[source] ar71xx: add support to TP-Link Archer C59v1 and C60v1

LEDE Commits lede-commits at lists.infradead.org
Thu Jan 26 02:38:44 PST 2017 

jow pushed a commit to source.git, branch master:
https://git.lede-project.org/e39dc8d823c86559eedbbdcee5f5c14b827fed0f

commit e39dc8d823c86559eedbbdcee5f5c14b827fed0f
Author: Henryk Heisig <hyniu at o2.pl>
AuthorDate: Tue Dec 27 22:41:41 2016 +0100

    ar71xx: add support to TP-Link Archer C59v1 and C60v1
    
    TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
    QCA9561+QCA9886.
    
    Specification:
    
    - 775/650/258 MHz (CPU/DDR/AHB)
    - 128 MB of RAM (DDR2)
    - 16 MB of FLASH (SPI NOR)
    - 3T3R 2.4 GHz
    - 2T2R 5 GHz
    - 5x 10/100 Mbps Ethernet
    - USB 2.0 port
    - 8x LED (controled by 74HC595), 3x button
    - UART header on PCB
    
    TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
    QCA9561+QCA9886.
    
    Specification:
    
    - 775/650/258 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 8 MB of FLASH (SPI NOR)
    - 3T3R 2.4 GHz
    - 2T2R 5 GHz
    - 5x 10/100 Mbps Ethernet
    - 7x LED, 2x button
    - UART header on PCB
    
    Currently not working:
    - Port LAN1 on C59, LAN4 on C60
    - WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
    - Update from oficial web interface ( tplink-saveloader not support "product-info")
    
    Flash instruction:
    1. Set PC to fixed ip address 192.168.0.66
    2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
    and rename it to tp_recovery.bin
    3. Start a tftp server with the file tp_recovery.bin in its root directory
    4. Turn off the router
    5. Press and hold Reset button
    6. Turn on router with the reset button pressed and wait ~15 seconds
    7. Release the reset button and after a short time
    the firmware should be transferred from the tftp server
    8. Wait ~30 second to complete recovery.
    
    Flash instruction under U-Boot, using UART:
    
    1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
    2. erase 0x9f020000 +$filesize
    3. cp.b $fileaddr 0x9f020000 $filesize
    4. reset
    
