[source] ipq806x: remove scm firmware clocks
LEDE Commits
lede-commits at lists.infradead.org
Mon Mar 20 00:34:56 PDT 2017
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/0d89650db13d02afa75cd4e5429670a647dc0ced
commit 0d89650db13d02afa75cd4e5429670a647dc0ced
Author: Pavel Kubelun <be.dissent at gmail.com>
AuthorDate: Sun Mar 19 04:24:45 2017 +0300
ipq806x: remove scm firmware clocks
At the moment as a workaround definition for scm firmware in DT is used as if it is
apq8064 board. This leads to incomplete scm firmware initialization and as a result
cpuidle driver fails to configure.
By design unlike other qcom boards ipq do not use clocks to connect to scm.
Considering this we're removing from DT and scm driver clocks for ipq boards.
As a result cpuidle does not produce errors about failed configuration anymore.
Signed-off-by: Pavel Kubelun <be.dissent at gmail.com>
---
.../files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi | 5 +-
...need-clock-to-be-enabled-disabled-for-ipq.patch | 166 +++++++++++++++++++++
2 files changed, 167 insertions(+), 4 deletions(-)
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4fc9f9f..3893f45 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -206,10 +206,7 @@
firmware {
scm {
- compatible = "qcom,scm-apq8064";
-
- clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
- clock-names = "core";
+ compatible = "qcom,scm-ipq806x";
};
};
diff --git a/target/linux/ipq806x/patches-4.9/0072-ipq-scm-TZ-don-t-need-clock-to-be-enabled-disabled-for-ipq.patch b/target/linux/ipq806x/patches-4.9/0072-ipq-scm-TZ-don-t-need-clock-to-be-enabled-disabled-for-ipq.patch
new file mode 100644
index 0000000..4f0e544
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0072-ipq-scm-TZ-don-t-need-clock-to-be-enabled-disabled-for-ipq.patch
@@ -0,0 +1,166 @@
+From 0fb08a02baf5114fd3bdbc5aa92d6a6cd6d5ef3f Mon Sep 17 00:00:00 2001
+From: Manoharan Vijaya Raghavan <mraghava at codeaurora.org>
+Date: Tue, 24 Jan 2017 20:58:46 +0530
+Subject: ipq: scm: TZ don't need clock to be enabled/disabled for ipq
+
+When SCM was made as a platform driver, clock management was
+addedfor firmware calls. This is not required for IPQ.
+
+Change-Id: I3d29fafe0266e51f708f2718bab03907078b0f4d
+Signed-off-by: Manoharan Vijaya Raghavan <mraghava at codeaurora.org>
+---
+ drivers/firmware/qcom_scm.c | 87 +++++++++++++++++++++++++++++----------------
+ 1 file changed, 57 insertions(+), 30 deletions(-)
+
+(limited to 'drivers/firmware/qcom_scm.c')
+
+--- a/drivers/firmware/qcom_scm.c
++++ b/drivers/firmware/qcom_scm.c
+@@ -28,12 +28,15 @@
+
+ #include "qcom_scm.h"
+
++#define SCM_NOCLK 1
++
+ struct qcom_scm {
+ struct device *dev;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *bus_clk;
+ struct reset_controller_dev reset;
++ int is_clkdisabled;
+ };
+
+ static struct qcom_scm *__scm;
+@@ -42,6 +45,9 @@ static int qcom_scm_clk_enable(void)
+ {
+ int ret;
+
++ if (__scm->is_clkdisabled)
++ return 0;
++
+ ret = clk_prepare_enable(__scm->core_clk);
+ if (ret)
+ goto bail;
+@@ -66,6 +72,9 @@ bail:
+
+ static void qcom_scm_clk_disable(void)
+ {
++ if (__scm->is_clkdisabled)
++ return;
++
+ clk_disable_unprepare(__scm->core_clk);
+ clk_disable_unprepare(__scm->iface_clk);
+ clk_disable_unprepare(__scm->bus_clk);
+@@ -320,37 +329,61 @@ bool qcom_scm_is_available(void)
+ }
+ EXPORT_SYMBOL(qcom_scm_is_available);
+
++static const struct of_device_id qcom_scm_dt_match[] = {
