[source] rt2x00: mt7620: make fixes requested upstream
LEDE Commits
lede-commits at lists.infradead.org
Sat Mar 11 11:51:10 PST 2017
dangole pushed a commit to source.git, branch master:
https://git.lede-project.org/562484f25c535ef01a004d11b23243a36bcc50c9
commit 562484f25c535ef01a004d11b23243a36bcc50c9
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sat Mar 11 14:10:16 2017 +0100
rt2x00: mt7620: make fixes requested upstream
Introduce RT6352 instead of matching against RF7620.
Clean up channel setting rfvals.
Port bandwidth filter calibration.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
.../621-rt2x00-add-support-for-mt7620.patch | 844 ++++++++++++++++-----
1 file changed, 674 insertions(+), 170 deletions(-)
diff --git a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch
index c2ecf0c..b7a0ad1 100644
--- a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch
+++ b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch
@@ -1,13 +1,28 @@
-From: Roman Yeryomin <roman at advem.lv>
+From 5a53fd87e4691343fdb60be147ee859975071df6 Mon Sep 17 00:00:00 2001
+In-Reply-To: <20170311103750.GA17556 at redhat.com>
+References: <20170311103750.GA17556 at redhat.com>
+From: Daniel Golle <daniel at makrotopia.org>
Date: Tue, 1 Jul 2014 10:26:18 +0000
-Subject: [PATCH] mac80211: rt2x00: add support for mt7620
+Subject: [PATCH] mac80211: rt2x00: add support for MT7620
+To: Stanislaw Gruszka <sgruszka at redhat.com>
+Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
+ linux-wireless at vger.kernel.org,
+ Kalle Valo <kvalo at codeaurora.org>
+
+From: Roman Yeryomin <roman at advem.lv>
-Support for MT7620 was added to OpenWrt in r41441 and heavily reworked
+Basic support for MT7620 built-in wireless radio was added to
+OpenWrt in r41441. It has seen some heavy cleaning and refactoring
since in order to match the Kernel's code quality standards.
Signed-off-by: Roman Yeryomin <roman at advem.lv>
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 177 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1421 +++++++++++++++++++++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 4 +
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
+ 4 files changed, 1577 insertions(+), 26 deletions(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -19,7 +34,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* Chipset revisions.
-@@ -641,6 +642,14 @@
+@@ -641,6 +642,24 @@
#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
/*
@@ -30,11 +45,21 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+#define RF_CSR_CFG_WRITE_MT7620 FIELD32(0x00000010)
+#define RF_CSR_CFG_BUSY_MT7620 FIELD32(0x00000001)
+
++/* undocumented registers for calibration of new MAC */
++#define RF_CONTROL0 0x0518
++#define RF_BYPASS0 0x051c
++#define RF_CONTROL1 0x0520
++#define RF_BYPASS1 0x0524
++#define RF_CONTROL2 0x0528
++#define RF_BYPASS2 0x052c
++#define RF_CONTROL3 0x0530
++#define RF_BYPASS3 0x0534
++
+/*
* EFUSE_CSR: RT30x0 EEPROM
*/
#define EFUSE_CTRL 0x0580
-@@ -1024,6 +1033,16 @@
+@@ -1024,6 +1043,16 @@
#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
/*
@@ -51,7 +76,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
* EDCA_AC0_CFG:
*/
#define EDCA_AC0_CFG 0x1300
-@@ -1097,6 +1116,12 @@
+@@ -1097,6 +1126,12 @@
#define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000)
@@ -64,7 +89,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* TX_PWR_CFG_1:
-@@ -1119,6 +1144,11 @@
+@@ -1119,6 +1154,11 @@
#define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000)
@@ -76,7 +101,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* TX_PWR_CFG_2:
-@@ -1141,6 +1171,11 @@
+@@ -1141,6 +1181,11 @@
#define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000)
@@ -88,7 +113,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* TX_PWR_CFG_3:
-@@ -1163,6 +1198,11 @@
+@@ -1163,6 +1208,11 @@
#define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000)
@@ -100,18 +125,17 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* TX_PWR_CFG_4:
-@@ -1177,6 +1217,10 @@
+@@ -1177,6 +1227,9 @@
#define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000)
+/* bits for new 2T devices */
+#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff)
+#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00)
-+
/*
* TX_PIN_CFG:
-@@ -1203,6 +1247,8 @@
+@@ -1203,6 +1256,8 @@
#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
@@ -120,7 +144,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
#define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000)
#define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000)
#define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000)
-@@ -1549,6 +1595,95 @@
