[source] ipq806x: clean up dts patch
LEDE Commits
lede-commits at lists.infradead.org
Wed Mar 8 05:38:33 PST 2017
nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/92b5b360fe39a4e446742ab3de9d0b2f91991d46
commit 92b5b360fe39a4e446742ab3de9d0b2f91991d46
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Tue Mar 7 20:40:25 2017 +0100
ipq806x: clean up dts patch
Move dts files to files/, remove useless patch chunks
Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
.../arch/arm/boot/dts/qcom-ipq8064-c2600.dts | 501 ++
.../arch/arm/boot/dts/qcom-ipq8064-d7800.dts | 406 ++
.../arch/arm/boot/dts/qcom-ipq8064-db149.dts | 236 +
.../arch/arm/boot/dts/qcom-ipq8064-ea8500.dts | 399 ++
.../arch/arm/boot/dts/qcom-ipq8064-r7500.dts | 373 ++
.../arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts | 416 ++
.../arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts | 425 ++
.../arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts | 388 ++
.../arch/arm/boot/dts/qcom-ipq8065-r7800.dts | 566 +++
.../arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi | 1 +
.../files-4.9/arch/arm/boot/dts/qcom-ipq8065.dtsi | 153 +
target/linux/ipq806x/patches-4.9/999-dts.patch | 5341 +++-----------------
12 files changed, 4509 insertions(+), 4696 deletions(-)
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
new file mode 100644
index 0000000..80bc5df
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -0,0 +1,501 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link Archer C2600";
+ compatible = "tplink,c2600", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio16", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+ "gpio53", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ usb0_pwr_en_pin: usb0_pwr_en_pin {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pin: usb1_pwr_en_pin {
+ mux {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ gsbi5: gsbi at 1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi5: spi at 1a280000 {
+ status = "ok";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash: m25p80 at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ SBL1 at 0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ MIBIB at 20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ SBL2 at 40000 {
+ label = "SBL2";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ SBL3 at 60000 {
+ label = "SBL3";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ DDRCONFIG at 90000 {
+ label = "DDRCONFIG";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ SSD at a0000 {
+ label = "SSD";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ TZ at b0000 {
+ label = "TZ";
+ reg = <0xb0000 0x30000>;
+ read-only;
+ };
+
+ RPM at e0000 {
+ label = "RPM";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ fs-uboot at 100000 {
+ label = "fs-uboot";
+ reg = <0x100000 0x70000>;
+ read-only;
+ };
+
+ uboot-env at 170000 {
+ label = "uboot-env";
+ reg = <0x170000 0x40000>;
+ read-only;
+ };
+
+ radio at 1b0000 {
+ label = "radio";
+ reg = <0x1b0000 0x40000>;
+ read-only;
+ };
+
+ os-image at 1f0000 {
+ label = "os-image";
+ reg = <0x1f0000 0x200000>;
+ };
+
+ rootfs at 3f0000 {
+ label = "rootfs";
+ reg = <0x3f0000 0x1b00000>;
+ };
+
+ defaultmac: default-mac at 1ef0000 {
+ label = "default-mac";
+ reg = <0x1ef0000 0x00200>;
+ read-only;
+ };
+
+ pin at 1ef0200 {
+ label = "pin";
+ reg = <0x1ef0200 0x00200>;
+ read-only;
+ };
+
+ product-info at 1ef0400 {
+ label = "product-info";
+ reg = <0x1ef0400 0x0fc00>;
+ read-only;
+ };
+
+ partition-table at 1f00000 {
+ label = "partition-table";
+ reg = <0x1f00000 0x10000>;
+ read-only;
+ };
+
+ soft-version at 1f10000 {
+ label = "soft-version";
+ reg = <0x1f10000 0x10000>;
+ read-only;
+ };
+
+ support-list at 1f20000 {
+ label = "support-list";
+ reg = <0x1f20000 0x10000>;
+ read-only;
+ };
+
+ profile at 1f30000 {
+ label = "profile";
+ reg = <0x1f30000 0x10000>;
+ read-only;
+ };
+
+ default-config at 1f40000 {
+ label = "default-config";
+ reg = <0x1f40000 0x10000>;
+ read-only;
+ };
+
+ user-config at 1f50000 {
+ label = "user-config";
+ reg = <0x1f50000 0x40000>;
+ read-only;
+ };
+
+ qos-db at 1f90000 {
+ label = "qos-db";
+ reg = <0x1f90000 0x40000>;
+ read-only;
+ };
+
+ usb-config at 1fd0000 {
+ label = "usb-config";
+ reg = <0x1fd0000 0x10000>;
+ read-only;
+ };
+
+ log at 1fe0000 {
+ label = "log";
+ reg = <0x1fe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pin>;
+ pinctrl-names = "default";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pin>;
+ pinctrl-names = "default";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&defaultmac 0x8>;
+ mtd-mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&defaultmac 0x8>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ lan {
+ label = "c2600:white:lan";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb4 {
+ label = "c2600:white:usb_4";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "c2600:white:usb_2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "c2600:white:wps";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "c2600:amber:wan";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_white {
+ label = "c2600:white:wan";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "c2600:white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ general: general {
+ label = "c2600:white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
new file mode 100644
index 0000000..1610a75
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -0,0 +1,406 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 D7800";
+ compatible = "netgear,d7800", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ };
+
+ nand at 1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata at 0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL at c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV at 1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art at 1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ artbak: art at 1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel at 1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0200000>;
+ };
+
+ ubi at 1680000 {
+ label = "ubi";
+ reg = <0x1680000 0x1E00000>;
+ };
+
+ netgear at 3480000 {
+ label = "netgear";
+ reg = <0x3480000 0x4480000>;
+ read-only;
+ };
+
+ reserve at 7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+
+ firmware at 1480000 {
+ label = "firmware";
+ reg = <0x1480000 0x2000000>;
+ };
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&art 6>;
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&art 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "d7800:white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "d7800:white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "d7800:amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "d7800:white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "d7800:amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "d7800:white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "d7800:white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "d7800:white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "d7800:white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-db149.dts
new file mode 100644
index 0000000..4c56866
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -0,0 +1,236 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/DB149";
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ alias {
+ serial0 = &uart2;
+ mdio-gpio0 = &mdio0;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ bias-disable;
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ };
+
+ gsbi2: gsbi at 12480000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ uart2: serial at 12490000 {
+ status = "ok";
+ };
+ };
+
+ gsbi5: gsbi at 1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi at 1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80 at 0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ m25p,fast-read;
+
+ partition at 0 {
+ label = "lowlevel_init";
+ reg = <0x0 0x1b0000>;
+ };
+
+ partition at 1 {
+ label = "u-boot";
+ reg = <0x1b0000 0x80000>;
+ };
+
+ partition at 2 {
+ label = "u-boot-env";
+ reg = <0x230000 0x40000>;
+ };
+
+ partition at 3 {
+ label = "caldata";
+ reg = <0x270000 0x40000>;
+ };
+
+ partition at 4 {
+ label = "firmware";
+ reg = <0x2b0000 0x1d50000>;
+ };
+ };
+ };
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ };
+
+ pcie2: pci at 1b900000 {
+ status = "ok";
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy at 6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy at 7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
+
+ gmac0: ethernet at 37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+ };
+
+ gmac3: ethernet at 37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+ };
+ };
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
new file mode 100644
index 0000000..591e535
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -0,0 +1,399 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Linksys EA8500 WiFi Router";
+ compatible = "linksys,ea8500", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "console=ttyMSM0,115200n8";
+ linux,stdout-path = "serial0:115200n8";
+ append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio53", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie2: pci at 1b900000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ nand at 1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1 at 0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ MIBIB at 40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ SBL2 at 180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ SBL3 at 2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG at 540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ SSD at 660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ TZ at 780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ RPM at a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ art: art at c80000 {
+ label = "art";
+ reg = <0x0c80000 0x0140000>;
+ read-only;
+ };
+
+ APPSBL at dc0000 {
+ label = "APPSBL";
+ reg = <0x0dc0000 0x0100000>;
+ read-only;
+ };
+
+ u_env at ec0000 {
+ label = "u_env";
+ reg = <0x0ec0000 0x0040000>;
+ };
+
+ s_env at f00000 {
+ label = "s_env";
+ reg = <0x0f00000 0x0040000>;
+ };
+
+ devinfo at f40000 {
+ label = "devinfo";
+ reg = <0x0f40000 0x0040000>;
+ };
+
+ linux at f80000 {
+ label = "kernel1";
+ reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
+ };
+
+ rootfs at 1280000 {
+ label = "rootfs1";
+ reg = <0x1280000 0x2500000>;
+ };
+
+ linux2 at 3780000 {
+ label = "kernel2";
+ reg = <0x3780000 0x2800000>;
+ };
+
+ rootfs2 at 3a80000 {
+ label = "rootfs2";
+ reg = <0x3a80000 0x2500000>;
+ };
+
+ syscfg at 5f80000 {
+ label = "syscfg";
+ reg = <0x5f80000 0x2080000>;
+ };
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ //lan
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+
+ adm_dma: dma at 18300000 {
+ status = "ok";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART >;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "ea8500:green:wps";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "ea8500:white:power";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "ea8500:green:wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
new file mode 100644
index 0000000..f64948d
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -0,0 +1,373 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500";
+ compatible = "netgear,r7500", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ };
+
+ nand at 1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata at 0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL at c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV at 1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art at 1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ kernel at 1340000 {
