRINTK(RX_ERR, ERR,
--				"dma align check failed: %u bytes at %p\n",
--				adapter->rx_buffer_len,
--				(void *)(unsigned long)buffer_info->dma);
--			dev_kfree_skb(skb);
--			buffer_info->skb = NULL;
--
--			pci_unmap_single(pdev, buffer_info->dma,
--					 adapter->rx_buffer_len,
--					 PCI_DMA_FROMDEVICE);
--
--			break; /* while !buffer_info->skb */
--		}
--		rx_desc = E1000_RX_DESC(*rx_ring, i);
--		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
--
--#ifdef IEGBE_GBE_WORKAROUND_DISABLED
--        adapter->stats.num_rx_buf_alloc++;
-+                /* Use new allocation */
-+                dev_kfree_skb(oldskb);
-+            }
-+        /* Make buffer alignment 2 beyond a 16 byte boundary
-+         * this will result in a 16 byte aligned IP header after
-+         * the 14 byte MAC header is removed
-+         */
-+        skb_reserve(skb, NET_IP_ALIGN);
-+
-+
-+        buffer_info->skb = skb;
-+        buffer_info->length = adapter->rx_buffer_len;
-+map_skb:
-+        buffer_info->dma = pci_map_single(pdev,
-+                          skb->data,
-+                          adapter->rx_buffer_len,
-+                          PCI_DMA_FROMDEVICE);
-+
-+        /* Fix for errata 23, can't cross 64kB boundary */
-+        if(!iegbe_check_64k_bound(adapter,
-+                    (void *)(unsigned long)buffer_info->dma,
-+                    adapter->rx_buffer_len)) {
-+            DPRINTK(RX_ERR, ERR,
-+                "dma align check failed: %u bytes at %p\n",
-+                adapter->rx_buffer_len,
-+                (void *)(unsigned long)buffer_info->dma);
-+            dev_kfree_skb(skb);
-+            buffer_info->skb = NULL;
-+
-+            pci_unmap_single(pdev, buffer_info->dma,
-+                     adapter->rx_buffer_len,
-+                     PCI_DMA_FROMDEVICE);
- 
--        /* Force memory writes to complete before letting h/w
--         * know there are new descriptors to fetch.  (Only
--         * applicable for weak-ordered memory model archs,
--         * such as IA-64). */
--        wmb();
--        writel(i, adapter->hw.hw_addr + rx_ring->rdt);
-+            break; /* while !buffer_info->skb */
-+        }
-+        rx_desc = E1000_RX_DESC(*rx_ring, i);
-+        rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
- 
--#endif
--#ifndef IEGBE_GBE_WORKAROUND
--        if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
--			/* Force memory writes to complete before letting h/w
--			 * know there are new descriptors to fetch.  (Only
--			 * applicable for weak-ordered memory model archs,
--			 * such as IA-64). */
--			wmb();
--			writel(i, adapter->hw.hw_addr + rx_ring->rdt);
--		}
--#endif
--        if(unlikely(++i == rx_ring->count)) { i = 0; }
--		buffer_info = &rx_ring->buffer_info[i];
--	}
-+            /* Force memory writes to complete before letting h/w
-+             * know there are new descriptors to fetch.  (Only
-+             * applicable for weak-ordered memory model archs,
-+             * such as IA-64). */
-+		if (unlikely(++i == rx_ring->count))
-+			i = 0;
-+        buffer_info = &rx_ring->buffer_info[i];
-+    }
- 
--#ifdef IEGBE_GBE_WORKAROUND
- 	if (likely(rx_ring->next_to_use != i)) {
--		rx_ring->next_to_use = i;
--        if (unlikely(i-- == 0)) {
--            i = (rx_ring->count - 0x1);
--          }
-+    rx_ring->next_to_use = i;
-+		if (unlikely(i-- == 0))
-+			i = (rx_ring->count - 1);
-+
- 		/* Force memory writes to complete before letting h/w
- 		 * know there are new descriptors to fetch.  (Only
- 		 * applicable for weak-ordered memory model archs,
- 		 * such as IA-64). */
- 		wmb();
--		writel(i, adapter->hw.hw_addr + rx_ring->rdt);
-+		writel(i, hw->hw_addr + rx_ring->rdt);
- 	}
--#else
--	rx_ring->next_to_use = i;
--#endif
- }
- 
- /**
-@@ -4412,49 +4154,41 @@ iegbe_alloc_rx_buffers(struct iegbe_adap
-  * @adapter: address of board private structure
-  **/
- 
--#ifdef IEGBE_GBE_WORKAROUND
--static void
--iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-+
-+static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-                           struct iegbe_rx_ring *rx_ring,
-                           int cleaned_count)
--#else
--static void
--iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
--                          struct iegbe_rx_ring *rx_ring)
--#endif
- {
--	struct net_device *netdev = adapter->netdev;
--	struct pci_dev *pdev = adapter->pdev;
--	union iegbe_rx_desc_packet_split *rx_desc;
--	struct iegbe_buffer *buffer_info;
--	struct iegbe_ps_page *ps_page;
--	struct iegbe_ps_page_dma *ps_page_dma;
--	struct sk_buff *skb;
--	unsigned int i, j;
--
--	i = rx_ring->next_to_use;
--	buffer_info = &rx_ring->buffer_info[i];
--	ps_page = &rx_ring->ps_page[i];
--	ps_page_dma = &rx_ring->ps_page_dma[i];
-+	struct iegbe_hw *hw = &adapter->hw;
-+    struct net_device *netdev = adapter->netdev;
-+    struct pci_dev *pdev = adapter->pdev;
-+    union iegbe_rx_desc_packet_split *rx_desc;
-+    struct iegbe_buffer *buffer_info;
-+    struct iegbe_ps_page *ps_page;
-+    struct iegbe_ps_page_dma *ps_page_dma;
-+    struct sk_buff *skb;
-+    unsigned int i, j;
-+
-+    i = rx_ring->next_to_use;
-+    buffer_info = &rx_ring->buffer_info[i];
-+    ps_page = &rx_ring->ps_page[i];
-+    ps_page_dma = &rx_ring->ps_page_dma[i];
- 
--#ifdef IEGBE_GBE_WORKAROUND
--	while(cleaned_count-- && !buffer_info->skb) {
--#else
--	while(!buffer_info->skb) {
--#endif
--		rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-+	while (cleaned_count--) {
-+        rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
- 
- 		for (j = 0; j < PS_PAGE_BUFFERS; j++) {
--			if (j < adapter->rx_ps_pages) {
--				if (likely(!ps_page->ps_page[j])) {
--					ps_page->ps_page[j] =
--						alloc_page(GFP_ATOMIC);
-+            if (j < adapter->rx_ps_pages) {
-+                if (likely(!ps_page->ps_page[j])) {
-+                    ps_page->ps_page[j] =
-+                        alloc_page(GFP_ATOMIC);
-                     if (unlikely(!ps_page->ps_page[j])) {
--						goto no_buffers;
-+						adapter->alloc_rx_buff_failed++;
-+                        goto no_buffers;
-                     }
--					ps_page_dma->ps_page_dma[j] =
--						pci_map_page(pdev,
--							    ps_page->ps_page[j],
-+                    ps_page_dma->ps_page_dma[j] =
-+                        pci_map_page(pdev,
-+                                ps_page->ps_page[j],
- 							    0, PAGE_SIZE,
- 							    PCI_DMA_FROMDEVICE);
- 				}
-@@ -4462,26 +4196,26 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
- 				 * change because each write-back erases
- 				 * this info.
- 				 */
--                rx_desc->read.buffer_addr[j+0x1] =
-+				rx_desc->read.buffer_addr[j+1] =
- 				     cpu_to_le64(ps_page_dma->ps_page_dma[j]);
--            } else {
--                rx_desc->read.buffer_addr[j+0x1] = ~0;
--            }
-+			} else
-+				rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
- 		}
- 
--		skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
-+		skb = netdev_alloc_skb(netdev,
-+		                       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
- 
--        if (unlikely(!skb)) {
-+		if (unlikely(!skb)) {
-+			adapter->alloc_rx_buff_failed++;
- 			break;
--        }
-+		}
-+
- 		/* Make buffer alignment 2 beyond a 16 byte boundary
- 		 * this will result in a 16 byte aligned IP header after
- 		 * the 14 byte MAC header is removed
- 		 */
- 		skb_reserve(skb, NET_IP_ALIGN);
- 
--		skb->dev = netdev;
--
- 		buffer_info->skb = skb;
- 		buffer_info->length = adapter->rx_ps_bsize0;
- 		buffer_info->dma = pci_map_single(pdev, skb->data,
-@@ -4490,27 +4224,28 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
- 
- 		rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
- 
--        if (unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
--			/* Force memory writes to complete before letting h/w
--			 * know there are new descriptors to fetch.  (Only
--			 * applicable for weak-ordered memory model archs,
--			 * such as IA-64). */
--			wmb();
--			/* Hardware increments by 16 bytes, but packet split
--			 * descriptors are 32 bytes...so we increment tail
--			 * twice as much.
--			 */
--			writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
--		}
--
--        if (unlikely(++i == rx_ring->count)) { i = 0; }
-+		if (unlikely(++i == rx_ring->count)) i = 0;
- 		buffer_info = &rx_ring->buffer_info[i];
- 		ps_page = &rx_ring->ps_page[i];
- 		ps_page_dma = &rx_ring->ps_page_dma[i];
- 	}
- 
- no_buffers:
--	rx_ring->next_to_use = i;
-+	if (likely(rx_ring->next_to_use != i)) {
-+    rx_ring->next_to_use = i;
-+		if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
-+
-+		/* Force memory writes to complete before letting h/w
-+		 * know there are new descriptors to fetch.  (Only
-+		 * applicable for weak-ordered memory model archs,
-+		 * such as IA-64). */
-+		wmb();
-+		/* Hardware increments by 16 bytes, but packet split
-+		 * descriptors are 32 bytes...so we increment tail
-+		 * twice as much.
-+		 */
-+		writel(i<<1, hw->hw_addr + rx_ring->rdt);
-+	}
- }
- 
- /**
-@@ -4521,52 +4256,52 @@ no_buffers:
- static void
- iegbe_smartspeed(struct iegbe_adapter *adapter)
- {
--	uint16_t phy_status;
--	uint16_t phy_ctrl;
-+    uint16_t phy_status;
-+    uint16_t phy_ctrl;
- 
--	if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
-+    if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
-        !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL)) {
--		return;
-+        return;
-     }
--	if(adapter->smartspeed == 0) {
--		/* If Master/Slave config fault is asserted twice,
--		 * we assume back-to-back */
--		iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-+    if(adapter->smartspeed == 0x0) {
-+        /* If Master/Slave config fault is asserted twice,
-+         * we assume back-to-back */
-+        iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-         if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
--		iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-+        iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-         if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
--		iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
--		if(phy_ctrl & CR_1000T_MS_ENABLE) {
--			phy_ctrl &= ~CR_1000T_MS_ENABLE;
--			iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
--					    phy_ctrl);
--			adapter->smartspeed++;
--			if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
--			   !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
--				   	       &phy_ctrl)) {
--				phy_ctrl |= (MII_CR_AUTO_NEG_EN |
--					     MII_CR_RESTART_AUTO_NEG);
--				iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
--						    phy_ctrl);
--			}
--		}
--		return;
--	} else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
--		/* If still no link, perhaps using 2/3 pair cable */
--		iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
--		phy_ctrl |= CR_1000T_MS_ENABLE;
--		iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
--		if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
--		   !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
--			phy_ctrl |= (MII_CR_AUTO_NEG_EN |
--				     MII_CR_RESTART_AUTO_NEG);
--			iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
--		}
--	}
--	/* Restart process after E1000_SMARTSPEED_MAX iterations */
-+        iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-+        if(phy_ctrl & CR_1000T_MS_ENABLE) {
-+            phy_ctrl &= ~CR_1000T_MS_ENABLE;
-+            iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
-+                        phy_ctrl);
-+            adapter->smartspeed++;
-+            if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-+               !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
-+                              &phy_ctrl)) {
-+                phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-+                         MII_CR_RESTART_AUTO_NEG);
-+                iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
-+                            phy_ctrl);
-+            }
-+        }
-+        return;
-+    } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
-+        /* If still no link, perhaps using 2/3 pair cable */
-+        iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-+        phy_ctrl |= CR_1000T_MS_ENABLE;
-+        iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
-+        if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-+           !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
-+            phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-+                     MII_CR_RESTART_AUTO_NEG);
-+            iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
-+        }
-+    }
-+    /* Restart process after E1000_SMARTSPEED_MAX iterations */
-     if(adapter->smartspeed++ == E1000_SMARTSPEED_MAX) {
--		adapter->smartspeed = 0;
--}
-+        adapter->smartspeed = 0x0;
-+    }
- }
- 
- /**
-@@ -4576,23 +4311,22 @@ iegbe_smartspeed(struct iegbe_adapter *a
-  * @cmd:
-  **/
- 
--static int
--iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-+static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
- {
--	switch (cmd) {
-+    switch (cmd) {
- #ifdef SIOCGMIIPHY
--	case SIOCGMIIPHY:
--	case SIOCGMIIREG:
--	case SIOCSMIIREG:
--		return iegbe_mii_ioctl(netdev, ifr, cmd);
-+    case SIOCGMIIPHY:
-+    case SIOCGMIIREG:
-+    case SIOCSMIIREG:
-+        return iegbe_mii_ioctl(netdev, ifr, cmd);
- #endif
- #ifdef ETHTOOL_OPS_COMPAT
--	case SIOCETHTOOL:
--		return ethtool_ioctl(ifr);
-+    case SIOCETHTOOL:
-+        return ethtool_ioctl(ifr);
- #endif
--	default:
--		return -EOPNOTSUPP;
--	}
-+    default:
-+        return -EOPNOTSUPP;
-+    }
- }
- 
- #ifdef SIOCGMIIPHY
-@@ -4603,534 +4337,510 @@ iegbe_ioctl(struct net_device *netdev, s
-  * @cmd:
-  **/
- 
--static int
--iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-+static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
-+			   int cmd)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	struct mii_ioctl_data *data = if_mii(ifr);
--	int retval;
--	uint16_t mii_reg;
--	uint16_t spddplx;
--	unsigned long flags;
--
--	if((adapter->hw.media_type == iegbe_media_type_oem &&
--           !iegbe_oem_phy_is_copper(&adapter->hw)) ||
--        adapter->hw.media_type == iegbe_media_type_fiber ||
--        adapter->hw.media_type == iegbe_media_type_internal_serdes ) {
--		return -EOPNOTSUPP;
--    }
--	switch (cmd) {
--	case SIOCGMIIPHY:
--		data->phy_id = adapter->hw.phy_addr;
--		break;
--	case SIOCGMIIREG:
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    struct mii_ioctl_data *data = if_mii(ifr);
-+    int retval;
-+    uint16_t mii_reg;
-+    uint16_t spddplx;
-+    unsigned long flags = 0;
-+
-+    if((adapter->hw.media_type == iegbe_media_type_oem
-+        && !iegbe_oem_phy_is_copper(&adapter->hw))
-+       ||adapter->hw.media_type != iegbe_media_type_copper) {
-+        return -EOPNOTSUPP;
-+    }
-+    switch (cmd) {
-+    case SIOCGMIIPHY:
-+        data->phy_id = adapter->hw.phy_addr;
-+        break;
-+    case SIOCGMIIREG:
-         if(!capable(CAP_NET_ADMIN)) {
--			return -EPERM;
-+            return -EPERM;
-         }
--		spin_lock_irqsave(&adapter->stats_lock, flags);
--		if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
--				   &data->val_out)) {
--			spin_unlock_irqrestore(&adapter->stats_lock, flags);
--			return -EIO;
--		}
--		spin_unlock_irqrestore(&adapter->stats_lock, flags);
--		break;
--	case SIOCSMIIREG:
-+        spin_lock_irqsave(&adapter->stats_lock, flags);
-+        if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-+                   &data->val_out)) {
-+            spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+            return -EIO;
-+        }
-+        spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+        break;
-+    case SIOCSMIIREG:
-         if(!capable(CAP_NET_ADMIN)){
--			return -EPERM;
-+            return -EPERM;
-         }
-         if(data->reg_num & ~(0x1F)) {
--			return -EFAULT;
-+            return -EFAULT;
-         }
--		mii_reg = data->val_in;
--		spin_lock_irqsave(&adapter->stats_lock, flags);
--		if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
--					mii_reg)) {
--			spin_unlock_irqrestore(&adapter->stats_lock, flags);
--			return -EIO;
--		}
--		switch(adapter->hw.phy_type) {
--		case iegbe_phy_m88:
--			switch (data->reg_num) {
--			case PHY_CTRL:
-+        mii_reg = data->val_in;
-+        spin_lock_irqsave(&adapter->stats_lock, flags);
-+        if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
-+                    mii_reg)) {
-+            spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+            return -EIO;
-+        }
-+        switch(adapter->hw.phy_type) {
-+        case iegbe_phy_m88:
-+            switch (data->reg_num) {
-+            case PHY_CTRL:
-                 if(mii_reg & MII_CR_POWER_DOWN) {
--					break;
-+                    break;
-                 }
--				if(mii_reg & MII_CR_AUTO_NEG_EN) {
--					adapter->hw.autoneg = 1;
--					adapter->hw.autoneg_advertised = 0x2F;
--				} else {
-+                if(mii_reg & MII_CR_AUTO_NEG_EN) {
-+                    adapter->hw.autoneg = 1;
-+                    adapter->hw.autoneg_advertised = 0x2F;
-+                } else {
-                     if(mii_reg & 0x40){
--						spddplx = SPEED_1000;
-+                        spddplx = SPEED_1000;
-                     } else if(mii_reg & 0x2000) {
--						spddplx = SPEED_100;
-+                        spddplx = SPEED_100;
-                     } else {
--						spddplx = SPEED_10;
-+                        spddplx = SPEED_10;
-                           }
--					spddplx += (mii_reg & 0x100)
--						   ? FULL_DUPLEX :
--						   HALF_DUPLEX;
--					retval = iegbe_set_spd_dplx(adapter,
--								    spddplx);
--					if(retval) {
--						spin_unlock_irqrestore(
--							&adapter->stats_lock,
--							flags);
--						return retval;
--					}
--				}
--				if(netif_running(adapter->netdev)) {
--					iegbe_down(adapter);
--					iegbe_up(adapter);
-+                    spddplx += (mii_reg & 0x100)
-+                           ? FULL_DUPLEX :
-+                           HALF_DUPLEX;
-+                    retval = iegbe_set_spd_dplx(adapter,
-+                                    spddplx);
-+                    if(retval) {
-+                        spin_unlock_irqrestore(
-+                            &adapter->stats_lock,
-+                            flags);
-+                        return retval;
-+                    }
-+                }
-+                if(netif_running(adapter->netdev)) {
-+                    iegbe_down(adapter);
-+                    iegbe_up(adapter);
-                 } else {
--					iegbe_reset(adapter);
-+                    iegbe_reset(adapter);
-                 }
--				break;
--			case M88E1000_PHY_SPEC_CTRL:
--			case M88E1000_EXT_PHY_SPEC_CTRL:
--				if(iegbe_phy_reset(&adapter->hw)) {
--					spin_unlock_irqrestore(
--						&adapter->stats_lock, flags);
--					return -EIO;
--				}
--				break;
--			}
--			break;
-+                break;
-+            case M88E1000_PHY_SPEC_CTRL:
-+            case M88E1000_EXT_PHY_SPEC_CTRL:
-+                if(iegbe_phy_reset(&adapter->hw)) {
-+                    spin_unlock_irqrestore(
-+                        &adapter->stats_lock, flags);
-+                    return -EIO;
-+                }
-+                break;
-+            }
-+            break;
- 
--		case iegbe_phy_oem:
--			retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
--			if(retval) {
--				spin_unlock_irqrestore(
--					&adapter->stats_lock, flags);
--				return retval;
--			}
--			break;
-+        case iegbe_phy_oem:
-+            retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
-+            if(retval) {
-+                spin_unlock_irqrestore(
-+                    &adapter->stats_lock, flags);
-+                return retval;
-+            }
-+            break;
- 
--		default:
--			switch (data->reg_num) {
--			case PHY_CTRL:
-+        default:
-+            switch (data->reg_num) {
-+            case PHY_CTRL:
-                 if(mii_reg & MII_CR_POWER_DOWN) {
--					break;
-+                    break;
-                 }
--				if(netif_running(adapter->netdev)) {
--					iegbe_down(adapter);
--					iegbe_up(adapter);
-+                if(netif_running(adapter->netdev)) {
-+                    iegbe_down(adapter);
-+                    iegbe_up(adapter);
-                 } else {
--					iegbe_reset(adapter);
-+                    iegbe_reset(adapter);
-                 }
--				break;
--			}
--		}
--		spin_unlock_irqrestore(&adapter->stats_lock, flags);
--		break;
--	default:
--		return -EOPNOTSUPP;
--	}
--	return E1000_SUCCESS;
-+                break;
-+            }
-+        }
-+        spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+        break;
-+    default:
-+        return -EOPNOTSUPP;
-+    }
-+    return E1000_SUCCESS;
- }
- #endif
- 
--void
--iegbe_pci_set_mwi(struct iegbe_hw *hw)
-+void iegbe_pci_set_mwi(struct iegbe_hw *hw)
- {
--	struct iegbe_adapter *adapter = hw->back;
--#ifdef HAVE_PCI_SET_MWI
--	int ret_val = pci_set_mwi(adapter->pdev);
--
--    if(ret_val) {
--		DPRINTK(PROBE, ERR, "Error in setting MWI\n");
--    }
--#else
--	pci_write_config_word(adapter->pdev, PCI_COMMAND,
--			      adapter->hw.pci_cmd_word |
--			      PCI_COMMAND_INVALIDATE);
--#endif
-+    struct iegbe_adapter *adapter = hw->back;
-+    int ret_val = pci_set_mwi(adapter->pdev);
-+
-+	if (ret_val)
-+        DPRINTK(PROBE, ERR, "Error in setting MWI\n");
- }
- 
--void
--iegbe_pci_clear_mwi(struct iegbe_hw *hw)
-+void iegbe_pci_clear_mwi(struct iegbe_hw *hw)
- {
--	struct iegbe_adapter *adapter = hw->back;
-+    struct iegbe_adapter *adapter = hw->back;
- 
--#ifdef HAVE_PCI_SET_MWI
--	pci_clear_mwi(adapter->pdev);
--#else
--	pci_write_config_word(adapter->pdev, PCI_COMMAND,
--			      adapter->hw.pci_cmd_word &
--			      ~PCI_COMMAND_INVALIDATE);
--#endif
-+    pci_clear_mwi(adapter->pdev);
- }
- 
- void
- iegbe_read_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
- {
--	struct iegbe_adapter *adapter = hw->back;
-+    struct iegbe_adapter *adapter = hw->back;
- 
--	pci_read_config_word(adapter->pdev, reg, value);
-+    pci_read_config_word(adapter->pdev, reg, value);
- }
- 
- void
- iegbe_write_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
- {
--	struct iegbe_adapter *adapter = hw->back;
-+    struct iegbe_adapter *adapter = hw->back;
- 
--	pci_write_config_word(adapter->pdev, reg, *value);
-+    pci_write_config_word(adapter->pdev, reg, *value);
- }
- 
- uint32_t
- iegbe_io_read(struct iegbe_hw *hw, unsigned long port)
- {
--	return inl(port);
-+    return inl(port);