+@@ -1549,6 +1604,95 @@
#define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00)
@@ -216,7 +240,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/* TX_PWR_CFG_7 */
#define TX_PWR_CFG_7 0x13d4
#define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f)
-@@ -1557,6 +1692,10 @@
+@@ -1557,6 +1701,10 @@
#define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000)
@@ -227,7 +251,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/* TX_PWR_CFG_8 */
#define TX_PWR_CFG_8 0x13d8
-@@ -1566,12 +1705,17 @@
+@@ -1566,12 +1714,17 @@
#define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000)
@@ -245,7 +269,23 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* TX_TXBF_CFG:
-@@ -2175,6 +2319,12 @@ struct mac_iveiv_entry {
+@@ -2151,12 +2304,15 @@ struct mac_iveiv_entry {
+ #define RFCSR1_TX1_PD FIELD8(0x20)
+ #define RFCSR1_RX2_PD FIELD8(0x40)
+ #define RFCSR1_TX2_PD FIELD8(0x80)
++#define RFCSR1_TX2_EN_MT7620 FIELD8(0x02)
+
+ /*
+ * RFCSR 2:
+ */
+ #define RFCSR2_RESCAL_BP FIELD8(0x40)
+ #define RFCSR2_RESCAL_EN FIELD8(0x80)
++#define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
++#define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
+
+ /*
+ * RFCSR 3:
+@@ -2175,6 +2331,12 @@ struct mac_iveiv_entry {
#define RFCSR3_BIT5 FIELD8(0x20)
/*
@@ -258,7 +298,68 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
* FRCSR 5:
*/
#define RFCSR5_R1 FIELD8(0x0c)
-@@ -2450,6 +2600,7 @@ enum rt2800_eeprom_word {
+@@ -2229,6 +2391,7 @@ struct mac_iveiv_entry {
+ */
+ #define RFCSR13_TX_POWER FIELD8(0x1f)
+ #define RFCSR13_DR0 FIELD8(0xe0)
++#define RFCSR13_RDIV_MT7620 FIELD8(0x03)
+
+ /*
+ * RFCSR 15:
+@@ -2239,6 +2402,8 @@ struct mac_iveiv_entry {
+ * RFCSR 16:
+ */
+ #define RFCSR16_TXMIXER_GAIN FIELD8(0x07)
++#define RFCSR16_RF_PLL_FREQ_SEL_MT7620 FIELD8(0x0F)
++#define RFCSR16_SDM_MODE_MT7620 FIELD8(0xE0)
+
+ /*
+ * RFCSR 17:
+@@ -2251,6 +2416,8 @@ struct mac_iveiv_entry {
+ /* RFCSR 18 */
+ #define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40)
+
++/* RFCSR 19 */
++#define RFCSR19_K FIELD8(0x03)
+
+ /*
+ * RFCSR 20:
+@@ -2261,11 +2428,14 @@ struct mac_iveiv_entry {
+ * RFCSR 21:
+ */
+ #define RFCSR21_RX_LO2_EN FIELD8(0x08)
++#define RFCSR21_BIT1 FIELD8(0x01)
++#define RFCSR21_BIT8 FIELD8(0x80)
+
+ /*
+ * RFCSR 22:
+ */
+ #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
++#define RFCSR22_FREQPLAN_D_MT7620 FIELD8(0x07)
+
+ /*
+ * RFCSR 23:
+@@ -2288,6 +2458,11 @@ struct mac_iveiv_entry {
+ #define RFCSR27_R4 FIELD8(0x40)
+
+ /*
++ * RFCSR 28:
++ */
++#define RFCSR28_CH11_HT40 FIELD8(0x04)
++
++/*
+ * RFCSR 29:
+ */
+ #define RFCSR29_ADC6_TEST FIELD8(0x01)
+@@ -2348,6 +2523,7 @@ struct mac_iveiv_entry {
+ */
+ #define RFCSR42_BIT1 FIELD8(0x01)
+ #define RFCSR42_BIT4 FIELD8(0x08)
++#define RFCSR42_TX2_EN_MT7620 FIELD8(0x40)
+
+ /*
+ * RFCSR 49:
+@@ -2450,6 +2626,7 @@ enum rt2800_eeprom_word {
EEPROM_TSSI_BOUND_BG5,
EEPROM_TXPOWER_A1,
EEPROM_TXPOWER_A2,
@@ -266,6 +367,17 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
EEPROM_TSSI_BOUND_A1,
EEPROM_TSSI_BOUND_A2,
EEPROM_TSSI_BOUND_A3,
+@@ -3019,6 +3196,10 @@ enum rt2800_eeprom_word {
+ struct rt2800_drv_data {
+ u8 calibration_bw20;
+ u8 calibration_bw40;
++ char rx_calibration_bw20;
++ char rx_calibration_bw40;
++ char tx_calibration_bw20;
++ char tx_calibration_bw40;
+ u8 bbp25;
+ u8 bbp26;
+ u8 txmixer_gain_24g;
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -60,6 +60,9 @@
@@ -288,8 +400,8 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+ switch (rt2x00dev->chip.rf) {
-+ case RF7620:
++ switch (rt2x00dev->chip.rt) {
++ case RT6352:
+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, RF_CSR_CFG_DATA_MT7620, value);
@@ -351,8 +463,8 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+ switch (rt2x00dev->chip.rf) {
-+ case RF7620:
++ switch (rt2x00dev->chip.rt) {
++ case RT6352:
+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
+ reg = 0;
+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620,
@@ -367,11 +479,11 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
- }
+ WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®);
+ }
-
-- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620);
+ break;
-+
+
+- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+ default:
+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
+ reg = 0;
@@ -408,24 +520,25 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
[EEPROM_TSSI_BOUND_A1] = 0x006a,
[EEPROM_TSSI_BOUND_A2] = 0x006b,
[EEPROM_TSSI_BOUND_A3] = 0x006c,
-@@ -526,6 +593,16 @@ void rt2800_get_txwi_rxwi_size(struct rt
- *rxwi_size = RXWI_DESC_SIZE_5WORDS;
+@@ -527,6 +594,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