+ label = "kernel";
+ reg = <0x1340000 0x0200000>;
+ };
+
+ ubi at 1540000 {
+ label = "ubi";
+ reg = <0x1540000 0x1800000>;
+ };
+
+ netgear at 2d40000 {
+ label = "netgear";
+ reg = <0x2d40000 0x0c00000>;
+ read-only;
+ };
+
+ reserve at 3940000 {
+ label = "reserve";
+ reg = <0x3940000 0x46c0000>;
+ read-only;
+ };
+
+ firmware at 1340000 {
+ label = "firmware";
+ reg = <0x1340000 0x1a00000>;
+ };
+
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&art 6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&art 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "r7500:white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "r7500:white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "r7500:amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "r7500:white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "r7500:amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "r7500:white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "r7500:white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "r7500:white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "r7500:white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
new file mode 100644
index 0000000..ccf215c
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -0,0 +1,416 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500v2";
+ compatible = "netgear,r7500v2", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+
+ rsvd at 5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ };
+
+ nand at 1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata at 0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL at c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV at 1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art at 1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ artbak: art at 1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel at 1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0200000>;
+ };
+
+ ubi at 1680000 {
+ label = "ubi";
+ reg = <0x1680000 0x1E00000>;
+ };
+
+ netgear at 3480000 {
+ label = "netgear";
+ reg = <0x3480000 0x4480000>;
+ read-only;
+ };
+
+ reserve at 7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+
+ firmware at 1480000 {
+ label = "firmware";
+ reg = <0x1480000 0x2000000>;
+ };
+
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&art 6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&art 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "r7500v2:amber:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3 {
+ label = "r7500v2:amber:usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ status {
+ label = "r7500v2:amber:status";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet {
+ label = "r7500v2:white:internet";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "r7500v2:white:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "r7500v2:white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "r7500v2:white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "r7500v2:white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "r7500v2:white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
new file mode 100644
index 0000000..b55a98d
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -0,0 +1,425 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link Archer VR2600v";
+ compatible = "tplink,vr2600v", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+ "gpio26", "gpio53", "gpio56", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ gsbi5: gsbi at 1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi at 1a280000 {
+ status = "ok";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash: W25Q128 at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ SBL1 at 0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ MIBIB at 20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ SBL2 at 40000 {
+ label = "SBL2";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ SBL3 at 80000 {
+ label = "SBL3";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ DDRCONFIG at 100000 {
+ label = "DDRCONFIG";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ SSD at 110000 {
+ label = "SSD";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ TZ at 120000 {
+ label = "TZ";
+ reg = <0x120000 0x80000>;
+ read-only;
+ };
+
+ RPM at 1a0000 {
+ label = "RPM";
+ reg = <0x1a0000 0x80000>;
+ read-only;
+ };
+
+ APPSBL at 220000 {
+ label = "APPSBL";
+ reg = <0x220000 0x80000>;
+ read-only;
+ };
+
+ APPSBLENV at 2a0000 {
+ label = "APPSBLENV";
+ reg = <0x2a0000 0x40000>;
+ read-only;
+ };
+
+ OLDART at 2e0000 {
+ label = "OLDART";
+ reg = <0x2e0000 0x40000>;
+ read-only;
+ };
+
+ kernel at 320000 {
+ label = "kernel";
+ reg = <0x320000 0x200000>;
+ };
+
+ rootfs at 520000 {
+ label = "rootfs";
+ reg = <0x520000 0xa60000>;
+ };
+
+ defaultmac: default-mac at 0xfaf100 {
+ label = "default-mac";
+ reg = <0xfaf100 0x00200>;
+ read-only;
+ };
+
+ ART at fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&defaultmac 0>;
+ mtd-mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&defaultmac 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ dsl {
+ label = "vr2600v:white:dsl";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "vr2600v:white:usb";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "vr2600v:white:lan";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "vr2600v:white:wlan2g";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "vr2600v:white:wlan5g";
+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "vr2600v:white:power";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ phone {
+ label = "vr2600v:white:phone";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "vr2600v:white:wan";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ general: general {
+ label = "vr2600v:white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
new file mode 100644
index 0000000..5fe14da
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -0,0 +1,388 @@
+#include "qcom-ipq8065-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ZyXEL NBG6817";
+ compatible = "zyxel,nbg6817", "qcom,ipq8065";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+ sdcc1 = &sdcc1;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio9", "gpio26", "gpio33", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio17";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio16";
+ bias-pull-up;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio14";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio15";
+ bias-pull-up;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ gsbi5: gsbi at 1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi at 1a280000 {
+ status = "ok";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash: m25p80 at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <51200000>;
+ reg = <0>;
+
+ linux,part-probe = "qcom-smem";
+ };
+ };
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+
+ amba {
+ sdcc1: sdcc at 12400000 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ internet {
+ label = "nbg6817:white:internet";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "nbg6817:white:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi2g {
+ label = "nbg6817:amber:wifi2g";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi2g amber from the manual is missing */
+
+ wifi5g {
+ label = "nbg6817:amber:wifi5g";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi5g amber from the manual is missing */
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
new file mode 100644
index 0000000..bf2fb96
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -0,0 +1,566 @@
+#include "qcom-ipq8065-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4S R7800";
+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory at 0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd at 41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+
+ rsvd at 5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux at 800000 {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pins {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ spi6_pins: spi6_pins {
+ mux {
+ pins = "gpio55", "gpio56", "gpio58";
+ function = "gsbi6";
+ bias-pull-down;
+ };
+
+ mosi {
+ pins = "gpio55";
+ drive-strength = <12>;
+ };
+
+ miso {
+ pins = "gpio56";
+ drive-strength = <14>;
+ };
+
+ cs {
+ pins = "gpio57";
+ drive-strength = <12>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio58";
+ drive-strength = <12>;
+ };
+
+ reset {
+ pins = "gpio33";
+ drive-strength = <10>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+ };
+
+ gsbi at 16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial at 16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ gsbi5: gsbi at 1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi5: spi at 1a280000 {
+ status = "ok";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash: m25p80 at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ linux,part-probe = "qcom-smem";
+ };
+ };
+ };
+
+ gsbi6: gsbi at 16500000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+ spi6: spi at 16580000 {
+ status = "ok";
+
+ pinctrl-0 = <&spi6_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+
+ spi-nor at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ };
+ };
+ };
+
+ sata-phy at 1b400000 {
+ status = "ok";
+ };
+
+ sata at 29000000 {
+ ports-implemented = <0x1>;
+ status = "ok";
+ };
+
+ phy at 100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy at 100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy at 110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy at 110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30 at 0 {
+ status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ usb30 at 1 {
+ status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+ };
+
+ pcie0: pci at 1b500000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie1: pci at 1b700000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ nand at 1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata at 0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL at c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV at 1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art at 1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ artbak: art at 1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel at 1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0200000>;
+ };
+
+ ubi at 1680000 {
+ label = "ubi";
+ reg = <0x1680000 0x1E00000>;
+ };
+
+ netgear at 3480000 {
+ label = "netgear";
+ reg = <0x3480000 0x4480000>;
+ read-only;
+ };
+
+ reserve at 7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+
+ firmware at 1480000 {
+ label = "firmware";
+ reg = <0x1480000 0x2000000>;
+ };
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+
+ phy0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ qca,ar8327-vlans = <
+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
+ 0x2 0x21 /* VLAN2 Ports 0/5 */
+ >;
+ };
+
+ phy4: ethernet-phy at 4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+ };
+
+ gmac1: ethernet at 37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&art 6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet at 37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ mtd-mac-address = <&art 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ rpm at 108000 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ power_white: power_white {
+ label = "r7800:white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ power_amber: power_amber {