    Signed-off-by: Henryk Heisig <hyniu at o2.pl>
    [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
    Signed-off-by: Jo-Philipp Wich <jo at mein.io>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds |  13 ++
 .../linux/ar71xx/base-files/etc/board.d/02_network |   5 +
 target/linux/ar71xx/base-files/etc/diag.sh         |   2 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata       |   2 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |   6 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |   2 +
 target/linux/ar71xx/config-4.4                     |   4 +
 .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |  21 ++
 target/linux/ar71xx/files/arch/mips/ath79/Makefile |   2 +
 .../files/arch/mips/ath79/mach-archer-c59-v1.c     | 223 +++++++++++++++++++++
 .../files/arch/mips/ath79/mach-archer-c60-v1.c     | 135 +++++++++++++
 .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   2 +
 target/linux/ar71xx/image/tp-link.mk               |  39 ++++
 target/linux/ar71xx/mikrotik/config-default        |   2 +
 target/linux/ar71xx/nand/config-default            |   2 +
 tools/firmware-utils/src/tplink-safeloader.c       |  71 +++++++
 16 files changed, 531 insertions(+)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 7a7329f..b1ecb02 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -41,6 +41,19 @@ antrouter-r1)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
 	ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
 	;;
+archer-c59-v1|\
+archer-c60-v1)
+	ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+	ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+	case "$board" in
+	archer-c59-v1)
+		ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+		;;
+	esac
+	;;
 arduino-yun)
 	ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
 	ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 551871e..976440e 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -196,6 +196,11 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0 at eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6 at eth0" "1:wan"
 		;;
+	archer-c59-v1|\
+	archer-c60-v1)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+		;;
 	arduino-yun|\
 	dir-505-a1|\
 	tl-wa801nd-v3)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 4bbb93a..edcf621 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -41,6 +41,8 @@ get_status_led() {
 	ap135-020)
 		status_led="ap135:green:status"
 		;;
+	archer-c59-v1|\
+	archer-c60-v1|\
 	mr12|\
 	mr16|\
 	nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a4f426e..8693d8a 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -90,6 +90,8 @@ case "$FIRMWARE" in
 		ath10kcal_extract "art" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
+	archer-c59-v1|\
+	archer-c60-v1|\
 	tl-wdr6500-v2)
 		ath10kcal_extract "art" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ad73ec1..3ca2c0d 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -454,6 +454,12 @@ ar71xx_board_detect() {
 	*"Archer C5")
 		name="archer-c5"
 		;;
+	*"Archer C59 v1")
+		name="archer-c59-v1"
+		;;
+	*"Archer C60 v1")
+		name="archer-c60-v1"
+		;;
 	*"Archer C7")
 		name="archer-c7"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e0ba5d3..cf2aab2 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -205,6 +205,8 @@ platform_check_image() {
 	airrouter|\
 	ap132|\
 	ap90q|\
+	archer-c59-v1|\
+	archer-c60-v1|\
 	bullet-m|\
 	c-55|\
 	carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 26de3a6..8ba0c2a 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -49,6 +49,8 @@ CONFIG_ATH79_MACH_AP152=y
 # CONFIG_ATH79_MACH_AP81 is not set
 CONFIG_ATH79_MACH_AP90Q=y
 CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C59_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V1=y
 CONFIG_ATH79_MACH_ARCHER_C7=y
 CONFIG_ATH79_MACH_ARDUINO_YUN=y
 CONFIG_ATH79_MACH_AW_NR580=y
@@ -272,6 +274,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
 CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_LATCH is not set
 CONFIG_GPIO_NXP_74HC153=y
@@ -430,6 +433,7 @@ CONFIG_SOC_QCA956X=y
 CONFIG_SPI=y
 CONFIG_SPI_ATH79=y
 CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 # CONFIG_SPI_RB4XX is not set
 # CONFIG_SPI_VSC7385 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index c3f9588..d06ae48 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1255,6 +1255,27 @@ config ATH79_MACH_BSB
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_ARCHER_C59_V1
+	bool "TP-LINK Archer C59 v1 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+	bool "TP-LINK Archer C60 v1 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_ARCHER_C7
 	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
 	select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index ac0bbc4..e9d69a4 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -54,6 +54,8 @@ obj-$(CONFIG_ATH79_MACH_AP147)			+= mach-ap147.o
 obj-$(CONFIG_ATH79_MACH_AP152)			+= mach-ap152.o
 obj-$(CONFIG_ATH79_MACH_AP90Q)			+= mach-ap90q.o
 obj-$(CONFIG_ATH79_MACH_AP96)			+= mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1)		+= mach-archer-c59-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1)		+= mach-archer-c60-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C7)		+= mach-archer-c7.o
 obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)		+= mach-arduino-yun.o
 obj-$(CONFIG_ATH79_MACH_AW_NR580)		+= mach-aw-nr580.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
new file mode 100644
index 0000000..28353aa
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -0,0 +1,223 @@
+/*
+ *  TP-Link Archer C59 v1 board support
+ *
+ *  Copyright (C) 2016 Henryk Heisig <hyniu at o2.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C59_V1_KEYS_POLL_INTERVAL	20
+#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL	(3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C59_V1_GPIO_BTN_RESET		21
+#define ARCHER_C59_V1_GPIO_BTN_RFKILL		2
+#define ARCHER_C59_V1_GPIO_BTN_WPS		1
+
+#define ARCHER_C59_V1_GPIO_USB_POWER		22
+
+#define ARCHER_C59_GPIO_SHIFT_OE		16
+#define ARCHER_C59_GPIO_SHIFT_SER		17
+#define ARCHER_C59_GPIO_SHIFT_SRCLK		18
+#define ARCHER_C59_GPIO_SHIFT_SRCLR		19
+#define ARCHER_C59_GPIO_SHIFT_RCLK		20
+
+#define ARCHER_C59_74HC_GPIO_BASE		QCA956X_GPIO_COUNT
+#define ARCHER_C59_74HC_GPIO_LED_POWER		23
+#define ARCHER_C59_74HC_GPIO_LED_WLAN2		24
+#define ARCHER_C59_74HC_GPIO_LED_WLAN5		25
+#define ARCHER_C59_74HC_GPIO_LED_LAN		26
+#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN	27
+#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER	28
+#define ARCHER_C59_74HC_GPIO_LED_WPS		29
+#define ARCHER_C59_74HC_GPIO_LED_USB		30
+
+#define ARCHER_C59_V1_SSR_BIT_0			0
+#define ARCHER_C59_V1_SSR_BIT_1			1
+#define ARCHER_C59_V1_SSR_BIT_2			2
+#define ARCHER_C59_V1_SSR_BIT_3			3
+#define ARCHER_C59_V1_SSR_BIT_4			4
+#define ARCHER_C59_V1_SSR_BIT_5			5
+#define ARCHER_C59_V1_SSR_BIT_6			6
+#define ARCHER_C59_V1_SSR_BIT_7			7
+
+#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET	0x1000