break;
-+ case RT5390:
-+ if (rt2x00dev->chip.rf == RF7620) {
-+ *txwi_size = TXWI_DESC_SIZE_5WORDS;
-+ *rxwi_size = RXWI_DESC_SIZE_6WORDS;
-+ } else {
-+ *txwi_size = TXWI_DESC_SIZE_4WORDS;
-+ *rxwi_size = RXWI_DESC_SIZE_4WORDS;
-+ }
-+ break;
-+
case RT5592:
++ case RT6352:
*txwi_size = TXWI_DESC_SIZE_5WORDS;
*rxwi_size = RXWI_DESC_SIZE_6WORDS;
-@@ -3258,6 +3335,258 @@ static void rt2800_config_channel_rf55xx
+ break;
+@@ -2964,7 +3032,8 @@ static void rt2800_config_channel_rf53xx
+ rt2800_rfcsr_write(rt2x00dev, 59,
+ r59_nonbt_rev[idx]);
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+- rt2x00_rt(rt2x00dev, RT5392)) {
++ rt2x00_rt(rt2x00dev, RT5392) ||
++ rt2x00_rt(rt2x00dev, RT6352)) {
+ static const char r59_non_bt[] = {0x8f, 0x8f,
+ 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
+ 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
+@@ -3258,6 +3327,242 @@ static void rt2800_config_channel_rf55xx
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
}
@@ -435,97 +548,85 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ struct channel_info *info)
+{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-+ u8 txrx_agc_fc;
++ u8 rx_agc_fc, tx_agc_fc;
+ u8 rfcsr;
+
+ /* Frequeny plan setting */
-+ /* Rdiv setting (stored in rf->rf1)
++ /* Rdiv setting (set 0x03 if Xtal==20)
+ * R13[1:0]
+ */
+ rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
-+ rfcsr = rfcsr & (~0x03);
-+ if (rt2800_clk_is_20mhz(rt2x00dev))
-+ rfcsr |= (rf->rf1 & 0x03);
-+
++ rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620,
++ rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0);
+ rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
+
-+ /* N setting (stored in rf->rf2)
-+ * R21[0], R20[7:0]
++ /* N setting
++ * R20[7:0] in rf->rf1
++ * R21[0] always 0
+ */
+ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
-+ rfcsr = (rf->rf2 & 0x00ff);
++ rfcsr = (rf->rf1 & 0x00ff);
+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
-+ rfcsr = rfcsr & (~0x01);
-+ rfcsr |= ((rf->rf2 & 0x0100) >> 8);
++ rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0);
+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
+
-+ /* K setting (stored in rf->rf3[0:7])
++ /* K setting (always 0)
+ * R16[3:0] (RF PLL freq selection)
+ */
+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr);
-+ rfcsr = rfcsr & (~0x0f);
-+ rfcsr |= (rf->rf3 & 0x0f);
++ rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0);
+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
+
-+ /* D setting (stored in rf->rf3[8:15])
++ /* D setting (always 0)
+ * R22[2:0] (D=15, R22[2:0]=<111>)
+ */
+ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rfcsr = rfcsr & (~0x07);
-+ rfcsr |= ((rf->rf3 >> 8) & 0x07);
++ rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0);
+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
-+ /* Ksd setting (stored in rf->rf4)
-+ * Ksd: R19<1:0>,R18<7:0>,R17<7:0>
++ /* Ksd setting
++ * Ksd: R17<7:0> in rf->rf2
++ * R18<7:0> in rf->rf3
++ * R19<1:0> in rf->rf4
+ */
+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
-+ rfcsr = (rf->rf4 & 0x000000ff);
++ rfcsr = rf->rf2;
+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr);
-+ rfcsr = ((rf->rf4 & 0x0000ff00) >> 8);
++ rfcsr = rf->rf3;
+ rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 19, &rfcsr);
-+ rfcsr = rfcsr & (~0x03);
-+ rfcsr |= ((rf->rf4 & 0x00030000) >> 16);
++ rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
+ rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
+
+ /* Default: XO=20MHz , SDM mode */
+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr);
-+ rfcsr = rfcsr & (~0xE0);
-+ rfcsr |= 0x80;
++ rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
-+ rfcsr |= 0x80;
++ rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1);
+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
-+ if (rt2x00dev->default_ant.tx_chain_num == 1)
-+ rfcsr &= (~0x2);
-+ else
-+ rfcsr |= 0x2;
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
++ rt2x00dev->default_ant.tx_chain_num != 1);
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
-+ if (rt2x00dev->default_ant.tx_chain_num == 1)
-+ rfcsr &= (~0x20);
-+ else
-+ rfcsr |= 0x20;
-+ if (rt2x00dev->default_ant.rx_chain_num == 1)
-+ rfcsr &= (~0x02);
-+ else
-+ rfcsr |= 0x02;
++ rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620,
++ rt2x00dev->default_ant.tx_chain_num != 1);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620,
++ rt2x00dev->default_ant.rx_chain_num != 1);
+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 42, &rfcsr);
-+ if (rt2x00dev->default_ant.tx_chain_num == 1)
-+ rfcsr &= (~0x40);
-+ else
