[source] ramips: add v4.9 support
LEDE Commits
lede-commits at lists.infradead.org
Tue Feb 14 03:49:31 PST 2017
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/9c2422709075196022fcbc2d0f5f83e01d02b951
commit 9c2422709075196022fcbc2d0f5f83e01d02b951
Author: John Crispin <john at phrozen.org>
AuthorDate: Mon Feb 13 12:38:27 2017 +0100
ramips: add v4.9 support
NAND support is missing
Signed-off-by: John Crispin <john at phrozen.org>
---
.../files-4.9/drivers/net/ethernet/mtk/Kconfig | 62 +
.../files-4.9/drivers/net/ethernet/mtk/Makefile | 20 +
.../drivers/net/ethernet/mtk/esw_rt3050.c | 1461 ++++++
.../drivers/net/ethernet/mtk/esw_rt3050.h | 29 +
.../files-4.9/drivers/net/ethernet/mtk/ethtool.c | 233 +
.../files-4.9/drivers/net/ethernet/mtk/ethtool.h | 22 +
.../drivers/net/ethernet/mtk/gsw_mt7620.c | 259 ++
.../drivers/net/ethernet/mtk/gsw_mt7620.h | 121 +
.../drivers/net/ethernet/mtk/gsw_mt7621.c | 285 ++
.../files-4.9/drivers/net/ethernet/mtk/mdio.c | 259 ++
.../files-4.9/drivers/net/ethernet/mtk/mdio.h | 27 +
.../drivers/net/ethernet/mtk/mdio_mt7620.c | 168 +
.../drivers/net/ethernet/mtk/mdio_rt2880.c | 222 +
.../drivers/net/ethernet/mtk/mdio_rt2880.h | 23 +
.../files-4.9/drivers/net/ethernet/mtk/mt7530.c | 895 ++++
.../files-4.9/drivers/net/ethernet/mtk/mt7530.h | 186 +
.../drivers/net/ethernet/mtk/mtk_eth_soc.c | 1595 +++++++
.../drivers/net/ethernet/mtk/mtk_eth_soc.h | 523 +++
.../drivers/net/ethernet/mtk/soc_mt7620.c | 335 ++
.../drivers/net/ethernet/mtk/soc_mt7621.c | 185 +
.../drivers/net/ethernet/mtk/soc_rt2880.c | 76 +
.../drivers/net/ethernet/mtk/soc_rt3050.c | 158 +
.../drivers/net/ethernet/mtk/soc_rt3883.c | 75 +
.../{mt7621/config-4.4 => mt7620/config-4.9} | 134 +-
target/linux/ramips/mt7621/config-4.4 | 10 +-
.../linux/ramips/mt7621/{config-4.4 => config-4.9} | 48 +-
target/linux/ramips/mt7621/target.mk | 2 -
.../{mt7621/config-4.4 => mt7628/config-4.9} | 117 +-
.../{mt7621/config-4.4 => mt7688/config-4.9} | 126 +-
.../0004-MIPS-ralink-add-MT7621-pcie-driver.patch | 857 ++++
...t_mode-to-enable-disable-the-cevt-r4k-irq.patch | 81 +
...006-MIPS-ralink-add-cpu-frequency-scaling.patch | 198 +
...-copy-the-commandline-from-the-devicetree.patch | 21 +
.../0013-owrt-hack-fix-mt7688-cache-issue.patch | 28 +
...o-not-select-illegal-access-driver-by-def.patch | 25 +
.../0024-GPIO-add-named-gpio-exports.patch | 166 +
.../0025-pinctrl-ralink-add-pinctrl-driver.patch | 524 +++
...0026-DT-Add-documentation-for-gpio-ralink.patch | 59 +
...IPS-ralink-add-gpio-driver-for-ralink-SoC.patch | 430 ++
...28-GPIO-ralink-add-mt7621-gpio-controller.patch | 405 ++
.../patches-4.9/0029-phy-usb-add-ralink-phy.patch | 293 ++
.../0031-uvc-add-iPassion-iP2970-support.patch | 246 +
.../0032-USB-dwc2-add-device_reset.patch | 29 +
.../patches-4.9/0034-NET-multi-phy-support.patch | 53 +
...td-fix-cfi-cmdset-0002-erase-status-check.patch | 29 +
...0037-mtd-cfi-cmdset-0002-force-word-write.patch | 70 +
.../0041-DT-Add-documentation-for-spi-rt2880.patch | 44 +
...0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch | 574 +++
.../patches-4.9/0043-spi-add-mt7621-support.patch | 524 +++
.../0044-i2c-MIPS-adds-ralink-I2C-driver.patch | 507 ++
.../patches-4.9/0045-i2c-add-mt7621-driver.patch | 473 ++
...mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch | 4831 ++++++++++++++++++++
.../0047-DMA-ralink-add-rt2880-dma-engine.patch | 1757 +++++++
.../patches-4.9/0048-asoc-add-mt7620-support.patch | 1046 +++++
...051-serial-add-ugly-custom-baud-rate-hack.patch | 22 +
.../0052-pwm-add-mediatek-support.patch | 217 +
.../0054-mtd-add-chunked-read-io-to-m25p80.patch | 123 +
..._BASE_CMDEFTGT_MEM-according-to-datasheet.patch | 12 +
.../patches-4.9/0064-add_clk_round_rate.patch | 15 +
.../patches-4.9/0066-mt7621-enable-highmem.patch | 10 +
.../patches-4.9/0067-enable-mt7621-xhci.patch | 14 +
.../ramips/patches-4.9/0068-fix-ralink-prom.c | 30 +
.../0069-awake-rt305x-dwc2-controller.patch | 15 +
.../ramips/patches-4.9/0085-pinmux-util.patch | 77 +
.../linux/ramips/patches-4.9/0090-ethernet.patch | 41 +
.../linux/ramips/patches-4.9/0099-pci-mt7620.patch | 19 +
.../linux/ramips/patches-4.9/0100-prom_fixes.patch | 66 +
.../patches-4.9/0105-set_mt7621_soc_type.patch | 11 +
.../ramips/patches-4.9/0200-linkit_bootstrap.patch | 97 +
.../0700-pinctrl-mt7620-mdio-as-refclk.patch | 42 +
.../0720-arch-mips-ralink-add-i2c-clocks.patch | 67 +
.../patches-4.9/0901-spansion_nand_id_fix.patch | 43 +
.../patches-4.9/100-mt7621-core-detect-hack.patch | 61 +
.../patches-4.9/200-rt3883-fix-pinctrl-typo.patch | 21 +
.../linux/ramips/patches-4.9/301-fix-rt3883.patch | 26 +
.../{mt7621/config-4.4 => rt288x/config-4.9} | 142 +-
.../{mt7621/config-4.4 => rt305x/config-4.9} | 134 +-
.../{mt7621/config-4.4 => rt3883/config-4.9} | 130 +-
78 files changed, 21768 insertions(+), 593 deletions(-)
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Kconfig b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Kconfig
new file mode 100644
index 0000000..cf883c4
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Kconfig
@@ -0,0 +1,62 @@
+config NET_VENDOR_MEDIATEK
+ tristate "Mediatek/Ralink ethernet driver"
+ depends on RALINK
+ help
+ This driver supports the ethernet mac inside the Mediatek and Ralink WiSoCs
+
+config NET_MEDIATEK_SOC
+ def_tristate NET_VENDOR_MEDIATEK
+
+if NET_MEDIATEK_SOC
+choice
+ prompt "MAC type"
+
+config NET_MEDIATEK_RT2880
+ bool "RT2882"
+ depends on MIPS && SOC_RT288X
+
+config NET_MEDIATEK_RT3050
+ bool "RT3050/MT7628"
+ depends on MIPS && (SOC_RT305X || SOC_MT7620)
+
+config NET_MEDIATEK_RT3883
+ bool "RT3883"
+ depends on MIPS && SOC_RT3883
+
+config NET_MEDIATEK_MT7620
+ bool "MT7620"
+ depends on MIPS && SOC_MT7620
+
+config NET_MEDIATEK_MT7621
+ bool "MT7621"
+ depends on MIPS && SOC_MT7621
+
+endchoice
+
+config NET_MEDIATEK_MDIO
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883 || NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
+ select PHYLIB
+
+config NET_MEDIATEK_MDIO_RT2880
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883)
+ select NET_MEDIATEK_MDIO
+
+config NET_MEDIATEK_MDIO_MT7620
+ def_bool NET_MEDIATEK_SOC
+ depends on (NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
+ select NET_MEDIATEK_MDIO
+
+config NET_MEDIATEK_ESW_RT3050
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_RT3050
+
+config NET_MEDIATEK_GSW_MT7620
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_MT7620
+
+config NET_MEDIATEK_GSW_MT7621
+ def_tristate NET_MEDIATEK_SOC
+ depends on NET_MEDIATEK_MT7621
+endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Makefile b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Makefile
new file mode 100644
index 0000000..07ba4c2
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the Ralink SoCs built-in ethernet macs
+#
+
+mtk-eth-soc-y += mtk_eth_soc.o ethtool.o
+
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO) += mdio.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_RT2880) += mdio_rt2880.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_MT7620) += mdio_mt7620.o
+
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT2880) += soc_rt2880.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3050) += soc_rt3050.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3883) += soc_rt3883.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o
+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
+
+obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o mt7530.o
+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o mt7530.o
+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.c
new file mode 100644
index 0000000..6cad585
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.c
@@ -0,0 +1,1461 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ * Copyright (C) 2016 Vittorio Gambaletta <openwrt at vittgam.net>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <linux/of_irq.h>
+
+#include <linux/switch.h>
+
+#include "mtk_eth_soc.h"
+
+/* HW limitations for this switch:
+ * - No large frame support (PKT_MAX_LEN at most 1536)
+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
+ * though this might be possible using the undocumented PPE.
+ */
+
+#define RT305X_ESW_REG_ISR 0x00
+#define RT305X_ESW_REG_IMR 0x04
+#define RT305X_ESW_REG_FCT0 0x08
+#define RT305X_ESW_REG_PFC1 0x14
+#define RT305X_ESW_REG_ATS 0x24
+#define RT305X_ESW_REG_ATS0 0x28
+#define RT305X_ESW_REG_ATS1 0x2c
+#define RT305X_ESW_REG_ATS2 0x30
+#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
+#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
+#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
+#define RT305X_ESW_REG_POA 0x80
+#define RT305X_ESW_REG_FPA 0x84
+#define RT305X_ESW_REG_SOCPC 0x8c
+#define RT305X_ESW_REG_POC0 0x90
+#define RT305X_ESW_REG_POC1 0x94
+#define RT305X_ESW_REG_POC2 0x98
+#define RT305X_ESW_REG_SGC 0x9c
+#define RT305X_ESW_REG_STRT 0xa0
+#define RT305X_ESW_REG_PCR0 0xc0
+#define RT305X_ESW_REG_PCR1 0xc4
+#define RT305X_ESW_REG_FPA2 0xc8
+#define RT305X_ESW_REG_FCT2 0xcc
+#define RT305X_ESW_REG_SGC2 0xe4
+#define RT305X_ESW_REG_P0LED 0xa4
+#define RT305X_ESW_REG_P1LED 0xa8
+#define RT305X_ESW_REG_P2LED 0xac
+#define RT305X_ESW_REG_P3LED 0xb0
+#define RT305X_ESW_REG_P4LED 0xb4
+#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
+#define RT305X_ESW_REG_P1PC 0xec
+#define RT305X_ESW_REG_P2PC 0xf0
+#define RT305X_ESW_REG_P3PC 0xf4
+#define RT305X_ESW_REG_P4PC 0xf8
+#define RT305X_ESW_REG_P5PC 0xfc
+
+#define RT305X_ESW_LED_LINK 0
+#define RT305X_ESW_LED_100M 1
+#define RT305X_ESW_LED_DUPLEX 2
+#define RT305X_ESW_LED_ACTIVITY 3
+#define RT305X_ESW_LED_COLLISION 4
+#define RT305X_ESW_LED_LINKACT 5
+#define RT305X_ESW_LED_DUPLCOLL 6
+#define RT305X_ESW_LED_10MACT 7
+#define RT305X_ESW_LED_100MACT 8
+/* Additional led states not in datasheet: */
+#define RT305X_ESW_LED_BLINK 10
+#define RT305X_ESW_LED_ON 12
+
+#define RT305X_ESW_LINK_S 25
+#define RT305X_ESW_DUPLEX_S 9
+#define RT305X_ESW_SPD_S 0
+
+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
+#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
+#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
+
+#define RT305X_ESW_PCR1_WT_DONE BIT(0)
+
+#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
+#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
+
+#define RT305X_ESW_PVIDC_PVID_M 0xfff
+#define RT305X_ESW_PVIDC_PVID_S 12
+
+#define RT305X_ESW_VLANI_VID_M 0xfff
+#define RT305X_ESW_VLANI_VID_S 12
+
+#define RT305X_ESW_VMSC_MSC_M 0xff
+#define RT305X_ESW_VMSC_MSC_S 8
+
+#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
+#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
+#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
+#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
+
+#define RT305X_ESW_POC0_EN_BP_S 0
+#define RT305X_ESW_POC0_EN_FC_S 8
+#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
+#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
+#define RT305X_ESW_POC0_DIS_PORT_S 23
+
+#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
+#define RT305X_ESW_POC2_UNTAG_EN_S 0
+#define RT305X_ESW_POC2_ENAGING_S 8
+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
+
+#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
+#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
+#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
+#define RT305X_ESW_SGC2_LAN_PMAP_S 24
+
+#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
+#define RT305X_ESW_PFC1_EN_VLAN_S 16
+#define RT305X_ESW_PFC1_EN_TOS_S 24
+
+#define RT305X_ESW_VLAN_NONE 0xfff
+
+#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
+#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
+
+#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
+#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
+
+#define RT305X_ESW_POA_LINK_MASK 0x1f
+#define RT305X_ESW_POA_LINK_SHIFT 25
+
+#define RT305X_ESW_PORT_ST_CHG BIT(26)
+#define RT305X_ESW_PORT0 0
+#define RT305X_ESW_PORT1 1
+#define RT305X_ESW_PORT2 2
+#define RT305X_ESW_PORT3 3
+#define RT305X_ESW_PORT4 4
+#define RT305X_ESW_PORT5 5
+#define RT305X_ESW_PORT6 6
+
+#define RT305X_ESW_PORTS_NONE 0
+
+#define RT305X_ESW_PMAP_LLLLLL 0x3f
+#define RT305X_ESW_PMAP_LLLLWL 0x2f
+#define RT305X_ESW_PMAP_WLLLLL 0x3e
+
+#define RT305X_ESW_PORTS_INTERNAL \
+ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
+ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
+ BIT(RT305X_ESW_PORT4))
+
+#define RT305X_ESW_PORTS_NOCPU \
+ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
+
+#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
+
+#define RT305X_ESW_PORTS_ALL \
+ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
+
+#define RT305X_ESW_NUM_VLANS 16
+#define RT305X_ESW_NUM_VIDS 4096
+#define RT305X_ESW_NUM_PORTS 7
+#define RT305X_ESW_NUM_LANWAN 6
+#define RT305X_ESW_NUM_LEDS 5
+
+#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x))
+#define RT5350_EWS_REG_LED_POLARITY 0x168
+#define RT5350_RESET_EPHY BIT(24)
+
+enum {
+ /* Global attributes. */
+ RT305X_ESW_ATTR_ENABLE_VLAN,
+ RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
+ RT305X_ESW_ATTR_BC_STATUS,
+ RT305X_ESW_ATTR_LED_FREQ,
+ /* Port attributes. */
+ RT305X_ESW_ATTR_PORT_DISABLE,
+ RT305X_ESW_ATTR_PORT_DOUBLETAG,
+ RT305X_ESW_ATTR_PORT_UNTAG,
+ RT305X_ESW_ATTR_PORT_LED,
+ RT305X_ESW_ATTR_PORT_LAN,
+ RT305X_ESW_ATTR_PORT_RECV_BAD,
+ RT305X_ESW_ATTR_PORT_RECV_GOOD,
+ RT5350_ESW_ATTR_PORT_TR_BAD,
+ RT5350_ESW_ATTR_PORT_TR_GOOD,
+};
+
+struct esw_port {
+ bool disable;
+ bool doubletag;
+ bool untag;
+ u8 led;
+ u16 pvid;
+};
+
+struct esw_vlan {
+ u8 ports;
+ u16 vid;
+};
+
+enum {
+ RT305X_ESW_VLAN_CONFIG_NONE = 0,
+ RT305X_ESW_VLAN_CONFIG_LLLLW,
+ RT305X_ESW_VLAN_CONFIG_WLLLL,
+};
+
+struct rt305x_esw {
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+
+ /* Protects against concurrent register r/w operations. */
+ spinlock_t reg_rw_lock;
+
+ unsigned char port_map;
+ unsigned char port_disable;
+ unsigned int reg_initval_fct2;
+ unsigned int reg_initval_fpa2;
+ unsigned int reg_led_polarity;
+
+ struct switch_dev swdev;
+ bool global_vlan_enable;
+ bool alt_vlan_disable;
+ int bc_storm_protect;
+ int led_frequency;
+ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
+ struct esw_port ports[RT305X_ESW_NUM_PORTS];
+
+};
+
+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
+{
+ __raw_writel(val, esw->base + reg);
+}
+
+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
+{
+ return __raw_readl(esw->base + reg);
+}
+
+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
+ unsigned long mask, unsigned long val)
+{
+ unsigned long t;
+
+ t = __raw_readl(esw->base + reg) & ~mask;
+ __raw_writel(t | val, esw->base + reg);
+}
+
+static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
+ unsigned long mask, unsigned long val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&esw->reg_rw_lock, flags);
+ esw_rmw_raw(esw, reg, mask, val);
+ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
+}
+
+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
+ u32 phy_register, u32 write_data)
+{
+ unsigned long t_start = jiffies;
+ int ret = 0;
+
+ while (1) {
+ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
+ RT305X_ESW_PCR1_WT_DONE))
+ break;
+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+ write_data &= 0xffff;
+ esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
+ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
+ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
+ RT305X_ESW_REG_PCR0);
+
+ t_start = jiffies;
+ while (1) {
+ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
+ RT305X_ESW_PCR1_WT_DONE)
+ break;
+
+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+ ret = 1;
+ break;
+ }
+ }
+out:
+ if (ret)
+ dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
+ return ret;
+}
+
+static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
+{
+ unsigned s;
+ unsigned val;
+
+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
+ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
+ val = (val >> s) & RT305X_ESW_VLANI_VID_M;
+
+ return val;
+}
+
+static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
+{
+ unsigned s;
+
+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
+ esw_rmw(esw,
+ RT305X_ESW_REG_VLANI(vlan / 2),
+ RT305X_ESW_VLANI_VID_M << s,
+ (vid & RT305X_ESW_VLANI_VID_M) << s);
+}
+
+static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
+{
+ unsigned s, val;
+
+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
+ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
+ return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
+}
+
+static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
+{
+ unsigned s;
+
+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
+ esw_rmw(esw,
+ RT305X_ESW_REG_PVIDC(port / 2),
+ RT305X_ESW_PVIDC_PVID_M << s,
+ (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
+}
+
+static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
+{
+ unsigned s, val;
+
+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
+ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
+ val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
+
+ return val;
+}
+
+static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
+{
+ unsigned s;
+
+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
+ esw_rmw(esw,
+ RT305X_ESW_REG_VMSC(vlan / 4),
+ RT305X_ESW_VMSC_MSC_M << s,
+ (msc & RT305X_ESW_VMSC_MSC_M) << s);
+}
+
+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+{
+ unsigned reg;
+
+ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
+ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
+ RT305X_ESW_POC0_DIS_PORT_M;
+}
+
+static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
+{
+ unsigned old_mask;
+ unsigned enable_mask;
+ unsigned changed;
+ int i;
+
+ old_mask = esw_get_port_disable(esw);
+ changed = old_mask ^ disable_mask;
+ enable_mask = old_mask & disable_mask;
+
+ /* enable before writing to MII */
+ esw_rmw(esw, RT305X_ESW_REG_POC0,
+ (RT305X_ESW_POC0_DIS_PORT_M <<
+ RT305X_ESW_POC0_DIS_PORT_S),
+ enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
+
+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
+ if (!(changed & (1 << i)))
+ continue;
+ if (disable_mask & (1 << i)) {
+ /* disable */
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_PDOWN);
+ } else {
+ /* enable */
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_ANRESTART |
+ BMCR_SPEED100);
+ }
+ }
+
+ /* disable after writing to MII */
+ esw_rmw(esw, RT305X_ESW_REG_POC0,
+ (RT305X_ESW_POC0_DIS_PORT_M <<
+ RT305X_ESW_POC0_DIS_PORT_S),
+ disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
+}
+
+static void esw_set_gsc(struct rt305x_esw *esw)
+{
+ esw_rmw(esw, RT305X_ESW_REG_SGC,
+ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
+ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
+ esw_rmw(esw, RT305X_ESW_REG_SGC,
+ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
+ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
+}
+
+static int esw_apply_config(struct switch_dev *dev);
+
+static void esw_hw_init(struct rt305x_esw *esw)
+{
+ int i;
+ u8 port_disable = 0;
+ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
+
+ /* vodoo from original driver */
+ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
+ /* Port priority 1 for all ports, vlan enabled. */
+ esw_w32(esw, 0x00005555 |
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
+ RT305X_ESW_REG_PFC1);
+
+ /* Enable all ports, Back Pressure and Flow Control */
+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
+ RT305X_ESW_REG_POC0);
+
+ /* Enable Aging, and VLAN TAG removal */
+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
+ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
+ RT305X_ESW_REG_POC2);
+
+ if (esw->reg_initval_fct2)
+ esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
+ else
+ esw_w32(esw, 0x0002500c, RT305X_ESW_REG_FCT2);
+
+ /* 300s aging timer, max packet len 1536, broadcast storm prevention
+ * disabled, disable collision abort, mac xor48 hash, 10 packet back
+ * pressure jam, GMII disable was_transmit, back pressure disabled,
+ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
+ * ports.
+ */
+ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
+
+ /* Setup SoC Port control register */
+ esw_w32(esw,
+ (RT305X_ESW_SOCPC_CRC_PADDING |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
+ RT305X_ESW_REG_SOCPC);
+
+ /* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
+ * turbo mii off, rgmi 3.3v off
+ * port5: disabled
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ if (esw->reg_initval_fpa2)
+ esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
+ else
+ esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
+
+ /* Force Link/Activity on ports */
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
+
+ /* Copy disabled port configuration from device tree setup */
+ port_disable = esw->port_disable;
+
+ /* Disable nonexistent ports by reading the switch config
+ * after having enabled all possible ports above
+ */
+ port_disable |= esw_get_port_disable(esw);
+
+ for (i = 0; i < 6; i++)
+ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+
+ if (ralink_soc == RT305X_SOC_RT3352) {
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient LSB=0 disable PHY */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7016);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0038);
+ }
+
+ /* select global register */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* enlarge agcsel threshold 3 and threshold 2 */
+ rt305x_mii_write(esw, 0, 1, 0x4a40);
+ /* enlarge agcsel threshold 5 and threshold 4 */
+ rt305x_mii_write(esw, 0, 2, 0x6254);
+ /* enlarge agcsel threshold */
+ rt305x_mii_write(esw, 0, 3, 0xa17f);
+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* increased squelch pulse count threshold. */
+ rt305x_mii_write(esw, 0, 16, 0x0684);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* tune TP_IDL tail and head waveform, enable power
+ * down slew rate control
+ */
+ rt305x_mii_write(esw, 0, 22, 0x253f);
+ /* set PLL/Receive bias current are calibrated */
+ rt305x_mii_write(esw, 0, 27, 0x2fda);
+ /* change PLL/Receive bias current to internal(RT3350) */
+ rt305x_mii_write(esw, 0, 28, 0xc410);
+ /* change PLL bias current to internal(RT3052_MP3) */
+ rt305x_mii_write(esw, 0, 29, 0x598b);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ } else if (ralink_soc == RT305X_SOC_RT5350) {
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ /* set the led polarity */
+ esw_w32(esw, esw->reg_led_polarity & 0x1F,
+ RT5350_EWS_REG_LED_POLARITY);
+
+ /* local registers */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient LSB=0 disable PHY */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7015);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0038);
+ }
+
+ /* global registers */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* enlarge agcsel threshold 3 and threshold 2 */
+ rt305x_mii_write(esw, 0, 1, 0x4a40);
+ /* enlarge agcsel threshold 5 and threshold 4 */
+ rt305x_mii_write(esw, 0, 2, 0x6254);
+ /* enlarge agcsel threshold 6 */
+ rt305x_mii_write(esw, 0, 3, 0xa17f);
+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* increased squelch pulse count threshold. */
+ rt305x_mii_write(esw, 0, 16, 0x0684);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* tune TP_IDL tail and head waveform, enable power
+ * down slew rate control
+ */
+ rt305x_mii_write(esw, 0, 22, 0x253f);
+ /* set PLL/Receive bias current are calibrated */
+ rt305x_mii_write(esw, 0, 27, 0x2fda);
+ /* change PLL/Receive bias current to internal(RT3350) */
+ rt305x_mii_write(esw, 0, 28, 0xc410);
+ /* change PLL bias current to internal(RT3052_MP3) */
+ rt305x_mii_write(esw, 0, 29, 0x598b);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ } else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
+ int i;
+
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
+ rt305x_mii_write(esw, 0, 26, 0x0020);
+
+ for (i = 0; i < 5; i++) {
+ rt305x_mii_write(esw, i, 31, 0x8000);
+ rt305x_mii_write(esw, i, 0, 0x3100);
+ rt305x_mii_write(esw, i, 30, 0xa000);
+ rt305x_mii_write(esw, i, 31, 0xa000);
+ rt305x_mii_write(esw, i, 16, 0x0606);
+ rt305x_mii_write(esw, i, 23, 0x0f0e);
+ rt305x_mii_write(esw, i, 24, 0x1610);
+ rt305x_mii_write(esw, i, 30, 0x1f15);
+ rt305x_mii_write(esw, i, 28, 0x6111);
+ rt305x_mii_write(esw, i, 31, 0x2000);
+ rt305x_mii_write(esw, i, 26, 0x0000);
+ }
+
+ /* 100Base AOI setting */
+ rt305x_mii_write(esw, 0, 31, 0x5000);
+ rt305x_mii_write(esw, 0, 19, 0x004a);
+ rt305x_mii_write(esw, 0, 20, 0x015a);
+ rt305x_mii_write(esw, 0, 21, 0x00ee);
+ rt305x_mii_write(esw, 0, 22, 0x0033);
+ rt305x_mii_write(esw, 0, 23, 0x020a);
+ rt305x_mii_write(esw, 0, 24, 0x0000);
+ rt305x_mii_write(esw, 0, 25, 0x024a);
+ rt305x_mii_write(esw, 0, 26, 0x035a);
+ rt305x_mii_write(esw, 0, 27, 0x02ee);
+ rt305x_mii_write(esw, 0, 28, 0x0233);
+ rt305x_mii_write(esw, 0, 29, 0x000a);
+ rt305x_mii_write(esw, 0, 30, 0x0000);
+ } else {
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7058);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0018);
+ }
+
+ /* PHY IOT */
+ /* select global register */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* tune TP_IDL tail and head waveform */
+ rt305x_mii_write(esw, 0, 22, 0x052f);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ }
+
+ if (esw->port_map)
+ port_map = esw->port_map;
+ else
+ port_map = RT305X_ESW_PMAP_LLLLLL;
+
+ /* Unused HW feature, but still nice to be consistent here...
+ * This is also exported to userspace ('lan' attribute) so it's
+ * conveniently usable to decide which ports go into the wan vlan by
+ * default.
+ */
+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
+ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
+ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
+
+ /* make the switch leds blink */
+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
+ esw->ports[i].led = 0x05;
+
+ /* Apply the empty config. */
+ esw_apply_config(&esw->swdev);
+
+ /* Only unmask the port change interrupt */
+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+}
+
+static irqreturn_t esw_interrupt(int irq, void *_esw)
+{
+ struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
+ u32 status;
+
+ status = esw_r32(esw, RT305X_ESW_REG_ISR);
+ if (status & RT305X_ESW_PORT_ST_CHG) {
+ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
+
+ link >>= RT305X_ESW_POA_LINK_SHIFT;
+ link &= RT305X_ESW_POA_LINK_MASK;
+ dev_info(esw->dev, "link changed 0x%02X\n", link);
+ }
+ esw_w32(esw, status, RT305X_ESW_REG_ISR);
+
+ return IRQ_HANDLED;
+}
+
+static int esw_apply_config(struct switch_dev *dev)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int i;
+ u8 disable = 0;
+ u8 doubletag = 0;
+ u8 en_vlan = 0;
+ u8 untag = 0;
+
+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
+ u32 vid, vmsc;
+ if (esw->global_vlan_enable) {
+ vid = esw->vlans[i].vid;
+ vmsc = esw->vlans[i].ports;
+ } else {
+ vid = RT305X_ESW_VLAN_NONE;
+ vmsc = RT305X_ESW_PORTS_NONE;
+ }
+ esw_set_vlan_id(esw, i, vid);
+ esw_set_vmsc(esw, i, vmsc);
+ }
+
+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
+ u32 pvid;
+ disable |= esw->ports[i].disable << i;
+ if (esw->global_vlan_enable) {
+ doubletag |= esw->ports[i].doubletag << i;
+ en_vlan |= 1 << i;
+ untag |= esw->ports[i].untag << i;
+ pvid = esw->ports[i].pvid;
+ } else {
+ int x = esw->alt_vlan_disable ? 0 : 1;
+ doubletag |= x << i;
+ en_vlan |= x << i;
+ untag |= x << i;
+ pvid = 0;
+ }
+ esw_set_pvid(esw, i, pvid);
+ if (i < RT305X_ESW_NUM_LEDS)
+ esw_w32(esw, esw->ports[i].led,
+ RT305X_ESW_REG_P0LED + 4*i);
+ }
+
+ esw_set_gsc(esw);
+ esw_set_port_disable(esw, disable);
+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
+ (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
+ RT305X_ESW_SGC2_DOUBLE_TAG_S),
+ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
+ esw_rmw(esw, RT305X_ESW_REG_PFC1,
+ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
+ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
+ esw_rmw(esw, RT305X_ESW_REG_POC2,
+ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
+ untag << RT305X_ESW_POC2_UNTAG_EN_S);
+
+ if (!esw->global_vlan_enable) {
+ /*
+ * Still need to put all ports into vlan 0 or they'll be
+ * isolated.
+ * NOTE: vlan 0 is special, no vlan tag is prepended
+ */
+ esw_set_vlan_id(esw, 0, 0);
+ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
+ }
+
+ return 0;
+}
+
+static int esw_reset_switch(struct switch_dev *dev)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ esw->global_vlan_enable = 0;
+ memset(esw->ports, 0, sizeof(esw->ports));
+ memset(esw->vlans, 0, sizeof(esw->vlans));
+ esw_hw_init(esw);
+
+ return 0;
+}
+
+static int esw_get_vlan_enable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ val->value.i = esw->global_vlan_enable;
+
+ return 0;
+}
+
+static int esw_set_vlan_enable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ esw->global_vlan_enable = val->value.i != 0;
+
+ return 0;
+}
+
+static int esw_get_alt_vlan_disable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ val->value.i = esw->alt_vlan_disable;
+
+ return 0;
+}
+
+static int esw_set_alt_vlan_disable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ esw->alt_vlan_disable = val->value.i != 0;
+
+ return 0;
+}
+
+static int
+rt305x_esw_set_bc_status(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
+
+ return 0;
+}
+
+static int
+rt305x_esw_get_bc_status(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ val->value.i = esw->bc_storm_protect;
+
+ return 0;
+}
+
+static int
+rt305x_esw_set_led_freq(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
+
+ return 0;
+}
+
+static int
+rt305x_esw_get_led_freq(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ val->value.i = esw->led_frequency;
+
+ return 0;
+}
+
+static int esw_get_port_link(struct switch_dev *dev,
+ int port,
+ struct switch_port_link *link)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ u32 speed, poa;
+
+ if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
+
+ link->link = (poa >> RT305X_ESW_LINK_S) & 1;
+ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
+ if (port < RT305X_ESW_NUM_LEDS) {
+ speed = (poa >> RT305X_ESW_SPD_S) & 1;
+ } else {
+ if (port == RT305X_ESW_NUM_PORTS - 1)
+ poa >>= 1;
+ speed = (poa >> RT305X_ESW_SPD_S) & 3;
+ }
+ switch (speed) {
+ case 0:
+ link->speed = SWITCH_PORT_SPEED_10;
+ break;
+ case 1:
+ link->speed = SWITCH_PORT_SPEED_100;
+ break;
+ case 2:
+ case 3: /* forced gige speed can be 2 or 3 */
+ link->speed = SWITCH_PORT_SPEED_1000;
+ break;
+ default:
+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int esw_get_port_bool(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int idx = val->port_vlan;
+ u32 x, reg, shift;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ switch (attr->id) {
+ case RT305X_ESW_ATTR_PORT_DISABLE:
+ reg = RT305X_ESW_REG_POC0;
+ shift = RT305X_ESW_POC0_DIS_PORT_S;
+ break;
+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
+ reg = RT305X_ESW_REG_SGC2;
+ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
+ break;
+ case RT305X_ESW_ATTR_PORT_UNTAG:
+ reg = RT305X_ESW_REG_POC2;
+ shift = RT305X_ESW_POC2_UNTAG_EN_S;
+ break;
+ case RT305X_ESW_ATTR_PORT_LAN:
+ reg = RT305X_ESW_REG_SGC2;
+ shift = RT305X_ESW_SGC2_LAN_PMAP_S;
+ if (idx >= RT305X_ESW_NUM_LANWAN)
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ x = esw_r32(esw, reg);
+ val->value.i = (x >> (idx + shift)) & 1;
+
+ return 0;
+}
+
+static int esw_set_port_bool(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int idx = val->port_vlan;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
+ val->value.i < 0 || val->value.i > 1)
+ return -EINVAL;
+
+ switch (attr->id) {
+ case RT305X_ESW_ATTR_PORT_DISABLE:
+ esw->ports[idx].disable = val->value.i;
+ break;
+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
+ esw->ports[idx].doubletag = val->value.i;
+ break;
+ case RT305X_ESW_ATTR_PORT_UNTAG:
+ esw->ports[idx].untag = val->value.i;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int esw_get_port_recv_badgood(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int idx = val->port_vlan;
+ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
+ u32 reg;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
+ return -EINVAL;
+ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
+ val->value.i = (reg >> shift) & 0xffff;
+
+ return 0;
+}
+
+static int
+esw_get_port_tr_badgood(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ int idx = val->port_vlan;
+ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
+ u32 reg;
+
+ if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN) && (ralink_soc != MT762X_SOC_MT7688))
+ return -EINVAL;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
+ return -EINVAL;
+
+ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
+ val->value.i = (reg >> shift) & 0xffff;
+
+ return 0;
+}
+
+static int esw_get_port_led(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int idx = val->port_vlan;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
+ idx >= RT305X_ESW_NUM_LEDS)
+ return -EINVAL;
+
+ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
+
+ return 0;
+}
+
+static int esw_set_port_led(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int idx = val->port_vlan;
+
+ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
+ return -EINVAL;
+
+ esw->ports[idx].led = val->value.i;
+
+ return 0;
+}
+
+static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ if (port >= RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ *val = esw_get_pvid(esw, port);
+
+ return 0;
+}
+
+static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+
+ if (port >= RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ esw->ports[port].pvid = val;
+
+ return 0;
+}
+
+static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ u32 vmsc, poc2;
+ int vlan_idx = -1;
+ int i;
+
+ val->len = 0;
+
+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
+ return -EINVAL;
+
+ /* valid vlan? */
+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
+ if (esw_get_vlan_id(esw, i) == val->port_vlan &&
+ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
+ vlan_idx = i;
+ break;
+ }
+ }
+
+ if (vlan_idx == -1)
+ return -EINVAL;
+
+ vmsc = esw_get_vmsc(esw, vlan_idx);
+ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
+
+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
+ struct switch_port *p;
+ int port_mask = 1 << i;
+
+ if (!(vmsc & port_mask))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
+ p->flags = 0;
+ else
+ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
+ }
+
+ return 0;
+}
+
+static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
+ int ports;
+ int vlan_idx = -1;
+ int i;
+
+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
+ val->len > RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ /* one of the already defined vlans? */
+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
+ if (esw->vlans[i].vid == val->port_vlan &&
+ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
+ vlan_idx = i;
+ break;
+ }
+ }
+
+ /* select a free slot */
+ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
+ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
+ vlan_idx = i;
+ }
+
+ /* bail if all slots are in use */
+ if (vlan_idx == -1)
+ return -EINVAL;
+
+ ports = RT305X_ESW_PORTS_NONE;
+ for (i = 0; i < val->len; i++) {
+ struct switch_port *p = &val->value.ports[i];
+ int port_mask = 1 << p->id;
+ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
+
+ if (p->id >= RT305X_ESW_NUM_PORTS)
+ return -EINVAL;
+
+ ports |= port_mask;
+ esw->ports[p->id].untag = untagged;
+ }
+ esw->vlans[vlan_idx].ports = ports;
+ if (ports == RT305X_ESW_PORTS_NONE)
+ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
+ else
+ esw->vlans[vlan_idx].vid = val->port_vlan;
+
+ return 0;
+}
+
+static const struct switch_attr esw_global[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable_vlan",
+ .description = "VLAN mode (1:enabled)",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_ENABLE_VLAN,
+ .get = esw_get_vlan_enable,
+ .set = esw_set_vlan_enable,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "alternate_vlan_disable",
+ .description = "Use en_vlan instead of doubletag to disable"
+ " VLAN mode",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
+ .get = esw_get_alt_vlan_disable,
+ .set = esw_set_alt_vlan_disable,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "bc_storm_protect",
+ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
+ .max = 3,
+ .id = RT305X_ESW_ATTR_BC_STATUS,
+ .get = rt305x_esw_get_bc_status,
+ .set = rt305x_esw_set_bc_status,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "led_frequency",
+ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
+ .max = 3,
+ .id = RT305X_ESW_ATTR_LED_FREQ,
+ .get = rt305x_esw_get_led_freq,
+ .set = rt305x_esw_set_led_freq,
+ }
+};
+
+static const struct switch_attr esw_port[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "disable",
+ .description = "Port state (1:disabled)",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_PORT_DISABLE,
+ .get = esw_get_port_bool,
+ .set = esw_set_port_bool,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "doubletag",
+ .description = "Double tagging for incoming vlan packets "
+ "(1:enabled)",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
+ .get = esw_get_port_bool,
+ .set = esw_set_port_bool,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "untag",
+ .description = "Untag (1:strip outgoing vlan tag)",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_PORT_UNTAG,
+ .get = esw_get_port_bool,
+ .set = esw_set_port_bool,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "led",
+ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
+ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
+ " 8:100mact, 10:blink, 11:off, 12:on)",
+ .max = 15,
+ .id = RT305X_ESW_ATTR_PORT_LED,
+ .get = esw_get_port_led,
+ .set = esw_set_port_led,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "lan",
+ .description = "HW port group (0:wan, 1:lan)",
+ .max = 1,
+ .id = RT305X_ESW_ATTR_PORT_LAN,
+ .get = esw_get_port_bool,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "recv_bad",
+ .description = "Receive bad packet counter",
+ .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
+ .get = esw_get_port_recv_badgood,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "recv_good",
+ .description = "Receive good packet counter",
+ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
+ .get = esw_get_port_recv_badgood,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "tr_bad",
+
+ .description = "Transmit bad packet counter. rt5350 only",
+ .id = RT5350_ESW_ATTR_PORT_TR_BAD,
+ .get = esw_get_port_tr_badgood,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "tr_good",
+
+ .description = "Transmit good packet counter. rt5350 only",
+ .id = RT5350_ESW_ATTR_PORT_TR_GOOD,
+ .get = esw_get_port_tr_badgood,
+ },
+};
+
+static const struct switch_attr esw_vlan[] = {
+};
+
+static const struct switch_dev_ops esw_ops = {
+ .attr_global = {
+ .attr = esw_global,
+ .n_attr = ARRAY_SIZE(esw_global),
+ },
+ .attr_port = {
+ .attr = esw_port,
+ .n_attr = ARRAY_SIZE(esw_port),
+ },
+ .attr_vlan = {
+ .attr = esw_vlan,
+ .n_attr = ARRAY_SIZE(esw_vlan),
+ },
+ .get_vlan_ports = esw_get_vlan_ports,
+ .set_vlan_ports = esw_set_vlan_ports,
+ .get_port_pvid = esw_get_port_pvid,
+ .set_port_pvid = esw_set_port_pvid,
+ .get_port_link = esw_get_port_link,
+ .apply_config = esw_apply_config,
+ .reset_switch = esw_reset_switch,
+};
+
+static int esw_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct device_node *np = pdev->dev.of_node;
+ const __be32 *port_map, *port_disable, *reg_init;
+ struct switch_dev *swdev;
+ struct rt305x_esw *esw;
+ int ret;
+
+ esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
+ if (!esw)
+ return -ENOMEM;
+
+ esw->dev = &pdev->dev;
+ esw->irq = irq_of_parse_and_map(np, 0);
+ esw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!esw->base)
+ return -EADDRNOTAVAIL;
+
+ port_map = of_get_property(np, "mediatek,portmap", NULL);
+ if (port_map)
+ esw->port_map = be32_to_cpu(*port_map);
+
+ port_disable = of_get_property(np, "mediatek,portdisable", NULL);
+ if (port_disable)
+ esw->port_disable = be32_to_cpu(*port_disable);
+
+ reg_init = of_get_property(np, "ralink,fct2", NULL);
+ if (reg_init)
+ esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
+
+ reg_init = of_get_property(np, "ralink,fpa2", NULL);
+ if (reg_init)
+ esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
+
+ reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
+ if (reg_init)
+ esw->reg_led_polarity = be32_to_cpu(*reg_init);
+
+ swdev = &esw->swdev;
+ swdev->of_node = pdev->dev.of_node;
+ swdev->name = "rt305x-esw";
+ swdev->alias = "rt305x";
+ swdev->cpu_port = RT305X_ESW_PORT6;
+ swdev->ports = RT305X_ESW_NUM_PORTS;
+ swdev->vlans = RT305X_ESW_NUM_VIDS;
+ swdev->ops = &esw_ops;
+
+ ret = register_switch(swdev, NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "register_switch failed\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, esw);
+
+ spin_lock_init(&esw->reg_rw_lock);
+
+ esw_hw_init(esw);
+
+ reg_init = of_get_property(np, "ralink,rgmii", NULL);
+ if (reg_init && be32_to_cpu(*reg_init) == 1) {
+ /*
+ * External switch connected to RGMII interface.
+ * Unregister the switch device after initialization.