+ label = "r7800:amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "r7800:white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "r7800:amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb1 {
+ label = "r7800:white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "r7800:white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "r7800:white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "r7800:white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "r7800:white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
new file mode 100644
index 0000000..22b5338
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-ipq8065.dtsi"
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065.dtsi
new file mode 100644
index 0000000..b3ccb2e
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -0,0 +1,153 @@
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8065";
+ compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+ qcom,pvs {
+ qcom,pvs-format-a;
+ qcom,speed0-pvs0-bin-v0 =
+ < 1725000000 1262500 >,
+ < 1400000000 1175000 >,
+ < 1000000000 1100000 >,
+ < 800000000 1050000 >,
+ < 600000000 1000000 >,
+ < 384000000 975000 >;
+ qcom,speed0-pvs1-bin-v0 =
+ < 1725000000 1225000 >,
+ < 1400000000 1150000 >,
+ < 1000000000 1075000 >,
+ < 800000000 1025000 >,
+ < 600000000 975000 >,
+ < 384000000 950000 >;
+ qcom,speed0-pvs2-bin-v0 =
+ < 1725000000 1200000 >,
+ < 1400000000 1125000 >,
+ < 1000000000 1050000 >,
+ < 800000000 1000000 >,
+ < 600000000 950000 >,
+ < 384000000 925000 >;
+ qcom,speed0-pvs3-bin-v0 =
+ < 1725000000 1175000 >,
+ < 1400000000 1100000 >,
+ < 1000000000 1025000 >,
+ < 800000000 975000 >,
+ < 600000000 925000 >,
+ < 384000000 900000 >;
+ qcom,speed0-pvs4-bin-v0 =
+ < 1725000000 1150000 >,
+ < 1400000000 1075000 >,
+ < 1000000000 1000000 >,
+ < 800000000 950000 >,
+ < 600000000 900000 >,
+ < 384000000 875000 >;
+ qcom,speed0-pvs5-bin-v0 =
+ < 1725000000 1100000 >,
+ < 1400000000 1025000 >,
+ < 1000000000 950000 >,
+ < 800000000 900000 >,
+ < 600000000 850000 >,
+ < 384000000 825000 >;
+ qcom,speed0-pvs6-bin-v0 =
+ < 1725000000 1050000 >,
+ < 1400000000 975000 >,
+ < 1000000000 900000 >,
+ < 800000000 850000 >,
+ < 600000000 800000 >,
+ < 384000000 775000 >;
+ };
+
+ soc: soc {
+
+ rpm at 108000 {
+
+ regulators {
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+ };
+ };
+ };
+
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdcc1bam:dma at 12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <0 98 0>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc3bam:dma at 12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <0 96 0>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc at 12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc3: sdcc at 12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ #mmc-ddr-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+ };
+ };
+};
diff --git a/target/linux/ipq806x/patches-4.9/999-dts.patch b/target/linux/ipq806x/patches-4.9/999-dts.patch
index abbaad5..ff970ea 100644
--- a/target/linux/ipq806x/patches-4.9/999-dts.patch
+++ b/target/linux/ipq806x/patches-4.9/999-dts.patch
@@ -1,58 +1,8 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -573,92 +573,61 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
- omap4-var-stk-om44.dtb
- dtb-$(CONFIG_SOC_AM43XX) += \
- am43x-epos-evm.dtb \
-- am437x-cm-t43.dtb \
-- am437x-gp-evm.dtb \
-+ am437x-sk-evm.dtb \
- am437x-idk-evm.dtb \
-- am437x-sbc-t43.dtb \
-- am437x-sk-evm.dtb
-+ am437x-gp-evm.dtb
- dtb-$(CONFIG_SOC_OMAP5) += \
- omap5-cm-t54.dtb \
- omap5-igep0050.dtb \
- omap5-sbc-t54.dtb \
- omap5-uevm.dtb
- dtb-$(CONFIG_SOC_DRA7XX) += \
-- am57xx-beagle-x15.dtb \
-- am57xx-beagle-x15-revb1.dtb \
-- am57xx-cl-som-am57x.dtb \
-- am57xx-sbc-am57x.dtb \
-- am572x-idk.dtb \
- dra7-evm.dtb \
-- dra72-evm.dtb \
-- dra72-evm-revc.dtb
-+ am57xx-beagle-x15.dtb \
-+ dra72-evm.dtb
- dtb-$(CONFIG_ARCH_ORION5X) += \
-- orion5x-kuroboxpro.dtb \
- orion5x-lacie-d2-network.dtb \
- orion5x-lacie-ethernet-disk-mini-v2.dtb \
-- orion5x-linkstation-lsgl.dtb \
- orion5x-linkstation-lswtgl.dtb \
- orion5x-lswsgl.dtb \
- orion5x-maxtor-shared-storage-2.dtb \
-- orion5x-netgear-wnr854t.dtb \
- orion5x-rd88f5182-nas.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += \
- prima2-evb.dtb
--dtb-$(CONFIG_ARCH_OXNAS) += \
-- wd-mbwe.dtb
- dtb-$(CONFIG_ARCH_QCOM) += \
-- qcom-apq8060-dragonboard.dtb \
-- qcom-apq8064-arrow-sd-600eval.dtb \
- qcom-apq8064-cm-qs600.dtb \
- qcom-apq8064-ifc6410.dtb \
-- qcom-apq8064-sony-xperia-yuga.dtb \
-- qcom-apq8064-asus-nexus7-flo.dtb \
- qcom-apq8074-dragonboard.dtb \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
-- qcom-ipq4019-ap.dk01.1-c1.dtb \
-- qcom-ipq4019-ap.dk04.1-c1.dtb \
+@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
@@ -64,83 +14,10 @@
+ qcom-ipq8065-r7800.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
-- qcom-msm8974-lge-nexus5-hammerhead.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
- dtb-$(CONFIG_ARCH_REALVIEW) += \
-- arm-realview-pb1176.dtb \
-- arm-realview-pb11mp.dtb \
-- arm-realview-eb.dtb \
-- arm-realview-eb-bbrevd.dtb \
-- arm-realview-eb-11mp.dtb \
-- arm-realview-eb-11mp-bbrevd.dtb \
-- arm-realview-eb-11mp-ctrevb.dtb \
-- arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-- arm-realview-eb-a9mp.dtb \
-- arm-realview-eb-a9mp-bbrevd.dtb \
-- arm-realview-pba8.dtb \
-- arm-realview-pbx-a9.dtb
-+ arm-realview-pb1176.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-- rk3036-evb.dtb \
-- rk3036-kylin.dtb \
- rk3066a-bqcurie2.dtb \
- rk3066a-marsboard.dtb \
- rk3066a-rayeager.dtb \
- rk3188-radxarock.dtb \
-- rk3228-evb.dtb \
-- rk3229-evb.dtb \
- rk3288-evb-act8846.dtb \
- rk3288-evb-rk808.dtb \
-- rk3288-fennec.dtb \
- rk3288-firefly-beta.dtb \
- rk3288-firefly.dtb \
-- rk3288-firefly-reload.dtb \
-- rk3288-miqi.dtb \
- rk3288-popmetal.dtb \
- rk3288-r89.dtb \
- rk3288-rock2-square.dtb \
-- rk3288-veyron-brain.dtb \
- rk3288-veyron-jaq.dtb \
- rk3288-veyron-jerry.dtb \
-- rk3288-veyron-mickey.dtb \
- rk3288-veyron-minnie.dtb \
- rk3288-veyron-pinky.dtb \
- rk3288-veyron-speedy.dtb
+ qcom-msm8974-lge-nexus5-hammerhead.dtb \
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -4,12 +4,9 @@
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-- aliases {
-- serial0 = &gsbi4_serial;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
- };
-
- reserved-memory {
-@@ -22,6 +19,15 @@
- };
- };
-
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
- soc {
- pinmux at 800000 {
- i2c4_pins: i2c4_pinmux {
-@@ -60,6 +66,25 @@
+@@ -60,6 +60,25 @@
bias-bus-hold;
};
};
@@ -166,7 +43,7 @@
};
gsbi at 16300000 {
-@@ -69,14 +94,12 @@
+@@ -69,14 +88,12 @@
status = "ok";
};
@@ -187,7 +64,7 @@
};
gsbi5: gsbi at 1a200000 {
-@@ -99,15 +122,7 @@
+@@ -99,15 +116,7 @@
spi-max-frequency = <50000000>;
reg = <0>;
@@ -204,11 +81,7 @@
};
};
};
-@@ -117,23 +132,105 @@
- };
-
- sata at 29000000 {
-- ports-implemented = <0x1>;
+@@ -121,19 +130,102 @@
status = "ok";
};
@@ -316,4731 +189,807 @@
};
};
};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
-@@ -0,0 +1,501 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "TP-Link Archer C2600";
-+ compatible = "tplink,c2600", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -1,11 +1,13 @@
+ /dts-v1/;
+
+ #include "skeleton.dtsi"
+-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
++#include <dt-bindings/mfd/qcom-rpm.h>
+ #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+ #include <dt-bindings/soc/qcom,gsbi.h>
++#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/gpio/gpio.h>
+
+ / {
+ model = "Qualcomm IPQ8064";
+@@ -16,7 +18,7 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- cpu at 0 {
++ cpu0: cpu at 0 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+@@ -24,9 +26,18 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
++ clocks = <&kraitcc 0>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ cpu-supply = <&smb208_s2a>;
++ voltage-tolerance = <5>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
+ };
+
+- cpu at 1 {
++ cpu1: cpu at 1 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+@@ -34,11 +45,120 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
++ clocks = <&kraitcc 1>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ cpu-supply = <&smb208_s2b>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
+ };
-+ };
+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
++ qcom,l2 {
++ qcom,l2-rates = <384000000 1000000000 1200000000>;
++ };
+
-+ led-boot = &power;
-+ led-failsafe = &general;
-+ led-running = &power;
-+ led-upgrade = &general;
++ idle-states {
++ CPU_SPC: spc {
++ compatible = "qcom,idle-state-spc",
++ "arm,idle-state";
++ entry-latency-us = <400>;
++ exit-latency-us = <900>;
++ min-residency-us = <3000>;
++ };
++ };
+ };
+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
++ thermal-zones {
++ cpu-thermal0 {
++ polling-delay-passive = <250>;
++ polling-delay = <1000>;
+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio16", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
++ thermal-sensors = <&gcc 5>;
++ coefficients = <1132 0>;
+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
++ trips {
++ cpu_alert0: trip0 {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
-+ "gpio53", "gpio66";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
++ cpu_crit0: trip1 {
++ temperature = <110000>;
++ hysteresis = <2000>;
++ type = "critical";
+ };
+ };
++ };
+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
++ cpu-thermal1 {
++ polling-delay-passive = <250>;
++ polling-delay = <1000>;
+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
++ thermal-sensors = <&gcc 6>;
++ coefficients = <1132 0>;
+
-+ cs {
-+ pins = "gpio20";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
++ trips {
++ cpu_alert1: trip0 {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
++ cpu_crit1: trip1 {
++ temperature = <110000>;
++ hysteresis = <2000>;
++ type = "critical";
+ };
+ };
++ };
+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
++ cpu-thermal2 {
++ polling-delay-passive = <250>;
++ polling-delay = <1000>;
+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
++ thermal-sensors = <&gcc 7>;
++ coefficients = <1199 0>;
+
-+ usb0_pwr_en_pin: usb0_pwr_en_pin {
-+ mux {
-+ pins = "gpio25";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ output-high;
++ trips {
++ cpu_alert2: trip0 {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
+ };
-+ };
-+
-+ usb1_pwr_en_pin: usb1_pwr_en_pin {
-+ mux {
-+ pins = "gpio23";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ output-high;
++ cpu_crit2: trip1 {
++ temperature = <110000>;
++ hysteresis = <2000>;
++ type = "critical";
+ };
+ };
+ };
+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
++ cpu-thermal3 {
++ polling-delay-passive = <250>;
++ polling-delay = <1000>;
+
-+ gsbi5: gsbi at 1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
++ thermal-sensors = <&gcc 8>;
++ coefficients = <1132 0>;
+
-+ spi5: spi at 1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80 at 0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ SBL1 at 0 {
-+ label = "SBL1";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+
-+ MIBIB at 20000 {
-+ label = "MIBIB";
-+ reg = <0x20000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL2 at 40000 {
-+ label = "SBL2";
-+ reg = <0x40000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL3 at 60000 {
-+ label = "SBL3";
-+ reg = <0x60000 0x30000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG at 90000 {
-+ label = "DDRCONFIG";
-+ reg = <0x90000 0x10000>;
-+ read-only;
-+ };
-+
-+ SSD at a0000 {
-+ label = "SSD";
-+ reg = <0xa0000 0x10000>;
-+ read-only;
-+ };
-+
-+ TZ at b0000 {
-+ label = "TZ";