-+ rfcsr |= 0x40;
++ rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620,
++ rt2x00dev->default_ant.tx_chain_num != 1);
+ rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
+
+ /* RF for DC Cal BW */
@@ -552,54 +653,50 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ }
+
+ rt2800_rfcsr_read(rt2x00dev, 28, &rfcsr);
-+ if (conf_is_ht40(conf) && (rf->channel == 11))
-+ rfcsr |= 0x4;
-+ else
-+ rfcsr &= (~0x4);
++ rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40,
++ conf_is_ht40(conf) && (rf->channel == 11));
+ rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
+
+ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
+ if (conf_is_ht40(conf)) {
-+ txrx_agc_fc = rt2x00_get_field8(
-+ drv_data->calibration_bw40,
-+ RFCSR24_TX_AGC_FC);
++ rx_agc_fc = drv_data->rx_calibration_bw40;
++ tx_agc_fc = drv_data->tx_calibration_bw40;
+ } else {
-+ txrx_agc_fc = rt2x00_get_field8(
-+ drv_data->calibration_bw20,
-+ RFCSR24_TX_AGC_FC);
++ rx_agc_fc = drv_data->rx_calibration_bw20;
++ tx_agc_fc = drv_data->tx_calibration_bw20;
+ }
+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= rx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= rx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= rx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= rx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr);
+
+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr);
+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr);
+ rfcsr &= (~0x3F);
-+ rfcsr |= txrx_agc_fc;
++ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
+ }
+}
@@ -684,7 +781,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
const unsigned int word,
const u8 value)
-@@ -3414,7 +3743,7 @@ static void rt2800_config_channel(struct
+@@ -3414,7 +3719,7 @@ static void rt2800_config_channel(struct
struct channel_info *info)
{
u32 reg;
@@ -693,7 +790,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
u8 bbp, rfcsr;
info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
-@@ -3468,6 +3797,9 @@ static void rt2800_config_channel(struct
+@@ -3468,6 +3773,9 @@ static void rt2800_config_channel(struct
case RF5592:
rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
break;
@@ -703,16 +800,26 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
default:
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
}
-@@ -3574,7 +3906,7 @@ static void rt2800_config_channel(struct
+@@ -3551,7 +3859,8 @@ static void rt2800_config_channel(struct
+
+ if (rf->channel <= 14) {
+ if (!rt2x00_rt(rt2x00dev, RT5390) &&
+- !rt2x00_rt(rt2x00dev, RT5392)) {
++ !rt2x00_rt(rt2x00dev, RT5392) &&
++ !rt2x00_rt(rt2x00dev, RT6352)) {
+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+@@ -3574,7 +3883,7 @@ static void rt2800_config_channel(struct
else if (rt2x00_rt(rt2x00dev, RT3593) ||
rt2x00_rt(rt2x00dev, RT3883))
rt2800_bbp_write(rt2x00dev, 82, 0x82);
- else
-+ else if (rt2x00dev->chip.rf != RF7620)
++ else if (!rt2x00_rt(rt2x00dev, RT6352))
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
if (rt2x00_rt(rt2x00dev, RT3593) ||
-@@ -3596,7 +3928,7 @@ static void rt2800_config_channel(struct
+@@ -3596,7 +3905,7 @@ static void rt2800_config_channel(struct
if (rt2x00_rt(rt2x00dev, RT3572))
rt2800_rfcsr_write(rt2x00dev, 8, 0);
@@ -721,7 +828,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
-@@ -3645,6 +3977,7 @@ static void rt2800_config_channel(struct
+@@ -3645,6 +3954,7 @@ static void rt2800_config_channel(struct
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
@@ -729,21 +836,20 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-@@ -3720,7 +4053,8 @@ static void rt2800_config_channel(struct
+@@ -3720,7 +4030,7 @@ static void rt2800_config_channel(struct
usleep_range(1000, 1500);
}
- if (rt2x00_rt(rt2x00dev, RT5592)) {
-+ if (rt2x00_rt(rt2x00dev, RT5592) ||
-+ (rt2x00_rt(rt2x00dev, RT5390) && rt2x00_rf(rt2x00dev, RF7620))) {
++ if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
rt2800_bbp_write(rt2x00dev, 195, 141);
rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
-@@ -4410,6 +4744,128 @@ static void rt2800_config_txpower_rt3593
+@@ -4410,6 +4720,128 @@ static void rt2800_config_txpower_rt3593
(unsigned long) regs[i]);
}
-+static void rt2800_config_txpower_mt7620(struct rt2x00_dev *rt2x00dev,
++static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_channel *chan,
+ int power_level)
+{
@@ -761,7 +867,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n",
+ delta);
+
-+ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT40, limit
++ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit
+ * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor
+ * driver does as well, though it looks kinda wrong.