+#define ARCHER_C59_V1_PCI_CALDATA_OFFSET	0x5000
+
+static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "archer-c59-v1:green:power",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:wlan2g",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_WLAN2,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:wlan5g",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_WLAN5,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:lan",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_LAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:wan",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:amber:wan",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:wps",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c59-v1:green:usb",
+		.gpio		= ARCHER_C59_74HC_GPIO_LED_USB,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
+	{
+		.desc			= "Reset button",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C59_V1_GPIO_BTN_RESET,
+		.active_low		= 1,
+	},
+	{
+		.desc			= "RFKILL button",
+		.type			= EV_KEY,
+		.code			= KEY_RFKILL,
+		.debounce_interval	= ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C59_V1_GPIO_BTN_RFKILL,
+		.active_low		= 1,
+	},
+	{
+		.desc			= "WPS button",
+		.type			= EV_KEY,
+		.code			= KEY_WPS_BUTTON,
+		.debounce_interval	= ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C59_V1_GPIO_BTN_WPS,
+		.active_low		= 1,
+	},
+};
+
+static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
+	.sck		= ARCHER_C59_GPIO_SHIFT_SRCLK,
+	.miso		= SPI_GPIO_NO_MISO,
+	.mosi		= ARCHER_C59_GPIO_SHIFT_SER,
+	.num_chipselect = 1,
+};
+
+static u8 archer_c59_v1_ssr_initdata[] __initdata = {
+	BIT(ARCHER_C59_V1_SSR_BIT_7) |
+	BIT(ARCHER_C59_V1_SSR_BIT_6) |
+	BIT(ARCHER_C59_V1_SSR_BIT_5) |
+	BIT(ARCHER_C59_V1_SSR_BIT_4) |
+	BIT(ARCHER_C59_V1_SSR_BIT_3) |
+	BIT(ARCHER_C59_V1_SSR_BIT_2) |
+	BIT(ARCHER_C59_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
+	.base = ARCHER_C59_74HC_GPIO_BASE,
+	.num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
+	.init_data = archer_c59_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c59_v1_spi_device = {
+	.name		= "spi_gpio",
+	.id		= 1,
+	.dev = {
+		.platform_data = &archer_c59_v1_spi_data,
+	},
+};
+
+static struct spi_board_info archer_c59_v1_spi_info[] = {
+	{
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.max_speed_hz	= 10000000,
+		.modalias	= "74x164",
+		.platform_data	=  &archer_c59_v1_ssr_data,
+		.controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
+	},
+};
+
+static void __init archer_c59_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+	spi_register_board_info(archer_c59_v1_spi_info,
+			   ARRAY_SIZE(archer_c59_v1_spi_info));
+	platform_device_register(&archer_c59_v1_spi_device);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+				archer_c59_v1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(archer_c59_v1_gpio_keys),
+					archer_c59_v1_gpio_keys);
+
+	ath79_register_mdio(1, 0x0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_eth1_data.phy_mask = BIT(4);
+	ath79_register_eth(1);
+
+	ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
+	ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
+
+
+	ath79_register_usb();
+	gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "USB power");
+	gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
+			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+			 "LED control");
+	gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "LED reset");
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
+	"TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
new file mode 100644
index 0000000..78186f0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -0,0 +1,135 @@
+/*
+ *  TP-Link Archer C60 v1 board support
+ *
+ *  Copyright (C) 2016 Henryk Heisig <hyniu at o2.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C60_V1_GPIO_LED_LAN		2
+#define ARCHER_C60_V1_GPIO_LED_POWER		16
+#define ARCHER_C60_V1_GPIO_LED_WLAN2		17
+#define ARCHER_C60_V1_GPIO_LED_WLAN5		18
+#define ARCHER_C60_V1_GPIO_LED_WPS		19
+#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN	20
+#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER	22
+
+
+#define ARCHER_C60_V1_KEYS_POLL_INTERVAL	20
+#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL	(3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C60_V1_GPIO_BTN_RESET		21
+#define ARCHER_C60_V1_GPIO_BTN_RFKILL		1
+
+
+
+#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET	0x1000
+#define ARCHER_C60_V1_PCI_CALDATA_OFFSET	0x5000
+
+static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "archer-c60-v1:green:power",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:green:wlan2g",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_WLAN2,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:green:wlan5g",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_WLAN5,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:green:lan",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_LAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:green:wan",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:amber:wan",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "archer-c60-v1:green:wps",
+		.gpio		= ARCHER_C60_V1_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
+	{
+		.desc			= "Reset button",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C60_V1_GPIO_BTN_RESET,
+		.active_low		= 1,
+	},
+	{
+		.desc			= "RFKILL button",
+		.type			= EV_KEY,
+		.code			= KEY_RFKILL,
+		.debounce_interval	= ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C60_V1_GPIO_BTN_RFKILL,
+		.active_low		= 1,
+	},
+};
+
+static void __init archer_c60_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+	u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
+				archer_c60_v1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(archer_c60_v1_gpio_keys),
+					archer_c60_v1_gpio_keys);
+
+	ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+				   QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_register_eth(1);
+
+	ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
+	ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
+	"TP-LINK Archer C60 v1", archer_c60_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 857d0ee..12e81db 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -38,6 +38,8 @@ enum ath79_mach_type {
 	ATH79_MACH_AP90Q,			/* YunCore AP90Q */
 	ATH79_MACH_AP96,			/* Atheros AP96 */
 	ATH79_MACH_ARCHER_C5,			/* TP-LINK Archer C5 board */
+	ATH79_MACH_ARCHER_C59_V1,		/* TP-LINK Archer C59 V1 board */
+	ATH79_MACH_ARCHER_C60_V1,		/* TP-LINK Archer C60 V1 board */
 	ATH79_MACH_ARCHER_C7,			/* TP-LINK Archer C7 board */
 	ATH79_MACH_ARCHER_C7_V2,		/* TP-LINK Archer C7 V2 board */
 	ATH79_MACH_ARDUINO_YUN,			/* Yun */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 480d9ad..d163ffb 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -45,6 +45,15 @@ define Build/mktplinkfw-kernel
 	@mv $@.new $@
 endef
 