-+ reg = <0xb0000 0x30000>;
-+ read-only;
-+ };
-+
-+ RPM at e0000 {
-+ label = "RPM";
-+ reg = <0xe0000 0x20000>;
-+ read-only;
-+ };
-+
-+ fs-uboot at 100000 {
-+ label = "fs-uboot";
-+ reg = <0x100000 0x70000>;
-+ read-only;
-+ };
-+
-+ uboot-env at 170000 {
-+ label = "uboot-env";
-+ reg = <0x170000 0x40000>;
-+ read-only;
-+ };
-+
-+ radio at 1b0000 {
-+ label = "radio";
-+ reg = <0x1b0000 0x40000>;
-+ read-only;
-+ };
-+
-+ os-image at 1f0000 {
-+ label = "os-image";
-+ reg = <0x1f0000 0x200000>;
-+ };
-+
-+ rootfs at 3f0000 {
-+ label = "rootfs";
-+ reg = <0x3f0000 0x1b00000>;
-+ };
-+
-+ defaultmac: default-mac at 1ef0000 {
-+ label = "default-mac";
-+ reg = <0x1ef0000 0x00200>;
-+ read-only;
-+ };
-+
-+ pin at 1ef0200 {
-+ label = "pin";
-+ reg = <0x1ef0200 0x00200>;
-+ read-only;
-+ };
-+
-+ product-info at 1ef0400 {
-+ label = "product-info";
-+ reg = <0x1ef0400 0x0fc00>;
-+ read-only;
-+ };
-+
-+ partition-table at 1f00000 {
-+ label = "partition-table";
-+ reg = <0x1f00000 0x10000>;
-+ read-only;
-+ };
-+
-+ soft-version at 1f10000 {
-+ label = "soft-version";
-+ reg = <0x1f10000 0x10000>;
-+ read-only;
-+ };
-+
-+ support-list at 1f20000 {
-+ label = "support-list";
-+ reg = <0x1f20000 0x10000>;
-+ read-only;
-+ };
-+
-+ profile at 1f30000 {
-+ label = "profile";
-+ reg = <0x1f30000 0x10000>;
-+ read-only;
-+ };
-+
-+ default-config at 1f40000 {
-+ label = "default-config";
-+ reg = <0x1f40000 0x10000>;
-+ read-only;
-+ };
-+
-+ user-config at 1f50000 {
-+ label = "user-config";
-+ reg = <0x1f50000 0x40000>;
-+ read-only;
-+ };
-+
-+ qos-db at 1f90000 {
-+ label = "qos-db";
-+ reg = <0x1f90000 0x40000>;
-+ read-only;
-+ };
-+
-+ usb-config at 1fd0000 {
-+ label = "usb-config";
-+ reg = <0x1fd0000 0x10000>;
-+ read-only;
-+ };
-+
-+ log at 1fe0000 {
-+ label = "log";
-+ reg = <0x1fe0000 0x20000>;
-+ read-only;
-+ };
++ trips {
++ cpu_alert3: trip0 {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
++ };
++ cpu_crit3: trip1 {
++ temperature = <110000>;
++ hysteresis = <2000>;
++ type = "critical";
+ };
+ };
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
+ };
+ };
+
+@@ -57,7 +177,7 @@
+ no-map;
+ };
+
+- smem at 41000000 {
++ smem: smem at 41000000 {
+ reg = <0x41000000 0x200000>;
+ no-map;
+ };
+@@ -67,13 +187,13 @@
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+- clock-frequency = <19200000>;
++ clock-frequency = <25000000>;
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+- clock-frequency = <27000000>;
++ clock-frequency = <25000000>;
+ };
+
+ sleep_clk: sleep_clk {
+@@ -83,6 +203,46 @@
+ };
+ };
+
++ kraitcc: clock-controller {
++ compatible = "qcom,krait-cc-v1";
++ #clock-cells = <1>;
++ };
+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
++ qcom,pvs {
++ qcom,pvs-format-a;
++ qcom,speed0-pvs0-bin-v0 =
++ < 1400000000 1250000 >,
++ < 1200000000 1200000 >,
++ < 1000000000 1150000 >,
++ < 800000000 1100000 >,
++ < 600000000 1050000 >,
++ < 384000000 1000000 >;
+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pin>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pin>;
-+ pinctrl-names = "default";
-+ };
++ qcom,speed0-pvs1-bin-v0 =
++ < 1400000000 1175000 >,
++ < 1200000000 1125000 >,
++ < 1000000000 1075000 >,
++ < 800000000 1025000 >,
++ < 600000000 975000 >,
++ < 384000000 925000 >;
+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
++ qcom,speed0-pvs2-bin-v0 =
++ < 1400000000 1125000 >,
++ < 1200000000 1075000 >,
++ < 1000000000 1025000 >,
++ < 800000000 995000 >,
++ < 600000000 925000 >,
++ < 384000000 875000 >;
+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
++ qcom,speed0-pvs3-bin-v0 =
++ < 1400000000 1050000 >,
++ < 1200000000 1000000 >,
++ < 1000000000 950000 >,
++ < 800000000 900000 >,
++ < 600000000 850000 >,
++ < 384000000 800000 >;
++ };
+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+@@ -104,6 +264,85 @@
+ reg-names = "lpass-lpaif";
+ };
+
++ qfprom: qfprom at 700000 {
++ compatible = "qcom,qfprom", "syscon";
++ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+ mtd-mac-address-increment = <1>;
++ #size-cells = <1>;
++ ranges;
+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
++ tsens_calib: calib {
++ reg = <0x400 0x10>;
+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
++ tsens_backup: backup_calib {
++ reg = <0x410 0x10>;
+ };
+ };
+
+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
++ compatible = "qcom,rpm-ipq8064";
++ reg = <0x108000 0x1000>;
++ qcom,ipc = <&l2cc 0x8 2>;
+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
++ interrupts = <0 19 0>,
++ <0 21 0>,
++ <0 22 0>;
++ interrupt-names = "ack",
++ "err",
++ "wakeup";
+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
++ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
++ clock-names = "ram";
+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
++ #address-cells = <1>;
++ #size-cells = <0>;
+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
++ rpmcc: clock-controller {
++ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
++ #clock-cells = <1>;
++ };
+
-+ ledswitch {
-+ label = "ledswitch";
-+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_LIGHTS_TOGGLE>;
-+ };
-+ };
++ regulators {
++ compatible = "qcom,rpm-smb208-regulators";
+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
+
-+ lan {
-+ label = "c2600:white:lan";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-+ };
++ qcom,switch-mode-frequency = <1200000>;
+
-+ usb4 {
-+ label = "c2600:white:usb_4";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
++ };
+
-+ usb2 {
-+ label = "c2600:white:usb_2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
+
-+ wps {
-+ label = "c2600:white:wps";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
++ qcom,switch-mode-frequency = <1200000>;
++ };
+
-+ wan_amber {
-+ label = "c2600:amber:wan";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-+ };
++ smb208_s2a: s2a {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
+
-+ wan_white {
-+ label = "c2600:white:wan";
-+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-+ };
++ qcom,switch-mode-frequency = <1200000>;
++ };
+
-+ power: power {
-+ label = "c2600:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
++ smb208_s2b: s2b {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
+
-+ general: general {
-+ label = "c2600:white:general";
-+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
-@@ -0,0 +1,406 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
+
-+/ {
-+ model = "Netgear Nighthawk X4 D7800";
-+ compatible = "netgear,d7800", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0xe000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
++ rng at 1a500000 {
++ compatible = "qcom,prng";
++ reg = <0x1a500000 0x200>;
++ clocks = <&gcc PRNG_CLK>;
++ clock-names = "core";
+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
+ qcom_pinmux: pinmux at 800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+@@ -113,6 +352,34 @@
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0x4>;
+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
++ pcie0_pins: pcie0_pinmux {
+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
++ pins = "gpio3";
++ function = "pcie1_rst";
+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
-+ led_pins: led_pins {
++ pcie1_pins: pcie1_pinmux {
+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
++ pins = "gpio48";
++ function = "pcie2_rst";
+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
++ pcie2_pins: pcie2_pinmux {
+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
++ pins = "gpio63";
++ function = "pcie3_rst";
++ drive-strength = <2>;
+ bias-disable;
++ output-low;
+ };
+ };
+ };
+
+ intc: interrupt-controller at 2000000 {
+@@ -124,8 +391,7 @@
+ };
+
+ timer at 200a000 {
+- compatible = "qcom,kpss-timer",
+- "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
++ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>,
+@@ -142,25 +408,44 @@
+ acc0: clock-controller at 2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
++ clock-output-names = "acpu0_aux";
+ };
+
+ acc1: clock-controller at 2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
++ clock-output-names = "acpu1_aux";
+ };
+
++ l2cc: clock-controller at 2011000 {
++ compatible = "qcom,kpss-gcc", "syscon";
++ reg = <0x2011000 0x1000>;
++ clock-output-names = "acpu_l2_aux";
++ };
+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ status = "ok";
+ saw0: regulator at 2089000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "syscon";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator at 2099000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "syscon";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
++ saw_l2: regulator at 02012000 {
++ compatible = "qcom,saw2", "syscon";
++ reg = <0x02012000 0x1000>;
++ regulator;
+ };
+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
++ sic_non_secure: sic-non-secure at 12100000 {
++ compatible = "syscon";
++ reg = <0x12100000 0x10000>;
+ };
+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
+ gsbi2: gsbi at 12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
+@@ -328,8 +613,12 @@
+ gcc: clock-controller at 900000 {
+ compatible = "qcom,gcc-ipq8064";
+ reg = <0x00900000 0x4000>;
++ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
++ nvmem-cell-names = "calib", "calib_backup";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
++ #power-domain-cells = <1>;
++ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr: syscon at 1a400000 {
+@@ -344,10 +633,259 @@
+ #reset-cells = <1>;
+ };
+
++ sfpb_mutex_block: syscon at 1200600 {
++ compatible = "syscon";
++ reg = <0x01200600 0x100>;
+ };
+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
++ hs_phy_1: phy at 100f8800 {
++ compatible = "qcom,dwc3-hs-usb-phy";
++ reg = <0x100f8800 0x30>;
++ clocks = <&gcc USB30_1_UTMI_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
++ status = "disabled";
+ };
+
-+ usb30 at 0 {
-+ status = "ok";
++ ss_phy_1: phy at 100f8830 {
++ compatible = "qcom,dwc3-ss-usb-phy";
++ reg = <0x100f8830 0x30>;
++ clocks = <&gcc USB30_1_MASTER_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
++ status = "disabled";
+ };
+
-+ usb30 at 1 {
-+ status = "ok";
++ hs_phy_0: phy at 110f8800 {
++ compatible = "qcom,dwc3-hs-usb-phy";
++ reg = <0x110f8800 0x30>;
++ clocks = <&gcc USB30_0_UTMI_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
++ status = "disabled";
+ };
+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
++ ss_phy_0: phy at 110f8830 {
++ compatible = "qcom,dwc3-ss-usb-phy";
++ reg = <0x110f8830 0x30>;
++ clocks = <&gcc USB30_0_MASTER_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
++ status = "disabled";
+ };
+
-+ nand at 1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
++ usb3_0: usb30 at 0 {
++ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
++ clocks = <&gcc USB30_0_MASTER_CLK>;
++ clock-names = "core";
+
-+ qcadata at 0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL at c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV at 1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art at 1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art at 1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel at 1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi at 1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
++ syscon-tcsr = <&tcsr 0xb0 1>;
+
-+ netgear at 3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
++ ranges;
+
-+ reserve at 7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
++ status = "disabled";
+
-+ firmware at 1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
++ dwc3 at 11000000 {
++ compatible = "snps,dwc3";
++ reg = <0x11000000 0xcd00>;