+ */
+ dev_err(&pdev->dev, "RGMII mode, not exporting switch device.\n");
+ unregister_switch(&esw->swdev);
+ platform_set_drvdata(pdev, NULL);
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
+ esw);
+
+ if (!ret) {
+ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+ }
+
+ return ret;
+}
+
+static int esw_remove(struct platform_device *pdev)
+{
+ struct rt305x_esw *esw = platform_get_drvdata(pdev);
+
+ if (esw) {
+ esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ralink_esw_match[] = {
+ { .compatible = "ralink,rt3050-esw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_esw_match);
+
+static struct platform_driver esw_driver = {
+ .probe = esw_probe,
+ .remove = esw_remove,
+ .driver = {
+ .name = "rt3050-esw",
+ .owner = THIS_MODULE,
+ .of_match_table = ralink_esw_match,
+ },
+};
+
+module_platform_driver(esw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
+MODULE_DESCRIPTION("Switch driver for RT305X SoC");
+MODULE_VERSION(MTK_FE_DRV_VERSION);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.h
new file mode 100644
index 0000000..b757e5d
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/esw_rt3050.h
@@ -0,0 +1,29 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef _RALINK_ESW_RT3052_H__
+#define _RALINK_ESW_RT3052_H__
+
+#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
+
+int __init mtk_switch_init(void);
+void mtk_switch_exit(void);
+
+#else
+
+static inline int __init mtk_switch_init(void) { return 0; }
+static inline void mtk_switch_exit(void) { }
+
+#endif
+#endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.c
new file mode 100644
index 0000000..9e65d5e
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.c
@@ -0,0 +1,233 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include "mtk_eth_soc.h"
+
+static const char fe_gdma_str[][ETH_GSTRING_LEN] = {
+#define _FE(x...) # x,
+FE_STAT_REG_DECLARE
+#undef _FE
+};
+
+static int fe_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ int err;
+
+ if (!priv->phy_dev)
+ goto out_gset;
+
+ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
+ err = phy_read_status(priv->phy_dev);
+ if (err)
+ goto out_gset;
+ }
+
+ return phy_ethtool_gset(priv->phy_dev, cmd);
+
+out_gset:
+ return -ENODEV;
+}
+
+static int fe_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if (!priv->phy_dev)
+ goto out_sset;
+
+ if (cmd->phy_address != priv->phy_dev->mdio.addr) {
+ if (priv->phy->phy_node[cmd->phy_address]) {
+ priv->phy_dev = priv->phy->phy[cmd->phy_address];
+ priv->phy_flags = FE_PHY_FLAG_PORT;
+ } else if (priv->mii_bus && mdiobus_get_phy(priv->mii_bus, cmd->phy_address)) {
+ priv->phy_dev = mdiobus_get_phy(priv->mii_bus, cmd->phy_address);
+ priv->phy_flags = FE_PHY_FLAG_ATTACH;
+ } else {
+ goto out_sset;
+ }
+ }
+
+ return phy_ethtool_sset(priv->phy_dev, cmd);
+
+out_sset:
+ return -ENODEV;
+}
+
+static void fe_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct fe_soc_data *soc = priv->soc;
+
+ strlcpy(info->driver, priv->device->driver->name, sizeof(info->driver));
+ strlcpy(info->version, MTK_FE_DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info, dev_name(priv->device), sizeof(info->bus_info));
+
+ if (soc->reg_table[FE_REG_FE_COUNTER_BASE])
+ info->n_stats = ARRAY_SIZE(fe_gdma_str);
+}
+
+static u32 fe_get_msglevel(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+static void fe_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ priv->msg_enable = value;
+}
+
+static int fe_nway_reset(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if (!priv->phy_dev)
+ goto out_nway_reset;
+
+ return genphy_restart_aneg(priv->phy_dev);
+
+out_nway_reset:
+ return -EOPNOTSUPP;
+}
+
+static u32 fe_get_link(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ int err;
+
+ if (!priv->phy_dev)
+ goto out_get_link;
+
+ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
+ err = genphy_update_link(priv->phy_dev);
+ if (err)
+ goto out_get_link;
+ }
+
+ return priv->phy_dev->link;
+
+out_get_link:
+ return ethtool_op_get_link(dev);
+}
+
+static int fe_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if ((ring->tx_pending < 2) ||
+ (ring->rx_pending < 2) ||
+ (ring->rx_pending > MAX_DMA_DESC) ||
+ (ring->tx_pending > MAX_DMA_DESC))
+ return -EINVAL;
+
+ dev->netdev_ops->ndo_stop(dev);
+
+ priv->tx_ring.tx_ring_size = BIT(fls(ring->tx_pending) - 1);
+ priv->rx_ring.rx_ring_size = BIT(fls(ring->rx_pending) - 1);
+
+ dev->netdev_ops->ndo_open(dev);
+
+ return 0;
+}
+
+static void fe_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ ring->rx_max_pending = MAX_DMA_DESC;
+ ring->tx_max_pending = MAX_DMA_DESC;
+ ring->rx_pending = priv->rx_ring.rx_ring_size;
+ ring->tx_pending = priv->tx_ring.tx_ring_size;
+}
+
+static void fe_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ switch (stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, *fe_gdma_str, sizeof(fe_gdma_str));
+ break;
+ }
+}
+
+static int fe_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(fe_gdma_str);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void fe_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct fe_hw_stats *hwstats = priv->hw_stats;
+ u64 *data_src, *data_dst;
+ unsigned int start;
+ int i;
+
+ if (netif_running(dev) && netif_device_present(dev)) {
+ if (spin_trylock(&hwstats->stats_lock)) {
+ fe_stats_update(priv);
+ spin_unlock(&hwstats->stats_lock);
+ }
+ }
+
+ do {
+ data_src = &hwstats->tx_bytes;
+ data_dst = data;
+ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
+
+ for (i = 0; i < ARRAY_SIZE(fe_gdma_str); i++)
+ *data_dst++ = *data_src++;
+
+ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
+}
+
+static struct ethtool_ops fe_ethtool_ops = {
+ .get_settings = fe_get_settings,
+ .set_settings = fe_set_settings,
+ .get_drvinfo = fe_get_drvinfo,
+ .get_msglevel = fe_get_msglevel,
+ .set_msglevel = fe_set_msglevel,
+ .nway_reset = fe_nway_reset,
+ .get_link = fe_get_link,
+ .set_ringparam = fe_set_ringparam,
+ .get_ringparam = fe_get_ringparam,
+};
+
+void fe_set_ethtool_ops(struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+ struct fe_soc_data *soc = priv->soc;
+
+ if (soc->reg_table[FE_REG_FE_COUNTER_BASE]) {
+ fe_ethtool_ops.get_strings = fe_get_strings;
+ fe_ethtool_ops.get_sset_count = fe_get_sset_count;
+ fe_ethtool_ops.get_ethtool_stats = fe_get_ethtool_stats;
+ }
+
+ netdev->ethtool_ops = &fe_ethtool_ops;
+}
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.h
new file mode 100644
index 0000000..6fd16f0
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/ethtool.h
@@ -0,0 +1,22 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef FE_ETHTOOL_H
+#define FE_ETHTOOL_H
+
+#include <linux/ethtool.h>
+
+void fe_set_ethtool_ops(struct net_device *netdev);
+
+#endif /* FE_ETHTOOL_H */
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.c
new file mode 100644
index 0000000..b675ad0
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.c
@@ -0,0 +1,259 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#include <ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+
+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
+{
+ iowrite32(val, gsw->base + reg);
+}
+
+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
+{
+ return ioread32(gsw->base + reg);
+}
+
+static irqreturn_t gsw_interrupt_mt7620(int irq, void *_priv)
+{
+ struct fe_priv *priv = (struct fe_priv *)_priv;
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ u32 status;
+ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
+
+ status = mtk_switch_r32(gsw, GSW_REG_ISR);
+ if (status & PORT_IRQ_ST_CHG)
+ for (i = 0; i <= max; i++) {
+ u32 status = mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i));
+ int link = status & 0x1;
+
+ if (link != priv->link[i])
+ mt7620_print_link_state(priv, i, link,
+ (status >> 2) & 3,
+ (status & 0x2));
+
+ priv->link[i] = link;
+ }
+ mt7620_handle_carrier(priv);
+ mtk_switch_w32(gsw, status, GSW_REG_ISR);
+
+ return IRQ_HANDLED;
+}
+
+static void mt7620_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
+{
+ u32 is_BGA = (rt_sysc_r32(0x0c) >> 16) & 1;
+
+ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
+
+ /* Enable MIB stats */
+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_MIB_CNT_EN) | (1 << 1), GSW_REG_MIB_CNT_EN);
+
+ if (of_property_read_bool(np, "mediatek,mt7530")) {
+ u32 val;
+
+ /* turn off ephy and set phy base addr to 12 */
+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) |
+ (0x1f << 24) | (0xc << 16),
+ GSW_REG_GPC1);
+
+ /* set MT7530 central align */
+ val = mt7530_mdio_r32(gsw, 0x7830);
+ val &= ~BIT(0);
+ val |= BIT(1);
+ mt7530_mdio_w32(gsw, 0x7830, val);
+
+ val = mt7530_mdio_r32(gsw, 0x7a40);
+ val &= ~BIT(30);
+ mt7530_mdio_w32(gsw, 0x7a40, val);
+
+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
+ } else {
+ /* global page 4 */
+ _mt7620_mii_write(gsw, 1, 31, 0x4000);
+
+ _mt7620_mii_write(gsw, 1, 17, 0x7444);
+ if (is_BGA)
+ _mt7620_mii_write(gsw, 1, 19, 0x0114);
+ else
+ _mt7620_mii_write(gsw, 1, 19, 0x0117);
+
+ _mt7620_mii_write(gsw, 1, 22, 0x10cf);
+ _mt7620_mii_write(gsw, 1, 25, 0x6212);
+ _mt7620_mii_write(gsw, 1, 26, 0x0777);
+ _mt7620_mii_write(gsw, 1, 29, 0x4000);
+ _mt7620_mii_write(gsw, 1, 28, 0xc077);
+ _mt7620_mii_write(gsw, 1, 24, 0x0000);
+
+ /* global page 3 */
+ _mt7620_mii_write(gsw, 1, 31, 0x3000);
+ _mt7620_mii_write(gsw, 1, 17, 0x4838);
+
+ /* global page 2 */
+ _mt7620_mii_write(gsw, 1, 31, 0x2000);
+ if (is_BGA) {
+ _mt7620_mii_write(gsw, 1, 21, 0x0515);
+ _mt7620_mii_write(gsw, 1, 22, 0x0053);
+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
+ _mt7620_mii_write(gsw, 1, 24, 0x0aaf);
+ _mt7620_mii_write(gsw, 1, 25, 0x0fad);
+ _mt7620_mii_write(gsw, 1, 26, 0x0fc1);
+ } else {
+ _mt7620_mii_write(gsw, 1, 21, 0x0517);
+ _mt7620_mii_write(gsw, 1, 22, 0x0fd2);
+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
+ _mt7620_mii_write(gsw, 1, 24, 0x0aab);
+ _mt7620_mii_write(gsw, 1, 25, 0x00ae);
+ _mt7620_mii_write(gsw, 1, 26, 0x0fff);
+ }
+ /* global page 1 */
+ _mt7620_mii_write(gsw, 1, 31, 0x1000);
+ _mt7620_mii_write(gsw, 1, 17, 0xe7f8);
+ }
+
+ /* global page 0 */
+ _mt7620_mii_write(gsw, 1, 31, 0x8000);
+ _mt7620_mii_write(gsw, 0, 30, 0xa000);
+ _mt7620_mii_write(gsw, 1, 30, 0xa000);
+ _mt7620_mii_write(gsw, 2, 30, 0xa000);
+ _mt7620_mii_write(gsw, 3, 30, 0xa000);
+
+ _mt7620_mii_write(gsw, 0, 4, 0x05e1);
+ _mt7620_mii_write(gsw, 1, 4, 0x05e1);
+ _mt7620_mii_write(gsw, 2, 4, 0x05e1);
+ _mt7620_mii_write(gsw, 3, 4, 0x05e1);
+
+ /* global page 2 */
+ _mt7620_mii_write(gsw, 1, 31, 0xa000);
+ _mt7620_mii_write(gsw, 0, 16, 0x1111);
+ _mt7620_mii_write(gsw, 1, 16, 0x1010);
+ _mt7620_mii_write(gsw, 2, 16, 0x1515);
+ _mt7620_mii_write(gsw, 3, 16, 0x0f0f);
+
+ /* CPU Port6 Force Link 1G, FC ON */
+ mtk_switch_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
+
+ /* Set Port 6 as CPU Port */
+ mtk_switch_w32(gsw, 0x7f7f7fe0, 0x0010);
+
+ /* setup port 4 */
+ if (gsw->port4 == PORT4_EPHY) {
+ u32 val = rt_sysc_r32(SYSC_REG_CFG1);
+
+ val |= 3 << 14;
+ rt_sysc_w32(val, SYSC_REG_CFG1);
+ _mt7620_mii_write(gsw, 4, 30, 0xa000);
+ _mt7620_mii_write(gsw, 4, 4, 0x05e1);
+ _mt7620_mii_write(gsw, 4, 16, 0x1313);
+ pr_info("gsw: setting port4 to ephy mode\n");
+ }
+}
+
+static const struct of_device_id mediatek_gsw_match[] = {
+ { .compatible = "mediatek,mt7620-gsw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
+
+int mtk_gsw_init(struct fe_priv *priv)
+{
+ struct device_node *np = priv->switch_np;
+ struct platform_device *pdev = of_find_device_by_node(np);
+ struct mt7620_gsw *gsw;
+
+ if (!pdev)
+ return -ENODEV;
+
+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
+ return -EINVAL;
+
+ gsw = platform_get_drvdata(pdev);
+ priv->soc->swpriv = gsw;
+
+ mt7620_hw_init(gsw, np);
+
+ if (gsw->irq) {
+ request_irq(gsw->irq, gsw_interrupt_mt7620, 0,
+ "gsw", priv);
+ mtk_switch_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
+ }
+
+ return 0;
+}
+
+static int mt7620_gsw_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const char *port4 = NULL;
+ struct mt7620_gsw *gsw;
+ struct device_node *np = pdev->dev.of_node;
+
+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
+ if (!gsw)
+ return -ENOMEM;
+
+ gsw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!gsw->base)
+ return -EADDRNOTAVAIL;
+
+ gsw->dev = &pdev->dev;
+
+ of_property_read_string(np, "mediatek,port4", &port4);
+ if (port4 && !strcmp(port4, "ephy"))
+ gsw->port4 = PORT4_EPHY;
+ else if (port4 && !strcmp(port4, "gmac"))
+ gsw->port4 = PORT4_EXT;
+ else
+ gsw->port4 = PORT4_EPHY;
+
+ gsw->irq = platform_get_irq(pdev, 0);
+
+ platform_set_drvdata(pdev, gsw);
+
+ return 0;
+}
+
+static int mt7620_gsw_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gsw_driver = {
+ .probe = mt7620_gsw_probe,
+ .remove = mt7620_gsw_remove,
+ .driver = {
+ .name = "mt7620-gsw",
+ .owner = THIS_MODULE,
+ .of_match_table = mediatek_gsw_match,
+ },
+};
+
+module_platform_driver(gsw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7620 SoC");
+MODULE_VERSION(MTK_FE_DRV_VERSION);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h
new file mode 100644
index 0000000..77dd2ed
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7620.h
@@ -0,0 +1,121 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef _RALINK_GSW_MT7620_H__
+#define _RALINK_GSW_MT7620_H__
+
+#define GSW_REG_PHY_TIMEOUT (5 * HZ)
+
+#ifdef CONFIG_SOC_MT7621
+#define MT7620A_GSW_REG_PIAC 0x0004
+#else
+#define MT7620A_GSW_REG_PIAC 0x7004
+#endif
+
+#define GSW_NUM_VLANS 16
+#define GSW_NUM_VIDS 4096
+#define GSW_NUM_PORTS 7
+#define GSW_PORT6 6
+
+#define GSW_MDIO_ACCESS BIT(31)
+#define GSW_MDIO_READ BIT(19)
+#define GSW_MDIO_WRITE BIT(18)
+#define GSW_MDIO_START BIT(16)
+#define GSW_MDIO_ADDR_SHIFT 20
+#define GSW_MDIO_REG_SHIFT 25
+
+#define GSW_REG_MIB_CNT_EN 0x4000
+
+#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
+#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
+#define GSW_REG_SMACCR0 0x3fE4
+#define GSW_REG_SMACCR1 0x3fE8
+#define GSW_REG_CKGCR 0x3ff0
+
+#define GSW_REG_IMR 0x7008
+#define GSW_REG_ISR 0x700c
+#define GSW_REG_GPC1 0x7014
+
+#define SYSC_REG_CHIP_REV_ID 0x0c
+#define SYSC_REG_CFG1 0x14
+#define RST_CTRL_MCM BIT(2)
+#define SYSC_PAD_RGMII2_MDIO 0x58
+#define SYSC_GPIO_MODE 0x60
+
+#define PORT_IRQ_ST_CHG 0x7f
+
+#ifdef CONFIG_SOC_MT7621
+#define ESW_PHY_POLLING 0x0000
+#else
+#define ESW_PHY_POLLING 0x7000
+#endif
+
+#define PMCR_IPG BIT(18)
+#define PMCR_MAC_MODE BIT(16)
+#define PMCR_FORCE BIT(15)
+#define PMCR_TX_EN BIT(14)
+#define PMCR_RX_EN BIT(13)
+#define PMCR_BACKOFF BIT(9)
+#define PMCR_BACKPRES BIT(8)
+#define PMCR_RX_FC BIT(5)
+#define PMCR_TX_FC BIT(4)
+#define PMCR_SPEED(_x) (_x << 2)
+#define PMCR_DUPLEX BIT(1)
+#define PMCR_LINK BIT(0)
+
+#define PHY_AN_EN BIT(31)
+#define PHY_PRE_EN BIT(30)
+#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
+
+
+enum {
+ /* Global attributes. */
+ GSW_ATTR_ENABLE_VLAN,
+ /* Port attributes. */
+ GSW_ATTR_PORT_UNTAG,
+};
+
+enum {
+ PORT4_EPHY = 0,
+ PORT4_EXT,
+};
+
+struct mt7620_gsw {
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+ int port4;
+ unsigned long int autopoll;
+};
+
+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg);
+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg);
+int mtk_gsw_init(struct fe_priv *priv);
+
+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
+void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
+int mt7620_has_carrier(struct fe_priv *priv);
+void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
+ int speed, int duplex);
+
+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val);
+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg);
+
+u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
+ u32 phy_register, u32 write_data);
+u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
+void mt7620_handle_carrier(struct fe_priv *priv);
+
+#endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c
new file mode 100644
index 0000000..8e2fbd2
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/gsw_mt7621.c
@@ -0,0 +1,285 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#include <ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+
+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
+{
+ iowrite32(val, gsw->base + reg);
+}
+
+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
+{
+ return ioread32(gsw->base + reg);
+}
+
+static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
+{
+ struct fe_priv *priv = (struct fe_priv *)_priv;
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ u32 reg, i;
+
+ reg = mt7530_mdio_r32(gsw, 0x700c);
+
+ for (i = 0; i < 5; i++)
+ if (reg & BIT(i)) {
+ unsigned int link;
+
+ link = mt7530_mdio_r32(gsw,
+ 0x3008 + (i * 0x100)) & 0x1;
+
+ if (link != priv->link[i]) {
+ priv->link[i] = link;
+ if (link)
+ netdev_info(priv->netdev,
+ "port %d link up\n", i);
+ else
+ netdev_info(priv->netdev,
+ "port %d link down\n", i);
+ }
+ }
+
+ mt7620_handle_carrier(priv);
+ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
+
+ return IRQ_HANDLED;
+}
+
+static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
+{
+ u32 i;
+ u32 val;
+
+ /* wardware reset the switch */
+ fe_reset(RST_CTRL_MCM);
+ mdelay(10);
+
+ /* reduce RGMII2 PAD driving strength */
+ rt_sysc_m32(3 << 4, 0, SYSC_PAD_RGMII2_MDIO);
+
+ /* gpio mux - RGMII1=Normal mode */
+ rt_sysc_m32(BIT(14), 0, SYSC_GPIO_MODE);
+
+ /* set GMAC1 RGMII mode */
+ rt_sysc_m32(3 << 12, 0, SYSC_REG_CFG1);
+
+ /* enable MDIO to control MT7530 */
+ rt_sysc_m32(3 << 12, 0, SYSC_GPIO_MODE);
+
+ /* turn off all PHYs */
+ for (i = 0; i <= 4; i++) {
+ val = _mt7620_mii_read(gsw, i, 0x0);
+ val |= BIT(11);
+ _mt7620_mii_write(gsw, i, 0x0, val);
+ }
+
+ /* reset the switch */
+ mt7530_mdio_w32(gsw, 0x7000, 0x3);
+ usleep_range(10, 20);
+
+ if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) {
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ mtk_switch_w32(gsw, 0x2105e30b, 0x100);
+ mt7530_mdio_w32(gsw, 0x3600, 0x5e30b);
+ } else {
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ mtk_switch_w32(gsw, 0x2105e33b, 0x100);
+ mt7530_mdio_w32(gsw, 0x3600, 0x5e33b);
+ }
+
+ /* (GE2, Link down) */
+ mtk_switch_w32(gsw, 0x8000, 0x200);
+
+ /* Enable Port 6, P5 as GMAC5, P5 disable */
+ val = mt7530_mdio_r32(gsw, 0x7804);
+ val &= ~BIT(8);
+ val |= BIT(6) | BIT(13) | BIT(16);
+ mt7530_mdio_w32(gsw, 0x7804, val);
+
+ val = rt_sysc_r32(0x10);
+ val = (val >> 6) & 0x7;
+ if (val >= 6) {
+ /* 25Mhz Xtal - do nothing */
+ } else if (val >= 3) {
+ /* 40Mhz */
+
+ /* disable MT7530 core clock */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x410);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x0);
+
+ /* disable MT7530 PLL */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x2020);
+
+ /* for MT7530 core clock = 500Mhz */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40e);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x119);
+
+ /* enable MT7530 PLL */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x2820);
+
+ usleep_range(20, 40);
+
+ /* enable MT7530 core clock */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x410);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ } else {
+ /* 20Mhz Xtal - TODO */
+ }
+
+ /* RGMII */
+ _mt7620_mii_write(gsw, 0, 14, 0x1);
+
+ /* set MT7530 central align */
+ val = mt7530_mdio_r32(gsw, 0x7830);
+ val &= ~BIT(0);
+ val |= BIT(1);
+ mt7530_mdio_w32(gsw, 0x7830, val);
+ val = mt7530_mdio_r32(gsw, 0x7a40);
+ val &= ~BIT(30);
+ mt7530_mdio_w32(gsw, 0x7a40, val);
+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
+
+ /* delay setting for 10/1000M */
+ mt7530_mdio_w32(gsw, 0x7b00, 0x102);
+ mt7530_mdio_w32(gsw, 0x7b04, 0x14);
+
+ /* lower Tx Driving*/
+ mt7530_mdio_w32(gsw, 0x7a54, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a5c, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a64, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a6c, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a74, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a7c, 0x44);
+
+ /* turn on all PHYs */
+ for (i = 0; i <= 4; i++) {
+ val = _mt7620_mii_read(gsw, i, 0);
+ val &= ~BIT(11);
+ _mt7620_mii_write(gsw, i, 0, val);
+ }
+
+ /* enable irq */
+ val = mt7530_mdio_r32(gsw, 0x7808);
+ val |= 3 << 16;
+ mt7530_mdio_w32(gsw, 0x7808, val);
+}
+
+static const struct of_device_id mediatek_gsw_match[] = {
+ { .compatible = "mediatek,mt7621-gsw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
+
+int mtk_gsw_init(struct fe_priv *priv)
+{
+ struct device_node *np = priv->switch_np;
+ struct platform_device *pdev = of_find_device_by_node(np);
+ struct mt7620_gsw *gsw;
+
+ if (!pdev)
+ return -ENODEV;
+
+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
+ return -EINVAL;
+
+ gsw = platform_get_drvdata(pdev);
+ priv->soc->swpriv = gsw;
+
+ mt7621_hw_init(gsw, np);
+
+ if (gsw->irq) {
+ request_irq(gsw->irq, gsw_interrupt_mt7621, 0,
+ "gsw", priv);
+ mt7530_mdio_w32(gsw, 0x7008, 0x1f);
+ }
+
+ return 0;
+}
+
+static int mt7621_gsw_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const char *port4 = NULL;
+ struct mt7620_gsw *gsw;
+ struct device_node *np;
+
+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
+ if (!gsw)
+ return -ENOMEM;
+
+ gsw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!gsw->base)
+ return -EADDRNOTAVAIL;
+
+ gsw->dev = &pdev->dev;
+
+ of_property_read_string(np, "mediatek,port4", &port4);
+ if (port4 && !strcmp(port4, "ephy"))
+ gsw->port4 = PORT4_EPHY;
+ else if (port4 && !strcmp(port4, "gmac"))
+ gsw->port4 = PORT4_EXT;
+ else
+ gsw->port4 = PORT4_EPHY;
+
+ gsw->irq = platform_get_irq(pdev, 0);
+
+ platform_set_drvdata(pdev, gsw);
+
+ return 0;
+}
+
+static int mt7621_gsw_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gsw_driver = {
+ .probe = mt7621_gsw_probe,
+ .remove = mt7621_gsw_remove,
+ .driver = {
+ .name = "mt7621-gsw",
+ .owner = THIS_MODULE,
+ .of_match_table = mediatek_gsw_match,
+ },
+};
+
+module_platform_driver(gsw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7621 SoC");
+MODULE_VERSION(MTK_FE_DRV_VERSION);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.c
new file mode 100644
index 0000000..d3798bb
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.c
@@ -0,0 +1,259 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio.h"
+
+static int fe_mdio_reset(struct mii_bus *bus)
+{
+ /* TODO */
+ return 0;
+}
+
+static void fe_phy_link_adjust(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&priv->phy->lock, flags);
+ for (i = 0; i < 8; i++) {
+ if (priv->phy->phy_node[i]) {
+ struct phy_device *phydev = priv->phy->phy[i];
+ int status_change = 0;
+
+ if (phydev->link)
+ if (priv->phy->duplex[i] != phydev->duplex ||
+ priv->phy->speed[i] != phydev->speed)
+ status_change = 1;
+
+ if (phydev->link != priv->link[i])
+ status_change = 1;
+
+ switch (phydev->speed) {
+ case SPEED_1000:
+ case SPEED_100:
+ case SPEED_10:
+ priv->link[i] = phydev->link;
+ priv->phy->duplex[i] = phydev->duplex;
+ priv->phy->speed[i] = phydev->speed;
+
+ if (status_change &&
+ priv->soc->mdio_adjust_link)
+ priv->soc->mdio_adjust_link(priv, i);
+ break;
+ }
+ }
+ }
+}
+
+int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
+{
+ const __be32 *_port = NULL;
+ struct phy_device *phydev;
+ int phy_mode, port;
+
+ _port = of_get_property(phy_node, "reg", NULL);
+
+ if (!_port || (be32_to_cpu(*_port) >= 0x20)) {
+ pr_err("%s: invalid port id\n", phy_node->name);
+ return -EINVAL;
+ }
+ port = be32_to_cpu(*_port);
+ phy_mode = of_get_phy_mode(phy_node);
+ if (phy_mode < 0) {
+ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
+ priv->phy->phy_node[port] = NULL;
+ return -EINVAL;
+ }
+
+ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
+ 0, phy_mode);
+ if (IS_ERR(phydev)) {
+ dev_err(priv->device, "could not connect to PHY\n");
+ priv->phy->phy_node[port] = NULL;
+ return PTR_ERR(phydev);
+ }
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ phydev->advertising = phydev->supported;
+ phydev->no_auto_carrier_off = 1;
+
+ dev_info(priv->device,
+ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
+ port, dev_name(&phydev->mdio.dev), phydev->phy_id,
+ phydev->drv->name);
+
+ priv->phy->phy[port] = phydev;
+ priv->link[port] = 0;
+
+ return 0;
+}
+
+static void phy_init(struct fe_priv *priv, struct phy_device *phy)
+{
+ phy_attach(priv->netdev, dev_name(&phy->mdio.dev), PHY_INTERFACE_MODE_MII);
+
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = 0;
+ phy->duplex = 0;
+ phy->supported &= PHY_BASIC_FEATURES;
+ phy->advertising = phy->supported | ADVERTISED_Autoneg;
+
+ phy_start_aneg(phy);
+}
+
+static int fe_phy_connect(struct fe_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (priv->phy->phy_node[i]) {
+ if (!priv->phy_dev) {
+ priv->phy_dev = priv->phy->phy[i];
+ priv->phy_flags = FE_PHY_FLAG_PORT;
+ }
+ } else if (priv->mii_bus && mdiobus_get_phy(priv->mii_bus, i)) {
+ phy_init(priv, mdiobus_get_phy(priv->mii_bus, i));
+ if (!priv->phy_dev) {
+ priv->phy_dev = mdiobus_get_phy(priv->mii_bus, i);
+ priv->phy_flags = FE_PHY_FLAG_ATTACH;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void fe_phy_disconnect(struct fe_priv *priv)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ if (priv->phy->phy_fixed[i]) {
+ spin_lock_irqsave(&priv->phy->lock, flags);
+ priv->link[i] = 0;
+ if (priv->soc->mdio_adjust_link)
+ priv->soc->mdio_adjust_link(priv, i);
+ spin_unlock_irqrestore(&priv->phy->lock, flags);
+ } else if (priv->phy->phy[i]) {
+ phy_disconnect(priv->phy->phy[i]);
+ } else if (priv->mii_bus && mdiobus_get_phy(priv->mii_bus, i)) {
+ phy_detach(mdiobus_get_phy(priv->mii_bus, i));
+ }
+}
+
+static void fe_phy_start(struct fe_priv *priv)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (priv->phy->phy_fixed[i]) {
+ spin_lock_irqsave(&priv->phy->lock, flags);
+ priv->link[i] = 1;
+ if (priv->soc->mdio_adjust_link)
+ priv->soc->mdio_adjust_link(priv, i);
+ spin_unlock_irqrestore(&priv->phy->lock, flags);
+ } else if (priv->phy->phy[i]) {
+ phy_start(priv->phy->phy[i]);
+ }
+ }
+}
+
+static void fe_phy_stop(struct fe_priv *priv)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ if (priv->phy->phy_fixed[i]) {
+ spin_lock_irqsave(&priv->phy->lock, flags);
+ priv->link[i] = 0;
+ if (priv->soc->mdio_adjust_link)
+ priv->soc->mdio_adjust_link(priv, i);
+ spin_unlock_irqrestore(&priv->phy->lock, flags);
+ } else if (priv->phy->phy[i]) {
+ phy_stop(priv->phy->phy[i]);
+ }
+}
+
+static struct fe_phy phy_ralink = {
+ .connect = fe_phy_connect,
+ .disconnect = fe_phy_disconnect,
+ .start = fe_phy_start,
+ .stop = fe_phy_stop,
+};
+
+int fe_mdio_init(struct fe_priv *priv)
+{
+ struct device_node *mii_np;
+ int err;
+
+ if (!priv->soc->mdio_read || !priv->soc->mdio_write)
+ return 0;
+
+ spin_lock_init(&phy_ralink.lock);
+ priv->phy = &phy_ralink;
+
+ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
+ if (!mii_np) {
+ dev_err(priv->device, "no %s child node found", "mdio-bus");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(mii_np)) {
+ err = 0;
+ goto err_put_node;
+ }
+
+ priv->mii_bus = mdiobus_alloc();
+ if (!priv->mii_bus) {
+ err = -ENOMEM;
+ goto err_put_node;
+ }
+
+ priv->mii_bus->name = "mdio";
+ priv->mii_bus->read = priv->soc->mdio_read;
+ priv->mii_bus->write = priv->soc->mdio_write;
+ priv->mii_bus->reset = fe_mdio_reset;
+ priv->mii_bus->priv = priv;
+ priv->mii_bus->parent = priv->device;
+
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
+ err = of_mdiobus_register(priv->mii_bus, mii_np);
+ if (err)
+ goto err_free_bus;
+
+ return 0;
+
+err_free_bus:
+ kfree(priv->mii_bus);
+err_put_node:
+ of_node_put(mii_np);
+ priv->mii_bus = NULL;
+ return err;
+}
+
+void fe_mdio_cleanup(struct fe_priv *priv)
+{
+ if (!priv->mii_bus)
+ return;
+
+ mdiobus_unregister(priv->mii_bus);
+ of_node_put(priv->mii_bus->dev.of_node);
+ kfree(priv->mii_bus);
+}
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.h
new file mode 100644
index 0000000..498cf14
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio.h
@@ -0,0 +1,27 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef _RALINK_MDIO_H__
+#define _RALINK_MDIO_H__
+
+#ifdef CONFIG_NET_MEDIATEK_MDIO
+int fe_mdio_init(struct fe_priv *priv);
+void fe_mdio_cleanup(struct fe_priv *priv);
+int fe_connect_phy_node(struct fe_priv *priv,
+ struct device_node *phy_node);
+#else
+static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
+#endif
+#endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_mt7620.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_mt7620.c
new file mode 100644
index 0000000..9efe789
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_mt7620.c
@@ -0,0 +1,168 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+#include "mdio.h"
+
+static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
+{
+ unsigned long t_start = jiffies;
+
+ while (1) {
+ if (!(mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
+ return 0;
+ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT))
+ break;
+ }
+
+ dev_err(gsw->dev, "mdio: MDIO timeout\n");
+ return -1;
+}
+
+u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
+ u32 phy_register, u32 write_data)
+{
+ if (mt7620_mii_busy_wait(gsw))
+ return -1;
+
+ write_data &= 0xffff;
+
+ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
+ (phy_register << GSW_MDIO_REG_SHIFT) |
+ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
+ MT7620A_GSW_REG_PIAC);
+
+ if (mt7620_mii_busy_wait(gsw))
+ return -1;
+
+ return 0;
+}
+
+u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg)
+{
+ u32 d;
+
+ if (mt7620_mii_busy_wait(gsw))
+ return 0xffff;
+
+ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
+ (phy_reg << GSW_MDIO_REG_SHIFT) |
+ (phy_addr << GSW_MDIO_ADDR_SHIFT),
+ MT7620A_GSW_REG_PIAC);
+
+ if (mt7620_mii_busy_wait(gsw))
+ return 0xffff;
+
+ d = mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
+
+ return d;
+}
+
+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
+{
+ struct fe_priv *priv = bus->priv;
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+
+ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
+}
+
+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+ struct fe_priv *priv = bus->priv;
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+
+ return _mt7620_mii_read(gsw, phy_addr, phy_reg);
+}
+
+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val)
+{
+ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
+ _mt7620_mii_write(gsw, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
+ _mt7620_mii_write(gsw, 0x1f, 0x10, val >> 16);
+}
+
+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg)
+{
+ u16 high, low;
+
+ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
+ low = _mt7620_mii_read(gsw, 0x1f, (reg >> 2) & 0xf);
+ high = _mt7620_mii_read(gsw, 0x1f, 0x10);
+
+ return (high << 16) | (low & 0xffff);
+}
+
+static unsigned char *fe_speed_str(int speed)
+{
+ switch (speed) {
+ case 2:
+ case SPEED_1000:
+ return "1000";
+ case 1:
+ case SPEED_100:
+ return "100";
+ case 0:
+ case SPEED_10:
+ return "10";
+ }
+
+ return "? ";
+}
+
+int mt7620_has_carrier(struct fe_priv *priv)
+{
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ int i;
+
+ for (i = 0; i < GSW_PORT6; i++)
+ if (mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
+ return 1;
+ return 0;
+}
+
+
+void mt7620_handle_carrier(struct fe_priv *priv)
+{
+ if (!priv->phy)
+ return;
+
+ if (mt7620_has_carrier(priv))
+ netif_carrier_on(priv->netdev);
+ else
+ netif_carrier_off(priv->netdev);
+}
+
+void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
+ int speed, int duplex)
+{
+ if (link)
+ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
+ port, fe_speed_str(speed),
+ (duplex) ? "Full" : "Half");
+ else
+ netdev_info(priv->netdev, "port %d link down\n", port);
+}
+
+void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
+{
+ mt7620_print_link_state(priv, port, priv->link[port],
+ priv->phy->speed[port],
+ (priv->phy->duplex[port] == DUPLEX_FULL));
+ mt7620_handle_carrier(priv);
+}
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.c
new file mode 100644
index 0000000..e72f8c7
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.c
@@ -0,0 +1,222 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+#include "mdio.h"
+
+#define FE_MDIO_RETRY 1000
+
+static unsigned char *rt2880_speed_str(struct fe_priv *priv)
+{
+ switch (priv->phy->speed[0]) {
+ case SPEED_1000:
+ return "1000";
+ case SPEED_100:
+ return "100";
+ case SPEED_10:
+ return "10";
+ }
+
+ return "?";
+}
+
+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
+{
+ u32 mdio_cfg;
+
+ if (!priv->link[0]) {
+ netif_carrier_off(priv->netdev);
+ netdev_info(priv->netdev, "link down\n");
+ return;
+ }
+
+ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
+ FE_MDIO_CFG_RX_CLK_SKEW_200 |
+ FE_MDIO_CFG_GP1_FRC_EN;
+
+ if (priv->phy->duplex[0] == DUPLEX_FULL)
+ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
+
+ if (priv->phy->tx_fc[0])
+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
+
+ if (priv->phy->rx_fc[0])
+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
+
+ switch (priv->phy->speed[0]) {
+ case SPEED_10:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
+ break;
+ case SPEED_100:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
+ break;
+ case SPEED_1000:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ fe_w32(mdio_cfg, FE_MDIO_CFG);
+
+ netif_carrier_on(priv->netdev);
+ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
+ rt2880_speed_str(priv),
+ (priv->phy->duplex[0] == DUPLEX_FULL) ? "Full" : "Half");
+}
+
+static int rt2880_mdio_wait_ready(struct fe_priv *priv)
+{
+ int retries;
+
+ retries = FE_MDIO_RETRY;
+ while (1) {
+ u32 t;
+
+ t = fe_r32(FE_MDIO_ACCESS);
+ if ((t & BIT(31)) == 0)
+ return 0;
+
+ if (retries-- == 0)
+ break;
+
+ udelay(1);
+ }
+
+ dev_err(priv->device, "MDIO operation timed out\n");
+ return -ETIMEDOUT;
+}
+
+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+ struct fe_priv *priv = bus->priv;
+ int err;
+ u32 t;
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return 0xffff;
+
+ t = (phy_addr << 24) | (phy_reg << 16);
+ fe_w32(t, FE_MDIO_ACCESS);
+ t |= BIT(31);
+ fe_w32(t, FE_MDIO_ACCESS);
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return 0xffff;
+
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
+}
+
+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
+{
+ struct fe_priv *priv = bus->priv;
+ int err;
+ u32 t;
+
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return err;
+
+ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
+ fe_w32(t, FE_MDIO_ACCESS);
+ t |= BIT(31);
+ fe_w32(t, FE_MDIO_ACCESS);
+
+ return rt2880_mdio_wait_ready(priv);
+}
+
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
+{
+ const __be32 *id = of_get_property(np, "reg", NULL);
+ const __be32 *link;
+ int size;
+ int phy_mode;
+
+ if (!id || (be32_to_cpu(*id) != 0)) {
+ pr_err("%s: invalid port id\n", np->name);
+ return;
+ }
+
+ priv->phy->phy_fixed[0] = of_get_property(np,
+ "mediatek,fixed-link", &size);
+ if (priv->phy->phy_fixed[0] &&
+ (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
+ pr_err("%s: invalid fixed link property\n", np->name);
+ priv->phy->phy_fixed[0] = NULL;
+ return;
+ }
+
+ phy_mode = of_get_phy_mode(np);
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ break;
+ default:
+ if (!priv->phy->phy_fixed[0])
+ dev_err(priv->device, "port %d - invalid phy mode\n",
+ priv->phy->speed[0]);
+ break;
+ }
+
+ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
+ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
+ return;
+
+ if (priv->phy->phy_fixed[0]) {
+ link = priv->phy->phy_fixed[0];
+ priv->phy->speed[0] = be32_to_cpup(link++);
+ priv->phy->duplex[0] = be32_to_cpup(link++);
+ priv->phy->tx_fc[0] = be32_to_cpup(link++);
+ priv->phy->rx_fc[0] = be32_to_cpup(link++);
+
+ priv->link[0] = 1;
+ switch (priv->phy->speed[0]) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ break;
+ case SPEED_1000:
+ break;
+ default:
+ dev_err(priv->device, "invalid link speed: %d\n",
+ priv->phy->speed[0]);
+ priv->phy->phy_fixed[0] = 0;
+ return;
+ }
+ dev_info(priv->device, "using fixed link parameters\n");
+ rt2880_mdio_link_adjust(priv, 0);
+ return;
+ }
+
+ if (priv->phy->phy_node[0] && mdiobus_get_phy(priv->mii_bus, 0))
+ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
+}
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.h
new file mode 100644
index 0000000..70e3442
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mdio_rt2880.h
@@ -0,0 +1,23 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef _RALINK_MDIO_RT2880_H__
+#define _RALINK_MDIO_RT2880_H__
+
+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+
+#endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c
new file mode 100644
index 0000000..1ec62e0
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c
@@ -0,0 +1,895 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2016 Vitaly Chekryzhev <13hakta at gmail.com>
+ */
+
+#include <linux/if.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/bitops.h>
+#include <net/genetlink.h>
+#include <linux/switch.h>
+#include <linux/delay.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/lockdep.h>
+#include <linux/workqueue.h>
+#include <linux/of_device.h>
+
+#include "mt7530.h"
+
+#define MT7530_CPU_PORT 6
+#define MT7530_NUM_PORTS 8
+#ifdef CONFIG_SOC_MT7621
+#define MT7530_NUM_VLANS 4095
+#else
+#define MT7530_NUM_VLANS 16
+#endif
+#define MT7530_MAX_VID 4095
+#define MT7530_MIN_VID 0
+
+/* registers */
+#define REG_ESW_VLAN_VTCR 0x90
+#define REG_ESW_VLAN_VAWD1 0x94
+#define REG_ESW_VLAN_VAWD2 0x98
+#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
+
+#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
+#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
+#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
+
+/* vlan egress mode */
+enum {
+ ETAG_CTRL_UNTAG = 0,
+ ETAG_CTRL_TAG = 2,
+ ETAG_CTRL_SWAP = 1,
+ ETAG_CTRL_STACK = 3,
+};
+
+#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
+#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
+#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
+
+#define REG_HWTRAP 0x7804
+
+#define MIB_DESC(_s , _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+struct mt7xxx_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+static const struct mt7xxx_mib_desc mt7620_mibs[] = {
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_AC_BCNT0, "PPE_AC_BCNT0"),
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_AC_PCNT0, "PPE_AC_PCNT0"),
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_AC_BCNT63, "PPE_AC_BCNT63"),
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_AC_PCNT63, "PPE_AC_PCNT63"),
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_MTR_CNT0, "PPE_MTR_CNT0"),
+ MIB_DESC(1, MT7620_MIB_STATS_PPE_MTR_CNT63, "PPE_MTR_CNT63"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_TX_GBCNT, "GDM1_TX_GBCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_TX_GPCNT, "GDM1_TX_GPCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_TX_SKIPCNT, "GDM1_TX_SKIPCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_TX_COLCNT, "GDM1_TX_COLCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_GBCNT1, "GDM1_RX_GBCNT1"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_GPCNT1, "GDM1_RX_GPCNT1"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_OERCNT, "GDM1_RX_OERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_FERCNT, "GDM1_RX_FERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_SERCNT, "GDM1_RX_SERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_LERCNT, "GDM1_RX_LERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_CERCNT, "GDM1_RX_CERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM1_RX_FCCNT, "GDM1_RX_FCCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_TX_GBCNT, "GDM2_TX_GBCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_TX_GPCNT, "GDM2_TX_GPCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_TX_SKIPCNT, "GDM2_TX_SKIPCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_TX_COLCNT, "GDM2_TX_COLCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_GBCNT, "GDM2_RX_GBCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_GPCNT, "GDM2_RX_GPCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_OERCNT, "GDM2_RX_OERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_FERCNT, "GDM2_RX_FERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_SERCNT, "GDM2_RX_SERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_LERCNT, "GDM2_RX_LERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_CERCNT, "GDM2_RX_CERCNT"),
+ MIB_DESC(1, MT7620_MIB_STATS_GDM2_RX_FCCNT, "GDM2_RX_FCCNT")
+};
+
+static const struct mt7xxx_mib_desc mt7620_port_mibs[] = {
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_TGPCN, "TxGPC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_TBOCN, "TxBOC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_TGOCN, "TxGOC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_TEPCN, "TxEPC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_RGPCN, "RxGPC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_RBOCN, "RxBOC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_RGOCN, "RxGOC"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_REPC1N, "RxEPC1"),
+ MIB_DESC(1, MT7620_MIB_STATS_PORT_REPC2N, "RxEPC2")
+};
+
+static const struct mt7xxx_mib_desc mt7621_mibs[] = {
+ MIB_DESC(1, MT7621_STATS_TDPC, "TxDrop"),
+ MIB_DESC(1, MT7621_STATS_TCRC, "TxCRC"),
+ MIB_DESC(1, MT7621_STATS_TUPC, "TxUni"),
+ MIB_DESC(1, MT7621_STATS_TMPC, "TxMulti"),
+ MIB_DESC(1, MT7621_STATS_TBPC, "TxBroad"),
+ MIB_DESC(1, MT7621_STATS_TCEC, "TxCollision"),
+ MIB_DESC(1, MT7621_STATS_TSCEC, "TxSingleCol"),
+ MIB_DESC(1, MT7621_STATS_TMCEC, "TxMultiCol"),
+ MIB_DESC(1, MT7621_STATS_TDEC, "TxDefer"),
+ MIB_DESC(1, MT7621_STATS_TLCEC, "TxLateCol"),
+ MIB_DESC(1, MT7621_STATS_TXCEC, "TxExcCol"),
+ MIB_DESC(1, MT7621_STATS_TPPC, "TxPause"),
+ MIB_DESC(1, MT7621_STATS_TL64PC, "Tx64Byte"),
+ MIB_DESC(1, MT7621_STATS_TL65PC, "Tx65Byte"),
+ MIB_DESC(1, MT7621_STATS_TL128PC, "Tx128Byte"),
+ MIB_DESC(1, MT7621_STATS_TL256PC, "Tx256Byte"),
+ MIB_DESC(1, MT7621_STATS_TL512PC, "Tx512Byte"),
+ MIB_DESC(1, MT7621_STATS_TL1024PC, "Tx1024Byte"),
+ MIB_DESC(2, MT7621_STATS_TOC, "TxByte"),
+ MIB_DESC(1, MT7621_STATS_RDPC, "RxDrop"),
+ MIB_DESC(1, MT7621_STATS_RFPC, "RxFiltered"),
+ MIB_DESC(1, MT7621_STATS_RUPC, "RxUni"),
+ MIB_DESC(1, MT7621_STATS_RMPC, "RxMulti"),
+ MIB_DESC(1, MT7621_STATS_RBPC, "RxBroad"),
+ MIB_DESC(1, MT7621_STATS_RAEPC, "RxAlignErr"),
+ MIB_DESC(1, MT7621_STATS_RCEPC, "RxCRC"),
+ MIB_DESC(1, MT7621_STATS_RUSPC, "RxUnderSize"),
+ MIB_DESC(1, MT7621_STATS_RFEPC, "RxFragment"),
+ MIB_DESC(1, MT7621_STATS_ROSPC, "RxOverSize"),
+ MIB_DESC(1, MT7621_STATS_RJEPC, "RxJabber"),
+ MIB_DESC(1, MT7621_STATS_RPPC, "RxPause"),
+ MIB_DESC(1, MT7621_STATS_RL64PC, "Rx64Byte"),
+ MIB_DESC(1, MT7621_STATS_RL65PC, "Rx65Byte"),
+ MIB_DESC(1, MT7621_STATS_RL128PC, "Rx128Byte"),
+ MIB_DESC(1, MT7621_STATS_RL256PC, "Rx256Byte"),
+ MIB_DESC(1, MT7621_STATS_RL512PC, "Rx512Byte"),
+ MIB_DESC(1, MT7621_STATS_RL1024PC, "Rx1024Byte"),
+ MIB_DESC(2, MT7621_STATS_ROC, "RxByte"),
+ MIB_DESC(1, MT7621_STATS_RDPC_CTRL, "RxCtrlDrop"),
+ MIB_DESC(1, MT7621_STATS_RDPC_ING, "RxIngDrop"),
+ MIB_DESC(1, MT7621_STATS_RDPC_ARL, "RxARLDrop")
+};
+
+enum {
+ /* Global attributes. */
+ MT7530_ATTR_ENABLE_VLAN,
+};
+
+struct mt7530_port_entry {
+ u16 pvid;
+};
+
+struct mt7530_vlan_entry {
+ u16 vid;
+ u8 member;
+ u8 etags;
+};
+
+struct mt7530_priv {
+ void __iomem *base;
+ struct mii_bus *bus;
+ struct switch_dev swdev;
+
+ bool global_vlan_enable;
+ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
+ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
+};
+
+struct mt7530_mapping {
+ char *name;
+ u16 pvids[MT7530_NUM_PORTS];
+ u8 members[MT7530_NUM_VLANS];
+ u8 etags[MT7530_NUM_VLANS];
+ u16 vids[MT7530_NUM_VLANS];
+} mt7530_defaults[] = {
+ {
+ .name = "llllw",
+ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
+ .members = { 0, 0x6f, 0x50 },
+ .etags = { 0, 0x40, 0x40 },
+ .vids = { 0, 1, 2 },
+ }, {
+ .name = "wllll",
+ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
+ .members = { 0, 0x7e, 0x41 },
+ .etags = { 0, 0x40, 0x40 },
+ .vids = { 0, 1, 2 },
+ },
+};
+
+struct mt7530_mapping*
+mt7530_find_mapping(struct device_node *np)
+{
+ const char *map;
+ int i;
+
+ if (of_property_read_string(np, "mediatek,portmap", &map))
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
+ if (!strcmp(map, mt7530_defaults[i].name))
+ return &mt7530_defaults[i];
+
+ return NULL;
+}
+
+static void
+mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
+{
+ int i = 0;
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+ mt7530->port_entries[i].pvid = map->pvids[i];
+
+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
+ mt7530->vlan_entries[i].member = map->members[i];
+ mt7530->vlan_entries[i].etags = map->etags[i];
+ mt7530->vlan_entries[i].vid = map->vids[i];
+ }
+}
+
+static int
+mt7530_reset_switch(struct switch_dev *dev)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int i;
+
+ memset(priv->port_entries, 0, sizeof(priv->port_entries));
+ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
+
+ /* set default vid of each vlan to the same number of vlan, so the vid
+ * won't need be set explicitly.
+ */
+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
+ priv->vlan_entries[i].vid = i;
+ }
+
+ return 0;
+}
+
+static int
+mt7530_get_vlan_enable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+
+ val->value.i = priv->global_vlan_enable;
+
+ return 0;
+}
+
+static int
+mt7530_set_vlan_enable(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+
+ priv->global_vlan_enable = val->value.i != 0;
+
+ return 0;
+}
+
+static u32
+mt7530_r32(struct mt7530_priv *priv, u32 reg)
+{
+ u32 val;
+ if (priv->bus) {
+ u16 high, low;
+
+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
+ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf);
+ high = mdiobus_read(priv->bus, 0x1f, 0x10);
+
+ return (high << 16) | (low & 0xffff);
+ }
+
+ val = ioread32(priv->base + reg);
+ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
+
+ return val;
+}
+
+static void
+mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+ if (priv->bus) {
+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
+ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
+ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16);
+ return;
+ }
+
+ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
+ iowrite32(val, priv->base + reg);
+}
+
+static void
+mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val)
+{
+ int i;
+
+ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
+
+ for (i = 0; i < 20; i++) {
+ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR);
+
+ if ((val & BIT(31)) == 0)
+ break;
+
+ udelay(1000);
+ }
+ if (i == 20)
+ printk("mt7530: vtcr timeout\n");
+}
+
+static int
+mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+
+ if (port >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port));
+ *val &= 0xfff;
+
+ return 0;
+}
+
+static int
+mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+
+ if (port >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
+ return -EINVAL;
+
+ priv->port_entries[port].pvid = pvid;
+
+ return 0;
+}
+
+static int
+mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ u32 member;
+ u32 etags;
+ int i;
+
+ val->len = 0;
+
+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
+ return -EINVAL;
+
+ mt7530_vtcr(priv, 0, val->port_vlan);
+
+ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1);
+ member >>= 16;
+ member &= 0xff;
+
+ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2);
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ struct switch_port *p;
+ int etag;
+
+ if (!(member & BIT(i)))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+
+ etag = (etags >> (i * 2)) & 0x3;
+
+ if (etag == ETAG_CTRL_TAG)
+ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
+ else if (etag != ETAG_CTRL_UNTAG)
+ printk("vlan egress tag control neither untag nor tag.\n");
+ }
+
+ return 0;
+}
+
+static int
+mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ u8 member = 0;
+ u8 etags = 0;
+ int i;
+
+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
+ val->len > MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ for (i = 0; i < val->len; i++) {
+ struct switch_port *p = &val->value.ports[i];
+
+ if (p->id >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ member |= BIT(p->id);
+
+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
+ etags |= BIT(p->id);
+ }
+ priv->vlan_entries[val->port_vlan].member = member;
+ priv->vlan_entries[val->port_vlan].etags = etags;
+
+ return 0;
+}
+
+static int
+mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int vlan;
+ u16 vid;
+
+ vlan = val->port_vlan;
+ vid = (u16)val->value.i;
+
+ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
+ return -EINVAL;
+
+ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
+ return -EINVAL;
+
+ priv->vlan_entries[vlan].vid = vid;
+ return 0;
+}
+
+static int
+mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ u32 vid;
+ int vlan;
+
+ vlan = val->port_vlan;
+
+ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan));
+ if (vlan & 1)
+ vid = vid >> 12;
+ vid &= 0xfff;
+
+ val->value.i = vid;
+ return 0;
+}
+
+static int
+mt7530_apply_config(struct switch_dev *dev)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int i, j;
+ u8 tag_ports;
+ u8 untag_ports;
+
+ if (!priv->global_vlan_enable) {
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00400000);
+
+ mt7530_w32(priv, REG_ESW_PORT_PCR(MT7530_CPU_PORT), 0x00ff0000);
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x810000c0);
+
+ return 0;
+ }
+
+ /* set all ports as security mode */
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
+
+ /* check if a port is used in tag/untag vlan egress mode */
+ tag_ports = 0;
+ untag_ports = 0;
+
+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
+ u8 member = priv->vlan_entries[i].member;
+ u8 etags = priv->vlan_entries[i].etags;
+
+ if (!member)
+ continue;
+
+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
+ if (!(member & BIT(j)))
+ continue;
+
+ if (etags & BIT(j))
+ tag_ports |= 1u << j;
+ else
+ untag_ports |= 1u << j;
+ }
+ }
+
+ /* set all untag-only ports as transparent and the rest as user port */
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ u32 pvc_mode = 0x81000000;
+
+ if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
+ pvc_mode = 0x810000c0;
+
+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), pvc_mode);
+ }
+
+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
+ u16 vid = priv->vlan_entries[i].vid;
+ u8 member = priv->vlan_entries[i].member;
+ u8 etags = priv->vlan_entries[i].etags;
+ u32 val;
+
+#ifndef CONFIG_SOC_MT7621
+ /* vid of vlan */
+ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
+ if (i % 2 == 0) {
+ val &= 0xfff000;
+ val |= vid;
+ } else {
+ val &= 0xfff;
+ val |= (vid << 12);
+ }
+ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
+#endif
+ /* vlan port membership */
+ if (member)
+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
+ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
+ REG_ESW_VLAN_VAWD1_VALID);
+ else
+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
+
+ /* egress mode */
+ val = 0;
+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
+ if (etags & BIT(j))
+ val |= ETAG_CTRL_TAG << (j * 2);
+ else
+ val |= ETAG_CTRL_UNTAG << (j * 2);
+ }
+ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val);
+
+ /* write to vlan table */
+#ifdef CONFIG_SOC_MT7621
+ mt7530_vtcr(priv, 1, vid);
+#else
+ mt7530_vtcr(priv, 1, i);
+#endif
+ }
+
+ /* Port Default PVID */
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ u32 val;
+ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i));
+ val &= ~0xfff;
+ val |= priv->port_entries[i].pvid;
+ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val);
+ }
+
+ return 0;
+}
+
+static int
+mt7530_get_port_link(struct switch_dev *dev, int port,
+ struct switch_port_link *link)
+{
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ u32 speed, pmsr;
+
+ if (port < 0 || port >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port));
+
+ link->link = pmsr & 1;
+ link->duplex = (pmsr >> 1) & 1;
+ speed = (pmsr >> 2) & 3;
+
+ switch (speed) {
+ case 0:
+ link->speed = SWITCH_PORT_SPEED_10;
+ break;
+ case 1:
+ link->speed = SWITCH_PORT_SPEED_100;
+ break;
+ case 2:
+ case 3: /* forced gige speed can be 2 or 3 */
+ link->speed = SWITCH_PORT_SPEED_1000;
+ break;
+ default:
+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static u64 get_mib_counter(struct mt7530_priv *priv, int i, int port)
+{
+ unsigned int port_base;
+ u64 lo;
+
+ port_base = MT7621_MIB_COUNTER_BASE +
+ MT7621_MIB_COUNTER_PORT_OFFSET * port;
+
+ lo = mt7530_r32(priv, port_base + mt7621_mibs[i].offset);
+ if (mt7621_mibs[i].size == 2) {
+ u64 hi;
+
+ hi = mt7530_r32(priv, port_base + mt7621_mibs[i].offset + 4);
+ lo |= hi << 32;
+ }
+
+ return lo;
+}
+
+static int mt7621_sw_get_port_mib(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ static char buf[4096];
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int i, len = 0;
+
+ if (val->port_vlan >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "Port %d MIB counters\n", val->port_vlan);
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_mibs); ++i) {
+ u64 counter;
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%-11s: ", mt7621_mibs[i].name);
+ counter = get_mib_counter(priv, i, val->port_vlan);
+ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
+ counter);
+ }
+
+ val->value.s = buf;
+ val->len = len;
+ return 0;
+}
+
+static u64 get_mib_counter_7620(struct mt7530_priv *priv, int i)
+{
+ return mt7530_r32(priv, MT7620_MIB_COUNTER_BASE + mt7620_mibs[i].offset);
+}
+
+static u64 get_mib_counter_port_7620(struct mt7530_priv *priv, int i, int port)
+{
+ return mt7530_r32(priv,
+ MT7620_MIB_COUNTER_BASE_PORT +
+ (MT7620_MIB_COUNTER_PORT_OFFSET * port) +
+ mt7620_port_mibs[i].offset);
+}
+
+static int mt7530_sw_get_mib(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ static char buf[4096];
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int i, len = 0;
+
+ len += snprintf(buf + len, sizeof(buf) - len, "Switch MIB counters\n");
+
+ for (i = 0; i < ARRAY_SIZE(mt7620_mibs); ++i) {
+ u64 counter;
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%-11s: ", mt7620_mibs[i].name);
+ counter = get_mib_counter_7620(priv, i);
+ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
+ counter);
+ }
+
+ val->value.s = buf;
+ val->len = len;
+ return 0;
+}
+
+static int mt7530_sw_get_port_mib(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ static char buf[4096];
+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
+ int i, len = 0;
+
+ if (val->port_vlan >= MT7530_NUM_PORTS)
+ return -EINVAL;
+
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "Port %d MIB counters\n", val->port_vlan);
+
+ for (i = 0; i < ARRAY_SIZE(mt7620_port_mibs); ++i) {
+ u64 counter;
+ len += snprintf(buf + len, sizeof(buf) - len,
+ "%-11s: ", mt7620_port_mibs[i].name);
+ counter = get_mib_counter_port_7620(priv, i, val->port_vlan);
+ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
+ counter);
+ }
+
+ val->value.s = buf;
+ val->len = len;
+ return 0;
+}
+
+static const struct switch_attr mt7530_global[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable_vlan",
+ .description = "VLAN mode (1:enabled)",
+ .max = 1,
+ .id = MT7530_ATTR_ENABLE_VLAN,
+ .get = mt7530_get_vlan_enable,
+ .set = mt7530_set_vlan_enable,
+ }, {
+ .type = SWITCH_TYPE_STRING,
+ .name = "mib",
+ .description = "Get MIB counters for switch",
+ .get = mt7530_sw_get_mib,
+ .set = NULL,
+ },
+};
+
+static const struct switch_attr mt7621_port[] = {
+ {
+ .type = SWITCH_TYPE_STRING,
+ .name = "mib",
+ .description = "Get MIB counters for port",
+ .get = mt7621_sw_get_port_mib,
+ .set = NULL,
+ },
+};
+
+static const struct switch_attr mt7530_port[] = {
+ {
+ .type = SWITCH_TYPE_STRING,
+ .name = "mib",
+ .description = "Get MIB counters for port",
+ .get = mt7530_sw_get_port_mib,
+ .set = NULL,
+ },
+};
+
+static const struct switch_attr mt7530_vlan[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vid",
+ .description = "VLAN ID (0-4094)",
+ .set = mt7530_set_vid,
+ .get = mt7530_get_vid,
+ .max = 4094,
+ },
+};
+
+static const struct switch_dev_ops mt7621_ops = {
+ .attr_global = {
+ .attr = mt7530_global,
+ .n_attr = ARRAY_SIZE(mt7530_global),
+ },
+ .attr_port = {
+ .attr = mt7621_port,
+ .n_attr = ARRAY_SIZE(mt7621_port),
+ },
+ .attr_vlan = {
+ .attr = mt7530_vlan,
+ .n_attr = ARRAY_SIZE(mt7530_vlan),
+ },
+ .get_vlan_ports = mt7530_get_vlan_ports,
+ .set_vlan_ports = mt7530_set_vlan_ports,
+ .get_port_pvid = mt7530_get_port_pvid,
+ .set_port_pvid = mt7530_set_port_pvid,
+ .get_port_link = mt7530_get_port_link,
+ .apply_config = mt7530_apply_config,
+ .reset_switch = mt7530_reset_switch,
+};
+
+static const struct switch_dev_ops mt7530_ops = {
+ .attr_global = {
+ .attr = mt7530_global,
+ .n_attr = ARRAY_SIZE(mt7530_global),
+ },
+ .attr_port = {
+ .attr = mt7530_port,
+ .n_attr = ARRAY_SIZE(mt7530_port),
+ },
+ .attr_vlan = {
+ .attr = mt7530_vlan,
+ .n_attr = ARRAY_SIZE(mt7530_vlan),
+ },
+ .get_vlan_ports = mt7530_get_vlan_ports,
+ .set_vlan_ports = mt7530_set_vlan_ports,
+ .get_port_pvid = mt7530_get_port_pvid,
+ .set_port_pvid = mt7530_set_port_pvid,
+ .get_port_link = mt7530_get_port_link,
+ .apply_config = mt7530_apply_config,
+ .reset_switch = mt7530_reset_switch,
+};
+
+int
+mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan)
+{
+ struct switch_dev *swdev;
+ struct mt7530_priv *mt7530;
+ struct mt7530_mapping *map;
+ int ret;
+
+ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
+ if (!mt7530)
+ return -ENOMEM;
+
+ mt7530->base = base;
+ mt7530->bus = bus;
+ mt7530->global_vlan_enable = vlan;
+
+ swdev = &mt7530->swdev;
+ if (bus) {
+ swdev->alias = "mt7530";
+ swdev->name = "mt7530";
+ } else if (IS_ENABLED(CONFIG_SOC_MT7621)) {
+ swdev->alias = "mt7621";
+ swdev->name = "mt7621";
+ } else {
+ swdev->alias = "mt7620";
+ swdev->name = "mt7620";
+ }
+ swdev->cpu_port = MT7530_CPU_PORT;
+ swdev->ports = MT7530_NUM_PORTS;
+ swdev->vlans = MT7530_NUM_VLANS;
+ if (IS_ENABLED(CONFIG_SOC_MT7621))
+ swdev->ops = &mt7621_ops;
+ else
+ swdev->ops = &mt7530_ops;
+
+ ret = register_switch(swdev, NULL);
+ if (ret) {
+ dev_err(dev, "failed to register mt7530\n");
+ return ret;
+ }
+
+
+ map = mt7530_find_mapping(dev->of_node);
+ if (map)
+ mt7530_apply_mapping(mt7530, map);
+ mt7530_apply_config(swdev);
+
+ /* magic vodoo */
+ if (!IS_ENABLED(CONFIG_SOC_MT7621) && bus && mt7530_r32(mt7530, REG_HWTRAP) != 0x1117edf) {
+ dev_info(dev, "fixing up MHWTRAP register - bootloader probably played with it\n");
+ mt7530_w32(mt7530, REG_HWTRAP, 0x1117edf);
+ }
+ dev_info(dev, "loaded %s driver\n", swdev->name);
+
+ return 0;
+}
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.h
new file mode 100644
index 0000000..cf725c2
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.h
@@ -0,0 +1,186 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2016 Vitaly Chekryzhev <13hakta at gmail.com>
+ */
+
+#ifndef _MT7530_H__
+#define _MT7530_H__
+
+#define MT7620_MIB_COUNTER_BASE_PORT 0x4000
+#define MT7620_MIB_COUNTER_PORT_OFFSET 0x100
+#define MT7620_MIB_COUNTER_BASE 0x1010
+
+/* PPE Accounting Group #0 Byte Counter */
+#define MT7620_MIB_STATS_PPE_AC_BCNT0 0x000
+
+/* PPE Accounting Group #0 Packet Counter */
+#define MT7620_MIB_STATS_PPE_AC_PCNT0 0x004
+
+/* PPE Accounting Group #63 Byte Counter */
+#define MT7620_MIB_STATS_PPE_AC_BCNT63 0x1F8
+
+/* PPE Accounting Group #63 Packet Counter */
+#define MT7620_MIB_STATS_PPE_AC_PCNT63 0x1FC
+
+/* PPE Meter Group #0 */
+#define MT7620_MIB_STATS_PPE_MTR_CNT0 0x200
+
+/* PPE Meter Group #63 */
+#define MT7620_MIB_STATS_PPE_MTR_CNT63 0x2FC
+
+/* Transmit good byte count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_TX_GBCNT 0x300
+
+/* Transmit good packet count for CPU GDM (exclude flow control frames) */
+#define MT7620_MIB_STATS_GDM1_TX_GPCNT 0x304
+
+/* Transmit abort count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_TX_SKIPCNT 0x308
+
+/* Transmit collision count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_TX_COLCNT 0x30C
+
+/* Received good byte count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_GBCNT1 0x320
+
+/* Received good packet count for CPU GDM (exclude flow control frame) */
+#define MT7620_MIB_STATS_GDM1_RX_GPCNT1 0x324
+
+/* Received overflow error packet count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_OERCNT 0x328
+
+/* Received FCS error packet count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_FERCNT 0x32C
+
+/* Received too short error packet count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_SERCNT 0x330
+
+/* Received too long error packet count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_LERCNT 0x334
+
+/* Received IP/TCP/UDP checksum error packet count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_CERCNT 0x338
+