- }
- 
- void
- iegbe_io_write(struct iegbe_hw *hw, unsigned long port, uint32_t value)
- {
--	outl(value, port);
-+    outl(value, port);
- }
- 
--#ifdef NETIF_F_HW_VLAN_TX
--static void
--iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
-+static void iegbe_vlan_rx_register(struct net_device *netdev,
-+				   struct vlan_group *grp)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t ctrl, rctl;
--
--	iegbe_irq_disable(adapter);
--	adapter->vlgrp = grp;
--
--	if(grp) {
--		/* enable VLAN tag insert/strip */
--		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
--		ctrl |= E1000_CTRL_VME;
--		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
--
--		/* enable VLAN receive filtering */
--		rctl = E1000_READ_REG(&adapter->hw, RCTL);
--		rctl |= E1000_RCTL_VFE;
--		rctl &= ~E1000_RCTL_CFIEN;
--		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
--		iegbe_update_mng_vlan(adapter);
--	} else {
--		/* disable VLAN tag insert/strip */
--		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
--		ctrl &= ~E1000_CTRL_VME;
--		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    uint32_t ctrl, rctl;
- 
--		/* disable VLAN filtering */
--		rctl = E1000_READ_REG(&adapter->hw, RCTL);
--		rctl &= ~E1000_RCTL_VFE;
--		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
--		if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
--			iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
--			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
--		}
--	}
-+	if (!test_bit(__E1000_DOWN, &adapter->flags))
-+    iegbe_irq_disable(adapter);
-+    adapter->vlgrp = grp;
-+
-+    if(grp) {
-+        /* enable VLAN tag insert/strip */
-+        ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+        ctrl |= E1000_CTRL_VME;
-+        E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+
-+        /* enable VLAN receive filtering */
-+        rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+        rctl |= E1000_RCTL_VFE;
-+        rctl &= ~E1000_RCTL_CFIEN;
-+        E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+        iegbe_update_mng_vlan(adapter);
-+    } else {
-+        /* disable VLAN tag insert/strip */
-+        ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+        ctrl &= ~E1000_CTRL_VME;
-+        E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+
-+        /* disable VLAN filtering */
-+        rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+        rctl &= ~E1000_RCTL_VFE;
-+        E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+        if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
-+            iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-+            adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+        }
-+    }
- 
--	iegbe_irq_enable(adapter);
-+	if (!test_bit(__E1000_DOWN, &adapter->flags))
-+    iegbe_irq_enable(adapter);
- }
- 
--static void
--iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
-+static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t vfta, index;
--	if((adapter->hw.mng_cookie.status &
--		E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    uint32_t vfta, index;
-+    if((adapter->hw.mng_cookie.status &
-+        E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-         (vid == adapter->mng_vlan_id)) {
--		return;
-+        return;
-     }
--	/* add VID to filter table */
-+    /* add VID to filter table */
-     index = (vid >> 0x5) & 0x7F;
--	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-+    vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-     vfta |= (0x1 << (vid & 0x1F));
--	iegbe_write_vfta(&adapter->hw, index, vfta);
-+    iegbe_write_vfta(&adapter->hw, index, vfta);
- }
- 
--static void
--iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
-+static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t vfta, index;
-+	u32 vfta, index;
- 
-+	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_disable(adapter);
--
--    if(adapter->vlgrp) {
--		adapter->vlgrp->vlan_devices[vid] = NULL;
--    }
-+	vlan_group_set_device(adapter->vlgrp, vid, NULL);
-+	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_enable(adapter);
- 
--	if((adapter->hw.mng_cookie.status &
--		E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
--        (vid == adapter->mng_vlan_id)) {
--		return;
--    }
- 	/* remove VID from filter table */
--    index = (vid >> 0x5) & 0x7F;
-+	index = (vid >> 0x5) & 0x7F;
- 	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
--    vfta &= ~(0x1 << (vid & 0x1F));
-+	vfta &= ~(0x1 << (vid & 0x1F));
- 	iegbe_write_vfta(&adapter->hw, index, vfta);
- }
- 
--static void
--iegbe_restore_vlan(struct iegbe_adapter *adapter)
-+static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
- {
- 	iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
- 
--	if(adapter->vlgrp) {
--		uint16_t vid;
--		for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
--            if(!adapter->vlgrp->vlan_devices[vid]) {
-+	if (adapter->vlgrp) {
-+		u16 vid;
-+		for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
-+			if (!vlan_group_get_device(adapter->vlgrp, vid))
- 				continue;
--            }
- 			iegbe_vlan_rx_add_vid(adapter->netdev, vid);
- 		}
- 	}
- }
--#endif
- 
--int
--iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx)
-+
-+int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
- {
--	adapter->hw.autoneg = 0;
-+    adapter->hw.autoneg = 0x0;
- 
--	/* Fiber NICs only allow 1000 gbps Full duplex */
--	if((adapter->hw.media_type == iegbe_media_type_fiber
-+    /* Fiber NICs only allow 1000 gbps Full duplex */
-+    if((adapter->hw.media_type == iegbe_media_type_fiber
-         || (adapter->hw.media_type == iegbe_media_type_oem
-             && !iegbe_oem_phy_is_copper(&adapter->hw)))
--       && spddplx != (SPEED_1000 + FULL_DUPLEX)) {
--		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
--		return -EINVAL;
--	}
--
--	switch(spddplx) {
--	case SPEED_10 + HALF_DUPLEX:
--		adapter->hw.forced_speed_duplex = iegbe_10_half;
--		break;
--	case SPEED_10 + FULL_DUPLEX:
--		adapter->hw.forced_speed_duplex = iegbe_10_full;
--		break;
--	case SPEED_100 + HALF_DUPLEX:
--		adapter->hw.forced_speed_duplex = iegbe_100_half;
--		break;
--	case SPEED_100 + FULL_DUPLEX:
--		adapter->hw.forced_speed_duplex = iegbe_100_full;
--		break;
--	case SPEED_1000 + FULL_DUPLEX:
-+       && spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-+        DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-+        return -EINVAL;
-+    }
-+
-+    switch(spddplx) {
-+    case SPEED_10 + DUPLEX_HALF:
-+        adapter->hw.forced_speed_duplex = iegbe_10_half;
-+        break;
-+    case SPEED_10 + DUPLEX_FULL:
-+        adapter->hw.forced_speed_duplex = iegbe_10_full;
-+        break;
-+    case SPEED_100 + DUPLEX_HALF:
-+        adapter->hw.forced_speed_duplex = iegbe_100_half;
-+        break;
-+    case SPEED_100 + DUPLEX_FULL:
-+        adapter->hw.forced_speed_duplex = iegbe_100_full;
-+        break;
-+    case SPEED_1000 + DUPLEX_FULL:
-         adapter->hw.autoneg = 0x1;
--		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
--		break;
--	case SPEED_1000 + HALF_DUPLEX: /* not supported */
--	default:
--		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
--		return -EINVAL;
--	}
--	return 0;
-+        adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
-+        break;
-+    case SPEED_1000 + DUPLEX_HALF: /* not supported */
-+    default:
-+        DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-+        return -EINVAL;
-+    }
-+    return 0x0;
- }
- 
- static int
- iegbe_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
- {
--	struct pci_dev *pdev = NULL;
-+    struct pci_dev *pdev = NULL;
-     pm_message_t state = {0x3};
- 
- 
--	switch(event) {
--	case SYS_DOWN:
--	case SYS_HALT:
--	case SYS_POWER_OFF:
--		while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-+    switch(event) {
-+    case SYS_DOWN:
-+    case SYS_HALT:
-+    case SYS_POWER_OFF:
-+        while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-             if(pci_dev_driver(pdev) == &iegbe_driver) {
--				iegbe_suspend(pdev, state);
--		}
--	}
-+                iegbe_suspend(pdev, state);
-+            }
-+        }
-     }
--	return NOTIFY_DONE;
-+    return NOTIFY_DONE;
- }
- 
- static int
- iegbe_suspend(struct pci_dev *pdev, pm_message_t state)
- {
--	struct net_device *netdev = pci_get_drvdata(pdev);
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
--	uint32_t wufc = adapter->wol;
--	uint16_t cmd_word;
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
-+    uint32_t wufc = adapter->wol;
-+    uint16_t cmd_word;
- 
--	netif_device_detach(netdev);
-+    netif_device_detach(netdev);
- 
-     if(netif_running(netdev)) {
--		iegbe_down(adapter);
-+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
-+        iegbe_down(adapter);
-     }
--	/*
--	 * ICP_XXXX style MACs do not have a link up bit in
--	 * the STATUS register, query the PHY directly
--	 */
--	if(adapter->hw.mac_type != iegbe_icp_xxxx) {
--		status = E1000_READ_REG(&adapter->hw, STATUS);
-+    /*
-+     * ICP_XXXX style MACs do not have a link up bit in
-+     * the STATUS register, query the PHY directly
-+     */
-+    if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-+        status = E1000_READ_REG(&adapter->hw, STATUS);
-         if(status & E1000_STATUS_LU) {
--			wufc &= ~E1000_WUFC_LNKC;
-+            wufc &= ~E1000_WUFC_LNKC;
-         }
--	} else {
--		int isUp = 0;
-+    } else {
-+        int isUp = 0x0;
-         if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
--			isUp = 0;
-+            isUp = 0x0;
-         }
-         if(isUp) {
--			wufc &= ~E1000_WUFC_LNKC;
--	}
-+            wufc &= ~E1000_WUFC_LNKC;
-+        }
-     }
- 
--	if(wufc) {
--		iegbe_setup_rctl(adapter);
--		iegbe_set_multi(netdev);
--
--		/* turn on all-multi mode if wake on multicast is enabled */
--		if(adapter->wol & E1000_WUFC_MC) {
--			rctl = E1000_READ_REG(&adapter->hw, RCTL);
--			rctl |= E1000_RCTL_MPE;
--			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
--		}
-+    if(wufc) {
-+        iegbe_setup_rctl(adapter);
-+		iegbe_set_rx_mode(netdev);
-+
-+        /* turn on all-multi mode if wake on multicast is enabled */
-+        if(adapter->wol & E1000_WUFC_MC) {
-+            rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+            rctl |= E1000_RCTL_MPE;
-+            E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+        }
- 
--		if(adapter->hw.mac_type >= iegbe_82540) {
--			ctrl = E1000_READ_REG(&adapter->hw, CTRL);
--			/* advertise wake from D3Cold */
--			#define E1000_CTRL_ADVD3WUC 0x00100000
--			/* phy power management enable */
--			ctrl |= E1000_CTRL_ADVD3WUC |
--			        (adapter->hw.mac_type != iegbe_icp_xxxx
--			                     ? E1000_CTRL_EN_PHY_PWR_MGMT : 0);
-+        if(adapter->hw.mac_type >= iegbe_82540) {
-+            ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+            /* advertise wake from D3Cold */
-+            #define E1000_CTRL_ADVD3WUC 0x00100000
-+            /* phy power management enable */
-+			#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-+            ctrl |= E1000_CTRL_ADVD3WUC |
-+                    (adapter->hw.mac_type != iegbe_icp_xxxx
-+                                 ? E1000_CTRL_EN_PHY_PWR_MGMT : 0x0);
- 
--			E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
--		}
-+            E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+        }
- 
--		if(adapter->hw.media_type == iegbe_media_type_fiber ||
--		   adapter->hw.media_type == iegbe_media_type_internal_serdes) {
--			/* keep the laser running in D3 */
--			ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
--			ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
--			E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
--		}
-+        if(adapter->hw.media_type == iegbe_media_type_fiber ||
-+           adapter->hw.media_type == iegbe_media_type_internal_serdes) {
-+            /* keep the laser running in D3 */
-+            ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+            ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
-+            E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
-+        }
- 
-         /* Allow OEM PHYs (if any exist) to keep the laser
-          *running in D3 */
-         iegbe_oem_fiber_live_in_suspend(&adapter->hw);
- 
--		/* Allow time for pending master requests to run */
--		iegbe_disable_pciex_master(&adapter->hw);
-+        /* Allow time for pending master requests to run */
-+        iegbe_disable_pciex_master(&adapter->hw);
- 
--		E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
--		E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
-+        E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
-+        E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
-         pci_enable_wake(pdev, 0x3, 0x1);
-         pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
--	} else {
--		E1000_WRITE_REG(&adapter->hw, WUC, 0);
--		E1000_WRITE_REG(&adapter->hw, WUFC, 0);
--        pci_enable_wake(pdev, 0x3, 0);
--        pci_enable_wake(pdev, 0x4, 0); /* 4 == D3 cold */
--	}
-+    } else {
-+        E1000_WRITE_REG(&adapter->hw, WUC, 0x0);
-+        E1000_WRITE_REG(&adapter->hw, WUFC, 0x0);
-+        pci_enable_wake(pdev, 0x3, 0x0);
-+        pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
-+    }
- 
--	pci_save_state(pdev);
--
--	if(adapter->hw.mac_type >= iegbe_82540
--	   && adapter->hw.mac_type != iegbe_icp_xxxx
--	   && adapter->hw.media_type == iegbe_media_type_copper) {
--		manc = E1000_READ_REG(&adapter->hw, MANC);
--		if(manc & E1000_MANC_SMBUS_EN) {
--			manc |= E1000_MANC_ARP_EN;
--			E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+    pci_save_state(pdev);
-+
-+    if(adapter->hw.mac_type >= iegbe_82540
-+       && adapter->hw.mac_type != iegbe_icp_xxxx
-+       && adapter->hw.media_type == iegbe_media_type_copper) {
-+        manc = E1000_READ_REG(&adapter->hw, MANC);
-+        if(manc & E1000_MANC_SMBUS_EN) {
-+            manc |= E1000_MANC_ARP_EN;
-+            E1000_WRITE_REG(&adapter->hw, MANC, manc);
-             pci_enable_wake(pdev, 0x3, 0x1);
-             pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
--		}
--	}
-+        }
-+    }
- 
--	switch(adapter->hw.mac_type) {
--	case iegbe_82571:
--	case iegbe_82572:
--		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
--		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
--				ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
--		break;
--	case iegbe_82573:
--		swsm = E1000_READ_REG(&adapter->hw, SWSM);
--		E1000_WRITE_REG(&adapter->hw, SWSM,
--				swsm & ~E1000_SWSM_DRV_LOAD);
--		break;
--	default:
--		break;
--	}
-+    switch(adapter->hw.mac_type) {
-+    case iegbe_82571:
-+    case iegbe_82572:
-+        ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+        E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-+                ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-+        break;
-+    case iegbe_82573:
-+        swsm = E1000_READ_REG(&adapter->hw, SWSM);
-+        E1000_WRITE_REG(&adapter->hw, SWSM,
-+                swsm & ~E1000_SWSM_DRV_LOAD);
-+        break;
-+    default:
-+        break;
-+    }
- 
--	pci_disable_device(pdev);
--	if(adapter->hw.mac_type == iegbe_icp_xxxx) {
--		/*
--		 * ICP xxxx devices are not true PCI devices, in the context
--		 * of power management, disabling the bus mastership is not
--		 * sufficient to disable the device, it is also necessary to
--		 * disable IO, Memory, and Interrupts if they are enabled.
--		 */
--		pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
-+    pci_disable_device(pdev);
-+    if(adapter->hw.mac_type == iegbe_icp_xxxx) {
-+        /*
-+         * ICP xxxx devices are not true PCI devices, in the context
-+         * of power management, disabling the bus mastership is not
-+         * sufficient to disable the device, it is also necessary to
-+         * disable IO, Memory, and Interrupts if they are enabled.
-+         */
-+        pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
-         if(cmd_word & PCI_COMMAND_IO) {
--			cmd_word &= ~PCI_COMMAND_IO;
-+            cmd_word &= ~PCI_COMMAND_IO;
-         }
-         if(cmd_word & PCI_COMMAND_MEMORY) {
--			cmd_word &= ~PCI_COMMAND_MEMORY;
-+            cmd_word &= ~PCI_COMMAND_MEMORY;
-         }
-         if(cmd_word & PCI_COMMAND_INTX_DISABLE) {
--			cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
-+            cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
-         }
--		pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
--	}
-+        pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
-+    }
- 
--    state.event = (state.event > 0) ? 0x3 : 0;
--	pci_set_power_state(pdev, state.event);
--	 if(gcu_suspend == 0)
-+    state.event = (state.event > 0x0) ? 0x3 : 0x0;
-+    pci_set_power_state(pdev, state.event);
-+	 if(gcu_suspend == 0x0)
- 	 {
- 	 	if(gcu == NULL) {
--    		gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
--		}
-+    		gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL); 
-+		}		
- 	 	gcu_iegbe_suspend(gcu, 0x3);
--	 	gcu_suspend = 1;
--	 	gcu_resume = 0;
-+	 	gcu_suspend = 0x1;
-+	 	gcu_resume = 0x0;
- 	 }
--	return 0;
-+    return 0x0;
- }
- 
- #ifdef CONFIG_PM
- static int
- iegbe_resume(struct pci_dev *pdev)
- {
--	struct net_device *netdev = pci_get_drvdata(pdev);
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	uint32_t manc, ret_val, swsm;
--	uint32_t ctrl_ext;
-+    struct net_device *netdev = pci_get_drvdata(pdev);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    uint32_t manc, ret_val, swsm;
-+    uint32_t ctrl_ext;
- 	 int offset;
-     uint32_t vdid;
- 
--	 if(gcu_resume == 0)
-+	 if(gcu_resume == 0x0)
- 	 {
- 	 	if(gcu == NULL) {
--    		gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
-+    		gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL); 
- 		   pci_read_config_dword(gcu, 0x00, &vdid);
--		}
--
-+		}		
-+		
- 	 	if(gcu) {
- 			gcu_iegbe_resume(gcu);
--	 		gcu_resume = 1;
--	 		gcu_suspend = 0;
-+	 		gcu_resume = 0x1;
-+	 		gcu_suspend = 0x0;
- 		} else {
- 			printk("Unable to resume GCU!\n");
--		}
-+		}	
- 	 }
-     pci_set_power_state(pdev, 0x0);
--	pci_restore_state(pdev);
--	ret_val = pci_enable_device(pdev);
--	pci_set_master(pdev);
-+    pci_restore_state(pdev);
-+    ret_val = pci_enable_device(pdev);
-+    pci_set_master(pdev);
- 
-     pci_enable_wake(pdev, 0x3, 0x0);
-     pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
- 
--	iegbe_reset(adapter);
--	E1000_WRITE_REG(&adapter->hw, WUS, ~0);
-+    iegbe_reset(adapter);
-+    E1000_WRITE_REG(&adapter->hw, WUS, ~0);
-     offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_ST)
-                  + PCI_ST_SMIA_OFFSET;
-     pci_write_config_dword(adapter->pdev, offset, 0x00000006);
-@@ -5138,51 +4848,52 @@ iegbe_resume(struct pci_dev *pdev)
-     E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
- 
-     if(netif_running(netdev)) {
--		iegbe_up(adapter);
-+        iegbe_up(adapter);
-     }
--	netif_device_attach(netdev);
--
--	if(adapter->hw.mac_type >= iegbe_82540
--	   && adapter->hw.mac_type != iegbe_icp_xxxx
--	   && adapter->hw.media_type == iegbe_media_type_copper) {
--		manc = E1000_READ_REG(&adapter->hw, MANC);
--		manc &= ~(E1000_MANC_ARP_EN);
--		E1000_WRITE_REG(&adapter->hw, MANC, manc);
--	}
-+    netif_device_attach(netdev);
- 
--	switch(adapter->hw.mac_type) {
--	case iegbe_82571:
--	case iegbe_82572:
--		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
--		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
--				ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
--		break;
--	case iegbe_82573:
--		swsm = E1000_READ_REG(&adapter->hw, SWSM);
--		E1000_WRITE_REG(&adapter->hw, SWSM,
--				swsm | E1000_SWSM_DRV_LOAD);
--		break;
--	default:
--		break;
--	}
-+    if(adapter->hw.mac_type >= iegbe_82540
-+       && adapter->hw.mac_type != iegbe_icp_xxxx
-+       && adapter->hw.media_type == iegbe_media_type_copper) {
-+        manc = E1000_READ_REG(&adapter->hw, MANC);
-+        manc &= ~(E1000_MANC_ARP_EN);
-+        E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+    }
-+
-+    switch(adapter->hw.mac_type) {
-+    case iegbe_82571:
-+    case iegbe_82572:
-+        ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+        E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-+                ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-+        break;
-+    case iegbe_82573:
-+        swsm = E1000_READ_REG(&adapter->hw, SWSM);
-+        E1000_WRITE_REG(&adapter->hw, SWSM,
-+                swsm | E1000_SWSM_DRV_LOAD);
-+        break;
-+    default:
-+        break;
-+    }
-+#endif
- 
--	return 0;
-+    return 0x0;
- }
--#endif
-+
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
-  * Polling 'interrupt' - used by things like netconsole to send skbs
-  * without having to re-enable interrupts. It's not called while
-  * the interrupt routine is executing.
-  */
--static void
--iegbe_netpoll(struct net_device *netdev)
-+static void iegbe_netpoll(struct net_device *netdev)
- {
--	struct iegbe_adapter *adapter = netdev_priv(netdev);
--	disable_irq(adapter->pdev->irq);
--	iegbe_intr(adapter->pdev->irq, netdev, NULL);
--	enable_irq(adapter->pdev->irq);
-+    struct iegbe_adapter *adapter = netdev_priv(netdev);
-+    disable_irq(adapter->pdev->irq);
-+    iegbe_intr(adapter->pdev->irq, netdev);
-+    enable_irq(adapter->pdev->irq);
- }
- #endif
- 
-+
- /* iegbe_main.c */
---- a/Embedded/src/GbE/iegbe_oem_phy.c
-+++ b/Embedded/src/GbE/iegbe_oem_phy.c
-@@ -2,31 +2,31 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
--  This program is free software; you can redistribute it and/or modify
-+  This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-   published by the Free Software Foundation.
- 
--  This program is distributed in the hope that it will be useful, but
--  WITHOUT ANY WARRANTY; without even the implied warranty of
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+  This program is distributed in the hope that it will be useful, but 
-+  WITHOUT ANY WARRANTY; without even the implied warranty of 
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
-   General Public License for more details.
- 
--  You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
-+  You should have received a copy of the GNU General Public License 
-+  along with this program; if not, write to the Free Software 
-   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--  The full GNU General Public License is included in this distribution
-+  The full GNU General Public License is included in this distribution 
-   in the file called LICENSE.GPL.