++ interrupts = <0 110 0x4>;
++ phys = <&hs_phy_0>, <&ss_phy_0>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ snps,dis_u3_susphy_quirk;
+ };
+ };
+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
++ usb3_1: usb30 at 1 {
++ compatible = "qcom,dwc3";
+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
++ #size-cells = <1>;
++ clocks = <&gcc USB30_1_MASTER_CLK>;
++ clock-names = "core";
+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
++ syscon-tcsr = <&tcsr 0xb0 0>;
+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
++ ranges;
++
++ status = "disabled";
++
++ dwc3 at 10000000 {
++ compatible = "snps,dwc3";
++ reg = <0x10000000 0xcd00>;
++ interrupts = <0 205 0x4>;
++ phys = <&hs_phy_1>, <&ss_phy_1>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ snps,dis_u3_susphy_quirk;
+ };
+ };
+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy4>;
-+ qcom,id = <1>;
++ pcie0: pci at 1b500000 {
++ compatible = "qcom,pcie-v0";
++ reg = <0x1b500000 0x1000
++ 0x1b502000 0x80
++ 0x1b600000 0x100
++ 0x0ff00000 0x100000>;
++ reg-names = "dbi", "elbi", "parf", "config";
++ device_type = "pci";
++ linux,pci-domain = <0>;
++ bus-range = <0x00 0xff>;
++ num-lanes = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
++ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
++ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
-+ mtd-mac-address = <&art 6>;
-+ };
++ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
++ interrupt-names = "msi";
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 0x7>;
++ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
++ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
++ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
++ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
++ clocks = <&gcc PCIE_A_CLK>,
++ <&gcc PCIE_H_CLK>,
++ <&gcc PCIE_PHY_CLK>,
++ <&gcc PCIE_AUX_CLK>,
++ <&gcc PCIE_ALT_REF_CLK>;
++ clock-names = "core", "iface", "phy", "aux", "ref";
+
-+ mtd-mac-address = <&art 0>;
++ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
++ assigned-clock-rates = <100000000>;
+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
++ resets = <&gcc PCIE_ACLK_RESET>,
++ <&gcc PCIE_HCLK_RESET>,
++ <&gcc PCIE_POR_RESET>,
++ <&gcc PCIE_PCI_RESET>,
++ <&gcc PCIE_PHY_RESET>,
++ <&gcc PCIE_EXT_RESET>;
++ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
++ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
++ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "d7800:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "d7800:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_amber: power_amber {
-+ label = "d7800:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_white {
-+ label = "d7800:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "d7800:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "d7800:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "d7800:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_white: power_white {
-+ label = "d7800:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "d7800:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -0,0 +1,236 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+/ {
-+ model = "Qualcomm IPQ8064/DB149";
-+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ alias {
-+ serial0 = &uart2;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ i2c4_pins: i2c4_pinmux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ bias-disable;
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii0_pins: rgmii0_pins {
-+ mux {
-+ pins = "gpio2", "gpio66";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi2: gsbi at 12480000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ uart2: serial at 12490000 {
-+ status = "ok";
-+ };
-+ };
-+
-+ gsbi5: gsbi at 1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi at 1a280000 {
-+ status = "ok";
-+ spi-max-frequency = <50000000>;
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 0>;
-+
-+ flash: m25p80 at 0 {
-+ compatible = "s25fl256s1";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+ m25p,fast-read;
-+
-+ partition at 0 {
-+ label = "lowlevel_init";
-+ reg = <0x0 0x1b0000>;
-+ };
-+
-+ partition at 1 {
-+ label = "u-boot";
-+ reg = <0x1b0000 0x80000>;
-+ };
-+
-+ partition at 2 {
-+ label = "u-boot-env";
-+ reg = <0x230000 0x40000>;
-+ };
-+
-+ partition at 3 {
-+ label = "caldata";
-+ reg = <0x270000 0x40000>;
-+ };
-+
-+ partition at 4 {
-+ label = "firmware";
-+ reg = <0x2b0000 0x1d50000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ status = "ok";
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ };
-+
-+ pcie2: pci at 1b900000 {
-+ status = "ok";
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+
-+ phy6: ethernet-phy at 6 {
-+ device_type = "ethernet-phy";
-+ reg = <6>;
-+ };
-+
-+ phy7: ethernet-phy at 7 {
-+ device_type = "ethernet-phy";
-+ reg = <7>;
-+ };
-+ };
-+
-+ gmac0: ethernet at 37000000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <0>;
-+ phy-handle = <&phy4>;
-+
-+ pinctrl-0 = <&rgmii0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ phy-handle = <&phy6>;
-+ };
-+
-+ gmac3: ethernet at 37600000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <3>;
-+ phy-handle = <&phy7>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -1,11 +1,13 @@
- /dts-v1/;
-
- #include "skeleton.dtsi"
--#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
- #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
-+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/gpio/gpio.h>
-
- / {
- model = "Qualcomm IPQ8064";
-@@ -16,7 +18,7 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-- cpu at 0 {
-+ cpu0: cpu at 0 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
-@@ -24,9 +26,18 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
-+ clocks = <&kraitcc 0>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2a>;
-+ voltage-tolerance = <5>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
-+ cpu-idle-states = <&CPU_SPC>;
- };
-
-- cpu at 1 {
-+ cpu1: cpu at 1 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
-@@ -34,11 +45,120 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
-+ clocks = <&kraitcc 1>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2b>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
-+ cpu-idle-states = <&CPU_SPC>;
- };
-
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
-+ };
-+
-+ qcom,l2 {
-+ qcom,l2-rates = <384000000 1000000000 1200000000>;
-+ };
-+
-+ idle-states {
-+ CPU_SPC: spc {
-+ compatible = "qcom,idle-state-spc",
-+ "arm,idle-state";
-+ entry-latency-us = <400>;
-+ exit-latency-us = <900>;
-+ min-residency-us = <3000>;
-+ };
-+ };
-+ };
-+
-+ thermal-zones {
-+ cpu-thermal0 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 5>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert0: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit0: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal1 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 6>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert1: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit1: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal2 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 7>;
-+ coefficients = <1199 0>;
-+
-+ trips {
-+ cpu_alert2: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit2: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal3 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 8>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert3: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit3: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
- };
- };
-
-@@ -57,7 +177,7 @@
- no-map;
- };
-
-- smem at 41000000 {
-+ smem: smem at 41000000 {
- reg = <0x41000000 0x200000>;
- no-map;
- };
-@@ -67,13 +187,13 @@
- cxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
-- clock-frequency = <19200000>;
-+ clock-frequency = <25000000>;
- };
-
- pxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
-- clock-frequency = <27000000>;
-+ clock-frequency = <25000000>;
- };
-
- sleep_clk: sleep_clk {
-@@ -83,6 +203,46 @@
- };
- };
-
-+ kraitcc: clock-controller {
-+ compatible = "qcom,krait-cc-v1";
-+ #clock-cells = <1>;
-+ };
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 1400000000 1250000 >,
-+ < 1200000000 1200000 >,
-+ < 1000000000 1150000 >,
-+ < 800000000 1100000 >,
-+ < 600000000 1050000 >,
-+ < 384000000 1000000 >;
-+
-+ qcom,speed0-pvs1-bin-v0 =
-+ < 1400000000 1175000 >,
-+ < 1200000000 1125000 >,
-+ < 1000000000 1075000 >,
-+ < 800000000 1025000 >,
-+ < 600000000 975000 >,
-+ < 384000000 925000 >;
-+
-+ qcom,speed0-pvs2-bin-v0 =
-+ < 1400000000 1125000 >,
-+ < 1200000000 1075000 >,
-+ < 1000000000 1025000 >,
-+ < 800000000 995000 >,
-+ < 600000000 925000 >,
-+ < 384000000 875000 >;
-+
-+ qcom,speed0-pvs3-bin-v0 =
-+ < 1400000000 1050000 >,
-+ < 1200000000 1000000 >,
-+ < 1000000000 950000 >,
-+ < 800000000 900000 >,
-+ < 600000000 850000 >,
-+ < 384000000 800000 >;
-+ };
-+
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
-@@ -104,6 +264,85 @@
- reg-names = "lpass-lpaif";
- };
-
-+ qfprom: qfprom at 700000 {
-+ compatible = "qcom,qfprom", "syscon";
-+ reg = <0x00700000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ tsens_calib: calib {
-+ reg = <0x400 0x10>;
-+ };
-+ tsens_backup: backup_calib {
-+ reg = <0x410 0x10>;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ compatible = "qcom,rpm-ipq8064";
-+ reg = <0x108000 0x1000>;
-+ qcom,ipc = <&l2cc 0x8 2>;
-+
-+ interrupts = <0 19 0>,
-+ <0 21 0>,
-+ <0 22 0>;
-+ interrupt-names = "ack",
-+ "err",
-+ "wakeup";
-+
-+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-+ clock-names = "ram";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rpmcc: clock-controller {
-+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-+ #clock-cells = <1>;
-+ };
-+
-+ regulators {
-+ compatible = "qcom,rpm-smb208-regulators";
-+
-+ smb208_s1a: s1a {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+
-+ };
-+
-+ smb208_s1b: s1b {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+ };
-+ };
-+
-+ rng at 1a500000 {
-+ compatible = "qcom,prng";
-+ reg = <0x1a500000 0x200>;
-+ clocks = <&gcc PRNG_CLK>;
-+ clock-names = "core";
-+ };
-+
- qcom_pinmux: pinmux at 800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
-@@ -113,6 +352,34 @@
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0x4>;
-+
-+ pcie0_pins: pcie0_pinmux {
-+ mux {
-+ pins = "gpio3";
-+ function = "pcie1_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pcie1_pins: pcie1_pinmux {
-+ mux {
-+ pins = "gpio48";
-+ function = "pcie2_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pcie2_pins: pcie2_pinmux {
-+ mux {
-+ pins = "gpio63";
-+ function = "pcie3_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ output-low;
-+ };
-+ };
- };
-
- intc: interrupt-controller at 2000000 {
-@@ -124,8 +391,7 @@
- };
-
- timer at 200a000 {
-- compatible = "qcom,kpss-timer",
-- "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
-+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>,
-@@ -142,25 +408,44 @@
- acc0: clock-controller at 2088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu0_aux";
- };
-
- acc1: clock-controller at 2098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu1_aux";
- };
-
-+ l2cc: clock-controller at 2011000 {
-+ compatible = "qcom,kpss-gcc", "syscon";
-+ reg = <0x2011000 0x1000>;
-+ clock-output-names = "acpu_l2_aux";
-+ };
-+
- saw0: regulator at 2089000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "syscon";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw1: regulator at 2099000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "syscon";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