+/* Received flow control pkt count for CPU GDM */
+#define MT7620_MIB_STATS_GDM1_RX_FCCNT 0x33C
+
+/* Transmit good byte count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_TX_GBCNT 0x340
+
+/* Transmit good packet count for PPE GDM (exclude flow control frames) */
+#define MT7620_MIB_STATS_GDM2_TX_GPCNT 0x344
+
+/* Transmit abort count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_TX_SKIPCNT 0x348
+
+/* Transmit collision count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_TX_COLCNT 0x34C
+
+/* Received good byte count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_GBCNT 0x360
+
+/* Received good packet count for PPE GDM (exclude flow control frame) */
+#define MT7620_MIB_STATS_GDM2_RX_GPCNT 0x364
+
+/* Received overflow error packet count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_OERCNT 0x368
+
+/* Received FCS error packet count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_FERCNT 0x36C
+
+/* Received too short error packet count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_SERCNT 0x370
+
+/* Received too long error packet count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_LERCNT 0x374
+
+/* Received IP/TCP/UDP checksum error packet count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_CERCNT 0x378
+
+/* Received flow control pkt count for PPE GDM */
+#define MT7620_MIB_STATS_GDM2_RX_FCCNT 0x37C
+
+/* Tx Packet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_TGPCN 0x10
+
+/* Tx Bad Octet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_TBOCN 0x14
+
+/* Tx Good Octet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_TGOCN 0x18
+
+/* Tx Event Packet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_TEPCN 0x1C
+
+/* Rx Packet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_RGPCN 0x20
+
+/* Rx Bad Octet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_RBOCN 0x24
+
+/* Rx Good Octet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_RGOCN 0x28
+
+/* Rx Event Packet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_REPC1N 0x2C
+
+/* Rx Event Packet Counter of Port n */
+#define MT7620_MIB_STATS_PORT_REPC2N 0x30
+
+#define MT7621_MIB_COUNTER_BASE 0x4000
+#define MT7621_MIB_COUNTER_PORT_OFFSET 0x100
+#define MT7621_STATS_TDPC 0x00
+#define MT7621_STATS_TCRC 0x04
+#define MT7621_STATS_TUPC 0x08
+#define MT7621_STATS_TMPC 0x0C
+#define MT7621_STATS_TBPC 0x10
+#define MT7621_STATS_TCEC 0x14
+#define MT7621_STATS_TSCEC 0x18
+#define MT7621_STATS_TMCEC 0x1C
+#define MT7621_STATS_TDEC 0x20
+#define MT7621_STATS_TLCEC 0x24
+#define MT7621_STATS_TXCEC 0x28
+#define MT7621_STATS_TPPC 0x2C
+#define MT7621_STATS_TL64PC 0x30
+#define MT7621_STATS_TL65PC 0x34
+#define MT7621_STATS_TL128PC 0x38
+#define MT7621_STATS_TL256PC 0x3C
+#define MT7621_STATS_TL512PC 0x40
+#define MT7621_STATS_TL1024PC 0x44
+#define MT7621_STATS_TOC 0x48
+#define MT7621_STATS_RDPC 0x60
+#define MT7621_STATS_RFPC 0x64
+#define MT7621_STATS_RUPC 0x68
+#define MT7621_STATS_RMPC 0x6C
+#define MT7621_STATS_RBPC 0x70
+#define MT7621_STATS_RAEPC 0x74
+#define MT7621_STATS_RCEPC 0x78
+#define MT7621_STATS_RUSPC 0x7C
+#define MT7621_STATS_RFEPC 0x80
+#define MT7621_STATS_ROSPC 0x84
+#define MT7621_STATS_RJEPC 0x88
+#define MT7621_STATS_RPPC 0x8C
+#define MT7621_STATS_RL64PC 0x90
+#define MT7621_STATS_RL65PC 0x94
+#define MT7621_STATS_RL128PC 0x98
+#define MT7621_STATS_RL256PC 0x9C
+#define MT7621_STATS_RL512PC 0xA0
+#define MT7621_STATS_RL1024PC 0xA4
+#define MT7621_STATS_ROC 0xA8
+#define MT7621_STATS_RDPC_CTRL 0xB0
+#define MT7621_STATS_RDPC_ING 0xB4
+#define MT7621_STATS_RDPC_ARL 0xB8
+
+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan);
+
+#endif
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c
new file mode 100644
index 0000000..3e8768f
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.c
@@ -0,0 +1,1595 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/if_vlan.h>
+#include <linux/reset.h>
+#include <linux/tcp.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio.h"
+#include "ethtool.h"
+
+#define MAX_RX_LENGTH 1536
+#define FE_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
+#define FE_RX_HLEN (NET_SKB_PAD + FE_RX_ETH_HLEN + NET_IP_ALIGN)
+#define DMA_DUMMY_DESC 0xffffffff
+#define FE_DEFAULT_MSG_ENABLE \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | \
+ NETIF_MSG_IFDOWN | \
+ NETIF_MSG_IFUP | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
+
+#define TX_DMA_DESP2_DEF (TX_DMA_LS0 | TX_DMA_DONE)
+#define TX_DMA_DESP4_DEF (TX_DMA_QN(3) | TX_DMA_PN(1))
+#define NEXT_TX_DESP_IDX(X) (((X) + 1) & (ring->tx_ring_size - 1))
+#define NEXT_RX_DESP_IDX(X) (((X) + 1) & (ring->rx_ring_size - 1))
+
+#define SYSC_REG_RSTCTRL 0x34
+
+static int fe_msg_level = -1;
+module_param_named(msg_level, fe_msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
+
+static const u16 fe_reg_table_default[FE_REG_COUNT] = {
+ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
+ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
+ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
+ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
+ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
+ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
+ [FE_REG_TX_DTX_IDX0] = FE_TX_DTX_IDX0,
+ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
+ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
+ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
+ [FE_REG_RX_DRX_IDX0] = FE_RX_DRX_IDX0,
+ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
+ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
+ [FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0,
+ [FE_REG_FE_COUNTER_BASE] = FE_GDMA1_TX_GBCNT,
+ [FE_REG_FE_RST_GL] = FE_FE_RST_GL,
+};
+
+static const u16 *fe_reg_table = fe_reg_table_default;
+
+struct fe_work_t {
+ int bitnr;
+ void (*action)(struct fe_priv *);
+};
+
+static void __iomem *fe_base;
+
+void fe_w32(u32 val, unsigned reg)
+{
+ __raw_writel(val, fe_base + reg);
+}
+
+u32 fe_r32(unsigned reg)
+{
+ return __raw_readl(fe_base + reg);
+}
+
+void fe_reg_w32(u32 val, enum fe_reg reg)
+{
+ fe_w32(val, fe_reg_table[reg]);
+}
+
+u32 fe_reg_r32(enum fe_reg reg)
+{
+ return fe_r32(fe_reg_table[reg]);
+}
+
+void fe_reset(u32 reset_bits)
+{
+ u32 t;
+
+ t = rt_sysc_r32(SYSC_REG_RSTCTRL);
+ t |= reset_bits;
+ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
+ usleep_range(10, 20);
+
+ t &= ~reset_bits;
+ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
+ usleep_range(10, 20);
+}
+
+static inline void fe_int_disable(u32 mask)
+{
+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
+ FE_REG_FE_INT_ENABLE);
+ /* flush write */
+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
+}
+
+static inline void fe_int_enable(u32 mask)
+{
+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
+ FE_REG_FE_INT_ENABLE);
+ /* flush write */
+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
+}
+
+static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
+ FE_GDMA1_MAC_ADRL);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+}
+
+static int fe_set_mac_address(struct net_device *dev, void *p)
+{
+ int ret = eth_mac_addr(dev, p);
+
+ if (!ret) {
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if (priv->soc->set_mac)
+ priv->soc->set_mac(priv, dev->dev_addr);
+ else
+ fe_hw_set_macaddr(priv, p);
+ }
+
+ return ret;
+}
+
+static inline int fe_max_frag_size(int mtu)
+{
+ /* make sure buf_size will be at least MAX_RX_LENGTH */
+ if (mtu + FE_RX_ETH_HLEN < MAX_RX_LENGTH)
+ mtu = MAX_RX_LENGTH - FE_RX_ETH_HLEN;
+
+ return SKB_DATA_ALIGN(FE_RX_HLEN + mtu) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+}
+
+static inline int fe_max_buf_size(int frag_size)
+{
+ int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+ BUG_ON(buf_size < MAX_RX_LENGTH);
+ return buf_size;
+}
+
+static inline void fe_get_rxd(struct fe_rx_dma *rxd, struct fe_rx_dma *dma_rxd)
+{
+ rxd->rxd1 = dma_rxd->rxd1;
+ rxd->rxd2 = dma_rxd->rxd2;
+ rxd->rxd3 = dma_rxd->rxd3;
+ rxd->rxd4 = dma_rxd->rxd4;
+}
+
+static inline void fe_set_txd(struct fe_tx_dma *txd, struct fe_tx_dma *dma_txd)
+{
+ dma_txd->txd1 = txd->txd1;
+ dma_txd->txd3 = txd->txd3;
+ dma_txd->txd4 = txd->txd4;
+ /* clean dma done flag last */
+ dma_txd->txd2 = txd->txd2;
+}
+
+static void fe_clean_rx(struct fe_priv *priv)
+{
+ int i;
+ struct fe_rx_ring *ring = &priv->rx_ring;
+
+ if (ring->rx_data) {
+ for (i = 0; i < ring->rx_ring_size; i++)
+ if (ring->rx_data[i]) {
+ if (ring->rx_dma && ring->rx_dma[i].rxd1)
+ dma_unmap_single(&priv->netdev->dev,
+ ring->rx_dma[i].rxd1,
+ ring->rx_buf_size,
+ DMA_FROM_DEVICE);
+ put_page(virt_to_head_page(ring->rx_data[i]));
+ }
+
+ kfree(ring->rx_data);
+ ring->rx_data = NULL;
+ }
+
+ if (ring->rx_dma) {
+ dma_free_coherent(&priv->netdev->dev,
+ ring->rx_ring_size * sizeof(*ring->rx_dma),
+ ring->rx_dma,
+ ring->rx_phys);
+ ring->rx_dma = NULL;
+ }
+}
+
+static int fe_alloc_rx(struct fe_priv *priv)
+{
+ struct net_device *netdev = priv->netdev;
+ struct fe_rx_ring *ring = &priv->rx_ring;
+ int i, pad;
+
+ ring->rx_data = kcalloc(ring->rx_ring_size, sizeof(*ring->rx_data),
+ GFP_KERNEL);
+ if (!ring->rx_data)
+ goto no_rx_mem;
+
+ for (i = 0; i < ring->rx_ring_size; i++) {
+ ring->rx_data[i] = netdev_alloc_frag(ring->frag_size);
+ if (!ring->rx_data[i])
+ goto no_rx_mem;
+ }
+
+ ring->rx_dma = dma_alloc_coherent(&netdev->dev,
+ ring->rx_ring_size * sizeof(*ring->rx_dma),
+ &ring->rx_phys,
+ GFP_ATOMIC | __GFP_ZERO);
+ if (!ring->rx_dma)
+ goto no_rx_mem;
+
+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
+ pad = 0;
+ else
+ pad = NET_IP_ALIGN;
+ for (i = 0; i < ring->rx_ring_size; i++) {
+ dma_addr_t dma_addr = dma_map_single(&netdev->dev,
+ ring->rx_data[i] + NET_SKB_PAD + pad,
+ ring->rx_buf_size,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr)))
+ goto no_rx_mem;
+ ring->rx_dma[i].rxd1 = (unsigned int)dma_addr;
+
+ if (priv->flags & FE_FLAG_RX_SG_DMA)
+ ring->rx_dma[i].rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
+ else
+ ring->rx_dma[i].rxd2 = RX_DMA_LSO;
+ }
+ ring->rx_calc_idx = ring->rx_ring_size - 1;
+ /* make sure that all changes to the dma ring are flushed before we
+ * continue
+ */
+ wmb();
+
+ fe_reg_w32(ring->rx_phys, FE_REG_RX_BASE_PTR0);
+ fe_reg_w32(ring->rx_ring_size, FE_REG_RX_MAX_CNT0);
+ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
+ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
+
+ return 0;
+
+no_rx_mem:
+ return -ENOMEM;
+}
+
+static void fe_txd_unmap(struct device *dev, struct fe_tx_buf *tx_buf)
+{
+ if (tx_buf->flags & FE_TX_FLAGS_SINGLE0) {
+ dma_unmap_single(dev,
+ dma_unmap_addr(tx_buf, dma_addr0),
+ dma_unmap_len(tx_buf, dma_len0),
+ DMA_TO_DEVICE);
+ } else if (tx_buf->flags & FE_TX_FLAGS_PAGE0) {
+ dma_unmap_page(dev,
+ dma_unmap_addr(tx_buf, dma_addr0),
+ dma_unmap_len(tx_buf, dma_len0),
+ DMA_TO_DEVICE);
+ }
+ if (tx_buf->flags & FE_TX_FLAGS_PAGE1)
+ dma_unmap_page(dev,
+ dma_unmap_addr(tx_buf, dma_addr1),
+ dma_unmap_len(tx_buf, dma_len1),
+ DMA_TO_DEVICE);
+
+ tx_buf->flags = 0;
+ if (tx_buf->skb && (tx_buf->skb != (struct sk_buff *)DMA_DUMMY_DESC))
+ dev_kfree_skb_any(tx_buf->skb);
+ tx_buf->skb = NULL;
+}
+
+static void fe_clean_tx(struct fe_priv *priv)
+{
+ int i;
+ struct device *dev = &priv->netdev->dev;
+ struct fe_tx_ring *ring = &priv->tx_ring;
+
+ if (ring->tx_buf) {
+ for (i = 0; i < ring->tx_ring_size; i++)
+ fe_txd_unmap(dev, &ring->tx_buf[i]);
+ kfree(ring->tx_buf);
+ ring->tx_buf = NULL;
+ }
+
+ if (ring->tx_dma) {
+ dma_free_coherent(dev,
+ ring->tx_ring_size * sizeof(*ring->tx_dma),
+ ring->tx_dma,
+ ring->tx_phys);
+ ring->tx_dma = NULL;
+ }
+
+ netdev_reset_queue(priv->netdev);
+}
+
+static int fe_alloc_tx(struct fe_priv *priv)
+{
+ int i;
+ struct fe_tx_ring *ring = &priv->tx_ring;
+
+ ring->tx_free_idx = 0;
+ ring->tx_next_idx = 0;
+ ring->tx_thresh = max((unsigned long)ring->tx_ring_size >> 2,
+ MAX_SKB_FRAGS);
+
+ ring->tx_buf = kcalloc(ring->tx_ring_size, sizeof(*ring->tx_buf),
+ GFP_KERNEL);
+ if (!ring->tx_buf)
+ goto no_tx_mem;
+
+ ring->tx_dma = dma_alloc_coherent(&priv->netdev->dev,
+ ring->tx_ring_size * sizeof(*ring->tx_dma),
+ &ring->tx_phys,
+ GFP_ATOMIC | __GFP_ZERO);
+ if (!ring->tx_dma)
+ goto no_tx_mem;
+
+ for (i = 0; i < ring->tx_ring_size; i++) {
+ if (priv->soc->tx_dma)
+ priv->soc->tx_dma(&ring->tx_dma[i]);
+ ring->tx_dma[i].txd2 = TX_DMA_DESP2_DEF;
+ }
+ /* make sure that all changes to the dma ring are flushed before we
+ * continue
+ */
+ wmb();
+
+ fe_reg_w32(ring->tx_phys, FE_REG_TX_BASE_PTR0);
+ fe_reg_w32(ring->tx_ring_size, FE_REG_TX_MAX_CNT0);
+ fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
+ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
+
+ return 0;
+
+no_tx_mem:
+ return -ENOMEM;
+}
+
+static int fe_init_dma(struct fe_priv *priv)
+{
+ int err;
+
+ err = fe_alloc_tx(priv);
+ if (err)
+ return err;
+
+ err = fe_alloc_rx(priv);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static void fe_free_dma(struct fe_priv *priv)
+{
+ fe_clean_tx(priv);
+ fe_clean_rx(priv);
+}
+
+void fe_stats_update(struct fe_priv *priv)
+{
+ struct fe_hw_stats *hwstats = priv->hw_stats;
+ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
+ u64 stats;
+
+ u64_stats_update_begin(&hwstats->syncp);
+
+ if (IS_ENABLED(CONFIG_SOC_MT7621)) {
+ hwstats->rx_bytes += fe_r32(base);
+ stats = fe_r32(base + 0x04);
+ if (stats)
+ hwstats->rx_bytes += (stats << 32);
+ hwstats->rx_packets += fe_r32(base + 0x08);
+ hwstats->rx_overflow += fe_r32(base + 0x10);
+ hwstats->rx_fcs_errors += fe_r32(base + 0x14);
+ hwstats->rx_short_errors += fe_r32(base + 0x18);
+ hwstats->rx_long_errors += fe_r32(base + 0x1c);
+ hwstats->rx_checksum_errors += fe_r32(base + 0x20);
+ hwstats->rx_flow_control_packets += fe_r32(base + 0x24);
+ hwstats->tx_skip += fe_r32(base + 0x28);
+ hwstats->tx_collisions += fe_r32(base + 0x2c);
+ hwstats->tx_bytes += fe_r32(base + 0x30);
+ stats = fe_r32(base + 0x34);
+ if (stats)
+ hwstats->tx_bytes += (stats << 32);
+ hwstats->tx_packets += fe_r32(base + 0x38);
+ } else {
+ hwstats->tx_bytes += fe_r32(base);
+ hwstats->tx_packets += fe_r32(base + 0x04);
+ hwstats->tx_skip += fe_r32(base + 0x08);
+ hwstats->tx_collisions += fe_r32(base + 0x0c);
+ hwstats->rx_bytes += fe_r32(base + 0x20);
+ hwstats->rx_packets += fe_r32(base + 0x24);
+ hwstats->rx_overflow += fe_r32(base + 0x28);
+ hwstats->rx_fcs_errors += fe_r32(base + 0x2c);
+ hwstats->rx_short_errors += fe_r32(base + 0x30);
+ hwstats->rx_long_errors += fe_r32(base + 0x34);
+ hwstats->rx_checksum_errors += fe_r32(base + 0x38);
+ hwstats->rx_flow_control_packets += fe_r32(base + 0x3c);
+ }
+
+ u64_stats_update_end(&hwstats->syncp);
+}
+
+static struct rtnl_link_stats64 *fe_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *storage)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct fe_hw_stats *hwstats = priv->hw_stats;
+ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
+ unsigned int start;
+
+ if (!base) {
+ netdev_stats_to_stats64(storage, &dev->stats);
+ return storage;
+ }
+
+ if (netif_running(dev) && netif_device_present(dev)) {
+ if (spin_trylock(&hwstats->stats_lock)) {
+ fe_stats_update(priv);
+ spin_unlock(&hwstats->stats_lock);
+ }
+ }
+
+ do {
+ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
+ storage->rx_packets = hwstats->rx_packets;
+ storage->tx_packets = hwstats->tx_packets;
+ storage->rx_bytes = hwstats->rx_bytes;
+ storage->tx_bytes = hwstats->tx_bytes;
+ storage->collisions = hwstats->tx_collisions;
+ storage->rx_length_errors = hwstats->rx_short_errors +
+ hwstats->rx_long_errors;
+ storage->rx_over_errors = hwstats->rx_overflow;
+ storage->rx_crc_errors = hwstats->rx_fcs_errors;
+ storage->rx_errors = hwstats->rx_checksum_errors;
+ storage->tx_aborted_errors = hwstats->tx_skip;
+ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
+
+ storage->tx_errors = priv->netdev->stats.tx_errors;
+ storage->rx_dropped = priv->netdev->stats.rx_dropped;
+ storage->tx_dropped = priv->netdev->stats.tx_dropped;
+
+ return storage;
+}
+
+static int fe_vlan_rx_add_vid(struct net_device *dev,
+ __be16 proto, u16 vid)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ u32 idx = (vid & 0xf);
+ u32 vlan_cfg;
+
+ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
+ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
+ return 0;
+
+ if (test_bit(idx, &priv->vlan_map)) {
+ netdev_warn(dev, "disable tx vlan offload\n");
+ dev->wanted_features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+ netdev_update_features(dev);
+ } else {
+ vlan_cfg = fe_r32(fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
+ ((idx >> 1) << 2));
+ if (idx & 0x1) {
+ vlan_cfg &= 0xffff;
+ vlan_cfg |= (vid << 16);
+ } else {
+ vlan_cfg &= 0xffff0000;
+ vlan_cfg |= vid;
+ }
+ fe_w32(vlan_cfg, fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
+ ((idx >> 1) << 2));
+ set_bit(idx, &priv->vlan_map);
+ }
+
+ return 0;
+}
+
+static int fe_vlan_rx_kill_vid(struct net_device *dev,
+ __be16 proto, u16 vid)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ u32 idx = (vid & 0xf);
+
+ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
+ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
+ return 0;
+
+ clear_bit(idx, &priv->vlan_map);
+
+ return 0;
+}
+
+static inline u32 fe_empty_txd(struct fe_tx_ring *ring)
+{
+ barrier();
+ return (u32)(ring->tx_ring_size -
+ ((ring->tx_next_idx - ring->tx_free_idx) &
+ (ring->tx_ring_size - 1)));
+}
+
+static int fe_tx_map_dma(struct sk_buff *skb, struct net_device *dev,
+ int tx_num, struct fe_tx_ring *ring)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct skb_frag_struct *frag;
+ struct fe_tx_dma txd, *ptxd;
+ struct fe_tx_buf *tx_buf;
+ dma_addr_t mapped_addr;
+ unsigned int nr_frags;
+ u32 def_txd4;
+ int i, j, k, frag_size, frag_map_size, offset;
+
+ tx_buf = &ring->tx_buf[ring->tx_next_idx];
+ memset(tx_buf, 0, sizeof(*tx_buf));
+ memset(&txd, 0, sizeof(txd));
+ nr_frags = skb_shinfo(skb)->nr_frags;
+
+ /* init tx descriptor */
+ if (priv->soc->tx_dma)
+ priv->soc->tx_dma(&txd);
+ else
+ txd.txd4 = TX_DMA_DESP4_DEF;
+ def_txd4 = txd.txd4;
+
+ /* TX Checksum offload */
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ txd.txd4 |= TX_DMA_CHKSUM;
+
+ /* VLAN header offload */
+ if (skb_vlan_tag_present(skb)) {
+ u16 tag = skb_vlan_tag_get(skb);
+
+ if (IS_ENABLED(CONFIG_SOC_MT7621))
+ txd.txd4 |= TX_DMA_INS_VLAN_MT7621 | tag;
+ else
+ txd.txd4 |= TX_DMA_INS_VLAN |
+ ((tag >> VLAN_PRIO_SHIFT) << 4) |
+ (tag & 0xF);
+ }
+
+ /* TSO: fill MSS info in tcp checksum field */
+ if (skb_is_gso(skb)) {
+ if (skb_cow_head(skb, 0)) {
+ netif_warn(priv, tx_err, dev,
+ "GSO expand head fail.\n");
+ goto err_out;
+ }
+ if (skb_shinfo(skb)->gso_type &
+ (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
+ txd.txd4 |= TX_DMA_TSO;
+ tcp_hdr(skb)->check = htons(skb_shinfo(skb)->gso_size);
+ }
+ }
+
+ mapped_addr = dma_map_single(&dev->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
+ goto err_out;
+ txd.txd1 = mapped_addr;
+ txd.txd2 = TX_DMA_PLEN0(skb_headlen(skb));
+
+ tx_buf->flags |= FE_TX_FLAGS_SINGLE0;
+ dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr);
+ dma_unmap_len_set(tx_buf, dma_len0, skb_headlen(skb));
+
+ /* TX SG offload */
+ j = ring->tx_next_idx;
+ k = 0;
+ for (i = 0; i < nr_frags; i++) {
+ offset = 0;
+ frag = &skb_shinfo(skb)->frags[i];
+ frag_size = skb_frag_size(frag);
+
+ while (frag_size > 0) {
+ frag_map_size = min(frag_size, TX_DMA_BUF_LEN);
+ mapped_addr = skb_frag_dma_map(&dev->dev, frag, offset,
+ frag_map_size,
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
+ goto err_dma;
+
+ if (k & 0x1) {
+ j = NEXT_TX_DESP_IDX(j);
+ txd.txd1 = mapped_addr;
+ txd.txd2 = TX_DMA_PLEN0(frag_map_size);
+ txd.txd4 = def_txd4;
+
+ tx_buf = &ring->tx_buf[j];
+ memset(tx_buf, 0, sizeof(*tx_buf));
+
+ tx_buf->flags |= FE_TX_FLAGS_PAGE0;
+ dma_unmap_addr_set(tx_buf, dma_addr0,
+ mapped_addr);
+ dma_unmap_len_set(tx_buf, dma_len0,
+ frag_map_size);
+ } else {
+ txd.txd3 = mapped_addr;
+ txd.txd2 |= TX_DMA_PLEN1(frag_map_size);
+
+ tx_buf->skb = (struct sk_buff *)DMA_DUMMY_DESC;
+ tx_buf->flags |= FE_TX_FLAGS_PAGE1;
+ dma_unmap_addr_set(tx_buf, dma_addr1,
+ mapped_addr);
+ dma_unmap_len_set(tx_buf, dma_len1,
+ frag_map_size);
+
+ if (!((i == (nr_frags - 1)) &&
+ (frag_map_size == frag_size))) {
+ fe_set_txd(&txd, &ring->tx_dma[j]);
+ memset(&txd, 0, sizeof(txd));
+ }
+ }
+ frag_size -= frag_map_size;
+ offset += frag_map_size;
+ k++;
+ }
+ }
+
+ /* set last segment */
+ if (k & 0x1)
+ txd.txd2 |= TX_DMA_LS1;
+ else
+ txd.txd2 |= TX_DMA_LS0;
+ fe_set_txd(&txd, &ring->tx_dma[j]);
+
+ /* store skb to cleanup */
+ tx_buf->skb = skb;
+
+ netdev_sent_queue(dev, skb->len);
+ skb_tx_timestamp(skb);
+
+ ring->tx_next_idx = NEXT_TX_DESP_IDX(j);
+ /* make sure that all changes to the dma ring are flushed before we
+ * continue
+ */
+ wmb();
+ if (unlikely(fe_empty_txd(ring) <= ring->tx_thresh)) {
+ netif_stop_queue(dev);
+ smp_mb();
+ if (unlikely(fe_empty_txd(ring) > ring->tx_thresh))
+ netif_wake_queue(dev);
+ }
+
+ if (netif_xmit_stopped(netdev_get_tx_queue(dev, 0)) || !skb->xmit_more)
+ fe_reg_w32(ring->tx_next_idx, FE_REG_TX_CTX_IDX0);
+
+ return 0;
+
+err_dma:
+ j = ring->tx_next_idx;
+ for (i = 0; i < tx_num; i++) {
+ ptxd = &ring->tx_dma[j];
+ tx_buf = &ring->tx_buf[j];
+
+ /* unmap dma */
+ fe_txd_unmap(&dev->dev, tx_buf);
+
+ ptxd->txd2 = TX_DMA_DESP2_DEF;
+ j = NEXT_TX_DESP_IDX(j);
+ }
+ /* make sure that all changes to the dma ring are flushed before we
+ * continue
+ */
+ wmb();
+
+err_out:
+ return -1;
+}
+
+static inline int fe_skb_padto(struct sk_buff *skb, struct fe_priv *priv)
+{
+ unsigned int len;
+ int ret;
+
+ ret = 0;
+ if (unlikely(skb->len < VLAN_ETH_ZLEN)) {
+ if ((priv->flags & FE_FLAG_PADDING_64B) &&
+ !(priv->flags & FE_FLAG_PADDING_BUG))
+ return ret;
+
+ if (skb_vlan_tag_present(skb))
+ len = ETH_ZLEN;
+ else if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
+ len = VLAN_ETH_ZLEN;
+ else if (!(priv->flags & FE_FLAG_PADDING_64B))
+ len = ETH_ZLEN;
+ else
+ return ret;
+
+ if (skb->len < len) {
+ ret = skb_pad(skb, len - skb->len);
+ if (ret < 0)
+ return ret;
+ skb->len = len;
+ skb_set_tail_pointer(skb, len);
+ }
+ }
+
+ return ret;
+}
+
+static inline int fe_cal_txd_req(struct sk_buff *skb)
+{
+ int i, nfrags;
+ struct skb_frag_struct *frag;
+
+ nfrags = 1;
+ if (skb_is_gso(skb)) {
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ frag = &skb_shinfo(skb)->frags[i];
+ nfrags += DIV_ROUND_UP(frag->size, TX_DMA_BUF_LEN);
+ }
+ } else {
+ nfrags += skb_shinfo(skb)->nr_frags;
+ }
+
+ return DIV_ROUND_UP(nfrags, 2);
+}
+
+static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct fe_tx_ring *ring = &priv->tx_ring;
+ struct net_device_stats *stats = &dev->stats;
+ int tx_num;
+ int len = skb->len;
+
+ if (fe_skb_padto(skb, priv)) {
+ netif_warn(priv, tx_err, dev, "tx padding failed!\n");
+ return NETDEV_TX_OK;
+ }
+
+ tx_num = fe_cal_txd_req(skb);
+ if (unlikely(fe_empty_txd(ring) <= tx_num)) {
+ netif_stop_queue(dev);
+ netif_err(priv, tx_queued, dev,
+ "Tx Ring full when queue awake!\n");
+ return NETDEV_TX_BUSY;
+ }
+
+ if (fe_tx_map_dma(skb, dev, tx_num, ring) < 0) {
+ stats->tx_dropped++;
+ } else {
+ stats->tx_packets++;
+ stats->tx_bytes += len;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int fe_poll_rx(struct napi_struct *napi, int budget,
+ struct fe_priv *priv, u32 rx_intr)
+{
+ struct net_device *netdev = priv->netdev;
+ struct net_device_stats *stats = &netdev->stats;
+ struct fe_soc_data *soc = priv->soc;
+ struct fe_rx_ring *ring = &priv->rx_ring;
+ int idx = ring->rx_calc_idx;
+ u32 checksum_bit;
+ struct sk_buff *skb;
+ u8 *data, *new_data;
+ struct fe_rx_dma *rxd, trxd;
+ int done = 0, pad;
+
+ if (netdev->features & NETIF_F_RXCSUM)
+ checksum_bit = soc->checksum_bit;
+ else
+ checksum_bit = 0;
+
+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
+ pad = 0;
+ else
+ pad = NET_IP_ALIGN;
+
+ while (done < budget) {
+ unsigned int pktlen;
+ dma_addr_t dma_addr;
+
+ idx = NEXT_RX_DESP_IDX(idx);
+ rxd = &ring->rx_dma[idx];
+ data = ring->rx_data[idx];
+
+ fe_get_rxd(&trxd, rxd);
+ if (!(trxd.rxd2 & RX_DMA_DONE))
+ break;
+
+ /* alloc new buffer */
+ new_data = netdev_alloc_frag(ring->frag_size);
+ if (unlikely(!new_data)) {
+ stats->rx_dropped++;
+ goto release_desc;
+ }
+ dma_addr = dma_map_single(&netdev->dev,
+ new_data + NET_SKB_PAD + pad,
+ ring->rx_buf_size,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) {
+ put_page(virt_to_head_page(new_data));
+ goto release_desc;
+ }
+
+ /* receive data */
+ skb = build_skb(data, ring->frag_size);
+ if (unlikely(!skb)) {
+ put_page(virt_to_head_page(new_data));
+ goto release_desc;
+ }
+ skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
+
+ dma_unmap_single(&netdev->dev, trxd.rxd1,
+ ring->rx_buf_size, DMA_FROM_DEVICE);
+ pktlen = RX_DMA_GET_PLEN0(trxd.rxd2);
+ skb->dev = netdev;
+ skb_put(skb, pktlen);
+ if (trxd.rxd4 & checksum_bit)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb_checksum_none_assert(skb);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ stats->rx_packets++;
+ stats->rx_bytes += pktlen;
+
+ napi_gro_receive(napi, skb);
+
+ ring->rx_data[idx] = new_data;
+ rxd->rxd1 = (unsigned int)dma_addr;
+
+release_desc:
+ if (priv->flags & FE_FLAG_RX_SG_DMA)
+ rxd->rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
+ else
+ rxd->rxd2 = RX_DMA_LSO;
+
+ ring->rx_calc_idx = idx;
+ /* make sure that all changes to the dma ring are flushed before
+ * we continue
+ */
+ wmb();
+ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
+ done++;
+ }
+
+ if (done < budget)
+ fe_reg_w32(rx_intr, FE_REG_FE_INT_STATUS);
+
+ return done;
+}
+
+static int fe_poll_tx(struct fe_priv *priv, int budget, u32 tx_intr,
+ int *tx_again)
+{
+ struct net_device *netdev = priv->netdev;
+ struct device *dev = &netdev->dev;
+ unsigned int bytes_compl = 0;
+ struct sk_buff *skb;
+ struct fe_tx_buf *tx_buf;
+ int done = 0;
+ u32 idx, hwidx;
+ struct fe_tx_ring *ring = &priv->tx_ring;
+
+ idx = ring->tx_free_idx;
+ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
+
+ while ((idx != hwidx) && budget) {
+ tx_buf = &ring->tx_buf[idx];
+ skb = tx_buf->skb;
+
+ if (!skb)
+ break;
+
+ if (skb != (struct sk_buff *)DMA_DUMMY_DESC) {
+ bytes_compl += skb->len;
+ done++;
+ budget--;
+ }
+ fe_txd_unmap(dev, tx_buf);
+ idx = NEXT_TX_DESP_IDX(idx);
+ }
+ ring->tx_free_idx = idx;
+
+ if (idx == hwidx) {
+ /* read hw index again make sure no new tx packet */
+ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
+ if (idx == hwidx)
+ fe_reg_w32(tx_intr, FE_REG_FE_INT_STATUS);
+ else
+ *tx_again = 1;
+ } else {
+ *tx_again = 1;
+ }
+
+ if (done) {
+ netdev_completed_queue(netdev, done, bytes_compl);
+ smp_mb();
+ if (unlikely(netif_queue_stopped(netdev) &&
+ (fe_empty_txd(ring) > ring->tx_thresh)))
+ netif_wake_queue(netdev);
+ }
+
+ return done;
+}
+
+static int fe_poll(struct napi_struct *napi, int budget)
+{
+ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
+ struct fe_hw_stats *hwstat = priv->hw_stats;
+ int tx_done, rx_done, tx_again;
+ u32 status, fe_status, status_reg, mask;
+ u32 tx_intr, rx_intr, status_intr;
+
+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
+ fe_status = status;
+ tx_intr = priv->soc->tx_int;
+ rx_intr = priv->soc->rx_int;
+ status_intr = priv->soc->status_int;
+ tx_done = 0;
+ rx_done = 0;
+ tx_again = 0;
+
+ if (fe_reg_table[FE_REG_FE_INT_STATUS2]) {
+ fe_status = fe_reg_r32(FE_REG_FE_INT_STATUS2);
+ status_reg = FE_REG_FE_INT_STATUS2;
+ } else {
+ status_reg = FE_REG_FE_INT_STATUS;
+ }
+
+ if (status & tx_intr)
+ tx_done = fe_poll_tx(priv, budget, tx_intr, &tx_again);
+
+ if (status & rx_intr)
+ rx_done = fe_poll_rx(napi, budget, priv, rx_intr);
+
+ if (unlikely(fe_status & status_intr)) {
+ if (hwstat && spin_trylock(&hwstat->stats_lock)) {
+ fe_stats_update(priv);
+ spin_unlock(&hwstat->stats_lock);
+ }
+ fe_reg_w32(status_intr, status_reg);
+ }
+
+ if (unlikely(netif_msg_intr(priv))) {
+ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
+ netdev_info(priv->netdev,
+ "done tx %d, rx %d, intr 0x%08x/0x%x\n",
+ tx_done, rx_done, status, mask);
+ }
+
+ if (!tx_again && (rx_done < budget)) {
+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
+ if (status & (tx_intr | rx_intr)) {
+ /* let napi poll again */
+ rx_done = budget;
+ goto poll_again;
+ }
+
+ napi_complete(napi);
+ fe_int_enable(tx_intr | rx_intr);
+ } else {
+ rx_done = budget;
+ }
+
+poll_again:
+ return rx_done;
+}
+
+static void fe_tx_timeout(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct fe_tx_ring *ring = &priv->tx_ring;
+
+ priv->netdev->stats.tx_errors++;
+ netif_err(priv, tx_err, dev,
+ "transmit timed out\n");
+ netif_info(priv, drv, dev, "dma_cfg:%08x\n",
+ fe_reg_r32(FE_REG_PDMA_GLO_CFG));
+ netif_info(priv, drv, dev, "tx_ring=%d, "
+ "base=%08x, max=%u, ctx=%u, dtx=%u, fdx=%hu, next=%hu\n",
+ 0, fe_reg_r32(FE_REG_TX_BASE_PTR0),
+ fe_reg_r32(FE_REG_TX_MAX_CNT0),
+ fe_reg_r32(FE_REG_TX_CTX_IDX0),
+ fe_reg_r32(FE_REG_TX_DTX_IDX0),
+ ring->tx_free_idx,
+ ring->tx_next_idx);
+ netif_info(priv, drv, dev,
+ "rx_ring=%d, base=%08x, max=%u, calc=%u, drx=%u\n",
+ 0, fe_reg_r32(FE_REG_RX_BASE_PTR0),
+ fe_reg_r32(FE_REG_RX_MAX_CNT0),
+ fe_reg_r32(FE_REG_RX_CALC_IDX0),
+ fe_reg_r32(FE_REG_RX_DRX_IDX0));
+
+ if (!test_and_set_bit(FE_FLAG_RESET_PENDING, priv->pending_flags))
+ schedule_work(&priv->pending_work);
+}
+
+static irqreturn_t fe_handle_irq(int irq, void *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ u32 status, int_mask;
+
+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
+
+ if (unlikely(!status))
+ return IRQ_NONE;
+
+ int_mask = (priv->soc->rx_int | priv->soc->tx_int);
+ if (likely(status & int_mask)) {
+ if (likely(napi_schedule_prep(&priv->rx_napi))) {
+ fe_int_disable(int_mask);
+ __napi_schedule(&priv->rx_napi);
+ }
+ } else {
+ fe_reg_w32(status, FE_REG_FE_INT_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void fe_poll_controller(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ u32 int_mask = priv->soc->tx_int | priv->soc->rx_int;
+
+ fe_int_disable(int_mask);
+ fe_handle_irq(dev->irq, dev);
+ fe_int_enable(int_mask);
+}
+#endif
+
+int fe_set_clock_cycle(struct fe_priv *priv)
+{
+ unsigned long sysclk = priv->sysclk;
+
+ sysclk /= FE_US_CYC_CNT_DIVISOR;
+ sysclk <<= FE_US_CYC_CNT_SHIFT;
+
+ fe_w32((fe_r32(FE_FE_GLO_CFG) &
+ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) |
+ sysclk,
+ FE_FE_GLO_CFG);
+ return 0;
+}
+
+void fe_fwd_config(struct fe_priv *priv)
+{
+ u32 fwd_cfg;
+
+ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
+
+ /* disable jumbo frame */
+ if (priv->flags & FE_FLAG_JUMBO_FRAME)
+ fwd_cfg &= ~FE_GDM1_JMB_EN;
+
+ /* set unicast/multicast/broadcast frame to cpu */
+ fwd_cfg &= ~0xffff;
+
+ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
+}
+
+static void fe_rxcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN |
+ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
+ FE_GDMA1_FWD_CFG);
+ else
+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~(FE_GDM1_ICS_EN |
+ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
+ FE_GDMA1_FWD_CFG);
+}
+
+static void fe_txcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN |
+ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
+ FE_CDMA_CSG_CFG);
+ else
+ fe_w32(fe_r32(FE_CDMA_CSG_CFG) & ~(FE_ICS_GEN_EN |
+ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
+ FE_CDMA_CSG_CFG);
+}
+
+void fe_csum_config(struct fe_priv *priv)
+{
+ struct net_device *dev = priv_netdev(priv);
+
+ fe_txcsum_config((dev->features & NETIF_F_IP_CSUM));
+ fe_rxcsum_config((dev->features & NETIF_F_RXCSUM));
+}
+
+static int fe_hw_init(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ int i, err;
+
+ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
+ dev_name(priv->device), dev);
+ if (err)
+ return err;
+
+ if (priv->soc->set_mac)
+ priv->soc->set_mac(priv, dev->dev_addr);
+ else
+ fe_hw_set_macaddr(priv, dev->dev_addr);
+
+ /* disable delay interrupt */
+ fe_reg_w32(0, FE_REG_DLY_INT_CFG);
+
+ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
+
+ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc */
+ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
+ for (i = 0; i < 16; i += 2)
+ fe_w32(((i + 1) << 16) + i,
+ fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
+ (i * 2));
+
+ if (priv->soc->fwd_config(priv))
+ netdev_err(dev, "unable to get clock\n");
+
+ if (fe_reg_table[FE_REG_FE_RST_GL]) {
+ fe_reg_w32(1, FE_REG_FE_RST_GL);
+ fe_reg_w32(0, FE_REG_FE_RST_GL);
+ }
+
+ return 0;
+}
+
+static int fe_open(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ u32 val;
+ int err;
+
+ err = fe_init_dma(priv);
+ if (err) {
+ fe_free_dma(priv);
+ return err;
+ }
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+
+ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
+ val |= FE_RX_2B_OFFSET;
+ val |= priv->soc->pdma_glo_cfg;
+ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
+
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+
+ if (priv->phy)
+ priv->phy->start(priv);
+
+ if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
+ netif_carrier_on(dev);
+
+ napi_enable(&priv->rx_napi);
+ fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int fe_stop(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ int i;
+
+ netif_tx_disable(dev);
+ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
+ napi_disable(&priv->rx_napi);
+
+ if (priv->phy)
+ priv->phy->stop(priv);
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+
+ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
+ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
+ FE_REG_PDMA_GLO_CFG);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+
+ /* wait dma stop */
+ for (i = 0; i < 10; i++) {
+ if (fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
+ (FE_TX_DMA_BUSY | FE_RX_DMA_BUSY)) {
+ msleep(20);
+ continue;
+ }
+ break;
+ }
+
+ fe_free_dma(priv);
+
+ return 0;
+}
+
+static int __init fe_init(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ struct device_node *port;
+ const char *mac_addr;
+ int err;
+
+ priv->soc->reset_fe();
+
+ if (priv->soc->switch_init)
+ if (priv->soc->switch_init(priv)) {
+ netdev_err(dev, "failed to initialize switch core\n");
+ return -ENODEV;
+ }
+
+ mac_addr = of_get_mac_address(priv->device->of_node);
+ if (mac_addr)
+ ether_addr_copy(dev->dev_addr, mac_addr);
+
+ /* If the mac address is invalid, use random mac address */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ random_ether_addr(dev->dev_addr);
+ dev_err(priv->device, "generated random MAC address %pM\n",
+ dev->dev_addr);
+ }
+
+ err = fe_mdio_init(priv);
+ if (err)
+ return err;
+
+ if (priv->soc->port_init)
+ for_each_child_of_node(priv->device->of_node, port)
+ if (of_device_is_compatible(port, "mediatek,eth-port") &&
+ of_device_is_available(port))
+ priv->soc->port_init(priv, port);
+
+ if (priv->phy) {
+ err = priv->phy->connect(priv);
+ if (err)
+ goto err_phy_disconnect;
+ }
+
+ err = fe_hw_init(dev);
+ if (err)
+ goto err_phy_disconnect;
+
+ if ((priv->flags & FE_FLAG_HAS_SWITCH) && priv->soc->switch_config)
+ priv->soc->switch_config(priv);
+
+ return 0;
+
+err_phy_disconnect:
+ if (priv->phy)
+ priv->phy->disconnect(priv);
+ fe_mdio_cleanup(priv);
+
+ return err;
+}
+
+static void fe_uninit(struct net_device *dev)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if (priv->phy)
+ priv->phy->disconnect(priv);
+ fe_mdio_cleanup(priv);
+
+ fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
+ free_irq(dev->irq, dev);
+}
+
+static int fe_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+
+ if (!priv->phy_dev)
+ return -ENODEV;
+
+ switch (cmd) {
+ case SIOCETHTOOL:
+ return phy_ethtool_ioctl(priv->phy_dev,
+ (void *) ifr->ifr_data);
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return phy_mii_ioctl(priv->phy_dev, ifr, cmd);
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int fe_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct fe_priv *priv = netdev_priv(dev);
+ int frag_size, old_mtu;
+ u32 fwd_cfg;
+
+ if (!(priv->flags & FE_FLAG_JUMBO_FRAME))
+ return eth_change_mtu(dev, new_mtu);
+
+ frag_size = fe_max_frag_size(new_mtu);
+ if (new_mtu < 68 || frag_size > PAGE_SIZE)
+ return -EINVAL;
+
+ old_mtu = dev->mtu;
+ dev->mtu = new_mtu;
+
+ /* return early if the buffer sizes will not change */
+ if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
+ return 0;
+ if (old_mtu > ETH_DATA_LEN && new_mtu > ETH_DATA_LEN)
+ return 0;
+
+ if (new_mtu <= ETH_DATA_LEN)
+ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
+ else
+ priv->rx_ring.frag_size = PAGE_SIZE;
+ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
+
+ if (!netif_running(dev))
+ return 0;
+
+ fe_stop(dev);
+ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
+ if (new_mtu <= ETH_DATA_LEN) {
+ fwd_cfg &= ~FE_GDM1_JMB_EN;
+ } else {
+ fwd_cfg &= ~(FE_GDM1_JMB_LEN_MASK << FE_GDM1_JMB_LEN_SHIFT);
+ fwd_cfg |= (DIV_ROUND_UP(frag_size, 1024) <<
+ FE_GDM1_JMB_LEN_SHIFT) | FE_GDM1_JMB_EN;
+ }
+ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
+
+ return fe_open(dev);
+}
+
+static const struct net_device_ops fe_netdev_ops = {
+ .ndo_init = fe_init,
+ .ndo_uninit = fe_uninit,
+ .ndo_open = fe_open,
+ .ndo_stop = fe_stop,
+ .ndo_start_xmit = fe_start_xmit,
+ .ndo_set_mac_address = fe_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = fe_do_ioctl,
+ .ndo_change_mtu = fe_change_mtu,
+ .ndo_tx_timeout = fe_tx_timeout,
+ .ndo_get_stats64 = fe_get_stats64,
+ .ndo_vlan_rx_add_vid = fe_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = fe_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = fe_poll_controller,
+#endif
+};
+
+static void fe_reset_pending(struct fe_priv *priv)
+{
+ struct net_device *dev = priv->netdev;
+ int err;
+
+ rtnl_lock();
+ fe_stop(dev);
+
+ err = fe_open(dev);
+ if (err) {
+ netif_alert(priv, ifup, dev,
+ "Driver up/down cycle failed, closing device.\n");
+ dev_close(dev);
+ }
+ rtnl_unlock();
+}
+
+static const struct fe_work_t fe_work[] = {
+ {FE_FLAG_RESET_PENDING, fe_reset_pending},
+};
+
+static void fe_pending_work(struct work_struct *work)
+{
+ struct fe_priv *priv = container_of(work, struct fe_priv, pending_work);
+ int i;
+ bool pending;
+
+ for (i = 0; i < ARRAY_SIZE(fe_work); i++) {
+ pending = test_and_clear_bit(fe_work[i].bitnr,
+ priv->pending_flags);
+ if (pending)
+ fe_work[i].action(priv);
+ }
+}
+
+static int fe_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const struct of_device_id *match;
+ struct fe_soc_data *soc;
+ struct net_device *netdev;
+ struct fe_priv *priv;
+ struct clk *sysclk;
+ int err, napi_weight;
+
+ device_reset(&pdev->dev);
+
+ match = of_match_device(of_fe_match, &pdev->dev);
+ soc = (struct fe_soc_data *)match->data;
+
+ if (soc->reg_table)
+ fe_reg_table = soc->reg_table;
+ else
+ soc->reg_table = fe_reg_table;
+
+ fe_base = devm_ioremap_resource(&pdev->dev, res);
+ if (!fe_base) {
+ err = -EADDRNOTAVAIL;
+ goto err_out;
+ }
+
+ netdev = alloc_etherdev(sizeof(*priv));
+ if (!netdev) {
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
+ err = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ netdev->netdev_ops = &fe_netdev_ops;
+ netdev->base_addr = (unsigned long)fe_base;
+
+ netdev->irq = platform_get_irq(pdev, 0);
+ if (netdev->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource found\n");
+ err = -ENXIO;
+ goto err_free_dev;
+ }
+
+ if (soc->init_data)
+ soc->init_data(soc, netdev);
+ netdev->vlan_features = netdev->hw_features & ~NETIF_F_HW_VLAN_CTAG_TX;
+ netdev->features |= netdev->hw_features;
+
+ /* fake rx vlan filter func. to support tx vlan offload func */
+ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ priv = netdev_priv(netdev);
+ spin_lock_init(&priv->page_lock);
+ if (fe_reg_table[FE_REG_FE_COUNTER_BASE]) {
+ priv->hw_stats = kzalloc(sizeof(*priv->hw_stats), GFP_KERNEL);
+ if (!priv->hw_stats) {
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+ spin_lock_init(&priv->hw_stats->stats_lock);
+ }
+
+ sysclk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(sysclk)) {
+ priv->sysclk = clk_get_rate(sysclk);
+ } else if ((priv->flags & FE_FLAG_CALIBRATE_CLK)) {
+ dev_err(&pdev->dev, "this soc needs a clk for calibration\n");
+ err = -ENXIO;
+ goto err_free_dev;
+ }
+
+ priv->switch_np = of_parse_phandle(pdev->dev.of_node, "mediatek,switch", 0);
+ if ((priv->flags & FE_FLAG_HAS_SWITCH) && !priv->switch_np) {
+ dev_err(&pdev->dev, "failed to read switch phandle\n");
+ err = -ENODEV;
+ goto err_free_dev;
+ }
+
+ priv->netdev = netdev;
+ priv->device = &pdev->dev;
+ priv->soc = soc;
+ priv->msg_enable = netif_msg_init(fe_msg_level, FE_DEFAULT_MSG_ENABLE);
+ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
+ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
+ priv->tx_ring.tx_ring_size = NUM_DMA_DESC;
+ priv->rx_ring.rx_ring_size = NUM_DMA_DESC;
+ INIT_WORK(&priv->pending_work, fe_pending_work);
+
+ napi_weight = 32;
+ if (priv->flags & FE_FLAG_NAPI_WEIGHT) {
+ napi_weight *= 4;
+ priv->tx_ring.tx_ring_size *= 4;
+ priv->rx_ring.rx_ring_size *= 4;
+ }
+ netif_napi_add(netdev, &priv->rx_napi, fe_poll, napi_weight);
+ fe_set_ethtool_ops(netdev);
+
+ err = register_netdev(netdev);
+ if (err) {
+ dev_err(&pdev->dev, "error bringing up device\n");
+ goto err_free_dev;
+ }
+
+ platform_set_drvdata(pdev, netdev);
+
+ netif_info(priv, probe, netdev, "mediatek frame engine at 0x%08lx, irq %d\n",
+ netdev->base_addr, netdev->irq);
+
+ return 0;
+
+err_free_dev:
+ free_netdev(netdev);
+err_iounmap:
+ devm_iounmap(&pdev->dev, fe_base);
+err_out:
+ return err;
+}
+
+static int fe_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct fe_priv *priv = netdev_priv(dev);
+
+ netif_napi_del(&priv->rx_napi);
+ kfree(priv->hw_stats);
+
+ cancel_work_sync(&priv->pending_work);
+
+ unregister_netdev(dev);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver fe_driver = {
+ .probe = fe_probe,
+ .remove = fe_remove,
+ .driver = {
+ .name = "mtk_soc_eth",
+ .owner = THIS_MODULE,
+ .of_match_table = of_fe_match,
+ },
+};
+
+module_platform_driver(fe_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
+MODULE_VERSION(MTK_FE_DRV_VERSION);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.h b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.h
new file mode 100644
index 0000000..05f550f
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mtk_eth_soc.h
@@ -0,0 +1,523 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#ifndef FE_ETH_H
+#define FE_ETH_H
+
+#include <linux/mii.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/phy.h>
+#include <linux/ethtool.h>
+#include <linux/version.h>
+
+enum fe_reg {
+ FE_REG_PDMA_GLO_CFG = 0,
+ FE_REG_PDMA_RST_CFG,
+ FE_REG_DLY_INT_CFG,
+ FE_REG_TX_BASE_PTR0,
+ FE_REG_TX_MAX_CNT0,
+ FE_REG_TX_CTX_IDX0,
+ FE_REG_TX_DTX_IDX0,
+ FE_REG_RX_BASE_PTR0,
+ FE_REG_RX_MAX_CNT0,
+ FE_REG_RX_CALC_IDX0,
+ FE_REG_RX_DRX_IDX0,
+ FE_REG_FE_INT_ENABLE,
+ FE_REG_FE_INT_STATUS,
+ FE_REG_FE_DMA_VID_BASE,
+ FE_REG_FE_COUNTER_BASE,
+ FE_REG_FE_RST_GL,
+ FE_REG_FE_INT_STATUS2,
+ FE_REG_COUNT
+};
+
+enum fe_work_flag {
+ FE_FLAG_RESET_PENDING,
+ FE_FLAG_MAX
+};
+
+#define MTK_FE_DRV_VERSION "0.1.2"
+
+/* power of 2 to let NEXT_TX_DESP_IDX work */
+#define NUM_DMA_DESC BIT(7)
+#define MAX_DMA_DESC 0xfff
+
+#define FE_DELAY_EN_INT 0x80
+#define FE_DELAY_MAX_INT 0x04
+#define FE_DELAY_MAX_TOUT 0x04
+#define FE_DELAY_TIME 20
+#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | \
+ FE_DELAY_MAX_TOUT)
+#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
+#define FE_PSE_FQFC_CFG_INIT 0x80504000
+#define FE_PSE_FQFC_CFG_256Q 0xff908000
+
+/* interrupt bits */
+#define FE_CNT_PPE_AF BIT(31)
+#define FE_CNT_GDM_AF BIT(29)
+#define FE_PSE_P2_FC BIT(26)
+#define FE_PSE_BUF_DROP BIT(24)
+#define FE_GDM_OTHER_DROP BIT(23)
+#define FE_PSE_P1_FC BIT(22)
+#define FE_PSE_P0_FC BIT(21)
+#define FE_PSE_FQ_EMPTY BIT(20)
+#define FE_GE1_STA_CHG BIT(18)
+#define FE_TX_COHERENT BIT(17)
+#define FE_RX_COHERENT BIT(16)
+#define FE_TX_DONE_INT3 BIT(11)
+#define FE_TX_DONE_INT2 BIT(10)
+#define FE_TX_DONE_INT1 BIT(9)
+#define FE_TX_DONE_INT0 BIT(8)
+#define FE_RX_DONE_INT0 BIT(2)
+#define FE_TX_DLY_INT BIT(1)
+#define FE_RX_DLY_INT BIT(0)
+
+#define FE_RX_DONE_INT FE_RX_DONE_INT0
+#define FE_TX_DONE_INT (FE_TX_DONE_INT0 | FE_TX_DONE_INT1 | \
+ FE_TX_DONE_INT2 | FE_TX_DONE_INT3)
+
+#define RT5350_RX_DLY_INT BIT(30)
+#define RT5350_TX_DLY_INT BIT(28)
+#define RT5350_RX_DONE_INT1 BIT(17)
+#define RT5350_RX_DONE_INT0 BIT(16)
+#define RT5350_TX_DONE_INT3 BIT(3)
+#define RT5350_TX_DONE_INT2 BIT(2)
+#define RT5350_TX_DONE_INT1 BIT(1)
+#define RT5350_TX_DONE_INT0 BIT(0)
+
+#define RT5350_RX_DONE_INT (RT5350_RX_DONE_INT0 | RT5350_RX_DONE_INT1)
+#define RT5350_TX_DONE_INT (RT5350_TX_DONE_INT0 | RT5350_TX_DONE_INT1 | \
+ RT5350_TX_DONE_INT2 | RT5350_TX_DONE_INT3)
+
+/* registers */
+#define FE_FE_OFFSET 0x0000
+#define FE_GDMA_OFFSET 0x0020
+#define FE_PSE_OFFSET 0x0040
+#define FE_GDMA2_OFFSET 0x0060
+#define FE_CDMA_OFFSET 0x0080
+#define FE_DMA_VID0 0x00a8
+#define FE_PDMA_OFFSET 0x0100
+#define FE_PPE_OFFSET 0x0200
+#define FE_CMTABLE_OFFSET 0x0400
+#define FE_POLICYTABLE_OFFSET 0x1000
+
+#define RT5350_PDMA_OFFSET 0x0800
+#define RT5350_SDM_OFFSET 0x0c00
+
+#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00)
+#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04)
+#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08)
+#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C)
+#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10)
+#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14)
+#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18)
+#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C)
+
+#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00)
+#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04)
+#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08)
+#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C)
+#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10)
+
+#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00)
+#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04)
+#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08)
+#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C)
+#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10)
+
+#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00)
+#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04)
+#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08)
+#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C)
+
+#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00)
+#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04)
+
+#ifdef CONFIG_SOC_MT7621
+#define MT7620A_GDMA_OFFSET 0x0500
+#else
+#define MT7620A_GDMA_OFFSET 0x0600
+#endif
+#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00)
+#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04)
+#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08)
+#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C)
+#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10)
+
+#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
+#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
+#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
+#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
+#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
+#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
+#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
+#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
+#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
+#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
+#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
+#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
+#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
+#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
+#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
+#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
+#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
+#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
+#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
+#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
+#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
+#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
+#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
+#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
+#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
+#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
+#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
+#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
+#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
+#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
+
+#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00)
+#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04)
+#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08)
+#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C)
+#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10)
+#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14)
+#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18)
+#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C)
+#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20)
+#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24)
+#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28)
+#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C)
+#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30)
+#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34)
+#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38)
+#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C)
+#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40)
+#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44)
+#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48)
+#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C)
+#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50)
+#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54)
+#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58)
+#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C)
+#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60)
+#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64)
+#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68)
+#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C)
+
+/* Switch DMA configuration */
+#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00)
+#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04)
+#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08)
+#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C)
+#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10)
+#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100)
+#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104)
+#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108)
+#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C)
+#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110)
+
+#define RT5350_SDM_ICS_EN BIT(16)
+#define RT5350_SDM_TCS_EN BIT(17)
+#define RT5350_SDM_UCS_EN BIT(18)
+
+/* MDIO_CFG register bits */
+#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29)
+#define FE_MDIO_CFG_GP1_BP_EN BIT(16)
+#define FE_MDIO_CFG_GP1_FRC_EN BIT(15)
+#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13)
+#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13)
+#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
+#define FE_MDIO_CFG_GP1_DUPLEX BIT(12)
+#define FE_MDIO_CFG_GP1_FC_TX BIT(11)
+#define FE_MDIO_CFG_GP1_FC_RX BIT(10)
+#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9)
+#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8)
+#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
+#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
+#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
+#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
+#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5)
+#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4)
+#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
+#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
+#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
+#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
+#define FE_MDIO_CFG_TX_CLK_SKEW_0 0
+#define FE_MDIO_CFG_TX_CLK_SKEW_200 1
+#define FE_MDIO_CFG_TX_CLK_SKEW_400 2
+#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3
+
+/* uni-cast port */
+#define FE_GDM1_JMB_LEN_MASK 0xf
+#define FE_GDM1_JMB_LEN_SHIFT 28
+#define FE_GDM1_ICS_EN BIT(22)
+#define FE_GDM1_TCS_EN BIT(21)
+#define FE_GDM1_UCS_EN BIT(20)
+#define FE_GDM1_JMB_EN BIT(19)
+#define FE_GDM1_STRPCRC BIT(16)
+#define FE_GDM1_UFRC_P_CPU (0 << 12)
+#define FE_GDM1_UFRC_P_GDMA1 (1 << 12)
+#define FE_GDM1_UFRC_P_PPE (6 << 12)
+
+/* checksums */
+#define FE_ICS_GEN_EN BIT(2)
+#define FE_UCS_GEN_EN BIT(1)
+#define FE_TCS_GEN_EN BIT(0)
+
+/* dma ring */
+#define FE_PST_DRX_IDX0 BIT(16)
+#define FE_PST_DTX_IDX3 BIT(3)
+#define FE_PST_DTX_IDX2 BIT(2)
+#define FE_PST_DTX_IDX1 BIT(1)
+#define FE_PST_DTX_IDX0 BIT(0)
+
+#define FE_RX_2B_OFFSET BIT(31)
+#define FE_TX_WB_DDONE BIT(6)
+#define FE_RX_DMA_BUSY BIT(3)
+#define FE_TX_DMA_BUSY BIT(1)
+#define FE_RX_DMA_EN BIT(2)
+#define FE_TX_DMA_EN BIT(0)
+
+#define FE_PDMA_SIZE_4DWORDS (0 << 4)
+#define FE_PDMA_SIZE_8DWORDS (1 << 4)
+#define FE_PDMA_SIZE_16DWORDS (2 << 4)
+
+#define FE_US_CYC_CNT_MASK 0xff
+#define FE_US_CYC_CNT_SHIFT 0x8
+#define FE_US_CYC_CNT_DIVISOR 1000000
+
+/* rxd2 */
+#define RX_DMA_DONE BIT(31)
+#define RX_DMA_LSO BIT(30)
+#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
+#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
+#define RX_DMA_TAG BIT(15)
+/* rxd3 */
+#define RX_DMA_TPID(_x) (((_x) >> 16) & 0xffff)
+#define RX_DMA_VID(_x) ((_x) & 0xffff)
+/* rxd4 */
+#define RX_DMA_L4VALID BIT(30)
+
+struct fe_rx_dma {
+ unsigned int rxd1;
+ unsigned int rxd2;
+ unsigned int rxd3;
+ unsigned int rxd4;
+} __packed __aligned(4);
+
+#define TX_DMA_BUF_LEN 0x3fff
+#define TX_DMA_PLEN0_MASK (TX_DMA_BUF_LEN << 16)
+#define TX_DMA_PLEN0(_x) (((_x) & TX_DMA_BUF_LEN) << 16)
+#define TX_DMA_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
+#define TX_DMA_GET_PLEN0(_x) (((_x) >> 16) & TX_DMA_BUF_LEN)
+#define TX_DMA_GET_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
+#define TX_DMA_LS1 BIT(14)
+#define TX_DMA_LS0 BIT(30)
+#define TX_DMA_DONE BIT(31)
+
+#define TX_DMA_INS_VLAN_MT7621 BIT(16)
+#define TX_DMA_INS_VLAN BIT(7)
+#define TX_DMA_INS_PPPOE BIT(12)
+#define TX_DMA_QN(_x) ((_x) << 16)
+#define TX_DMA_PN(_x) ((_x) << 24)
+#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
+#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
+#define TX_DMA_UDF BIT(20)
+#define TX_DMA_CHKSUM (0x7 << 29)
+#define TX_DMA_TSO BIT(28)
+
+/* frame engine counters */
+#define FE_PPE_AC_BCNT0 (FE_CMTABLE_OFFSET + 0x00)
+#define FE_GDMA1_TX_GBCNT (FE_CMTABLE_OFFSET + 0x300)
+#define FE_GDMA2_TX_GBCNT (FE_GDMA1_TX_GBCNT + 0x40)
+
+/* phy device flags */
+#define FE_PHY_FLAG_PORT BIT(0)
+#define FE_PHY_FLAG_ATTACH BIT(1)
+
+struct fe_tx_dma {
+ unsigned int txd1;
+ unsigned int txd2;
+ unsigned int txd3;
+ unsigned int txd4;
+} __packed __aligned(4);
+
+struct fe_priv;
+
+struct fe_phy {
+ /* make sure that phy operations are atomic */
+ spinlock_t lock;
+
+ struct phy_device *phy[8];
+ struct device_node *phy_node[8];
+ const __be32 *phy_fixed[8];
+ int duplex[8];
+ int speed[8];
+ int tx_fc[8];
+ int rx_fc[8];
+ int (*connect)(struct fe_priv *priv);
+ void (*disconnect)(struct fe_priv *priv);
+ void (*start)(struct fe_priv *priv);
+ void (*stop)(struct fe_priv *priv);
+};
+
+struct fe_soc_data {
+ const u16 *reg_table;
+
+ void (*init_data)(struct fe_soc_data *data, struct net_device *netdev);
+ void (*reset_fe)(void);
+ void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
+ int (*fwd_config)(struct fe_priv *priv);
+ void (*tx_dma)(struct fe_tx_dma *txd);
+ int (*switch_init)(struct fe_priv *priv);
+ int (*switch_config)(struct fe_priv *priv);
+ void (*port_init)(struct fe_priv *priv, struct device_node *port);
+ int (*has_carrier)(struct fe_priv *priv);
+ int (*mdio_init)(struct fe_priv *priv);
+ void (*mdio_cleanup)(struct fe_priv *priv);
+ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg,
+ u16 val);
+ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
+ void (*mdio_adjust_link)(struct fe_priv *priv, int port);
+
+ void *swpriv;
+ u32 pdma_glo_cfg;
+ u32 rx_int;
+ u32 tx_int;
+ u32 status_int;
+ u32 checksum_bit;
+};
+
+#define FE_FLAG_PADDING_64B BIT(0)
+#define FE_FLAG_PADDING_BUG BIT(1)
+#define FE_FLAG_JUMBO_FRAME BIT(2)
+#define FE_FLAG_RX_2B_OFFSET BIT(3)
+#define FE_FLAG_RX_SG_DMA BIT(4)
+#define FE_FLAG_RX_VLAN_CTAG BIT(5)
+#define FE_FLAG_NAPI_WEIGHT BIT(6)
+#define FE_FLAG_CALIBRATE_CLK BIT(7)
+#define FE_FLAG_HAS_SWITCH BIT(8)
+
+#define FE_STAT_REG_DECLARE \
+ _FE(tx_bytes) \
+ _FE(tx_packets) \
+ _FE(tx_skip) \
+ _FE(tx_collisions) \
+ _FE(rx_bytes) \
+ _FE(rx_packets) \
+ _FE(rx_overflow) \
+ _FE(rx_fcs_errors) \
+ _FE(rx_short_errors) \
+ _FE(rx_long_errors) \
+ _FE(rx_checksum_errors) \
+ _FE(rx_flow_control_packets)
+
+struct fe_hw_stats {
+ /* make sure that stats operations are atomic */
+ spinlock_t stats_lock;
+
+ struct u64_stats_sync syncp;
+#define _FE(x) u64 x;
+ FE_STAT_REG_DECLARE
+#undef _FE
+};
+
+enum fe_tx_flags {
+ FE_TX_FLAGS_SINGLE0 = 0x01,
+ FE_TX_FLAGS_PAGE0 = 0x02,
+ FE_TX_FLAGS_PAGE1 = 0x04,
+};
+
+struct fe_tx_buf {
+ struct sk_buff *skb;
+ u32 flags;
+ DEFINE_DMA_UNMAP_ADDR(dma_addr0);
+ DEFINE_DMA_UNMAP_LEN(dma_len0);
+ DEFINE_DMA_UNMAP_ADDR(dma_addr1);
+ DEFINE_DMA_UNMAP_LEN(dma_len1);
+};
+
+struct fe_tx_ring {
+ struct fe_tx_dma *tx_dma;
+ struct fe_tx_buf *tx_buf;
+ dma_addr_t tx_phys;
+ u16 tx_ring_size;
+ u16 tx_free_idx;
+ u16 tx_next_idx;
+ u16 tx_thresh;
+};
+
+struct fe_rx_ring {
+ struct fe_rx_dma *rx_dma;
+ u8 **rx_data;
+ dma_addr_t rx_phys;
+ u16 rx_ring_size;
+ u16 frag_size;
+ u16 rx_buf_size;
+ u16 rx_calc_idx;
+};
+
+struct fe_priv {
+ /* make sure that register operations are atomic */
+ spinlock_t page_lock;
+
+ struct fe_soc_data *soc;
+ struct net_device *netdev;
+ struct device_node *switch_np;
+ u32 msg_enable;
+ u32 flags;
+
+ struct device *device;
+ unsigned long sysclk;
+
+ struct fe_rx_ring rx_ring;
+ struct napi_struct rx_napi;
+
+ struct fe_tx_ring tx_ring;
+
+ struct fe_phy *phy;
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ u32 phy_flags;
+
+ int link[8];
+
+ struct fe_hw_stats *hw_stats;
+ unsigned long vlan_map;
+ struct work_struct pending_work;
+ DECLARE_BITMAP(pending_flags, FE_FLAG_MAX);
+};
+
+extern const struct of_device_id of_fe_match[];
+
+void fe_w32(u32 val, unsigned reg);
+u32 fe_r32(unsigned reg);
+
+int fe_set_clock_cycle(struct fe_priv *priv);
+void fe_csum_config(struct fe_priv *priv);
+void fe_stats_update(struct fe_priv *priv);
+void fe_fwd_config(struct fe_priv *priv);
+void fe_reg_w32(u32 val, enum fe_reg reg);
+u32 fe_reg_r32(enum fe_reg reg);
+
+void fe_reset(u32 reset_bits);
+
+static inline void *priv_netdev(struct fe_priv *priv)
+{
+ return (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+}
+
+#endif /* FE_ETH_H */
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7620.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7620.c
new file mode 100644
index 0000000..40bbec4
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7620.c
@@ -0,0 +1,335 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+#include <linux/of_net.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include <mt7620.h>
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+#include "mt7530.h"
+#include "mdio.h"
+
+#define MT7620A_CDMA_CSG_CFG 0x400
+#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
+#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
+#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
+#define MT7620A_RESET_FE BIT(21)
+#define MT7621_RESET_FE BIT(6)
+#define MT7620A_RESET_ESW BIT(23)
+#define MT7620_L4_VALID BIT(23)
+#define MT7621_L4_VALID BIT(24)
+
+#define MT7620_TX_DMA_UDF BIT(15)
+#define MT7621_TX_DMA_UDF BIT(19)
+#define TX_DMA_FP_BMAP ((0xff) << 19)
+
+#define CDMA_ICS_EN BIT(2)
+#define CDMA_UCS_EN BIT(1)
+#define CDMA_TCS_EN BIT(0)
+
+#define GDMA_ICS_EN BIT(22)
+#define GDMA_TCS_EN BIT(21)
+#define GDMA_UCS_EN BIT(20)
+
+/* frame engine counters */
+#define MT7620_REG_MIB_OFFSET 0x1000
+#define MT7620_PPE_AC_BCNT0 (MT7620_REG_MIB_OFFSET + 0x00)
+#define MT7620_GDM1_TX_GBCNT (MT7620_REG_MIB_OFFSET + 0x300)
+#define MT7620_GDM2_TX_GBCNT (MT7620_GDM1_TX_GBCNT + 0x40)
+
+#define MT7621_REG_MIB_OFFSET 0x2000
+#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
+#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
+#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
+
+#define GSW_REG_GDMA1_MAC_ADRL 0x508
+#define GSW_REG_GDMA1_MAC_ADRH 0x50C
+
+#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
+#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
+
+/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
+ * but after test it should be BIT(13).