- 
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
--  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-+  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226 
- 
- *****************************************************************************/
- /**************************************************************************
-@@ -65,11 +65,6 @@ static int32_t iegbe_oem_link_m88_setup(
- static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
- static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
- 
--/* Define specific BCM functions */
--static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
--static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
--static int32_t oi_phy_setup (struct iegbe_hw *hw);
--
- /**
-  * iegbe_oem_setup_link
-  * @hw: iegbe_hw struct containing device specific information
-@@ -84,7 +79,7 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- {
- #ifdef EXTERNAL_MDIO
- 
--    /*
-+    /* 
-      * see iegbe_setup_copper_link() as the primary example. Look at both
-      * the M88 and IGP functions that are called for ideas, possibly for
-      * power management.
-@@ -102,14 +97,14 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-     }
-     /* AFU: add test to exit out if improper phy type
-      */
--	/* relevent parts of iegbe_copper_link_preconfig */
--	ctrl = E1000_READ_REG(hw, CTRL);
--	ctrl |= E1000_CTRL_SLU;
--	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
--	E1000_WRITE_REG(hw, CTRL, ctrl);
--
-+    /* relevent parts of iegbe_copper_link_preconfig */
-+    ctrl = E1000_READ_REG(hw, CTRL);
-+    ctrl |= E1000_CTRL_SLU;
-+    ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-+    E1000_WRITE_REG(hw, CTRL, ctrl);
-+    
-     /* this is required for *hw init */
--    ret_val = iegbe_oem_detect_phy(hw);
-+    ret_val = iegbe_oem_detect_phy(hw); 
-     if(ret_val) {
-         return ret_val;
-     }
-@@ -119,23 +114,13 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-     }
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--            return E1000_SUCCESS;
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_link_m88_setup(hw);
--            if(ret_val) {
--                return ret_val;
--            }
--        break;
--        case BCM5481_PHY_ID:
--            ret_val = iegbe_oem_link_bcm5481_setup(hw);
--            if(ret_val) {
--                return ret_val;
-+            if(ret_val) { 
-+                return ret_val; 
-             }
--        break;
-+        break; 
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return -E1000_ERR_PHY_TYPE;
-@@ -143,16 +128,16 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- 
-      if(hw->autoneg) {
-          ret_val = iegbe_copper_link_autoneg(hw);
--         if(ret_val) {
--             return ret_val;
--     }
-+         if(ret_val) { 
-+             return ret_val; 
-      }
-+     } 
-      else {
-          DEBUGOUT("Forcing speed and duplex\n");
-          ret_val = iegbe_phy_force_speed_duplex(hw);
-      }
--
--     /*
-+           
-+     /* 
-       * Check link status. Wait up to 100 microseconds for link to become
-       * valid.
-       */
-@@ -194,51 +179,6 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
--/**
-- * iegbe_oem_link_bcm5481_setup
-- * @hw: iegbe_hw struct containing device specific information
-- *
-- * Returns E1000_SUCCESS, negative E1000 error code on failure
-- *
-- * copied verbatim from iegbe_oem_link_m88_setup
-- **/
--static int32_t
--iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
--{
--	int32_t ret_val;
--	uint16_t phy_data;
--
--	//DEBUGFUNC(__func__);
--
--	if(!hw)
--		return -1;
--
--	/* phy_reset_disable is set in iegbe_oem_set_phy_mode */
--	if(hw->phy_reset_disable)
--		return E1000_SUCCESS;
--
--   // Enable MDIX in extended control reg.
--	ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
--	if(ret_val)
--	{
--		DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
--		return ret_val;
--	}
--
--   phy_data &= ~BCM5481_ECTRL_DISMDIX;
--	ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
--	if(ret_val)
--	{
--		DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
--		return ret_val;
--	}
--
--   ret_val = oi_phy_setup (hw);
--   if (ret_val)
--		return ret_val;
--
--	return E1000_SUCCESS;
--}
- 
- /**
-  * iegbe_oem_link_m88_setup
-@@ -253,7 +193,7 @@ static int32_t
- iegbe_oem_link_m88_setup(struct iegbe_hw *hw)
- {
-     int32_t ret_val;
--    uint16_t phy_data;
-+    uint16_t phy_data = 0;
- 
-     DEBUGFUNC1("%s",__func__);
- 
-@@ -261,7 +201,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-         return -1;
-     }
- 
--    ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+    ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, 
-                                               &phy_data);
-     phy_data |= 0x00000008;
-     ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-@@ -279,7 +219,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- 
-     phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
- 
--    /*
-+    /* 
-      * Options:
-      *   MDI/MDI-X = 0 (default)
-      *   0 - Auto for all speeds
-@@ -305,7 +245,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-     break;
-     }
- 
--    /*
-+    /* 
-      * Options:
-      *   disable_polarity_correction = 0 (default)
-      *       Automatic Correction for Reversed Cable Polarity
-@@ -316,25 +256,25 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- 
-     if(hw->disable_polarity_correction == 1) {
-         phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
--    }
-+    }          
-     ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-     if(ret_val) {
-         DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
-         return ret_val;
-     }
- 
--    /*
-+    /* 
-      * Force TX_CLK in the Extended PHY Specific Control Register
-      * to 25MHz clock.
-      */
--    ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-+    ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL, 
-                                         &phy_data);
-     if(ret_val) {
-         DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
-         return ret_val;
-     }
- 
--    /*
-+    /* 
-      * For Truxton, it is necessary to add RGMII tx and rx
-      * timing delay though the EXT_PHY_SPEC_CTRL register
-      */
-@@ -350,13 +290,13 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-         phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
-                      M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-     }
--    ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-+    ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL, 
-                                          phy_data);
-     if(ret_val) {
-             DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
-         return ret_val;
-     }
--
-+    
- 
-     /* SW Reset the PHY so all changes take effect */
-     ret_val = iegbe_phy_hw_reset(hw);
-@@ -371,7 +311,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- /**
-  * iegbe_oem_force_mdi
-  * @hw: iegbe_hw struct containing device specific information
-- * @resetPhy: returns true if after calling this function the
-+ * @resetPhy: returns true if after calling this function the 
-  *            PHY requires a reset
-  *
-  * Returns E1000_SUCCESS, negative E1000 error code on failure
-@@ -379,7 +319,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-  * This is called from iegbe_phy_force_speed_duplex, which is
-  * called from iegbe_oem_setup_link.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_force_mdi(struct iegbe_hw *hw, int *resetPhy)
- {
- #ifdef EXTERNAL_MDIO
-@@ -393,35 +333,30 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
-         return -1;
-     }
- 
--    /*
-+    /* 
-      * a boolean to indicate if the phy needs to be reset
--     *
-+     * 
-      * Make note that the M88 phy is what'll be used on Truxton
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-       switch (hw->phy_id) {
--          case BCM5395S_PHY_ID:
--          case BCM5481_PHY_ID:
--              DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
--          break;
--
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
--              ret_val = iegbe_oem_read_phy_reg_ex(hw,
--                                                   M88E1000_PHY_SPEC_CTRL,
-+              ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-+                                                   M88E1000_PHY_SPEC_CTRL, 
-                                                    &phy_data);
-               if(ret_val) {
-                   DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
-                   return ret_val;
-                }
--
-+          
-                /*
--                * Clear Auto-Crossover to force MDI manually. M88E1000 requires
-+                * Clear Auto-Crossover to force MDI manually. M88E1000 requires 
-                 * MDI forced whenever speed are duplex are forced.
-                 */
--
-+          
-               phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
--          ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+          ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, 
-                                                     phy_data);
-               if(ret_val) {
-                   DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
-@@ -458,7 +393,7 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
-  * This is called from iegbe_phy_force_speed_duplex, which is
-  * called from iegbe_oem_setup_link.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_phy_reset_dsp(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -478,10 +413,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
-      * no-op.
-      */
-      switch (hw->phy_id) {
--          case M88E1000_I_PHY_ID:
--          case M88E1141_E_PHY_ID:
--          case BCM5481_PHY_ID:
--          case BCM5395S_PHY_ID:
-+         case M88E1000_I_PHY_ID:
-+         case M88E1141_E_PHY_ID:
-              DEBUGOUT("No DSP to reset on OEM PHY\n");
-          break;
-          default:
-@@ -508,7 +441,7 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
-  * This is called from iegbe_phy_force_speed_duplex, which is
-  * called from iegbe_oem_setup_link.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_cleanup_after_phy_reset(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -520,29 +453,24 @@ iegbe_oem_cleanup_after_phy_reset(struct
- 
-     if(!hw) {
-         return -1;
--    }
-+    } 
- 
--    /*
-+    /* 
-      * Make note that the M88 phy is what'll be used on Truxton.
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--            DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /*
--             * Because we reset the PHY above, we need to re-force
-+             * Because we reset the PHY above, we need to re-force 
-              * TX_CLK in the Extended PHY Specific Control Register to
-              * 25MHz clock.  This value defaults back to a 2.5MHz clock
-              * when the PHY is reset.
-              */
- 
-              ret_val = iegbe_oem_read_phy_reg_ex(hw,
--                                                 M88E1000_EXT_PHY_SPEC_CTRL,
-+                                                 M88E1000_EXT_PHY_SPEC_CTRL, 
-                                                  &phy_data);
-              if(ret_val) {
-                  DEBUGOUT("Unable to read M88E1000_EXT_SPEC_CTRL register\n");
-@@ -550,22 +478,23 @@ iegbe_oem_cleanup_after_phy_reset(struct
-              }
- 
-              phy_data |= M88E1000_EPSCR_TX_CLK_25;
--             ret_val = iegbe_oem_write_phy_reg_ex(hw,
--                                                   M88E1000_EXT_PHY_SPEC_CTRL,
-+             ret_val = iegbe_oem_write_phy_reg_ex(hw, 
-+                                                   M88E1000_EXT_PHY_SPEC_CTRL, 
-                                                    phy_data);
-              if(ret_val) {
--                 DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL register\n");
-+                 DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL " 
-+				          "register\n");
-                  return ret_val;
-              }
- 
-              /*
-               * In addition, because of the s/w reset above, we need to enable
--              * CRX on TX.  This must be set for both full and half duplex
-+              * CRX on TX.  This must be set for both full and half duplex 
-               * operation.
-               */
- 
--              ret_val = iegbe_oem_read_phy_reg_ex(hw,
--                                                   M88E1000_PHY_SPEC_CTRL,
-+              ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-+                                                   M88E1000_PHY_SPEC_CTRL, 
-                                                    &phy_data);
-               if(ret_val) {
-                   DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
-@@ -573,12 +502,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
-               }
- 
-           phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
--          ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+          ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, 
-                                                     phy_data);
-               if(ret_val) {
-                   DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
-                   return ret_val;
--              }
-+              }         
-         break;
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-@@ -604,12 +533,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
-  * This is called from iegbe_oem_setup_link which is
-  * called from iegbe_setup_link.
-  **/
--static int32_t
-+static int32_t 
- iegbe_oem_set_phy_mode(struct iegbe_hw *hw)
- {
-     /*
-      * it is unclear if it is necessary to set the phy mode. Right now only
--     * one MAC 82545 Rev 3 does it, but the other MACs like Tolapai do not.
-+     * one MAC 82545 Rev 3 does it, but the other MACs like tola do not.
-      * Leave the functionality off for now until it is determined that Tolapai
-      * needs it as well.
-      */
-@@ -638,41 +567,37 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
- #ifndef skip_set_mode
-     DEBUGOUT("No need to call oem_set_phy_mode on Truxton\n");
- #else
--    /*
-+    /* 
-      * Make note that the M88 phy is what'll be used on Truxton.
-      *
-      * use iegbe_set_phy_mode as example
-      */
-     switch (hw->phy_id) {
--         case BCM5395S_PHY_ID:
--         case BCM5481_PHY_ID:
--             DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
--         break;
--
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
--             ret_val = iegbe_read_eeprom(hw,
--                                          EEPROM_PHY_CLASS_WORD,
--                                          1,
-+             ret_val = iegbe_read_eeprom(hw, 
-+                                          EEPROM_PHY_CLASS_WORD, 
-+                                          1, 
-                                           &eeprom_data);
-               if(ret_val) {
-                   return ret_val;
-               }
- 
--              if((eeprom_data != EEPROM_RESERVED_WORD) &&
--                  (eeprom_data & EEPROM_PHY_CLASS_A))
-+              if((eeprom_data != EEPROM_RESERVED_WORD) && 
-+                  (eeprom_data & EEPROM_PHY_CLASS_A)) 
-               {
--                  ret_val = iegbe_oem_write_phy_reg_ex(hw,
--                                                       M88E1000_PHY_PAGE_SELECT,
--                                                       0x000B);
-+                  ret_val = iegbe_oem_write_phy_reg_ex(hw, 
-+				                                    M88E1000_PHY_PAGE_SELECT, 
-+                                                    0x000B);
-                   if(ret_val) {
--                      DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT register on PHY\n");
-+                      DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT "
-+					           "register on PHY\n");
-                       return ret_val;
-                   }
- 
--                  ret_val = iegbe_oem_write_phy_reg_ex(hw,
--                                                       M88E1000_PHY_GEN_CONTROL,
--                                                       0x8104);
-+                  ret_val = iegbe_oem_write_phy_reg_ex(hw, 
-+                                                      M88E1000_PHY_GEN_CONTROL, 
-+                                                      0x8104);
-                   if(ret_val) {
-                       DEBUGOUT("Unable to write to M88E1000_PHY_GEN_CONTROL"
-                                "register on PHY\n");
-@@ -687,11 +612,12 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
-             return -E1000_ERR_PHY_TYPE;
-     }
- #endif
--
-+    
-     return E1000_SUCCESS;
- 
- }
- 
-+
- /**
-  * iegbe_oem_detect_phy
-  * @hw: iegbe_hw struct containing device specific information
-@@ -702,7 +628,7 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
-  *
-  * This borrows heavily from iegbe_detect_gig_phy
-  **/
--static int32_t
-+static int32_t 
- iegbe_oem_detect_phy(struct iegbe_hw *hw)
- {
-     int32_t ret_val;
-@@ -715,33 +641,20 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
-     }
-     hw->phy_type = iegbe_phy_oem;
- 
--{
--	// If MAC2 (BCM5395 switch), manually detect the phy
--	struct iegbe_adapter *adapter;
--	uint32_t device_number;
--    adapter = (struct iegbe_adapter *) hw->back;
--    device_number = PCI_SLOT(adapter->pdev->devfn);
--	if (device_number == ICP_XXXX_MAC_2) {
--          hw->phy_id = BCM5395S_PHY_ID;
--		  hw->phy_revision = 0;
--		  return E1000_SUCCESS;
--	}
--}
--
--
-     ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
-     if(ret_val) {
-         DEBUGOUT("Unable to read PHY register PHY_ID1\n");
-         return ret_val;
-     }
--
-+    
-     usec_delay(0x14);
-     ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID2, &phy_id_low);
-     if(ret_val) {
-         DEBUGOUT("Unable to read PHY register PHY_ID2\n");
-         return ret_val;
-     }
--    hw->phy_id = (uint32_t) ((phy_id_high << 0x10) + phy_id_low);
-+    hw->phy_id = (uint32_t) ((phy_id_high << 0x10) + 
-+	                         (phy_id_low & PHY_REVISION_MASK));
-     hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
- 
-     return E1000_SUCCESS;
-@@ -753,15 +666,15 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
-  * @hw: iegbe_hw struct containing device specific information
-  *
-  * Returns the value of the Inter Packet Gap (IPG) Transmit Time (IPGT) in the
-- * Transmit IPG register appropriate for the given PHY. This field is only 10
-+ * Transmit IPG register appropriate for the given PHY. This field is only 10 
-  * bits wide.
-  *
-  * In the original iegbe code, only the IPGT field varied between media types.
-- * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would
-+ * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would 
-  * be required to modify the iegbe_config_tx() function to accomdate the change
-  *
-  **/
--uint32_t
-+uint32_t 
- iegbe_oem_get_tipg(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -777,15 +690,13 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
-     switch (hw->phy_id) {
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
--         case BCM5481_PHY_ID:
--         case BCM5395S_PHY_ID:
-              phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
-          break;
-          default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return DEFAULT_ICP_XXXX_TIPG_IPGT;
-     }
--
-+    
-     return phy_num;
- 
- #else /* ifdef EXTERNAL_MDIO */
-@@ -803,15 +714,15 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
-  * iegbe_oem_phy_is_copper
-  * @hw: iegbe_hw struct containing device specific information
-  *
-- * Test for media type within the iegbe driver is common, so this is a simple
-- * test for copper PHYs. The ICP_XXXX family of controllers initially only
-- * supported copper interconnects (no TBI (ten bit interface) for Fiber
-- * existed). If future revs support either Fiber or an internal SERDES, it
-- * may become necessary to evaluate where this function is used to go beyond
-+ * Test for media type within the iegbe driver is common, so this is a simple 
-+ * test for copper PHYs. The ICP_XXXX family of controllers initially only 
-+ * supported copper interconnects (no TBI (ten bit interface) for Fiber 
-+ * existed). If future revs support either Fiber or an internal SERDES, it 
-+ * may become necessary to evaluate where this function is used to go beyond 
-  * determining whether or not media type is just copper.
-  *
-  **/
--int
-+int 
- iegbe_oem_phy_is_copper(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -827,23 +738,21 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
--        case BCM5395S_PHY_ID:
-             isCopper = TRUE;
-         break;
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return -E1000_ERR_PHY_TYPE;
-     }
--
-+    
-     return isCopper;
- 
- #else /* ifdef EXTERNAL_MDIO */
- 
--    /*
-+    /* 
-      * caught between returning true or false. True allows it to
-      * be entered into && statements w/o ill effect, but false
--     * would make more sense
-+     * would make more sense 
-      */
-     DEBUGOUT("Invalid value for transceiver type, return FALSE\n");
-     return FALSE;
-@@ -856,19 +765,19 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
-  * iegbe_oem_get_phy_dev_number
-  * @hw: iegbe_hw struct containing device specific information
-  *
-- * For ICP_XXXX family of devices, there are 3 MACs, each of which may
-- * have a different PHY (and indeed a different media interface). This
-- * function is used to indicate which of the MAC/PHY pairs we are interested
-+ * For ICP_XXXX family of devices, there are 3 MACs, each of which may 
-+ * have a different PHY (and indeed a different media interface). This 
-+ * function is used to indicate which of the MAC/PHY pairs we are interested 
-  * in.
-- *
-+ * 
-  **/
--uint32_t
-+uint32_t 
- iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
- 
--    /*
--     * for ICP_XXXX family of devices, the three network interfaces are
-+    /* 
-+     * for ICP_XXXX family of devices, the three network interfaces are 
-      * differentiated by their PCI device number, where the three share
-      * the same PCI bus
-      */
-@@ -886,15 +795,15 @@ iegbe_oem_get_phy_dev_number(struct iegb
- 
- 	switch(device_number)
-     {
--      case ICP_XXXX_MAC_0:
-+      case ICP_XXXX_MAC_0: 
-+	      hw->phy_addr = 0x00;
-+	  break;
-+      case ICP_XXXX_MAC_1: 
- 	      hw->phy_addr = 0x01;
- 	  break;
--      case ICP_XXXX_MAC_1:
-+      case ICP_XXXX_MAC_2: 
- 	      hw->phy_addr = 0x02;
- 	  break;
--      case ICP_XXXX_MAC_2:
--	      hw->phy_addr = 0x00;
--	  break;
- 	  default:  hw->phy_addr = 0x00;
-     }
-      return hw->phy_addr;
-@@ -915,7 +824,7 @@ iegbe_oem_get_phy_dev_number(struct iegb
-  * @cmd: the original IOCTL command that instigated the call chain.
-  *
-  * This function abstracts out the code necessary to service the
-- * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs.
-+ * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs. 
-  * iegbe_mii_ioctl() was implemented for copper phy's only and this
-  * function will only be called if iegbe_oem_phy_is_copper() returns true for
-  * a given MAC. Note that iegbe_mii_ioctl() has a compile flag
-@@ -924,14 +833,14 @@ iegbe_oem_get_phy_dev_number(struct iegb
-  * NOTE: a spinlock is in effect for the duration of this call. It is
-  *       imperative that a negative value be returned on any error, so
-  *       the spinlock can be released properly.
-- *
-+ *     
-  **/
- int
- iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
-                     struct ifreq *ifr, int cmd)
- {
- #ifdef EXTERNAL_MDIO
--
-+    
-     struct mii_ioctl_data *data = if_mii(ifr);
-     uint16_t mii_reg = data->val_in;
-     uint16_t spddplx;
-@@ -942,12 +851,6 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
-     if(!adapter || !ifr) {
-         return -1;
-     }
--
--    // If MAC2 (BCM5395 switch) then leave now
--    if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
--			return -1;
--	}
--
-     switch (data->reg_num) {
-         case PHY_CTRL:
-             if(mii_reg & MII_CR_POWER_DOWN) {
-@@ -956,7 +859,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
-             if(mii_reg & MII_CR_AUTO_NEG_EN) {
-                 adapter->hw.autoneg = 1;
-                 adapter->hw.autoneg_advertised = ICP_XXXX_AUTONEG_ADV_DEFAULT;
--            }
-+            } 
-             else {
-                 if(mii_reg & 0x40) {
-                     spddplx = SPEED_1000;
-@@ -976,7 +879,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
-             if(netif_running(adapter->netdev)) {
-                 iegbe_down(adapter);
-                 iegbe_up(adapter);
--            }
-+            } 
-             else {
-                 iegbe_reset(adapter);
-             }
-@@ -1043,10 +946,10 @@ void iegbe_oem_fiber_live_in_suspend(str
-  * Note: The call to iegbe_get_regs() assumed an array of 24 elements
-  *       where the last 11 are passed to this function. If the array
-  *       that is passed to the calling function has its size or element
-- *       defintions changed, this function becomes broken.
-+ *       defintions changed, this function becomes broken. 
-  *
-  **/
--void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
-+void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data, 
-                             uint32_t data_len)
- {
- #define EXPECTED_ARRAY_LEN 11
-@@ -1062,13 +965,13 @@ void iegbe_oem_get_phy_regs(struct iegbe
-      * Use the corrected_length variable to make sure we don't exceed that
-      * length
-      */
--    corrected_len = data_len>EXPECTED_ARRAY_LEN
-+    corrected_len = data_len>EXPECTED_ARRAY_LEN 
-                     ? EXPECTED_ARRAY_LEN : data_len;
-     memset(data, 0, corrected_len*sizeof(uint32_t));
- 
- #ifdef EXTERNAL_MDIO
- 
--    /*
-+    /* 
-      * Fill data[] with...