+ * Maybe some misunderstanding of what a signed 8-bit value is? Maybe
@@ -827,9 +933,9 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ /* Aparently Ralink ran out of space in the BYRATE calibration section
+ * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x
+ * registers. As recent 2T chips use 8-bit instead of 4-bit values for
-+ * power-offsets more space would be needed. Ralink decided to rather
-+ * keep the EEPROM layout untouched and rather have some shared values
-+ * covering multiple bitrates.
++ * power-offsets more space would be needed. Ralink decided to keep the
++ * EEPROM layout untouched and rather have some shared values covering
++ * multiple bitrates.
+ * Populate the registers not covered by the EEPROM in the same way the
+ * vendor driver does.
+ */
@@ -868,16 +974,16 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
* BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
-@@ -4607,6 +5063,8 @@ static void rt2800_config_txpower(struct
+@@ -4607,6 +5039,8 @@ static void rt2800_config_txpower(struct
if (rt2x00_rt(rt2x00dev, RT3593) ||
rt2x00_rt(rt2x00dev, RT3883))
rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
-+ else if (rt2x00_rf(rt2x00dev, RF7620))
-+ rt2800_config_txpower_mt7620(rt2x00dev, chan, power_level);
++ else if (rt2x00_rt(rt2x00dev, RT6352))
++ rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
else
rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
}
-@@ -4622,6 +5080,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4622,6 +5056,7 @@ void rt2800_vco_calibration(struct rt2x0
{
u32 tx_pin;
u8 rfcsr;
@@ -885,7 +991,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
/*
* A voltage-controlled oscillator(VCO) is an electronic oscillator
-@@ -4661,6 +5120,15 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4661,6 +5096,15 @@ void rt2800_vco_calibration(struct rt2x0
rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
@@ -901,7 +1007,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
break;
default:
WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration",
-@@ -4668,7 +5136,8 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4668,7 +5112,8 @@ void rt2800_vco_calibration(struct rt2x0
return;
}
@@ -911,11 +1017,11 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
if (rt2x00dev->rf_channel <= 14) {
-@@ -4700,6 +5169,42 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4700,6 +5145,42 @@ void rt2800_vco_calibration(struct rt2x0
}
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-+ if (rt2x00_rf(rt2x00dev, RF7620)) {
++ if (rt2x00_rt(rt2x00dev, RT6352)) {
+ if (rt2x00dev->default_ant.tx_chain_num == 1) {
+ rt2800_bbp_write(rt2x00dev, 91, 0x07);
+ rt2800_bbp_write(rt2x00dev, 95, 0x1A);
@@ -954,11 +1060,31 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
}
EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
-@@ -5037,6 +5542,24 @@ static int rt2800_init_registers(struct
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
+@@ -4798,7 +5279,8 @@ static u8 rt2800_get_default_vgc(struct
+ rt2x00_rt(rt2x00dev, RT3593) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392) ||
+- rt2x00_rt(rt2x00dev, RT5592))
++ rt2x00_rt(rt2x00dev, RT5592) ||
++ rt2x00_rt(rt2x00dev, RT6352))
+ vgc = 0x1c + (2 * rt2x00dev->lna_gain);
+ else
+ vgc = 0x2e + rt2x00dev->lna_gain;
+@@ -5038,7 +5520,8 @@ static int rt2800_init_registers(struct
rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
-+ } else if (rt2x00_rf(rt2x00dev, RF7620)) {
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+- rt2x00_rt(rt2x00dev, RT5392)) {
++ rt2x00_rt(rt2x00dev, RT5392) ||
++ rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+@@ -5048,6 +5531,24 @@ static int rt2800_init_registers(struct
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ } else if (rt2x00_rt(rt2x00dev, RT5350)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
++ } else if (rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -976,10 +1102,10 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®);
+ rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
-@@ -6075,6 +6598,224 @@ static void rt2800_init_bbp_5592(struct
+ } else {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+@@ -6075,6 +6576,231 @@ static void rt2800_init_bbp_5592(struct
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
@@ -997,7 +1123,14 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ rt2800_bbp_write(rt2x00dev, 159, value);
+}
+
-+static void rt2800_init_bbp_7620(struct rt2x00_dev *rt2x00dev)
++static void rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev,
++ const u8 reg, u8 *value)
++{
++ rt2800_bbp_write(rt2x00dev, 158, reg);
++ rt2800_bbp_read(rt2x00dev, 159, value);
++}
++
++static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
+{
+ u8 bbp;
+