+ */
+#define MT7620_FE_GDM1_AF BIT(13)
+#define MT7621_FE_GDM1_AF BIT(28)
+#define MT7621_FE_GDM2_AF BIT(29)
+
+static const u16 mt7620_reg_table[FE_REG_COUNT] = {
+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
+ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
+ [FE_REG_FE_COUNTER_BASE] = MT7620_GDM1_TX_GBCNT,
+ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
+ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
+};
+
+static int mt7620_gsw_config(struct fe_priv *priv)
+{
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
+
+ /* is the mt7530 internal or external */
+ if (priv->mii_bus && mdiobus_get_phy(priv->mii_bus, 0x1f)) {
+ mt7530_probe(priv->device, gsw->base, NULL, 0);
+ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
+ } else {
+ mt7530_probe(priv->device, gsw->base, NULL, 1);
+ }
+
+ return 0;
+}
+
+static void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
+{
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+ mtk_switch_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
+ mtk_switch_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
+ GSW_REG_SMACCR0);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+}
+
+static void mt7620_auto_poll(struct mt7620_gsw *gsw)
+{
+ int phy;
+ int lsb = -1, msb = 0;
+
+ for_each_set_bit(phy, &gsw->autopoll, 32) {
+ if (lsb < 0)
+ lsb = phy;
+ msb = phy;
+ }
+
+ if (lsb == msb)
+ lsb--;
+
+ mtk_switch_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) |
+ (msb << 8) | lsb, ESW_PHY_POLLING);
+}
+
+static void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
+{
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ const __be32 *_id = of_get_property(np, "reg", NULL);
+ int phy_mode, size, id;
+ int shift = 12;
+ u32 val, mask = 0;
+ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
+
+ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
+ if (_id)
+ pr_err("%s: invalid port id %d\n", np->name,
+ be32_to_cpu(*_id));
+ else
+ pr_err("%s: invalid port id\n", np->name);
+ return;
+ }
+
+ id = be32_to_cpu(*_id);
+
+ if (id == 4)
+ shift = 14;
+
+ priv->phy->phy_fixed[id] = of_get_property(np, "mediatek,fixed-link",
+ &size);
+ if (priv->phy->phy_fixed[id] &&
+ (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
+ pr_err("%s: invalid fixed link property\n", np->name);
+ priv->phy->phy_fixed[id] = NULL;
+ return;
+ }
+
+ phy_mode = of_get_phy_mode(np);
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ mask = 0;
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ mask = 1;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ mask = 2;
+ break;
+ default:
+ dev_err(priv->device, "port %d - invalid phy mode\n", id);
+ return;
+ }
+
+ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
+ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
+ return;
+
+ val = rt_sysc_r32(SYSC_REG_CFG1);
+ val &= ~(3 << shift);
+ val |= mask << shift;
+ rt_sysc_w32(val, SYSC_REG_CFG1);
+
+ if (priv->phy->phy_fixed[id]) {
+ const __be32 *link = priv->phy->phy_fixed[id];
+ int tx_fc, rx_fc;
+ u32 val = 0;
+
+ priv->phy->speed[id] = be32_to_cpup(link++);
+ tx_fc = be32_to_cpup(link++);
+ rx_fc = be32_to_cpup(link++);
+ priv->phy->duplex[id] = be32_to_cpup(link++);
+ priv->link[id] = 1;
+
+ switch (priv->phy->speed[id]) {
+ case SPEED_10:
+ val = 0;
+ break;
+ case SPEED_100:
+ val = 1;
+ break;
+ case SPEED_1000:
+ val = 2;
+ break;
+ default:
+ dev_err(priv->device, "invalid link speed: %d\n",
+ priv->phy->speed[id]);
+ priv->phy->phy_fixed[id] = 0;
+ return;
+ }
+ val = PMCR_SPEED(val);
+ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
+ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
+ if (tx_fc)
+ val |= PMCR_TX_FC;
+ if (rx_fc)
+ val |= PMCR_RX_FC;
+ if (priv->phy->duplex[id])
+ val |= PMCR_DUPLEX;
+ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
+ dev_info(priv->device, "using fixed link parameters\n");
+ return;
+ }
+
+ if (priv->phy->phy_node[id] && mdiobus_get_phy(priv->mii_bus, id)) {
+ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
+ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG;
+
+ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
+ fe_connect_phy_node(priv, priv->phy->phy_node[id]);
+ gsw->autopoll |= BIT(id);
+ mt7620_auto_poll(gsw);
+ return;
+ }
+}
+
+static void mt7620_fe_reset(void)
+{
+ fe_reset(MT7620A_RESET_FE | MT7620A_RESET_ESW);
+}
+
+static void mt7620_rxcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
+ GDMA_TCS_EN | GDMA_UCS_EN),
+ MT7620A_GDMA1_FWD_CFG);
+ else
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~(GDMA_ICS_EN |
+ GDMA_TCS_EN | GDMA_UCS_EN),
+ MT7620A_GDMA1_FWD_CFG);
+}
+
+static void mt7620_txcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN |
+ CDMA_UCS_EN | CDMA_TCS_EN),
+ MT7620A_CDMA_CSG_CFG);
+ else
+ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) & ~(CDMA_ICS_EN |
+ CDMA_UCS_EN | CDMA_TCS_EN),
+ MT7620A_CDMA_CSG_CFG);
+}
+
+static int mt7620_fwd_config(struct fe_priv *priv)
+{
+ struct net_device *dev = priv_netdev(priv);
+
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
+
+ mt7620_txcsum_config((dev->features & NETIF_F_IP_CSUM));
+ mt7620_rxcsum_config((dev->features & NETIF_F_RXCSUM));
+
+ return 0;
+}
+
+static void mt7620_tx_dma(struct fe_tx_dma *txd)
+{
+}
+
+static void mt7620_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
+ FE_FLAG_RX_SG_DMA | FE_FLAG_HAS_SWITCH;
+
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX;
+ if (mt7620_get_eco() >= 5)
+ netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_IPV6_CSUM;
+}
+
+static struct fe_soc_data mt7620_data = {
+ .init_data = mt7620_init_data,
+ .reset_fe = mt7620_fe_reset,
+ .set_mac = mt7620_set_mac,
+ .fwd_config = mt7620_fwd_config,
+ .tx_dma = mt7620_tx_dma,
+ .switch_init = mtk_gsw_init,
+ .switch_config = mt7620_gsw_config,
+ .port_init = mt7620_port_init,
+ .reg_table = mt7620_reg_table,
+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
+ .rx_int = RT5350_RX_DONE_INT,
+ .tx_int = RT5350_TX_DONE_INT,
+ .status_int = MT7620_FE_GDM1_AF,
+ .checksum_bit = MT7620_L4_VALID,
+ .has_carrier = mt7620_has_carrier,
+ .mdio_read = mt7620_mdio_read,
+ .mdio_write = mt7620_mdio_write,
+ .mdio_adjust_link = mt7620_mdio_link_adjust,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "mediatek,mt7620-eth", .data = &mt7620_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c
new file mode 100644
index 0000000..b1c84fc
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_mt7621.c
@@ -0,0 +1,185 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+#include <linux/of_net.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+#include "mt7530.h"
+#include "mdio.h"
+
+#define MT7620A_CDMA_CSG_CFG 0x400
+#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
+#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
+#define MT7621_RESET_FE BIT(6)
+#define MT7621_L4_VALID BIT(24)
+
+#define MT7621_TX_DMA_UDF BIT(19)
+#define MT7621_TX_DMA_FPORT BIT(25)
+
+#define CDMA_ICS_EN BIT(2)
+#define CDMA_UCS_EN BIT(1)
+#define CDMA_TCS_EN BIT(0)
+
+#define GDMA_ICS_EN BIT(22)
+#define GDMA_TCS_EN BIT(21)
+#define GDMA_UCS_EN BIT(20)
+
+/* frame engine counters */
+#define MT7621_REG_MIB_OFFSET 0x2000
+#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
+#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
+#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
+
+#define GSW_REG_GDMA1_MAC_ADRL 0x508
+#define GSW_REG_GDMA1_MAC_ADRH 0x50C
+
+#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
+#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
+
+/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
+ * but after test it should be BIT(13).
+ */
+#define MT7620_FE_GDM1_AF BIT(13)
+#define MT7621_FE_GDM1_AF BIT(28)
+#define MT7621_FE_GDM2_AF BIT(29)
+
+static const u16 mt7621_reg_table[FE_REG_COUNT] = {
+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
+ [FE_REG_FE_DMA_VID_BASE] = 0,
+ [FE_REG_FE_COUNTER_BASE] = MT7621_GDM1_TX_GBCNT,
+ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
+ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
+};
+
+static int mt7621_gsw_config(struct fe_priv *priv)
+{
+ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f])
+ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
+
+ return 0;
+}
+
+static void mt7621_fe_reset(void)
+{
+ fe_reset(MT7621_RESET_FE);
+}
+
+static void mt7621_rxcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
+ GDMA_TCS_EN | GDMA_UCS_EN),
+ MT7620A_GDMA1_FWD_CFG);
+ else
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~(GDMA_ICS_EN |
+ GDMA_TCS_EN | GDMA_UCS_EN),
+ MT7620A_GDMA1_FWD_CFG);
+}
+
+static void mt7621_rxvlan_config(bool enable)
+{
+ if (enable)
+ fe_w32(1, MT7621_CDMP_EG_CTRL);
+ else
+ fe_w32(0, MT7621_CDMP_EG_CTRL);
+}
+
+static int mt7621_fwd_config(struct fe_priv *priv)
+{
+ struct net_device *dev = priv_netdev(priv);
+
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~0xffff,
+ MT7620A_GDMA1_FWD_CFG);
+
+ /* mt7621 doesn't have txcsum config */
+ mt7621_rxcsum_config((dev->features & NETIF_F_RXCSUM));
+ mt7621_rxvlan_config(priv->flags & FE_FLAG_RX_VLAN_CTAG);
+
+ return 0;
+}
+
+static void mt7621_tx_dma(struct fe_tx_dma *txd)
+{
+ txd->txd4 = MT7621_TX_DMA_FPORT;
+}
+
+static void mt7621_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
+ FE_FLAG_RX_SG_DMA | FE_FLAG_NAPI_WEIGHT |
+ FE_FLAG_HAS_SWITCH;
+
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_TSO |
+ NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
+}
+
+static void mt7621_set_mac(struct fe_priv *priv, unsigned char *mac)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+ fe_w32((mac[0] << 8) | mac[1], GSW_REG_GDMA1_MAC_ADRH);
+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
+ GSW_REG_GDMA1_MAC_ADRL);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+}
+
+static struct fe_soc_data mt7621_data = {
+ .init_data = mt7621_init_data,
+ .reset_fe = mt7621_fe_reset,
+ .set_mac = mt7621_set_mac,
+ .fwd_config = mt7621_fwd_config,
+ .tx_dma = mt7621_tx_dma,
+ .switch_init = mtk_gsw_init,
+ .switch_config = mt7621_gsw_config,
+ .reg_table = mt7621_reg_table,
+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
+ .rx_int = RT5350_RX_DONE_INT,
+ .tx_int = RT5350_TX_DONE_INT,
+ .status_int = (MT7621_FE_GDM1_AF | MT7621_FE_GDM2_AF),
+ .checksum_bit = MT7621_L4_VALID,
+ .has_carrier = mt7620_has_carrier,
+ .mdio_read = mt7620_mdio_read,
+ .mdio_write = mt7620_mdio_write,
+ .mdio_adjust_link = mt7620_mdio_link_adjust,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt2880.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt2880.c
new file mode 100644
index 0000000..6c89c99
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt2880.c
@@ -0,0 +1,76 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT2880_RESET_FE BIT(18)
+
+static void rt2880_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_TX;
+ /* this should work according to the datasheet but actually does not*/
+ /* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
+}
+
+void rt2880_fe_reset(void)
+{
+ fe_reset(RT2880_RESET_FE);
+}
+
+static int rt2880_fwd_config(struct fe_priv *priv)
+{
+ int ret;
+
+ ret = fe_set_clock_cycle(priv);
+ if (ret)
+ return ret;
+
+ fe_fwd_config(priv);
+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
+ fe_csum_config(priv);
+
+ return ret;
+}
+
+struct fe_soc_data rt2880_data = {
+ .init_data = rt2880_init_data,
+ .reset_fe = rt2880_fe_reset,
+ .fwd_config = rt2880_fwd_config,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .checksum_bit = RX_DMA_L4VALID,
+ .rx_int = FE_RX_DONE_INT,
+ .tx_int = FE_TX_DONE_INT,
+ .status_int = FE_CNT_GDM_AF,
+ .mdio_read = rt2880_mdio_read,
+ .mdio_write = rt2880_mdio_write,
+ .mdio_adjust_link = rt2880_mdio_link_adjust,
+ .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3050.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3050.c
new file mode 100644
index 0000000..914b814
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3050.c
@@ -0,0 +1,158 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT305X_RESET_FE BIT(21)
+#define RT305X_RESET_ESW BIT(23)
+
+static const u16 rt5350_reg_table[FE_REG_COUNT] = {
+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
+ [FE_REG_FE_RST_GL] = 0,
+ [FE_REG_FE_DMA_VID_BASE] = 0,
+};
+
+static void rt305x_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+ FE_FLAG_CALIBRATE_CLK | FE_FLAG_HAS_SWITCH;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
+}
+
+static int rt3050_fwd_config(struct fe_priv *priv)
+{
+ int ret;
+
+ if (ralink_soc != RT305X_SOC_RT3052) {
+ ret = fe_set_clock_cycle(priv);
+ if (ret)
+ return ret;
+ }
+
+ fe_fwd_config(priv);
+ if (ralink_soc != RT305X_SOC_RT3352)
+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
+ fe_csum_config(priv);
+
+ return 0;
+}
+
+static void rt305x_fe_reset(void)
+{
+ fe_reset(RT305X_RESET_FE);
+}
+
+static void rt5350_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_HAS_SWITCH;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
+}
+
+static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
+ RT5350_SDM_MAC_ADRL);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+}
+
+static void rt5350_rxcsum_config(bool enable)
+{
+ if (enable)
+ fe_w32(fe_r32(RT5350_SDM_CFG) | (RT5350_SDM_ICS_EN |
+ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
+ RT5350_SDM_CFG);
+ else
+ fe_w32(fe_r32(RT5350_SDM_CFG) & ~(RT5350_SDM_ICS_EN |
+ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
+ RT5350_SDM_CFG);
+}
+
+static int rt5350_fwd_config(struct fe_priv *priv)
+{
+ struct net_device *dev = priv_netdev(priv);
+
+ rt5350_rxcsum_config((dev->features & NETIF_F_RXCSUM));
+
+ return 0;
+}
+
+static void rt5350_tx_dma(struct fe_tx_dma *txd)
+{
+ txd->txd4 = 0;
+}
+
+static void rt5350_fe_reset(void)
+{
+ fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
+}
+
+static struct fe_soc_data rt3050_data = {
+ .init_data = rt305x_init_data,
+ .reset_fe = rt305x_fe_reset,
+ .fwd_config = rt3050_fwd_config,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .checksum_bit = RX_DMA_L4VALID,
+ .rx_int = FE_RX_DONE_INT,
+ .tx_int = FE_TX_DONE_INT,
+ .status_int = FE_CNT_GDM_AF,
+};
+
+static struct fe_soc_data rt5350_data = {
+ .init_data = rt5350_init_data,
+ .reg_table = rt5350_reg_table,
+ .reset_fe = rt5350_fe_reset,
+ .set_mac = rt5350_set_mac,
+ .fwd_config = rt5350_fwd_config,
+ .tx_dma = rt5350_tx_dma,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .checksum_bit = RX_DMA_L4VALID,
+ .rx_int = RT5350_RX_DONE_INT,
+ .tx_int = RT5350_TX_DONE_INT,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
+ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3883.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3883.c
new file mode 100644
index 0000000..4935b7f
--- /dev/null
+++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/soc_rt3883.c
@@ -0,0 +1,75 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic at openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee at gmail.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT3883_RSTCTRL_FE BIT(21)
+
+static void rt3883_fe_reset(void)
+{
+ fe_reset(RT3883_RSTCTRL_FE);
+}
+
+static int rt3883_fwd_config(struct fe_priv *priv)
+{
+ int ret;
+
+ ret = fe_set_clock_cycle(priv);
+ if (ret)
+ return ret;
+
+ fe_fwd_config(priv);
+ fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
+ fe_csum_config(priv);
+
+ return ret;
+}
+
+static void rt3883_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
+}
+
+static struct fe_soc_data rt3883_data = {
+ .init_data = rt3883_init_data,
+ .reset_fe = rt3883_fe_reset,
+ .fwd_config = rt3883_fwd_config,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .rx_int = FE_RX_DONE_INT,
+ .tx_int = FE_TX_DONE_INT,
+ .status_int = FE_CNT_GDM_AF,
+ .checksum_bit = RX_DMA_L4VALID,
+ .mdio_read = rt2880_mdio_read,
+ .mdio_write = rt2880_mdio_write,
+ .mdio_adjust_link = rt2880_mdio_link_adjust,
+ .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7620/config-4.9
similarity index 67%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/mt7620/config-4.9
index 383370b..508f548 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7620/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +8,48 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_MT7620A_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -64,14 +57,15 @@ CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
+# CONFIG_GPIO_MT7621 is not set
+CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +77,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,89 +92,70 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
+CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_RAW_APPENDED_DTB is not set
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
+# CONFIG_MT7621_WDT is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_MT7620=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_MEDIATEK_GSW_MT7620=y
CONFIG_NET_MEDIATEK_MDIO=y
CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NET_MEDIATEK_MT7620=y
+# CONFIG_NET_MEDIATEK_RT3050 is not set
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -191,79 +164,52 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
+# CONFIG_SG_POOL is not set
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7621/config-4.4
index 383370b..b3c237f 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7621/config-4.4
@@ -46,8 +46,14 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
@@ -100,6 +106,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -116,8 +123,8 @@ CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
@@ -195,6 +202,7 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
+CONFIG_PADATA=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7621/config-4.9
similarity index 90%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/mt7621/config-4.9
index 383370b..eab7a97 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7621/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,14 +8,13 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_BOARD_SCACHE=y
CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
@@ -30,6 +28,7 @@ CONFIG_CMDLINE_BOOL=y
CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
@@ -46,32 +45,39 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_MT7621=y
# CONFIG_GPIO_RALINK is not set
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,7 +89,7 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
@@ -92,7 +98,6 @@ CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,27 +105,29 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
@@ -128,9 +135,13 @@ CONFIG_LIBFDT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MFD_MAX77620 is not set
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
@@ -140,7 +151,6 @@ CONFIG_MIPS_CPS=y
CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
@@ -171,15 +181,8 @@ CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
CONFIG_NR_CPUS=4
@@ -191,13 +194,14 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
+CONFIG_PADATA=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
@@ -212,11 +216,16 @@ CONFIG_RALINK=y
# CONFIG_RALINK_WDT is not set
CONFIG_RATIONAL=y
CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCHED_SMT=y
@@ -225,6 +234,7 @@ CONFIG_SCHED_SMT=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_POOL is not set
CONFIG_SMP=y
CONFIG_SMP_UP=y
# CONFIG_SOC_MT7620 is not set
@@ -238,6 +248,7 @@ CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
CONFIG_SYNC_R4K=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
@@ -266,4 +277,3 @@ CONFIG_WEAK_ORDERING=y
CONFIG_XPS=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/target.mk b/target/linux/ramips/mt7621/target.mk
index 121761f..da80d6e 100644
--- a/target/linux/ramips/mt7621/target.mk
+++ b/target/linux/ramips/mt7621/target.mk
@@ -9,8 +9,6 @@ CPU_TYPE:=24kc
DEFAULT_PACKAGES += kmod-mt76
-KERNEL_PATCHVER:=4.4
-
define Target/Description
Build firmware images for Ralink MT7621 based boards.
endef
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7628/config-4.9
similarity index 69%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/mt7628/config-4.9
index 383370b..6f8e7f1 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7628/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +8,48 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_MT7620A_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -64,14 +57,15 @@ CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_MT7621=y
# CONFIG_GPIO_RALINK is not set
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +77,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,89 +92,65 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
+CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_RAW_APPENDED_DTB is not set
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_MEDIATEK_ESW_RT3050=y
+# CONFIG_NET_MEDIATEK_MT7620 is not set
+CONFIG_NET_MEDIATEK_RT3050=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -191,44 +159,33 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
CONFIG_RALINK=y
# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
+# CONFIG_SG_POOL is not set
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
@@ -238,32 +195,16 @@ CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7688/config-4.9
similarity index 68%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/mt7688/config-4.9
index 383370b..9234143 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7688/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +8,48 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_MT7620A_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -64,14 +57,15 @@ CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_MT7621=y
# CONFIG_GPIO_RALINK is not set
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +77,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,89 +92,65 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
+CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
+CONFIG_MIPS_FPU_EMULATOR=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_RAW_APPENDED_DTB is not set
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_MEDIATEK_ESW_RT3050=y
+# CONFIG_NET_MEDIATEK_MT7620 is not set
+CONFIG_NET_MEDIATEK_RT3050=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -191,44 +159,36 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_PWM=y
+CONFIG_PWM_MEDIATEK=y
+CONFIG_PWM_SYSFS=y
CONFIG_RALINK=y
# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
+# CONFIG_SG_POOL is not set
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
@@ -238,32 +198,16 @@ CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
new file mode 100644
index 0000000..41a0f63
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -0,0 +1,857 @@
+From fec11d4e8dc5cc79bcd7c8fd55038ac21ac39965 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 16 Mar 2014 05:22:39 +0000
+Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7621.c | 813 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 814 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7621.c
+
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
++obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+ obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7621.c
+@@ -0,0 +1,832 @@
++/**************************************************************************
++ *
++ * BRIEF MODULE DESCRIPTION
++ * PCI init for Ralink RT2880 solution
++ *
++ * Copyright 2007 Ralink Inc. (bruce_chang at ralinktech.com.tw)
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ * May 2007 Bruce Chang
++ * Initial Release
++ *
++ * May 2009 Bruce Chang
++ * support RT2880/RT3883 PCIe
++ *
++ * May 2011 Bruce Chang
++ * support RT6855/MT7620 PCIe
++ *
++ **************************************************************************
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/version.h>
++#include <asm/pci.h>
++#include <asm/io.h>
++#include <asm/mips-cm.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/of.h>
++#include <linux/of_pci.h>
++#include <linux/platform_device.h>
++
++#include <ralink_regs.h>
++
++extern void pcie_phy_init(void);
++extern void chk_phy_pll(void);
++
++/*
++ * These functions and structures provide the BIOS scan and mapping of the PCI
++ * devices.
++ */
++
++#define CONFIG_PCIE_PORT0
++#define CONFIG_PCIE_PORT1
++#define CONFIG_PCIE_PORT2
++#define RALINK_PCIE0_CLK_EN (1<<24)
++#define RALINK_PCIE1_CLK_EN (1<<25)
++#define RALINK_PCIE2_CLK_EN (1<<26)
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
++#define SURFBOARDINT_PCIE0 11 /* PCIE0 */
++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
++#define SURFBOARDINT_PCIE1 31 /* PCIE1 */
++#define SURFBOARDINT_PCIE2 32 /* PCIE2 */
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCIE0_RST (1<<24)
++#define RALINK_PCIE1_RST (1<<25)
++#define RALINK_PCIE2_RST (1<<26)
++#define RALINK_SYSCTL_BASE 0xBE000000
++
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_BASE 0xBE140000
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RT6855_PCIE0_OFFSET 0x2000
++#define RT6855_PCIE1_OFFSET 0x3000
++#define RT6855_PCIE2_OFFSET 0x4000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
++
++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
++
++
++#define MV_WRITE(ofs, data) \
++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
++#define MV_READ(ofs, data) \
++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++#define MV_READ_DATA(ofs) \
++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_16(ofs, data) \
++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
++#define MV_READ_16(ofs, data) \
++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_8(ofs, data) \
++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
++#define MV_READ_8(ofs, data) \
++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
++
++
++
++#define RALINK_PCI_MM_MAP_BASE 0x60000000
++#define RALINK_PCI_IO_MAP_BASE 0x1e160000
++
++#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
++#define GPIO_PERST
++#define ASSERT_SYSRST_PCIE(val) do { \
++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
++ RALINK_RSTCTRL |= val; \
++ else \
++ RALINK_RSTCTRL &= ~val; \
++ } while(0)
++#define DEASSERT_SYSRST_PCIE(val) do { \
++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
++ RALINK_RSTCTRL &= ~val; \
++ else \
++ RALINK_RSTCTRL |= val; \
++ } while(0)
++#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
++#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
++#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
++#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
++#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
++#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
++#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
++#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
++//RALINK_SYSCFG1 bit
++#define RALINK_PCI_HOST_MODE_EN (1<<7)
++#define RALINK_PCIE_RC_MODE_EN (1<<8)
++//RALINK_RSTCTRL bit
++#define RALINK_PCIE_RST (1<<23)
++#define RALINK_PCI_RST (1<<24)
++//RALINK_CLKCFG1 bit
++#define RALINK_PCI_CLK_EN (1<<19)
++#define RALINK_PCIE_CLK_EN (1<<21)
++//RALINK_GPIOMODE bit
++#define PCI_SLOTx2 (1<<11)
++#define PCI_SLOTx1 (2<<11)
++//MTK PCIE PLL bit
++#define PDRV_SW_SET (1<<31)
++#define LC_CKDRVPD_ (1<<19)
++
++#define MEMORY_BASE 0x0
++static int pcie_link_status = 0;
++
++#define PCI_ACCESS_READ_1 0
++#define PCI_ACCESS_READ_2 1
++#define PCI_ACCESS_READ_4 2
++#define PCI_ACCESS_WRITE_1 3
++#define PCI_ACCESS_WRITE_2 4
++#define PCI_ACCESS_WRITE_4 5
++
++static int config_access(unsigned char access_type, struct pci_bus *bus,
++ unsigned int devfn, unsigned int where, u32 * data)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ uint32_t address_reg, data_reg;
++ unsigned int address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++
++ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ MV_WRITE(address_reg, address);
++
++ switch(access_type) {
++ case PCI_ACCESS_WRITE_1:
++ MV_WRITE_8(data_reg+(where&0x3), *data);
++ break;
++ case PCI_ACCESS_WRITE_2:
++ MV_WRITE_16(data_reg+(where&0x3), *data);
++ break;
++ case PCI_ACCESS_WRITE_4:
++ MV_WRITE(data_reg, *data);
++ break;
++ case PCI_ACCESS_READ_1:
++ MV_READ_8( data_reg+(where&0x3), data);
++ break;
++ case PCI_ACCESS_READ_2:
++ MV_READ_16(data_reg+(where&0x3), data);
++ break;
++ case PCI_ACCESS_READ_4:
++ MV_READ(data_reg, data);
++ break;
++ default:
++ printk("no specify access type\n");
++ break;
++ }
++ return 0;
++}
++
++static int
++read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
++{
++ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
++{
++ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
++{
++ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++
++static int
++pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++ switch (size) {
++ case 1:
++ return read_config_byte(bus, devfn, where, (u8 *) val);
++ case 2:
++ return read_config_word(bus, devfn, where, (u16 *) val);
++ default:
++ return read_config_dword(bus, devfn, where, val);
++ }
++}
++
++static int
++pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++ switch (size) {
++ case 1:
++ return write_config_byte(bus, devfn, where, (u8) val);
++ case 2:
++ return write_config_word(bus, devfn, where, (u16) val);
++ default:
++ return write_config_dword(bus, devfn, where, val);
++ }
++}
++
++struct pci_ops mt7621_pci_ops= {
++ .read = pci_config_read,
++ .write = pci_config_write,
++};
++
++static struct resource mt7621_res_pci_mem1 = {
++ .name = "PCI MEM1",
++ .start = RALINK_PCI_MM_MAP_BASE,
++ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++ .flags = IORESOURCE_MEM,
++};
++static struct resource mt7621_res_pci_io1 = {
++ .name = "PCI I/O1",
++ .start = RALINK_PCI_IO_MAP_BASE,
++ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++ .flags = IORESOURCE_IO,
++};
++
++static struct pci_controller mt7621_controller = {
++ .pci_ops = &mt7621_pci_ops,
++ .mem_resource = &mt7621_res_pci_mem1,
++ .io_resource = &mt7621_res_pci_io1,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++ .io_map_base = 0xa0000000,
++};
++
++static void
++read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
++{
++ unsigned int address_reg, data_reg, address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++ MV_WRITE(address_reg, address);
++ MV_READ(data_reg, val);
++ return;
++}
++
++static void
++write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
++{
++ unsigned int address_reg, data_reg, address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++ MV_WRITE(address_reg, address);
++ MV_WRITE(data_reg, val);
++ return;
++}
++
++
++int __init
++pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ u16 cmd;
++ u32 val;
++ int irq = 0;
++
++ if ((dev->bus->number == 0) && (slot == 0)) {
++ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 0 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if((dev->bus->number == 0) && (slot == 0x1)) {
++ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 1 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if((dev->bus->number == 0) && (slot == 0x2)) {
++ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 2 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
++ switch (pcie_link_status) {
++ case 2:
++ case 6:
++ irq = RALINK_INT_PCIE1;
++ break;
++ case 4:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE0;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
++ switch (pcie_link_status) {
++ case 5:
++ case 6:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE1;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
++ switch (pcie_link_status) {
++ case 5:
++ case 6:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE1;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else {
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ return 0;
++ }
++
++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
++ return irq;
++}
++
++void
++set_pcie_phy(u32 *addr, int start_b, int bits, int val)
++{
++// printk("0x%p:", addr);
++// printk(" %x", *addr);
++ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
++ *(unsigned int *)(addr) |= val << start_b;
++// printk(" -> %x\n", *addr);
++}
++
++void
++bypass_pipe_rst(void)
++{
++#if defined (CONFIG_PCIE_PORT0)
++ /* PCIe Port 0 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ /* PCIe Port 1 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ /* PCIe Port 2 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++}
++
++void
++set_phy_for_ssc(void)
++{
++ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
++
++ reg = (reg >> 6) & 0x7;
++#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
++ /* Set PCIe Port0 & Port1 PHY to disable SSC */
++ /* Debug Xtal Type */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ printk("***** Xtal 40MHz *****\n");
++ } else { // 25MHz | 20MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ if (reg >= 6) {
++ printk("***** Xtal 25MHz *****\n");
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
++ } else {
++ printk("***** Xtal 20MHz *****\n");
++ }
++ }
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
++ }
++ /* Enable PHY and disable force mode */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ /* Set PCIe Port2 PHY to disable SSC */
++ /* Debug Xtal Type */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ } else { // 25MHz | 20MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ if (reg >= 6) { // 25MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
++ }
++ }
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
++ }
++ /* Enable PHY and disable force mode */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
++#endif
++}
++
++void setup_cm_memory_region(struct resource *mem_resource)
++{
++ resource_size_t mask;
++ if (mips_cm_numiocu()) {
++ /* FIXME: hardware doesn't accept mask values with 1s after
++ 0s (e.g. 0xffef), so it would be great to warn if that's
++ about to happen */
++ mask = ~(mem_resource->end - mem_resource->start);
++
++ write_gcr_reg1_base(mem_resource->start);
++ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
++ printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n",
++ read_gcr_reg1_base(),
++ read_gcr_reg1_mask());
++ }
++}
++
++static int mt7621_pci_probe(struct platform_device *pdev)
++{
++ unsigned long val = 0;
++
++ iomem_resource.start = 0;
++ iomem_resource.end= ~0;
++ ioport_resource.start= 0;
++ ioport_resource.end = ~0;
++
++#if defined (CONFIG_PCIE_PORT0)
++ val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ val |= RALINK_PCIE2_RST;
++#endif
++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
++ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
++ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
++ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
++ mdelay(100);
++ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
++ mdelay(100);
++ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
++
++ mdelay(100);
++#else
++ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
++#endif
++#if defined (CONFIG_PCIE_PORT0)
++ val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ val |= RALINK_PCIE2_RST;
++#endif
++ DEASSERT_SYSRST_PCIE(val);
++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++
++ if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
++ bypass_pipe_rst();
++ set_phy_for_ssc();
++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++
++#if defined (CONFIG_PCIE_PORT0)
++ read_config(0, 0, 0, 0x70c, &val);
++ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ read_config(0, 1, 0, 0x70c, &val);
++ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ read_config(0, 2, 0, 0x70c, &val);
++ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
++#endif
++
++ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
++ RALINK_SYSCFG1 &= ~(0x30);
++ RALINK_SYSCFG1 |= (2<<4);
++ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
++ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
++ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
++ RALINK_PCIE_CLK_GEN |= 0x80000000;
++ mdelay(50);
++ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
++
++
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
++ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
++ mdelay(100);
++#else
++ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
++#endif
++ mdelay(500);
++
++
++ mdelay(500);
++#if defined (CONFIG_PCIE_PORT0)
++ if(( RALINK_PCI0_STATUS & 0x1) == 0)
++ {
++ printk("PCIE0 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
++ pcie_link_status &= ~(1<<0);
++ } else {
++ pcie_link_status |= 1<<0;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ if(( RALINK_PCI1_STATUS & 0x1) == 0)
++ {
++ printk("PCIE1 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
++ pcie_link_status &= ~(1<<1);
++ } else {
++ pcie_link_status |= 1<<1;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
++ printk("PCIE2 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
++ pcie_link_status &= ~(1<<2);
++ } else {
++ pcie_link_status |= 1<<2;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
++ }
++#endif
++ if (pcie_link_status == 0)
++ return 0;
++
++/*
++pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
++3'b000 x x x
++3'b001 x x 0
++3'b010 x 0 x
++3'b011 x 1 0
++3'b100 0 x x
++3'b101 1 x 0
++3'b110 1 0 x
++3'b111 2 1 0
++*/
++ switch(pcie_link_status) {
++ case 2:
++ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
++ break;
++ case 4:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
++ break;
++ case 5:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
++ break;
++ case 6:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
++ break;
++ }
++ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
++ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
++
++/*
++ ioport_resource.start = mt7621_res_pci_io1.start;
++ ioport_resource.end = mt7621_res_pci_io1.end;
++*/
++
++ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
++ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
++
++#if defined (CONFIG_PCIE_PORT0)
++ //PCIe0
++ if((pcie_link_status & 0x1) != 0) {
++ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI0_CLASS = 0x06040001;
++ printk("PCIE0 enabled\n");
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ //PCIe1
++ if ((pcie_link_status & 0x2) != 0) {
++ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI1_CLASS = 0x06040001;
++ printk("PCIE1 enabled\n");
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ //PCIe2
++ if ((pcie_link_status & 0x4) != 0) {
++ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI2_CLASS = 0x06040001;
++ printk("PCIE2 enabled\n");
++ }
++#endif
++
++
++ switch(pcie_link_status) {
++ case 7:
++ read_config(0, 2, 0, 0x4, &val);
++ write_config(0, 2, 0, 0x4, val|0x4);
++ // write_config(0, 1, 0, 0x4, val|0x7);
++ read_config(0, 2, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 2, 0, 0x70c, val);
++ case 3:
++ case 5:
++ case 6:
++ read_config(0, 1, 0, 0x4, &val);
++ write_config(0, 1, 0, 0x4, val|0x4);
++ // write_config(0, 1, 0, 0x4, val|0x7);
++ read_config(0, 1, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 1, 0, 0x70c, val);
++ default:
++ read_config(0, 0, 0, 0x4, &val);
++ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
++ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
++ read_config(0, 0, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 0, 0, 0x70c, val);
++ }
++
++ pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node);
++ setup_cm_memory_region(mt7621_controller.mem_resource);
++ register_pci_controller(&mt7621_controller);
++ return 0;
++
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static const struct of_device_id mt7621_pci_ids[] = {
++ { .compatible = "mediatek,mt7621-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
++
++static struct platform_driver mt7621_pci_driver = {
++ .probe = mt7621_pci_probe,
++ .driver = {
++ .name = "mt7621-pci",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(mt7621_pci_ids),
++ },
++};
++
++static int __init mt7621_pci_init(void)
++{
++ return platform_driver_register(&mt7621_pci_driver);
++}
++
++arch_initcall(mt7621_pci_init);
diff --git a/target/linux/ramips/patches-4.9/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-4.9/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
new file mode 100644
index 0000000..cfe84ba
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -0,0 +1,81 @@
+From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 14 Jul 2013 23:08:11 +0200
+Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -1,11 +1,16 @@
+ if RALINK
+
++config CEVT_SYSTICK_QUIRK
++ bool
++ default n
++
+ config CLKEVT_RT3352
+ bool
+ depends on SOC_RT305X || SOC_MT7620
+ default y
+ select CLKSRC_OF
+ select CLKSRC_MMIO
++ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+ bool
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,26 @@
+ #include <asm/time.h>
+ #include <asm/cevt-r4k.h>
+
++static int mips_state_oneshot(struct clock_event_device *evt)
++{
++ if (!cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 1;
++ setup_irq(evt->irq, &c0_compare_irqaction);
++ }
++
++ return 0;
++}
++
++static int mips_state_shutdown(struct clock_event_device *evt)
++{
++ if (cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 0;
++ remove_irq(evt->irq, &c0_compare_irqaction);
++ }
++
++ return 0;
++}
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -281,17 +301,21 @@ int r4k_clockevent_init(void)
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of(cpu);
++ cd->set_state_shutdown = mips_state_shutdown;
++ cd->set_state_oneshot = mips_state_oneshot;
+ cd->set_next_event = mips_next_event;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
+
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
++#endif
+
+ return 0;
+ }
diff --git a/target/linux/ramips/patches-4.9/0006-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-4.9/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
new file mode 100644
index 0000000..8c144b1
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
@@ -0,0 +1,198 @@
+From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 16:26:41 +0200
+Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
+
+This feature will break udelay() and cause the delay loop to have longer delays
+when the frequency is scaled causing a performance hit.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+--- a/arch/mips/ralink/cevt-rt3352.c
++++ b/arch/mips/ralink/cevt-rt3352.c
+@@ -29,6 +29,10 @@
+ /* enable the counter */
+ #define CFG_CNT_EN 0x1
+
++/* mt7620 frequency scaling defines */
++#define CLK_LUT_CFG 0x40
++#define SLEEP_EN BIT(31)
++
+ struct systick_device {
+ void __iomem *membase;
+ struct clock_event_device dev;
+@@ -36,21 +40,53 @@ struct systick_device {
+ int freq_scale;
+ };
+
++static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
++
+ static int systick_set_oneshot(struct clock_event_device *evt);
+ static int systick_shutdown(struct clock_event_device *evt);
+
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++ if (sdev->freq_scale == status)
++ return;
++
++ sdev->freq_scale = status;
++
++ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
++ (status) ? ("enable") : ("disable"));
++ if (status)
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++ else
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++
++static inline unsigned int read_count(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COUNT);
++}
++
++static inline unsigned int read_compare(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COMPARE);
++}
++
++static inline void write_compare(struct systick_device *sdev, unsigned int val)
++{
++ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
++}
++
+ static int systick_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+ struct systick_device *sdev;
+- u32 count;
++ int res;
+
+ sdev = container_of(evt, struct systick_device, dev);
+- count = ioread32(sdev->membase + SYSTICK_COUNT);
+- count = (count + delta) % SYSTICK_FREQ;
+- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
++ delta += read_count(sdev);
++ write_compare(sdev, delta);
++ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
+
+- return 0;
++ return res;
+ }
+
+ static void systick_event_handler(struct clock_event_device *dev)
+@@ -60,20 +96,25 @@ static void systick_event_handler(struct
+
+ static irqreturn_t systick_interrupt(int irq, void *dev_id)
+ {
+- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
++ int ret = 0;
++ struct clock_event_device *cdev;
++ struct systick_device *sdev;
+
+- dev->event_handler(dev);
++ if (read_c0_cause() & STATUSF_IP7) {
++ cdev = (struct clock_event_device *) dev_id;
++ sdev = container_of(cdev, struct systick_device, dev);
++
++ /* Clear Count/Compare Interrupt */
++ write_compare(sdev, read_compare(sdev));
++ cdev->event_handler(cdev);
++ ret = 1;
++ }
+
+- return IRQ_HANDLED;
++ return IRQ_RETVAL(ret);
+ }
+
+ static struct systick_device systick = {
+ .dev = {
+- /*
+- * cevt-r4k uses 300, make sure systick
+- * gets used if available
+- */
+- .rating = 310,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = systick_next_event,
+ .set_state_shutdown = systick_shutdown,
+@@ -95,9 +136,15 @@ static int systick_shutdown(struct clock
+ sdev = container_of(evt, struct systick_device, dev);
+
+ if (sdev->irq_requested)
+- free_irq(systick.dev.irq, &systick_irqaction);
++ remove_irq(systick.dev.irq, &systick_irqaction);
+ sdev->irq_requested = 0;
+- iowrite32(0, systick.membase + SYSTICK_CONFIG);
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 0);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 1);
+
+ return 0;
+ }
+@@ -117,32 +164,48 @@ static int systick_set_oneshot(struct cl
+ return 0;
+ }
+
++static const struct of_device_id systick_match[] = {
++ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
++ {},
++};
++
+ static int __init ralink_systick_init(struct device_node *np)
+ {
++ const struct of_device_id *match;
++ int rating = 200;
+ int ret;
+
+ systick.membase = of_iomap(np, 0);
+ if (!systick.membase)
+ return -ENXIO;
+
+- systick_irqaction.name = np->name;
+- systick.dev.name = np->name;
+- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
++ match = of_match_node(systick_match, np);
++ if (match) {
++ systick_freq_scaling = match->data;
++ /*
++ * cevt-r4k uses 300, make sure systick
++ * gets used if available
++ */
++ rating = 310;
++ }
++
++ /* enable counter than register clock source */
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
++ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
++
++ /* register clock event */
+ systick.dev.irq = irq_of_parse_and_map(np, 0);
+ if (!systick.dev.irq) {
+ pr_err("%s: request_irq failed", np->name);
+ return -EINVAL;
+ }
+
+- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+- SYSTICK_FREQ, 301, 16,
+- clocksource_mmio_readl_up);
+- if (ret)
+- return ret;
+-
+- clockevents_register_device(&systick.dev);
++ systick_irqaction.name = np->name;
++ systick.dev.name = np->name;
++ systick.dev.rating = rating;
++ systick.dev.cpumask = cpumask_of(0);
++ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
+
+ pr_info("%s: running - mult: %d, shift: %d\n",
+ np->name, systick.dev.mult, systick.dev.shift);
diff --git a/target/linux/ramips/patches-4.9/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-4.9/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
new file mode 100644
index 0000000..4035a14
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
@@ -0,0 +1,21 @@
+From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 4 Aug 2014 18:46:02 +0200
+Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -74,6 +74,8 @@ void __init plat_mem_setup(void)
+ */
+ __dt_setup_arch(__dtb_start);
+
++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
++
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/target/linux/ramips/patches-4.9/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.9/0013-owrt-hack-fix-mt7688-cache-issue.patch
new file mode 100644
index 0000000..8602801
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0013-owrt-hack-fix-mt7688-cache-issue.patch
@@ -0,0 +1,28 @@
+From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 7 Dec 2015 17:15:32 +0100
+Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/kernel/setup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -774,7 +774,6 @@ static void __init arch_mem_init(char **
+ crashk_res.end - crashk_res.start + 1,
+ BOOTMEM_DEFAULT);
+ #endif
+- device_tree_init();
+ sparse_init();
+ plat_swiotlb_setup();
+
+@@ -890,6 +889,7 @@ void __init setup_arch(char **cmdline_p)
+
+ cpu_cache_init();
+ paging_init();
++ device_tree_init();
+ }
+
+ unsigned long kernelsp[NR_CPUS];
diff --git a/target/linux/ramips/patches-4.9/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-4.9/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
new file mode 100644
index 0000000..6f5a6f4
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
@@ -0,0 +1,25 @@
+From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 7 Dec 2015 17:18:05 +0100
+Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
+ default
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -13,9 +13,9 @@ config CLKEVT_RT3352
+ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+- bool
++ bool "illegal access irq"
+ depends on SOC_RT305X
+- default y
++ default n
+
+ config IRQ_INTC
+ bool
diff --git a/target/linux/ramips/patches-4.9/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-4.9/0024-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 0000000..3434864
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0024-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,166 @@
+From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 24/53] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib-sysfs.c | 10 +++++-
+ include/asm-generic/gpio.h | 6 ++++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ #include "gpiolib.h"
+
+@@ -538,3 +540,69 @@ void of_gpiochip_remove(struct gpio_chip
+ gpiochip_remove_pin_ranges(chip);
+ of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++};
++
++static int __init of_gpio_export_init(void)
++{
++ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -544,7 +544,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
+@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc,
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -627,6 +629,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
diff --git a/target/linux/ramips/patches-4.9/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.9/0025-pinctrl-ralink-add-pinctrl-driver.patch
new file mode 100644
index 0000000..6e0d643
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0025-pinctrl-ralink-add-pinctrl-driver.patch
@@ -0,0 +1,524 @@
+From 7adbe9a88c33c6e362a10b109d963b5500a21f00 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:34:05 +0100
+Subject: [PATCH 25/53] pinctrl: ralink: add pinctrl driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/Kconfig | 2 +
+ drivers/pinctrl/Kconfig | 5 +
+ drivers/pinctrl/Makefile | 1 +
+ drivers/pinctrl/pinctrl-rt2880.c | 474 ++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 482 insertions(+)
+ create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -617,6 +617,8 @@ config RALINK
+ select CLKDEV_LOOKUP
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
++ select PINCTRL
++ select PINCTRL_RT2880
+
+ config SGI_IP22
+ bool "SGI IP22 (Indy/Indigo2)"
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -114,6 +114,11 @@ config PINCTRL_LPC18XX
+ help
+ Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
+
++config PINCTRL_RT2880
++ bool
++ depends on RALINK
++ select PINMUX
++
+ config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-
+ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
+ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
+ obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
+ obj-$(CONFIG_PINCTRL_SIRF) += sirf/
+ obj-$(CONFIG_ARCH_TEGRA) += tegra/
+--- /dev/null
++++ b/drivers/pinctrl/pinctrl-rt2880.c
+@@ -0,0 +1,472 @@
++/*
++ * linux/drivers/pinctrl/pinctrl-rt2880.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/io.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/of.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/pinctrl/machine.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/pinmux.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "core.h"
++
++#define SYSC_REG_GPIO_MODE 0x60
++#define SYSC_REG_GPIO_MODE2 0x64
++
++struct rt2880_priv {
++ struct device *dev;
++
++ struct pinctrl_pin_desc *pads;
++ struct pinctrl_desc *desc;
++
++ struct rt2880_pmx_func **func;
++ int func_count;
++
++ struct rt2880_pmx_group *groups;
++ const char **group_names;
++ int group_count;
++
++ uint8_t *gpio;
++ int max_pins;
++};
++
++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->group_count;
++}
++
++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return NULL;
++
++ return p->group_names[group];
++}
++
++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
++ unsigned group,
++ const unsigned **pins,
++ unsigned *num_pins)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return -EINVAL;
++
++ *pins = p->groups[group].func[0].pins;
++ *num_pins = p->groups[group].func[0].pin_count;
++
++ return 0;
++}
++
++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
++ struct pinctrl_map *map, unsigned num_maps)
++{
++ int i;
++
++ for (i = 0; i < num_maps; i++)
++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
++ kfree(map[i].data.configs.configs);
++ kfree(map);
++}
++
++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
++ struct seq_file *s,
++ unsigned offset)
++{
++ seq_printf(s, "ralink pio");
++}
++
++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np,
++ struct pinctrl_map **map)
++{
++ const char *function;
++ int func = of_property_read_string(np, "ralink,function", &function);
++ int grps = of_property_count_strings(np, "ralink,group");
++ int i;
++
++ if (func || !grps)
++ return;
++
++ for (i = 0; i < grps; i++) {
++ const char *group;
++
++ of_property_read_string_index(np, "ralink,group", i, &group);
++
++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
++ (*map)->name = function;
++ (*map)->data.mux.group = group;
++ (*map)->data.mux.function = function;
++ (*map)++;
++ }
++}
++
++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np_config,
++ struct pinctrl_map **map,
++ unsigned *num_maps)
++{
++ int max_maps = 0;
++ struct pinctrl_map *tmp;
++ struct device_node *np;
++
++ for_each_child_of_node(np_config, np) {
++ int ret = of_property_count_strings(np, "ralink,group");
++
++ if (ret >= 0)
++ max_maps += ret;
++ }
++
++ if (!max_maps)
++ return max_maps;
++
++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
++ if (!*map)
++ return -ENOMEM;
++
++ tmp = *map;
++
++ for_each_child_of_node(np_config, np)
++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
++ *num_maps = max_maps;
++
++ return 0;
++}
++
++static const struct pinctrl_ops rt2880_pctrl_ops = {
++ .get_groups_count = rt2880_get_group_count,
++ .get_group_name = rt2880_get_group_name,
++ .get_group_pins = rt2880_get_group_pins,
++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
++ .dt_free_map = rt2880_pinctrl_dt_free_map,
++};
++
++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func_count;
++}
++
++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
++ unsigned func)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func[func]->name;
++}
++
++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ const char * const **groups,
++ unsigned * const num_groups)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (p->func[func]->group_count == 1)
++ *groups = &p->group_names[p->func[func]->groups[0]];
++ else
++ *groups = p->group_names;
++
++ *num_groups = p->func[func]->group_count;
++
++ return 0;
++}
++
++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++ u32 mode = 0;
++ u32 reg = SYSC_REG_GPIO_MODE;
++ int i;
++ int shift;
++
++ /* dont allow double use */
++ if (p->groups[group].enabled) {
++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
++ return -EBUSY;
++ }
++
++ p->groups[group].enabled = 1;
++ p->func[func]->enabled = 1;
++
++ shift = p->groups[group].shift;
++ if (shift >= 32) {
++ shift -= 32;
++ reg = SYSC_REG_GPIO_MODE2;
++ }
++ mode = rt_sysc_r32(reg);
++ mode &= ~(p->groups[group].mask << shift);
++
++ /* mark the pins as gpio */
++ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
++ p->gpio[p->groups[group].func[0].pins[i]] = 1;
++
++ /* function 0 is gpio and needs special handling */
++ if (func == 0) {
++ mode |= p->groups[group].gpio << shift;
++ } else {
++ for (i = 0; i < p->func[func]->pin_count; i++)
++ p->gpio[p->func[func]->pins[i]] = 0;
++ mode |= p->func[func]->value << shift;
++ }
++ rt_sysc_w32(mode, reg);
++
++ return 0;
++}
++
++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
++ struct pinctrl_gpio_range *range,
++ unsigned pin)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (!p->gpio[pin]) {
++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static const struct pinmux_ops rt2880_pmx_group_ops = {
++ .get_functions_count = rt2880_pmx_func_count,
++ .get_function_name = rt2880_pmx_func_name,
++ .get_function_groups = rt2880_pmx_group_get_groups,
++ .set_mux = rt2880_pmx_group_enable,
++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
++};
++
++static struct pinctrl_desc rt2880_pctrl_desc = {
++ .owner = THIS_MODULE,
++ .name = "rt2880-pinmux",
++ .pctlops = &rt2880_pctrl_ops,
++ .pmxops = &rt2880_pmx_group_ops,
++};
++
++static struct rt2880_pmx_func gpio_func = {
++ .name = "gpio",
++};
++
++static int rt2880_pinmux_index(struct rt2880_priv *p)
++{
++ struct rt2880_pmx_func **f;
++ struct rt2880_pmx_group *mux = p->groups;
++ int i, j, c = 0;
++
++ /* count the mux functions */
++ while (mux->name) {
++ p->group_count++;
++ mux++;
++ }
++
++ /* allocate the group names array needed by the gpio function */
++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
++ if (!p->group_names)
++ return -1;
++
++ for (i = 0; i < p->group_count; i++) {
++ p->group_names[i] = p->groups[i].name;
++ p->func_count += p->groups[i].func_count;
++ }
++
++ /* we have a dummy function[0] for gpio */
++ p->func_count++;
++
++ /* allocate our function and group mapping index buffers */
++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
++ if (!f || !gpio_func.groups)
++ return -1;
++
++ /* add a backpointer to the function so it knows its group */
++ gpio_func.group_count = p->group_count;
++ for (i = 0; i < gpio_func.group_count; i++)
++ gpio_func.groups[i] = i;
++
++ f[c] = &gpio_func;
++ c++;
++
++ /* add remaining functions */
++ for (i = 0; i < p->group_count; i++) {
++ for (j = 0; j < p->groups[i].func_count; j++) {
++ f[c] = &p->groups[i].func[j];
++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
++ f[c]->groups[0] = i;
++ f[c]->group_count = 1;
++ c++;
++ }
++ }
++ return 0;
++}
++
++static int rt2880_pinmux_pins(struct rt2880_priv *p)
++{
++ int i, j;
++
++ /* loop over the functions and initialize the pins array. also work out the highest pin used */
++ for (i = 0; i < p->func_count; i++) {
++ int pin;
++
++ if (!p->func[i]->pin_count)
++ continue;
++
++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->func[i]->pins[j] = p->func[i]->pin_first + j;
++
++ pin = p->func[i]->pin_first + p->func[i]->pin_count;
++ if (pin > p->max_pins)
++ p->max_pins = pin;
++ }
++
++ /* the buffer that tells us which pins are gpio */
++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
++ GFP_KERNEL);
++ /* the pads needed to tell pinctrl about our pins */
++ p->pads = devm_kzalloc(p->dev,
++ sizeof(struct pinctrl_pin_desc) * p->max_pins,
++ GFP_KERNEL);
++ if (!p->pads || !p->gpio ) {
++ dev_err(p->dev, "Failed to allocate gpio data\n");
++ return -ENOMEM;
++ }
++
++ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
++ for (i = 0; i < p->func_count; i++) {
++ if (!p->func[i]->pin_count)
++ continue;
++
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->gpio[p->func[i]->pins[j]] = 0;
++ }
++
++ /* pin 0 is always a gpio */
++ p->gpio[0] = 1;
++
++ /* set the pads */
++ for (i = 0; i < p->max_pins; i++) {
++ /* strlen("ioXY") + 1 = 5 */
++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
++
++ if (!name) {
++ dev_err(p->dev, "Failed to allocate pad name\n");
++ return -ENOMEM;
++ }
++ snprintf(name, 5, "io%d", i);
++ p->pads[i].number = i;
++ p->pads[i].name = name;
++ }
++ p->desc->pins = p->pads;
++ p->desc->npins = p->max_pins;
++
++ return 0;
++}
++
++static int rt2880_pinmux_probe(struct platform_device *pdev)
++{
++ struct rt2880_priv *p;
++ struct pinctrl_dev *dev;
++ struct device_node *np;
++
++ if (!rt2880_pinmux_data)
++ return -ENOSYS;
++
++ /* setup the private data */
++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ p->dev = &pdev->dev;
++ p->desc = &rt2880_pctrl_desc;
++ p->groups = rt2880_pinmux_data;
++ platform_set_drvdata(pdev, p);
++
++ /* init the device */
++ if (rt2880_pinmux_index(p)) {
++ dev_err(&pdev->dev, "failed to load index\n");
++ return -EINVAL;
++ }
++ if (rt2880_pinmux_pins(p)) {
++ dev_err(&pdev->dev, "failed to load pins\n");
++ return -EINVAL;
++ }
++ dev = pinctrl_register(p->desc, &pdev->dev, p);
++ if (IS_ERR(dev))
++ return PTR_ERR(dev);
++
++ /* finalize by adding gpio ranges for enables gpio controllers */
++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
++ const __be32 *ngpio, *gpiobase;
++ struct pinctrl_gpio_range *range;
++ char *name;
++
++ if (!of_device_is_available(np))
++ continue;
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (!ngpio || !gpiobase) {
++ dev_err(&pdev->dev, "failed to load chip info\n");
++ return -EINVAL;
++ }
++
++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
++ range->name = name = (char *) &range[1];
++ sprintf(name, "pio");
++ range->npins = __be32_to_cpu(*ngpio);
++ range->base = __be32_to_cpu(*gpiobase);
++ range->pin_base = range->base;
++ pinctrl_add_gpio_range(dev, range);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id rt2880_pinmux_match[] = {
++ { .compatible = "ralink,rt2880-pinmux" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
++
++static struct platform_driver rt2880_pinmux_driver = {
++ .probe = rt2880_pinmux_probe,
++ .driver = {
++ .name = "rt2880-pinmux",
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_pinmux_match,
++ },
++};
++
++int __init rt2880_pinmux_init(void)
++{
++ return platform_driver_register(&rt2880_pinmux_driver);
++}
++
++core_initcall_sync(rt2880_pinmux_init);
diff --git a/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch
new file mode 100644
index 0000000..7d5f98f
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch
@@ -0,0 +1,59 @@
+From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 19:45:30 +0200
+Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
+
+Describe gpio-ralink binding.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+Cc: linux-mips at linux-mips.org
+Cc: devicetree at vger.kernel.org
+Cc: linux-gpio at vger.kernel.org
+---
+ .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -0,0 +1,40 @@
++Ralink SoC GPIO controller bindings
++
++Required properties:
++- compatible:
++ - "ralink,rt2880-gpio" for Ralink controllers
++- #gpio-cells : Should be two.