-      *
-      * [0] = cable length
-@@ -1084,16 +987,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
-      * [10] = mdix mode
-      */
-     switch (adapter->hw.phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--             DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             if(corrected_len > 0) {
--                iegbe_oem_read_phy_reg_ex(&adapter->hw,
--                                          M88E1000_PHY_SPEC_STATUS,
-+                iegbe_oem_read_phy_reg_ex(&adapter->hw, 
-+                                          M88E1000_PHY_SPEC_STATUS, 
-                                           (uint16_t *) &data[0]);
-             }
-           if(corrected_len > 0x1){
-@@ -1106,7 +1004,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
-               data[0x3] = 0x0;  /* Dummy (to align w/ IGP phy reg dump) */
-             }
-           if(corrected_len > 0x4) {
--              iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL,
-+              iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL, 
-                                  (uint16_t *) &data[0x4]);
-             }
-           if(corrected_len > 0x5) {
-@@ -1144,7 +1042,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
-  * This is called from iegbe_set_phy_loopback in response from call from
-  * ethtool to place the PHY into loopback mode.
-  **/
--int
-+int 
- iegbe_oem_phy_loopback(struct iegbe_adapter *adapter)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1165,23 +1063,18 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-      * was that nonintegrated called iegbe_phy_reset_clk_and_crs(),
-      * hopefully this won't matter as CRS required for half-duplex
-      * operation and this is set to full duplex.
--     *
-+     * 
-      * Make note that the M88 phy is what'll be used on Truxton
-      * Loopback configuration is the same for each of the supported PHYs.
-      */
-     switch (adapter->hw.phy_id) {
--        case BCM5395S_PHY_ID:
--            DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
- 
-           adapter->hw.autoneg = FALSE;
- 
-           /* turn off Auto-MDI/MDIX */
--          /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw,
-+          /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, 
-                                                M88E1000_PHY_SPEC_CTRL, 0x0808);
-           if(ret_val)
-           {
-@@ -1206,10 +1099,10 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-               DEBUGOUT("Unable to write to register PHY_CTRL\n");
-               return ret_val;
-           }
--
--
-+          
-+          
-           /* force 1000, set loopback */
--          /*ret_val =
-+          /*ret_val = 
-                  iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x4140); */
-           ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x6100);
-           if(ret_val) {
-@@ -1228,21 +1121,21 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-           E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
- 
-           /*
--           * Write out to PHY registers 29 and 30 to disable the Receiver.
-+           * Write out to PHY registers 29 and 30 to disable the Receiver. 
-            * This directly lifted from iegbe_phy_disable_receiver().
--           *
-+           * 
-            * The code is currently commented out as for the M88 used in
-            * Truxton, registers 29 and 30 are unutilized. Leave in, just
--           * in case we are on the receiving end of an 'undocumented'
-+           * in case we are on the receiving end of an 'undocumented' 
-            * feature
-            */
--          /*
-+          /* 
-            * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001F);
-            * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FFC);
-            * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001A);
-            * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FF0);
-            */
--
-+          
-           break;
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-@@ -1268,15 +1161,15 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-  * ethtool to place the PHY out of loopback mode. This handles the OEM
-  * specific part of loopback cleanup.
-  **/
--void
-+void 
- iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter)
- {
- #ifdef EXTERNAL_MDIO
- 
--    /*
--     * This borrows liberally from iegbe_loopback_cleanup().
-+    /* 
-+     * This borrows liberally from iegbe_loopback_cleanup(). 
-      * making note that the M88 phy is what'll be used on Truxton
--     *
-+     * 
-      * Loopback cleanup is the same for all supported PHYs.
-      */
-     int32_t ret_val;
-@@ -1289,38 +1182,32 @@ iegbe_oem_loopback_cleanup(struct iegbe_
-     }
- 
-     switch (adapter->hw.phy_id) {
--        case BCM5395S_PHY_ID:
--            DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
--            return;
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
-         default:
-             adapter->hw.autoneg = TRUE;
--
--            ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL,
-+        
-+            ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL, 
-                                                 &phy_reg);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read to register PHY_CTRL\n");
-                 return;
-             }
--
-+        
-             if(phy_reg & MII_CR_LOOPBACK) {
-                 phy_reg &= ~MII_CR_LOOPBACK;
--
--                ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL,
-+        
-+                ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 
-                                                      phy_reg);
-                 if(ret_val) {
-                     DEBUGOUT("Unable to write to register PHY_CTRL\n");
-                     return;
-                 }
--
-+        
-                 iegbe_phy_reset(&adapter->hw);
-             }
-     }
--
-+        
- #endif /* ifdef EXTERNAL_MDIO */
-     return;
- 
-@@ -1336,7 +1223,7 @@ iegbe_oem_loopback_cleanup(struct iegbe_
-  * Called by iegbe_check_downshift(), checks the PHY to see if it running
-  * at as speed slower than its maximum.
-  **/
--uint32_t
-+uint32_t 
- iegbe_oem_phy_speed_downgraded(struct iegbe_hw *hw, uint16_t *isDowngraded)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1356,24 +1243,19 @@ iegbe_oem_phy_speed_downgraded(struct ie
-      */
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--           *isDowngraded = 0;
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-                                                 &phy_data);
-           if(ret_val) {
-                 DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-                 return ret_val;
-             }
--
--            *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT)
-+          
-+            *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) 
-                              >> M88E1000_PSSR_DOWNSHIFT_SHIFT;
--
--        break;
-+         
-+        break; 
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return 1;
-@@ -1388,7 +1270,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
-     }
- 
-     *isDowngraded = 0;
--    return 0;
-+    return 0; 
- 
- #endif /* ifdef EXTERNAL_MDIO */
- }
-@@ -1403,7 +1285,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
-  * Called by iegbe_check_downshift(), checks the PHY to see if it running
-  * at as speed slower than its maximum.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_check_polarity(struct iegbe_hw *hw, uint16_t *polarity)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1417,33 +1299,27 @@ iegbe_oem_check_polarity(struct iegbe_hw
-         return -1;
-     }
- 
--    /*
-+    /* 
-      * borrow liberally from iegbe_check_polarity.
-      * Make note that the M88 phy is what'll be used on Truxton
-      */
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--            *polarity = 0;
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /* return the Polarity bit in the Status register. */
--            ret_val = iegbe_oem_read_phy_reg_ex(hw,
--                                                M88E1000_PHY_SPEC_STATUS,
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-+                                                M88E1000_PHY_SPEC_STATUS, 
-                                                 &phy_data);
-             if(ret_val) {
-               DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-               return ret_val;
-             }
- 
--            *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY)
-+            *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) 
-                          >> M88E1000_PSSR_REV_POLARITY_SHIFT;
--
--         break;
--
-+          
-+         break; 
-          default:
-               DEBUGOUT("Invalid PHY ID\n");
-               return -E1000_ERR_PHY_TYPE;
-@@ -1472,7 +1348,7 @@ iegbe_oem_check_polarity(struct iegbe_hw
-  * the MAC with the PHY. It turns out on ICP_XXXX, this is not
-  * done automagically.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_phy_is_full_duplex(struct iegbe_hw *hw, int *isFD)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1485,40 +1361,22 @@ iegbe_oem_phy_is_full_duplex(struct iegb
-     if(!hw || !isFD) {
-         return -1;
-     }
--    /*
-+    /* 
-      * Make note that the M88 phy is what'll be used on Truxton
-      * see iegbe_config_mac_to_phy
-      */
--
-+        
-       switch (hw->phy_id) {
--          case BCM5395S_PHY_ID:
--              /* Always full duplex */
--              *isFD = 1;
--          break;
--
--          case BCM5481_PHY_ID:
--              ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
--              if(ret_val) return ret_val;
--
--              switch (BCM5481_ASTAT_HCD(phy_data)) {
--                  case BCM5481_ASTAT_1KBTFD:
--                  case BCM5481_ASTAT_100BTXFD:
--                      *isFD = 1;
--                  break;
--                  default:
--                      *isFD = 0;
--              }
--          break;
--
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
--              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
--              if(ret_val) {
--                  DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
--                  return ret_val;
--              }
-+             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+                                    			  &phy_data);
-+             if(ret_val) {
-+                DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-+                return ret_val;
-+             }
-               *isFD = (phy_data & M88E1000_PSSR_DPLX) != 0;
--
-+          
-            break;
-            default:
-                DEBUGOUT("Invalid PHY ID\n");
-@@ -1546,7 +1404,7 @@ iegbe_oem_phy_is_full_duplex(struct iegb
-  * the MAC with the PHY. It turns out on ICP_XXXX, this is not
-  * done automagically.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_phy_is_speed_1000(struct iegbe_hw *hw, int *is1000)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1565,28 +1423,10 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
-      */
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--            /* Always 1000mb */
--            *is1000 = 1;
--        break;
--
--        case BCM5481_PHY_ID:
--            ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
--            if(ret_val) return ret_val;
--
--            switch (BCM5481_ASTAT_HCD(phy_data)) {
--                case BCM5481_ASTAT_1KBTFD:
--                case BCM5481_ASTAT_1KBTHD:
--                    *is1000 = 1;
--                break;
--                default:
--                    *is1000 = 0;
--            }
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-+			                                    &phy_data);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-                 return ret_val;
-@@ -1638,28 +1478,9 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
-      * see iegbe_config_mac_to_phy
-      */
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--            /* Always 1000Mb, never 100mb */
--            *is100 = 0;
--        break;
--
--        case BCM5481_PHY_ID:
--            ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
--            if(ret_val) return ret_val;
--
--            switch (BCM5481_ASTAT_HCD(phy_data)) {
--                case BCM5481_ASTAT_100BTXFD:
--                case BCM5481_ASTAT_100BTXHD:
--                    *is100 = 1;
--                break;
--                default:
--                    *is100 = 0;
--            }
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-                                                 M88E1000_PHY_SPEC_STATUS,
-                                                 &phy_data);
-             if(ret_val) {
-@@ -1714,29 +1535,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-      * see iegbe_phy_m88_get_info
-      */
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--            DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            /* The downshift status is checked only once, after link is
--             * established and it stored in the hw->speed_downgraded parameter.*/
-+  /* The downshift status is checked only once, after link is
-+      * established and it stored in the hw->speed_downgraded parameter.*/
-             phy_info->downshift = (iegbe_downshift)hw->speed_downgraded;
--
--            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+    
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, 
-                                                 &phy_data);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_CTRL\n");
-                 return ret_val;
-             }
- 
--            phy_info->extended_10bt_distance =
--                (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE)
-+            phy_info->extended_10bt_distance = 
-+                (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) 
-                  >> M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT;
-             phy_info->polarity_correction =
--                (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
-+                (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) 
-                  >> M88E1000_PSCR_POLARITY_REVERSAL_SHIFT;
- 
-             /* Check polarity status */
-@@ -1747,11 +1563,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
- 
-             phy_info->cable_polarity = polarity;
- 
--            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-                                                 &phy_data);
-             if(ret_val) {
--                DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
--                return ret_val;
-+               DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-+               return ret_val;
-             }
- 
-             phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX)
-@@ -1761,24 +1577,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-                 /* Cable Length Estimation and Local/Remote Receiver Information
-                  * are only valid at 1000 Mbps.
-                  */
--                phy_info->cable_length =
-+                phy_info->cable_length = 
-                     (phy_data & M88E1000_PSSR_CABLE_LENGTH)
-                      >> M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- 
--                ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS,
-+                ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS, 
-                                                     &phy_data);
-                 if(ret_val) {
-                     DEBUGOUT("Unable to read register PHY_1000T_STATUS\n");
-                     return ret_val;
-                 }
- 
--                phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
-+                phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) 
-                                       >> SR_1000T_LOCAL_RX_STATUS_SHIFT;
--
--                phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
-+    
-+                phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) 
-                                       >> SR_1000T_REMOTE_RX_STATUS_SHIFT;
-             }
--
-+          
-         break;
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-@@ -1801,7 +1617,7 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-  * This function will perform a software initiated reset of
-  * the PHY
-  **/
--int32_t
-+int32_t 
- iegbe_oem_phy_hw_reset(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1815,18 +1631,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
-         return -1;
-     }
-     /*
--     * This code pretty much copies the default case from
-+     * This code pretty much copies the default case from 
-      * iegbe_phy_reset() as that is what is appropriate for
--     * the M88 used in truxton.
-+     * the M88 used in truxton. 
-      */
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--            DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read register PHY_CTRL\n");
-@@ -1864,7 +1675,7 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
-  * to perform and post reset initialiation. Not all PHYs require
-  * this, which is why it was split off as a seperate function.
-  **/
--void
-+void 
- iegbe_oem_phy_init_script(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1877,19 +1688,17 @@ iegbe_oem_phy_init_script(struct iegbe_h
- 
-     /* call the GCU func that can do any phy specific init
-      * functions after a reset
--     *
-+     * 
-      * Make note that the M88 phy is what'll be used on Truxton
-      *
--     * The closest thing is in iegbe_phy_init_script, however this is
-+     * The closest thing is in iegbe_phy_init_script, however this is 
-      * for the IGP style of phy. This is probably a no-op for truxton
-      * but may be needed by OEM's later on
--     *
-+     * 
-      */
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
--        case BCM5395S_PHY_ID:
-             DEBUGOUT("Nothing to do for OEM PHY Init");
-         break;
-         default:
-@@ -1926,13 +1735,8 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
-         return -1;
-     }
- 
--	if (hw->phy_id == BCM5395S_PHY_ID) {
--		DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
--		return -1;
--	}
--
-     /* call the GCU func that will read the phy
--     *
-+     * 
-      * Make note that the M88 phy is what'll be used on Truxton.
-      *
-      * The closest thing is in iegbe_read_phy_reg_ex.
-@@ -1940,7 +1744,7 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
-      * NOTE: this is 1 (of 2) functions that is truly dependant on the
-      *       gcu module
-      */
--
-+    
-         ret_val = gcu_read_eth_phy(iegbe_oem_get_phy_dev_number(hw),
-                                    reg_addr, phy_data);
-         if(ret_val) {
-@@ -1962,10 +1766,10 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
-  *
-  * Returns E1000_SUCCESS, negative E1000 error code on failure
-  *
-- * This is called from iegbe_config_mac_to_phy. Various supported
-+ * This is called from iegbe_config_mac_to_phy. Various supported 
-  * Phys may require the RGMII/RMII Translation gasket be set to RMII.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_set_trans_gasket(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1978,17 +1782,12 @@ iegbe_oem_set_trans_gasket(struct iegbe_
-     }
- 
-      switch (hw->phy_id) {
--         case BCM5395S_PHY_ID:
--         case BCM5481_PHY_ID:
--             DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
--         break;
--
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-          /* Gasket set correctly for Marvell Phys, so nothing to do */
-          break;
-          /* Add your PHY_ID here if your device requires an RMII interface
--         case YOUR_PHY_ID:
-+         case YOUR_PHY_ID: 
-              ctrl_aux_reg = E1000_READ_REG(hw, CTRL_AUX);
-              ctrl_aux_reg |= E1000_CTRL_AUX_ICP_xxxx_MII_TGS; // Set the RGMII_RMII bit
-          */
-@@ -2032,7 +1831,7 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
-         return -1;
-     }
-     /* call the GCU func that will write to the phy
--     *
-+     * 
-      * Make note that the M88 phy is what'll be used on Truxton.
-      *
-      * The closest thing is in iegbe_write_phy_reg_ex
-@@ -2062,11 +1861,11 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
-  * @hw struct iegbe_hw hardware specific data
-  *
-  * iegbe_reset_hw is called to reset the MAC. If, for
-- * some reason the PHY needs to be reset as well, this
-+ * some reason the PHY needs to be reset as well, this 
-  * should return TRUE and then iegbe_oem_phy_hw_reset()
-  * will be called.
-  **/
--int
-+int 
- iegbe_oem_phy_needs_reset_with_mac(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -2079,16 +1878,14 @@ iegbe_oem_phy_needs_reset_with_mac(struc
-         return FALSE;
-     }
- 
--    /*
-+    /* 
-      * From the original iegbe driver, the M88
--     * PHYs did not seem to need this reset,
-+     * PHYs did not seem to need this reset, 
-      * so returning FALSE.
-      */
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
--        case BCM5395S_PHY_ID:
-             ret_val = FALSE;
-         break;
-         default:
-@@ -2116,7 +1913,7 @@ iegbe_oem_phy_needs_reset_with_mac(struc
-  * tweaking of the PHY, for PHYs that support a DSP.
-  *
-  **/
--int32_t
-+int32_t 
- iegbe_oem_config_dsp_after_link_change(struct iegbe_hw *hw,
-                                        int link_up)
- {
-@@ -2138,8 +1935,6 @@ iegbe_oem_config_dsp_after_link_change(s
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--        case BCM5481_PHY_ID:
--        case BCM5395S_PHY_ID:
-             DEBUGOUT("No DSP to configure on OEM PHY");
-         break;
-         default:
-@@ -2165,7 +1960,7 @@ iegbe_oem_config_dsp_after_link_change(s
-  *
-  *
-  **/
--int32_t
-+int32_t 
- iegbe_oem_get_cable_length(struct iegbe_hw *hw,
-                            uint16_t *min_length,
-                            uint16_t *max_length)
-@@ -2177,21 +1972,15 @@ iegbe_oem_get_cable_length(struct iegbe_
-     uint16_t phy_data;
- 
-    DEBUGFUNC1("%s",__func__);
--
-+    
-     if(!hw || !min_length || !max_length) {
-         return -1;
-     }
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--        case BCM5481_PHY_ID:
--			*min_length = 0;
--			*max_length = iegbe_igp_cable_length_150;
--        break;
--
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-                                                 M88E1000_PHY_SPEC_STATUS,
-                                                 &phy_data);
-             if(ret_val) {
-@@ -2246,13 +2035,13 @@ iegbe_oem_get_cable_length(struct iegbe_
- /**
-  * iegbe_oem_phy_is_link_up
-  * @hw iegbe_hw struct containing device specific information
-- * @isUp a boolean returning true if link is up
-+ * @isUp a boolean returning true if link is up 
-  *
-  * This is called as part of iegbe_config_mac_to_phy() to align
-  * the MAC with the PHY. It turns out on ICP_XXXX, this is not
-  * done automagically.
-  **/
--int32_t
-+int32_t 
- iegbe_oem_phy_is_link_up(struct iegbe_hw *hw, int *isUp)
- {
- #ifdef EXTERNAL_MDIO
-@@ -2266,35 +2055,19 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
-     if(!hw || !isUp) {
-         return -1;
-     }
--    /*
-+    /* 
-      * Make note that the M88 phy is what'll be used on Truxton
-      * see iegbe_config_mac_to_phy
-      */
- 
-     switch (hw->phy_id) {
--        case BCM5395S_PHY_ID:
--            /* Link always up */
--            *isUp = TRUE;
--            return E1000_SUCCESS;
--        break;
--
--        case BCM5481_PHY_ID:
--			iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
--			ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
--			if(ret_val)
--			{
--			  DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
--			  return ret_val;
--			}
--            statusMask = BCM5481_ESTAT_LINK;
--		break;
--
--		case M88E1000_I_PHY_ID:
-+        case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
--            iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
--            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+            iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); 
-+            ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-+			                                    &phy_data);
-             statusMask = M88E1000_PSSR_LINK;
--        break;
-+        break; 
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return -E1000_ERR_PHY_TYPE;
-@@ -2319,213 +2092,3 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
--
--
--//-----
--//	Read BCM5481 expansion register
--//
--int32_t
--bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
--{
--	int			ret;
--	uint16_t	selector;
--	uint16_t	reg_data;
--
--	// Get the current value of bits 15:12
--	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
--	if (ret)
--		return ret;
--
--	// Select the expansion register
--	selector &= 0xf000;
--	selector |= (0xf << 8) | (reg);
--	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
--
--	// Read the expansion register
--	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
--
--	// De-select the expansion registers.
--	selector &= 0xf000;
--	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
--
--	if (ret)
--		return ret;
--
--	*data = reg_data;
--	return ret;
--}
--
--//-----
--//	Read reg 0x18 sub-register
--//
--static int32_t
--bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
--{
--	int	ret;
--	uint16_t	tmp_data;
--
--	// Select reg 0x18, sv
--	tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
--    if(ret)
--        return ret;
--
--	// Read reg 0x18, sv
--	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
--    if(ret)
--        return ret;
--
--	*data = tmp_data;
--	return ret;
--}
--
--//-----
--//	Read reg 0x1C sub-register
--//
--int32_t
--bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
--{
--	int	ret;
--	uint16_t	tmp_data;
--
--	// Select reg 0x1c, sv
--	tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
--
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
--    if(ret)
--        return ret;
--
--	// Read reg 0x1c, sv
--	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
--    if(ret)
--        return ret;
--
--	*data = tmp_data;
--	return ret;
--}
--
--//-----
--//	Read-modify-write a 0x1C register.
--//
--//	hw   - hardware access info.
--//	reg  - 0x1C register to modify.
--//	data - bits which should be set.
--//	mask - the '1' bits in this argument will be cleared in the data
--//         read from 'reg' then 'data' will be or'd in and the result
--//         will be written to 'reg'.
--
--int32_t
--bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
--{
--	int32_t		ret;
--	uint16_t	reg_data;
--
--	ret = 0;
--
--	ret = bcm5481_read_1csv (hw, reg, &reg_data);
--	if (ret)
--    {
--        DEBUGOUT("Unable to read BCM5481 1CH register\n");
--        printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
--        return ret;
--    }
--
--	reg_data &= ~mask;
--	reg_data |= (BCM5481_R1CH_WE | data);
--
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
--    if(ret)
--    {
--        DEBUGOUT("Unable to write BCM5481 1CH register\n");
--        printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
--        return ret;
--    }
--
--	return ret;
--}
--
--int32_t
--oi_phy_setup (struct iegbe_hw *hw)
--{
--	int	ret;
--	uint16_t	pmii_data;
--	uint16_t	mctrl_data;
--	uint16_t	cacr_data;
--	uint16_t	sc1_data;
--	uint16_t	lctl_data;
--
--	ret = 0;
--
--	// Set low power mode via reg 0x18, sv010, bit 6
--	// Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
--	ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
--	if (ret)
--    {
--        DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
--        printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
--        return ret;
--    }
--
--	// Set the LPM bit in the data just read and write back to sv010
--	// The shadow register select bits [2:0] are set by reading the sv010
--	// register.
--	pmii_data |= BCM5481_R18H_SV010_LPM;
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
--    if(ret)
--    {
--        DEBUGOUT("Unable to write BCM5481_R18H register\n");
--        printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
--        return ret;
--    }
--
--
--	// Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
--
--	if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
--    {
--        DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
--        printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
--        return ret;
--    }
--	mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
--
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
--    if(ret)
--    {
--        DEBUGOUT("Unable to write BCM5481_R18H register\n");
--        printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
--        return ret;
--    }
--
--
--	// Enable RGMII transmit clock delay in reg 0x1c, sv00011
--	ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
--	if (ret)
--    {
--        DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
--        printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
--        return ret;
--    }
--
--	cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
--
--	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
--    if(ret)
--    {
--        DEBUGOUT("Unable to write BCM5481_R1CH register\n");
--        printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
--        return ret;
--    }
--
--	// Enable dual link speed indication (0x1c, sv 00010, bit 2)
--	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
--	if (ret)
--		return ret;
--
--	// Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
--	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
--	if (ret)
--		return ret;
--
--	return ret;
--}
---- a/Embedded/src/GbE/iegbe_oem_phy.h
-+++ b/Embedded/src/GbE/iegbe_oem_phy.h
-@@ -2,31 +2,31 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
--  This program is free software; you can redistribute it and/or modify
-+  This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-   published by the Free Software Foundation.