@@ -1204,23 +1337,364 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
-@@ -6117,7 +6858,10 @@ static void rt2800_init_bbp(struct rt2x0
- return;
- case RT5390:
- case RT5392:
-- rt2800_init_bbp_53xx(rt2x00dev);
-+ if (rt2x00dev->chip.rf == RF7620)
-+ rt2800_init_bbp_7620(rt2x00dev);
-+ else
-+ rt2800_init_bbp_53xx(rt2x00dev);
- break;
+@@ -6122,6 +6848,9 @@ static void rt2800_init_bbp(struct rt2x0
case RT5592:
rt2800_init_bbp_5592(rt2x00dev);
-@@ -7331,6 +8075,269 @@ static void rt2800_init_rfcsr_5592(struc
+ return;
++ case RT6352:
++ rt2800_init_bbp_6352(rt2x00dev);
++ break;
+ }
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+@@ -7331,6 +8060,615 @@ static void rt2800_init_rfcsr_5592(struc
rt2800_led_open_drain_enable(rt2x00dev);
}
-+static void rt2800_init_rfcsr_7620(struct rt2x00_dev *rt2x00dev)
++static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
++ bool set_bw, bool is_ht40)
++{
++ u8 bbp_val;
++
++ rt2800_bbp_read(rt2x00dev, 21, &bbp_val);
++ bbp_val |= 0x1;
++ rt2800_bbp_write(rt2x00dev, 21, bbp_val);
++ usleep_range(100, 200);
++
++ if (set_bw) {
++ rt2800_bbp_read(rt2x00dev, 4, &bbp_val);
++ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40);
++ rt2800_bbp_write(rt2x00dev, 4, bbp_val);
++ usleep_range(100, 200);
++ }
++
++ rt2800_bbp_read(rt2x00dev, 21, &bbp_val);
++ bbp_val &= (~0x1);
++ rt2800_bbp_write(rt2x00dev, 21, bbp_val);
++ usleep_range(100, 200);
++}
++
++static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal)
++{
++ u8 rf_val;
++
++ if (btxcal)
++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
++ else
++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02);
++
++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &rf_val);
++ rf_val |= 0x80;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val);
++
++ if (btxcal) {
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val);
++ rf_val &= (~0x3F);
++ rf_val |= 0x3F;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val);
++ rf_val &= (~0x3F);
++ rf_val |= 0x3F;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31);
++ } else {
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val);
++ rf_val &= (~0x3F);
++ rf_val |= 0x34;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val);
++ rf_val &= (~0x3F);
++ rf_val |= 0x34;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
++ }
++
++ return 0;
++}
++
++static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int cnt;
++ u8 bbp_val;
++ char cal_val;
++
++ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82);
++
++ cnt = 0;
++ do {
++ usleep_range(500, 2000);
++ rt2800_bbp_read(rt2x00dev, 159, &bbp_val);
++ if (bbp_val == 0x02 || cnt == 20)
++ break;
++
++ cnt++;
++ } while (cnt < 20);
++
++ rt2800_bbp_dcoc_read(rt2x00dev, 0x39, &bbp_val);
++ cal_val = bbp_val & 0x7F;
++ if (cal_val >= 0x40)
++ cal_val -= 128;
++
++ return cal_val;
++}
++
++static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev,
++ bool btxcal)
++{
++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
++ u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc;
++ u8 filter_target;
++ u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02;
++ u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31;
++ int loop = 0, is_ht40, cnt;
++ u8 bbp_val, rf_val;
++ char cal_r32_init, cal_r32_val, cal_diff;
++ u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05;
++ u8 saverfb5r06, saverfb5r07;
++ u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20;
++ u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41;
++ u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46;
++ u8 saverfb5r58, saverfb5r59;
++ u8 savebbp159r0, savebbp159r2, savebbpr23;
++ u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0;
++
++ /* Save MAC registers */
++ rt2800_register_read(rt2x00dev, RF_CONTROL0, &MAC_RF_CONTROL0);
++ rt2800_register_read(rt2x00dev, RF_BYPASS0, &MAC_RF_BYPASS0);
++
++ /* save BBP registers */
++ rt2800_bbp_read(rt2x00dev, 23, &savebbpr23);
++
++ rt2800_bbp_dcoc_read(rt2x00dev, 0, &savebbp159r0);
++ rt2800_bbp_dcoc_read(rt2x00dev, 2, &savebbp159r2);
++
++ /* Save RF registers */
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &saverfb5r00);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &saverfb5r01);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &saverfb5r03);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &saverfb5r04);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 5, &saverfb5r05);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &saverfb5r06);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &saverfb5r07);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &saverfb5r08);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &saverfb5r17);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 18, &saverfb5r18);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 