++ - first cell is the pin number
++ - second cell is used to specify optional parameters (unused)
++- gpio-controller : Marks the device node as a GPIO controller
++- reg : Physical base address and length of the controller's registers
++- interrupt-parent: phandle to the INTC device node
++- interrupts : Specify the INTC interrupt number
++- ralink,num-gpios : Specify the number of GPIOs
++- ralink,register-map : The register layout depends on the GPIO bank and actual
++ SoC type. Register offsets need to be in this order.
++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
++
++Optional properties:
++- ralink,gpio-base : Specify the GPIO chips base number
++
++Example:
++
++ gpio0: gpio at 600 {
++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++
++ #gpio-cells = <2>;
++ gpio-controller;
++
++ reg = <0x600 0x34>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ };
diff --git a/target/linux/ramips/patches-4.9/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-4.9/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
new file mode 100644
index 0000000..83f0d97
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -0,0 +1,430 @@
+From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 4 Aug 2014 20:36:29 +0200
+Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
+
+Add gpio driver for Ralink SoC. This driver makes the gpio core on
+RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+Cc: linux-mips at linux-mips.org
+Cc: linux-gpio at vger.kernel.org
+---
+ arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
+ drivers/gpio/Kconfig | 6 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
+ 4 files changed, 386 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
+ create mode 100644 drivers/gpio/gpio-ralink.c
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
+@@ -0,0 +1,24 @@
++/*
++ * Ralink SoC GPIO API support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg at openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_RALINK_GPIO_H
++#define __ASM_MACH_RALINK_GPIO_H
++
++#define ARCH_NR_GPIOS 128
++#include <asm-generic/gpio.h>
++
++#define gpio_get_value __gpio_get_value
++#define gpio_set_value __gpio_set_value
++#define gpio_cansleep __gpio_cansleep
++#define gpio_to_irq __gpio_to_irq
++
++#endif /* __ASM_MACH_RALINK_GPIO_H */
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -369,6 +369,12 @@ config GPIO_RCAR
+ help
+ Say yes here to support GPIO on Renesas R-Car SoCs.
+
++config GPIO_RALINK
++ bool "Ralink GPIO Support"
++ depends on RALINK
++ help
++ Say yes here to support the Ralink SoC GPIO device
++
+ config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -91,6 +91,7 @@ obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
+ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
+ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
+ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
+ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+ obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
+@@ -0,0 +1,355 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg at openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++
++enum ralink_gpio_reg {
++ GPIO_REG_INT = 0,
++ GPIO_REG_EDGE,
++ GPIO_REG_RENA,
++ GPIO_REG_FENA,
++ GPIO_REG_DATA,
++ GPIO_REG_DIR,
++ GPIO_REG_POL,
++ GPIO_REG_SET,
++ GPIO_REG_RESET,
++ GPIO_REG_TOGGLE,
++ GPIO_REG_MAX
++};
++
++struct ralink_gpio_chip {
++ struct gpio_chip chip;
++ u8 regs[GPIO_REG_MAX];
++
++ spinlock_t lock;
++ void __iomem *membase;
++ struct irq_domain *domain;
++ int irq;
++
++ u32 rising;
++ u32 falling;
++};
++
++#define MAP_MAX 4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
++{
++ struct ralink_gpio_chip *rg;
++
++ rg = container_of(chip, struct ralink_gpio_chip, chip);
++
++ return rg;
++}
++
++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
++{
++ iowrite32(val, rg->membase + rg->regs[reg]);
++}
++
++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
++{
++ return ioread32(rg->membase + rg->regs[reg]);
++}
++
++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
++}
++
++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t &= ~BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ ralink_gpio_set(chip, offset, value);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t |= BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ if (rg->irq < 1)
++ return -1;
++
++ return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(struct irq_desc *desc)
++{
++ int i;
++
++ for (i = 0; i < irq_map_count; i++) {
++ struct irq_domain *domain = irq_map[i];
++ struct ralink_gpio_chip *rg;
++ unsigned long pending;
++ int bit;
++
++ rg = (struct ralink_gpio_chip *) domain->host_data;
++ pending = rt_gpio_r32(rg, GPIO_REG_INT);
++
++ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++ u32 map = irq_find_mapping(domain, bit);
++ generic_handle_irq(map);
++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++ }
++ }
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ struct ralink_gpio_chip *rg;
++ u32 mask = BIT(d->hwirq);
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++
++ if (type == IRQ_TYPE_PROBE) {
++ if ((rg->rising | rg->falling) & mask)
++ return 0;
++
++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
++ }
++
++ if (type & IRQ_TYPE_EDGE_RISING)
++ rg->rising |= mask;
++ else
++ rg->rising &= ~mask;
++
++ if (type & IRQ_TYPE_EDGE_FALLING)
++ rg->falling |= mask;
++ else
++ rg->falling &= ~mask;
++
++ return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++ .name = "GPIO",
++ .irq_unmask = ralink_gpio_irq_unmask,
++ .irq_mask = ralink_gpio_irq_mask,
++ .irq_mask_ack = ralink_gpio_irq_mask,
++ .irq_set_type = ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++ irq_set_handler_data(irq, d);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np,
++ struct ralink_gpio_chip *rg)
++{
++ if (irq_map_count >= MAP_MAX)
++ return;
++
++ rg->irq = irq_of_parse_and_map(np, 0);
++ if (!rg->irq)
++ return;
++
++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
++ &irq_domain_ops, rg);
++ if (!rg->domain) {
++ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
++ return;
++ }
++
++ irq_map[irq_map_count++] = rg->domain;
++
++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++ if (!atomic_read(&irq_refcount))
++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++ atomic_inc(&irq_refcount);
++
++ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
++static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ return pinctrl_request_gpio(gpio);
++}
++
++static void ralink_gpio_free(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ pinctrl_free_gpio(gpio);
++}
++
++static int ralink_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct ralink_gpio_chip *rg;
++ const __be32 *ngpio, *gpiobase;
++
++ if (!res) {
++ dev_err(&pdev->dev, "failed to find resource\n");
++ return -ENOMEM;
++ }
++
++ rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++ if (!rg)
++ return -ENOMEM;
++
++ rg->membase = devm_ioremap_resource(&pdev->dev, res);
++ if (!rg->membase) {
++ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
++ return -ENOMEM;
++ }
++
++ if (of_property_read_u8_array(np, "ralink,register-map",
++ rg->regs, GPIO_REG_MAX)) {
++ dev_err(&pdev->dev, "failed to read register definition\n");
++ return -EINVAL;
++ }
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ if (!ngpio) {
++ dev_err(&pdev->dev, "failed to read number of pins\n");
++ return -EINVAL;
++ }
++
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (gpiobase)
++ rg->chip.base = be32_to_cpu(*gpiobase);
++ else
++ rg->chip.base = -1;
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.parent = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = np;
++ rg->chip.ngpio = be32_to_cpu(*ngpio);
++ rg->chip.direction_input = ralink_gpio_direction_input;
++ rg->chip.direction_output = ralink_gpio_direction_output;
++ rg->chip.get = ralink_gpio_get;
++ rg->chip.set = ralink_gpio_set;
++ rg->chip.request = ralink_gpio_request;
++ rg->chip.to_irq = ralink_gpio_to_irq;
++ rg->chip.free = ralink_gpio_free;
++
++ /* set polarity to low for all lines */
++ rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ ralink_gpio_irq_init(np, rg);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static const struct of_device_id ralink_gpio_match[] = {
++ { .compatible = "ralink,rt2880-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_gpio_match);
++
++static struct platform_driver ralink_gpio_driver = {
++ .probe = ralink_gpio_probe,
++ .driver = {
++ .name = "rt2880_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_gpio_match,
++ },
++};
++
++static int __init ralink_gpio_init(void)
++{
++ return platform_driver_register(&ralink_gpio_driver);
++}
++
++subsys_initcall(ralink_gpio_init);
diff --git a/target/linux/ramips/patches-4.9/0028-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.9/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
new file mode 100644
index 0000000..ca3dc84
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
@@ -0,0 +1,405 @@
+From 61ac7d9b4228de8c332900902c2b93189b042eab Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 11:00:32 +0100
+Subject: [PATCH 28/53] GPIO: ralink: add mt7621 gpio controller
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/Kconfig | 3 +
+ drivers/gpio/Kconfig | 6 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-mt7621.c | 354 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 364 insertions(+)
+ create mode 100644 drivers/gpio/gpio-mt7621.c
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -619,6 +619,9 @@ config RALINK
+ select RESET_CONTROLLER
+ select PINCTRL
+ select PINCTRL_RT2880
++ select ARCH_HAS_RESET_CONTROLLER
++ select RESET_CONTROLLER
++ select ARCH_REQUIRE_GPIOLIB
+
+ config SGI_IP22
+ bool "SGI IP22 (Indy/Indigo2)"
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -270,6 +270,12 @@ config GPIO_MENZ127
+ help
+ Say yes here to support the MEN 16Z127 GPIO Controller
+
++config GPIO_MT7621
++ bool "Mediatek GPIO Support"
++ depends on SOC_MT7620 || SOC_MT7621
++ help
++ Say yes here to support the Mediatek SoC GPIO device
++
+ config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -142,3 +142,4 @@ obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
+ obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
+ obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
+ obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
++obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
+--- /dev/null
++++ b/drivers/gpio/gpio-mt7621.c
+@@ -0,0 +1,354 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg at openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++#include <linux/module.h>
++#include <linux/of_irq.h>
++#include <linux/spinlock.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++
++#define MTK_MAX_BANK 3
++#define MTK_BANK_WIDTH 32
++
++enum mediatek_gpio_reg {
++ GPIO_REG_CTRL = 0,
++ GPIO_REG_POL,
++ GPIO_REG_DATA,
++ GPIO_REG_DSET,
++ GPIO_REG_DCLR,
++ GPIO_REG_REDGE,
++ GPIO_REG_FEDGE,
++ GPIO_REG_HLVL,
++ GPIO_REG_LLVL,
++ GPIO_REG_STAT,
++ GPIO_REG_EDGE,
++};
++
++static void __iomem *mediatek_gpio_membase;
++static int mediatek_gpio_irq;
++static struct irq_domain *mediatek_gpio_irq_domain;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++struct mtk_gc {
++ struct gpio_chip chip;
++ spinlock_t lock;
++ int bank;
++ u32 rising;
++ u32 falling;
++} *gc_map[MTK_MAX_BANK];
++
++static inline struct mtk_gc
++*to_mediatek_gpio(struct gpio_chip *chip)
++{
++ struct mtk_gc *mgc;
++
++ mgc = container_of(chip, struct mtk_gc, chip);
++
++ return mgc;
++}
++
++static inline void
++mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
++{
++ iowrite32(val, mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
++}
++
++static inline u32
++mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
++{
++ return ioread32(mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
++}
++
++static void
++mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++
++ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
++}
++
++static int
++mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++
++ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int
++mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
++ t &= ~BIT(offset);
++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int
++mediatek_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
++ t |= BIT(offset);
++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
++ mediatek_gpio_set(chip, offset, value);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int
++mediatek_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ if (t & BIT(offset))
++ return 0;
++
++ return 1;
++}
++
++static int
++mediatek_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++
++ return irq_create_mapping(mediatek_gpio_irq_domain, pin + (rg->bank * MTK_BANK_WIDTH));
++}
++
++static int
++mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
++{
++ const __be32 *id = of_get_property(bank, "reg", NULL);
++ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct mtk_gc), GFP_KERNEL);
++
++ if (!rg || !id || be32_to_cpu(*id) > MTK_MAX_BANK)
++ return -ENOMEM;
++
++ gc_map[be32_to_cpu(*id)] = rg;
++
++ memset(rg, 0, sizeof(struct mtk_gc));
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.parent = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = bank;
++ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
++ rg->chip.ngpio = MTK_BANK_WIDTH;
++ rg->chip.direction_input = mediatek_gpio_direction_input;
++ rg->chip.direction_output = mediatek_gpio_direction_output;
++ rg->chip.get_direction = mediatek_gpio_get_direction;
++ rg->chip.get = mediatek_gpio_get;
++ rg->chip.set = mediatek_gpio_set;
++ if (mediatek_gpio_irq_domain)
++ rg->chip.to_irq = mediatek_gpio_to_irq;
++ rg->bank = be32_to_cpu(*id);
++
++ /* set polarity to low for all gpios */
++ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static void
++mediatek_gpio_irq_handler(struct irq_desc *desc)
++{
++ int i;
++
++ for (i = 0; i < MTK_MAX_BANK; i++) {
++ struct mtk_gc *rg = gc_map[i];
++ unsigned long pending;
++ int bit;
++
++ if (!rg)
++ continue;
++
++ pending = mtk_gpio_r32(rg, GPIO_REG_STAT);
++
++ for_each_set_bit(bit, &pending, MTK_BANK_WIDTH) {
++ u32 map = irq_find_mapping(mediatek_gpio_irq_domain, (MTK_BANK_WIDTH * i) + bit);
++
++ generic_handle_irq(map);
++ mtk_gpio_w32(rg, GPIO_REG_STAT, BIT(bit));
++ }
++ }
++}
++
++static void
++mediatek_gpio_irq_unmask(struct irq_data *d)
++{
++ int pin = d->hwirq;
++ int bank = pin / 32;
++ struct mtk_gc *rg = gc_map[bank];
++ unsigned long flags;
++ u32 rise, fall;
++
++ if (!rg)
++ return;
++
++ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
++ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(d->hwirq) & rg->rising));
++ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (BIT(d->hwirq) & rg->falling));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void
++mediatek_gpio_irq_mask(struct irq_data *d)
++{
++ int pin = d->hwirq;
++ int bank = pin / 32;
++ struct mtk_gc *rg = gc_map[bank];
++ unsigned long flags;
++ u32 rise, fall;
++
++ if (!rg)
++ return;
++
++ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
++ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~BIT(d->hwirq));
++ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~BIT(d->hwirq));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int
++mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ int pin = d->hwirq;
++ int bank = pin / 32;
++ struct mtk_gc *rg = gc_map[bank];
++ u32 mask = BIT(d->hwirq);
++
++ if (!rg)
++ return -1;
++
++ if (type == IRQ_TYPE_PROBE) {
++ if ((rg->rising | rg->falling) & mask)
++ return 0;
++
++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
++ }
++
++ if (type & IRQ_TYPE_EDGE_RISING)
++ rg->rising |= mask;
++ else
++ rg->rising &= ~mask;
++
++ if (type & IRQ_TYPE_EDGE_FALLING)
++ rg->falling |= mask;
++ else
++ rg->falling &= ~mask;
++
++ return 0;
++}
++
++static struct irq_chip mediatek_gpio_irq_chip = {
++ .name = "GPIO",
++ .irq_unmask = mediatek_gpio_irq_unmask,
++ .irq_mask = mediatek_gpio_irq_mask,
++ .irq_mask_ack = mediatek_gpio_irq_mask,
++ .irq_set_type = mediatek_gpio_irq_type,
++};
++
++static int
++mediatek_gpio_gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, &mediatek_gpio_irq_chip, handle_level_irq);
++ irq_set_handler_data(irq, d);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = mediatek_gpio_gpio_map,
++};
++
++static int
++mediatek_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *bank, *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ mediatek_gpio_membase = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(mediatek_gpio_membase))
++ return PTR_ERR(mediatek_gpio_membase);
++
++ mediatek_gpio_irq = irq_of_parse_and_map(np, 0);
++ if (mediatek_gpio_irq) {
++ mediatek_gpio_irq_domain = irq_domain_add_linear(np,
++ MTK_MAX_BANK * MTK_BANK_WIDTH,
++ &irq_domain_ops, NULL);
++ if (!mediatek_gpio_irq_domain)
++ dev_err(&pdev->dev, "irq_domain_add_linear failed\n");
++ }
++
++ for_each_child_of_node(np, bank)
++ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
++ mediatek_gpio_bank_probe(pdev, bank);
++
++ if (mediatek_gpio_irq_domain)
++ irq_set_chained_handler(mediatek_gpio_irq, mediatek_gpio_irq_handler);
++
++ return 0;
++}
++
++static const struct of_device_id mediatek_gpio_match[] = {
++ { .compatible = "mtk,mt7621-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
++
++static struct platform_driver mediatek_gpio_driver = {
++ .probe = mediatek_gpio_probe,
++ .driver = {
++ .name = "mt7621_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = mediatek_gpio_match,
++ },
++};
++
++static int __init
++mediatek_gpio_init(void)
++{
++ return platform_driver_register(&mediatek_gpio_driver);
++}
++
++subsys_initcall(mediatek_gpio_init);
diff --git a/target/linux/ramips/patches-4.9/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.9/0029-phy-usb-add-ralink-phy.patch
new file mode 100644
index 0000000..95ba1af
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0029-phy-usb-add-ralink-phy.patch
@@ -0,0 +1,293 @@
+From b00b5eafa7e8d059bd0ce844e66f648916953270 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 3 Jan 2016 19:11:22 +0100
+Subject: [PATCH 2/3] phy: ralink-usb: add driver for Mediatek/Ralink
+
+Add a driver to setup the USB phy on Mediatek/Ralink SoCs.
+The driver is trivial and only sets up power and host mode.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ .../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++
+ drivers/phy/Kconfig | 8 +
+ drivers/phy/Makefile | 1 +
+ drivers/phy/phy-ralink-usb.c | 171 ++++++++++++++++++++
+ 4 files changed, 197 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
+ create mode 100644 drivers/phy/phy-ralink-usb.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
+@@ -0,0 +1,17 @@
++Mediatek/Ralink USB PHY
++
++Required properties:
++ - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy
++ - #phy-cells: should be 0
++ - resets: the two reset controllers for host and device
++ - reset-names: the names of the 2 reset controllers
++
++Example:
++
++usbphy: phy {
++ compatible = "mediatek,mt7620-usbphy";
++ #phy-cells = <0>;
++
++ resets = <&rstctrl 22 &rstctrl 25>;
++ reset-names = "host", "device";
++};
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -429,6 +429,14 @@ config PHY_XGENE
+ help
+ This option enables support for APM X-Gene SoC multi-purpose PHY.
+
++config PHY_RALINK_USB
++ tristate "Ralink USB PHY driver"
++ select GENERIC_PHY
++ depends on RALINK
++ help
++ This option enables support for the Ralink USB PHY found inside
++ RT3352 and MT7620.
++
+ config PHY_STIH407_USB
+ tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on RESET_CONTROLLER
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -60,3 +60,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-
+ obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+ obj-$(CONFIG_ARCH_TEGRA) += tegra/
+ obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
++obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
+--- /dev/null
++++ b/drivers/phy/phy-ralink-usb.c
+@@ -0,0 +1,228 @@
++/*
++ * Allwinner ralink USB phy driver
++ *
++ * Copyright (C) 2016 John Crispin <blogic at openwrt.org>
++ *
++ * Based on code from
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/reset.h>
++#include <linux/of_platform.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1 0x014
++#define RT_SYSC_REG_CLKCFG1 0x030
++#define RT_SYSC_REG_USB_PHY_CFG 0x05c
++
++#define OFS_U2_PHY_AC0 0x800
++#define OFS_U2_PHY_AC1 0x804
++#define OFS_U2_PHY_AC2 0x808
++#define OFS_U2_PHY_ACR0 0x810
++#define OFS_U2_PHY_ACR1 0x814
++#define OFS_U2_PHY_ACR2 0x818
++#define OFS_U2_PHY_ACR3 0x81C
++#define OFS_U2_PHY_ACR4 0x820
++#define OFS_U2_PHY_AMON0 0x824
++#define OFS_U2_PHY_DCR0 0x860
++#define OFS_U2_PHY_DCR1 0x864
++#define OFS_U2_PHY_DTM0 0x868
++#define OFS_U2_PHY_DTM1 0x86C
++
++#define RT_RSTCTRL_UDEV BIT(25)
++#define RT_RSTCTRL_UHST BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
++#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
++#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
++
++#define USB_PHY_UTMI_8B60M BIT(1)
++#define UDEV_WAKEUP BIT(0)
++
++struct ralink_usb_phy {
++ struct reset_control *rstdev;
++ struct reset_control *rsthost;
++ u32 clk;
++ struct phy *phy;
++ void __iomem *base;
++};
++
++static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
++{
++ iowrite32(val, phy->base + reg);
++}
++
++static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
++{
++ return ioread32(phy->base + reg);
++}
++
++static void
++u2_phy_init(struct ralink_usb_phy *phy)
++{
++ u2_phy_r32(phy, OFS_U2_PHY_AC2);
++ u2_phy_r32(phy, OFS_U2_PHY_ACR0);
++ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++
++ u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
++ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++ u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
++ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++ u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
++ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++ u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
++ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++ u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
++ u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
++ u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
++ u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
++}
++
++static int ralink_usb_phy_power_on(struct phy *_phy)
++{
++ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
++ u32 t;
++
++ /* enable the phy */
++ rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1);
++
++ /* setup host mode */
++ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++
++ /* deassert the reset lines */
++ reset_control_deassert(phy->rsthost);
++ reset_control_deassert(phy->rstdev);
++
++ /*
++ * The SDK kernel had a delay of 100ms. however on device
++ * testing showed that 10ms is enough
++ */
++ mdelay(10);
++
++ if (!IS_ERR(phy->base))
++ u2_phy_init(phy);
++
++ /* print some status info */
++ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++ dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
++ (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
++ if (t & USB_PHY_UTMI_8B60M)
++ dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
++ else
++ dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
++
++ return 0;
++}
++
++static int ralink_usb_phy_power_off(struct phy *_phy)
++{
++ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
++
++ /* assert the reset lines */
++ reset_control_assert(phy->rstdev);
++ reset_control_assert(phy->rsthost);
++
++ /* disable the phy */
++ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
++
++ return 0;
++}
++
++static struct phy_ops ralink_usb_phy_ops = {
++ .power_on = ralink_usb_phy_power_on,
++ .power_off = ralink_usb_phy_power_off,
++ .owner = THIS_MODULE,
++};
++
++static const struct of_device_id ralink_usb_phy_of_match[] = {
++ {
++ .compatible = "ralink,rt3352-usbphy",
++ .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
++ RT_CLKCFG1_UPHY0_CLK_EN)
++ },
++ {
++ .compatible = "mediatek,mt7620-usbphy",
++ .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
++ MT7620_CLKCFG1_UPHY0_CLK_EN) },
++ { },
++};
++MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
++
++static int ralink_usb_phy_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct device *dev = &pdev->dev;
++ struct phy_provider *phy_provider;
++ const struct of_device_id *match;
++ struct ralink_usb_phy *phy;
++
++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++ if (!phy)
++ return -ENOMEM;
++
++ match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
++ if (!match)
++ return -ENODEV;
++
++ phy->clk = (int) match->data;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ phy->base = devm_ioremap_resource(&pdev->dev, res);
++
++ phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
++ if (IS_ERR(phy->rsthost)) {
++ dev_err(dev, "host reset is missing\n");
++ return PTR_ERR(phy->rsthost);
++ }
++
++ phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
++ if (IS_ERR(phy->rstdev)) {
++ dev_err(dev, "device reset is missing\n");
++ return PTR_ERR(phy->rstdev);
++ }
++
++ phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
++ if (IS_ERR(phy->phy)) {
++ dev_err(dev, "failed to create PHY\n");
++ return PTR_ERR(phy->phy);
++ }
++ phy_set_drvdata(phy->phy, phy);
++
++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static struct platform_driver ralink_usb_phy_driver = {
++ .probe = ralink_usb_phy_probe,
++ .driver = {
++ .of_match_table = ralink_usb_phy_of_match,
++ .name = "ralink-usb-phy",
++ }
++};
++module_platform_driver(ralink_usb_phy_driver);
++
++MODULE_DESCRIPTION("Ralink USB phy driver");
++MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ramips/patches-4.9/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-4.9/0031-uvc-add-iPassion-iP2970-support.patch
new file mode 100644
index 0000000..6cfb07d
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0031-uvc-add-iPassion-iP2970-support.patch
@@ -0,0 +1,246 @@
+From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 19 Sep 2013 01:50:59 +0200
+Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/media/usb/uvc/uvc_driver.c | 12 +++
+ drivers/media/usb/uvc/uvc_status.c | 2 +
+ drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
+ drivers/media/usb/uvc/uvcvideo.h | 5 +-
+ 4 files changed, 165 insertions(+), 1 deletion(-)
+
+--- a/drivers/media/usb/uvc/uvc_driver.c
++++ b/drivers/media/usb/uvc/uvc_driver.c
+@@ -2564,6 +2564,18 @@ static struct usb_device_id uvc_ids[] =
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FORCE_Y8 },
++ /* iPassion iP2970 */
++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
++ | USB_DEVICE_ID_MATCH_INT_INFO,
++ .idVendor = 0x1B3B,
++ .idProduct = 0x2970,
++ .bInterfaceClass = USB_CLASS_VIDEO,
++ .bInterfaceSubClass = 1,
++ .bInterfaceProtocol = 0,
++ .driver_info = UVC_QUIRK_PROBE_MINMAX
++ | UVC_QUIRK_STREAM_NO_FID
++ | UVC_QUIRK_MOTION
++ | UVC_QUIRK_SINGLE_ISO },
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
+--- a/drivers/media/usb/uvc/uvc_status.c
++++ b/drivers/media/usb/uvc/uvc_status.c
+@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
+ switch (dev->status[0] & 0x0f) {
+ case UVC_STATUS_TYPE_CONTROL:
+ uvc_event_control(dev, dev->status, len);
++ dev->motion = 1;
+ break;
+
+ case UVC_STATUS_TYPE_STREAMING:
+@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
+ }
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
++ dev->motion = 0;
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+--- a/drivers/media/usb/uvc/uvc_video.c
++++ b/drivers/media/usb/uvc/uvc_video.c
+@@ -21,6 +21,11 @@
+ #include <linux/wait.h>
+ #include <linux/atomic.h>
+ #include <asm/unaligned.h>
++#include <linux/skbuff.h>
++#include <linux/kobject.h>
++#include <linux/netlink.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
+
+ #include <media/v4l2-common.h>
+
+@@ -1087,9 +1092,149 @@ static void uvc_video_decode_data(struct
+ }
+ }
+
++struct bh_priv {
++ unsigned long seen;
++};
++
++struct bh_event {
++ const char *name;
++ struct sk_buff *skb;
++ struct work_struct work;
++};
++
++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
++#define BH_DBG(fmt, args...) do {} while (0)
++#define BH_SKB_SIZE 2048
++
++extern u64 uevent_next_seqnum(void);
++static int seen = 0;
++
++static int bh_event_add_var(struct bh_event *event, int argv,
++ const char *format, ...)
++{
++ static char buf[128];
++ char *s;
++ va_list args;
++ int len;
++
++ if (argv)
++ return 0;
++
++ va_start(args, format);
++ len = vsnprintf(buf, sizeof(buf), format, args);
++ va_end(args);
++
++ if (len >= sizeof(buf)) {
++ BH_ERR("buffer size too small\n");
++ WARN_ON(1);
++ return -ENOMEM;
++ }
++
++ s = skb_put(event->skb, len + 1);
++ strcpy(s, buf);
++
++ BH_DBG("added variable '%s'\n", s);
++
++ return 0;
++}
++
++static int motion_hotplug_fill_event(struct bh_event *event)
++{
++ int s = jiffies;
++ int ret;
++
++ if (!seen)
++ seen = jiffies;
++
++ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "PATH=%s",
++ "/sbin:/bin:/usr/sbin:/usr/bin");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "ACTION=motion");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
++ if (ret)
++ return ret;
++ seen = s;
++
++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
++
++ return ret;
++}
++
++static void motion_hotplug_work(struct work_struct *work)
++{
++ struct bh_event *event = container_of(work, struct bh_event, work);
++ int ret = 0;
++
++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
++ if (!event->skb)
++ goto out_free_event;
++
++ ret = bh_event_add_var(event, 0, "%s@", "add");
++ if (ret)
++ goto out_free_skb;
++
++ ret = motion_hotplug_fill_event(event);
++ if (ret)
++ goto out_free_skb;
++
++ NETLINK_CB(event->skb).dst_group = 1;
++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
++
++out_free_skb:
++ if (ret) {
++ BH_ERR("work error %d\n", ret);
++ kfree_skb(event->skb);
++ }
++out_free_event:
++ kfree(event);
++}
++
++static int motion_hotplug_create_event(void)
++{
++ struct bh_event *event;
++
++ event = kzalloc(sizeof(*event), GFP_KERNEL);
++ if (!event)
++ return -ENOMEM;
++
++ event->name = "motion";
++
++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
++ schedule_work(&event->work);
++
++ return 0;
++}
++
++#define MOTION_FLAG_OFFSET 4
+ static void uvc_video_decode_end(struct uvc_streaming *stream,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+ {
++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
++ u8 *mem;
++ buf->state = UVC_BUF_STATE_READY;
++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
++ if ( stream->dev->motion ) {
++ stream->dev->motion = 0;
++ motion_hotplug_create_event();
++ } else {
++ *mem &= 0x7f;
++ }
++ }
++
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+@@ -1503,6 +1648,8 @@ static int uvc_init_video_isoc(struct uv
+ if (npackets == 0)
+ return -ENOMEM;
+
++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
++ npackets = 1;
+ size = npackets * psize;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+--- a/drivers/media/usb/uvc/uvcvideo.h
++++ b/drivers/media/usb/uvc/uvcvideo.h
+@@ -164,7 +164,9 @@
+ #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
+ #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
+ #define UVC_QUIRK_FORCE_Y8 0x00000800
+-
++#define UVC_QUIRK_MOTION 0x00001000
++#define UVC_QUIRK_SINGLE_ISO 0x00002000
++
+ /* Format flags */
+ #define UVC_FMT_FLAG_COMPRESSED 0x00000001
+ #define UVC_FMT_FLAG_STREAM 0x00000002
+@@ -562,6 +564,7 @@ struct uvc_device {
+ __u8 *status;
+ struct input_dev *input;
+ char input_phys[64];
++ int motion;
+ };
+
+ enum uvc_handle_state {
diff --git a/target/linux/ramips/patches-4.9/0032-USB-dwc2-add-device_reset.patch b/target/linux/ramips/patches-4.9/0032-USB-dwc2-add-device_reset.patch
new file mode 100644
index 0000000..efb3b80
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0032-USB-dwc2-add-device_reset.patch
@@ -0,0 +1,29 @@
+From a758e0870c6d1e4b0272f6e7f9efa9face5534bb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 32/53] USB: dwc2: add device_reset()
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/usb/dwc2/hcd.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/dwc2/hcd.c
++++ b/drivers/usb/dwc2/hcd.c
+@@ -47,6 +47,7 @@
+ #include <linux/io.h>
+ #include <linux/slab.h>
+ #include <linux/usb.h>
++#include <linux/reset.h>
+
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ch11.h>
+@@ -4982,6 +4983,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
+
+ retval = -ENOMEM;
+
++ device_reset(hsotg->dev);
++
+ hcfg = dwc2_readl(hsotg->regs + HCFG);
+ dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
+
diff --git a/target/linux/ramips/patches-4.9/0034-NET-multi-phy-support.patch b/target/linux/ramips/patches-4.9/0034-NET-multi-phy-support.patch
new file mode 100644
index 0000000..f18a789
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0034-NET-multi-phy-support.patch
@@ -0,0 +1,53 @@
+From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 34/53] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/net/phy/phy.c | 9 ++++++---
+ include/linux/phy.h | 1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -996,7 +996,8 @@ void phy_state_machine(struct work_struc
+ /* If the link is down, give up on negotiation for now */
+ if (!phydev->link) {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ }
+@@ -1079,7 +1080,8 @@ void phy_state_machine(struct work_struc
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+@@ -1091,7 +1093,8 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ do_suspend = true;
+ }
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -373,6 +373,7 @@ struct phy_device {
+ bool is_pseudo_fixed_link;
+ bool has_fixups;
+ bool suspended;
++ bool no_auto_carrier_off;
+
+ enum phy_state state;
+
diff --git a/target/linux/ramips/patches-4.9/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-4.9/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
new file mode 100644
index 0000000..22e56be
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
@@ -0,0 +1,29 @@
+From 8e72a3a1be8f6328bd7ef491332ba541547b6086 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 15 Jul 2013 00:38:51 +0200
+Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -2289,7 +2289,7 @@ static int __xipram do_erase_chip(struct
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr))
++ if (chip_good(map, adr, map_word_ff(map)))
+ break;
+
+ if (time_after(jiffies, timeo)) {
+@@ -2378,7 +2378,7 @@ static int __xipram do_erase_oneblock(st
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr)) {
++ if (chip_good(map, adr, map_word_ff(map))) {
+ xip_enable(map, chip, adr);
+ break;
+ }
diff --git a/target/linux/ramips/patches-4.9/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.9/0037-mtd-cfi-cmdset-0002-force-word-write.patch
new file mode 100644
index 0000000..ed3b36e
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0037-mtd-cfi-cmdset-0002-force-word-write.patch
@@ -0,0 +1,70 @@
+From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 15 Jul 2013 00:39:21 +0200
+Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_WORD_RETRIES 3
+
+@@ -51,7 +51,9 @@
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ struct map_info *map = mtd->priv;
+@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
+ mtd->_write = cfi_amdstd_write_buffers;
+ }
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1787,6 +1791,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const u_char *buf,
+ int len)
+@@ -1915,7 +1920,6 @@ static int __xipram do_write_buffer(stru
+ return ret;
+ }
+
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1990,6 +1994,7 @@ static int cfi_amdstd_write_buffers(stru
+
+ return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /*
+ * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-4.9/0041-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-4.9/0041-DT-Add-documentation-for-spi-rt2880.patch
new file mode 100644
index 0000000..e2643e3
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0041-DT-Add-documentation-for-spi-rt2880.patch
@@ -0,0 +1,44 @@
+From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Fri, 9 Aug 2013 20:12:59 +0200
+Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
+
+Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+@@ -0,0 +1,28 @@
++Ralink SoC RT2880 SPI master controller.
++
++This SPI controller is found on most wireless SoCs made by ralink.
++
++Required properties:
++- compatible : "ralink,rt2880-spi"
++- reg : The register base for the controller.
++- #address-cells : <1>, as required by generic SPI binding.
++- #size-cells : <0>, also as required by generic SPI binding.
++
++Child nodes as per the generic SPI binding.
++
++Example:
++
++ spi at b00 {
++ compatible = "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ m25p80 at 0 {
++ compatible = "m25p80";
++ reg = <0>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++
diff --git a/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
new file mode 100644
index 0000000..0288b97
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -0,0 +1,574 @@
+From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+Acked-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 537 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -533,6 +533,12 @@ config SPI_QUP
+ This driver can also be built as a module. If so, the module
+ will be called spi_qup.