- 
--  This program is distributed in the hope that it will be useful, but
--  WITHOUT ANY WARRANTY; without even the implied warranty of
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+  This program is distributed in the hope that it will be useful, but 
-+  WITHOUT ANY WARRANTY; without even the implied warranty of 
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
-   General Public License for more details.
- 
--  You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
-+  You should have received a copy of the GNU General Public License 
-+  along with this program; if not, write to the Free Software 
-   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--  The full GNU General Public License is included in this distribution
-+  The full GNU General Public License is included in this distribution 
-   in the file called LICENSE.GPL.
- 
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
--
--  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-+  
-+  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226 
- 
- *******************************************************************************/
- #ifndef _IEGBE_OEM_PHY_H_
-@@ -45,10 +45,10 @@ int32_t iegbe_oem_set_trans_gasket(struc
- uint32_t iegbe_oem_get_tipg(struct iegbe_hw *hw);
- int iegbe_oem_phy_is_copper(struct iegbe_hw *hw);
- uint32_t iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw);
--int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
-+int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags, 
-                         struct ifreq *ifr, int cmd);
- void iegbe_oem_fiber_live_in_suspend(struct iegbe_hw *hw);
--void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
-+void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data, 
-                             uint32_t data_length);
- int iegbe_oem_phy_loopback(struct iegbe_adapter *adapter);
- void iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter);
-@@ -94,81 +94,14 @@ int32_t iegbe_oem_phy_is_link_up(struct
- #define ICP_XXXX_MAC_2 2
- 
- #define DEFAULT_ICP_XXXX_TIPG_IPGT 8      /* Inter Packet Gap Transmit Time */
--#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
--#define	BCM5481_PHY_ID		0x0143BCA2
--#define	BCM5395S_PHY_ID		0x0143BCF0
-+#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL 
- 
- /* Miscellaneous defines */
- #ifdef IEGBE_10_100_ONLY
--    #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x0F
-+    #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x0F 
- #else
-     #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x2F
- #endif
- 
--//-----
--// BCM5481 specifics
--
--#define    BCM5481_ECTRL		   (0x10)
--#define    BCM5481_ESTAT		   (0x11)
--#define    BCM5481_RXERR		   (0x12)
--#define    BCM5481_EXPRW		   (0x15)
--#define    BCM5481_EXPACC		   (0x17)
--#define    BCM5481_ASTAT		   (0x19)
--#define    BCM5481_R18H 		   (0x18)
--#define    BCM5481_R1CH 		   (0x1c)
--
--//-----
--// indirect register access via register 18h
--
--#define    BCM5481_R18H_SV_MASK    (7) // Mask for SV bits.
--#define    BCM5481_R18H_SV_ACTRL   (0) // SV000 Aux. control
--#define    BCM5481_R18H_SV_10BT    (1) // SV001 10Base-T
--#define    BCM5481_R18H_SV_PMII    (2) // SV010 Power/MII control
--#define    BCM5481_R18H_SV_MTEST   (4) // SV100 Misc. test
--#define    BCM5481_R18H_SV_MCTRL   (7) // SV111 Misc. control
--
--#define    BCM5481_R18H_SV001_POL  (1 << 13)   // Polarity
--#define    BCM5481_R18H_SV010_LPM  (1 << 6)
--#define    BCM5481_R18H_SV111_SKEW (1 << 8)
--#define    BCM5481_R18H_WE  	   (1 << 15)   // Write enable
--
--// 0x1c registers
--#define    BCM5481_R1CH_SV_SHIFT	   (10)
--#define    BCM5481_R1CH_SV_MASK 	   (0x1f)
--#define    BCM5481_R1CH_SC1 		   (0x02)	   // sv00010 Spare control 1
--#define    BCM5481_R1CH_CACR		   (0x03)	   // sv00011 Clock alignment control
--#define    BCM5481_R1CH_LCTRL		   (0x09)	   // sv01001 LED control
--#define    BCM5481_R1CH_LEDS1		   (0x0d)	   // sv01101 LED selector 1
--
--// 0x1c common
--#define    BCM5481_R1CH_WE  		   (1 << 15)   // Write enable
--
--// 0x1c, sv 00010
--#define    BCM5481_R1CH_SC1_LINK	   (1 << 2)    // sv00010 Linkspeed
--
--// 0x1c, sv 00011
--#define    BCM5481_R1CH_CACR_TCD	   (1 << 9)    // sv00011 RGMII tx clock delay
--
--// 0x1c, sv 01001
--#define    BCM5481_R1CH_LCTRL_ALEN     (1 << 4)    // Activity/Link enable on ACTIVITY LED
--#define    BCM5481_R1CH_LCTRL_AEN	   (1 << 3)    // Activity enable on ACTIVITY LED
--
--
--#define    BCM5481_ECTRL_DISMDIX   (1 <<14)
--
--#define    BCM5481_MCTRL_AUTOMDIX  (1 <<9)
--
--#define    BCM5481_ESTAT_LINK	   (1 << 8)
--
--#define    BCM5481_ASTAT_ANC	   (1 << 15)
--#define    BCM5481_ASTAT_ANHCD     (7 << 8)
--#define    BCM5481_ASTAT_HCD(x)    ((x >> 8) & 7)
--#define    BCM5481_ASTAT_1KBTFD    (0x7)
--#define    BCM5481_ASTAT_1KBTHD    (0x6)
--#define    BCM5481_ASTAT_100BTXFD  (0x5)
--#define    BCM5481_ASTAT_100BTXHD  (0x3)
--
--// end BCM5481 specifics
--
- #endif /* ifndef _IEGBE_OEM_PHY_H_ */
--
-+ 
---- a/Embedded/src/GbE/iegbe_osdep.h
-+++ b/Embedded/src/GbE/iegbe_osdep.h
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
---- a/Embedded/src/GbE/iegbe_param.c
-+++ b/Embedded/src/GbE/iegbe_param.c
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
- 
-   Contact Information:
- 
-@@ -239,11 +239,7 @@ E1000_PARAM(InterruptThrottleRate, "Inte
- #define MAX_TXABSDELAY            0xFFFF
- #define MIN_TXABSDELAY                 0
- 
--#ifdef IEGBE_GBE_WORKAROUND
--#define DEFAULT_ITR                 0
--#else
- #define DEFAULT_ITR                 8000
--#endif
- 
- 
- #define MAX_ITR                   100000
-@@ -373,7 +369,7 @@ iegbe_check_options(struct iegbe_adapter
-             tx_ring->count = opt.def;
-         }
- #endif
--        for (i = 0; i < adapter->num_queues; i++)
-+		for (i = 0; i < adapter->num_tx_queues; i++)
-             tx_ring[i].count = tx_ring->count;
-     }
-     { /* Receive Descriptor Count */
-@@ -403,7 +399,7 @@ iegbe_check_options(struct iegbe_adapter
-             rx_ring->count = opt.def;
-         }
- #endif
--        for (i = 0; i < adapter->num_queues; i++)
-+		for (i = 0; i < adapter->num_rx_queues; i++)
-             rx_ring[i].count = rx_ring->count;
-     }
-     { /* Checksum Offload Enable/Disable */
---- a/Embedded/src/GbE/kcompat.c
-+++ b/Embedded/src/GbE/kcompat.c
-@@ -1,8 +1,8 @@
--/************************************************************
--
-+/************************************************************
-+
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,183 +22,192 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
--  
--  Contact Information:
--  
--  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226 
--
--**************************************************************/
--/**************************************************************************
-- * @ingroup KCOMPAT_GENERAL
-- *
-- * @file kcompat.c
-- *
-- * @description
-- *   
-- *
-- **************************************************************************/
--#include "kcompat.h"
--
--/*************************************************************/
--/* 2.4.13 => 2.4.3 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
--
--/**************************************/
--/* PCI DMA MAPPING */
--
--#if defined(CONFIG_HIGHMEM)
--
--#ifndef PCI_DRAM_OFFSET
--#define PCI_DRAM_OFFSET 0
--#endif
--
--u64 _kc_pci_map_page(struct pci_dev *dev, 
--                     struct page *page, 
--                     unsigned long offset, 
--                     size_t size, 
--                     int direction)
--{
--    u64 ret_val;
--    ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset + 
--                 PCI_DRAM_OFFSET);
--    return ret_val;
--}
--
--#else /* CONFIG_HIGHMEM */
--
--u64 _kc_pci_map_page(struct pci_dev *dev, 
--                     struct page *page, 
--                     unsigned long offset, 
--                     size_t size, 
--                     int direction)
--{
--    return pci_map_single(dev, (void *)page_address(page) + offset,
--        size, direction);
--}
--
--#endif /* CONFIG_HIGHMEM */
--
--void _kc_pci_unmap_page(struct pci_dev *dev, 
--                        u64 dma_addr, 
--                        size_t size, 
--                        int direction)
--{
--    return pci_unmap_single(dev, dma_addr, size, direction);
--}
--
--#endif /* 2.4.13 => 2.4.3 */
--
--
--/*****************************************************************************/
--/* 2.4.3 => 2.4.0 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
--
--/**************************************/
--/* PCI DRIVER API */
--
--int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
--{
--    if(!pci_dma_supported(dev, mask)) {
--        return -EIO;
--    }          
--    dev->dma_mask = mask;
--    return 0;
--}
--
--int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
--{
--    int i;
--
--    for (i = 0; i < 0x6; i++) {
--        if (pci_resource_len(dev, i) == 0) {
--            continue;
--        }
--        if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
--            if (!request_region(pci_resource_start(dev, i),
--                pci_resource_len(dev, i), res_name)) {
--                pci_release_regions(dev);
--                return -EBUSY;
--            }
--        } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
--            if (!request_mem_region(pci_resource_start(dev, i), 
--                pci_resource_len(dev, i),
--                res_name)) {
--                pci_release_regions(dev);
--                return -EBUSY;
--            }
--        }
--    }
--    return 0;
--}
--
--void _kc_pci_release_regions(struct pci_dev *dev)
--{
--    int i;
--
--    for (i = 0; i < 0x6; i++) {
--        if (pci_resource_len(dev, i) == 0) {
--            continue;
--        }
--        if (pci_resource_flags(dev, i) & IORESOURCE_IO){
--            release_region(pci_resource_start(dev, i),
--                       pci_resource_len(dev, i));
--        } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
--            release_mem_region(pci_resource_start(dev, i),
--                           pci_resource_len(dev, i));
--          }        
--    }
--}
--
--/**************************************/
--/* NETWORK DRIVER API */
--
--struct net_device * _kc_alloc_etherdev(int sizeof_priv)
--{
--    struct net_device *dev;
--    int alloc_size;
--
--    alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
--
--    dev = kmalloc(alloc_size, GFP_KERNEL);
--
--    if (!dev) { return NULL; }
--
--    memset(dev, 0, alloc_size);
--
--    if (sizeof_priv) {
--        dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
--    }
--    dev->name[0] = '\0';
--
--    ether_setup(dev);
--
--    return dev;
--}
--
--int _kc_is_valid_ether_addr(u8 *addr)
--{
--    const char zaddr[0x6] = {0,};
--
--    return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
--}
--
--#endif /* 2.4.3 => 2.4.0 */
--
--
--/*****************************************************************/
--/* 2.4.6 => 2.4.3 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
--
--int _kc_pci_set_power_state(struct pci_dev *dev, int state)
--{ return 0; }
--int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
--{ return 0; }
--int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
--{ return 0; }
--int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
--{ return 0; }
--
--#endif /* 2.4.6 => 2.4.3 */
--
-- 
-+ version: Embedded.Release.Patch.L.1.0.7-5
-+  
-+  Contact Information:
-+  
-+  Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226 
-+
-+**************************************************************/
-+/**************************************************************************
-+ * @ingroup KCOMPAT_GENERAL
-+ *
-+ * @file kcompat.c
-+ *
-+ * @description
-+ *   
-+ *
-+ **************************************************************************/
-+#include "kcompat.h"
-+
-+/*************************************************************/
-+/* 2.4.13 => 2.4.3 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
-+
-+/**************************************/
-+/* PCI DMA MAPPING */
-+
-+#if defined(CONFIG_HIGHMEM)
-+
-+#ifndef PCI_DRAM_OFFSET
-+#define PCI_DRAM_OFFSET 0
-+#endif
-+
-+u64 _kc_pci_map_page(struct pci_dev *dev, 
-+                     struct page *page, 
-+                     unsigned long offset, 
-+                     size_t size, 
-+                     int direction)
-+{
-+    u64 ret_val;
-+    ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset + 
-+                 PCI_DRAM_OFFSET);
-+    return ret_val;
-+}
-+
-+#else /* CONFIG_HIGHMEM */
-+
-+u64 _kc_pci_map_page(struct pci_dev *dev, 
-+                     struct page *page, 
-+                     unsigned long offset, 
-+                     size_t size, 
-+                     int direction)
-+{
-+    return pci_map_single(dev, (void *)page_address(page) + offset,
-+        size, direction);
-+}
-+
-+#endif /* CONFIG_HIGHMEM */
-+
-+void _kc_pci_unmap_page(struct pci_dev *dev, 
-+                        u64 dma_addr, 
-+                        size_t size, 
-+                        int direction)
-+{
-+    return pci_unmap_single(dev, dma_addr, size, direction);
-+}
-+
-+#endif /* 2.4.13 => 2.4.3 */
-+
-+
-+/*****************************************************************************/
-+/* 2.4.3 => 2.4.0 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
-+
-+/**************************************/
-+/* PCI DRIVER API */
-+
-+int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
-+{
-+    if(!pci_dma_supported(dev, mask)) {
-+        return -EIO;
-+    }          
-+    dev->dma_mask = mask;
-+    return 0;
-+}
-+
-+int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
-+{
-+    int i;
-+
-+    for (i = 0; i < 0x6; i++) {
-+        if (pci_resource_len(dev, i) == 0) {
-+            continue;
-+        }
-+        if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
-+            if (!request_region(pci_resource_start(dev, i),
-+                pci_resource_len(dev, i), res_name)) {
-+                pci_release_regions(dev);
-+                return -EBUSY;
-+            }
-+        } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-+            if (!request_mem_region(pci_resource_start(dev, i), 
-+                pci_resource_len(dev, i),
-+                res_name)) {
-+                pci_release_regions(dev);
-+                return -EBUSY;
-+            }
-+        }
-+    }
-+    return 0;
-+}
-+
-+void _kc_pci_release_regions(struct pci_dev *dev)
-+{
-+    int i;
-+
-+    for (i = 0; i < 0x6; i++) {
-+        if (pci_resource_len(dev, i) == 0) {
-+            continue;
-+        }
-+        if (pci_resource_flags(dev, i) & IORESOURCE_IO){
-+            release_region(pci_resource_start(dev, i),
-+                       pci_resource_len(dev, i));
-+        } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-+            release_mem_region(pci_resource_start(dev, i),
-+                           pci_resource_len(dev, i));
-+          }        
-+    }
-+}
-+
-+/**************************************/
-+/* NETWORK DRIVER API */
-+
-+struct net_device * _kc_alloc_etherdev(int sizeof_priv)
-+{
-+    struct net_device *dev;
-+    int alloc_size;
-+
-+    alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
-+
-+    dev = kmalloc(alloc_size, GFP_KERNEL);
-+
-+    if (!dev) { return NULL; }
-+
-+    memset(dev, 0, alloc_size);
-+
-+    if (sizeof_priv) {
-+        dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
-+    }
-+    dev->name[0] = '\0';
-+
-+    ether_setup(dev);
-+
-+    return dev;
-+}
-+
-+int _kc_is_valid_ether_addr(u8 *addr)
-+{
-+    const char zaddr[0x6] = {0,};
-+
-+    return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
-+}
-+
-+#endif /* 2.4.3 => 2.4.0 */
-+
-+
-+/*****************************************************************/
-+/* 2.4.6 => 2.4.3 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
-+
-+int _kc_pci_set_power_state(struct pci_dev *dev, int state)
-+{ return 0; }
-+int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{ return 0; }
-+int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
-+{ return 0; }
-+int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
-+{ return 0; }
-+
-+#endif /* 2.4.6 => 2.4.3 */
-+
-+ 
-+
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
-+
-+void dump_stack(void)
-+{
-+}
-+
-+#endif /* 2.4.24 */
-+
---- a/Embedded/src/GbE/kcompat_ethtool.c
-+++ b/Embedded/src/GbE/kcompat_ethtool.c
-@@ -2,7 +2,7 @@
- /*
-  * GPL LICENSE SUMMARY
-  * 
-- *   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-  * 
-  *   This program is free software; you can redistribute it and/or modify 
-  *   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@
-  *   Contact Information:
-  *   Intel Corporation
-  * 
-- *  version: Embedded.L.1.0.34
-+ *  version: Embedded.Release.Patch.L.1.0.7-5
-  */
-   
- /**************************************************************************
-@@ -779,6 +779,7 @@ static int ethtool_get_stats(struct net_
- }
- 
- /* The main entry point in this file.  Called from net/core/dev.c */
-+
- #define ETHTOOL_OPS_COMPAT
- int ethtool_ioctl(struct ifreq *ifr)
- {
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -2,7 +2,7 @@
- 
- GPL LICENSE SUMMARY
- 
--  Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+  Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- 
-   This program is free software; you can redistribute it and/or modify 
-   it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
-   Contact Information:
-   Intel Corporation
- 
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-   
-   Contact Information:
-   
-@@ -69,15 +69,6 @@ GPL LICENSE SUMMARY
- #define CONFIG_NET_POLL_CONTROLLER
- #endif
- 
--#ifdef E1000_NAPI
--#undef CONFIG_E1000_NAPI
--#define CONFIG_E1000_NAPI
--#endif
--
--#ifdef E1000_NO_NAPI
--#undef CONFIG_E1000_NAPI
--#endif
--
- #ifndef module_param
- #define module_param(v,t,p) MODULE_PARM(v, "i");
- #endif
-@@ -554,35 +545,14 @@ extern void _kc_pci_unmap_page(struct pc
- #endif
- 
- /*****************************************************************************/
--/* 2.4.23 => 2.4.22 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
--#ifdef CONFIG_E1000_NAPI
--#ifndef netif_poll_disable
--#define netif_poll_disable(x) _kc_netif_poll_disable(x)
--static inline void _kc_netif_poll_disable(struct net_device *netdev)
--{
--	while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) {
--		/* No hurry */
--		current->state = TASK_INTERRUPTIBLE;
--		schedule_timeout(1);
--	}
--}
--#endif
--#ifndef netif_poll_enable
--#define netif_poll_enable(x) _kc_netif_poll_enable(x)
--static inline void _kc_netif_poll_enable(struct net_device *netdev)
--{
--	clear_bit(__LINK_STATE_RX_SCHED, &netdev->state);
--}
--#endif
--#endif
--#endif
--
--/*****************************************************************************/
- /* 2.5.28 => 2.4.23 */
- #if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) )
- 
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
-+static inline void _kc_synchronize_irq(void) { barrier(); }
-+#else
- static inline void _kc_synchronize_irq() { synchronize_irq(); }
-+#endif /* 2.4.23 */
- #undef synchronize_irq
- #define synchronize_irq(X) _kc_synchronize_irq()
- 
-@@ -747,6 +717,37 @@ static inline struct mii_ioctl_data *_kc
- #define skb_header_cloned(x) 0
- #endif /* SKB_DATAREF_SHIFT not defined */
- 
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
-+
-+#define ioread32(addr)			readl(addr)
-+#define iowrite32(val,addr)		writel(val,addr)
-+
-+#endif /* 2.6.10 */
-+
-+#ifndef DEFINE_SPINLOCK
-+#define DEFINE_SPINLOCK(s)	spinlock_t s = SPIN_LOCK_UNLOCKED
-+#endif /* DEFINE_SPINLOCK */
-+
-+#ifndef PCI_COMMAND_INTX_DISABLE
-+#define PCI_COMMAND_INTX_DISABLE	0x400 /* INTx Emulation Disable */
-+#endif /* PCI_COMMAND_INTX_DISABLE */
-+
-+#ifndef ETH_GSTRING_LEN
-+#define ETH_GSTRING_LEN	32
-+#endif /* ETH_GSTRING_LEN */
-+
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
-+
-+extern void dump_stack(void);
-+
-+#undef  register_reboot_notifier
-+#define register_reboot_notifier(a)
-+
-+#undef  unregister_reboot_notifier
-+#define unregister_reboot_notifier(a)
-+
-+#endif /* 2.4.24 */
-+
- #endif /* _KCOMPAT_H_ */
- 
-  
---- a/Embedded/src/GbE/Makefile
-+++ b/Embedded/src/GbE/Makefile
-@@ -1,6 +1,6 @@
- # GPL LICENSE SUMMARY
- # 
--#   Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+#   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- # 
- #   This program is free software; you can redistribute it and/or modify 
- #   it under the terms of version 2 of the GNU General Public License as
-@@ -20,7 +20,7 @@
- #   Contact Information:
- #   Intel Corporation
- # 
--#  version: Embedded.L.1.0.34
-+#  version: Embedded.Release.Patch.L.1.0.7-5
- 
- ###########################################################################
- # Driver files
-@@ -35,6 +35,8 @@ MDIO_PHONY_CFILES = gcu.c
- MDIO_CFILES = gcu_main.c gcu_if.c
- MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h kcompat.h
- 
-+KVER=$(shell uname -r)
-+
- #
- # Variables:
- #           KSRC (path to kernel source to build against)
-@@ -50,45 +52,16 @@ MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h k
- 
- # set KSRC, KOBJ, and EXTERNAL_MDIO to default values of not already set
- #
--KOBJ ?= /usr/src/kernels/linux
--KSRC ?= /usr/src/kernels/linux
-+#KOBJ=/usr/src/kernels/linux
-+#KSRC=/usr/src/kernels/linux
-+#KSRC=$(KOBJ)
- EXTERNAL_MDIO ?= 1
- GBE_NAME = iegbe
- GCU_NAME = gcu
- 
--# By default the workaround for the IEGBE writeback issue is enabled
--# 
--IEGBE_GBE_WORKAROUND ?= 0
--
--# If the platform only supports 10/100 this variable needs to be set
--# so the default advertisement is set appropriately. 
--# By default, this variable will be disabled.