19, &saverfb5r19);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 20, &saverfb5r20);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 37, &saverfb5r37);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 38, &saverfb5r38);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 39, &saverfb5r39);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 40, &saverfb5r40);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 41, &saverfb5r41);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 42, &saverfb5r42);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 43, &saverfb5r43);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 44, &saverfb5r44);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 45, &saverfb5r45);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 46, &saverfb5r46);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &saverfb5r58);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &saverfb5r59);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val);
++ rf_val |= 0x3;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val);
++ rf_val |= 0x1;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val);
++
++ cnt = 0;
++ do {
++ usleep_range(500, 2000);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val);
++ if (((rf_val & 0x1) == 0x00) || (cnt == 40))
++ break;
++ cnt++;
++ } while (cnt < 40);
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val);
++ rf_val &= (~0x3);
++ rf_val |= 0x1;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
++
++ /* I-3 */
++ rt2800_bbp_read(rt2x00dev, 23, &bbp_val);
++ bbp_val &= (~0x1F);
++ bbp_val |= 0x10;
++ rt2800_bbp_write(rt2x00dev, 23, bbp_val);
++
++ do {
++ /* I-4,5,6,7,8,9 */
++ if (loop == 0) {
++ is_ht40 = false;
++
++ if (btxcal)
++ filter_target = tx_filter_target_20m;
++ else
++ filter_target = rx_filter_target_20m;
++ } else {
++ is_ht40 = true;
++
++ if (btxcal)
++ filter_target = tx_filter_target_40m;
++ else
++ filter_target = rx_filter_target_40m;
++ }
++
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &rf_val);
++ rf_val &= (~0x04);
++ if (loop == 1)
++ rf_val |= 0x4;
++
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val);
++
++ rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40);
++
++ rt2800_rf_lp_config(rt2x00dev, btxcal);
++ if (btxcal) {
++ tx_agc_fc = 0;
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val);
++ rf_val &= (~0x7F);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val);
++ rf_val &= (~0x7F);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
++ } else {
++ rx_agc_fc = 0;
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val);
++ rf_val &= (~0x7F);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val);
++ rf_val &= (~0x7F);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
++ }
++
++ usleep_range(1000, 2000);
++
++ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val);
++ bbp_val &= (~0x6);
++ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
++
++ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
++
++ cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
++
++ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val);
++ bbp_val |= 0x6;
++ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
++do_cal:
++ if (btxcal) {
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val);
++ rf_val &= (~0x7F);
++ rf_val |= tx_agc_fc;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val);
++ rf_val &= (~0x7F);
++ rf_val |= tx_agc_fc;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
++ } else {
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val);
++ rf_val &= (~0x7F);
++ rf_val |= rx_agc_fc;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val);
++ rf_val &= (~0x7F);
++ rf_val |= rx_agc_fc;
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
++ }
++
++ usleep_range(500, 1000);
++
++ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
++
++ cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
++
++ cal_diff = cal_r32_init - cal_r32_val;
++
++ if (btxcal)
++ cmm_agc_fc = tx_agc_fc;
++ else
++ cmm_agc_fc = rx_agc_fc;
++
++ if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) ||
++ ((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) {
++ if (btxcal)
++ tx_agc_fc = 0;
++ else
++ rx_agc_fc = 0;
++ } else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) {
++ if (btxcal)
++ tx_agc_fc++;
++ else
++ rx_agc_fc++;
++ goto do_cal;
++ }
++
++ if (btxcal) {
++ if (loop == 0)
++ drv_data->tx_calibration_bw20 = tx_agc_fc;
++ else
++ drv_data->tx_calibration_bw40 = tx_agc_fc;
++ } else {
++ if (loop == 0)
++ drv_data->rx_calibration_bw20 = rx_agc_fc;
++ else
++ drv_data->rx_calibration_bw40 = rx_agc_fc;
++ }
++
++ loop++;
++ } while (loop <= 1);
++
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20);
++
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46);