+
++config SPI_RT2880
++ tristate "Ralink RT288x SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -76,6 +76,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,530 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm at gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg at openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi at marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "spi-rt2880"
++
++#define RAMIPS_SPI_STAT 0x00
++#define RAMIPS_SPI_CFG 0x10
++#define RAMIPS_SPI_CTL 0x14
++#define RAMIPS_SPI_DATA 0x20
++#define RAMIPS_SPI_ADDR 0x24
++#define RAMIPS_SPI_BS 0x28
++#define RAMIPS_SPI_USER 0x2C
++#define RAMIPS_SPI_TXFIFO 0x30
++#define RAMIPS_SPI_RXFIFO 0x34
++#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_MODE 0x3C
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++#define RAMIPS_SPI_DMA 0x80
++#define RAMIPS_SPI_DMASTAT 0x84
++#define RAMIPS_SPI_ARBITER 0xF0
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_ADDRMODE BIT(12)
++#define SPICFG_RXENVDIS BIT(11)
++#define SPICFG_RXCAP BIT(10)
++#define SPICFG_SPIENMODE BIT(9)
++#define SPICFG_MSBFIRST BIT(8)
++#define SPICFG_SPICLKPOL BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING BIT(4)
++#define SPICFG_HIZSPI BIT(3)
++#define SPICFG_SPICLK_PRESCALE_MASK 0x7
++#define SPICFG_SPICLK_DIV2 0
++#define SPICFG_SPICLK_DIV4 1
++#define SPICFG_SPICLK_DIV8 2
++#define SPICFG_SPICLK_DIV16 3
++#define SPICFG_SPICLK_DIV32 4
++#define SPICFG_SPICLK_DIV64 5
++#define SPICFG_SPICLK_DIV128 6
++#define SPICFG_SPICLK_DISABLE 7
++
++/* SPICTL register bit field */
++#define SPICTL_START BIT(4)
++#define SPICTL_HIZSDO BIT(3)
++#define SPICTL_STARTWR BIT(2)
++#define SPICTL_STARTRD BIT(1)
++#define SPICTL_SPIENA BIT(0)
++
++/* SPIUSER register bit field */
++#define SPIUSER_USERMODE BIT(21)
++#define SPIUSER_INSTR_PHASE BIT(20)
++#define SPIUSER_ADDR_PHASE_MASK 0x7
++#define SPIUSER_ADDR_PHASE_OFFSET 17
++#define SPIUSER_MODE_PHASE BIT(16)
++#define SPIUSER_DUMMY_PHASE_MASK 0x3
++#define SPIUSER_DUMMY_PHASE_OFFSET 14
++#define SPIUSER_DATA_PHASE_MASK 0x3
++#define SPIUSER_DATA_PHASE_OFFSET 12
++#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_ADDR_TYPE_OFFSET 9
++#define SPIUSER_MODE_TYPE_OFFSET 6
++#define SPIUSER_DUMMY_TYPE_OFFSET 3
++#define SPIUSER_DATA_TYPE_OFFSET 0
++#define SPIUSER_TRANSFER_MASK 0x7
++#define SPIUSER_TRANSFER_SINGLE BIT(0)
++#define SPIUSER_TRANSFER_DUAL BIT(1)
++#define SPIUSER_TRANSFER_QUAD BIT(2)
++
++#define SPIUSER_TRANSFER_TYPE(type) ( \
++ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
++ (type << SPIUSER_MODE_TYPE_OFFSET) | \
++ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
++ (type << SPIUSER_DATA_TYPE_OFFSET) \
++)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXEMPTY BIT(19)
++#define SPIFIFOSTAT_RXEMPTY BIT(18)
++#define SPIFIFOSTAT_TXFULL BIT(17)
++#define SPIFIFOSTAT_RXFULL BIT(16)
++#define SPIFIFOSTAT_FIFO_MASK 0xff
++#define SPIFIFOSTAT_TX_OFFSET 8
++#define SPIFIFOSTAT_RX_OFFSET 0
++
++#define SPI_FIFO_DEPTH 16
++
++/* SPIMODE register bit field */
++#define SPIMODE_MODE_OFFSET 24
++#define SPIMODE_DUMMY_OFFSET 0
++
++/* SPIARB register bit field */
++#define SPICTL_ARB_EN BIT(31)
++#define SPICTL_CSCTL1 BIT(16)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
++ SPI_CS_HIGH)
++
++static atomic_t hw_reset_count = ATOMIC_INIT(0);
++
++struct rt2880_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ u32 speed;
++ u16 wait_loops;
++ u16 mode;
++ struct clk *clk;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
++ const u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) | mask), addr);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) & ~mask), addr);
++}
++
++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ u32 rate;
++ u32 prescale;
++
++ /*
++ * the supported rates are: 2, 4, 8, ... 128
++ * round up as we look for equal or less speed
++ */
++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
++ rate = roundup_pow_of_two(rate);
++
++ /* Convert the rate to SPI clock divisor value. */
++ prescale = ilog2(rate / 2);
++
++ /* some tolerance. double and add 100 */
++ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
++ (clk_get_rate(rs->clk) / rate);
++ rs->wait_loops = (rs->wait_loops << 1) + 100;
++ rs->speed = speed;
++
++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
++ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
++ rs->wait_loops);
++
++ return prescale;
++}
++
++static u32 get_arbiter_offset(struct spi_master *master)
++{
++ u32 offset;
++
++ offset = RAMIPS_SPI_ARBITER;
++ if (master->bus_num == 1)
++ offset -= RAMIPS_SPI_DEV_OFFSET;
++
++ return offset;
++}
++
++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++ if (enable)
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ else
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
++{
++ int loop = rs->wait_loops * len;
++
++ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
++ cpu_relax();
++
++ if (loop)
++ return 0;
++
++ return -ETIMEDOUT;
++}
++
++static void rt2880_dump_reg(struct spi_master *master)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++
++ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
++ "data: %08x, arb: %08x\n",
++ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
++ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
++ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
++ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
++ rt2880_spi_read(rs, get_arbiter_offset(master)));
++}
++
++static int rt2880_spi_transfer_one(struct spi_master *master,
++ struct spi_device *spi, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ unsigned len;
++ const u8 *tx = xfer->tx_buf;
++ u8 *rx = xfer->rx_buf;
++ int err = 0;
++
++ /* change clock speed */
++ if (unlikely(rs->speed != xfer->speed_hz)) {
++ u32 reg;
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
++ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ }
++
++ if (tx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "TX failed, err=%d\n", err);
++ goto out;
++ }
++ }
++ }
++
++ if (rx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "RX failed, err=%d\n", err);
++ goto out;
++ }
++ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ }
++ }
++
++out:
++ return err;
++}
++
++/* copy from spi.c */
++static void spi_set_cs(struct spi_device *spi, bool enable)
++{
++ if (spi->mode & SPI_CS_HIGH)
++ enable = !enable;
++
++ if (spi->cs_gpio >= 0)
++ gpio_set_value(spi->cs_gpio, !enable);
++ else if (spi->master->set_cs)
++ spi->master->set_cs(spi, !enable);
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++ struct spi_master *master = spi->master;
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ u32 reg, old_reg, arbit_off;
++
++ if ((spi->max_speed_hz > master->max_speed_hz) ||
++ (spi->max_speed_hz < master->min_speed_hz)) {
++ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ if (!(master->bits_per_word_mask &
++ BIT(spi->bits_per_word - 1))) {
++ dev_err(&spi->dev, "invalide bits_per_word %d\n",
++ spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ /* the hardware seems can't work on mode0 force it to mode3 */
++ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
++ dev_warn(&spi->dev, "force spi mode3\n");
++ spi->mode |= SPI_MODE_3;
++ }
++
++ /* chip polarity */
++ arbit_off = get_arbiter_offset(master);
++ reg = old_reg = rt2880_spi_read(rs, arbit_off);
++ if (spi->mode & SPI_CS_HIGH) {
++ switch (master->bus_num) {
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ default:
++ reg |= SPI0_POR;
++ break;
++ }
++ } else {
++ switch (master->bus_num) {
++ case 1:
++ reg &= ~SPI1_POR;
++ break;
++ default:
++ reg &= ~SPI0_POR;
++ break;
++ }
++ }
++
++ /* enable spi1 */
++ if (master->bus_num == 1)
++ reg |= SPICTL_ARB_EN;
++
++ if (reg != old_reg)
++ rt2880_spi_write(rs, arbit_off, reg);
++
++ /* deselected the spi device */
++ spi_set_cs(spi, false);
++
++ rt2880_dump_reg(master);
++
++ return 0;
++}
++
++static int rt2880_spi_prepare_message(struct spi_master *master,
++ struct spi_message *msg)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = msg->spi;
++ u32 reg;
++
++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
++ return 0;
++
++#if 0
++ /* set spido to tri-state */
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
++#endif
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++
++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
++ SPICFG_RXCLKEDGE_FALLING |
++ SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_PRESCALE_MASK);
++
++ /* MSB */
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ /* spi mode */
++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++ rs->mode = spi->mode;
++
++#if 0
++ /* set spiclk and spiena to tri-state */
++ reg |= SPICFG_HIZSPI;
++#endif
++
++ /* clock divide */
++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++
++ return 0;
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++ void __iomem *base;
++ struct resource *r;
++ struct clk *clk;
++ int ret;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock\n");
++ return PTR_ERR(clk);
++ }
++
++ ret = clk_prepare_enable(clk);
++ if (ret)
++ goto err_clk;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_dbg(&pdev->dev, "master allocation failed\n");
++ ret = -ENOMEM;
++ goto err_clk;
++ }
++
++ master->dev.of_node = pdev->dev.of_node;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->min_speed_hz = clk_get_rate(clk) / 128;
++ master->max_speed_hz = clk_get_rate(clk) / 2;
++ master->flags = SPI_MASTER_HALF_DUPLEX;
++ master->setup = rt2880_spi_setup;
++ master->prepare_message = rt2880_spi_prepare_message;
++ master->set_cs = rt2880_spi_set_cs;
++ master->transfer_one = rt2880_spi_transfer_one,
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->master = master;
++ rs->base = base;
++ rs->clk = clk;
++
++ if (atomic_inc_return(&hw_reset_count) == 1)
++ device_reset(&pdev->dev);
++
++ ret = devm_spi_register_master(&pdev->dev, master);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
++ goto err_master;
++ }
++
++ return ret;
++
++err_master:
++ spi_master_put(master);
++ kfree(master);
++err_clk:
++ clk_disable_unprepare(clk);
++
++ return ret;
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable_unprepare(rs->clk);
++ atomic_dec(&hw_reset_count);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_spi_match,
++ },
++ .probe = rt2880_spi_probe,
++ .remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm at gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch
new file mode 100644
index 0000000..339dc5a
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch
@@ -0,0 +1,524 @@
+From 87a5fcd57c577cd94b5b080deb98885077c13a42 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 43/53] spi: add mt7621 support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-mt7621.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 487 insertions(+)
+ create mode 100644 drivers/spi/spi-mt7621.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -539,6 +539,12 @@ config SPI_RT2880
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
++config SPI_MT7621
++ tristate "MediaTek MT7621 SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the MediaTek MT7621 SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp
+ obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
+ obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
+ obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
++obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
+ obj-$(CONFIG_SPI_MXS) += spi-mxs.o
+ obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
+ obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
+--- /dev/null
++++ b/drivers/spi/spi-mt7621.c
+@@ -0,0 +1,483 @@
++/*
++ * spi-mt7621.c -- MediaTek MT7621 SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm at gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg at openwrt.org>
++ * Copyright (C) 2014-2015 Felix Fietkau <nbd at nbd.name>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi at marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/swab.h>
++
++#include <ralink_regs.h>
++
++#define SPI_BPW_MASK(bits) BIT((bits) - 1)
++
++#define DRIVER_NAME "spi-mt7621"
++/* in usec */
++#define RALINK_SPI_WAIT_MAX_LOOP 2000
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++#define MT7621_SPI_TRANS 0x00
++#define SPITRANS_BUSY BIT(16)
++
++#define MT7621_SPI_OPCODE 0x04
++#define MT7621_SPI_DATA0 0x08
++#define MT7621_SPI_DATA4 0x18
++#define SPI_CTL_TX_RX_CNT_MASK 0xff
++#define SPI_CTL_START BIT(8)
++
++#define MT7621_SPI_POLAR 0x38
++#define MT7621_SPI_MASTER 0x28
++#define MT7621_SPI_MOREBUF 0x2c
++#define MT7621_SPI_SPACE 0x3c
++
++#define MT7621_CPHA BIT(5)
++#define MT7621_CPOL BIT(4)
++#define MT7621_LSB_FIRST BIT(3)
++
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
++
++struct mt7621_spi;
++
++struct mt7621_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ unsigned int sys_freq;
++ unsigned int speed;
++ struct clk *clk;
++ spinlock_t lock;
++
++ struct mt7621_spi_ops *ops;
++};
++
++static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static void mt7621_spi_reset(struct mt7621_spi *rs, int duplex)
++{
++ u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
++
++ master |= 7 << 29;
++ master |= 1 << 2;
++ if (duplex)
++ master |= 1 << 10;
++ else
++ master &= ~(1 << 10);
++
++ mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
++}
++
++static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
++{
++ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
++ int cs = spi->chip_select;
++ u32 polar = 0;
++
++ mt7621_spi_reset(rs, cs);
++ if (enable)
++ polar = BIT(cs);
++ mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
++}
++
++static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
++{
++ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
++ u32 rate;
++ u32 reg;
++
++ dev_dbg(&spi->dev, "speed:%u\n", speed);
++
++ rate = DIV_ROUND_UP(rs->sys_freq, speed);
++ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
++
++ if (rate > 4097)
++ return -EINVAL;
++
++ if (rate < 2)
++ rate = 2;
++
++ reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
++ reg &= ~(0xfff << 16);
++ reg |= (rate - 2) << 16;
++ rs->speed = speed;
++
++ reg &= ~MT7621_LSB_FIRST;
++ if (spi->mode & SPI_LSB_FIRST)
++ reg |= MT7621_LSB_FIRST;
++
++ reg &= ~(MT7621_CPHA | MT7621_CPOL);
++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ break;
++ case SPI_MODE_1:
++ reg |= MT7621_CPHA;
++ break;
++ case SPI_MODE_2:
++ reg |= MT7621_CPOL;
++ break;
++ case SPI_MODE_3:
++ reg |= MT7621_CPOL | MT7621_CPHA;
++ break;
++ }
++ mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
++
++ return 0;
++}
++
++static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
++{
++ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
++ int i;
++
++ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
++ u32 status;
++
++ status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
++ if ((status & SPITRANS_BUSY) == 0) {
++ return 0;
++ }
++ cpu_relax();
++ udelay(1);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
++ struct spi_message *m)
++{
++ struct mt7621_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = m->spi;
++ unsigned int speed = spi->max_speed_hz;
++ struct spi_transfer *t = NULL;
++ int status = 0;
++ int i, len = 0;
++ int rx_len = 0;
++ u32 data[9] = { 0 };
++ u32 val;
++
++ mt7621_spi_wait_till_ready(spi);
++
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ const u8 *buf = t->tx_buf;
++
++ if (t->rx_buf)
++ rx_len += t->len;
++
++ if (!buf)
++ continue;
++
++ if (t->speed_hz < speed)
++ speed = t->speed_hz;
++
++ if (WARN_ON(len + t->len > 36)) {
++ status = -EIO;
++ goto msg_done;
++ }
++
++ for (i = 0; i < t->len; i++, len++)
++ data[len / 4] |= buf[i] << (8 * (len & 3));
++ }
++
++ if (WARN_ON(rx_len > 32)) {
++ status = -EIO;
++ goto msg_done;
++ }
++
++ if (mt7621_spi_prepare(spi, speed)) {
++ status = -EIO;
++ goto msg_done;
++ }
++ data[0] = swab32(data[0]);
++ if (len < 4)
++ data[0] >>= (4 - len) * 8;
++
++ for (i = 0; i < len; i += 4)
++ mt7621_spi_write(rs, MT7621_SPI_OPCODE + i, data[i / 4]);
++
++ val = (min_t(int, len, 4) * 8) << 24;
++ if (len > 4)
++ val |= (len - 4) * 8;
++ val |= (rx_len * 8) << 12;
++ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
++
++ mt7621_spi_set_cs(spi, 1);
++
++ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
++ val |= SPI_CTL_START;
++ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
++
++ mt7621_spi_wait_till_ready(spi);
++
++ mt7621_spi_set_cs(spi, 0);
++
++ for (i = 0; i < rx_len; i += 4)
++ data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
++
++ m->actual_length = len + rx_len;
++
++ len = 0;
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ u8 *buf = t->rx_buf;
++
++ if (!buf)
++ continue;
++
++ for (i = 0; i < t->len; i++, len++)
++ buf[i] = data[len / 4] >> (8 * (len & 3));
++ }
++
++msg_done:
++ m->status = status;
++ spi_finalize_current_message(master);
++
++ return 0;
++}
++
++static int mt7621_spi_transfer_full_duplex(struct spi_master *master,
++ struct spi_message *m)
++{
++ struct mt7621_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = m->spi;
++ unsigned int speed = spi->max_speed_hz;
++ struct spi_transfer *t = NULL;
++ int status = 0;
++ int i, len = 0;
++ int rx_len = 0;
++ u32 data[9] = { 0 };
++ u32 val = 0;
++
++ mt7621_spi_wait_till_ready(spi);
++
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ const u8 *buf = t->tx_buf;
++
++ if (t->rx_buf)
++ rx_len += t->len;
++
++ if (!buf)
++ continue;
++
++ if (WARN_ON(len + t->len > 16)) {
++ status = -EIO;
++ goto msg_done;
++ }
++
++ for (i = 0; i < t->len; i++, len++)
++ data[len / 4] |= buf[i] << (8 * (len & 3));
++ if (speed > t->speed_hz)
++ speed = t->speed_hz;
++ }
++
++ if (WARN_ON(rx_len > 16)) {
++ status = -EIO;
++ goto msg_done;
++ }
++
++ if (mt7621_spi_prepare(spi, speed)) {
++ status = -EIO;
++ goto msg_done;
++ }
++
++ for (i = 0; i < len; i += 4)
++ mt7621_spi_write(rs, MT7621_SPI_DATA0 + i, data[i / 4]);
++
++ val |= len * 8;
++ val |= (rx_len * 8) << 12;
++ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
++
++ mt7621_spi_set_cs(spi, 1);
++
++ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
++ val |= SPI_CTL_START;
++ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
++
++ mt7621_spi_wait_till_ready(spi);
++
++ mt7621_spi_set_cs(spi, 0);
++
++ for (i = 0; i < rx_len; i += 4)
++ data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA4 + i);
++
++ m->actual_length = rx_len;
++
++ len = 0;
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ u8 *buf = t->rx_buf;
++
++ if (!buf)
++ continue;
++
++ for (i = 0; i < t->len; i++, len++)
++ buf[i] = data[len / 4] >> (8 * (len & 3));
++ }
++
++msg_done:
++ m->status = status;
++ spi_finalize_current_message(master);
++
++ return 0;
++}
++
++static int mt7621_spi_transfer_one_message(struct spi_master *master,
++ struct spi_message *m)
++{
++ struct spi_device *spi = m->spi;
++ int cs = spi->chip_select;
++
++ if (cs)
++ return mt7621_spi_transfer_full_duplex(master, m);
++ return mt7621_spi_transfer_half_duplex(master, m);
++}
++
++static int mt7621_spi_setup(struct spi_device *spi)
++{
++ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
++
++ if ((spi->max_speed_hz == 0) ||
++ (spi->max_speed_hz > (rs->sys_freq / 2)))
++ spi->max_speed_hz = (rs->sys_freq / 2);
++
++ if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
++ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static const struct of_device_id mt7621_spi_match[] = {
++ { .compatible = "ralink,mt7621-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7621_spi_match);
++
++static int mt7621_spi_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct spi_master *master;
++ struct mt7621_spi *rs;
++ unsigned long flags;
++ void __iomem *base;
++ struct resource *r;
++ int status = 0;
++ struct clk *clk;
++ struct mt7621_spi_ops *ops;
++
++ match = of_match_device(mt7621_spi_match, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++ ops = (struct mt7621_spi_ops *)match->data;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
++ status);
++ return PTR_ERR(clk);
++ }
++
++ status = clk_prepare_enable(clk);
++ if (status)
++ return status;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_info(&pdev->dev, "master allocation failed\n");
++ return -ENOMEM;
++ }
++
++ master->mode_bits = RT2880_SPI_MODE_BITS;
++
++ master->setup = mt7621_spi_setup;
++ master->transfer_one_message = mt7621_spi_transfer_one_message;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->dev.of_node = pdev->dev.of_node;
++ master->num_chipselect = 2;
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->base = base;
++ rs->clk = clk;
++ rs->master = master;
++ rs->sys_freq = clk_get_rate(rs->clk);
++ rs->ops = ops;
++ dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
++ spin_lock_irqsave(&rs->lock, flags);
++
++ device_reset(&pdev->dev);
++
++ mt7621_spi_reset(rs, 0);
++
++ return spi_register_master(master);
++}
++
++static int mt7621_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct mt7621_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable(rs->clk);
++ spi_unregister_master(master);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static struct platform_driver mt7621_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = mt7621_spi_match,
++ },
++ .probe = mt7621_spi_probe,
++ .remove = mt7621_spi_remove,
++};
++
++module_platform_driver(mt7621_spi_driver);
++
++MODULE_DESCRIPTION("MT7621 SPI driver");
++MODULE_AUTHOR("Felix Fietkau <nbd at nbd.name>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.9/0044-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-4.9/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
new file mode 100644
index 0000000..b198acb
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -0,0 +1,507 @@
+From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:52:56 +0100
+Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
+ 4 files changed, 359 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++ region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus at 10000000 {
++ i2c at 900 {
++ compatible = "link,rt3052-i2c";
++ reg = <0x900 0x100>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hwmon at 4b {
++ compatible = "national,lm92";
++ reg = <0x4b>;
++ };
++ };
++};
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -810,6 +810,11 @@ config I2C_RK3X
+ This driver can also be built as a module. If so, the module will
+ be called i2c-rk3x.
+
++config I2C_RALINK
++ tristate "Ralink I2C Controller"
++ depends on RALINK && !SOC_MT7621
++ select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ bool
+ help
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -75,6 +75,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
+ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
+ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
+ obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,435 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu at mediatek.com>
++ * Copyright (C) 2016 Michael Lee <igvtee at gmail.com>
++ *
++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
++ * (C) 2014 Sittisak <sittisaks at hotmail.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#define REG_CONFIG_REG 0x00
++#define REG_CLKDIV_REG 0x04
++#define REG_DEVADDR_REG 0x08
++#define REG_ADDR_REG 0x0C
++#define REG_DATAOUT_REG 0x10
++#define REG_DATAIN_REG 0x14
++#define REG_STATUS_REG 0x18
++#define REG_STARTXFR_REG 0x1C
++#define REG_BYTECNT_REG 0x20
++
++/* REG_CONFIG_REG */
++#define I2C_ADDRLEN_OFFSET 5
++#define I2C_DEVADLEN_OFFSET 2
++#define I2C_ADDRLEN_MASK 0x3
++#define I2C_ADDR_DIS BIT(1)
++#define I2C_DEVADDR_DIS BIT(0)
++#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET)
++#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET)
++#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
++
++/* REG_CLKDIV_REG */
++#define I2C_CLKDIV_MASK 0xffff
++
++/* REG_DEVADDR_REG */
++#define I2C_DEVADDR_MASK 0x7f
++
++/* REG_ADDR_REG */
++#define I2C_ADDR_MASK 0xff
++
++/* REG_STATUS_REG */
++#define I2C_STARTERR BIT(4)
++#define I2C_ACKERR BIT(3)
++#define I2C_DATARDY BIT(2)
++#define I2C_SDOEMPTY BIT(1)
++#define I2C_BUSY BIT(0)
++
++/* REG_STARTXFR_REG */
++#define NOSTOP_CMD BIT(2)
++#define NODATA_CMD BIT(1)
++#define READ_CMD BIT(0)
++
++/* REG_BYTECNT_REG */
++#define BYTECNT_MAX 64
++#define SET_BYTECNT(x) (x - 1)
++
++/* timeout waiting for I2C devices to respond (clock streching) */
++#define TIMEOUT_MS 1000
++#define DELAY_INTERVAL_US 100
++
++struct rt_i2c {
++ void __iomem *base;
++ struct clk *clk;
++ struct device *dev;
++ struct i2c_adapter adap;
++ u32 cur_clk;
++ u32 clk_div;
++ u32 flags;
++};
++
++static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
++{
++ iowrite32(val, i2c->base + reg);
++}
++
++static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
++{
++ return ioread32(i2c->base + reg);
++}
++
++static int poll_down_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++
++ do {
++ if (!(readl_relaxed(addr) & mask))
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
++}
++
++static int rt_i2c_wait_idle(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
++
++ return ret;
++}
++
++static int poll_up_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++ u32 status;
++
++ do {
++ status = readl_relaxed(addr);
++
++ /* check error status */
++ if (status & I2C_STARTERR)
++ return -EAGAIN;
++ else if (status & I2C_ACKERR)
++ return -ENXIO;
++ else if (status & mask)
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return -ETIMEDOUT;
++}
++
++static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
++
++ return ret;
++}
++
++static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
++
++ return ret;
++}
++
++static void rt_i2c_reset(struct rt_i2c *i2c)
++{
++ device_reset(i2c->adap.dev.parent);
++ barrier();
++ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
++}
++
++static void rt_i2c_dump_reg(struct rt_i2c *i2c)
++{
++ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
++ "addr %08x, dataout %08x, datain %08x, " \
++ "status %08x, startxfr %08x, bytecnt %08x\n",
++ rt_i2c_r32(i2c, REG_CONFIG_REG),
++ rt_i2c_r32(i2c, REG_CLKDIV_REG),
++ rt_i2c_r32(i2c, REG_DEVADDR_REG),
++ rt_i2c_r32(i2c, REG_ADDR_REG),
++ rt_i2c_r32(i2c, REG_DATAOUT_REG),
++ rt_i2c_r32(i2c, REG_DATAIN_REG),
++ rt_i2c_r32(i2c, REG_STATUS_REG),
++ rt_i2c_r32(i2c, REG_STARTXFR_REG),
++ rt_i2c_r32(i2c, REG_BYTECNT_REG));
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
++ int num)
++{
++ struct rt_i2c *i2c;
++ struct i2c_msg *pmsg;
++ unsigned char addr;
++ int i, j, ret;
++ u32 cmd;
++
++ i2c = i2c_get_adapdata(adap);
++
++ for (i = 0; i < num; i++) {
++ pmsg = &msgs[i];
++ if (i == (num - 1))
++ cmd = 0;
++ else
++ cmd = NOSTOP_CMD;
++
++ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
++ pmsg->addr, pmsg->len, pmsg->flags,
++ (cmd == 0)? 1 : 0);
++
++ /* wait hardware idle */
++ if ((ret = rt_i2c_wait_idle(i2c)))
++ goto err_timeout;
++
++ if (pmsg->flags & I2C_M_TEN) {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
++ /* 10 bits address */
++ addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
++ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
++ REG_ADDR_REG);
++ } else {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
++ REG_CONFIG_REG);
++ /* 7 bits address */
++ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ }
++
++ /* buffer length */
++ if (pmsg->len == 0)
++ cmd |= NODATA_CMD;
++ else
++ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
++ REG_BYTECNT_REG);
++
++ j = 0;
++ if (pmsg->flags & I2C_M_RD) {
++ cmd |= READ_CMD;
++ /* start transfer */
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ do {
++ /* wait */
++ if ((ret = rt_i2c_wait_rx_done(i2c)))
++ goto err_timeout;
++ /* read data */
++ if (pmsg->len)
++ pmsg->buf[j] = rt_i2c_r32(i2c,
++ REG_DATAIN_REG);
++ j++;
++ } while (j < pmsg->len);
++ } else {
++ do {
++ /* write data */
++ if (pmsg->len)
++ rt_i2c_w32(i2c, pmsg->buf[j],
++ REG_DATAOUT_REG);
++ /* start transfer */
++ if (j == 0) {
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ }
++ /* wait */
++ if ((ret = rt_i2c_wait_tx_done(i2c)))
++ goto err_timeout;
++ j++;
++ } while (j < pmsg->len);
++ }
++ }
++ /* the return value is number of executed messages */
++ ret = i;
++
++ return ret;
++
++err_timeout:
++ rt_i2c_dump_reg(i2c);
++ rt_i2c_reset(i2c);
++ return ret;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++ .master_xfer = rt_i2c_master_xfer,
++ .functionality = rt_i2c_func,
++};
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++ { .compatible = "ralink,rt2880-i2c" },
++ { /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct i2c_adapter_quirks rt_i2c_quirks = {
++ .max_write_len = BYTECNT_MAX,
++ .max_read_len = BYTECNT_MAX,
++};
++
++static int rt_i2c_init(struct rt_i2c *i2c)
++{
++ u32 reg;
++
++ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
++ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
++ (2 * i2c->cur_clk);
++ if (i2c->clk_div < 8)
++ i2c->clk_div = 8;
++ if (i2c->clk_div > I2C_CLKDIV_MASK)
++ i2c->clk_div = I2C_CLKDIV_MASK;
++
++ /* check support combinde/repeated start message */
++ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
++ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
++
++ rt_i2c_reset(i2c);
++
++ return reg;
++}
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct rt_i2c *i2c;
++ struct i2c_adapter *adap;
++ const struct of_device_id *match;
++ int ret, restart;
++
++ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENODEV;
++ }
++
++ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
++ if (!i2c) {
++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++ return -ENOMEM;
++ }
++
++ i2c->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2c->base))
++ return PTR_ERR(i2c->base);
++
++ i2c->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2c->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return -ENODEV;
++ }
++ clk_prepare_enable(i2c->clk);
++ i2c->dev = &pdev->dev;
++
++ if (of_property_read_u32(pdev->dev.of_node,
++ "clock-frequency", &i2c->cur_clk))
++ i2c->cur_clk = 100000;
++
++ adap = &i2c->adap;
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ adap->algo = &rt_i2c_algo;
++ adap->retries = 3;
++ adap->dev.parent = &pdev->dev;
++ i2c_set_adapdata(adap, i2c);
++ adap->dev.of_node = pdev->dev.of_node;
++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++ adap->quirks = &rt_i2c_quirks;
++
++ platform_set_drvdata(pdev, i2c);
++
++ restart = rt_i2c_init(i2c);
++
++ ret = i2c_add_adapter(adap);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "failed to add adapter\n");
++ clk_disable_unprepare(i2c->clk);
++ return ret;
++ }
++
++ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
++ i2c->cur_clk/1000, restart ? "" : "not ");
++
++ return ret;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++ struct rt_i2c *i2c = platform_get_drvdata(pdev);
++
++ i2c_del_adapter(&i2c->adap);
++ clk_disable_unprepare(i2c->clk);
++
++ return 0;
++}
++
++static struct platform_driver rt_i2c_driver = {
++ .probe = rt_i2c_probe,
++ .remove = rt_i2c_remove,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "i2c-ralink",
++ .of_match_table = i2c_rt_dt_ids,
++ },
++};
++
++static int __init i2c_rt_init (void)
++{
++ return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++ platform_driver_unregister(&rt_i2c_driver);
++}
++module_exit(i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu at mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
diff --git a/target/linux/ramips/patches-4.9/0045-i2c-add-mt7621-driver.patch b/target/linux/ramips/patches-4.9/0045-i2c-add-mt7621-driver.patch
new file mode 100644
index 0000000..98ebf01
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0045-i2c-add-mt7621-driver.patch
@@ -0,0 +1,473 @@
+From d5c54ff3d1db0a4348fa04d8e78f3bf6063e3afc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 7 Dec 2015 17:21:27 +0100
+Subject: [PATCH 45/53] i2c: add mt7621 driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-mt7621.c | 303 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 308 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-mt7621.c
+
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -815,6 +815,11 @@ config I2C_RALINK
+ depends on RALINK && !SOC_MT7621
+ select OF_I2C
+
++config I2C_MT7621
++ tristate "MT7621/MT7628 I2C Controller"
++ depends on RALINK && (SOC_MT7620 || SOC_MT7621)
++ select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ bool
+ help
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
+ obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
++obj-$(CONFIG_I2C_MT7621) += i2c-mt7621.o
+ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
+ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
+ obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mt7621.c
+@@ -0,0 +1,433 @@
++/*
++ * drivers/i2c/busses/i2c-mt7621.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu at mediatek.com>
++ * Copyright (C) 2016 Michael Lee <igvtee at gmail.com>
++ *
++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
++ * (C) 2014 Sittisak <sittisaks at hotmail.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#define REG_SM0CFG0 0x08
++#define REG_SM0DOUT 0x10
++#define REG_SM0DIN 0x14
++#define REG_SM0ST 0x18
++#define REG_SM0AUTO 0x1C
++#define REG_SM0CFG1 0x20
++#define REG_SM0CFG2 0x28
++#define REG_SM0CTL0 0x40
++#define REG_SM0CTL1 0x44
++#define REG_SM0D0 0x50
++#define REG_SM0D1 0x54
++#define REG_PINTEN 0x5C
++#define REG_PINTST 0x60
++#define REG_PINTCL 0x64
++
++/* REG_SM0CFG0 */
++#define I2C_DEVADDR_MASK 0x7f
++
++/* REG_SM0ST */
++#define I2C_DATARDY BIT(2)
++#define I2C_SDOEMPTY BIT(1)
++#define I2C_BUSY BIT(0)
++
++/* REG_SM0AUTO */
++#define READ_CMD BIT(0)
++
++/* REG_SM0CFG1 */
++#define BYTECNT_MAX 64
++#define SET_BYTECNT(x) (x - 1)
++
++/* REG_SM0CFG2 */
++#define AUTOMODE_EN BIT(0)
++
++/* REG_SM0CTL0 */
++#define ODRAIN_HIGH_SM0 BIT(31)
++#define VSYNC_SHIFT 28
++#define VSYNC_MASK 0x3
++#define VSYNC_PULSE (0x1 << VSYNC_SHIFT)
++#define VSYNC_RISING (0x2 << VSYNC_SHIFT)
++#define CLK_DIV_SHIFT 16
++#define CLK_DIV_MASK 0xfff
++#define DEG_CNT_SHIFT 8
++#define DEG_CNT_MASK 0xff
++#define WAIT_HIGH BIT(6)
++#define DEG_EN BIT(5)
++#define CS_STATUA BIT(4)
++#define SCL_STATUS BIT(3)
++#define SDA_STATUS BIT(2)
++#define SM0_EN BIT(1)
++#define SCL_STRECH BIT(0)
++
++/* REG_SM0CTL1 */
++#define ACK_SHIFT 16
++#define ACK_MASK 0xff
++#define PGLEN_SHIFT 8
++#define PGLEN_MASK 0x7
++#define SM0_MODE_SHIFT 4
++#define SM0_MODE_MASK 0x7
++#define SM0_MODE_START 0x1
++#define SM0_MODE_WRITE 0x2
++#define SM0_MODE_STOP 0x3
++#define SM0_MODE_READ_NACK 0x4
++#define SM0_MODE_READ_ACK 0x5
++#define SM0_TRI_BUSY BIT(0)
++
++/* timeout waiting for I2C devices to respond (clock streching) */
++#define TIMEOUT_MS 1000
++#define DELAY_INTERVAL_US 100
++
++struct mtk_i2c {
++ void __iomem *base;
++ struct clk *clk;
++ struct device *dev;
++ struct i2c_adapter adap;
++ u32 cur_clk;
++ u32 clk_div;
++ u32 flags;
++};
++
++static void mtk_i2c_w32(struct mtk_i2c *i2c, u32 val, unsigned reg)
++{
++ iowrite32(val, i2c->base + reg);
++}
++
++static u32 mtk_i2c_r32(struct mtk_i2c *i2c, unsigned reg)
++{
++ return ioread32(i2c->base + reg);
++}
++
++static int poll_down_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++
++ do {
++ if (!(readl_relaxed(addr) & mask))
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
++}
++
++static int mtk_i2c_wait_idle(struct mtk_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_down_timeout(i2c->base + REG_SM0ST, I2C_BUSY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
++
++ return ret;
++}
++
++static int poll_up_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++ u32 status;
++
++ do {
++ status = readl_relaxed(addr);
++ if (status & mask)
++ return 0;
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return -ETIMEDOUT;
++}
++
++static int mtk_i2c_wait_rx_done(struct mtk_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_SM0ST, I2C_DATARDY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
++
++ return ret;
++}
++
++static int mtk_i2c_wait_tx_done(struct mtk_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_SM0ST, I2C_SDOEMPTY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
++
++ return ret;
++}
++
++static void mtk_i2c_reset(struct mtk_i2c *i2c)
++{
++ u32 reg;
++ device_reset(i2c->adap.dev.parent);
++ barrier();
++
++ /* ctrl0 */
++ reg = ODRAIN_HIGH_SM0 | VSYNC_PULSE | (i2c->clk_div << CLK_DIV_SHIFT) |
++ WAIT_HIGH | SM0_EN;
++ mtk_i2c_w32(i2c, reg, REG_SM0CTL0);
++
++ /* auto mode */
++ mtk_i2c_w32(i2c, AUTOMODE_EN, REG_SM0CFG2);
++}
++
++static void mtk_i2c_dump_reg(struct mtk_i2c *i2c)
++{
++ dev_dbg(i2c->dev, "cfg0 %08x, dout %08x, din %08x, " \
++ "status %08x, auto %08x, cfg1 %08x, " \
++ "cfg2 %08x, ctl0 %08x, ctl1 %08x\n",
++ mtk_i2c_r32(i2c, REG_SM0CFG0),
++ mtk_i2c_r32(i2c, REG_SM0DOUT),
++ mtk_i2c_r32(i2c, REG_SM0DIN),
++ mtk_i2c_r32(i2c, REG_SM0ST),
++ mtk_i2c_r32(i2c, REG_SM0AUTO),
++ mtk_i2c_r32(i2c, REG_SM0CFG1),
++ mtk_i2c_r32(i2c, REG_SM0CFG2),
++ mtk_i2c_r32(i2c, REG_SM0CTL0),
++ mtk_i2c_r32(i2c, REG_SM0CTL1));
++}
++
++static int mtk_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
++ int num)
++{
++ struct mtk_i2c *i2c;
++ struct i2c_msg *pmsg;
++ int i, j, ret;
++ u32 cmd;
++
++ i2c = i2c_get_adapdata(adap);
++
++ for (i = 0; i < num; i++) {
++ pmsg = &msgs[i];
++ cmd = 0;
++
++ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x\n",
++ pmsg->addr, pmsg->len, pmsg->flags);
++
++ /* wait hardware idle */
++ if ((ret = mtk_i2c_wait_idle(i2c)))
++ goto err_timeout;
++
++ if (pmsg->flags & I2C_M_TEN) {
++ dev_dbg(i2c->dev, "10 bits addr not supported\n");
++ return -EINVAL;
++ } else {
++ /* 7 bits address */
++ mtk_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
++ REG_SM0CFG0);
++ }
++
++ /* buffer length */
++ if (pmsg->len == 0) {
++ dev_dbg(i2c->dev, "length is 0\n");
++ return -EINVAL;
++ } else
++ mtk_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
++ REG_SM0CFG1);
++
++ j = 0;
++ if (pmsg->flags & I2C_M_RD) {
++ cmd |= READ_CMD;
++ /* start transfer */
++ barrier();
++ mtk_i2c_w32(i2c, cmd, REG_SM0AUTO);
++ do {
++ /* wait */
++ if ((ret = mtk_i2c_wait_rx_done(i2c)))
++ goto err_timeout;
++ /* read data */
++ if (pmsg->len)
++ pmsg->buf[j] = mtk_i2c_r32(i2c,
++ REG_SM0DIN);
++ j++;
++ } while (j < pmsg->len);
++ } else {
++ do {
++ /* write data */
++ if (pmsg->len)
++ mtk_i2c_w32(i2c, pmsg->buf[j],
++ REG_SM0DOUT);
++ /* start transfer */
++ if (j == 0) {
++ barrier();
++ mtk_i2c_w32(i2c, cmd, REG_SM0AUTO);
++ }
++ /* wait */
++ if ((ret = mtk_i2c_wait_tx_done(i2c)))
++ goto err_timeout;
++ j++;
++ } while (j < pmsg->len);
++ }
++ }
++ /* the return value is number of executed messages */
++ ret = i;
++
++ return ret;
++
++err_timeout:
++ mtk_i2c_dump_reg(i2c);
++ mtk_i2c_reset(i2c);
++ return ret;
++}
++
++static u32 mtk_i2c_func(struct i2c_adapter *a)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm mtk_i2c_algo = {
++ .master_xfer = mtk_i2c_master_xfer,
++ .functionality = mtk_i2c_func,
++};
++
++static const struct of_device_id i2c_mtk_dt_ids[] = {
++ { .compatible = "mediatek,mt7621-i2c" },
++ { /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_mtk_dt_ids);
++
++static struct i2c_adapter_quirks mtk_i2c_quirks = {
++ .max_write_len = BYTECNT_MAX,
++ .max_read_len = BYTECNT_MAX,
++};
++
++static void mtk_i2c_init(struct mtk_i2c *i2c)
++{
++ i2c->clk_div = clk_get_rate(i2c->clk) / i2c->cur_clk;
++ if (i2c->clk_div > CLK_DIV_MASK)
++ i2c->clk_div = CLK_DIV_MASK;
++
++ mtk_i2c_reset(i2c);
++}
++
++static int mtk_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct mtk_i2c *i2c;
++ struct i2c_adapter *adap;
++ const struct of_device_id *match;
++ int ret;
++
++ match = of_match_device(i2c_mtk_dt_ids, &pdev->dev);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENODEV;
++ }
++
++ i2c = devm_kzalloc(&pdev->dev, sizeof(struct mtk_i2c), GFP_KERNEL);
++ if (!i2c) {
++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++ return -ENOMEM;
++ }
++
++ i2c->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2c->base))
++ return PTR_ERR(i2c->base);
++
++ i2c->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2c->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return -ENODEV;
++ }
++ clk_prepare_enable(i2c->clk);
++ i2c->dev = &pdev->dev;
++
++ if (of_property_read_u32(pdev->dev.of_node,
++ "clock-frequency", &i2c->cur_clk))
++ i2c->cur_clk = 100000;
++
++ adap = &i2c->adap;
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ adap->algo = &mtk_i2c_algo;
++ adap->retries = 3;
++ adap->dev.parent = &pdev->dev;
++ i2c_set_adapdata(adap, i2c);
++ adap->dev.of_node = pdev->dev.of_node;
++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++ adap->quirks = &mtk_i2c_quirks;
++
++ platform_set_drvdata(pdev, i2c);
++
++ mtk_i2c_init(i2c);
++
++ ret = i2c_add_adapter(adap);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "failed to add adapter\n");
++ clk_disable_unprepare(i2c->clk);
++ return ret;
++ }
++
++ dev_info(&pdev->dev, "clock %uKHz, re-start not support\n",
++ i2c->cur_clk/1000);
++
++ return ret;
++}
++
++static int mtk_i2c_remove(struct platform_device *pdev)
++{
++ struct mtk_i2c *i2c = platform_get_drvdata(pdev);
++
++ i2c_del_adapter(&i2c->adap);
++ clk_disable_unprepare(i2c->clk);
++
++ return 0;
++}
++
++static struct platform_driver mtk_i2c_driver = {
++ .probe = mtk_i2c_probe,
++ .remove = mtk_i2c_remove,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "i2c-mt7621",
++ .of_match_table = i2c_mtk_dt_ids,
++ },
++};
++
++static int __init i2c_mtk_init (void)
++{
++ return platform_driver_register(&mtk_i2c_driver);
++}
++subsys_initcall(i2c_mtk_init);
++
++static void __exit i2c_mtk_exit (void)
++{
++ platform_driver_unregister(&mtk_i2c_driver);
++}
++module_exit(i2c_mtk_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu at mediatek.com>");
++MODULE_DESCRIPTION("MT7621 I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:MT7621-I2C");
diff --git a/target/linux/ramips/patches-4.9/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.9/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
new file mode 100644
index 0000000..29ec3b7
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -0,0 +1,4831 @@
+From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 13 Nov 2014 19:08:40 +0100
+Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mmc/host/Kconfig | 2 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/mtk-mmc/Kconfig | 16 +
+ drivers/mmc/host/mtk-mmc/Makefile | 42 +
+ drivers/mmc/host/mtk-mmc/board.h | 137 ++
+ drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
+ drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
+ drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
+ drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
+ 9 files changed, 4762 insertions(+)
+ create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
+ create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
+ create mode 100644 drivers/mmc/host/mtk-mmc/board.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
+
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -798,3 +798,6 @@ config MMC_SDHCI_BRCMSTB
+ Broadcom STB SoCs.
+
+ If unsure, say Y.
++
++source "drivers/mmc/host/mtk-mmc/Kconfig"
++
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for MMC/SD host controller drivers
+ #
+
++obj-$(CONFIG_MTK_MMC) += mtk-mmc/
+ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
+ obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
+ obj-$(CONFIG_MMC_PXA) += pxamci.o
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/Kconfig
+@@ -0,0 +1,16 @@
++config MTK_MMC
++ tristate "MTK SD/MMC"
++ depends on !MTD_NAND_RALINK
++
++config MTK_AEE_KDUMP
++ bool "MTK AEE KDUMP"
++ depends on MTK_MMC
++
++config MTK_MMC_CD_POLL
++ bool "Card Detect with Polling"
++ depends on MTK_MMC
++
++config MTK_MMC_EMMC_8BIT
++ bool "eMMC 8-bit support"
++ depends on MTK_MMC && RALINK_MT7628
++
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/Makefile
+@@ -0,0 +1,42 @@
++# Copyright Statement:
++#
++# This software/firmware and related documentation ("MediaTek Software") are
++# protected under relevant copyright laws. The information contained herein
++# is confidential and proprietary to MediaTek Inc. and/or its licensors.
++# Without the prior written permission of MediaTek inc. and/or its licensors,
++# any reproduction, modification, use or disclosure of MediaTek Software,
++# and information contained herein, in whole or in part, shall be strictly prohibited.
++#
++# MediaTek Inc. (C) 2010. All rights reserved.
++#
++# BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++# THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++# CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++# SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++# STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++# CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++#
++# The following software/firmware and/or related documentation ("MediaTek Software")
++# have been modified by MediaTek Inc. All revisions are subject to any receiver's
++# applicable license agreements with MediaTek Inc.
++
++obj-$(CONFIG_MTK_MMC) += mtk_sd.o
++mtk_sd-objs := sd.o dbg.o
++ifeq ($(CONFIG_MTK_AEE_KDUMP),y)
++EXTRA_CFLAGS += -DMT6575_SD_DEBUG
++endif
++
++clean:
++ @rm -f *.o modules.order .*.cmd
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/board.h
+@@ -0,0 +1,137 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef __ARCH_ARM_MACH_BOARD_H
++#define __ARCH_ARM_MACH_BOARD_H
++
++#include <generated/autoconf.h>
++#include <linux/pm.h>
++/* --- chhung */
++// #include <mach/mt6575.h>
++// #include <board-custom.h>
++/* end of chhung */
++
++typedef void (*sdio_irq_handler_t)(void*); /* external irq handler */
++typedef void (*pm_callback_t)(pm_message_t state, void *data);
++
++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
++#define MSDC_RST_PIN_EN (1 << 2) /* emmc reset pin is wired */
++#define MSDC_SDIO_IRQ (1 << 3) /* use internal sdio irq (bus) */
++#define MSDC_EXT_SDIO_IRQ (1 << 4) /* use external sdio irq */
++#define MSDC_REMOVABLE (1 << 5) /* removable slot */
++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
++#define MSDC_HIGHSPEED (1 << 7) /* high-speed mode support */
++#define MSDC_UHS1 (1 << 8) /* uhs-1 mode support */
++#define MSDC_DDR (1 << 9) /* ddr mode support */
++
++
++#define MSDC_SMPL_RISING (0)
++#define MSDC_SMPL_FALLING (1)
++
++#define MSDC_CMD_PIN (0)
++#define MSDC_DAT_PIN (1)
++#define MSDC_CD_PIN (2)
++#define MSDC_WP_PIN (3)
++#define MSDC_RST_PIN (4)
++
++enum {
++ MSDC_CLKSRC_48MHZ = 0,
++// MSDC_CLKSRC_26MHZ = 0,
++// MSDC_CLKSRC_197MHZ = 1,
++// MSDC_CLKSRC_208MHZ = 2
++};
++
++struct msdc_hw {
++ unsigned char clk_src; /* host clock source */
++ unsigned char cmd_edge; /* command latch edge */
++ unsigned char data_edge; /* data latch edge */
++ unsigned char clk_drv; /* clock pad driving */
++ unsigned char cmd_drv; /* command pad driving */
++ unsigned char dat_drv; /* data pad driving */
++ unsigned long flags; /* hardware capability flags */
++ unsigned long data_pins; /* data pins */
++ unsigned long data_offset; /* data address offset */
++
++ /* config gpio pull mode */
++ void (*config_gpio_pin)(int type, int pull);
++
++ /* external power control for card */
++ void (*ext_power_on)(void);
++ void (*ext_power_off)(void);
++
++ /* external sdio irq operations */
++ void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
++ void (*enable_sdio_eirq)(void);
++ void (*disable_sdio_eirq)(void);
++
++ /* external cd irq operations */
++ void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
++ void (*enable_cd_eirq)(void);
++ void (*disable_cd_eirq)(void);
++ int (*get_cd_status)(void);
++
++ /* power management callback for external module */
++ void (*register_pm)(pm_callback_t pm_cb, void *data);
++};
++
++extern struct msdc_hw msdc0_hw;
++extern struct msdc_hw msdc1_hw;
++extern struct msdc_hw msdc2_hw;
++extern struct msdc_hw msdc3_hw;
++
++/*GPS driver*/
++#define GPS_FLAG_FORCE_OFF 0x0001
++struct mt3326_gps_hardware {
++ int (*ext_power_on)(int);
++ int (*ext_power_off)(int);
++};
++extern struct mt3326_gps_hardware mt3326_gps_hw;
++
++/* NAND driver */
++struct mt6575_nand_host_hw {
++ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
++ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
++ unsigned int nfi_cs_num; /* NFI_CS_NUM */
++ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
++ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
++ unsigned int nand_ecc_size;
++ unsigned int nand_ecc_bytes;
++ unsigned int nand_ecc_mode;
++};
++extern struct mt6575_nand_host_hw mt6575_nand_hw;
++
++#endif /* __ARCH_ARM_MACH_BOARD_H */
++
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/dbg.c
+@@ -0,0 +1,347 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/kthread.h>
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/proc_fs.h>
++#include <linux/string.h>
++#include <linux/uaccess.h>
++// #include <mach/mt6575_gpt.h> /* --- by chhung */
++#include "dbg.h"
++#include "mt6575_sd.h"
++#include <linux/seq_file.h>
++
++static char cmd_buf[256];
++
++/* for debug zone */
++unsigned int sd_debug_zone[4]={
++ 0,
++ 0,
++ 0,
++ 0
++};
++
++/* mode select */
++u32 dma_size[4]={
++ 512,
++ 512,
++ 512,
++ 512
++};
++msdc_mode drv_mode[4]={
++ MODE_SIZE_DEP, /* using DMA or not depend on the size */
++ MODE_SIZE_DEP,
++ MODE_SIZE_DEP,
++ MODE_SIZE_DEP
++};
++
++#if defined (MT6575_SD_DEBUG)
++/* for driver profile */
++#define TICKS_ONE_MS (13000)
++u32 gpt_enable = 0;
++u32 sdio_pro_enable = 0; /* make sure gpt is enabled */
++u32 sdio_pro_time = 0; /* no more than 30s */
++struct sdio_profile sdio_perfomance = {0};
++
++#if 0 /* --- chhung */
++void msdc_init_gpt(void)
++{
++ GPT_CONFIG config;
++
++ config.num = GPT6;
++ config.mode = GPT_FREE_RUN;
++ config.clkSrc = GPT_CLK_SRC_SYS;
++ config.clkDiv = GPT_CLK_DIV_1; /* 13MHz GPT6 */
++
++ if (GPT_Config(config) == FALSE )
++ return;
++
++ GPT_Start(GPT6);
++}
++#endif /* end of --- */
++
++u32 msdc_time_calc(u32 old_L32, u32 old_H32, u32 new_L32, u32 new_H32)
++{
++ u32 ret = 0;
++
++ if (new_H32 == old_H32) {
++ ret = new_L32 - old_L32;
++ } else if(new_H32 == (old_H32 + 1)) {
++ if (new_L32 > old_L32) {
++ printk("msdc old_L<0x%x> new_L<0x%x>\n", old_L32, new_L32);
++ }
++ ret = (0xffffffff - old_L32);
++ ret += new_L32;
++ } else {
++ printk("msdc old_H<0x%x> new_H<0x%x>\n", old_H32, new_H32);
++ }
++
++ return ret;
++}
++
++void msdc_sdio_profile(struct sdio_profile* result)
++{
++ struct cmd_profile* cmd;
++ u32 i;
++
++ printk("sdio === performance dump ===\n");
++ printk("sdio === total execute tick<%d> time<%dms> Tx<%dB> Rx<%dB>\n",
++ result->total_tc, result->total_tc / TICKS_ONE_MS,
++ result->total_tx_bytes, result->total_rx_bytes);
++
++ /* CMD52 Dump */
++ cmd = &result->cmd52_rx;
++ printk("sdio === CMD52 Rx <%d>times tick<%d> Max<%d> Min<%d> Aver<%d>\n", cmd->count, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count);
++ cmd = &result->cmd52_tx;
++ printk("sdio === CMD52 Tx <%d>times tick<%d> Max<%d> Min<%d> Aver<%d>\n", cmd->count, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count);
++
++ /* CMD53 Rx bytes + block mode */
++ for (i=0; i<512; i++) {
++ cmd = &result->cmd53_rx_byte[i];
++ if (cmd->count) {
++ printk("sdio<%6d><%3dB>_Rx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
++ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
++ }
++ }
++ for (i=0; i<100; i++) {
++ cmd = &result->cmd53_rx_blk[i];
++ if (cmd->count) {
++ printk("sdio<%6d><%3d>B_Rx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
++ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
++ }
++ }
++
++ /* CMD53 Tx bytes + block mode */
++ for (i=0; i<512; i++) {
++ cmd = &result->cmd53_tx_byte[i];
++ if (cmd->count) {
++ printk("sdio<%6d><%3dB>_Tx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
++ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
++ }
++ }
++ for (i=0; i<100; i++) {
++ cmd = &result->cmd53_tx_blk[i];
++ if (cmd->count) {
++ printk("sdio<%6d><%3d>B_Tx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
++ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
++ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
++ }
++ }
++
++ printk("sdio === performance dump done ===\n");
++}
++
++//========= sdio command table ===========
++void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks)
++{
++ struct sdio_profile* result = &sdio_perfomance;
++ struct cmd_profile* cmd;
++ u32 block;
++
++ if (sdio_pro_enable == 0) {
++ return;
++ }
++
++ if (opcode == 52) {
++ cmd = bRx ? &result->cmd52_rx : &result->cmd52_tx;
++ } else if (opcode == 53) {
++ if (sizes < 512) {
++ cmd = bRx ? &result->cmd53_rx_byte[sizes] : &result->cmd53_tx_byte[sizes];
++ } else {
++ block = sizes / 512;
++ if (block >= 99) {
++ printk("cmd53 error blocks\n");
++ while(1);
++ }
++ cmd = bRx ? &result->cmd53_rx_blk[block] : &result->cmd53_tx_blk[block];
++ }
++ } else {
++ return;
++ }
++
++ /* update the members */
++ if (ticks > cmd->max_tc){
++ cmd->max_tc = ticks;
++ }
++ if (cmd->min_tc == 0 || ticks < cmd->min_tc) {
++ cmd->min_tc = ticks;
++ }
++ cmd->tot_tc += ticks;
++ cmd->tot_bytes += sizes;
++ cmd->count ++;
++
++ if (bRx) {
++ result->total_rx_bytes += sizes;
++ } else {
++ result->total_tx_bytes += sizes;
++ }
++ result->total_tc += ticks;
++
++ /* dump when total_tc > 30s */
++ if (result->total_tc >= sdio_pro_time * TICKS_ONE_MS * 1000) {
++ msdc_sdio_profile(result);
++ memset(result, 0 , sizeof(struct sdio_profile));
++ }
++}
++
++//========== driver proc interface ===========
++static int msdc_debug_proc_read(struct seq_file *s, void *p)
++{
++ seq_printf(s, "\n=========================================\n");
++ seq_printf(s, "Index<0> + Id + Zone\n");
++ seq_printf(s, "-> PWR<9> WRN<8> | FIO<7> OPS<6> FUN<5> CFG<4> | INT<3> RSP<2> CMD<1> DMA<0>\n");
++ seq_printf(s, "-> echo 0 3 0x3ff >msdc_bebug -> host[3] debug zone set to 0x3ff\n");
++ seq_printf(s, "-> MSDC[0] Zone: 0x%.8x\n", sd_debug_zone[0]);
++ seq_printf(s, "-> MSDC[1] Zone: 0x%.8x\n", sd_debug_zone[1]);
++ seq_printf(s, "-> MSDC[2] Zone: 0x%.8x\n", sd_debug_zone[2]);
++ seq_printf(s, "-> MSDC[3] Zone: 0x%.8x\n", sd_debug_zone[3]);
++
++ seq_printf(s, "Index<1> + ID:4|Mode:4 + DMA_SIZE\n");
++ seq_printf(s, "-> 0)PIO 1)DMA 2)SIZE\n");
++ seq_printf(s, "-> echo 1 22 0x200 >msdc_bebug -> host[2] size mode, dma when >= 512\n");
++ seq_printf(s, "-> MSDC[0] mode<%d> size<%d>\n", drv_mode[0], dma_size[0]);
++ seq_printf(s, "-> MSDC[1] mode<%d> size<%d>\n", drv_mode[1], dma_size[1]);
++ seq_printf(s, "-> MSDC[2] mode<%d> size<%d>\n", drv_mode[2], dma_size[2]);
++ seq_printf(s, "-> MSDC[3] mode<%d> size<%d>\n", drv_mode[3], dma_size[3]);
++
++ seq_printf(s, "Index<3> + SDIO_PROFILE + TIME\n");
++ seq_printf(s, "-> echo 3 1 0x1E >msdc_bebug -> enable sdio_profile, 30s\n");
++ seq_printf(s, "-> SDIO_PROFILE<%d> TIME<%ds>\n", sdio_pro_enable, sdio_pro_time);
++ seq_printf(s, "=========================================\n\n");
++
++ return 0;
++}
++
++static ssize_t msdc_debug_proc_write(struct file *file,
++ const char __user *buf, size_t count, loff_t *data)
++{
++ int ret;
++
++ int cmd, p1, p2;
++ int id, zone;
++ int mode, size;
++
++ if (count == 0)return -1;
++ if(count > 255)count = 255;
++
++ ret = copy_from_user(cmd_buf, buf, count);
++ if (ret < 0)return -1;
++
++ cmd_buf[count] = '\0';
++ printk("msdc Write %s\n", cmd_buf);
++
++ sscanf(cmd_buf, "%x %x %x", &cmd, &p1, &p2);
++
++ if(cmd == SD_TOOL_ZONE) {
++ id = p1; zone = p2; zone &= 0x3ff;
++ printk("msdc host_id<%d> zone<0x%.8x>\n", id, zone);
++ if(id >=0 && id<=3){
++ sd_debug_zone[id] = zone;
++ }
++ else if(id == 4){
++ sd_debug_zone[0] = sd_debug_zone[1] = zone;
++ sd_debug_zone[2] = sd_debug_zone[3] = zone;
++ }
++ else{
++ printk("msdc host_id error when set debug zone\n");
++ }
++ } else if (cmd == SD_TOOL_DMA_SIZE) {
++ id = p1>>4; mode = (p1&0xf); size = p2;
++ if(id >=0 && id<=3){
++ drv_mode[id] = mode;
++ dma_size[id] = p2;
++ }
++ else if(id == 4){
++ drv_mode[0] = drv_mode[1] = mode;
++ drv_mode[2] = drv_mode[3] = mode;
++ dma_size[0] = dma_size[1] = p2;
++ dma_size[2] = dma_size[3] = p2;
++ }
++ else{
++ printk("msdc host_id error when select mode\n");
++ }
++ } else if (cmd == SD_TOOL_SDIO_PROFILE) {
++ if (p1 == 1) { /* enable profile */
++ if (gpt_enable == 0) {
++ // msdc_init_gpt(); /* --- by chhung */
++ gpt_enable = 1;
++ }
++ sdio_pro_enable = 1;
++ if (p2 == 0) p2 = 1; if (p2 >= 30) p2 = 30;
++ sdio_pro_time = p2 ;
++ } else if (p1 == 0) {
++ /* todo */
++ sdio_pro_enable = 0;
++ }
++ }
++
++ return count;
++}
++
++static int msdc_debug_show(struct inode *inode, struct file *file)
++{
++ return single_open(file, msdc_debug_proc_read, NULL);
++}
++
++static const struct file_operations msdc_debug_fops = {
++ .owner = THIS_MODULE,
++ .open = msdc_debug_show,
++ .read = seq_read,
++ .write = msdc_debug_proc_write,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++int msdc_debug_proc_init(void)
++{
++ struct proc_dir_entry *de = proc_create("msdc_debug", 0667, NULL, &msdc_debug_fops);
++
++ if (!de || IS_ERR(de))
++ printk("!! Create MSDC debug PROC fail !!\n");
++
++ return 0 ;
++}
++EXPORT_SYMBOL_GPL(msdc_debug_proc_init);
++#endif
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/dbg.h
+@@ -0,0 +1,156 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++#ifndef __MT_MSDC_DEUBG__
++#define __MT_MSDC_DEUBG__
++
++//==========================
++extern u32 sdio_pro_enable;
++/* for a type command, e.g. CMD53, 2 blocks */
++struct cmd_profile {
++ u32 max_tc; /* Max tick count */
++ u32 min_tc;
++ u32 tot_tc; /* total tick count */
++ u32 tot_bytes;
++ u32 count; /* the counts of the command */
++};
++
++/* dump when total_tc and total_bytes */
++struct sdio_profile {
++ u32 total_tc; /* total tick count of CMD52 and CMD53 */
++ u32 total_tx_bytes; /* total bytes of CMD53 Tx */
++ u32 total_rx_bytes; /* total bytes of CMD53 Rx */
++
++ /*CMD52*/
++ struct cmd_profile cmd52_tx;
++ struct cmd_profile cmd52_rx;
++
++ /*CMD53 in byte unit */
++ struct cmd_profile cmd53_tx_byte[512];
++ struct cmd_profile cmd53_rx_byte[512];
++
++ /*CMD53 in block unit */
++ struct cmd_profile cmd53_tx_blk[100];
++ struct cmd_profile cmd53_rx_blk[100];
++};
++
++//==========================
++typedef enum {
++ SD_TOOL_ZONE = 0,
++ SD_TOOL_DMA_SIZE = 1,
++ SD_TOOL_PM_ENABLE = 2,
++ SD_TOOL_SDIO_PROFILE = 3,
++} msdc_dbg;
++
++typedef enum {
++ MODE_PIO = 0,
++ MODE_DMA = 1,
++ MODE_SIZE_DEP = 2,
++} msdc_mode;
++extern msdc_mode drv_mode[4];
++extern u32 dma_size[4];
++
++/* Debug message event */
++#define DBG_EVT_NONE (0) /* No event */
++#define DBG_EVT_DMA (1 << 0) /* DMA related event */
++#define DBG_EVT_CMD (1 << 1) /* MSDC CMD related event */
++#define DBG_EVT_RSP (1 << 2) /* MSDC CMD RSP related event */
++#define DBG_EVT_INT (1 << 3) /* MSDC INT event */
++#define DBG_EVT_CFG (1 << 4) /* MSDC CFG event */
++#define DBG_EVT_FUC (1 << 5) /* Function event */
++#define DBG_EVT_OPS (1 << 6) /* Read/Write operation event */
++#define DBG_EVT_FIO (1 << 7) /* FIFO operation event */
++#define DBG_EVT_WRN (1 << 8) /* Warning event */
++#define DBG_EVT_PWR (1 << 9) /* Power event */
++#define DBG_EVT_ALL (0xffffffff)
++
++#define DBG_EVT_MASK (DBG_EVT_ALL)
++
++extern unsigned int sd_debug_zone[4];
++#define TAG "msdc"
++#if 0 /* +++ chhung */
++#define BUG_ON(x) \
++do { \
++ if (x) { \
++ printk("[BUG] %s LINE:%d FILE:%s\n", #x, __LINE__, __FILE__); \
++ while(1); \
++ } \
++}while(0)
++#endif /* end of +++ */
++
++#define N_MSG(evt, fmt, args...)
++/*
++do { \
++ if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
++ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
++ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
++ } \
++} while(0)
++*/
++
++#define ERR_MSG(fmt, args...) \
++do { \
++ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
++ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
++} while(0);
++
++#if 1
++//defined CONFIG_MTK_MMC_CD_POLL
++#define INIT_MSG(fmt, args...)
++#define IRQ_MSG(fmt, args...)