+define Build/uImageArcher
+	mkimage -A $(LINUX_KARCH) \
+		-O linux -T kernel \
+		-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+		-n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+	@mv $@.new $@
+endef
+
+
 define Device/tplink
   TPLINK_HWREV := 0x1
   TPLINK_HEADER_VERSION := 1
@@ -95,6 +104,36 @@ $(Device/tplink)
   IMAGE_SIZE := 15872k
 endef
 
+define Device/archer-c59-v1
+  DEVICE_TITLE := TP-LINK Archer C59 v1
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
+  BOARDNAME := ARCHER-C59-V1
+  TPLINK_BOARD_NAME := ARCHER-C59-V1
+  DEVICE_PROFILE := ARCHERC59V1
+  IMAGE_SIZE := 14528k
+  KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+  IMAGES := sysupgrade.bin factory.bin
+  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+  MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k at 0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c59-v1
+
+define Device/archer-c60-v1
+  DEVICE_TITLE := TP-LINK Archer C60 v1
+  DEVICE_PACKAGES := kmod-ath10k
+  BOARDNAME := ARCHER-C60-V1
+  TPLINK_BOARD_NAME := ARCHER-C60-V1
+  DEVICE_PROFILE := ARCHERC60V1
+  IMAGE_SIZE := 7936k
+  KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+  IMAGES := sysupgrade.bin factory.bin
+  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+  MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k at 0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c60-v1
+
 define Device/cpe510-520
   DEVICE_TITLE := TP-LINK CPE510/520
   DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 44ea327..6440bc4 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -15,6 +15,8 @@
 # CONFIG_ATH79_MACH_AP152 is not set
 # CONFIG_ATH79_MACH_AP90Q is not set
 # CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C7 is not set
 # CONFIG_ATH79_MACH_ARDUINO_YUN is not set
 # CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 515266b..3fcb3e6 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -8,6 +8,8 @@
 # CONFIG_ATH79_MACH_AP136 is not set
 # CONFIG_ATH79_MACH_AP147 is not set
 # CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C7 is not set
 # CONFIG_ATH79_MACH_AW_NR580 is not set
 # CONFIG_ATH79_MACH_CAP324 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 89a6787..a1dc987 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -293,6 +293,77 @@ static struct device_info boards[] = {
 		.last_sysupgrade_partition = "file-system"
 	},
 