--# 
--IEGBE_10_100_ONLY ?= 0
--
--# check for version.h and autoconf.h for running kernel in /boot (SUSE)
--ifneq (,$(wildcard /boot/vmlinuz.version.h))
--  VERSION_FILE := /boot/vmlinuz.version.h
--  CONFIG_FILE  := /boot/vmlinuz.autoconf.h
--  KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | \
--          grep UTS_RELEASE | awk '{ print $$3 }' | sed 's/\"//g')
--  ifeq ($(KVER),$(shell uname -r))
--    # set up include path to override headers from kernel source
--    x:=$(shell rm -rf include)
--    x:=$(shell mkdir -p include/linux)
--    x:=$(shell cp /boot/vmlinuz.version.h include/linux/version.h)
--    x:=$(shell cp /boot/vmlinuz.autoconf.h include/linux/autoconf.h)
--    CFLAGS += -I./include
--  else
--    VERSION_FILE := $(KOBJ)/include/linux/version.h
--    UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--    CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
--  endif
--else
--  VERSION_FILE := $(KOBJ)/include/linux/version.h
--  UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--  CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
--endif
-+VERSION_FILE := $(KSRC)/include/linux/version.h
-+UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-+CONFIG_FILE  := $(KSRC)/include/linux/autoconf.h
- 
- ifeq (,$(wildcard $(VERSION_FILE)))
-   $(error Linux kernel source not configured - missing version.h)
-@@ -98,83 +71,8 @@ ifeq (,$(wildcard $(CONFIG_FILE)))
-   $(error Linux kernel source not configured - missing autoconf.h)
- endif
- 
--# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--# so check that file for kernel version string instead of version.h
--USE_UTS_REL := $(shell [ -f $(UTS_REL_FILE) ] && echo "1")
--
--# pick a compiler
--ifneq (,$(findstring egcs-2.91.66, $(shell cat /proc/version)))
--  CC := kgcc gcc cc
--else
--  CC := gcc cc
--endif
--test_cc = $(shell $(cc) --version > /dev/null 2>&1 && echo $(cc))
--CC := $(foreach cc, $(CC), $(test_cc))
--CC := $(firstword $(CC))
--ifeq (,$(CC))
--  $(error Compiler not found)
--endif
--
--# we need to know what platform the driver is being built on
--# some additional features are only built on Intel platforms
--ARCH := $(shell uname -m | sed 's/i.86/i386/')
--ifeq ($(ARCH),alpha)
--  CFLAGS += -ffixed-8 -mno-fp-regs
--endif
--ifeq ($(ARCH),x86_64)
--  CFLAGS += -mcmodel=kernel -mno-red-zone
--endif
--ifeq ($(ARCH),ppc)
--  CFLAGS += -msoft-float
--endif
--ifeq ($(ARCH),ppc64)
--  CFLAGS += -m64 -msoft-float
--  LDFLAGS += -melf64ppc
--endif
--
--# standard flags for module builds
--CFLAGS += -DLINUX -D__KERNEL__ -DMODULE -O2 -pipe -Wall
--CFLAGS += -I$(KSRC)/include -I.
--CFLAGS += $(shell [ -f $(KSRC)/include/linux/modversions.h ] && \
--            echo "-DMODVERSIONS -DEXPORT_SYMTAB \
--                  -include $(KSRC)/include/linux/modversions.h")
--
--ifeq ($(IEGBE_GBE_WORKAROUND), 1)
--CFLAGS += -DIEGBE_GBE_WORKAROUND -DE1000_NO_NAPI 
--endif
--
--ifeq ($(IEGBE_10_100_ONLY), 1)
--CFLAGS += -DIEGBE_10_100_ONLY 
--endif
--
--CFLAGS += $(CFLAGS_EXTRA)
--#ifeq (,$(shell echo $(CFLAGS_EXTRA) | grep NAPI))
--#CFLAGS += -DE1000_NO_NAPI
--#CFLAGS_EXTRA += -DE1000_NO_NAPI
--#endif
--
--RHC := $(KSRC)/include/linux/rhconfig.h
--ifneq (,$(wildcard $(RHC)))
--  # 7.3 typo in rhconfig.h
--  ifneq (,$(shell $(CC) $(CFLAGS) -E -dM $(RHC) | grep __module__bigmem))
--	CFLAGS += -D__module_bigmem
--  endif
--endif
--
--# get the kernel version - we use this to find the correct install path
--ifeq ($(USE_UTS_REL), 1)
--  KVER := $(shell $(CC) $(CFLAGS) -E -dM $(UTS_REL_FILE) | grep UTS_RELEASE | \
--          awk '{ print $$3 }' | sed 's/\"//g')
--else
--  KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | grep UTS_RELEASE | \
--          awk '{ print $$3 }' | sed 's/\"//g')
--endif
--
--KKVER := $(shell echo $(KVER) | \
--         awk '{ if ($$0 ~ /2\.[6-9]\./) print "1"; else print "0"}')
--ifeq ($(KKVER), 0)
--  $(error *** Aborting the build. \
--          *** This driver is not supported on kernel versions older than 2.6.18)
-+ifeq (,$(wildcard $(UTS_REL_FILE)))
-+  $(error Linux kernel source not configured - missing utsrelease.h)
- endif
- 
- # set the install path
-@@ -202,11 +100,11 @@ ifneq ($(SMP),$(shell uname -a | grep SM
- endif
- 
- ifeq ($(SMP),1)
--  CFLAGS += -D__SMP__
-+  EXTRA_CFLAGS += -D__SMP__
- endif
- 
- ifeq ($(EXTERNAL_MDIO), 1)
--  CFLAGS += -DEXTERNAL_MDIO
-+  EXTRA_CFLAGS += -DEXTERNAL_MDIO
- endif
- 
- ###########################################################################
-@@ -223,7 +121,6 @@ MANSECTION = 7
- MANFILE = $(TARGET:.ko=.$(MANSECTION))
- 
- ifneq ($(PATCHLEVEL),)
--  EXTRA_CFLAGS += $(CFLAGS_EXTRA)
-   obj-m += $(TARGET:.ko=.o)
-   iegbe-objs := $(CFILES:.c=.o)
-   ifeq ($(EXTERNAL_MDIO),1)
---- a/filelist
-+++ b/filelist
-@@ -1,41 +1,3 @@
--Embedded/Makefile
--Embedded/environment.mk
--Embedded/src/1588/1588.c
--Embedded/src/1588/1588.h
--Embedded/src/1588/IxTimeSyncAcc_p.h
--Embedded/src/1588/Makefile
--Embedded/src/1588/ixtimesyncacc.c
--Embedded/src/1588/ixtimesyncacc.h
--Embedded/src/1588/linux_ioctls.h
--Embedded/src/CAN/Makefile
--Embedded/src/CAN/can_fifo.c
--Embedded/src/CAN/can_fifo.h
--Embedded/src/CAN/can_ioctl.h
--Embedded/src/CAN/can_main.c
--Embedded/src/CAN/can_main.h
--Embedded/src/CAN/can_port.h
--Embedded/src/CAN/icp_can.c
--Embedded/src/CAN/icp_can.h
--Embedded/src/CAN/icp_can_regs.h
--Embedded/src/CAN/icp_can_types.h
--Embedded/src/CAN/icp_can_user.h
--Embedded/src/EDMA/Makefile
--Embedded/src/EDMA/dma.h
--Embedded/src/EDMA/dma_api.h
--Embedded/src/EDMA/dma_client_api.c
--Embedded/src/EDMA/dma_common.c
--Embedded/src/EDMA/dma_internals.h
--Embedded/src/EDMA/dma_linux.c
--Embedded/src/EDMA/os/os.c
--Embedded/src/EDMA/os/os.h
--Embedded/src/EDMA/os/os_list.c
--Embedded/src/EDMA/os/os_list.h
--Embedded/src/EDMA/os/os_types.h
--Embedded/src/GPIO/Makefile
--Embedded/src/GPIO/common.h
--Embedded/src/GPIO/gpio.h
--Embedded/src/GPIO/gpio_ref.c
--Embedded/src/GPIO/linux_ioctls.h
- Embedded/src/GbE/Makefile
- Embedded/src/GbE/gcu.h
- Embedded/src/GbE/gcu_if.c
-@@ -55,16 +17,6 @@ Embedded/src/GbE/iegbe_param.c
- Embedded/src/GbE/kcompat.c
- Embedded/src/GbE/kcompat.h
- Embedded/src/GbE/kcompat_ethtool.c
--Embedded/src/WDT/Makefile
--Embedded/src/WDT/iwdt.c
--Embedded/src/WDT/iwdt.h
--Embedded/src/patches/Intel_EP80579_RHEL5.patch
--Embedded/src/patches/pci.ids_RHEL5.patch
- LICENSE.GPL
--build_system/build_files/Core/ia.mk
--build_system/build_files/OS/linux_2.6.mk
--build_system/build_files/OS/linux_2.6_kernel_space_rules.mk
--build_system/build_files/common.mk
--build_system/build_files/rules.mk
- filelist
- versionfile
---- a/versionfile
-+++ b/versionfile
-@@ -1,4 +1,4 @@
--PACKAGE_TYPE=Embedded
-+PACKAGE_TYPE=Embedded.Release.Patch
- 
- PACKAGE_OS=L
- 
-@@ -6,4 +6,6 @@ PACKAGE_VERSION_MAJOR_NUMBER=1
- 
- PACKAGE_VERSION_MINOR_NUMBER=0
- 
--PACKAGE_VERSION_PATCH_NUMBER=34
-+PACKAGE_VERSION_PATCH_NUMBER=7
-+
-+PACKAGE_VERSION_BUILD_NUMBER=5
diff --git a/package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch b/package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch
deleted file mode 100644
index f897527..0000000
--- a/package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/build_system/build_files/common.mk
-+++ b/build_system/build_files/common.mk
-@@ -122,7 +122,7 @@ CC=$(COMPILER)
- LD=$(LINKER)
- AR=$(ARCHIVER)
- 
--CFLAGS+=-O2
-+#CFLAGS+=-O2
- 
- 
- PWD= $(shell pwd)
---- a/build_system/build_files/OS/linux_2.6.mk
-+++ b/build_system/build_files/OS/linux_2.6.mk
-@@ -80,7 +80,7 @@ endif
- 
- 
- ifeq ($(OS_LEVEL), kernel_space)
--CFLAGS+= 
-+#CFLAGS+= 
- endif
- 
- 
diff --git a/package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch b/package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch
deleted file mode 100644
index 4f1c082..0000000
--- a/package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -291,7 +291,7 @@ int pci_probe(struct pci_dev *dev, const
- 
-     }
- 
--    if ( request_irq(dev->irq, &timesync_isr, SA_SHIRQ, DRIVERNAME,
-+    if ( request_irq(dev->irq, &timesync_isr, IRQF_SHARED, DRIVERNAME,
-          &g_drvr_data) )
-     {
-       printk("%s-pci_probe: irq\n", DRIVERNAME);
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -424,7 +424,7 @@ int can_open(struct inode *inode, struct
-     err = request_irq(
-         can_os->irq,
-         can_irq_handler,
--        SA_SHIRQ,
-+        IRQF_SHARED,
-         iminor(can_os->inode) ? CAN_PROC_1 : CAN_PROC_0,
-         &(g_can_os[iminor(can_os->inode)])
-         );
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -367,7 +367,7 @@ int32_t edma_resume(struct pci_dev *dev)
-         return -ENODEV;
-     }
- 
--    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
-+    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
-                         g_char_drvr_name, dev) )
-     {
- 
-@@ -829,7 +829,7 @@ int32_t edma_probe(struct pci_dev * dev,
-     /*
-     * Obtain a (shared) Interrupt Request (IRQ) Line from the OS.
-     */
--    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
-+    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
-                         g_char_drvr_name, dev) )
-     {
- 
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -1461,7 +1461,7 @@ static int __init wdt_init_one(struct pc
- 
-      /* Request irq only if wdt_irq is other than 0 */
-      if (wdt_irq) {
--        if (request_irq(wdt_irq, wdt_isr, SA_INTERRUPT | SA_SHIRQ,
-+        if (request_irq(wdt_irq, wdt_isr, IRQF_DISABLED | IRQF_SHARED,
-            "iwdt", &wdt_miscdev)) {
-            printk("IRQ %d is not free.\n", wdt_irq);
-            return -EIO;
diff --git a/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch b/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
deleted file mode 100644
index 162449c..0000000
--- a/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
- 	kfree(data);
- }
- 
-+static const struct net_device_ops iegbe_netdev_ops = {
-+	.ndo_open		= iegbe_open,
-+	.ndo_stop		= iegbe_close,
-+	.ndo_start_xmit		= iegbe_xmit_frame,
-+	.ndo_get_stats		= iegbe_get_stats,
-+	.ndo_set_rx_mode	= iegbe_set_rx_mode,
-+	.ndo_set_mac_address	= iegbe_set_mac,
-+	.ndo_tx_timeout		= iegbe_tx_timeout,
-+	.ndo_change_mtu		= iegbe_change_mtu,
-+	.ndo_do_ioctl		= iegbe_ioctl,
-+	.ndo_validate_addr	= eth_validate_addr,
-+
-+	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
-+	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
-+	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller	= iegbe_netpoll,
-+#endif
-+};
-+
- /**
-  * iegbe_probe - Device Initialization Routine
-  * @pdev: PCI device information struct
-@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
- 	if (!hw->hw_addr)
-         goto err_ioremap;
- 
--    netdev->open = &iegbe_open;
--    netdev->stop = &iegbe_close;
--    netdev->hard_start_xmit = &iegbe_xmit_frame;
--    netdev->get_stats = &iegbe_get_stats;
--	netdev->set_rx_mode = &iegbe_set_rx_mode;
--	netdev->set_mac_address = &iegbe_set_mac;
--    netdev->change_mtu = &iegbe_change_mtu;
--    netdev->do_ioctl = &iegbe_ioctl;
-+	netdev->netdev_ops = &iegbe_netdev_ops;
- 	set_ethtool_ops(netdev);
--    netdev->tx_timeout = &iegbe_tx_timeout;
- 	netdev->watchdog_timeo = 5 * HZ;
- 	netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
--    netdev->vlan_rx_register = iegbe_vlan_rx_register;
--    netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
--    netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
--#ifdef CONFIG_NET_POLL_CONTROLLER
--    netdev->poll_controller = iegbe_netpoll;
--#endif
-+
- 	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
- 
- 
diff --git a/package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch b/package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
deleted file mode 100644
index 921d464..0000000
--- a/package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -3465,12 +3465,12 @@ static irqreturn_t iegbe_intr_msi(int ir
- 	    printk("Critical error! ICR = 0x%x\n", icr);
- 	    return IRQ_HANDLED;
- 	}
--	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+	if (likely(napi_schedule_prep(&adapter->napi))) {
- 		adapter->total_tx_bytes = 0;
- 		adapter->total_tx_packets = 0;
- 		adapter->total_rx_bytes = 0;
- 		adapter->total_rx_packets = 0;
--		__netif_rx_schedule(netdev, &adapter->napi);
-+		__napi_schedule(&adapter->napi);
- 	} else
- 		iegbe_irq_enable(adapter);
- 
-@@ -3527,12 +3527,12 @@ iegbe_intr(int irq, void *data)
- 		E1000_WRITE_REG(&adapter->hw, IMC, ~0);
- 		E1000_WRITE_FLUSH(&adapter->hw);
- 	}
--	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+	if (likely(napi_schedule_prep(&adapter->napi))) {
- 		adapter->total_tx_bytes = 0;
- 		adapter->total_tx_packets = 0;
- 		adapter->total_rx_bytes = 0;
- 		adapter->total_rx_packets = 0;
--		__netif_rx_schedule(netdev, &adapter->napi);
-+		__napi_schedule(&adapter->napi);
- 	} else
- 		/* this really should not happen! if it does it is basically a
- 		 * bug, but not a hard error, so enable ints and continue */
-@@ -3574,7 +3574,7 @@ static int iegbe_clean(struct napi_struc
- 	if (work_done < budget) {
- 		if (likely(adapter->itr_setting & 3))
- 			iegbe_set_itr(adapter);
--		netif_rx_complete(poll_dev, napi);
-+		napi_complete(napi);
- 		iegbe_irq_enable(adapter);
- 	}
- 
diff --git a/package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch b/package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
deleted file mode 100644
index f7ca627..0000000
--- a/package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
+++ /dev/null
@@ -1,103 +0,0 @@
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -316,7 +316,6 @@ struct iegbe_adapter {
- 				int cleaned_count);
- 	struct iegbe_rx_ring *rx_ring;      /* One per active queue */
- 	struct napi_struct napi;
--	struct net_device *polling_netdev;  /* One per active queue */
- 
- 	int num_tx_queues;
- 	int num_rx_queues;
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
- 	struct iegbe_hw *hw;
- 
- 	static int cards_found = 0;
--    int i, err, pci_using_dac;
-+	int err, pci_using_dac;
- 	u16 eeprom_data = 0;
- 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
- 	int bars; 
-@@ -984,11 +984,8 @@ err_eeprom:
- 		iegbe_phy_hw_reset(hw);
- 	if (hw->flash_address)
- 		iounmap(hw->flash_address);
--	for (i = 0; i < adapter->num_rx_queues; i++)
--		dev_put(&adapter->polling_netdev[i]);
- 	kfree(adapter->tx_ring);
- 	kfree(adapter->rx_ring);
--	kfree(adapter->polling_netdev);
- err_sw_init:
- 	iounmap(hw->hw_addr);
- err_ioremap:
-@@ -1017,7 +1014,6 @@ iegbe_remove(struct pci_dev *pdev)
-     struct net_device *netdev = pci_get_drvdata(pdev);
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t manc;
--    int i;
- 
-     if(adapter->hw.mac_type >= iegbe_82540
-        && adapter->hw.mac_type != iegbe_icp_xxxx
-@@ -1030,15 +1026,11 @@ iegbe_remove(struct pci_dev *pdev)
-     }
- 
-     unregister_netdev(netdev);
--    for (i = 0x0; i < adapter->num_rx_queues; i++)
--		dev_put(&adapter->polling_netdev[i]);
--
-     if(!iegbe_check_phy_reset_block(&adapter->hw)) {
-         iegbe_phy_hw_reset(&adapter->hw);
-     }
-     kfree(adapter->tx_ring);
-     kfree(adapter->rx_ring);
--    kfree(adapter->polling_netdev);
- 
-     iounmap(adapter->hw.hw_addr);
-     pci_release_regions(pdev);
-@@ -1061,7 +1053,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
-     struct iegbe_hw *hw = &adapter->hw;
-     struct net_device *netdev = adapter->netdev;
-     struct pci_dev *pdev = adapter->pdev;
--    int i;
- 
-     /* PCI config space info */
- 
-@@ -1111,11 +1102,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
- 		return -ENOMEM;
- 	}
- 
--	for (i = 0; i < adapter->num_rx_queues; i++) {
--		adapter->polling_netdev[i].priv = adapter;
--		dev_hold(&adapter->polling_netdev[i]);
--		set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
--	}
- 	spin_lock_init(&adapter->tx_queue_lock);
- 
-         /*
-@@ -1137,8 +1123,7 @@ iegbe_sw_init(struct iegbe_adapter *adap
-  * @adapter: board private structure to initialize
-  *
-  * We allocate one ring per queue at run-time since we don't know the
-- * number of queues at compile-time.  The polling_netdev array is
-- * intended for Multiqueue, but should work fine with a single queue.
-+ * number of queues at compile-time.
-  **/
- 
- static int __devinit
-@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
- 		return -ENOMEM;
- 	}
- 
--	adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
--	                                  sizeof(struct net_device),
--	                                  GFP_KERNEL);
--	if (!adapter->polling_netdev) {
--		kfree(adapter->tx_ring);
--		kfree(adapter->rx_ring);
--		return -ENOMEM;
--	}
--
-     return E1000_SUCCESS;
- }
- 
diff --git a/package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch b/package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
deleted file mode 100644
index 71d2d54..0000000
--- a/package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2161,7 +2161,8 @@ static void iegbe_set_rx_mode(struct net
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
- 	struct iegbe_hw *hw = &adapter->hw;
--	struct dev_addr_list *uc_ptr;
-+	struct netdev_hw_addr *ha;
-+	bool use_uc = false;
- 	struct dev_addr_list *mc_ptr;
- 	u32 rctl;
- 	u32 hash_value;
-@@ -2187,12 +2188,11 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		}
- 	}
- 
--	uc_ptr = NULL;
- 	if (netdev->uc_count > rar_entries - 1) {
- 		rctl |= E1000_RCTL_UPE;
- 	} else if (!(netdev->flags & IFF_PROMISC)) {
- 		rctl &= ~E1000_RCTL_UPE;
--		uc_ptr = netdev->uc_list;
-+		use_uc = true;
- 	}
- 
- 	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-@@ -2210,13 +2210,20 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 	 * if there are not 14 addresses, go ahead and clear the filters
- 	 * -- with 82571 controllers only 0-13 entries are filled here
- 	 */
-+	i = 1;
-+	if (use_uc)
-+		list_for_each_entry(ha, &netdev->uc_list, list) {
-+			if (i == rar_entries)
-+				break;
-+			iegbe_rar_set(hw, ha->addr, i++);
-+		}
-+
-+	WARN_ON(i == rar_entries);
-+
- 	mc_ptr = netdev->mc_list;
- 
--	for (i = 1; i < rar_entries; i++) {
--		if (uc_ptr) {
--			iegbe_rar_set(hw, uc_ptr->da_addr, i);
--			uc_ptr = uc_ptr->next;
--		} else if (mc_ptr) {		
-+	for (; i < rar_entries; i++) {
-+		if (mc_ptr) {
- 			iegbe_rar_set(hw, mc_ptr->da_addr, i);
- 			mc_ptr = mc_ptr->next;
- 		} else {
-@@ -2226,7 +2233,6 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 			E1000_WRITE_FLUSH(&adapter->hw);
- 		}
- 	}
--	WARN_ON(uc_ptr != NULL);
- 
- 	/* clear the old settings from the multicast hash table */
- 
diff --git a/package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch b/package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
deleted file mode 100644
index c6eced6..0000000
--- a/package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2188,7 +2188,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		}
- 	}
- 
--	if (netdev->uc_count > rar_entries - 1) {
-+	if (netdev->uc.count > rar_entries - 1) {
- 		rctl |= E1000_RCTL_UPE;
- 	} else if (!(netdev->flags & IFF_PROMISC)) {
- 		rctl &= ~E1000_RCTL_UPE;
-@@ -2212,7 +2212,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 	 */
- 	i = 1;
- 	if (use_uc)
--		list_for_each_entry(ha, &netdev->uc_list, list) {
-+		list_for_each_entry(ha, &netdev->uc.list, list) {
- 			if (i == rar_entries)
- 				break;
- 			iegbe_rar_set(hw, ha->addr, i++);
diff --git a/package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch b/package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
deleted file mode 100644
index d5fc46f..0000000
--- a/package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
- 	if (err)
-         return err;
- 
--	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
--	    !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
-+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
-+	    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
- 		pci_using_dac = 1;
-         } else {
--             err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-+             err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-    	     if (err) {
--			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-+			err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- 			if (err) {
- 				E1000_ERR("No usable DMA configuration, "
- 					  "aborting\n");
diff --git a/package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch b/package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
deleted file mode 100644
index a08e8c7..0000000
--- a/package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -944,7 +944,8 @@ iegbe_intr_test(struct iegbe_adapter *ad
-     *data = 0;
- 
-     /* Hook up test interrupt handler just for this test */
--     if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
-+     if(!request_irq(irq, &iegbe_test_intr, IRQF_PROBE_SHARED, netdev->name,
-+			netdev)) {
-          shared_int = FALSE;
-      } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
-                   netdev->name, netdev)){
diff --git a/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch b/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch
deleted file mode 100644
index ae74e0c..0000000
--- a/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch
+++ /dev/null
@@ -1,747 +0,0 @@
---- a/Embedded/src/GbE/iegbe_oem_phy.c
-+++ b/Embedded/src/GbE/iegbe_oem_phy.c
-@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
- static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
- static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
- 
-+static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
-+static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
-+static int32_t oi_phy_setup (struct iegbe_hw *hw);
-+
- /**
-  * iegbe_oem_setup_link
-  * @hw: iegbe_hw struct containing device specific information
-@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-     }
- 
-     switch (hw->phy_id) {
-+	case BCM5395S_PHY_ID:
-+		return E1000_SUCCESS;
-+		break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_link_m88_setup(hw);
-@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-                 return ret_val; 
-             }
-         break; 
-+	case BCM5481_PHY_ID:
-+		ret_val = iegbe_oem_link_bcm5481_setup(hw);
-+		if(ret_val) { 
-+			return ret_val; 
-+		}
-+		break; 
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return -E1000_ERR_PHY_TYPE;
-@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
-+/**
-+ * iegbe_oem_link_bcm5481_setup
-+ * @hw: iegbe_hw struct containing device specific information
-+ *
-+ * Returns E1000_SUCCESS, negative E1000 error code on failure
-+ *
-+ * copied verbatim from iegbe_oem_link_m88_setup
-+ **/
-+static int32_t
-+iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
-+{
-+	int32_t ret_val;
-+	uint16_t phy_data;
-+
-+	//DEBUGFUNC(__func__);
-+
-+	if(!hw)
-+		return -1;
-+
-+	/* phy_reset_disable is set in iegbe_oem_set_phy_mode */
-+	if(hw->phy_reset_disable)
-+		return E1000_SUCCESS;
-+
-+	// Enable MDIX in extended control reg.
