[source] mvebu: Fix up some leds on this series

[LEDE Commits]

jow pushed a commit to source.git, branch master:
https://git.lede-project.org/fe876e9ac6ae71d1150583b4406a8f50401635da

commit fe876e9ac6ae71d1150583b4406a8f50401635da
Author: Kabuli Chana <newtownBuild at gmail.com>
AuthorDate: Wed Jan 4 12:35:39 2017 -0700

    mvebu: Fix up some leds on this series
    
    correct ports, fix power led on rango, tested mamba,shelby,rango
    
    Signed-off-by: Kabuli Chana <newtownBuild at gmail.com>
---
 target/linux/mvebu/base-files/etc/board.d/01_leds                 | 8 ++++----
 .../mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts    | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index 8310160..441dd04 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -15,22 +15,22 @@ case "$board" in
 armada-385-linksys-caiman)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "eth0"
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:caiman:white:usb2" "1-1"
-	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:caiman:white:usb3_1" "2-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:caiman:white:usb3_1" "3-1"
 	;;
 armada-385-linksys-cobra)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:cobra:white:wan" "eth0"
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:cobra:white:usb2" "1-1"
-	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "2-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "3-1"
 	;;
 armada-385-linksys-rango)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth0"
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:rango:white:usb2" "1-1"
-	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:rango:white:usb3_1" "2-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:rango:white:usb3_1" "3-1"
 	;;
 armada-385-linksys-shelby)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth0"
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:shelby:white:usb2" "1-1"
-	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:shelby:white:usb3_1" "2-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:shelby:white:usb3_1" "3-1"
 	;;
 armada-xp-linksys-mamba)
 	ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
index 0046125..faac0b7 100644
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -344,7 +344,7 @@
 		pinctrl-names = "default";
 
 		power {
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};