+	/** Firmware layout for the C59v1 */
+	{
+		.id	= "ARCHER-C59-V1",
+		.vendor	= "",
+		.support_list =
+			"SupportList:\r\n"
+			"{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
+			"{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
+			"{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
+		.support_trail = '\x00',
+
+		.partitions = {
+			{"fs-uboot", 0x00000, 0x10000},
+			{"default-mac", 0x10000, 0x00200},
+			{"pin", 0x10200, 0x00200},
+			{"device-id", 0x10400, 0x00100},
+			{"product-info", 0x10500, 0x0fb00},
+			{"os-image", 0x20000, 0x180000},
+			{"file-system", 0x1a0000, 0xcb0000},
+			{"partition-table", 0xe50000, 0x10000},
+			{"soft-version", 0xe60000, 0x10000},
+			{"support-list", 0xe70000, 0x10000},
+			{"profile", 0xe80000, 0x10000},
+			{"default-config", 0xe90000, 0x10000},
+			{"user-config", 0xea0000, 0x40000},
+			{"usb-config", 0xee0000, 0x10000},
+			{"certificate", 0xef0000, 0x10000},
+			{"qos-db", 0xf00000, 0x40000},
+			{"log", 0xfe0000, 0x10000},
+			{"radio", 0xff0000, 0x10000},
+			{NULL, 0, 0}
+		},
+
+		.first_sysupgrade_partition = "os-image",
+		.last_sysupgrade_partition = "file-system",
+	},
+
+	/** Firmware layout for the C60v1 */
+	{
+		.id	= "ARCHER-C60-V1",
+		.vendor	= "",
+		.support_list =
+			"SupportList:\r\n"
+			"{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
+			"{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
+			"{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
+		.support_trail = '\x00',
+
+		.partitions = {
+			{"fs-uboot", 0x00000, 0x10000},
+			{"default-mac", 0x10000, 0x00200},
+			{"pin", 0x10200, 0x00200},
+			{"product-info", 0x10400, 0x00100},
+			{"partition-table", 0x10500, 0x00800},
+			{"soft-version", 0x11300, 0x00200},
+			{"support-list", 0x11500, 0x00100},
+			{"device-id", 0x11600, 0x00100},
+			{"profile", 0x11700, 0x03900},
+			{"default-config", 0x15000, 0x04000},
+			{"user-config", 0x19000, 0x04000},
+			{"os-image", 0x20000, 0x150000},
+			{"file-system", 0x170000, 0x678000},
+			{"certyficate", 0x7e8000, 0x08000},
+			{"radio", 0x7f0000, 0x10000},
+			{NULL, 0, 0}
+		},
+
+		.first_sysupgrade_partition = "os-image",
+		.last_sysupgrade_partition = "file-system",
+	},
+
 	/** Firmware layout for the C9 */
 	{
 		.id = "ARCHERC9",

More information about the lede-commits mailing list