-+	ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
-+	if(ret_val)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
-+		return ret_val;
-+	}
-+
-+	phy_data &= ~BCM5481_ECTRL_DISMDIX;
-+	ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
-+	if(ret_val)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
-+		return ret_val;
-+	}
-+
-+	ret_val = oi_phy_setup (hw);
-+	if (ret_val)
-+		return ret_val;
-+
-+	return E1000_SUCCESS;
-+}
- 
- /**
-  * iegbe_oem_link_m88_setup
-@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-       switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
-+			break;
-+
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
-               ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
-      switch (hw->phy_id) {
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-              DEBUGOUT("No DSP to reset on OEM PHY\n");
-          break;
-          default:
-@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+            DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
-+        break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /*
-@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
-      * use iegbe_set_phy_mode as example
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+             DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
-+         break;
-+
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-              ret_val = iegbe_read_eeprom(hw, 
-@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
-     }
-     hw->phy_type = iegbe_phy_oem;
- 
-+{
-+	// If MAC2 (BCM5395 switch), manually detect the phy
-+	struct iegbe_adapter *adapter;
-+	uint32_t device_number;
-+	adapter = (struct iegbe_adapter *) hw->back;
-+	device_number = PCI_SLOT(adapter->pdev->devfn);
-+	if (device_number == ICP_XXXX_MAC_2) {
-+		hw->phy_id = BCM5395S_PHY_ID;
-+		hw->phy_revision = 0;
-+		return E1000_SUCCESS;
-+	}
-+}
-+
-     ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
-     if(ret_val) {
-         DEBUGOUT("Unable to read PHY register PHY_ID1\n");
-@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
-     switch (hw->phy_id) {
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-              phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
-          break;
-          default:
-@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             isCopper = TRUE;
-         break;
-         default:
-@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
- 	switch(device_number)
-     {
-       case ICP_XXXX_MAC_0: 
--	      hw->phy_addr = 0x00;
-+	      hw->phy_addr = 0x01;
- 	  break;
-       case ICP_XXXX_MAC_1: 
--	      hw->phy_addr = 0x01;
-+	      hw->phy_addr = 0x02;
- 	  break;
-       case ICP_XXXX_MAC_2: 
--	      hw->phy_addr = 0x02;
-+	      hw->phy_addr = 0x00;
- 	  break;
- 	  default:  hw->phy_addr = 0x00;
-     }
-@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
-     if(!adapter || !ifr) {
-         return -1;
-     }
-+
-+	// If MAC2 (BCM5395 switch) then leave now
-+	if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
-+			return -1;
-+	}
-+
-     switch (data->reg_num) {
-         case PHY_CTRL:
-             if(mii_reg & MII_CR_POWER_DOWN) {
-@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
-      * [10] = mdix mode
-      */
-     switch (adapter->hw.phy_id) {
-+	case BCM5395S_PHY_ID:
-+	case BCM5481_PHY_ID:
-+		DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
-+	break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             if(corrected_len > 0) {
-@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-      * Loopback configuration is the same for each of the supported PHYs.
-      */
-     switch (adapter->hw.phy_id) {
-+		case BCM5395S_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
- 
-           adapter->hw.autoneg = FALSE;
- 
-@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
-     }
- 
-     switch (adapter->hw.phy_id) {
-+		case BCM5395S_PHY_ID:
-+		DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
-+		return;
-+		break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-         default:
-             adapter->hw.autoneg = TRUE;
-         
-@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*isDowngraded = 0;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*polarity = 0;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /* return the Polarity bit in the Status register. */
-@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
-      */
-         
-       switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always full duplex */
-+			*isFD = 1;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+				switch (BCM5481_ASTAT_HCD(phy_data)) {
-+					case BCM5481_ASTAT_1KBTFD:
-+					case BCM5481_ASTAT_100BTXFD:
-+						*isFD = 1;
-+						break;
-+					default:
-+						*isFD = 0;
-+				}
-+			break;
-+
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
-              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always 1000mb */
-+			*is1000 = 1;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+				switch (BCM5481_ASTAT_HCD(phy_data)) {
-+					case BCM5481_ASTAT_1KBTFD:
-+					case BCM5481_ASTAT_1KBTHD:
-+						*is1000 = 1;
-+					break;
-+				default:
-+					*is1000 = 0;
-+				}
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
-      * see iegbe_config_mac_to_phy
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always 1000Mb, never 100mb */
-+			*is100 = 0;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+			switch (BCM5481_ASTAT_HCD(phy_data)) {
-+				case BCM5481_ASTAT_100BTXFD:
-+				case BCM5481_ASTAT_100BTXHD:
-+					*is100 = 1;
-+					break;
-+				default:
-+					*is100 = 0;
-+			}
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-      * see iegbe_phy_m88_get_info
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-   /* The downshift status is checked only once, after link is
-@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
-      * the M88 used in truxton. 
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read register PHY_CTRL\n");
-@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             DEBUGOUT("Nothing to do for OEM PHY Init");
-         break;
-         default:
-@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
-         return -1;
-     }
- 
-+	if (hw->phy_id == BCM5395S_PHY_ID) {
-+		DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
-+		return -1;
-+	}
-+
-     /* call the GCU func that will read the phy
-      * 
-      * Make note that the M88 phy is what'll be used on Truxton.
-@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
-     }
- 
-      switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
-+			break;
-+
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-          /* Gasket set correctly for Marvell Phys, so nothing to do */
-@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             ret_val = FALSE;
-         break;
-         default:
-@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             DEBUGOUT("No DSP to configure on OEM PHY");
-         break;
-         default:
-@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
-     }
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*min_length = 0;
-+			*max_length = iegbe_igp_cable_length_150;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Link always up */
-+			*isUp = TRUE;
-+			return E1000_SUCCESS;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+			ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+			if(ret_val)
-+			{
-+				DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
-+				return ret_val;
-+			}
-+			statusMask = BCM5481_ESTAT_LINK;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); 
-@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
-+
-+
-+//-----
-+// Read BCM5481 expansion register
-+//
-+int32_t
-+bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
-+{
-+	int ret;
-+	uint16_t selector;
-+	uint16_t reg_data;
-+
-+	// Get the current value of bits 15:12
-+	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
-+	if (ret)
-+		return ret;
-+
-+	// Select the expansion register
-+	selector &= 0xf000;
-+	selector |= (0xf << 8) | (reg);
-+	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+	// Read the expansion register
-+	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
-+
-+	// De-select the expansion registers.
-+	selector &= 0xf000;
-+	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+	if (ret)
-+		return ret;
-+
-+	*data = reg_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read reg 0x18 sub-register
-+//
-+static int32_t
-+bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+	int	ret;
-+	uint16_t	tmp_data;
-+
-+	// Select reg 0x18, sv
-+	tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	// Read reg 0x18, sv
-+	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	*data = tmp_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read reg 0x1C sub-register
-+//
-+int32_t
-+bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+	int ret;
-+	uint16_t tmp_data;
-+
-+	// Select reg 0x1c, sv
-+	tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	// Read reg 0x1c, sv
-+	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	*data = tmp_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read-modify-write a 0x1C register.
-+//
-+//	hw   - hardware access info.
-+//	reg  - 0x1C register to modify.
-+//	data - bits which should be set.
-+//	mask - the '1' bits in this argument will be cleared in the data
-+//         read from 'reg' then 'data' will be or'd in and the result
-+//         will be written to 'reg'.
-+
-+int32_t
-+bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
-+{
-+	int32_t		ret;
-+	uint16_t	reg_data;
-+
-+	ret = 0;
-+
-+	ret = bcm5481_read_1csv (hw, reg, &reg_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481 1CH register\n");
-+		printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
-+		return ret;
-+	}
-+
-+	reg_data &= ~mask;
-+	reg_data |= (BCM5481_R1CH_WE | data);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481 1CH register\n");
-+		printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
-+		return ret;
-+	}
-+
-+	return ret;
-+}
-+
-+int32_t
-+oi_phy_setup (struct iegbe_hw *hw)
-+{
-+	int	ret;
-+	uint16_t	pmii_data;
-+	uint16_t	mctrl_data;
-+	uint16_t	cacr_data;
-+
-+	ret = 0;
-+
-+	// Set low power mode via reg 0x18, sv010, bit 6
-+	// Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
-+	ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
-+		return ret;
-+	}
-+
-+	// Set the LPM bit in the data just read and write back to sv010
-+	// The shadow register select bits [2:0] are set by reading the sv010
-+	// register.
-+	pmii_data |= BCM5481_R18H_SV010_LPM;
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+		return ret;
-+	}
-+
-+
-+	// Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
-+
-+	if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+		return ret;
-+	}
-+	mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+		return ret;
-+	}
-+
-+	// Enable RGMII transmit clock delay in reg 0x1c, sv00011
-+	ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
-+		return ret;
-+	}
-+
-+	cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R1CH register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
-+		return ret;
-+	}
-+
-+	// Enable dual link speed indication (0x1c, sv 00010, bit 2)
-+	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
-+	if (ret)
-+		return ret;
-+
-+	// Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
-+	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
-+	if (ret)
-+		return ret;
-+
-+	return ret;
-+}
---- a/Embedded/src/GbE/iegbe_oem_phy.h
-+++ b/Embedded/src/GbE/iegbe_oem_phy.h
-@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
- 
- #define DEFAULT_ICP_XXXX_TIPG_IPGT 8      /* Inter Packet Gap Transmit Time */
- #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL 
-+#define BCM5481_PHY_ID		0x0143BCA0
-+#define BCM5395S_PHY_ID		0x0143BCF0
- 
- /* Miscellaneous defines */
- #ifdef IEGBE_10_100_ONLY
-@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
-     #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x2F
- #endif
- 
-+/* BCM5481 specifics */
-+
-+#define BCM5481_ECTRL		(0x10)
-+#define BCM5481_ESTAT		(0x11)
-+#define BCM5481_RXERR		(0x12)
-+#define BCM5481_EXPRW		(0x15)
-+#define BCM5481_EXPACC		(0x17)
-+#define BCM5481_ASTAT		(0x19)
-+#define BCM5481_R18H		(0x18)
-+#define BCM5481_R1CH		(0x1c)
-+
-+/* indirect register access via register 18h */
-+
-+#define BCM5481_R18H_SV_MASK	(7) // Mask for SV bits.
-+#define BCM5481_R18H_SV_ACTRL	(0) // SV000 Aux. control
-+#define BCM5481_R18H_SV_10BT	(1) // SV001 10Base-T
-+#define BCM5481_R18H_SV_PMII	(2) // SV010 Power/MII control
-+#define BCM5481_R18H_SV_MTEST	(4) // SV100 Misc. test
-+#define BCM5481_R18H_SV_MCTRL	(7) // SV111 Misc. control
-+
-+#define BCM5481_R18H_SV001_POL	(1 << 13) // Polarity
-+#define BCM5481_R18H_SV010_LPM	(1 << 6)
-+#define BCM5481_R18H_SV111_SKEW	(1 << 8)
-+#define BCM5481_R18H_WE		(1 << 15) // Write enable
-+
-+// 0x1c registers
-+#define BCM5481_R1CH_SV_SHIFT	(10)
-+#define BCM5481_R1CH_SV_MASK	(0x1f)
-+#define BCM5481_R1CH_SC1	(0x02) // sv00010 Spare control 1
-+#define BCM5481_R1CH_CACR	(0x03) // sv00011 Clock alignment control
-+#define BCM5481_R1CH_LCTRL	(0x09) // sv01001 LED control
-+#define BCM5481_R1CH_LEDS1	(0x0d) // sv01101 LED selector 1
-+
-+// 0x1c common
-+#define BCM5481_R1CH_WE		(1 << 15) // Write enable
-+
-+// 0x1c, sv 00010
-+#define BCM5481_R1CH_SC1_LINK	(1 << 2) // sv00010 Linkspeed
-+
-+// 0x1c, sv 00011
-+#define BCM5481_R1CH_CACR_TCD	(1 << 9) // sv00011 RGMII tx clock delay
-+
-+// 0x1c, sv 01001
-+#define BCM5481_R1CH_LCTRL_ALEN	(1 << 4) // Activity/Link enable on ACTIVITY LED
-+#define BCM5481_R1CH_LCTRL_AEN	(1 << 3) // Activity enable on ACTIVITY LED
-+
-+#define BCM5481_ECTRL_DISMDIX	(1 <<14)
-+
-+#define BCM5481_MCTRL_AUTOMDIX	(1 <<9)
-+
-+#define BCM5481_ESTAT_LINK	(1 << 8)
-+
-+#define BCM5481_ASTAT_ANC	(1 << 15)
-+#define BCM5481_ASTAT_ANHCD	(7 << 8)
-+#define BCM5481_ASTAT_HCD(x)	((x >> 8) & 7)
-+#define BCM5481_ASTAT_1KBTFD	(0x7)
-+#define BCM5481_ASTAT_1KBTHD	(0x6)
-+#define BCM5481_ASTAT_100BTXFD	(0x5)
-+#define BCM5481_ASTAT_100BTXHD	(0x3)
-+
- #endif /* ifndef _IEGBE_OEM_PHY_H_ */
-  
diff --git a/package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch b/package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
deleted file mode 100644
index 2919466..0000000
--- a/package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/Embedded/src/CAN/icp_can_user.h
-+++ b/Embedded/src/CAN/icp_can_user.h
-@@ -63,6 +63,8 @@
- #ifndef __ICP_CAN_USER_H__
- #define __ICP_CAN_USER_H__
- 
-+#include <linux/ioctl.h>
-+
- /*****************************************************************************
-  * Device IO control codes.
-  *****************************************************************************/
diff --git a/package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch b/package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
deleted file mode 100644
index a560fa6..0000000
--- a/package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -70,6 +70,8 @@
- 
- #include "can_main.h"
- #include "can_ioctl.h"
-+#include <linux/fs.h>
-+
- 
- MODULE_AUTHOR("Intel(R) Corporation");
- MODULE_DESCRIPTION("Controller Area Network Driver");
diff --git a/package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch b/package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch
deleted file mode 100644
index 381841f..0000000
--- a/package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -654,7 +654,7 @@ int can_dev_io(struct inode *inode, stru
- /*****************************************************************************
-  * Interrupt handler.
-  *****************************************************************************/
--irqreturn_t can_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
-+irqreturn_t can_irq_handler(int irq, void *dev_id)
- {
-     can_os_t *can_os = (can_os_t *) dev_id;
-     unsigned int int_status;
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -165,8 +165,7 @@ int can_dev_io(
- 
- irqreturn_t can_irq_handler(
-     int irq, 
--    void *dev_id, 
--    struct pt_regs *regs);
-+    void *dev_id);
- 
- void can_tasklet(
-     unsigned long arg
diff --git a/package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch b/package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
deleted file mode 100644
index fcbb85c..0000000
--- a/package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -214,8 +214,8 @@ int can_pci_probe(struct pci_dev *dev, c
-     spin_lock_init(&(g_can_os[can_num].int_spinlock));
-     spin_lock_init(&(g_can_os[can_num].open_spinlock));
- 
--    dev->dev.driver_data = (void *) &(g_can_os[can_num]);
--    if (!dev->dev.driver_data)
-+    dev_set_drvdata(&dev->dev, (void *) &(g_can_os[can_num]));
-+    if (!dev_get_drvdata(&dev->dev))
-     {
-         printk("Couldn't create CAN device %d. Exiting.\n",
-             dev->device);
-@@ -237,7 +237,7 @@ int can_pci_probe(struct pci_dev *dev, c
-  *****************************************************************************/
- void can_pci_remove(struct pci_dev *dev)
- {
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
- 
-     iounmap(can_os->pci_remap);
-     icp_can_destroy(can_os->can);
-@@ -251,7 +251,7 @@ int can_pci_suspend(struct pci_dev *dev,
- {
-     unsigned int i;
-     unsigned int int_status;
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
-     int err;
- 
- 	/* Indicate that we are suspending */
-@@ -322,7 +322,7 @@ int can_pci_suspend(struct pci_dev *dev,
- int can_pci_resume(struct pci_dev *dev)
- {
-     unsigned int i;
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
- 
- 	/* Restore PCI CFG space */
- 	pci_restore_state(dev);
diff --git a/package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch b/package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch
deleted file mode 100644
index 59242b8..0000000
--- a/package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -180,19 +180,19 @@ MODULE_PARM_DESC(wdt_scale, "Intel WDT s
- module_param(wdt_intr_type, byte, WDT_INT_TYPE_IRQ);
- MODULE_PARM_DESC(wdt_intr_type, "Intel WDT interrupt type (default SERIRQ).");
- 
--module_param(wdt_margin1, uint, TIMER_MARGIN);
-+module_param(wdt_margin1, uint, 0);
- MODULE_PARM_DESC(wdt_margin1, "First stage Intel WDT timeout in steps of 1 ms by default.");
- 
--module_param(wdt_margin2, uint, TIMER_MARGIN);
-+module_param(wdt_margin2, uint, 0);
- MODULE_PARM_DESC(wdt_margin2, "Second stage Intel WDT timeout in steps of 1 ms by default.");
- 
- module_param(nowayout, int, 0);
- MODULE_PARM_DESC(nowayout, "Intel WDT can't be stopped once started (default=0)");
- 
--module_param(wdt_index_port, int, 0x4E);
-+module_param(wdt_index_port, int, 0);
- MODULE_PARM_DESC(wdt_index_port, "WDT Index Port (default 0x4e)");
- 
--module_param(wdt_data_port, int, 0x4E);
-+module_param(wdt_data_port, int, 0);
- MODULE_PARM_DESC(wdt_data_port, "WDT Data Port (default 0x4f)");
- 
- static int wdt_get_iobase(struct pci_dev *dev, u16 *iobase, int *irq);
-@@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *fi
-                      size_t count, loff_t * pos);
- static int wdt_ioctl(struct inode *inode, struct file *file,
-                     unsigned int cmd, unsigned long arg);
--static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs);
-+static irqreturn_t wdt_isr(int irq, void *dev_id);
- static void __exit wdt_cleanup(void);
- static int __init wdt_init(void);
- static int __init wdt_init_one(struct pci_dev *dev,
-@@ -255,7 +255,7 @@ static struct pci_driver wdt_driver = {
-      name:        "iwdt",
-      id_table:     lpc_pci_tbl,
-      probe:        wdt_init_one,
--     remove:        __devexit(wdt_remove_one),
-+     remove:        __devexit_p(wdt_remove_one),
-      suspend:      wdt_pci_suspend,
-      resume:       wdt_pci_resume,
- };
-@@ -1393,12 +1393,12 @@ static int wdt_ioctl(struct inode *inode
- 
- /*
-  * Function Name:   wdt_isr()
-- * Parameter:    int irq - irq number, void *dev_id, struct pt_regs *regs
-+ * Parameter:    int irq - irq number, void *dev_id
-  * Return Value::   IRQ_NONE -  if the interrupt is not for wdt.
-  *           IRQ_HANDLED - if it is for wdt.
-  * Description:     This is the interrupt service routine of the WDT.