-+ saw_l2: regulator at 02012000 {
-+ compatible = "qcom,saw2", "syscon";
-+ reg = <0x02012000 0x1000>;
-+ regulator;
-+ };
-+
-+ sic_non_secure: sic-non-secure at 12100000 {
-+ compatible = "syscon";
-+ reg = <0x12100000 0x10000>;
-+ };
-+
- gsbi2: gsbi at 12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
-@@ -174,7 +459,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial at 12490000 {
-+ uart2: serial at 12490000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12490000 0x1000>,
- <0x12480000 0x1000>;
-@@ -212,7 +497,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- gsbi4_serial: serial at 16340000 {
-+ uart4: serial at 16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
-@@ -249,7 +534,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial at 1a240000 {
-+ uart5: serial at 1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
-@@ -328,8 +613,12 @@
- gcc: clock-controller at 900000 {
- compatible = "qcom,gcc-ipq8064";
- reg = <0x00900000 0x4000>;
-+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-+ nvmem-cell-names = "calib", "calib_backup";
- #clock-cells = <1>;
- #reset-cells = <1>;
-+ #power-domain-cells = <1>;
-+ #thermal-sensor-cells = <1>;
- };
-
- tcsr: syscon at 1a400000 {
-@@ -344,10 +633,259 @@
- #reset-cells = <1>;
- };
-
-+ sfpb_mutex_block: syscon at 1200600 {
-+ compatible = "syscon";
-+ reg = <0x01200600 0x100>;
-+ };
-+
-+ hs_phy_1: phy at 100f8800 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ reg = <0x100f8800 0x30>;
-+ clocks = <&gcc USB30_1_UTMI_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ ss_phy_1: phy at 100f8830 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ reg = <0x100f8830 0x30>;
-+ clocks = <&gcc USB30_1_MASTER_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ hs_phy_0: phy at 110f8800 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ reg = <0x110f8800 0x30>;
-+ clocks = <&gcc USB30_0_UTMI_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ ss_phy_0: phy at 110f8830 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ reg = <0x110f8830 0x30>;
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ usb3_0: usb30 at 0 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "core";
-+
-+ syscon-tcsr = <&tcsr 0xb0 1>;
-+
-+ ranges;
-+
-+ status = "disabled";
-+
-+ dwc3 at 11000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x11000000 0xcd00>;
-+ interrupts = <0 110 0x4>;
-+ phys = <&hs_phy_0>, <&ss_phy_0>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ snps,dis_u3_susphy_quirk;
-+ };
-+ };
-+
-+ usb3_1: usb30 at 1 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc USB30_1_MASTER_CLK>;
-+ clock-names = "core";
-+
-+ syscon-tcsr = <&tcsr 0xb0 0>;
-+
-+ ranges;
-+
-+ status = "disabled";
-+
-+ dwc3 at 10000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x10000000 0xcd00>;
-+ interrupts = <0 205 0x4>;
-+ phys = <&hs_phy_1>, <&ss_phy_1>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ snps,dis_u3_susphy_quirk;
-+ };
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b500000 0x1000
-+ 0x1b502000 0x80
-+ 0x1b600000 0x100
-+ 0x0ff00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <0>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_A_CLK>,
-+ <&gcc PCIE_H_CLK>,
-+ <&gcc PCIE_PHY_CLK>,
-+ <&gcc PCIE_AUX_CLK>,
-+ <&gcc PCIE_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-+
-+ resets = <&gcc PCIE_ACLK_RESET>,
-+ <&gcc PCIE_HCLK_RESET>,
-+ <&gcc PCIE_POR_RESET>,
-+ <&gcc PCIE_PCI_RESET>,
-+ <&gcc PCIE_PHY_RESET>,
-+ <&gcc PCIE_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-+
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b700000 0x1000
-+ 0x1b702000 0x80
-+ 0x1b800000 0x100
-+ 0x31f00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <1>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_1_A_CLK>,
-+ <&gcc PCIE_1_H_CLK>,
-+ <&gcc PCIE_1_PHY_CLK>,
-+ <&gcc PCIE_1_AUX_CLK>,
-+ <&gcc PCIE_1_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-+
-+ resets = <&gcc PCIE_1_ACLK_RESET>,
-+ <&gcc PCIE_1_HCLK_RESET>,
-+ <&gcc PCIE_1_POR_RESET>,
-+ <&gcc PCIE_1_PCI_RESET>,
-+ <&gcc PCIE_1_PHY_RESET>,
-+ <&gcc PCIE_1_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-+
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
-+
-+ pcie2: pci at 1b900000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b900000 0x1000
-+ 0x1b902000 0x80
-+ 0x1ba00000 0x100
-+ 0x35f00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <2>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_2_A_CLK>,
-+ <&gcc PCIE_2_H_CLK>,
-+ <&gcc PCIE_2_PHY_CLK>,
-+ <&gcc PCIE_2_AUX_CLK>,
-+ <&gcc PCIE_2_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-+
-+ resets = <&gcc PCIE_2_ACLK_RESET>,
-+ <&gcc PCIE_2_HCLK_RESET>,
-+ <&gcc PCIE_2_POR_RESET>,
-+ <&gcc PCIE_2_PCI_RESET>,
-+ <&gcc PCIE_2_PHY_RESET>,
-+ <&gcc PCIE_2_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-+
-+ pinctrl-0 = <&pcie2_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
-+
- adm_dma: dma at 18300000 {
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
-- interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
-+ interrupts = <0 170 0>;
- #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-@@ -365,7 +903,7 @@
- };
-
- nand at 1ac00000 {
-- compatible = "qcom,ipq806x-nand";
-+ compatible = "qcom,ebi2-nandc";
- reg = <0x1ac00000 0x800>;
-
- clocks = <&gcc EBI2_CLK>,
-@@ -380,5 +918,103 @@
- status = "disabled";
- };
-
-+ nss_common: syscon at 03000000 {
-+ compatible = "syscon";
-+ reg = <0x03000000 0x0000FFFF>;
-+ };
-+
-+ qsgmii_csr: syscon at 1bb00000 {
-+ compatible = "syscon";
-+ reg = <0x1bb00000 0x000001FF>;
-+ };
-+
-+ gmac0: ethernet at 37000000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37000000 0x200000>;
-+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE1_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE1_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37200000 0x200000>;
-+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE2_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE2_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37400000 0x200000>;
-+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE3_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE3_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac3: ethernet at 37600000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37600000 0x200000>;
-+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE4_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE4_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+ };
-+
-+ sfpb_mutex: sfpb-mutex {
-+ compatible = "qcom,sfpb-mutex";
-+ syscon = <&sfpb_mutex_block 4 4>;
-+
-+ #hwlock-cells = <1>;
-+ };
-+
-+ smem {
-+ compatible = "qcom,smem";
-+ memory-region = <&smem>;
-+ hwlocks = <&sfpb_mutex 3>;
- };
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
-@@ -0,0 +1,399 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Linksys EA8500 WiFi Router";
-+ compatible = "linksys,ea8500", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyMSM0,115200n8";
-+ linux,stdout-path = "serial0:115200n8";
-+ append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio65", "gpio67", "gpio68";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio6", "gpio53", "gpio54";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ status = "ok";
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie2: pci at 1b900000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ nand at 1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ SBL1 at 0 {
-+ label = "SBL1";
-+ reg = <0x0000000 0x0040000>;
-+ read-only;
-+ };
-+
-+ MIBIB at 40000 {
-+ label = "MIBIB";
-+ reg = <0x0040000 0x0140000>;
-+ read-only;
-+ };
-+
-+ SBL2 at 180000 {
-+ label = "SBL2";
-+ reg = <0x0180000 0x0140000>;
-+ read-only;
-+ };
-+
-+ SBL3 at 2c0000 {
-+ label = "SBL3";
-+ reg = <0x02c0000 0x0280000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG at 540000 {
-+ label = "DDRCONFIG";
-+ reg = <0x0540000 0x0120000>;
-+ read-only;
-+ };
-+
-+ SSD at 660000 {
-+ label = "SSD";
-+ reg = <0x0660000 0x0120000>;
-+ read-only;
-+ };
-+
-+ TZ at 780000 {
-+ label = "TZ";
-+ reg = <0x0780000 0x0280000>;
-+ read-only;
-+ };
-+
-+ RPM at a00000 {
-+ label = "RPM";
-+ reg = <0x0a00000 0x0280000>;
-+ read-only;
-+ };
-+
-+ art: art at c80000 {
-+ label = "art";
-+ reg = <0x0c80000 0x0140000>;
-+ read-only;
-+ };
-+
-+ APPSBL at dc0000 {
-+ label = "APPSBL";
-+ reg = <0x0dc0000 0x0100000>;
-+ read-only;
-+ };
-+
-+ u_env at ec0000 {
-+ label = "u_env";
-+ reg = <0x0ec0000 0x0040000>;
-+ };
-+
-+ s_env at f00000 {
-+ label = "s_env";
-+ reg = <0x0f00000 0x0040000>;
-+ };
-+
-+ devinfo at f40000 {
-+ label = "devinfo";
-+ reg = <0x0f40000 0x0040000>;
-+ };
-+
-+ linux at f80000 {
-+ label = "kernel1";
-+ reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
-+ };
-+
-+ rootfs at 1280000 {
-+ label = "rootfs1";
-+ reg = <0x1280000 0x2500000>;
-+ };
-+
-+ linux2 at 3780000 {
-+ label = "kernel2";
-+ reg = <0x3780000 0x2800000>;
-+ };
-+
-+ rootfs2 at 3a80000 {
-+ label = "rootfs2";
-+ reg = <0x3a80000 0x2500000>;
-+ };
-+
-+ syscfg at 5f80000 {
-+ label = "syscfg";
-+ reg = <0x5f80000 0x2080000>;
-+ };
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ //lan
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ adm_dma: dma at 18300000 {
-+ status = "ok";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART >;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ wps {
-+ label = "ea8500:green:wps";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "ea8500:white:power";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "ea8500:green:wifi";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
-@@ -0,0 +1,373 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 R7500";
-+ compatible = "netgear,r7500", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0xe000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ status = "ok";
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ };
-+
-+ nand at 1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata at 0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL at c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV at 1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art at 1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel at 1340000 {
-+ label = "kernel";
-+ reg = <0x1340000 0x0200000>;
-+ };
-+
-+ ubi at 1540000 {
-+ label = "ubi";
-+ reg = <0x1540000 0x1800000>;
-+ };
-+
-+ netgear at 2d40000 {
-+ label = "netgear";
-+ reg = <0x2d40000 0x0c00000>;
-+ read-only;
-+ };
-+
-+ reserve at 3940000 {
-+ label = "reserve";
-+ reg = <0x3940000 0x46c0000>;
-+ read-only;
-+ };
-+
-+ firmware at 1340000 {
-+ label = "firmware";
-+ reg = <0x1340000 0x1a00000>;
-+ };
-+
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "r7500:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "r7500:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_amber: power_amber {
-+ label = "r7500:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_white {
-+ label = "r7500:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "r7500:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "r7500:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "r7500:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_white: power_white {
-+ label = "r7500:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "r7500:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
-@@ -0,0 +1,416 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 R7500v2";
-+ compatible = "netgear,r7500v2", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+
-+ rsvd at 5fe00000 {
-+ reg = <0x5fe00000 0x200000>;
-+ reusable;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ status = "ok";