++#else
++#define INIT_MSG(fmt, args...) \
++do { \
++ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
++ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
++} while(0);
++
++/* PID in ISR in not corrent */
++#define IRQ_MSG(fmt, args...) \
++do { \
++ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d>\n", \
++ host->id, ##args , __FUNCTION__, __LINE__); \
++} while(0);
++#endif
++
++int msdc_debug_proc_init(void);
++
++#if 0 /* --- chhung */
++void msdc_init_gpt(void);
++extern void GPT_GetCounter64(UINT32 *cntL32, UINT32 *cntH32);
++#endif /* end of --- */
++u32 msdc_time_calc(u32 old_L32, u32 old_H32, u32 new_L32, u32 new_H32);
++void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks);
++
++#endif
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/mt6575_sd.h
+@@ -0,0 +1,1001 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef MT6575_SD_H
++#define MT6575_SD_H
++
++#include <linux/bitops.h>
++#include <linux/mmc/host.h>
++
++// #include <mach/mt6575_reg_base.h> /* --- by chhung */
++
++/*--------------------------------------------------------------------------*/
++/* Common Macro */
++/*--------------------------------------------------------------------------*/
++#define REG_ADDR(x) ((volatile u32*)(base + OFFSET_##x))
++
++/*--------------------------------------------------------------------------*/
++/* Common Definition */
++/*--------------------------------------------------------------------------*/
++#define MSDC_FIFO_SZ (128)
++#define MSDC_FIFO_THD (64) // (128)
++#define MSDC_NUM (4)
++
++#define MSDC_MS (0)
++#define MSDC_SDMMC (1)
++
++#define MSDC_MODE_UNKNOWN (0)
++#define MSDC_MODE_PIO (1)
++#define MSDC_MODE_DMA_BASIC (2)
++#define MSDC_MODE_DMA_DESC (3)
++#define MSDC_MODE_DMA_ENHANCED (4)
++#define MSDC_MODE_MMC_STREAM (5)
++
++#define MSDC_BUS_1BITS (0)
++#define MSDC_BUS_4BITS (1)
++#define MSDC_BUS_8BITS (2)
++
++#define MSDC_BRUST_8B (3)
++#define MSDC_BRUST_16B (4)
++#define MSDC_BRUST_32B (5)
++#define MSDC_BRUST_64B (6)
++
++#define MSDC_PIN_PULL_NONE (0)
++#define MSDC_PIN_PULL_DOWN (1)
++#define MSDC_PIN_PULL_UP (2)
++#define MSDC_PIN_KEEP (3)
++
++#define MSDC_MAX_SCLK (48000000) /* +/- by chhung */
++#define MSDC_MIN_SCLK (260000)
++
++#define MSDC_AUTOCMD12 (0x0001)
++#define MSDC_AUTOCMD23 (0x0002)
++#define MSDC_AUTOCMD19 (0x0003)
++
++#define MSDC_EMMC_BOOTMODE0 (0) /* Pull low CMD mode */
++#define MSDC_EMMC_BOOTMODE1 (1) /* Reset CMD mode */
++
++enum {
++ RESP_NONE = 0,
++ RESP_R1,
++ RESP_R2,
++ RESP_R3,
++ RESP_R4,
++ RESP_R5,
++ RESP_R6,
++ RESP_R7,
++ RESP_R1B
++};
++
++/*--------------------------------------------------------------------------*/
++/* Register Offset */
++/*--------------------------------------------------------------------------*/
++#define OFFSET_MSDC_CFG (0x0)
++#define OFFSET_MSDC_IOCON (0x04)
++#define OFFSET_MSDC_PS (0x08)
++#define OFFSET_MSDC_INT (0x0c)
++#define OFFSET_MSDC_INTEN (0x10)
++#define OFFSET_MSDC_FIFOCS (0x14)
++#define OFFSET_MSDC_TXDATA (0x18)
++#define OFFSET_MSDC_RXDATA (0x1c)
++#define OFFSET_SDC_CFG (0x30)
++#define OFFSET_SDC_CMD (0x34)
++#define OFFSET_SDC_ARG (0x38)
++#define OFFSET_SDC_STS (0x3c)
++#define OFFSET_SDC_RESP0 (0x40)
++#define OFFSET_SDC_RESP1 (0x44)
++#define OFFSET_SDC_RESP2 (0x48)
++#define OFFSET_SDC_RESP3 (0x4c)
++#define OFFSET_SDC_BLK_NUM (0x50)
++#define OFFSET_SDC_CSTS (0x58)
++#define OFFSET_SDC_CSTS_EN (0x5c)
++#define OFFSET_SDC_DCRC_STS (0x60)
++#define OFFSET_EMMC_CFG0 (0x70)
++#define OFFSET_EMMC_CFG1 (0x74)
++#define OFFSET_EMMC_STS (0x78)
++#define OFFSET_EMMC_IOCON (0x7c)
++#define OFFSET_SDC_ACMD_RESP (0x80)
++#define OFFSET_SDC_ACMD19_TRG (0x84)
++#define OFFSET_SDC_ACMD19_STS (0x88)
++#define OFFSET_MSDC_DMA_SA (0x90)
++#define OFFSET_MSDC_DMA_CA (0x94)
++#define OFFSET_MSDC_DMA_CTRL (0x98)
++#define OFFSET_MSDC_DMA_CFG (0x9c)
++#define OFFSET_MSDC_DBG_SEL (0xa0)
++#define OFFSET_MSDC_DBG_OUT (0xa4)
++#define OFFSET_MSDC_PATCH_BIT (0xb0)
++#define OFFSET_MSDC_PATCH_BIT1 (0xb4)
++#define OFFSET_MSDC_PAD_CTL0 (0xe0)
++#define OFFSET_MSDC_PAD_CTL1 (0xe4)
++#define OFFSET_MSDC_PAD_CTL2 (0xe8)
++#define OFFSET_MSDC_PAD_TUNE (0xec)
++#define OFFSET_MSDC_DAT_RDDLY0 (0xf0)
++#define OFFSET_MSDC_DAT_RDDLY1 (0xf4)
++#define OFFSET_MSDC_HW_DBG (0xf8)
++#define OFFSET_MSDC_VERSION (0x100)
++#define OFFSET_MSDC_ECO_VER (0x104)
++
++/*--------------------------------------------------------------------------*/
++/* Register Address */
++/*--------------------------------------------------------------------------*/
++
++/* common register */
++#define MSDC_CFG REG_ADDR(MSDC_CFG)
++#define MSDC_IOCON REG_ADDR(MSDC_IOCON)
++#define MSDC_PS REG_ADDR(MSDC_PS)
++#define MSDC_INT REG_ADDR(MSDC_INT)
++#define MSDC_INTEN REG_ADDR(MSDC_INTEN)
++#define MSDC_FIFOCS REG_ADDR(MSDC_FIFOCS)
++#define MSDC_TXDATA REG_ADDR(MSDC_TXDATA)
++#define MSDC_RXDATA REG_ADDR(MSDC_RXDATA)
++#define MSDC_PATCH_BIT0 REG_ADDR(MSDC_PATCH_BIT)
++
++/* sdmmc register */
++#define SDC_CFG REG_ADDR(SDC_CFG)
++#define SDC_CMD REG_ADDR(SDC_CMD)
++#define SDC_ARG REG_ADDR(SDC_ARG)
++#define SDC_STS REG_ADDR(SDC_STS)
++#define SDC_RESP0 REG_ADDR(SDC_RESP0)
++#define SDC_RESP1 REG_ADDR(SDC_RESP1)
++#define SDC_RESP2 REG_ADDR(SDC_RESP2)
++#define SDC_RESP3 REG_ADDR(SDC_RESP3)
++#define SDC_BLK_NUM REG_ADDR(SDC_BLK_NUM)
++#define SDC_CSTS REG_ADDR(SDC_CSTS)
++#define SDC_CSTS_EN REG_ADDR(SDC_CSTS_EN)
++#define SDC_DCRC_STS REG_ADDR(SDC_DCRC_STS)
++
++/* emmc register*/
++#define EMMC_CFG0 REG_ADDR(EMMC_CFG0)
++#define EMMC_CFG1 REG_ADDR(EMMC_CFG1)
++#define EMMC_STS REG_ADDR(EMMC_STS)
++#define EMMC_IOCON REG_ADDR(EMMC_IOCON)
++
++/* auto command register */
++#define SDC_ACMD_RESP REG_ADDR(SDC_ACMD_RESP)
++#define SDC_ACMD19_TRG REG_ADDR(SDC_ACMD19_TRG)
++#define SDC_ACMD19_STS REG_ADDR(SDC_ACMD19_STS)
++
++/* dma register */
++#define MSDC_DMA_SA REG_ADDR(MSDC_DMA_SA)
++#define MSDC_DMA_CA REG_ADDR(MSDC_DMA_CA)
++#define MSDC_DMA_CTRL REG_ADDR(MSDC_DMA_CTRL)
++#define MSDC_DMA_CFG REG_ADDR(MSDC_DMA_CFG)
++
++/* pad ctrl register */
++#define MSDC_PAD_CTL0 REG_ADDR(MSDC_PAD_CTL0)
++#define MSDC_PAD_CTL1 REG_ADDR(MSDC_PAD_CTL1)
++#define MSDC_PAD_CTL2 REG_ADDR(MSDC_PAD_CTL2)
++
++/* data read delay */
++#define MSDC_DAT_RDDLY0 REG_ADDR(MSDC_DAT_RDDLY0)
++#define MSDC_DAT_RDDLY1 REG_ADDR(MSDC_DAT_RDDLY1)
++
++/* debug register */
++#define MSDC_DBG_SEL REG_ADDR(MSDC_DBG_SEL)
++#define MSDC_DBG_OUT REG_ADDR(MSDC_DBG_OUT)
++
++/* misc register */
++#define MSDC_PATCH_BIT REG_ADDR(MSDC_PATCH_BIT)
++#define MSDC_PATCH_BIT1 REG_ADDR(MSDC_PATCH_BIT1)
++#define MSDC_PAD_TUNE REG_ADDR(MSDC_PAD_TUNE)
++#define MSDC_HW_DBG REG_ADDR(MSDC_HW_DBG)
++#define MSDC_VERSION REG_ADDR(MSDC_VERSION)
++#define MSDC_ECO_VER REG_ADDR(MSDC_ECO_VER) /* ECO Version */
++
++/*--------------------------------------------------------------------------*/
++/* Register Mask */
++/*--------------------------------------------------------------------------*/
++
++/* MSDC_CFG mask */
++#define MSDC_CFG_MODE (0x1 << 0) /* RW */
++#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
++#define MSDC_CFG_RST (0x1 << 2) /* RW */
++#define MSDC_CFG_PIO (0x1 << 3) /* RW */
++#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
++#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
++#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
++#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
++#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
++#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
++
++/* MSDC_IOCON mask */
++#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
++#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
++#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
++#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
++#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
++#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
++#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
++#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
++#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
++#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
++#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
++#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
++#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
++#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
++#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
++
++/* MSDC_PS mask */
++#define MSDC_PS_CDEN (0x1 << 0) /* RW */
++#define MSDC_PS_CDSTS (0x1 << 1) /* R */
++#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
++#define MSDC_PS_DAT (0xff << 16) /* R */
++#define MSDC_PS_CMD (0x1 << 24) /* R */
++#define MSDC_PS_WP (0x1UL<< 31) /* R */
++
++/* MSDC_INT mask */
++#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
++#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
++#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
++#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
++#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
++#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
++#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
++#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
++#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
++#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
++#define MSDC_INT_CSTA (0x1 << 11) /* R */
++#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
++#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
++#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
++#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
++#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
++
++/* MSDC_INTEN mask */
++#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
++#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
++#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
++#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
++#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
++#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
++#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
++#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
++#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
++#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
++#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
++#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
++#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
++#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
++#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
++#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
++
++/* MSDC_FIFOCS mask */
++#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
++#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
++#define MSDC_FIFOCS_CLR (0x1UL<< 31) /* RW */
++
++/* SDC_CFG mask */
++#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
++#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
++#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
++#define SDC_CFG_SDIO (0x1 << 19) /* RW */
++#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
++#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
++#define SDC_CFG_DTOC (0xffUL << 24) /* RW */
++
++/* SDC_CMD mask */
++#define SDC_CMD_OPC (0x3f << 0) /* RW */
++#define SDC_CMD_BRK (0x1 << 6) /* RW */
++#define SDC_CMD_RSPTYP (0x7 << 7) /* RW */
++#define SDC_CMD_DTYP (0x3 << 11) /* RW */
++#define SDC_CMD_DTYP (0x3 << 11) /* RW */
++#define SDC_CMD_RW (0x1 << 13) /* RW */
++#define SDC_CMD_STOP (0x1 << 14) /* RW */
++#define SDC_CMD_GOIRQ (0x1 << 15) /* RW */
++#define SDC_CMD_BLKLEN (0xfff<< 16) /* RW */
++#define SDC_CMD_AUTOCMD (0x3 << 28) /* RW */
++#define SDC_CMD_VOLSWTH (0x1 << 30) /* RW */
++
++/* SDC_STS mask */
++#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
++#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
++#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
++
++/* SDC_DCRC_STS mask */
++#define SDC_DCRC_STS_NEG (0xf << 8) /* RO */
++#define SDC_DCRC_STS_POS (0xff << 0) /* RO */
++
++/* EMMC_CFG0 mask */
++#define EMMC_CFG0_BOOTSTART (0x1 << 0) /* W */
++#define EMMC_CFG0_BOOTSTOP (0x1 << 1) /* W */
++#define EMMC_CFG0_BOOTMODE (0x1 << 2) /* RW */
++#define EMMC_CFG0_BOOTACKDIS (0x1 << 3) /* RW */
++#define EMMC_CFG0_BOOTWDLY (0x7 << 12) /* RW */
++#define EMMC_CFG0_BOOTSUPP (0x1 << 15) /* RW */
++
++/* EMMC_CFG1 mask */
++#define EMMC_CFG1_BOOTDATTMC (0xfffff << 0) /* RW */
++#define EMMC_CFG1_BOOTACKTMC (0xfffUL << 20) /* RW */
++
++/* EMMC_STS mask */
++#define EMMC_STS_BOOTCRCERR (0x1 << 0) /* W1C */
++#define EMMC_STS_BOOTACKERR (0x1 << 1) /* W1C */
++#define EMMC_STS_BOOTDATTMO (0x1 << 2) /* W1C */
++#define EMMC_STS_BOOTACKTMO (0x1 << 3) /* W1C */
++#define EMMC_STS_BOOTUPSTATE (0x1 << 4) /* R */
++#define EMMC_STS_BOOTACKRCV (0x1 << 5) /* W1C */
++#define EMMC_STS_BOOTDATRCV (0x1 << 6) /* R */
++
++/* EMMC_IOCON mask */
++#define EMMC_IOCON_BOOTRST (0x1 << 0) /* RW */
++
++/* SDC_ACMD19_TRG mask */
++#define SDC_ACMD19_TRG_TUNESEL (0xf << 0) /* RW */
++
++/* MSDC_DMA_CTRL mask */
++#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
++#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
++#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
++#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
++#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
++#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
++#define MSDC_DMA_CTRL_XFERSZ (0xffffUL << 16)/* RW */
++
++/* MSDC_DMA_CFG mask */
++#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
++#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
++#define MSDC_DMA_CFG_BDCSERR (0x1 << 4) /* R */
++#define MSDC_DMA_CFG_GPDCSERR (0x1 << 5) /* R */
++
++/* MSDC_PATCH_BIT mask */
++#define MSDC_PATCH_BIT_WFLSMODE (0x1 << 0) /* RW */
++#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
++#define MSDC_PATCH_BIT_CKGEN_CK (0x1 << 6) /* E2: Fixed to 1 */
++#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
++#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
++#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
++#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
++#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
++#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
++#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
++#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
++#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
++
++/* MSDC_PATCH_BIT1 mask */
++#define MSDC_PATCH_BIT1_WRDAT_CRCS (0x7 << 3)
++#define MSDC_PATCH_BIT1_CMD_RSP (0x7 << 0)
++
++/* MSDC_PAD_CTL0 mask */
++#define MSDC_PAD_CTL0_CLKDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL0_CLKDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL0_CLKSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL0_CLKPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL0_CLKPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL0_CLKSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL0_CLKIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL0_CLKTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL0_CLKRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_CTL1 mask */
++#define MSDC_PAD_CTL1_CMDDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL1_CMDDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL1_CMDSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL1_CMDPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL1_CMDPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL1_CMDSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL1_CMDIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL1_CMDTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL1_CMDRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_CTL2 mask */
++#define MSDC_PAD_CTL2_DATDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL2_DATDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL2_DATSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL2_DATPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL2_DATPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL2_DATIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL2_DATSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL2_DATTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL2_DATRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_TUNE mask */
++#define MSDC_PAD_TUNE_DATWRDLY (0x1F << 0) /* RW */
++#define MSDC_PAD_TUNE_DATRRDLY (0x1F << 8) /* RW */
++#define MSDC_PAD_TUNE_CMDRDLY (0x1F << 16) /* RW */
++#define MSDC_PAD_TUNE_CMDRRDLY (0x1FUL << 22) /* RW */
++#define MSDC_PAD_TUNE_CLKTXDLY (0x1FUL << 27) /* RW */
++
++/* MSDC_DAT_RDDLY0/1 mask */
++#define MSDC_DAT_RDDLY0_D0 (0x1F << 0) /* RW */
++#define MSDC_DAT_RDDLY0_D1 (0x1F << 8) /* RW */
++#define MSDC_DAT_RDDLY0_D2 (0x1F << 16) /* RW */
++#define MSDC_DAT_RDDLY0_D3 (0x1F << 24) /* RW */
++
++#define MSDC_DAT_RDDLY1_D4 (0x1F << 0) /* RW */
++#define MSDC_DAT_RDDLY1_D5 (0x1F << 8) /* RW */
++#define MSDC_DAT_RDDLY1_D6 (0x1F << 16) /* RW */
++#define MSDC_DAT_RDDLY1_D7 (0x1F << 24) /* RW */
++
++#define MSDC_CKGEN_MSDC_DLY_SEL (0x1F<<10)
++#define MSDC_INT_DAT_LATCH_CK_SEL (0x7<<7)
++#define MSDC_CKGEN_MSDC_CK_SEL (0x1<<6)
++#define CARD_READY_FOR_DATA (1<<8)
++#define CARD_CURRENT_STATE(x) ((x&0x00001E00)>>9)
++
++/*--------------------------------------------------------------------------*/
++/* Descriptor Structure */
++/*--------------------------------------------------------------------------*/
++typedef struct {
++ u32 hwo:1; /* could be changed by hw */
++ u32 bdp:1;
++ u32 rsv0:6;
++ u32 chksum:8;
++ u32 intr:1;
++ u32 rsv1:15;
++ void *next;
++ void *ptr;
++ u32 buflen:16;
++ u32 extlen:8;
++ u32 rsv2:8;
++ u32 arg;
++ u32 blknum;
++ u32 cmd;
++} gpd_t;
++
++typedef struct {
++ u32 eol:1;
++ u32 rsv0:7;
++ u32 chksum:8;
++ u32 rsv1:1;
++ u32 blkpad:1;
++ u32 dwpad:1;
++ u32 rsv2:13;
++ void *next;
++ void *ptr;
++ u32 buflen:16;
++ u32 rsv3:16;
++} bd_t;
++
++/*--------------------------------------------------------------------------*/
++/* Register Debugging Structure */
++/*--------------------------------------------------------------------------*/
++
++typedef struct {
++ u32 msdc:1;
++ u32 ckpwn:1;
++ u32 rst:1;
++ u32 pio:1;
++ u32 ckdrven:1;
++ u32 start18v:1;
++ u32 pass18v:1;
++ u32 ckstb:1;
++ u32 ckdiv:8;
++ u32 ckmod:2;
++ u32 pad:14;
++} msdc_cfg_reg;
++typedef struct {
++ u32 sdr104cksel:1;
++ u32 rsmpl:1;
++ u32 dsmpl:1;
++ u32 ddlysel:1;
++ u32 ddr50ckd:1;
++ u32 dsplsel:1;
++ u32 pad1:10;
++ u32 d0spl:1;
++ u32 d1spl:1;
++ u32 d2spl:1;
++ u32 d3spl:1;
++ u32 d4spl:1;
++ u32 d5spl:1;
++ u32 d6spl:1;
++ u32 d7spl:1;
++ u32 riscsz:1;
++ u32 pad2:7;
++} msdc_iocon_reg;
++typedef struct {
++ u32 cden:1;
++ u32 cdsts:1;
++ u32 pad1:10;
++ u32 cddebounce:4;
++ u32 dat:8;
++ u32 cmd:1;
++ u32 pad2:6;
++ u32 wp:1;
++} msdc_ps_reg;
++typedef struct {
++ u32 mmcirq:1;
++ u32 cdsc:1;
++ u32 pad1:1;
++ u32 atocmdrdy:1;
++ u32 atocmdtmo:1;
++ u32 atocmdcrc:1;
++ u32 dmaqempty:1;
++ u32 sdioirq:1;
++ u32 cmdrdy:1;
++ u32 cmdtmo:1;
++ u32 rspcrc:1;
++ u32 csta:1;
++ u32 xfercomp:1;
++ u32 dxferdone:1;
++ u32 dattmo:1;
++ u32 datcrc:1;
++ u32 atocmd19done:1;
++ u32 pad2:15;
++} msdc_int_reg;
++typedef struct {
++ u32 mmcirq:1;
++ u32 cdsc:1;
++ u32 pad1:1;
++ u32 atocmdrdy:1;
++ u32 atocmdtmo:1;
++ u32 atocmdcrc:1;
++ u32 dmaqempty:1;
++ u32 sdioirq:1;
++ u32 cmdrdy:1;
++ u32 cmdtmo:1;
++ u32 rspcrc:1;
++ u32 csta:1;
++ u32 xfercomp:1;
++ u32 dxferdone:1;
++ u32 dattmo:1;
++ u32 datcrc:1;
++ u32 atocmd19done:1;
++ u32 pad2:15;
++} msdc_inten_reg;
++typedef struct {
++ u32 rxcnt:8;
++ u32 pad1:8;
++ u32 txcnt:8;
++ u32 pad2:7;
++ u32 clr:1;
++} msdc_fifocs_reg;
++typedef struct {
++ u32 val;
++} msdc_txdat_reg;
++typedef struct {
++ u32 val;
++} msdc_rxdat_reg;
++typedef struct {
++ u32 sdiowkup:1;
++ u32 inswkup:1;
++ u32 pad1:14;
++ u32 buswidth:2;
++ u32 pad2:1;
++ u32 sdio:1;
++ u32 sdioide:1;
++ u32 intblkgap:1;
++ u32 pad4:2;
++ u32 dtoc:8;
++} sdc_cfg_reg;
++typedef struct {
++ u32 cmd:6;
++ u32 brk:1;
++ u32 rsptyp:3;
++ u32 pad1:1;
++ u32 dtype:2;
++ u32 rw:1;
++ u32 stop:1;
++ u32 goirq:1;
++ u32 blklen:12;
++ u32 atocmd:2;
++ u32 volswth:1;
++ u32 pad2:1;
++} sdc_cmd_reg;
++typedef struct {
++ u32 arg;
++} sdc_arg_reg;
++typedef struct {
++ u32 sdcbusy:1;
++ u32 cmdbusy:1;
++ u32 pad:29;
++ u32 swrcmpl:1;
++} sdc_sts_reg;
++typedef struct {
++ u32 val;
++} sdc_resp0_reg;
++typedef struct {
++ u32 val;
++} sdc_resp1_reg;
++typedef struct {
++ u32 val;
++} sdc_resp2_reg;
++typedef struct {
++ u32 val;
++} sdc_resp3_reg;
++typedef struct {
++ u32 num;
++} sdc_blknum_reg;
++typedef struct {
++ u32 sts;
++} sdc_csts_reg;
++typedef struct {
++ u32 sts;
++} sdc_cstsen_reg;
++typedef struct {
++ u32 datcrcsts:8;
++ u32 ddrcrcsts:4;
++ u32 pad:20;
++} sdc_datcrcsts_reg;
++typedef struct {
++ u32 bootstart:1;
++ u32 bootstop:1;
++ u32 bootmode:1;
++ u32 pad1:9;
++ u32 bootwaidly:3;
++ u32 bootsupp:1;
++ u32 pad2:16;
++} emmc_cfg0_reg;
++typedef struct {
++ u32 bootcrctmc:16;
++ u32 pad:4;
++ u32 bootacktmc:12;
++} emmc_cfg1_reg;
++typedef struct {
++ u32 bootcrcerr:1;
++ u32 bootackerr:1;
++ u32 bootdattmo:1;
++ u32 bootacktmo:1;
++ u32 bootupstate:1;
++ u32 bootackrcv:1;
++ u32 bootdatrcv:1;
++ u32 pad:25;
++} emmc_sts_reg;
++typedef struct {
++ u32 bootrst:1;
++ u32 pad:31;
++} emmc_iocon_reg;
++typedef struct {
++ u32 val;
++} msdc_acmd_resp_reg;
++typedef struct {
++ u32 tunesel:4;
++ u32 pad:28;
++} msdc_acmd19_trg_reg;
++typedef struct {
++ u32 val;
++} msdc_acmd19_sts_reg;
++typedef struct {
++ u32 addr;
++} msdc_dma_sa_reg;
++typedef struct {
++ u32 addr;
++} msdc_dma_ca_reg;
++typedef struct {
++ u32 start:1;
++ u32 stop:1;
++ u32 resume:1;
++ u32 pad1:5;
++ u32 mode:1;
++ u32 pad2:1;
++ u32 lastbuf:1;
++ u32 pad3:1;
++ u32 brustsz:3;
++ u32 pad4:1;
++ u32 xfersz:16;
++} msdc_dma_ctrl_reg;
++typedef struct {
++ u32 status:1;
++ u32 decsen:1;
++ u32 pad1:2;
++ u32 bdcsen:1;
++ u32 gpdcsen:1;
++ u32 pad2:26;
++} msdc_dma_cfg_reg;
++typedef struct {
++ u32 sel:16;
++ u32 pad2:16;
++} msdc_dbg_sel_reg;
++typedef struct {
++ u32 val;
++} msdc_dbg_out_reg;
++typedef struct {
++ u32 clkdrvn:3;
++ u32 rsv0:1;
++ u32 clkdrvp:3;
++ u32 rsv1:1;
++ u32 clksr:1;
++ u32 rsv2:7;
++ u32 clkpd:1;
++ u32 clkpu:1;
++ u32 clksmt:1;
++ u32 clkies:1;
++ u32 clktdsel:4;
++ u32 clkrdsel:8;
++} msdc_pad_ctl0_reg;
++typedef struct {
++ u32 cmddrvn:3;
++ u32 rsv0:1;
++ u32 cmddrvp:3;
++ u32 rsv1:1;
++ u32 cmdsr:1;
++ u32 rsv2:7;
++ u32 cmdpd:1;
++ u32 cmdpu:1;
++ u32 cmdsmt:1;
++ u32 cmdies:1;
++ u32 cmdtdsel:4;
++ u32 cmdrdsel:8;
++} msdc_pad_ctl1_reg;
++typedef struct {
++ u32 datdrvn:3;
++ u32 rsv0:1;
++ u32 datdrvp:3;
++ u32 rsv1:1;
++ u32 datsr:1;
++ u32 rsv2:7;
++ u32 datpd:1;
++ u32 datpu:1;
++ u32 datsmt:1;
++ u32 daties:1;
++ u32 dattdsel:4;
++ u32 datrdsel:8;
++} msdc_pad_ctl2_reg;
++typedef struct {
++ u32 wrrxdly:3;
++ u32 pad1:5;
++ u32 rdrxdly:8;
++ u32 pad2:16;
++} msdc_pad_tune_reg;
++typedef struct {
++ u32 dat0:5;
++ u32 rsv0:3;
++ u32 dat1:5;
++ u32 rsv1:3;
++ u32 dat2:5;
++ u32 rsv2:3;
++ u32 dat3:5;
++ u32 rsv3:3;
++} msdc_dat_rddly0;
++typedef struct {
++ u32 dat4:5;
++ u32 rsv4:3;
++ u32 dat5:5;
++ u32 rsv5:3;
++ u32 dat6:5;
++ u32 rsv6:3;
++ u32 dat7:5;
++ u32 rsv7:3;
++} msdc_dat_rddly1;
++typedef struct {
++ u32 dbg0sel:8;
++ u32 dbg1sel:6;
++ u32 pad1:2;
++ u32 dbg2sel:6;
++ u32 pad2:2;
++ u32 dbg3sel:6;
++ u32 pad3:2;
++} msdc_hw_dbg_reg;
++typedef struct {
++ u32 val;
++} msdc_version_reg;
++typedef struct {
++ u32 val;
++} msdc_eco_ver_reg;
++
++struct msdc_regs {
++ msdc_cfg_reg msdc_cfg; /* base+0x00h */
++ msdc_iocon_reg msdc_iocon; /* base+0x04h */
++ msdc_ps_reg msdc_ps; /* base+0x08h */
++ msdc_int_reg msdc_int; /* base+0x0ch */
++ msdc_inten_reg msdc_inten; /* base+0x10h */
++ msdc_fifocs_reg msdc_fifocs; /* base+0x14h */
++ msdc_txdat_reg msdc_txdat; /* base+0x18h */
++ msdc_rxdat_reg msdc_rxdat; /* base+0x1ch */
++ u32 rsv1[4];
++ sdc_cfg_reg sdc_cfg; /* base+0x30h */
++ sdc_cmd_reg sdc_cmd; /* base+0x34h */
++ sdc_arg_reg sdc_arg; /* base+0x38h */
++ sdc_sts_reg sdc_sts; /* base+0x3ch */
++ sdc_resp0_reg sdc_resp0; /* base+0x40h */
++ sdc_resp1_reg sdc_resp1; /* base+0x44h */
++ sdc_resp2_reg sdc_resp2; /* base+0x48h */
++ sdc_resp3_reg sdc_resp3; /* base+0x4ch */
++ sdc_blknum_reg sdc_blknum; /* base+0x50h */
++ u32 rsv2[1];
++ sdc_csts_reg sdc_csts; /* base+0x58h */
++ sdc_cstsen_reg sdc_cstsen; /* base+0x5ch */
++ sdc_datcrcsts_reg sdc_dcrcsta; /* base+0x60h */
++ u32 rsv3[3];
++ emmc_cfg0_reg emmc_cfg0; /* base+0x70h */
++ emmc_cfg1_reg emmc_cfg1; /* base+0x74h */
++ emmc_sts_reg emmc_sts; /* base+0x78h */
++ emmc_iocon_reg emmc_iocon; /* base+0x7ch */
++ msdc_acmd_resp_reg acmd_resp; /* base+0x80h */
++ msdc_acmd19_trg_reg acmd19_trg; /* base+0x84h */
++ msdc_acmd19_sts_reg acmd19_sts; /* base+0x88h */
++ u32 rsv4[1];
++ msdc_dma_sa_reg dma_sa; /* base+0x90h */
++ msdc_dma_ca_reg dma_ca; /* base+0x94h */
++ msdc_dma_ctrl_reg dma_ctrl; /* base+0x98h */
++ msdc_dma_cfg_reg dma_cfg; /* base+0x9ch */
++ msdc_dbg_sel_reg dbg_sel; /* base+0xa0h */
++ msdc_dbg_out_reg dbg_out; /* base+0xa4h */
++ u32 rsv5[2];
++ u32 patch0; /* base+0xb0h */
++ u32 patch1; /* base+0xb4h */
++ u32 rsv6[10];
++ msdc_pad_ctl0_reg pad_ctl0; /* base+0xe0h */
++ msdc_pad_ctl1_reg pad_ctl1; /* base+0xe4h */
++ msdc_pad_ctl2_reg pad_ctl2; /* base+0xe8h */
++ msdc_pad_tune_reg pad_tune; /* base+0xech */
++ msdc_dat_rddly0 dat_rddly0; /* base+0xf0h */
++ msdc_dat_rddly1 dat_rddly1; /* base+0xf4h */
++ msdc_hw_dbg_reg hw_dbg; /* base+0xf8h */
++ u32 rsv7[1];
++ msdc_version_reg version; /* base+0x100h */
++ msdc_eco_ver_reg eco_ver; /* base+0x104h */
++};
++
++struct scatterlist_ex {
++ u32 cmd;
++ u32 arg;
++ u32 sglen;
++ struct scatterlist *sg;
++};
++
++#define DMA_FLAG_NONE (0x00000000)
++#define DMA_FLAG_EN_CHKSUM (0x00000001)
++#define DMA_FLAG_PAD_BLOCK (0x00000002)
++#define DMA_FLAG_PAD_DWORD (0x00000004)
++
++struct msdc_dma {
++ u32 flags; /* flags */
++ u32 xfersz; /* xfer size in bytes */
++ u32 sglen; /* size of scatter list */
++ u32 blklen; /* block size */
++ struct scatterlist *sg; /* I/O scatter list */
++ struct scatterlist_ex *esg; /* extended I/O scatter list */
++ u8 mode; /* dma mode */
++ u8 burstsz; /* burst size */
++ u8 intr; /* dma done interrupt */
++ u8 padding; /* padding */
++ u32 cmd; /* enhanced mode command */
++ u32 arg; /* enhanced mode arg */
++ u32 rsp; /* enhanced mode command response */
++ u32 autorsp; /* auto command response */
++
++ gpd_t *gpd; /* pointer to gpd array */
++ bd_t *bd; /* pointer to bd array */
++ dma_addr_t gpd_addr; /* the physical address of gpd array */
++ dma_addr_t bd_addr; /* the physical address of bd array */
++ u32 used_gpd; /* the number of used gpd elements */
++ u32 used_bd; /* the number of used bd elements */
++};
++
++struct msdc_host
++{
++ struct msdc_hw *hw;
++
++ struct mmc_host *mmc; /* mmc structure */
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ struct mmc_request *mrq;
++ int cmd_rsp;
++ int cmd_rsp_done;
++ int cmd_r1b_done;
++
++ int error;
++ spinlock_t lock; /* mutex */
++ struct semaphore sem;
++
++ u32 blksz; /* host block size */
++ u32 base; /* host base address */
++ int id; /* host id */
++ int pwr_ref; /* core power reference count */
++
++ u32 xfer_size; /* total transferred size */
++
++ struct msdc_dma dma; /* dma channel */
++ u32 dma_addr; /* dma transfer address */
++ u32 dma_left_size; /* dma transfer left size */
++ u32 dma_xfer_size; /* dma transfer size in bytes */
++ int dma_xfer; /* dma transfer mode */
++
++ u32 timeout_ns; /* data timeout ns */
++ u32 timeout_clks; /* data timeout clks */
++
++ atomic_t abort; /* abort transfer */
++
++ int irq; /* host interrupt */
++
++ struct tasklet_struct card_tasklet;
++#if 0
++ struct work_struct card_workqueue;
++#else
++ struct delayed_work card_delaywork;
++#endif
++
++ struct completion cmd_done;
++ struct completion xfer_done;
++ struct pm_message pm_state;
++
++ u32 mclk; /* mmc subsystem clock */
++ u32 hclk; /* host clock speed */
++ u32 sclk; /* SD/MS clock speed */
++ u8 core_clkon; /* Host core clock on ? */
++ u8 card_clkon; /* Card clock on ? */
++ u8 core_power; /* core power */
++ u8 power_mode; /* host power mode */
++ u8 card_inserted; /* card inserted ? */
++ u8 suspend; /* host suspended ? */
++ u8 reserved;
++ u8 app_cmd; /* for app command */
++ u32 app_cmd_arg;
++ u64 starttime;
++};
++
++static inline unsigned int uffs(unsigned int x)
++{
++ unsigned int r = 1;
++
++ if (!x)
++ return 0;
++ if (!(x & 0xffff)) {
++ x >>= 16;
++ r += 16;
++ }
++ if (!(x & 0xff)) {
++ x >>= 8;
++ r += 8;
++ }
++ if (!(x & 0xf)) {
++ x >>= 4;
++ r += 4;
++ }
++ if (!(x & 3)) {
++ x >>= 2;
++ r += 2;
++ }
++ if (!(x & 1)) {
++ x >>= 1;
++ r += 1;
++ }
++ return r;
++}
++#define sdr_read8(reg) __raw_readb(reg)
++#define sdr_read16(reg) __raw_readw(reg)
++#define sdr_read32(reg) __raw_readl(reg)
++#define sdr_write8(reg,val) __raw_writeb(val,reg)
++#define sdr_write16(reg,val) __raw_writew(val,reg)
++#define sdr_write32(reg,val) __raw_writel(val,reg)
++
++#define sdr_set_bits(reg,bs) ((*(volatile u32*)(reg)) |= (u32)(bs))
++#define sdr_clr_bits(reg,bs) ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
++
++#define sdr_set_field(reg,field,val) \
++ do { \
++ volatile unsigned int tv = sdr_read32(reg); \
++ tv &= ~(field); \
++ tv |= ((val) << (uffs((unsigned int)field) - 1)); \
++ sdr_write32(reg,tv); \
++ } while(0)
++#define sdr_get_field(reg,field,val) \
++ do { \
++ volatile unsigned int tv = sdr_read32(reg); \
++ val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
++ } while(0)
++
++#endif
++
+--- /dev/null
++++ b/drivers/mmc/host/mtk-mmc/sd.c
+@@ -0,0 +1,3067 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/timer.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/blkdev.h>
++#include <linux/slab.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/core.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/sdio.h>
++#include <linux/dma-mapping.h>
++
++/* +++ by chhung */
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/pm.h>
++#include <linux/of.h>
++
++#define MSDC_SMPL_FALLING (1)
++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
++#define MSDC_REMOVABLE (1 << 5) /* removable slot */
++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
++#define MSDC_HIGHSPEED (1 << 7)
++
++//#define IRQ_SDC 14 //MT7620 /*FIXME*/
++#ifdef CONFIG_SOC_MT7621
++#define RALINK_SYSCTL_BASE 0xbe000000
++#define RALINK_MSDC_BASE 0xbe130000
++#else
++#define RALINK_SYSCTL_BASE 0xb0000000
++#define RALINK_MSDC_BASE 0xb0130000
++#endif
++#define IRQ_SDC 22 /*FIXME*/
++
++#include <asm/dma.h>
++/* end of +++ */
++
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#if 0 /* --- by chhung */
++#include <mach/board.h>
++#include <mach/mt6575_devs.h>
++#include <mach/mt6575_typedefs.h>
++#include <mach/mt6575_clock_manager.h>
++#include <mach/mt6575_pm_ldo.h>
++//#include <mach/mt6575_pll.h>
++//#include <mach/mt6575_gpio.h>
++//#include <mach/mt6575_gpt_sw.h>
++#include <asm/tcm.h>
++// #include <mach/mt6575_gpt.h>
++#endif /* end of --- */
++
++#include "mt6575_sd.h"
++#include "dbg.h"
++
++/* +++ by chhung */
++#include "board.h"
++/* end of +++ */
++
++#if 0 /* --- by chhung */
++#define isb() __asm__ __volatile__ ("" : : : "memory")
++#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
++ : : "r" (0) : "memory")
++#define dmb() __asm__ __volatile__ ("" : : : "memory")
++#endif /* end of --- */
++
++#define DRV_NAME "mtk-sd"
++
++#define HOST_MAX_NUM (1) /* +/- by chhung */
++
++#if defined (CONFIG_SOC_MT7620)
++#define HOST_MAX_MCLK (48000000) /* +/- by chhung */
++#elif defined (CONFIG_SOC_MT7621)
++#define HOST_MAX_MCLK (50000000) /* +/- by chhung */
++#endif
++#define HOST_MIN_MCLK (260000)
++
++#define HOST_MAX_BLKSZ (2048)
++
++#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
++
++#define GPIO_PULL_DOWN (0)
++#define GPIO_PULL_UP (1)
++
++#if 0 /* --- by chhung */
++#define MSDC_CLKSRC_REG (0xf100000C)
++#define PDN_REG (0xF1000010)
++#endif /* end of --- */
++
++#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
++#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
++
++#define CMD_TIMEOUT (HZ/10) /* 100ms */
++#define DAT_TIMEOUT (HZ/2 * 5) /* 500ms x5 */
++
++#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/
++
++#define MAX_GPD_NUM (1 + 1) /* one null gpd */
++#define MAX_BD_NUM (1024)
++#define MAX_BD_PER_GPD (MAX_BD_NUM)
++
++#define MAX_HW_SGMTS (MAX_BD_NUM)
++#define MAX_PHY_SGMTS (MAX_BD_NUM)
++#define MAX_SGMT_SZ (MAX_DMA_CNT)
++#define MAX_REQ_SZ (MAX_SGMT_SZ * 8)
++
++#ifdef MT6575_SD_DEBUG
++static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
++#endif
++
++static int mtk_sw_poll;
++
++static int cd_active_low = 1;
++
++//=================================
++#define PERI_MSDC0_PDN (15)
++//#define PERI_MSDC1_PDN (16)
++//#define PERI_MSDC2_PDN (17)
++//#define PERI_MSDC3_PDN (18)
++
++struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
++#if 0 /* --- by chhung */
++/* gate means clock power down */
++static int g_clk_gate = 0;
++#define msdc_gate_clock(id) \
++ do { \
++ g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN)); \
++ } while(0)
++/* not like power down register. 1 means clock on. */
++#define msdc_ungate_clock(id) \
++ do { \
++ g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN); \
++ } while(0)
++
++// do we need sync object or not
++void msdc_clk_status(int * status)
++{
++ *status = g_clk_gate;
++}
++#endif /* end of --- */
++
++/* +++ by chhung */
++struct msdc_hw msdc0_hw = {
++ .clk_src = 0,
++ .cmd_edge = MSDC_SMPL_FALLING,
++ .data_edge = MSDC_SMPL_FALLING,
++ .clk_drv = 4,
++ .cmd_drv = 4,
++ .dat_drv = 4,
++ .data_pins = 4,
++ .data_offset = 0,
++ .flags = MSDC_SYS_SUSPEND | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++// .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE,
++};
++
++static struct resource mtk_sd_resources[] = {
++ [0] = {
++ .start = RALINK_MSDC_BASE,
++ .end = RALINK_MSDC_BASE+0x3fff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_SDC, /*FIXME*/
++ .end = IRQ_SDC, /*FIXME*/
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device mtk_sd_device = {
++ .name = "mtk-sd",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(mtk_sd_resources),
++ .resource = mtk_sd_resources,
++};
++/* end of +++ */
++
++static int msdc_rsp[] = {
++ 0, /* RESP_NONE */
++ 1, /* RESP_R1 */
++ 2, /* RESP_R2 */
++ 3, /* RESP_R3 */
++ 4, /* RESP_R4 */
++ 1, /* RESP_R5 */
++ 1, /* RESP_R6 */
++ 1, /* RESP_R7 */
++ 7, /* RESP_R1b */
++};
++
++/* For Inhanced DMA */
++#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
++ do { \
++ ((gpd_t*)gpd)->extlen = extlen; \
++ ((gpd_t*)gpd)->cmd = cmd; \
++ ((gpd_t*)gpd)->arg = arg; \
++ ((gpd_t*)gpd)->blknum = blknum; \
++ }while(0)
++
++#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
++ do { \
++ BUG_ON(dlen > 0xFFFFUL); \
++ ((bd_t*)bd)->blkpad = blkpad; \
++ ((bd_t*)bd)->dwpad = dwpad; \
++ ((bd_t*)bd)->ptr = (void*)dptr; \
++ ((bd_t*)bd)->buflen = dlen; \
++ }while(0)
++
++#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
++#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
++#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v))
++#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v))
++#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA)
++#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA)
++
++
++#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
++#define msdc_dma_off() sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
++
++#define msdc_retry(expr,retry,cnt) \
++ do { \
++ int backup = cnt; \
++ while (retry) { \
++ if (!(expr)) break; \
++ if (cnt-- == 0) { \
++ retry--; mdelay(1); cnt = backup; \
++ } \
++ } \
++ WARN_ON(retry == 0); \
++ } while(0)
++
++#if 0 /* --- by chhung */
++#define msdc_reset() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++ dsb(); \
++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++ } while(0)
++#else
++#define msdc_reset() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++ } while(0)
++#endif /* end of +/- */
++
++#define msdc_clr_int() \
++ do { \
++ volatile u32 val = sdr_read32(MSDC_INT); \
++ sdr_write32(MSDC_INT, val); \
++ } while(0)
++
++#define msdc_clr_fifo() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
++ msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
++ } while(0)
++
++#define msdc_irq_save(val) \
++ do { \
++ val = sdr_read32(MSDC_INTEN); \
++ sdr_clr_bits(MSDC_INTEN, val); \
++ } while(0)
++
++#define msdc_irq_restore(val) \
++ do { \
++ sdr_set_bits(MSDC_INTEN, val); \
++ } while(0)
++
++/* clock source for host: global */
++#if defined (CONFIG_SOC_MT7620)
++static u32 hclks[] = {48000000}; /* +/- by chhung */
++#elif defined (CONFIG_SOC_MT7621)
++static u32 hclks[] = {50000000}; /* +/- by chhung */
++#endif
++
++//============================================
++// the power for msdc host controller: global
++// always keep the VMC on.
++//============================================
++#define msdc_vcore_on(host) \
++ do { \
++ INIT_MSG("[+]VMC ref. count<%d>", ++host->pwr_ref); \
++ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
++ } while (0)
++#define msdc_vcore_off(host) \
++ do { \
++ INIT_MSG("[-]VMC ref. count<%d>", --host->pwr_ref); \
++ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
++ } while (0)
++
++//====================================
++// the vdd output for card: global
++// always keep the VMCH on.
++//====================================
++#define msdc_vdd_on(host) \
++ do { \
++ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
++ } while (0)
++#define msdc_vdd_off(host) \
++ do { \
++ (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
++ } while (0)
++
++#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
++#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
++
++#define sdc_send_cmd(cmd,arg) \
++ do { \
++ sdr_write32(SDC_ARG, (arg)); \
++ sdr_write32(SDC_CMD, (cmd)); \
++ } while(0)
++
++// can modify to read h/w register.
++//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
++#define is_card_present(h) (((struct msdc_host*)(h))->card_inserted)
++
++/* +++ by chhung */
++#ifndef __ASSEMBLY__
++#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
++#else
++#define PHYSADDR(a) ((a) & 0x1fffffff)
++#endif
++/* end of +++ */
++static unsigned int msdc_do_command(struct msdc_host *host,
++ struct mmc_command *cmd,
++ int tune,
++ unsigned long timeout);
++
++static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
++
++#ifdef MT6575_SD_DEBUG
++static void msdc_dump_card_status(struct msdc_host *host, u32 status)
++{
++ static char *state[] = {
++ "Idle", /* 0 */
++ "Ready", /* 1 */
++ "Ident", /* 2 */
++ "Stby", /* 3 */
++ "Tran", /* 4 */
++ "Data", /* 5 */
++ "Rcv", /* 6 */
++ "Prg", /* 7 */
++ "Dis", /* 8 */
++ "Reserved", /* 9 */
++ "Reserved", /* 10 */
++ "Reserved", /* 11 */
++ "Reserved", /* 12 */
++ "Reserved", /* 13 */
++ "Reserved", /* 14 */
++ "I/O mode", /* 15 */
++ };
++ if (status & R1_OUT_OF_RANGE)
++ N_MSG(RSP, "[CARD_STATUS] Out of Range");
++ if (status & R1_ADDRESS_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Address Error");
++ if (status & R1_BLOCK_LEN_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Block Len Error");
++ if (status & R1_ERASE_SEQ_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Erase Seq Error");
++ if (status & R1_ERASE_PARAM)
++ N_MSG(RSP, "[CARD_STATUS] Erase Param");
++ if (status & R1_WP_VIOLATION)
++ N_MSG(RSP, "[CARD_STATUS] WP Violation");
++ if (status & R1_CARD_IS_LOCKED)
++ N_MSG(RSP, "[CARD_STATUS] Card is Locked");
++ if (status & R1_LOCK_UNLOCK_FAILED)
++ N_MSG(RSP, "[CARD_STATUS] Lock/Unlock Failed");
++ if (status & R1_COM_CRC_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Command CRC Error");
++ if (status & R1_ILLEGAL_COMMAND)
++ N_MSG(RSP, "[CARD_STATUS] Illegal Command");
++ if (status & R1_CARD_ECC_FAILED)
++ N_MSG(RSP, "[CARD_STATUS] Card ECC Failed");
++ if (status & R1_CC_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] CC Error");
++ if (status & R1_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Error");
++ if (status & R1_UNDERRUN)
++ N_MSG(RSP, "[CARD_STATUS] Underrun");
++ if (status & R1_OVERRUN)
++ N_MSG(RSP, "[CARD_STATUS] Overrun");
++ if (status & R1_CID_CSD_OVERWRITE)
++ N_MSG(RSP, "[CARD_STATUS] CID/CSD Overwrite");
++ if (status & R1_WP_ERASE_SKIP)
++ N_MSG(RSP, "[CARD_STATUS] WP Eraser Skip");
++ if (status & R1_CARD_ECC_DISABLED)
++ N_MSG(RSP, "[CARD_STATUS] Card ECC Disabled");
++ if (status & R1_ERASE_RESET)
++ N_MSG(RSP, "[CARD_STATUS] Erase Reset");
++ if (status & R1_READY_FOR_DATA)
++ N_MSG(RSP, "[CARD_STATUS] Ready for Data");
++ if (status & R1_SWITCH_ERROR)
++ N_MSG(RSP, "[CARD_STATUS] Switch error");
++ if (status & R1_APP_CMD)
++ N_MSG(RSP, "[CARD_STATUS] App Command");
++
++ N_MSG(RSP, "[CARD_STATUS] '%s' State", state[R1_CURRENT_STATE(status)]);
++}
++
++static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
++{
++ if (resp & (1 << 7))
++ N_MSG(RSP, "[OCR] Low Voltage Range");
++ if (resp & (1 << 15))
++ N_MSG(RSP, "[OCR] 2.7-2.8 volt");
++ if (resp & (1 << 16))
++ N_MSG(RSP, "[OCR] 2.8-2.9 volt");
++ if (resp & (1 << 17))
++ N_MSG(RSP, "[OCR] 2.9-3.0 volt");
++ if (resp & (1 << 18))
++ N_MSG(RSP, "[OCR] 3.0-3.1 volt");
++ if (resp & (1 << 19))
++ N_MSG(RSP, "[OCR] 3.1-3.2 volt");
++ if (resp & (1 << 20))
++ N_MSG(RSP, "[OCR] 3.2-3.3 volt");
++ if (resp & (1 << 21))
++ N_MSG(RSP, "[OCR] 3.3-3.4 volt");
++ if (resp & (1 << 22))
++ N_MSG(RSP, "[OCR] 3.4-3.5 volt");
++ if (resp & (1 << 23))
++ N_MSG(RSP, "[OCR] 3.5-3.6 volt");
++ if (resp & (1 << 24))
++ N_MSG(RSP, "[OCR] Switching to 1.8V Accepted (S18A)");
++ if (resp & (1 << 30))
++ N_MSG(RSP, "[OCR] Card Capacity Status (CCS)");
++ if (resp & (1 << 31))
++ N_MSG(RSP, "[OCR] Card Power Up Status (Idle)");
++ else
++ N_MSG(RSP, "[OCR] Card Power Up Status (Busy)");
++}
++
++static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
++{
++ u32 status = (((resp >> 15) & 0x1) << 23) |
++ (((resp >> 14) & 0x1) << 22) |
++ (((resp >> 13) & 0x1) << 19) |
++ (resp & 0x1fff);
++
++ N_MSG(RSP, "[RCA] 0x%.4x", resp >> 16);
++ msdc_dump_card_status(host, status);
++}
++
++static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
++{
++ u32 flags = (resp >> 8) & 0xFF;
++ char *state[] = {"DIS", "CMD", "TRN", "RFU"};
++
++ if (flags & (1 << 7))
++ N_MSG(RSP, "[IO] COM_CRC_ERR");
++ if (flags & (1 << 6))
++ N_MSG(RSP, "[IO] Illgal command");
++ if (flags & (1 << 3))
++ N_MSG(RSP, "[IO] Error");
++ if (flags & (1 << 2))
++ N_MSG(RSP, "[IO] RFU");
++ if (flags & (1 << 1))
++ N_MSG(RSP, "[IO] Function number error");
++ if (flags & (1 << 0))
++ N_MSG(RSP, "[IO] Out of range");
++
++ N_MSG(RSP, "[IO] State: %s, Data:0x%x", state[(resp >> 12) & 0x3], resp & 0xFF);
++}
++#endif
++
++static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
++{
++ u32 base = host->base;
++ u32 timeout, clk_ns;
++
++ host->timeout_ns = ns;
++ host->timeout_clks = clks;
++
++ clk_ns = 1000000000UL / host->sclk;
++ timeout = ns / clk_ns + clks;
++ timeout = timeout >> 16; /* in 65536 sclk cycle unit */
++ timeout = timeout > 1 ? timeout - 1 : 0;
++ timeout = timeout > 255 ? 255 : timeout;
++
++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
++
++ N_MSG(OPS, "Set read data timeout: %dns %dclks -> %d x 65536 cycles",
++ ns, clks, timeout + 1);
++}
++
++/* msdc_eirq_sdio() will be called when EIRQ(for WIFI) */
++static void msdc_eirq_sdio(void *data)
++{
++ struct msdc_host *host = (struct msdc_host *)data;
++
++ N_MSG(INT, "SDIO EINT");
++
++ mmc_signal_sdio_irq(host->mmc);
++}
++
++/* msdc_eirq_cd will not be used! We not using EINT for card detection. */
++static void msdc_eirq_cd(void *data)
++{
++ struct msdc_host *host = (struct msdc_host *)data;
++
++ N_MSG(INT, "CD EINT");
++
++#if 0
++ tasklet_hi_schedule(&host->card_tasklet);
++#else
++ schedule_delayed_work(&host->card_delaywork, HZ);
++#endif
++}
++
++#if 0
++static void msdc_tasklet_card(unsigned long arg)
++{
++ struct msdc_host *host = (struct msdc_host *)arg;
++#else
++static void msdc_tasklet_card(struct work_struct *work)
++{
++ struct msdc_host *host = (struct msdc_host *)container_of(work,
++ struct msdc_host, card_delaywork.work);
++#endif
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ u32 inserted;
++ u32 status = 0;
++ //u32 change = 0;
++
++ spin_lock(&host->lock);
++
++ if (hw->get_cd_status) { // NULL
++ inserted = hw->get_cd_status();
++ } else {
++ status = sdr_read32(MSDC_PS);
++ if (cd_active_low)
++ inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
++ else
++ inserted = (status & MSDC_PS_CDSTS) ? 1 : 0;
++ }
++
++#if 0
++ change = host->card_inserted ^ inserted;
++ host->card_inserted = inserted;
++
++ if (change && !host->suspend) {
++ if (inserted) {
++ host->mmc->f_max = HOST_MAX_MCLK; // work around
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
++ }
++#else /* Make sure: handle the last interrupt */
++ host->card_inserted = inserted;
++
++ if (!host->suspend) {
++ host->mmc->f_max = HOST_MAX_MCLK;
++ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
++ }
++
++ IRQ_MSG("card found<%s>", inserted ? "inserted" : "removed");
++#endif
++
++ spin_unlock(&host->lock);
++}
++
++#if 0 /* --- by chhung */
++/* For E2 only */
++static u8 clk_src_bit[4] = {
++ 0, 3, 5, 7
++};
++
++static void msdc_select_clksrc(struct msdc_host* host, unsigned char clksrc)
++{
++ u32 val;
++ u32 base = host->base;
++
++ BUG_ON(clksrc > 3);
++ INIT_MSG("set clock source to <%d>", clksrc);
++
++ val = sdr_read32(MSDC_CLKSRC_REG);
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ val &= ~(0x3 << clk_src_bit[host->id]);
++ val |= clksrc << clk_src_bit[host->id];
++ } else {
++ val &= ~0x3; val |= clksrc;
++ }
++ sdr_write32(MSDC_CLKSRC_REG, val);
++
++ host->hclk = hclks[clksrc];
++ host->hw->clk_src = clksrc;
++}
++#endif /* end of --- */
++
++static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
++{
++ //struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ u32 mode;
++ u32 flags;
++ u32 div;
++ u32 sclk;
++ u32 hclk = host->hclk;
++ //u8 clksrc = hw->clk_src;
++
++ if (!hz) { // set mmc system clock to 0 ?
++ //ERR_MSG("set mclk to 0!!!");
++ msdc_reset();
++ return;
++ }
++
++ msdc_irq_save(flags);
++
++#if defined (CONFIG_MT7621_FPGA) || defined (CONFIG_MT7628_FPGA)
++ mode = 0x0; /* use divisor */
++ if (hz >= (hclk >> 1)) {
++ div = 0; /* mean div = 1/2 */
++ sclk = hclk >> 1; /* sclk = clk / 2 */
++ } else {
++ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++ sclk = (hclk >> 2) / div;
++ }
++#else
++ if (ddr) {
++ mode = 0x2; /* ddr mode and use divisor */
++ if (hz >= (hclk >> 2)) {
++ div = 1; /* mean div = 1/4 */
++ sclk = hclk >> 2; /* sclk = clk / 4 */
++ } else {
++ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++ sclk = (hclk >> 2) / div;
++ }
++ } else if (hz >= hclk) { /* bug fix */
++ mode = 0x1; /* no divisor and divisor is ignored */
++ div = 0;
++ sclk = hclk;
++ } else {
++ mode = 0x0; /* use divisor */
++ if (hz >= (hclk >> 1)) {
++ div = 0; /* mean div = 1/2 */
++ sclk = hclk >> 1; /* sclk = clk / 2 */
++ } else {
++ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++ sclk = (hclk >> 2) / div;
++ }
++ }
++#endif
++ /* set clock mode and divisor */
++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
++
++ /* wait clock stable */
++ while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
++
++ host->sclk = sclk;
++ host->mclk = hz;
++ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?
++
++ INIT_MSG("================");
++ INIT_MSG("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>", hz/1000, hclk/1000, sclk/1000);
++ INIT_MSG("================");
++
++ msdc_irq_restore(flags);
++}
++
++/* Fix me. when need to abort */
++static void msdc_abort_data(struct msdc_host *host)
++{
++ u32 base = host->base;
++ struct mmc_command *stop = host->mrq->stop;
++
++ ERR_MSG("Need to Abort. dma<%d>", host->dma_xfer);
++
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++
++ // need to check FIFO count 0 ?