++
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58);
++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59);
++
++ rt2800_bbp_write(rt2x00dev, 23, savebbpr23);
++
++ rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0);
++ rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2);
++
++ rt2800_bbp_read(rt2x00dev, 4, &bbp_val);
++ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH,
++ 2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags));
++ rt2800_bbp_write(rt2x00dev, 4, bbp_val);
++
++ rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0);
++ rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0);
++}
++
++static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
+{
+ /* Initialize RF central register to default value */
+ rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
@@ -1481,24 +1955,35 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+
+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
++
++ rt2800_bw_filter_calibration(rt2x00dev, true);
++ rt2800_bw_filter_calibration(rt2x00dev, false);
+}
+
static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
{
if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -7366,7 +8373,10 @@ static void rt2800_init_rfcsr(struct rt2
- rt2800_init_rfcsr_5350(rt2x00dev);
- break;
- case RT5390:
-- rt2800_init_rfcsr_5390(rt2x00dev);
-+ if (rt2x00dev->chip.rf == RF7620)
-+ rt2800_init_rfcsr_7620(rt2x00dev);
-+ else
-+ rt2800_init_rfcsr_5390(rt2x00dev);
+@@ -7374,6 +8712,9 @@ static void rt2800_init_rfcsr(struct rt2
+ case RT5592:
+ rt2800_init_rfcsr_5592(rt2x00dev);
break;
- case RT5392:
- rt2800_init_rfcsr_5392(rt2x00dev);
-@@ -7780,6 +8790,7 @@ static int rt2800_init_eeprom(struct rt2
++ case RT6352:
++ rt2800_init_rfcsr_6352(rt2x00dev);
++ break;
+ }
+ }
+
+@@ -7745,7 +9086,8 @@ static int rt2800_init_eeprom(struct rt2
+ */
+ if (rt2x00_rt(rt2x00dev, RT3290) ||
+ rt2x00_rt(rt2x00dev, RT5390) ||
+- rt2x00_rt(rt2x00dev, RT5392))
++ rt2x00_rt(rt2x00dev, RT5392) ||
++ rt2x00_rt(rt2x00dev, RT6352))
+ rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
+ else if (rt2x00_rt(rt2x00dev, RT3352))
+ rf = RF3322;
+@@ -7780,6 +9122,7 @@ static int rt2800_init_eeprom(struct rt2
case RF5390:
case RF5392:
case RF5592:
@@ -1506,32 +1991,31 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
break;
default:
rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -8258,6 +9269,24 @@ static const struct rf_channel rf_vals_5
+@@ -8258,6 +9601,23 @@ static const struct rf_channel rf_vals_5
{196, 83, 0, 12, 1},
};
+static const struct rf_channel rf_vals_7620[] = {
-+ /* Channel, Rdiv, N, K | (D >> 8), Ksd */
-+ {1, 3, 0x50, 0 | (0 >> 8), 0x19999},
-+ {2, 3, 0x50, 0 | (0 >> 8), 0x24444},
-+ {3, 3, 0x50, 0 | (0 >> 8), 0x2EEEE},
-+ {4, 3, 0x50, 0 | (0 >> 8), 0x39999},
-+ {5, 3, 0x51, 0 | (0 >> 8), 0x04444},
-+ {6, 3, 0x51, 0 | (0 >> 8), 0x0EEEE},
-+ {7, 3, 0x51, 0 | (0 >> 8), 0x19999},
-+ {8, 3, 0x51, 0 | (0 >> 8), 0x24444},
-+ {9, 3, 0x51, 0 | (0 >> 8), 0x2EEEE},
-+ {10, 3, 0x51, 0 | (0 >> 8), 0x39999},
-+ {11, 3, 0x52, 0 | (0 >> 8), 0x04444},
-+ {12, 3, 0x52, 0 | (0 >> 8), 0x0EEEE},
-+ {13, 3, 0x52, 0 | (0 >> 8), 0x19999},
-+ {14, 3, 0x52, 0 | (0 >> 8), 0x33333},
++ {1, 0x50, 0x99, 0x99, 1},
++ {2, 0x50, 0x44, 0x44, 2},
++ {3, 0x50, 0xEE, 0xEE, 2},
++ {4, 0x50, 0x99, 0x99, 3},
++ {5, 0x51, 0x44, 0x44, 0},
++ {6, 0x51, 0xEE, 0xEE, 0},
++ {7, 0x51, 0x99, 0x99, 1},
++ {8, 0x51, 0x44, 0x44, 2},
++ {9, 0x51, 0xEE, 0xEE, 2},
++ {10, 0x51, 0x99, 0x99, 3},
++ {11, 0x52, 0x44, 0x44, 0},
++ {12, 0x52, 0xEE, 0xEE, 0},
++ {13, 0x52, 0x99, 0x99, 1},
++ {14, 0x52, 0x33, 0x33, 3},
+};
+
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -8361,6 +9390,11 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8361,6 +9721,11 @@ static int rt2800_probe_hw_mode(struct r
spec->channels = rf_vals_3x;
break;
@@ -1543,7 +2027,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
case RF3052:
case RF3053:
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
-@@ -8498,6 +9532,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8498,6 +9863,7 @@ static int rt2800_probe_hw_mode(struct r
case RF5390:
case RF5392:
case RF5592:
@@ -1551,3 +2035,23 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
__set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
break;
}
+@@ -8543,6 +9909,9 @@ static int rt2800_probe_rt(struct rt2x00
+ return -ENODEV;
+ }
+
++ if (rt == RT5390 && rt2x00_is_soc(rt2x00dev))
++ rt = RT6352;
++
+ rt2x00_set_rt(rt2x00dev, rt, rev);
+
+ return 0;
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -175,6 +175,7 @@ struct rt2x00_chip {
+ #define RT5390 0x5390 /* 2.4GHz */
+ #define RT5392 0x5392 /* 2.4GHz */
+ #define RT5592 0x5592
++#define RT6352 0x6352 /* WSOC 2.4GHz */
+
+ u16 rf;
+ u16 rev;
More information about the lede-commits
mailing list