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ nand at 1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata at 0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL at c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV at 1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art at 1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art at 1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel at 1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi at 1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
-+
-+ netgear at 3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
-+
-+ reserve at 7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
-+
-+ firmware at 1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "r7500v2:amber:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb3 {
-+ label = "r7500v2:amber:usb3";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ status {
-+ label = "r7500v2:amber:status";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ internet {
-+ label = "r7500v2:white:internet";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "r7500v2:white:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "r7500v2:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "r7500v2:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "r7500v2:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "r7500v2:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
-@@ -0,0 +1,425 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "TP-Link Archer VR2600v";
-+ compatible = "tplink,vr2600v", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &general;
-+ led-running = &power;
-+ led-upgrade = &general;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-+ "gpio26", "gpio53", "gpio56", "gpio66";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
-+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi at 1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi at 1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: W25Q128 at 0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ SBL1 at 0 {
-+ label = "SBL1";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+
-+ MIBIB at 20000 {
-+ label = "MIBIB";
-+ reg = <0x20000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL2 at 40000 {
-+ label = "SBL2";
-+ reg = <0x40000 0x40000>;
-+ read-only;
-+ };
-+
-+ SBL3 at 80000 {
-+ label = "SBL3";
-+ reg = <0x80000 0x80000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG at 100000 {
-+ label = "DDRCONFIG";
-+ reg = <0x100000 0x10000>;
-+ read-only;
-+ };
-+
-+ SSD at 110000 {
-+ label = "SSD";
-+ reg = <0x110000 0x10000>;
-+ read-only;
-+ };
-+
-+ TZ at 120000 {
-+ label = "TZ";
-+ reg = <0x120000 0x80000>;
-+ read-only;
-+ };
-+
-+ RPM at 1a0000 {
-+ label = "RPM";
-+ reg = <0x1a0000 0x80000>;
-+ read-only;
-+ };
-+
-+ APPSBL at 220000 {
-+ label = "APPSBL";
-+ reg = <0x220000 0x80000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV at 2a0000 {
-+ label = "APPSBLENV";
-+ reg = <0x2a0000 0x40000>;
-+ read-only;
-+ };
-+
-+ OLDART at 2e0000 {
-+ label = "OLDART";
-+ reg = <0x2e0000 0x40000>;
-+ read-only;
-+ };
-+
-+ kernel at 320000 {
-+ label = "kernel";
-+ reg = <0x320000 0x200000>;
-+ };
-+
-+ rootfs at 520000 {
-+ label = "rootfs";
-+ reg = <0x520000 0xa60000>;
-+ };
-+
-+ defaultmac: default-mac at 0xfaf100 {
-+ label = "default-mac";
-+ reg = <0xfaf100 0x00200>;
-+ read-only;
-+ };
-+
-+ ART at fc0000 {
-+ label = "ART";
-+ reg = <0xfc0000 0x40000>;
-+ read-only;
-+ };
-+ };
-+ };
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&defaultmac 0>;
-+ mtd-mac-address-increment = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&defaultmac 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+
-+ dect {
-+ label = "dect";
-+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_PHONE>;
-+ };
-+
-+ ledswitch {
-+ label = "ledswitch";
-+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_LIGHTS_TOGGLE>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ dsl {
-+ label = "vr2600v:white:dsl";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb {
-+ label = "vr2600v:white:usb";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ lan {
-+ label = "vr2600v:white:lan";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wlan2g {
-+ label = "vr2600v:white:wlan2g";
-+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wlan5g {
-+ label = "vr2600v:white:wlan5g";
-+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "vr2600v:white:power";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ phone {
-+ label = "vr2600v:white:phone";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "vr2600v:white:wan";
-+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ general: general {
-+ label = "vr2600v:white:general";
-+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
-@@ -0,0 +1,153 @@
-+#include "qcom-ipq8064.dtsi"
-+
-+/ {
-+ model = "Qualcomm IPQ8065";
-+ compatible = "qcom,ipq8065", "qcom,ipq8064";
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 1725000000 1262500 >,
-+ < 1400000000 1175000 >,
-+ < 1000000000 1100000 >,
-+ < 800000000 1050000 >,
-+ < 600000000 1000000 >,
-+ < 384000000 975000 >;
-+ qcom,speed0-pvs1-bin-v0 =
-+ < 1725000000 1225000 >,
-+ < 1400000000 1150000 >,
-+ < 1000000000 1075000 >,
-+ < 800000000 1025000 >,
-+ < 600000000 975000 >,
-+ < 384000000 950000 >;
-+ qcom,speed0-pvs2-bin-v0 =
-+ < 1725000000 1200000 >,
-+ < 1400000000 1125000 >,
-+ < 1000000000 1050000 >,
-+ < 800000000 1000000 >,
-+ < 600000000 950000 >,
-+ < 384000000 925000 >;
-+ qcom,speed0-pvs3-bin-v0 =
-+ < 1725000000 1175000 >,
-+ < 1400000000 1100000 >,
-+ < 1000000000 1025000 >,
-+ < 800000000 975000 >,
-+ < 600000000 925000 >,
-+ < 384000000 900000 >;
-+ qcom,speed0-pvs4-bin-v0 =
-+ < 1725000000 1150000 >,
-+ < 1400000000 1075000 >,
-+ < 1000000000 1000000 >,
-+ < 800000000 950000 >,
-+ < 600000000 900000 >,
-+ < 384000000 875000 >;
-+ qcom,speed0-pvs5-bin-v0 =
-+ < 1725000000 1100000 >,
-+ < 1400000000 1025000 >,
-+ < 1000000000 950000 >,
-+ < 800000000 900000 >,
-+ < 600000000 850000 >,
-+ < 384000000 825000 >;
-+ qcom,speed0-pvs6-bin-v0 =
-+ < 1725000000 1050000 >,
-+ < 1400000000 975000 >,
-+ < 1000000000 900000 >,
-+ < 800000000 850000 >,
-+ < 600000000 800000 >,
-+ < 384000000 775000 >;
-+ };
-+
-+ soc: soc {
-+
-+ rpm at 108000 {
-+
-+ regulators {
-+
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = <775000>;
-+ regulator-max-microvolt = <1275000>;
-+ };
-+
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = <775000>;
-+ regulator-max-microvolt = <1275000>;
-+ };
-+ };
-+ };
-+
-+ /* Temporary fixed regulator */
-+ vsdcc_fixed: vsdcc-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "SDCC Power";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ sdcc1bam:dma at 12402000 {
-+ compatible = "qcom,bam-v1.3.0";
-+ reg = <0x12402000 0x8000>;
-+ interrupts = <0 98 0>;
-+ clocks = <&gcc SDC1_H_CLK>;
-+ clock-names = "bam_clk";
-+ #dma-cells = <1>;
-+ qcom,ee = <0>;
-+ };
-+
-+ sdcc3bam:dma at 12182000 {
-+ compatible = "qcom,bam-v1.3.0";
-+ reg = <0x12182000 0x8000>;
-+ interrupts = <0 96 0>;
-+ clocks = <&gcc SDC3_H_CLK>;
-+ clock-names = "bam_clk";
-+ #dma-cells = <1>;
-+ qcom,ee = <0>;
-+ };
-+
-+ amba {
-+ compatible = "arm,amba-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ sdcc1: sdcc at 12400000 {
-+ status = "disabled";
-+ compatible = "arm,pl18x", "arm,primecell";
-+ arm,primecell-periphid = <0x00051180>;
-+ reg = <0x12400000 0x2000>;
-+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "cmd_irq";
-+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-+ clock-names = "mclk", "apb_pclk";
-+ bus-width = <8>;
-+ max-frequency = <96000000>;
-+ non-removable;
-+ cap-sd-highspeed;
-+ cap-mmc-highspeed;
-+ vmmc-supply = <&vsdcc_fixed>;
-+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-+ dma-names = "tx", "rx";
-+ };
-+
-+ sdcc3: sdcc at 12180000 {
-+ compatible = "arm,pl18x", "arm,primecell";
-+ arm,primecell-periphid = <0x00051180>;
-+ status = "disabled";
-+ reg = <0x12180000 0x2000>;
-+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "cmd_irq";
-+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-+ clock-names = "mclk", "apb_pclk";
-+ bus-width = <8>;
-+ cap-sd-highspeed;
-+ cap-mmc-highspeed;
-+ max-frequency = <192000000>;
-+ #mmc-ddr-1_8v;
-+ sd-uhs-sdr104;
-+ sd-uhs-ddr50;
-+ vqmmc-supply = <&vsdcc_fixed>;
-+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-+ dma-names = "tx", "rx";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
-@@ -0,0 +1,388 @@
-+#include "qcom-ipq8065-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "ZyXEL NBG6817";
-+ compatible = "zyxel,nbg6817", "qcom,ipq8065";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ sdcc1 = &sdcc1;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio9", "gpio26", "gpio33", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-down;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ clk {
-+ pins = "gpio1";
-+ input-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ tx {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-+ input-disable;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio17";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ };
-+
-+ pwr {
-+ pins = "gpio17";
-+ bias-pull-down;
-+ output-high;
-+ };
-+
-+ ovc {
-+ pins = "gpio16";
-+ bias-pull-up;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio14", "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ };
-+
-+ pwr {
-+ pins = "gpio14";
-+ bias-pull-down;
-+ output-high;
-+ };
-+
-+ ovc {
-+ pins = "gpio15";
-+ bias-pull-up;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi at 1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi at 1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80 at 0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <51200000>;
-+ reg = <0>;
-+
-+ linux,part-probe = "qcom-smem";
-+ };
-+ };
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
-+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
-+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
-+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
-+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
-+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
-+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
-+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
-+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
-+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
-+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
-+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
-+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
-+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ qca,ar8327-initvals = <
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ >;
-+ };
-+ };
-+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <0>;
-+ qcom,rgmii_delay = <1>;
-+ qcom,phy_mii_type = <0>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <255>;
-+ mdiobus = <&mdio0>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,phy_mii_type = <1>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <258>;
-+ mdiobus = <&mdio0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ amba {
-+ sdcc1: sdcc at 12400000 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ internet {
-+ label = "nbg6817:white:internet";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "nbg6817:white:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi2g {
-+ label = "nbg6817:amber:wifi2g";
-+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ /* wifi2g amber from the manual is missing */
-+
-+ wifi5g {
-+ label = "nbg6817:amber:wifi5g";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ /* wifi5g amber from the manual is missing */