++ { .compatible = "qcom,scm-apq8064",},
++ { .compatible = "qcom,scm-msm8660",},
++ { .compatible = "qcom,scm-msm8960",},
++ { .compatible = "qcom,scm-ipq807x", .data = (void *)SCM_NOCLK },
++ { .compatible = "qcom,scm-ipq806x", .data = (void *)SCM_NOCLK },
++ { .compatible = "qcom,scm-ipq40xx", .data = (void *)SCM_NOCLK },
++ { .compatible = "qcom,scm-msm8960",},
++ { .compatible = "qcom,scm-msm8960",},
++ { .compatible = "qcom,scm",},
++ {}
++};
++
+ static int qcom_scm_probe(struct platform_device *pdev)
+ {
+ struct qcom_scm *scm;
++ const struct of_device_id *id;
+ int ret;
+
+ scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
+ if (!scm)
+ return -ENOMEM;
+
+- scm->core_clk = devm_clk_get(&pdev->dev, "core");
+- if (IS_ERR(scm->core_clk)) {
+- if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+- return PTR_ERR(scm->core_clk);
++ id = of_match_device(qcom_scm_dt_match, &pdev->dev);
++ if (id)
++ scm->is_clkdisabled = (unsigned int)id->data;
++ else
++ scm->is_clkdisabled = 0;
++
++ if (!(scm->is_clkdisabled)) {
++
++ scm->core_clk = devm_clk_get(&pdev->dev, "core");
++ if (IS_ERR(scm->core_clk)) {
++ if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
++ return PTR_ERR(scm->core_clk);
+
+- scm->core_clk = NULL;
+- }
+-
+- if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
+- scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+- if (IS_ERR(scm->iface_clk)) {
+- if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
+- dev_err(&pdev->dev, "failed to acquire iface clk\n");
+- return PTR_ERR(scm->iface_clk);
++ scm->core_clk = NULL;
+ }
+
+- scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+- if (IS_ERR(scm->bus_clk)) {
+- if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
+- dev_err(&pdev->dev, "failed to acquire bus clk\n");
+- return PTR_ERR(scm->bus_clk);
++ if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
++ scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
++ if (IS_ERR(scm->iface_clk)) {
++ if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
++ dev_err(&pdev->dev, "failed to acquire iface clk\n");
++ return PTR_ERR(scm->iface_clk);
++ }
++
++ scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
++ if (IS_ERR(scm->bus_clk)) {
++ if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
++ dev_err(&pdev->dev, "failed to acquire bus clk\n");
++ return PTR_ERR(scm->bus_clk);
++ }
+ }
++
+ }
+
+ scm->reset.ops = &qcom_scm_pas_reset_ops;
+@@ -358,10 +391,12 @@ static int qcom_scm_probe(struct platfor
+ scm->reset.of_node = pdev->dev.of_node;
+ reset_controller_register(&scm->reset);
+
+- /* vote for max clk rate for highest performance */
+- ret = clk_set_rate(scm->core_clk, INT_MAX);
+- if (ret)
+- return ret;
++ if (!(scm->is_clkdisabled)) {
++ /* vote for max clk rate for highest performance */
++ ret = clk_set_rate(scm->core_clk, INT_MAX);
++ if (ret)
++ return ret;
++ }
+
+ __scm = scm;
+ __scm->dev = &pdev->dev;
+@@ -371,14 +406,6 @@ static int qcom_scm_probe(struct platfor
+ return 0;
+ }
+
+-static const struct of_device_id qcom_scm_dt_match[] = {
+- { .compatible = "qcom,scm-apq8064",},
+- { .compatible = "qcom,scm-msm8660",},
+- { .compatible = "qcom,scm-msm8960",},
+- { .compatible = "qcom,scm",},
+- {}
+-};
+-
+ static struct platform_driver qcom_scm_driver = {
+ .driver = {
+ .name = "qcom_scm",
More information about the lede-commits
mailing list