-  */
--static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs)
-+static irqreturn_t wdt_isr(int irq, void *dev_id)
- {
-      u8 val;
- 
diff --git a/package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch b/package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
deleted file mode 100644
index d858aff..0000000
--- a/package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -149,8 +149,7 @@ int32_t edma_suspend (struct pci_dev *de
- int32_t edma_resume(struct pci_dev *dev);
- int32_t initialize_edma_device(struct edma_device *device);
- 
--static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
--                                    struct pt_regs * regs);
-+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id);
- 
- /* Prototypes - Misc. */
- 
-@@ -429,8 +428,7 @@ int32_t edma_release(struct inode * inod
-  * Return Values: HANDLED = 1, NOT_HANDLED = 0
-  *****************************************************************************/
- 
--static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
--                                    struct pt_regs * regs)
-+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id)
- {
- 
-     uint32_t clear_bits;
diff --git a/package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch b/package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
deleted file mode 100644
index cfffb9c..0000000
--- a/package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -631,7 +631,7 @@ int restore_interrupts(void)
-       IRQ_NONE => this device did not interrupt
- 
- ******************************************************************************/
--irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs)
-+irqreturn_t timesync_isr(int irq, void *dev_id)
- {
-     if ( !ixTimeSyncAccEventAmmsFlagGet() && !ixTimeSyncAccEventAsmsFlagGet()&&
-        !ixTimeSyncAccEventAtmFlagGet() && !ixTimeSyncAccEventPpsmFlagGet()&&
---- a/Embedded/src/1588/1588.h
-+++ b/Embedded/src/1588/1588.h
-@@ -128,7 +128,7 @@ int pci_suspend(struct pci_dev *dev, pm_
- int pci_resume(struct pci_dev *dev);
- int pci_probe(struct pci_dev *dev, const struct pci_device_id *id);
- void pci_remove(struct pci_dev *dev);
--irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs);
-+irqreturn_t timesync_isr(int irq, void *dev_id);
- 
- // private functions
- int save_reg_state(void);
diff --git a/package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch b/package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch
deleted file mode 100644
index c11275e..0000000
--- a/package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -65,7 +65,7 @@
- 
- #include <linux/interrupt.h>
- #include <linux/pci.h>
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #include <linux/spinlock.h>
- #include <linux/cdev.h>
- #include <asm/uaccess.h>
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -87,7 +87,7 @@
- #include <linux/fcntl.h>   /* O_ACCMODE */
- #include <asm/system.h>    /* cli, *_flags */
- #include <asm/uaccess.h>   /* copy_to_user */
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #include <asm/io.h>        /* inb(), outb() */
- #include <linux/kmod.h>
- #include <linux/ioport.h>  /* request_region */
diff --git a/package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch b/package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch
deleted file mode 100644
index 8981853..0000000
--- a/package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -72,6 +72,7 @@
-  *
-  ****************************************************************************/
- 
-+#include <linux/sched.h>
- #include "1588.h"
- 
- MODULE_AUTHOR("Intel(R) Corporation");
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -68,6 +68,7 @@
-  *
-  **************************************************************************/
- 
-+#include <linux/sched.h>
- #include "can_main.h"
- #include "can_ioctl.h"
- #include <linux/fs.h>
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -137,6 +137,7 @@
- #include <linux/watchdog.h>
- #include <linux/miscdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/sched.h>
- #include "iwdt.h"
- 
- MODULE_AUTHOR("Intel(R) Corporation");
diff --git a/package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch b/package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
deleted file mode 100644
index ca8c1bb..0000000
--- a/package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -46,12 +46,6 @@ GPL LICENSE SUMMARY
- #include <linux/sched.h>
- #include <asm/io.h>
- 
--#ifndef IRQ_HANDLED
--#define irqreturn_t void
--#define IRQ_HANDLED
--#define IRQ_NONE
--#endif
--
- #ifndef SET_NETDEV_DEV
- #define SET_NETDEV_DEV(net, pdev)
- #endif
-@@ -748,6 +742,15 @@ extern void dump_stack(void);
- 
- #endif /* 2.4.24 */
- 
-+/*****************************************************************************/
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
-+#ifndef IRQ_HANDLED
-+#define irqreturn_t void
-+#define IRQ_HANDLED
-+#define IRQ_NONE
-+#endif
-+#endif /* < 2.6.30 */
-+
- #endif /* _KCOMPAT_H_ */
- 
-  
diff --git a/package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch b/package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch
deleted file mode 100644
index 63a1326..0000000
--- a/package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -3534,7 +3534,7 @@ static int iegbe_clean(struct napi_struc
- 	int tx_cleaned = 0, work_done = 0;
- 
- 	/* Must NOT use netdev_priv macro here. */
--	adapter = poll_dev->priv;
-+	adapter = netdev_priv(poll_dev);
- 
- 	/* iegbe_clean is called per-cpu.  This lock protects
- 	 * tx_ring[0] from being cleaned by multiple cpus
diff --git a/package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch b/package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch
deleted file mode 100644
index 793d08d..0000000
--- a/package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/Embedded/src/GbE/Makefile
-+++ b/Embedded/src/GbE/Makefile
-@@ -60,19 +60,19 @@ GBE_NAME = iegbe
- GCU_NAME = gcu
- 
- VERSION_FILE := $(KSRC)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KSRC)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KSRC)/include/generated/autoconf.h
- 
- ifeq (,$(wildcard $(VERSION_FILE)))
-   $(error Linux kernel source not configured - missing version.h)
- endif
- 
- ifeq (,$(wildcard $(CONFIG_FILE)))
--  $(error Linux kernel source not configured - missing autoconf.h)
-+    $(error Linux kernel source not configured - missing autoconf.h)
- endif
- 
- ifeq (,$(wildcard $(UTS_REL_FILE)))
--  $(error Linux kernel source not configured - missing utsrelease.h)
-+    $(error Linux kernel source not configured - missing utsrelease.h)
- endif
- 
- # set the install path
---- a/Embedded/src/1588/Makefile
-+++ b/Embedded/src/1588/Makefile
-@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/CAN/Makefile
-+++ b/Embedded/src/CAN/Makefile
-@@ -100,8 +100,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/EDMA/Makefile
-+++ b/Embedded/src/EDMA/Makefile
-@@ -114,8 +114,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/GPIO/Makefile
-+++ b/Embedded/src/GPIO/Makefile
-@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/WDT/Makefile
-+++ b/Embedded/src/WDT/Makefile
-@@ -99,8 +99,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
diff --git a/package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch b/package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch
deleted file mode 100644
index 7b2df63..0000000
--- a/package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch
+++ /dev/null
@@ -1,392 +0,0 @@
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -590,6 +590,10 @@ static inline void _kc_synchronize_irq()
- #define ETHTOOL_OPS_COMPAT
- #endif
- 
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
-+#define HAVE_NETIF_MSG 1
-+#endif
-+
- #ifndef HAVE_NETIF_MSG
- #define HAVE_NETIF_MSG 1
- enum {
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -159,9 +159,9 @@ static void iegbe_smartspeed(struct iegb
- static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
-                           struct sk_buff *skb);
- 
--static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
--static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
--static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
-+static bool iegbe_vlan_used(struct iegbe_adapter *adapter);
-+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
- 
- static int iegbe_notify_reboot(struct notifier_block *,
-@@ -324,8 +324,8 @@ static void iegbe_update_mng_vlan(struct
-         struct net_device *netdev = adapter->netdev;
- 	u16 vid = hw->mng_cookie.vlan_id;
-         u16 old_vid = adapter->mng_vlan_id;
--        if (adapter->vlgrp) {
--                if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-+        if (iegbe_vlan_used(adapter)) {
-+                if (!test_bit(old_vid, adapter->active_vlans)) {
- 			if (hw->mng_cookie.status &
-                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
-                                 iegbe_vlan_rx_add_vid(netdev, vid);
-@@ -335,7 +335,7 @@ static void iegbe_update_mng_vlan(struct
- 
-                         if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
-                                         (vid != old_vid) &&
--                            !vlan_group_get_device(adapter->vlgrp, old_vid))
-+                            !test_bit(old_vid, adapter->active_vlans))
-                                 iegbe_vlan_rx_kill_vid(netdev, old_vid);
-                 } else
-                         adapter->mng_vlan_id = vid;
-@@ -736,7 +736,6 @@ static const struct net_device_ops iegbe
- 	.ndo_do_ioctl		= iegbe_ioctl,
- 	.ndo_validate_addr	= eth_validate_addr,
- 
--	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
- 	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
- 	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
- #ifdef CONFIG_NET_POLL_CONTROLLER
-@@ -767,7 +766,6 @@ static int __devinit iegbe_probe(struct
- 	u16 eeprom_data = 0;
- 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
- 	int bars; 
--	DECLARE_MAC_BUF(mac);
- 
- 	bars = pci_select_bars(pdev, IORESOURCE_MEM);
- 	err = pci_enable_device(pdev);
-@@ -1247,8 +1245,7 @@ static int iegbe_close(struct net_device
- 
- 	if ((hw->mng_cookie.status &
- 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
--	     !(adapter->vlgrp &&
--	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
-+	     !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
- 		iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- 	}
- 	return 0;
-@@ -2163,11 +2160,13 @@ static void iegbe_set_rx_mode(struct net
- 	struct iegbe_hw *hw = &adapter->hw;
- 	struct netdev_hw_addr *ha;
- 	bool use_uc = false;
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- 	struct dev_addr_list *mc_ptr;
--	u32 rctl;
- 	u32 hash_value;
--	int i, rar_entries = E1000_RAR_ENTRIES;
- int mta_reg_count = E1000_NUM_MTA_REGISTERS;
-+#endif
-+	u32 rctl;
-+	int i, rar_entries = E1000_RAR_ENTRIES;
- 
- 	/* reserve RAR[14] for LAA over-write work-around */
- 	if (hw->mac_type == iegbe_82571)
-@@ -2220,6 +2219,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 
- 	WARN_ON(i == rar_entries);
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- 	mc_ptr = netdev->mc_list;
- 
- 	for (; i < rar_entries; i++) {
-@@ -2247,6 +2247,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
- 		iegbe_mta_set(hw, hash_value);
- 	}
-+#endif
- 
- 	if (hw->mac_type == iegbe_82542_rev2_0)
- 		iegbe_leave_82542_rst(adapter);
-@@ -2821,14 +2822,14 @@ static int iegbe_tx_map(struct iegbe_ada
-              * Avoid terminating buffers within evenly-aligned
-              * dwords. */
-             if(unlikely(adapter->pcix_82544 &&
--			   !((unsigned long)(frag->page+offset+size-1) & 4) &&
-+			   !((unsigned long)(frag->page.p+offset+size-1) & 4) &&
- 			   size > 4))
- 				size -= 4;
- 
-             buffer_info->length = size;
-             buffer_info->dma =
-                 pci_map_page(adapter->pdev,
--                    frag->page,
-+                    frag->page.p,
-                     offset,
-                     size,
-                     PCI_DMA_TODEVICE);
-@@ -3131,7 +3132,7 @@ static int iegbe_xmit_frame(struct sk_bu
- 		}
- 	}
- 
--	if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
-+	if (unlikely(iegbe_vlan_used(adapter) && vlan_tx_tag_present(skb))) {
- 		tx_flags |= E1000_TX_FLAGS_VLAN;
- 		tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- 	}
-@@ -3832,10 +3833,12 @@ static bool iegbe_clean_rx_irq(struct ie
- 
- 		skb->protocol = eth_type_trans(skb, netdev);
- 
--		if (unlikely(adapter->vlgrp &&
-+		if (unlikely(iegbe_vlan_used(adapter) &&
- 			    (status & E1000_RXD_STAT_VP))) {
--			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--						 le16_to_cpu(rx_desc->special));
-+			u16 vid;
-+
-+			vid = le16_to_cpu(rx_desc->special);
-+			__vlan_hwaccel_put_tag(skb, vid);
- 		} else {
- 			netif_receive_skb(skb);
- 		}
-@@ -3986,9 +3989,10 @@ copydone:
- 			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
-             adapter->rx_hdr_split++;
- 
--        if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
--            vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--				le16_to_cpu(rx_desc->wb.middle.vlan));
-+        if(unlikely(iegbe_vlan_used(adapter) && (staterr & E1000_RXD_STAT_VP))) {
-+	    u16 vid;
-+	    vid = le16_to_cpu(rx_desc->wb.middle.vlan);
-+	    __vlan_hwaccel_put_tag(skb, vid);
-         } else {
-             netif_receive_skb(skb);
-         }
-@@ -4496,17 +4500,25 @@ iegbe_io_write(struct iegbe_hw *hw, unsi
-     outl(value, port);
- }
- 
--static void iegbe_vlan_rx_register(struct net_device *netdev,
--				   struct vlan_group *grp)
-+static bool iegbe_vlan_used(struct iegbe_adapter *adapter)
-+{
-+	u16 vid;
-+
-+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
-+		return true;
-+
-+	return false;
-+}
-+
-+static void iegbe_vlan_mode(struct net_device *netdev, bool vlan_on)
- {
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t ctrl, rctl;
- 
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
-     iegbe_irq_disable(adapter);
--    adapter->vlgrp = grp;
- 
--    if(grp) {
-+    if(vlan_on) {
-         /* enable VLAN tag insert/strip */
-         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-         ctrl |= E1000_CTRL_VME;
-@@ -4538,30 +4550,37 @@ static void iegbe_vlan_rx_register(struc
-     iegbe_irq_enable(adapter);
- }
- 
--static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
- {
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t vfta, index;
-     if((adapter->hw.mng_cookie.status &
-         E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-         (vid == adapter->mng_vlan_id)) {
--        return;
-+        return 0;
-     }
-+
-+    if (!iegbe_vlan_used(adapter))
-+	iegbe_vlan_mode(netdev, true);
-+
-     /* add VID to filter table */
-     index = (vid >> 0x5) & 0x7F;
-     vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-     vfta |= (0x1 << (vid & 0x1F));
-     iegbe_write_vfta(&adapter->hw, index, vfta);
-+
-+    set_bit(vid, adapter->active_vlans);
-+
-+    return 0;
- }
- 
--static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
- 	u32 vfta, index;
- 
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_disable(adapter);
--	vlan_group_set_device(adapter->vlgrp, vid, NULL);
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_enable(adapter);
- 
-@@ -4570,21 +4589,26 @@ static void iegbe_vlan_rx_kill_vid(struc
- 	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- 	vfta &= ~(0x1 << (vid & 0x1F));
- 	iegbe_write_vfta(&adapter->hw, index, vfta);
-+
-+	clear_bit(vid, adapter->active_vlans);
-+
-+	if (!iegbe_vlan_used(adapter))
-+		iegbe_vlan_mode(netdev, false);
-+
-+	return 0;
- }
- 
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
- {
--	iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
--
--	if (adapter->vlgrp) {
- 		u16 vid;
--		for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
--			if (!vlan_group_get_device(adapter->vlgrp, vid))
--				continue;
-+
-+	if (!iegbe_vlan_used(adapter))
-+		return;
-+
-+	iegbe_vlan_mode(adapter->netdev, true);
-+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- 			iegbe_vlan_rx_add_vid(adapter->netdev, vid);
- 		}
--	}
--}
- 
- 
- int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
-@@ -4864,10 +4888,11 @@ iegbe_resume(struct pci_dev *pdev)
-     default:
-         break;
-     }
--#endif
- 
-     return 0x0;
- }
-+#endif
-+
- 
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -327,6 +327,7 @@ iegbe_set_pauseparam(struct net_device *
-     return 0;
- }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static uint32_t
- iegbe_get_rx_csum(struct net_device *netdev)
- {
-@@ -392,6 +393,7 @@ iegbe_set_tso(struct net_device *netdev,
-     return 0;
- } 
- #endif /* NETIF_F_TSO */
-+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
- 
- static uint32_t
- iegbe_get_msglevel(struct net_device *netdev)
-@@ -807,6 +809,7 @@ err_setup_rx:
-             E1000_82542_##R : E1000_##R;                           \
-         return 1;         }  }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static int
- iegbe_reg_test(struct iegbe_adapter *adapter, uint64_t *data)
- {
-@@ -1710,6 +1713,7 @@ iegbe_diag_test(struct net_device *netde
-     }
-     msleep_interruptible(0xfa0);
- }
-+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
- 
- static void
- iegbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-@@ -1812,6 +1816,7 @@ iegbe_set_wol(struct net_device *netdev,
- /* bit defines for adapter->led_status */
- #define E1000_LED_ON        0
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static void
- iegbe_led_blink_callback(unsigned long data)
- {
-@@ -1864,6 +1869,7 @@ iegbe_phys_id(struct net_device *netdev,
- 
-     return 0;
- }
-+#endif
- 
- static int
- iegbe_nway_reset(struct net_device *netdev)
-@@ -1876,11 +1882,13 @@ iegbe_nway_reset(struct net_device *netd
-     return 0;
- }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static int 
- iegbe_get_stats_count(struct net_device *netdev)
- {
-     return E1000_STATS_LEN;
- }
-+#endif
- 
- static void 
- iegbe_get_ethtool_stats(struct net_device *netdev, 
-@@ -1936,6 +1944,8 @@ struct ethtool_ops iegbe_ethtool_ops = {
-     .set_ringparam          = iegbe_set_ringparam,
-     .get_pauseparam        = iegbe_get_pauseparam,
-     .set_pauseparam        = iegbe_set_pauseparam,
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
-     .get_rx_csum        = iegbe_get_rx_csum,
-     .set_rx_csum        = iegbe_set_rx_csum,
-     .get_tx_csum            = iegbe_get_tx_csum,
-@@ -1946,11 +1956,13 @@ struct ethtool_ops iegbe_ethtool_ops = {
-     .get_tso        = ethtool_op_get_tso,
-     .set_tso        = iegbe_set_tso,
- #endif
-+
-     .self_test_count        = iegbe_diag_test_count,
-     .self_test              = iegbe_diag_test,
--    .get_strings            = iegbe_get_strings,
-     .phys_id                = iegbe_phys_id,
-     .get_stats_count        = iegbe_get_stats_count,
-+#endif
-+    .get_strings            = iegbe_get_strings,
-     .get_ethtool_stats      = iegbe_get_ethtool_stats,
- };
- 
---- a/Embedded/src/GbE/gcu_main.c
-+++ b/Embedded/src/GbE/gcu_main.c
-@@ -93,7 +93,7 @@ static struct pci_driver gcu_driver = {
- };
- 
- static struct gcu_adapter *global_adapter = 0;
--static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(global_adapter_spinlock);
- static unsigned long g_intflags = 0;
- 
- MODULE_AUTHOR("Intel(R) Corporation");
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -257,7 +257,7 @@ struct iegbe_adapter {
- 	struct timer_list tx_fifo_stall_timer;
- 	struct timer_list watchdog_timer;
- 	struct timer_list phy_info_timer;
--	struct vlan_group *vlgrp;
-+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
-     	uint16_t mng_vlan_id;
- 	uint32_t bd_number;
- 	uint32_t rx_buffer_len;
diff --git a/package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch b/package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch
deleted file mode 100644
index 06a09e5..0000000
--- a/package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -72,6 +72,7 @@
- #include "can_main.h"
- #include "can_ioctl.h"
- #include <linux/fs.h>
-+#include <linux/module.h>
- 
- 
- MODULE_AUTHOR("Intel(R) Corporation");
-@@ -110,7 +111,7 @@ struct file_operations file_ops = {
-     .owner        = THIS_MODULE,
-     .read        = can_read,
-     .write        = can_write,
--    .ioctl        = can_dev_io,
-+    .unlocked_ioctl = can_dev_io,
-     .open        = can_open,
-     .release     = can_release
- };
-@@ -594,8 +595,7 @@ int icp_can_reset(can_os_t *can_os)
- /*****************************************************************************
-  * Device IO control function. Used by user apps to configure CAN device.
-  *****************************************************************************/
--int can_dev_io(struct inode *inode, struct file *filp, unsigned int cmd,
--      unsigned long arg)
-+long can_dev_io(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     can_os_t *can_os;
-     unsigned int err=0;
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -157,8 +157,7 @@ ssize_t can_write(
- int icp_can_reset(
-     can_os_t *can_os);
-     
--int can_dev_io(
--    struct inode *inode, 
-+long can_dev_io(
-     struct file *filp, 
-     unsigned int cmd, 
-     unsigned long arg);
diff --git a/package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch b/package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch
deleted file mode 100644
index 47fb920..0000000
--- a/package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/Embedded/src/GPIO/gpio.h
-+++ b/Embedded/src/GPIO/gpio.h
-@@ -121,8 +121,7 @@ int gpio_init(void);
- void gpio_close(void);
- int gpio_open(struct inode *inode, struct file *filp);
- int gpio_release(struct inode *inode, struct file *filp);
--int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, 
--			   unsigned long arg);
-+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
- 
- // private driver functions
- int gpio_getpininfo(int Signal, char *pBuff);
-@@ -134,7 +133,7 @@ struct file_operations file_ops =
- 	.owner	=	THIS_MODULE,
- 	.open   =    gpio_open,
- 	.release =   gpio_release,	
--	.ioctl	=	gpio_ioctl,
-+	.unlocked_ioctl	= gpio_ioctl,
- };
- 
- #endif
---- a/Embedded/src/GPIO/gpio_ref.c
-+++ b/Embedded/src/GPIO/gpio_ref.c
-@@ -251,8 +251,7 @@ int gpio_release(struct inode *inode, st
-       0 => success
-     < 0 => error
- ******************************************************************************/
--int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--                unsigned long arg)
-+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     gpio_ioctl_t Info;
-     u_int bitstr = 0;
diff --git a/package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch b/package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch
deleted file mode 100644
index 60cc4ae..0000000
--- a/package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -217,8 +217,7 @@ static int wdt_open(struct inode *inode,
- static int wdt_release(struct inode *inode, struct file *file);
- static ssize_t wdt_write(struct file *file, const char *data,
-                      size_t count, loff_t * pos);
--static int wdt_ioctl(struct inode *inode, struct file *file,
--                    unsigned int cmd, unsigned long arg);
-+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
- static irqreturn_t wdt_isr(int irq, void *dev_id);
- static void __exit wdt_cleanup(void);
- static int __init wdt_init(void);
-@@ -243,7 +242,7 @@ static struct pci_device_id lpc_pci_tbl[
- static struct file_operations wdt_fops = {
-      owner:        THIS_MODULE,
-      write:        wdt_write,
--     ioctl:        wdt_ioctl,
-+     unlocked_ioctl: wdt_ioctl,
-      open:         wdt_open,
-      release:      wdt_release,
- };
-@@ -1201,8 +1200,7 @@ char *wdt_get_ioctl_string(unsigned int
-  * Return Value:    0 - successful, negative value - failed.
-  * Description:     This function is used to provide IO interface.
-  */
--static int wdt_ioctl(struct inode *inode, struct file *file,
--                    unsigned int cmd, unsigned long arg)
-+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
- {
-      u8  mode=0, scale=0, int_type=0;
-      u32 u_margin=0, dcount=0;
diff --git a/package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch b/package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch
deleted file mode 100644
index efa19d9..0000000
--- a/package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -664,8 +664,7 @@ irqreturn_t timesync_isr(int irq, void *
-       0 => success
-     < 0 => error
- ******************************************************************************/
--int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--                unsigned long arg)
-+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     wait_queue_head_t *event = NULL;
-     unsigned int bytes_ret = 0;
---- a/Embedded/src/1588/1588.h
-+++ b/Embedded/src/1588/1588.h
-@@ -121,8 +121,7 @@ MODULE_DEVICE_TABLE(pci, pci_ids);
- // Linux functions
- int timesync_open(struct inode *inode, struct file *filp);
- int timesync_release(struct inode *inode, struct file *filp);
--int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--				unsigned long arg);
-+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
- void timesync_close(void);
- int pci_suspend(struct pci_dev *dev, pm_message_t state);
- int pci_resume(struct pci_dev *dev);
-@@ -142,7 +141,7 @@ struct file_operations file_ops =
- 	.owner		= THIS_MODULE,
- 	.open     = timesync_open,
- 	.release    = timesync_release,	
--	.ioctl		= timesync_ioctl,
-+	.unlocked_ioctl = timesync_ioctl,
- };
- 
- // Linux pci operations



More information about the lede-commits mailing list