[source] ramips: fix EX2700 wireless mac

[LEDE Commits]

jow pushed a commit to source.git, branch master:
https://git.lede-project.org/0cc04d05f653c01a6018306a5d03a7339ab2508c

commit 0cc04d05f653c01a6018306a5d03a7339ab2508c
Author: Joseph C. Lehner <joseph.c.lehner at gmail.com>
AuthorDate: Wed Jan 25 17:57:56 2017 +0100

    ramips: fix EX2700 wireless mac
    
    On some EX2700 devices, the MAC address from the eeprom data differs
    from the actual MAC address. Fix that, and cleanup the DTS file
    while we're at it.
    
    Signed-off-by: Joseph C. Lehner <joseph.c.lehner at gmail.com>
---
 target/linux/ramips/dts/EX2700.dts | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/target/linux/ramips/dts/EX2700.dts b/target/linux/ramips/dts/EX2700.dts
index 348ca78..6c66c20 100644
--- a/target/linux/ramips/dts/EX2700.dts
+++ b/target/linux/ramips/dts/EX2700.dts
@@ -13,6 +13,7 @@
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "ralink,mt7620a-soc";
@@ -27,38 +28,38 @@
 
 		power_g {
 			label = "ex2700:green:power";
-			gpios = <&gpio0 9 1>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
 		power_r {
 			label = "ex2700:red:power";
-			gpios = <&gpio0 11 1>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
 		device_g {
 			label = "ex2700:green:device";
-			gpios = <&gpio0 13 1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
 
 		device_r {
 			label = "ex2700:red:device";
-			gpios = <&gpio0 10 1>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 
 		router_g {
 			label = "ex2700:green:router";
-			gpios = <&gpio0 12 1>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
 
 		router_r {
 			label = "ex2700:red:router";
-			gpios = <&gpio0 14 1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 
 		wps {
 			label = "ex2700:green:wps";
-			gpios = <&gpio1 15 1>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -70,13 +71,13 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 1 1>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&gpio0 2 1>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
@@ -98,7 +99,6 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80", "mx25l3205d";
 		spi-max-frequency = <10000000>;
 
 		partition at 0 {
@@ -131,15 +131,13 @@
 };
 
 &wmac {
+	mtd-mac-address = <&art 0x6>;
 	ralink,mtd-eeprom = <&art 0x1000>;
 };
 
 &pinctrl {
 	state_default: pinctrl0 {
 		default {
-			//  spi refclk: pins 37, 38, 39
-			//       uartf: pins 8, 9, 10, 11, 12, 13, 14
-			//         i2c: pins 1, 2
 			ralink,group = "i2c", "uartf", "spi refclk";
 			ralink,function = "gpio";
 		};