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
-@@ -0,0 +1,566 @@
-+#include "qcom-ipq8065-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4S R7800";
-+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-+
-+ memory at 0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd at 41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+
-+ rsvd at 5fe00000 {
-+ reg = <0x5fe00000 0x200000>;
-+ reusable;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux at 800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-down;
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ clk {
-+ pins = "gpio1";
-+ input-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ tx {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-+ input-disable;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
-+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ spi6_pins: spi6_pins {
-+ mux {
-+ pins = "gpio55", "gpio56", "gpio58";
-+ function = "gsbi6";
-+ bias-pull-down;
-+ };
-+
-+ mosi {
-+ pins = "gpio55";
-+ drive-strength = <12>;
-+ };
-+
-+ miso {
-+ pins = "gpio56";
-+ drive-strength = <14>;
-+ };
-+
-+ cs {
-+ pins = "gpio57";
-+ drive-strength = <12>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio58";
-+ drive-strength = <12>;
-+ };
-+
-+ reset {
-+ pins = "gpio33";
-+ drive-strength = <10>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi at 16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial at 16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi at 1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi5: spi at 1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80 at 0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ linux,part-probe = "qcom-smem";
-+ };
-+ };
-+ };
-+
-+ gsbi6: gsbi at 16500000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+ spi6: spi at 16580000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi6_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-+
-+ spi-nor at 0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <6000000>;
-+ };
-+ };
-+ };
-+
-+ sata-phy at 1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata at 29000000 {
-+ ports-implemented = <0x1>;
-+ status = "ok";
-+ };
-+
-+ phy at 100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy at 110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30 at 0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30 at 1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci at 1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
++ status = "disabled";
+ };
+
+ pcie1: pci at 1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
++ compatible = "qcom,pcie-v0";
++ reg = <0x1b700000 0x1000
++ 0x1b702000 0x80
++ 0x1b800000 0x100
++ 0x31f00000 0x100000>;
++ reg-names = "dbi", "elbi", "parf", "config";
++ device_type = "pci";
++ linux,pci-domain = <1>;
++ bus-range = <0x00 0xff>;
++ num-lanes = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
+
-+ nand at 1ac00000 {
-+ status = "ok";
++ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
++ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
++ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
++ interrupt-names = "msi";
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 0x7>;
++ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
++ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
++ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
++ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-bus-width = <8>;
++ clocks = <&gcc PCIE_1_A_CLK>,
++ <&gcc PCIE_1_H_CLK>,
++ <&gcc PCIE_1_PHY_CLK>,
++ <&gcc PCIE_1_AUX_CLK>,
++ <&gcc PCIE_1_ALT_REF_CLK>;
++ clock-names = "core", "iface", "phy", "aux", "ref";
+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
++ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
++ assigned-clock-rates = <100000000>;
+
-+ qcadata at 0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
++ resets = <&gcc PCIE_1_ACLK_RESET>,
++ <&gcc PCIE_1_HCLK_RESET>,
++ <&gcc PCIE_1_POR_RESET>,
++ <&gcc PCIE_1_PCI_RESET>,
++ <&gcc PCIE_1_PHY_RESET>,
++ <&gcc PCIE_1_EXT_RESET>;
++ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
-+ APPSBL at c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
++ pinctrl-0 = <&pcie1_pins>;
++ pinctrl-names = "default";
+
-+ APPSBLENV at 1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
++ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
-+ art: art at 1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
++ status = "disabled";
++ };
+
-+ artbak: art at 1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
++ pcie2: pci at 1b900000 {
++ compatible = "qcom,pcie-v0";
++ reg = <0x1b900000 0x1000
++ 0x1b902000 0x80
++ 0x1ba00000 0x100
++ 0x35f00000 0x100000>;
++ reg-names = "dbi", "elbi", "parf", "config";
++ device_type = "pci";
++ linux,pci-domain = <2>;
++ bus-range = <0x00 0xff>;
++ num-lanes = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
+
-+ kernel at 1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
++ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
++ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
-+ ubi at 1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
++ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
++ interrupt-names = "msi";
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 0x7>;
++ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
++ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
++ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
++ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
-+ netgear at 3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
++ clocks = <&gcc PCIE_2_A_CLK>,
++ <&gcc PCIE_2_H_CLK>,
++ <&gcc PCIE_2_PHY_CLK>,
++ <&gcc PCIE_2_AUX_CLK>,
++ <&gcc PCIE_2_ALT_REF_CLK>;
++ clock-names = "core", "iface", "phy", "aux", "ref";
+
-+ reserve at 7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
++ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
++ assigned-clock-rates = <100000000>;
+
-+ firmware at 1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+ };
++ resets = <&gcc PCIE_2_ACLK_RESET>,
++ <&gcc PCIE_2_HCLK_RESET>,
++ <&gcc PCIE_2_POR_RESET>,
++ <&gcc PCIE_2_PCI_RESET>,
++ <&gcc PCIE_2_PHY_RESET>,
++ <&gcc PCIE_2_EXT_RESET>;
++ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
++ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
++ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
-+ phy0: ethernet-phy at 0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
-+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
-+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
-+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
-+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
-+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
-+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
-+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
-+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
-+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
-+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
-+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
-+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
-+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
-+ >;
-+ qca,ar8327-vlans = <
-+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
-+ 0x2 0x21 /* VLAN2 Ports 0/5 */
-+ >;
-+ };
++ status = "disabled";
++ };
+
-+ phy4: ethernet-phy at 4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ qca,ar8327-initvals = <
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ >;
-+ };
+ adm_dma: dma at 18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+- interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
++ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+@@ -365,7 +903,7 @@
+ };
+
+ nand at 1ac00000 {
+- compatible = "qcom,ipq806x-nand";
++ compatible = "qcom,ebi2-nandc";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+@@ -380,5 +918,103 @@
+ status = "disabled";
+ };
+
++ nss_common: syscon at 03000000 {
++ compatible = "syscon";
++ reg = <0x03000000 0x0000FFFF>;
+ };
+
-+ gmac1: ethernet at 37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <0>;
-+ qcom,rgmii_delay = <1>;
-+ qcom,phy_mii_type = <0>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <255>;
-+ mdiobus = <&mdio0>;
++ qsgmii_csr: syscon at 1bb00000 {
++ compatible = "syscon";
++ reg = <0x1bb00000 0x000001FF>;
++ };
+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
++ gmac0: ethernet at 37000000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37000000 0x200000>;
++ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
+
-+ mtd-mac-address = <&art 6>;
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
++ clocks = <&gcc GMAC_CORE1_CLK>;
++ clock-names = "stmmaceth";
++
++ resets = <&gcc GMAC_CORE1_RESET>;
++ reset-names = "stmmaceth";
++
++ status = "disabled";
+ };
+
-+ gmac2: ethernet at 37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,phy_mii_type = <1>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <258>;
-+ mdiobus = <&mdio0>;
++ gmac1: ethernet at 37200000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37200000 0x200000>;
++ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
+
-+ mtd-mac-address = <&art 0>;
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
++ clocks = <&gcc GMAC_CORE2_CLK>;
++ clock-names = "stmmaceth";
+
-+ rpm at 108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
++ resets = <&gcc GMAC_CORE2_RESET>;
++ reset-names = "stmmaceth";
+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ debounce-interval = <60>;
-+ wakeup-source;
++ status = "disabled";
+ };
+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <60>;
-+ wakeup-source;
-+ };
++ gmac2: ethernet at 37400000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37400000 0x200000>;
++ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ debounce-interval = <60>;
-+ wakeup-source;
-+ };
-+ };
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
++ clocks = <&gcc GMAC_CORE3_CLK>;
++ clock-names = "stmmaceth";
+
-+ power_white: power_white {
-+ label = "r7800:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
++ resets = <&gcc GMAC_CORE3_RESET>;
++ reset-names = "stmmaceth";
+
-+ power_amber: power_amber {
-+ label = "r7800:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
++ status = "disabled";
+ };
+
-+ wan_white {
-+ label = "r7800:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
++ gmac3: ethernet at 37600000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37600000 0x200000>;
++ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
+
-+ wan_amber {
-+ label = "r7800:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
+
-+ usb1 {
-+ label = "r7800:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
++ clocks = <&gcc GMAC_CORE4_CLK>;
++ clock-names = "stmmaceth";
+
-+ usb2 {
-+ label = "r7800:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
++ resets = <&gcc GMAC_CORE4_RESET>;
++ reset-names = "stmmaceth";
+
-+ esata {
-+ label = "r7800:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
++ status = "disabled";
+ };
++ };
+
-+ wifi {
-+ label = "r7800:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
++ sfpb_mutex: sfpb-mutex {
++ compatible = "qcom,sfpb-mutex";
++ syscon = <&sfpb_mutex_block 4 4>;
+
-+ wps {
-+ label = "r7800:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
++ #hwlock-cells = <1>;
+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
-@@ -0,0 +1 @@
-+#include "qcom-ipq8065.dtsi"
++
++ smem {
++ compatible = "qcom,smem";
++ memory-region = <&smem>;
++ hwlocks = <&sfpb_mutex 3>;
+ };
+ };
More information about the lede-commits
mailing list