++
++ if (stop) { /* try to stop, but may not success */
++ ERR_MSG("stop when abort CMD<%d>", stop->opcode);
++ (void)msdc_do_command(host, stop, 0, CMD_TIMEOUT);
++ }
++
++ //if (host->mclk >= 25000000) {
++ // msdc_set_mclk(host, 0, host->mclk >> 1);
++ //}
++}
++
++#if 0 /* --- by chhung */
++static void msdc_pin_config(struct msdc_host *host, int mode)
++{
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
++
++ /* Config WP pin */
++ if (hw->flags & MSDC_WP_PIN_EN) {
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_WP_PIN, pull);
++ }
++
++ switch (mode) {
++ case MSDC_PIN_PULL_UP:
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 1); /* Check & FIXME */
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 1);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 1);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
++ break;
++ case MSDC_PIN_PULL_DOWN:
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 1); /* Check & FIXME */
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 1);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 1);
++ break;
++ case MSDC_PIN_PULL_NONE:
++ default:
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
++ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
++ break;
++ }
++
++ N_MSG(CFG, "Pins mode(%d), down(%d), up(%d)",
++ mode, MSDC_PIN_PULL_DOWN, MSDC_PIN_PULL_UP);
++}
++
++void msdc_pin_reset(struct msdc_host *host, int mode)
++{
++ struct msdc_hw *hw = (struct msdc_hw *)host->hw;
++ u32 base = host->base;
++ int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
++
++ /* Config reset pin */
++ if (hw->flags & MSDC_RST_PIN_EN) {
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_RST_PIN, pull);
++
++ if (mode == MSDC_PIN_PULL_UP) {
++ sdr_clr_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
++ } else {
++ sdr_set_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
++ }
++ }
++}
++
++static void msdc_core_power(struct msdc_host *host, int on)
++{
++ N_MSG(CFG, "Turn %s %s power (copower: %d -> %d)",
++ on ? "on" : "off", "core", host->core_power, on);
++
++ if (on && host->core_power == 0) {
++ msdc_vcore_on(host);
++ host->core_power = 1;
++ msleep(1);
++ } else if (!on && host->core_power == 1) {
++ msdc_vcore_off(host);
++ host->core_power = 0;
++ msleep(1);
++ }
++}
++
++static void msdc_host_power(struct msdc_host *host, int on)
++{
++ N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "host");
++
++ if (on) {
++ //msdc_core_power(host, 1); // need do card detection.
++ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
++ } else {
++ msdc_pin_reset(host, MSDC_PIN_PULL_DOWN);
++ //msdc_core_power(host, 0);
++ }
++}
++
++static void msdc_card_power(struct msdc_host *host, int on)
++{
++ N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "card");
++
++ if (on) {
++ msdc_pin_config(host, MSDC_PIN_PULL_UP);
++ if (host->hw->ext_power_on) {
++ host->hw->ext_power_on();
++ } else {
++ //msdc_vdd_on(host); // need todo card detection.
++ }
++ msleep(1);
++ } else {
++ if (host->hw->ext_power_off) {
++ host->hw->ext_power_off();
++ } else {
++ //msdc_vdd_off(host);
++ }
++ msdc_pin_config(host, MSDC_PIN_PULL_DOWN);
++ msleep(1);
++ }
++}
++
++static void msdc_set_power_mode(struct msdc_host *host, u8 mode)
++{
++ N_MSG(CFG, "Set power mode(%d)", mode);
++
++ if (host->power_mode == MMC_POWER_OFF && mode != MMC_POWER_OFF) {
++ msdc_host_power(host, 1);
++ msdc_card_power(host, 1);
++ } else if (host->power_mode != MMC_POWER_OFF && mode == MMC_POWER_OFF) {
++ msdc_card_power(host, 0);
++ msdc_host_power(host, 0);
++ }
++ host->power_mode = mode;
++}
++#endif /* end of --- */
++
++#ifdef CONFIG_PM
++/*
++ register as callback function of WIFI(combo_sdio_register_pm) .
++ can called by msdc_drv_suspend/resume too.
++*/
++static void msdc_pm(pm_message_t state, void *data)
++{
++ struct msdc_host *host = (struct msdc_host *)data;
++ int evt = state.event;
++
++ if (evt == PM_EVENT_USER_RESUME || evt == PM_EVENT_USER_SUSPEND) {
++ INIT_MSG("USR_%s: suspend<%d> power<%d>",
++ evt == PM_EVENT_USER_RESUME ? "EVENT_USER_RESUME" : "EVENT_USER_SUSPEND",
++ host->suspend, host->power_mode);
++ }
++
++ if (evt == PM_EVENT_SUSPEND || evt == PM_EVENT_USER_SUSPEND) {
++ if (host->suspend) /* already suspend */ /* default 0*/
++ return;
++
++ /* for memory card. already power off by mmc */
++ if (evt == PM_EVENT_SUSPEND && host->power_mode == MMC_POWER_OFF)
++ return;
++
++ host->suspend = 1;
++ host->pm_state = state; /* default PMSG_RESUME */
++
++ INIT_MSG("%s Suspend", evt == PM_EVENT_SUSPEND ? "PM" : "USR");
++ if(host->hw->flags & MSDC_SYS_SUSPEND) /* set for card */
++ (void)mmc_suspend_host(host->mmc);
++ else {
++ // host->mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* just for double confirm */ /* --- by chhung */
++ mmc_remove_host(host->mmc);
++ }
++ } else if (evt == PM_EVENT_RESUME || evt == PM_EVENT_USER_RESUME) {
++ if (!host->suspend){
++ //ERR_MSG("warning: already resume");
++ return;
++ }
++
++ /* No PM resume when USR suspend */
++ if (evt == PM_EVENT_RESUME && host->pm_state.event == PM_EVENT_USER_SUSPEND) {
++ ERR_MSG("PM Resume when in USR Suspend"); /* won't happen. */
++ return;
++ }
++
++ host->suspend = 0;
++ host->pm_state = state;
++
++ INIT_MSG("%s Resume", evt == PM_EVENT_RESUME ? "PM" : "USR");
++ if(host->hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
++ (void)mmc_resume_host(host->mmc);
++ }
++ else {
++ // host->mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* --- by chhung */
++ mmc_add_host(host->mmc);
++ }
++ }
++}
++#endif
++
++/*--------------------------------------------------------------------------*/
++/* mmc_host_ops members */
++/*--------------------------------------------------------------------------*/
++static unsigned int msdc_command_start(struct msdc_host *host,
++ struct mmc_command *cmd,
++ int tune, /* not used */
++ unsigned long timeout)
++{
++ u32 base = host->base;
++ u32 opcode = cmd->opcode;
++ u32 rawcmd;
++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++ MSDC_INT_ACMD19_DONE;
++
++ u32 resp;
++ unsigned long tmo;
++
++ /* Protocol layer does not provide response type, but our hardware needs
++ * to know exact type, not just size!
++ */
++ if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
++ resp = RESP_R3;
++ else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
++ resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
++ else if (opcode == MMC_FAST_IO)
++ resp = RESP_R4;
++ else if (opcode == MMC_GO_IRQ_STATE)
++ resp = RESP_R5;
++ else if (opcode == MMC_SELECT_CARD)
++ resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
++ else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
++ resp = RESP_R1; /* SDIO workaround. */
++ else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
++ resp = RESP_R1;
++ else {
++ switch (mmc_resp_type(cmd)) {
++ case MMC_RSP_R1:
++ resp = RESP_R1;
++ break;
++ case MMC_RSP_R1B:
++ resp = RESP_R1B;
++ break;
++ case MMC_RSP_R2:
++ resp = RESP_R2;
++ break;
++ case MMC_RSP_R3:
++ resp = RESP_R3;
++ break;
++ case MMC_RSP_NONE:
++ default:
++ resp = RESP_NONE;
++ break;
++ }
++ }
++
++ cmd->error = 0;
++ /* rawcmd :
++ * vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
++ * stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
++ */
++ rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
++
++ if (opcode == MMC_READ_MULTIPLE_BLOCK) {
++ rawcmd |= (2 << 11);
++ } else if (opcode == MMC_READ_SINGLE_BLOCK) {
++ rawcmd |= (1 << 11);
++ } else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
++ rawcmd |= ((2 << 11) | (1 << 13));
++ } else if (opcode == MMC_WRITE_BLOCK) {
++ rawcmd |= ((1 << 11) | (1 << 13));
++ } else if (opcode == SD_IO_RW_EXTENDED) {
++ if (cmd->data->flags & MMC_DATA_WRITE)
++ rawcmd |= (1 << 13);
++ if (cmd->data->blocks > 1)
++ rawcmd |= (2 << 11);
++ else
++ rawcmd |= (1 << 11);
++ } else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
++ rawcmd |= (1 << 14);
++ } else if ((opcode == SD_APP_SEND_SCR) ||
++ (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
++ (opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++ (opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++ (opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
++ rawcmd |= (1 << 11);
++ } else if (opcode == MMC_STOP_TRANSMISSION) {
++ rawcmd |= (1 << 14);
++ rawcmd &= ~(0x0FFF << 16);
++ }
++
++ N_MSG(CMD, "CMD<%d><0x%.8x> Arg<0x%.8x>", opcode , rawcmd, cmd->arg);
++
++ tmo = jiffies + timeout;
++
++ if (opcode == MMC_SEND_STATUS) {
++ for (;;) {
++ if (!sdc_is_cmd_busy())
++ break;
++
++ if (time_after(jiffies, tmo)) {
++ ERR_MSG("XXX cmd_busy timeout: before CMD<%d>", opcode);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ goto end;
++ }
++ }
++ }else {
++ for (;;) {
++ if (!sdc_is_busy())
++ break;
++ if (time_after(jiffies, tmo)) {
++ ERR_MSG("XXX sdc_busy timeout: before CMD<%d>", opcode);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ goto end;
++ }
++ }
++ }
++
++ //BUG_ON(in_interrupt());
++ host->cmd = cmd;
++ host->cmd_rsp = resp;
++
++ init_completion(&host->cmd_done);
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ sdc_send_cmd(rawcmd, cmd->arg);
++
++end:
++ return cmd->error;
++}
++
++static unsigned int msdc_command_resp(struct msdc_host *host,
++ struct mmc_command *cmd,
++ int tune,
++ unsigned long timeout)
++{
++ u32 base = host->base;
++ u32 opcode = cmd->opcode;
++ //u32 rawcmd;
++ u32 resp;
++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++ MSDC_INT_ACMD19_DONE;
++
++ resp = host->cmd_rsp;
++
++ BUG_ON(in_interrupt());
++ //init_completion(&host->cmd_done);
++ //sdr_set_bits(MSDC_INTEN, wints);
++
++ spin_unlock(&host->lock);
++ if(!wait_for_completion_timeout(&host->cmd_done, 10*timeout)){
++ ERR_MSG("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>", opcode, cmd->arg);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ }
++ spin_lock(&host->lock);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++ host->cmd = NULL;
++
++//end:
++#ifdef MT6575_SD_DEBUG
++ switch (resp) {
++ case RESP_NONE:
++ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)", opcode, cmd->error, resp);
++ break;
++ case RESP_R2:
++ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= %.8x %.8x %.8x %.8x",
++ opcode, cmd->error, resp, cmd->resp[0], cmd->resp[1],
++ cmd->resp[2], cmd->resp[3]);
++ break;
++ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
++ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= 0x%.8x",
++ opcode, cmd->error, resp, cmd->resp[0]);
++ if (cmd->error == 0) {
++ switch (resp) {
++ case RESP_R1:
++ case RESP_R1B:
++ msdc_dump_card_status(host, cmd->resp[0]);
++ break;
++ case RESP_R3:
++ msdc_dump_ocr_reg(host, cmd->resp[0]);
++ break;
++ case RESP_R5:
++ msdc_dump_io_resp(host, cmd->resp[0]);
++ break;
++ case RESP_R6:
++ msdc_dump_rca_resp(host, cmd->resp[0]);
++ break;
++ }
++ }
++ break;
++ }
++#endif
++
++ /* do we need to save card's RCA when SD_SEND_RELATIVE_ADDR */
++
++ if (!tune) {
++ return cmd->error;
++ }
++
++ /* memory card CRC */
++ if(host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
++ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
++ msdc_abort_data(host);
++ } else {
++ /* do basic: reset*/
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ cmd->error = msdc_tune_cmdrsp(host,cmd);
++ }
++
++ // check DAT0
++ /* if (resp == RESP_R1B) {
++ while ((sdr_read32(MSDC_PS) & 0x10000) != 0x10000);
++ } */
++ /* CMD12 Error Handle */
++
++ return cmd->error;
++}
++
++static unsigned int msdc_do_command(struct msdc_host *host,
++ struct mmc_command *cmd,
++ int tune,
++ unsigned long timeout)
++{
++ if (msdc_command_start(host, cmd, tune, timeout))
++ goto end;
++
++ if (msdc_command_resp(host, cmd, tune, timeout))
++ goto end;
++
++end:
++
++ N_MSG(CMD, " return<%d> resp<0x%.8x>", cmd->error, cmd->resp[0]);
++ return cmd->error;
++}
++
++/* The abort condition when PIO read/write
++ tmo:
++*/
++static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
++{
++ int ret = 0;
++ u32 base = host->base;
++
++ if (atomic_read(&host->abort)) {
++ ret = 1;
++ }
++
++ if (time_after(jiffies, tmo)) {
++ data->error = (unsigned int)-ETIMEDOUT;
++ ERR_MSG("XXX PIO Data Timeout: CMD<%d>", host->mrq->cmd->opcode);
++ ret = 1;
++ }
++
++ if(ret) {
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ ERR_MSG("msdc pio find abort");
++ }
++ return ret;
++}
++
++/*
++ Need to add a timeout, or WDT timeout, system reboot.
++*/
++// pio mode data read/write
++static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
++{
++ struct scatterlist *sg = data->sg;
++ u32 base = host->base;
++ u32 num = data->sg_len;
++ u32 *ptr;
++ u8 *u8ptr;
++ u32 left = 0;
++ u32 count, size = 0;
++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
++ unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ while (num) {
++ left = sg_dma_len(sg);
++ ptr = sg_virt(sg);
++ while (left) {
++ if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
++ count = MSDC_FIFO_THD >> 2;
++ do {
++ *ptr++ = msdc_fifo_read32();
++ } while (--count);
++ left -= MSDC_FIFO_THD;
++ } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
++ while (left > 3) {
++ *ptr++ = msdc_fifo_read32();
++ left -= 4;
++ }
++
++ u8ptr = (u8 *)ptr;
++ while(left) {
++ * u8ptr++ = msdc_fifo_read8();
++ left--;
++ }
++ }
++
++ if (msdc_pio_abort(host, data, tmo)) {
++ goto end;
++ }
++ }
++ size += sg_dma_len(sg);
++ sg = sg_next(sg); num--;
++ }
++end:
++ data->bytes_xfered += size;
++ N_MSG(FIO, " PIO Read<%d>bytes", size);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++ if(data->error) ERR_MSG("read pio data->error<%d> left<%d> size<%d>", data->error, left, size);
++ return data->error;
++}
++
++/* please make sure won't using PIO when size >= 512
++ which means, memory card block read/write won't using pio
++ then don't need to handle the CMD12 when data error.
++*/
++static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
++{
++ u32 base = host->base;
++ struct scatterlist *sg = data->sg;
++ u32 num = data->sg_len;
++ u32 *ptr;
++ u8 *u8ptr;
++ u32 left;
++ u32 count, size = 0;
++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
++ unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ while (num) {
++ left = sg_dma_len(sg);
++ ptr = sg_virt(sg);
++
++ while (left) {
++ if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++ count = MSDC_FIFO_SZ >> 2;
++ do {
++ msdc_fifo_write32(*ptr); ptr++;
++ } while (--count);
++ left -= MSDC_FIFO_SZ;
++ } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++ while (left > 3) {
++ msdc_fifo_write32(*ptr); ptr++;
++ left -= 4;
++ }
++
++ u8ptr = (u8*)ptr;
++ while(left){
++ msdc_fifo_write8(*u8ptr); u8ptr++;
++ left--;
++ }
++ }
++
++ if (msdc_pio_abort(host, data, tmo)) {
++ goto end;
++ }
++ }
++ size += sg_dma_len(sg);
++ sg = sg_next(sg); num--;
++ }
++end:
++ data->bytes_xfered += size;
++ N_MSG(FIO, " PIO Write<%d>bytes", size);
++ if(data->error) ERR_MSG("write pio data->error<%d>", data->error);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++ return data->error;
++}
++
++#if 0 /* --- by chhung */
++// DMA resume / start / stop
++static void msdc_dma_resume(struct msdc_host *host)
++{
++ u32 base = host->base;
++
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_RESUME, 1);
++
++ N_MSG(DMA, "DMA resume");
++}
++#endif /* end of --- */
++
++static void msdc_dma_start(struct msdc_host *host)
++{
++ u32 base = host->base;
++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ //dsb(); /* --- by chhung */
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
++
++ N_MSG(DMA, "DMA start");
++}
++
++static void msdc_dma_stop(struct msdc_host *host)
++{
++ u32 base = host->base;
++ //u32 retries=500;
++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
++
++ N_MSG(DMA, "DMA status: 0x%.8x",sdr_read32(MSDC_DMA_CFG));
++ //while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
++
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
++ while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
++
++ //dsb(); /* --- by chhung */
++ sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
++
++ N_MSG(DMA, "DMA stop");
++}
++
++#if 0 /* --- by chhung */
++/* dump a gpd list */
++static void msdc_dma_dump(struct msdc_host *host, struct msdc_dma *dma)
++{
++ gpd_t *gpd = dma->gpd;
++ bd_t *bd = dma->bd;
++ bd_t *ptr;
++ int i = 0;
++ int p_to_v;
++
++ if (dma->mode != MSDC_MODE_DMA_DESC) {
++ return;
++ }
++
++ ERR_MSG("try to dump gpd and bd");
++
++ /* dump gpd */
++ ERR_MSG(".gpd<0x%.8x> gpd_phy<0x%.8x>", (int)gpd, (int)dma->gpd_addr);
++ ERR_MSG("...hwo <%d>", gpd->hwo );
++ ERR_MSG("...bdp <%d>", gpd->bdp );
++ ERR_MSG("...chksum<0x%.8x>", gpd->chksum );
++ //ERR_MSG("...intr <0x%.8x>", gpd->intr );
++ ERR_MSG("...next <0x%.8x>", (int)gpd->next );
++ ERR_MSG("...ptr <0x%.8x>", (int)gpd->ptr );
++ ERR_MSG("...buflen<0x%.8x>", gpd->buflen );
++ //ERR_MSG("...extlen<0x%.8x>", gpd->extlen );
++ //ERR_MSG("...arg <0x%.8x>", gpd->arg );
++ //ERR_MSG("...blknum<0x%.8x>", gpd->blknum );
++ //ERR_MSG("...cmd <0x%.8x>", gpd->cmd );
++
++ /* dump bd */
++ ERR_MSG(".bd<0x%.8x> bd_phy<0x%.8x> gpd_ptr<0x%.8x>", (int)bd, (int)dma->bd_addr, (int)gpd->ptr);
++ ptr = bd;
++ p_to_v = ((u32)bd - (u32)dma->bd_addr);
++ while (1) {
++ ERR_MSG(".bd[%d]", i); i++;
++ ERR_MSG("...eol <%d>", ptr->eol );
++ ERR_MSG("...chksum<0x%.8x>", ptr->chksum );
++ //ERR_MSG("...blkpad<0x%.8x>", ptr->blkpad );
++ //ERR_MSG("...dwpad <0x%.8x>", ptr->dwpad );
++ ERR_MSG("...next <0x%.8x>", (int)ptr->next );
++ ERR_MSG("...ptr <0x%.8x>", (int)ptr->ptr );
++ ERR_MSG("...buflen<0x%.8x>", (int)ptr->buflen );
++
++ if (ptr->eol == 1) {
++ break;
++ }
++
++ /* find the next bd, virtual address of ptr->next */
++ /* don't need to enable when use malloc */
++ //BUG_ON( (ptr->next + p_to_v)!=(ptr+1) );
++ //ERR_MSG(".next bd<0x%.8x><0x%.8x>", (ptr->next + p_to_v), (ptr+1));
++ ptr++;
++ }
++
++ ERR_MSG("dump gpd and bd finished");
++}
++#endif /* end of --- */
++
++/* calc checksum */
++static u8 msdc_dma_calcs(u8 *buf, u32 len)
++{
++ u32 i, sum = 0;
++ for (i = 0; i < len; i++) {
++ sum += buf[i];
++ }
++ return 0xFF - (u8)sum;
++}
++
++/* gpd bd setup + dma registers */
++static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
++{
++ u32 base = host->base;
++ u32 sglen = dma->sglen;
++ //u32 i, j, num, bdlen, arg, xfersz;
++ u32 j, num, bdlen;
++ u8 blkpad, dwpad, chksum;
++ struct scatterlist *sg = dma->sg;
++ gpd_t *gpd;
++ bd_t *bd;
++
++ switch (dma->mode) {
++ case MSDC_MODE_DMA_BASIC:
++ BUG_ON(dma->xfersz > 65535);
++ BUG_ON(dma->sglen != 1);
++ sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
++//#if defined (CONFIG_RALINK_MT7620)
++ if (ralink_soc == MT762X_SOC_MT7620A)
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
++//#elif defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++ else
++ sdr_write32((volatile u32*)(RALINK_MSDC_BASE+0xa8), sg_dma_len(sg));
++//#endif
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
++ break;
++ case MSDC_MODE_DMA_DESC:
++ blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
++ dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
++ chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
++
++ /* calculate the required number of gpd */
++ num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
++ BUG_ON(num !=1 );
++
++ gpd = dma->gpd;
++ bd = dma->bd;
++ bdlen = sglen;
++
++ /* modify gpd*/
++ //gpd->intr = 0;
++ gpd->hwo = 1; /* hw will clear it */
++ gpd->bdp = 1;
++ gpd->chksum = 0; /* need to clear first. */
++ gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
++
++ /* modify bd*/
++ for (j = 0; j < bdlen; j++) {
++ msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
++ if(j == bdlen - 1) {
++ bd[j].eol = 1; /* the last bd */
++ } else {
++ bd[j].eol = 0;
++ }
++ bd[j].chksum = 0; /* checksume need to clear first */
++ bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
++ sg++;
++ }
++
++ dma->used_gpd += 2;
++ dma->used_bd += bdlen;
++
++ sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
++
++ sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
++ break;
++
++ default:
++ break;
++ }
++
++ N_MSG(DMA, "DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
++ N_MSG(DMA, "DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
++ N_MSG(DMA, "DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
++
++ return 0;
++}
++
++static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
++ struct scatterlist *sg, unsigned int sglen)
++{
++ BUG_ON(sglen > MAX_BD_NUM); /* not support currently */
++
++ dma->sg = sg;
++ dma->flags = DMA_FLAG_EN_CHKSUM;
++ //dma->flags = DMA_FLAG_NONE; /* CHECKME */
++ dma->sglen = sglen;
++ dma->xfersz = host->xfer_size;
++ dma->burstsz = MSDC_BRUST_64B;
++
++ if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
++ dma->mode = MSDC_MODE_DMA_BASIC;
++ else
++ dma->mode = MSDC_MODE_DMA_DESC;
++
++ N_MSG(DMA, "DMA mode<%d> sglen<%d> xfersz<%d>", dma->mode, dma->sglen, dma->xfersz);
++
++ msdc_dma_config(host, dma);
++
++ /*if (dma->mode == MSDC_MODE_DMA_DESC) {
++ //msdc_dma_dump(host, dma);
++ } */
++}
++
++/* set block number before send command */
++static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
++{
++ u32 base = host->base;
++
++ sdr_write32(SDC_BLK_NUM, blknum);
++}
++
++static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ u32 base = host->base;
++ //u32 intsts = 0;
++ unsigned int left=0;
++ int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
++
++ #define SND_DAT 0
++ #define SND_CMD 1
++
++ BUG_ON(mmc == NULL);
++ BUG_ON(mrq == NULL);
++
++ host->error = 0;
++ atomic_set(&host->abort, 0);
++
++ cmd = mrq->cmd;
++ data = mrq->cmd->data;
++
++#if 0 /* --- by chhung */
++ //if(host->id ==1){
++ N_MSG(OPS, "enable clock!");
++ msdc_ungate_clock(host->id);
++ //}
++#endif /* end of --- */
++
++ if (!data) {
++ send_type=SND_CMD;
++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) {
++ goto done;
++ }
++ } else {
++ BUG_ON(data->blksz > HOST_MAX_BLKSZ);
++ send_type=SND_DAT;
++
++ data->error = 0;
++ read = data->flags & MMC_DATA_READ ? 1 : 0;
++ host->data = data;
++ host->xfer_size = data->blocks * data->blksz;
++ host->blksz = data->blksz;
++
++ /* deside the transfer mode */
++ if (drv_mode[host->id] == MODE_PIO) {
++ host->dma_xfer = dma = 0;
++ } else if (drv_mode[host->id] == MODE_DMA) {
++ host->dma_xfer = dma = 1;
++ } else if (drv_mode[host->id] == MODE_SIZE_DEP) {
++ host->dma_xfer = dma = ((host->xfer_size >= dma_size[host->id]) ? 1 : 0);
++ }
++
++ if (read) {
++ if ((host->timeout_ns != data->timeout_ns) ||
++ (host->timeout_clks != data->timeout_clks)) {
++ msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
++ }
++ }
++
++ msdc_set_blknum(host, data->blocks);
++ //msdc_clr_fifo(); /* no need */
++
++ if (dma) {
++ msdc_dma_on(); /* enable DMA mode first!! */
++ init_completion(&host->xfer_done);
++
++ /* start the command first*/
++ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++
++ dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
++ (void)dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++ msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
++
++ /* then wait command done */
++ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++
++ /* for read, the data coming too fast, then CRC error
++ start DMA no business with CRC. */
++ //init_completion(&host->xfer_done);
++ msdc_dma_start(host);
++
++ spin_unlock(&host->lock);
++ if(!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)){
++ ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
++ ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
++ ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
++ ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
++ ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
++ data->error = (unsigned int)-ETIMEDOUT;
++
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ spin_lock(&host->lock);
++ msdc_dma_stop(host);
++ } else {
++ /* Firstly: send command */
++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) {
++ goto done;
++ }
++
++ /* Secondly: pio data phase */
++ if (read) {
++ if (msdc_pio_read(host, data)){
++ goto done;
++ }
++ } else {
++ if (msdc_pio_write(host, data)) {
++ goto done;
++ }
++ }
++
++ /* For write case: make sure contents in fifo flushed to device */
++ if (!read) {
++ while (1) {
++ left=msdc_txfifocnt();
++ if (left == 0) {
++ break;
++ }
++ if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
++ break;
++ /* Fix me: what about if data error, when stop ? how to? */
++ }
++ }
++ } else {
++ /* Fix me: read case: need to check CRC error */
++ }
++
++ /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy.
++ For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
++ */
++
++ /* try not to wait xfer_comp interrupt.
++ the next command will check SDC_BUSY.
++ SDC_BUSY means xfer_comp assert
++ */
++
++ } // PIO mode
++
++ /* Last: stop transfer */
++ if (data->stop){
++ if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
++ goto done;
++ }
++ }
++ }
++
++done:
++ if (data != NULL) {
++ host->data = NULL;
++ host->dma_xfer = 0;
++ if (dma != 0) {
++ msdc_dma_off();
++ host->dma.used_bd = 0;
++ host->dma.used_gpd = 0;
++ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++ }
++ host->blksz = 0;
++
++#if 0 // don't stop twice!
++ if(host->hw->flags & MSDC_REMOVABLE && data->error) {
++ msdc_abort_data(host);
++ /* reset in IRQ, stop command has issued. -> No need */
++ }
++#endif
++
++ N_MSG(OPS, "CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio"),
++ (read ? "read ":"write") ,data->blksz, data->blocks, data->error);
++ }
++
++#if 0 /* --- by chhung */
++#if 1
++ //if(host->id==1) {
++ if(send_type==SND_CMD) {
++ if(cmd->opcode == MMC_SEND_STATUS) {
++ if((cmd->resp[0] & CARD_READY_FOR_DATA) ||(CARD_CURRENT_STATE(cmd->resp[0]) != 7)){
++ N_MSG(OPS,"disable clock, CMD13 IDLE");
++ msdc_gate_clock(host->id);
++ }
++ } else {
++ N_MSG(OPS,"disable clock, CMD<%d>", cmd->opcode);
++ msdc_gate_clock(host->id);
++ }
++ } else {
++ if(read) {
++ N_MSG(OPS,"disable clock!!! Read CMD<%d>",cmd->opcode);
++ msdc_gate_clock(host->id);
++ }
++ }
++ //}
++#else
++ msdc_gate_clock(host->id);
++#endif
++#endif /* end of --- */
++
++ if (mrq->cmd->error) host->error = 0x001;
++ if (mrq->data && mrq->data->error) host->error |= 0x010;
++ if (mrq->stop && mrq->stop->error) host->error |= 0x100;
++
++ //if (host->error) ERR_MSG("host->error<%d>", host->error);
++
++ return host->error;
++}
++
++static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
++{
++ struct mmc_command cmd;
++ struct mmc_request mrq;
++ u32 err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++ cmd.opcode = MMC_APP_CMD;
++#if 0 /* bug: we meet mmc->card is null when ACMD6 */
++ cmd.arg = mmc->card->rca << 16;
++#else
++ cmd.arg = host->app_cmd_arg;
++#endif
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
++
++ memset(&mrq, 0, sizeof(struct mmc_request));
++ mrq.cmd = &cmd; cmd.mrq = &mrq;
++ cmd.data = NULL;
++
++ err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);
++ return err;
++}
++
++static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
++{
++ int result = -1;
++ u32 base = host->base;
++ u32 rsmpl, cur_rsmpl, orig_rsmpl;
++ u32 rrdly, cur_rrdly = 0xffffffff, orig_rrdly;
++ u32 skip = 1;
++
++ /* ==== don't support 3.0 now ====
++ 1: R_SMPL[1]
++ 2: PAD_CMD_RESP_RXDLY[26:22]
++ ==========================*/
++
++ // save the previous tune result
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, orig_rsmpl);
++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
++
++ rrdly = 0;
++ do {
++ for (rsmpl = 0; rsmpl < 2; rsmpl++) {
++ /* Lv1: R_SMPL[1] */
++ cur_rsmpl = (orig_rsmpl + rsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ ERR_MSG("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>",
++ host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
++ continue;
++ }
++ }
++ result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
++ ERR_MSG("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>", cmd->opcode,
++ (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
++
++ if (result == 0) {
++ return 0;
++ }
++ if (result != (unsigned int)(-EIO)) {
++ ERR_MSG("TUNE_CMD<%d> Error<%d> not -EIO", cmd->opcode, result);
++ return result;
++ }
++
++ /* should be EIO */
++ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
++ msdc_abort_data(host);
++ }
++ }
++
++ /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */
++ cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);
++ }while (++rrdly < 32);
++
++ return result;
++}
++
++/* Support SD2.0 Only */
++static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ u32 ddr=0;
++ u32 dcrc=0;
++ u32 rxdly, cur_rxdly0, cur_rxdly1;
++ u32 dsmpl, cur_dsmpl, orig_dsmpl;
++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
++ u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7;
++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++ u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
++ int result = -1;
++ u32 skip = 1;
++
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
++
++ /* Tune Method 2. */
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++
++ rxdly = 0;
++ do {
++ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ ERR_MSG("TUNE_BREAD app_cmd<%d> failed", host->mrq->cmd->opcode);
++ continue;
++ }
++ }
++ result = msdc_do_request(mmc,mrq);
++
++ sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
++ if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
++ ERR_MSG("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>",
++ (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
++ sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
++
++ /* Fix me: result is 0, but dcrc is still exist */
++ if (result == 0 && dcrc == 0) {
++ goto done;
++ } else {
++ /* there is a case: command timeout, and data phase not processed */
++ if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
++ ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
++ result, mrq->cmd->error, mrq->data->error);
++ goto done;
++ }
++ }
++ }
++
++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++ cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
++
++ /* E1 ECO. YD: Reverse */
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
++ orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
++ orig_dat6 = (cur_rxdly1 >> 8) & 0x1F;
++ orig_dat7 = (cur_rxdly1 >> 0) & 0x1F;
++ } else {
++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat4 = (cur_rxdly1 >> 0) & 0x1F;
++ orig_dat5 = (cur_rxdly1 >> 8) & 0x1F;
++ orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
++ orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
++ }
++
++ if (ddr) {
++ cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++ cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++ cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++ cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++ } else {
++ cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++ cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++ cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++ cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++ }
++ cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
++ cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
++ cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
++ cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
++
++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++ cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
++
++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++ sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
++
++ } while (++rxdly < 32);
++
++done:
++ return result;
++}
++
++static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++
++ u32 wrrdly, cur_wrrdly = 0xffffffff, orig_wrrdly;
++ u32 dsmpl, cur_dsmpl, orig_dsmpl;
++ u32 rxdly, cur_rxdly0;
++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
++ int result = -1;
++ u32 skip = 1;
++
++ // MSDC_IOCON_DDR50CKD need to check. [Fix me]
++
++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl );
++
++ /* Tune Method 2. just DAT0 */
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++
++ /* E1 ECO. YD: Reverse */
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
++ } else {
++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++ }
++
++ rxdly = 0;
++ do {
++ wrrdly = 0;
++ do {
++ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ ERR_MSG("TUNE_BWRITE app_cmd<%d> failed", host->mrq->cmd->opcode);
++ continue;
++ }
++ }
++ result = msdc_do_request(mmc,mrq);
++
++ ERR_MSG("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>",
++ result == 0 ? "PASS" : "FAIL",
++ cur_dsmpl, cur_wrrdly, cur_rxdly0);
++
++ if (result == 0) {
++ goto done;
++ }
++ else {
++ /* there is a case: command timeout, and data phase not processed */
++ if (mrq->data->error != (unsigned int)(-EIO)) {
++ ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
++ result, mrq->cmd->error, mrq->data->error);
++ goto done;
++ }
++ }
++ }
++ cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);
++ } while (++wrrdly < 32);
++
++ cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
++ cur_dat1 = orig_dat1;
++ cur_dat2 = orig_dat2;
++ cur_dat3 = orig_dat3;
++
++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++ } while (++rxdly < 32);
++
++done:
++ return result;
++}
++
++static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
++{
++ struct mmc_command cmd;
++ struct mmc_request mrq;
++ u32 err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++ cmd.opcode = MMC_SEND_STATUS;
++ if (mmc->card) {
++ cmd.arg = mmc->card->rca << 16;
++ } else {
++ ERR_MSG("cmd13 mmc card is null");
++ cmd.arg = host->app_cmd_arg;
++ }
++ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
++
++ memset(&mrq, 0, sizeof(struct mmc_request));
++ mrq.cmd = &cmd; cmd.mrq = &mrq;
++ cmd.data = NULL;
++
++ err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
++
++ if (status) {
++ *status = cmd.resp[0];
++ }
++
++ return err;
++}
++
++static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
++{
++ u32 err = 0;
++ u32 status = 0;
++
++ do {
++ err = msdc_get_card_status(mmc, host, &status);
++ if (err) return err;
++ /* need cmd12? */
++ ERR_MSG("cmd<13> resp<0x%x>", status);
++ } while (R1_CURRENT_STATE(status) == 7);
++
++ return err;
++}
++
++/* failed when msdc_do_request */
++static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ //u32 base = host->base;
++ int ret=0, read;
++
++ cmd = mrq->cmd;
++ data = mrq->cmd->data;
++
++ read = data->flags & MMC_DATA_READ ? 1 : 0;
++
++ if (read) {
++ if (data->error == (unsigned int)(-EIO)) {
++ ret = msdc_tune_bread(mmc,mrq);
++ }
++ } else {
++ ret = msdc_check_busy(mmc, host);
++ if (ret){
++ ERR_MSG("XXX cmd13 wait program done failed");
++ return ret;
++ }
++ /* CRC and TO */
++ /* Fix me: don't care card status? */
++ ret = msdc_tune_bwrite(mmc,mrq);
++ }
++
++ return ret;
++}
++
++/* ops.request */
++static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++
++ //=== for sdio profile ===
++#if 0 /* --- by chhung */
++ u32 old_H32, old_L32, new_H32, new_L32;
++ u32 ticks = 0, opcode = 0, sizes = 0, bRx = 0;
++#endif /* end of --- */
++
++ if(host->mrq){
++ ERR_MSG("XXX host->mrq<0x%.8x>", (int)host->mrq);
++ BUG();
++ }
++
++ if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
++ ERR_MSG("cmd<%d> card<%d> power<%d>", mrq->cmd->opcode, is_card_present(host), host->power_mode);
++ mrq->cmd->error = (unsigned int)-ENOMEDIUM;
++
++#if 1
++ mrq->done(mrq); // call done directly.
++#else
++ mrq->cmd->retries = 0; // please don't retry.
++ mmc_request_done(mmc, mrq);
++#endif
++
++ return;
++ }
++
++ /* start to process */
++ spin_lock(&host->lock);
++#if 0 /* --- by chhung */
++ if (sdio_pro_enable) { //=== for sdio profile ===
++ if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
++ GPT_GetCounter64(&old_L32, &old_H32);
++ }
++ }
++#endif /* end of --- */
++
++ host->mrq = mrq;
++
++ if (msdc_do_request(mmc,mrq)) {
++ if(host->hw->flags & MSDC_REMOVABLE && ralink_soc == MT762X_SOC_MT7621AT && mrq->data && mrq->data->error) {
++ msdc_tune_request(mmc,mrq);
++ }
++ }
++
++ /* ==== when request done, check if app_cmd ==== */
++ if (mrq->cmd->opcode == MMC_APP_CMD) {
++ host->app_cmd = 1;
++ host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */
++ } else {
++ host->app_cmd = 0;
++ //host->app_cmd_arg = 0;
++ }
++
++ host->mrq = NULL;
++
++#if 0 /* --- by chhung */
++ //=== for sdio profile ===
++ if (sdio_pro_enable) {
++ if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
++ GPT_GetCounter64(&new_L32, &new_H32);
++ ticks = msdc_time_calc(old_L32, old_H32, new_L32, new_H32);
++
++ opcode = mrq->cmd->opcode;
++ if (mrq->cmd->data) {
++ sizes = mrq->cmd->data->blocks * mrq->cmd->data->blksz;
++ bRx = mrq->cmd->data->flags & MMC_DATA_READ ? 1 : 0 ;
++ } else {
++ bRx = mrq->cmd->arg & 0x80000000 ? 1 : 0;
++ }
++
++ if (!mrq->cmd->error) {
++ msdc_performance(opcode, sizes, bRx, ticks);
++ }
++ }
++ }
++#endif /* end of --- */
++ spin_unlock(&host->lock);
++
++ mmc_request_done(mmc, mrq);
++
++ return;
++}
++
++/* called by ops.set_ios */
++static void msdc_set_buswidth(struct msdc_host *host, u32 width)
++{
++ u32 base = host->base;
++ u32 val = sdr_read32(SDC_CFG);
++
++ val &= ~SDC_CFG_BUSWIDTH;
++
++ switch (width) {
++ default:
++ case MMC_BUS_WIDTH_1:
++ width = 1;
++ val |= (MSDC_BUS_1BITS << 16);
++ break;
++ case MMC_BUS_WIDTH_4:
++ val |= (MSDC_BUS_4BITS << 16);
++ break;
++ case MMC_BUS_WIDTH_8:
++ val |= (MSDC_BUS_8BITS << 16);
++ break;
++ }
++
++ sdr_write32(SDC_CFG, val);
++
++ N_MSG(CFG, "Bus Width = %d", width);
++}
++
++/* ops.set_ios */
++static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct msdc_hw *hw=host->hw;
++ u32 base = host->base;
++ u32 ddr = 0;
++
++#ifdef MT6575_SD_DEBUG
++ static char *vdd[] = {
++ "1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
++ "2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
++ "2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
++ "3.40v", "3.50v", "3.60v"
++ };
++ static char *power_mode[] = {
++ "OFF", "UP", "ON"
++ };
++ static char *bus_mode[] = {
++ "UNKNOWN", "OPENDRAIN", "PUSHPULL"
++ };
++ static char *timing[] = {
++ "LEGACY", "MMC_HS", "SD_HS"
++ };
++
++ printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)",
++ ios->clock / 1000, bus_mode[ios->bus_mode],
++ (ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
++ power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);
++#endif
++
++ msdc_set_buswidth(host, ios->bus_width);
++
++ /* Power control ??? */
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ case MMC_POWER_UP:
++ // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
++ break;
++ case MMC_POWER_ON:
++ host->power_mode = MMC_POWER_ON;
++ break;
++ default:
++ break;
++ }
++
++ /* Clock control */
++ if (host->mclk != ios->clock) {
++ if(ios->clock > 25000000) {
++ //if (!(host->hw->flags & MSDC_REMOVABLE)) {
++ INIT_MSG("SD data latch edge<%d>", hw->data_edge);
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
++ //} /* for tuning debug */
++ } else { /* default value */
++ sdr_write32(MSDC_IOCON, 0x00000000);
++ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
++ }
++ msdc_set_mclk(host, ddr, ios->clock);
++ }
++}
++
++/* ops.get_ro */
++static int msdc_ops_get_ro(struct mmc_host *mmc)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ unsigned long flags;
++ int ro = 0;
++
++ if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
++ spin_lock_irqsave(&host->lock, flags);
++ ro = (sdr_read32(MSDC_PS) >> 31);
++ spin_unlock_irqrestore(&host->lock, flags);
++ }
++ return ro;
++}
++
++/* ops.get_cd */
++static int msdc_ops_get_cd(struct mmc_host *mmc)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ unsigned long flags;
++ int present = 1;
++
++ /* for sdio, MSDC_REMOVABLE not set, always return 1 */
++ if (!(host->hw->flags & MSDC_REMOVABLE)) {
++ /* For sdio, read H/W always get<1>, but may timeout some times */
++#if 1
++ host->card_inserted = 1;
++ return 1;
++#else
++ host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
++ INIT_MSG("sdio ops_get_cd<%d>", host->card_inserted);
++ return host->card_inserted;
++#endif
++ }
++
++ /* MSDC_CD_PIN_EN set for card */
++ if (host->hw->flags & MSDC_CD_PIN_EN) {
++ spin_lock_irqsave(&host->lock, flags);
++#if 0
++ present = host->card_inserted; /* why not read from H/W: Fix me*/
++#else
++ // CD
++ if (cd_active_low)
++ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
++ else
++ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 1 : 0;
++ host->card_inserted = present;
++#endif
++ spin_unlock_irqrestore(&host->lock, flags);
++ } else {
++ present = 0; /* TODO? Check DAT3 pins for card detection */
++ }
++
++ INIT_MSG("ops_get_cd return<%d>", present);
++ return present;
++}
++
++/* ops.enable_sdio_irq */
++static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ u32 tmp;
++
++ if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
++ if (enable) {
++ hw->enable_sdio_eirq(); /* combo_sdio_enable_eirq */
++ } else {
++ hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
++ }
++ } else {
++ ERR_MSG("XXX "); /* so never enter here */
++ tmp = sdr_read32(SDC_CFG);
++ /* FIXME. Need to interrupt gap detection */
++ if (enable) {
++ tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++ } else {
++ tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++ }
++ sdr_write32(SDC_CFG, tmp);
++ }
++}
++
++static struct mmc_host_ops mt_msdc_ops = {
++ .request = msdc_ops_request,
++ .set_ios = msdc_ops_set_ios,
++ .get_ro = msdc_ops_get_ro,
++ .get_cd = msdc_ops_get_cd,
++ .enable_sdio_irq = msdc_ops_enable_sdio_irq,
++};
++
++/*--------------------------------------------------------------------------*/
++/* interrupt handler */
++/*--------------------------------------------------------------------------*/
++static irqreturn_t msdc_irq(int irq, void *dev_id)
++{
++ struct msdc_host *host = (struct msdc_host *)dev_id;
++ struct mmc_data *data = host->data;
++ struct mmc_command *cmd = host->cmd;
++ u32 base = host->base;
++
++ u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY |
++ MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
++ MSDC_INT_ACMD19_DONE;
++ u32 datsts = MSDC_INT_DATCRCERR |MSDC_INT_DATTMO;
++
++ u32 intsts = sdr_read32(MSDC_INT);
++ u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
++
++ sdr_write32(MSDC_INT, intsts); /* clear interrupts */
++ /* MSG will cause fatal error */
++
++ /* card change interrupt */
++ if (intsts & MSDC_INT_CDSC){
++ if (mtk_sw_poll)
++ return IRQ_HANDLED;
++ IRQ_MSG("MSDC_INT_CDSC irq<0x%.8x>", intsts);
++#if 0 /* ---/+++ by chhung: fix slot mechanical bounce issue */
++ tasklet_hi_schedule(&host->card_tasklet);
++#else
++ schedule_delayed_work(&host->card_delaywork, HZ);
++#endif
++ /* tuning when plug card ? */
++ }
++
++ /* sdio interrupt */
++ if (intsts & MSDC_INT_SDIOIRQ){
++ IRQ_MSG("XXX MSDC_INT_SDIOIRQ"); /* seems not sdio irq */
++ //mmc_signal_sdio_irq(host->mmc);
++ }
++
++ /* transfer complete interrupt */
++ if (data != NULL) {
++ if (inten & MSDC_INT_XFER_COMPL) {
++ data->bytes_xfered = host->dma.xfersz;
++ complete(&host->xfer_done);
++ }
++
++ if (intsts & datsts) {
++ /* do basic reset, or stop command will sdc_busy */
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ atomic_set(&host->abort, 1); /* For PIO mode exit */
++
++ if (intsts & MSDC_INT_DATTMO){
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_DATTMO", host->mrq->cmd->opcode);
++ data->error = (unsigned int)-ETIMEDOUT;
++ }
++ else if (intsts & MSDC_INT_DATCRCERR){
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
++ data->error = (unsigned int)-EIO;
++ }
++
++ //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
++ if (host->dma_xfer) {
++ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
++ } /* PIO mode can't do complete, because not init */
++ }
++ }
++
++ /* command interrupts */
++ if ((cmd != NULL) && (intsts & cmdsts)) {
++ if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) ||
++ (intsts & MSDC_INT_ACMD19_DONE)) {
++ u32 *rsp = &cmd->resp[0];
++
++ switch (host->cmd_rsp) {
++ case RESP_NONE:
++ break;
++ case RESP_R2:
++ *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
++ *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
++ break;
++ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
++ if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
++ *rsp = sdr_read32(SDC_ACMD_RESP);
++ } else {
++ *rsp = sdr_read32(SDC_RESP0);
++ }
++ break;
++ }
++ } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
++ if(intsts & MSDC_INT_ACMDCRCERR){
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDCRCERR",cmd->opcode);
++ }
++ else {
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_RSPCRCERR",cmd->opcode);
++ }
++ cmd->error = (unsigned int)-EIO;
++ } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
++ if(intsts & MSDC_INT_ACMDTMO){
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDTMO",cmd->opcode);
++ }
++ else {
++ IRQ_MSG("XXX CMD<%d> MSDC_INT_CMDTMO",cmd->opcode);
++ }
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ complete(&host->cmd_done);
++ }
++
++ /* mmc irq interrupts */
++ if (intsts & MSDC_INT_MMCIRQ) {
++ printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
++ }
++
++#ifdef MT6575_SD_DEBUG
++ {
++ msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
++ N_MSG(INT, "IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)",
++ intsts,
++ int_reg->mmcirq,
++ int_reg->cdsc,
++ int_reg->atocmdrdy,
++ int_reg->atocmdtmo,
++ int_reg->atocmdcrc,
++ int_reg->atocmd19done);
++ N_MSG(INT, "IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)",
++ intsts,
++ int_reg->sdioirq,
++ int_reg->cmdrdy,
++ int_reg->cmdtmo,
++ int_reg->rspcrc,
++ int_reg->csta);
++ N_MSG(INT, "IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)",
++ intsts,
++ int_reg->xfercomp,
++ int_reg->dxferdone,
++ int_reg->dattmo,
++ int_reg->datcrc,
++ int_reg->dmaqempty);
++
++ }
++#endif
++
++ return IRQ_HANDLED;
++}
++
++/*--------------------------------------------------------------------------*/
++/* platform_driver members */
++/*--------------------------------------------------------------------------*/
++/* called by msdc_drv_probe/remove */
++static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
++{
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++
++ /* for sdio, not set */
++ if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
++ /* Pull down card detection pin since it is not avaiable */
++ /*
++ if (hw->config_gpio_pin)
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++ */
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++ return;
++ }
++
++ N_MSG(CFG, "CD IRQ Eanable(%d)", enable);
++
++ if (enable) {
++ if (hw->enable_cd_eirq) { /* not set, never enter */
++ hw->enable_cd_eirq();
++ } else {
++ /* card detection circuit relies on the core power so that the core power
++ * shouldn't be turned off. Here adds a reference count to keep
++ * the core power alive.
++ */
++ //msdc_vcore_on(host); //did in msdc_init_hw()
++
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
++
++ sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
++ sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++ sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */
++ }
++ } else {
++ if (hw->disable_cd_eirq) {
++ hw->disable_cd_eirq();
++ } else {
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++
++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++
++ /* Here decreases a reference count to core power since card
++ * detection circuit is shutdown.
++ */
++ //msdc_vcore_off(host);
++ }
++ }
++}
++
++/* called by msdc_drv_probe */
++static void msdc_init_hw(struct msdc_host *host)
++{
++ u32 base = host->base;
++ struct msdc_hw *hw = host->hw;
++
++#ifdef MT6575_SD_DEBUG
++ msdc_reg[host->id] = (struct msdc_regs *)host->base;
++#endif
++
++ /* Power on */
++#if 0 /* --- by chhung */
++ msdc_vcore_on(host);
++ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
++ msdc_select_clksrc(host, hw->clk_src);
++ enable_clock(PERI_MSDC0_PDN + host->id, "SD");
++ msdc_vdd_on(host);
++#endif /* end of --- */
++ /* Configure to MMC/SD mode */
++ sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
++
++ /* Reset */
++ msdc_reset();
++ msdc_clr_fifo();
++
++ /* Disable card detection */
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++
++ /* Disable and clear all interrupts */
++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++#if 1
++ /* reset tuning parameter */
++ sdr_write32(MSDC_PAD_CTL0, 0x00090000);
++ sdr_write32(MSDC_PAD_CTL1, 0x000A0000);
++ sdr_write32(MSDC_PAD_CTL2, 0x000A0000);
++ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
++ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++ sdr_write32(MSDC_IOCON, 0x00000000);
++#if 0 // use MT7620 default value: 0x403c004f
++ sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
++#endif
++
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ if (host->id == 1) {
++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
++
++ /* internal clock: latch read data */
++ sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);
++ }
++ }
++#endif
++
++ /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in
++ pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
++ set when kernel driver wants to use SDIO bus interrupt */
++ /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
++ sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
++
++ /* disable detect SDIO device interupt function */
++ sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
++
++ /* eneable SMT for glitch filter */
++ sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
++ sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
++ sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
++
++#if 1
++ /* set clk, cmd, dat pad driving */
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
++#else
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
++#endif
++
++ /* set sampling edge */
++
++ /* write crc timeout detection */
++ sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
++
++ /* Configure to default data timeout */
++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
++
++ msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
++
++ N_MSG(FUC, "init hardware done!");
++}
++
++/* called by msdc_drv_remove */
++static void msdc_deinit_hw(struct msdc_host *host)
++{
++ u32 base = host->base;
++
++ /* Disable and clear all interrupts */
++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++ /* Disable card detection */
++ msdc_enable_cd_irq(host, 0);
++ // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
++}
++
++/* init gpd and bd list in msdc_drv_probe */
++static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
++{
++ gpd_t *gpd = dma->gpd;
++ bd_t *bd = dma->bd;
++ bd_t *ptr, *prev;
++
++ /* we just support one gpd */
++ int bdlen = MAX_BD_PER_GPD;
++
++ /* init the 2 gpd */
++ memset(gpd, 0, sizeof(gpd_t) * 2);
++ //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */
++ //gpd->next = (dma->gpd_addr + 1); /* bug */
++ gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));
++
++ //gpd->intr = 0;
++ gpd->bdp = 1; /* hwo, cs, bd pointer */
++ //gpd->ptr = (void*)virt_to_phys(bd);
++ gpd->ptr = (void *)dma->bd_addr; /* physical address */
++
++ memset(bd, 0, sizeof(bd_t) * bdlen);
++ ptr = bd + bdlen - 1;
++ //ptr->eol = 1; /* 0 or 1 [Fix me]*/
++ //ptr->next = 0;
++
++ while (ptr != bd) {
++ prev = ptr - 1;
++ prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
++ ptr = prev;
++ }
++}
++
++static int msdc_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ __iomem void *base;
++ struct mmc_host *mmc;
++ struct resource *mem;
++ struct msdc_host *host;
++ struct msdc_hw *hw;
++ int ret, irq;
++
++ pdev->dev.platform_data = &msdc0_hw;
++
++ if (of_property_read_bool(pdev->dev.of_node, "mtk,wp-en"))
++ msdc0_hw.flags |= MSDC_WP_PIN_EN;
++
++ /* Allocate MMC host for this device */
++ mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
++ if (!mmc) return -ENOMEM;
++
++ hw = (struct msdc_hw*)pdev->dev.platform_data;
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irq = platform_get_irq(pdev, 0);
++
++ //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
++
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ /* Set host parameters to mmc */
++ mmc->ops = &mt_msdc_ops;
++ mmc->f_min = HOST_MIN_MCLK;
++ mmc->f_max = HOST_MAX_MCLK;
++ mmc->ocr_avail = MSDC_OCR_AVAIL;
++
++ /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++ For sdio : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
++ if (hw->flags & MSDC_HIGHSPEED) {
++ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
++ }
++ if (hw->data_pins == 4) { /* current data_pins are all 4*/
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++ } else if (hw->data_pins == 8) {
++ mmc->caps |= MMC_CAP_8_BIT_DATA;
++ }
++ if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
++ mmc->caps |= MMC_CAP_SDIO_IRQ; /* yes for sdio */
++
++ cd_active_low = !of_property_read_bool(pdev->dev.of_node, "mediatek,cd-high");
++ mtk_sw_poll = of_property_read_bool(pdev->dev.of_node, "mediatek,cd-poll");
++
++ if (mtk_sw_poll)
++ mmc->caps |= MMC_CAP_NEEDS_POLL;
++
++ /* MMC core transfer sizes tunable parameters */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(3,10,0)
++ mmc->max_segs = MAX_HW_SGMTS;
++#else
++ mmc->max_hw_segs = MAX_HW_SGMTS;
++ mmc->max_phys_segs = MAX_PHY_SGMTS;
++#endif
++ mmc->max_seg_size = MAX_SGMT_SZ;
++ mmc->max_blk_size = HOST_MAX_BLKSZ;
++ mmc->max_req_size = MAX_REQ_SZ;
++ mmc->max_blk_count = mmc->max_req_size;
++
++ host = mmc_priv(mmc);
++ host->hw = hw;
++ host->mmc = mmc;
++ host->id = pdev->id;
++ host->error = 0;
++ host->irq = irq;
++ host->base = (unsigned long) base;
++ host->mclk = 0; /* mclk: the request clock of mmc sub-system */
++ host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */
++ host->sclk = 0; /* sclk: the really clock after divition */
++ host->pm_state = PMSG_RESUME;
++ host->suspend = 0;
++ host->core_clkon = 0;
++ host->card_clkon = 0;
++ host->core_power = 0;
++ host->power_mode = MMC_POWER_OFF;
++// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
++ host->timeout_ns = 0;
++ host->timeout_clks = DEFAULT_DTOC * 65536;
++
++ host->mrq = NULL;
++ //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
++
++ host->dma.used_gpd = 0;
++ host->dma.used_bd = 0;
++
++ /* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */
++ host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL);
++ host->dma.bd = dma_alloc_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), &host->dma.bd_addr, GFP_KERNEL);
++ BUG_ON((!host->dma.gpd) || (!host->dma.bd));
++ msdc_init_gpd_bd(host, &host->dma);
++ /*for emmc*/
++ msdc_6575_host[pdev->id] = host;
++
++#if 0
++ tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
++#else
++ INIT_DELAYED_WORK(&host->card_delaywork, msdc_tasklet_card);
++#endif
++ spin_lock_init(&host->lock);
++ msdc_init_hw(host);
++
++ if (ralink_soc == MT762X_SOC_MT7621AT)
++ ret = request_irq((unsigned int)irq, msdc_irq, 0, dev_name(&pdev->dev), host);
++ else
++ ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
++
++ if (ret) goto release;
++ // mt65xx_irq_unmask(irq); /* --- by chhung */
++
++ if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
++ if (hw->request_cd_eirq) { /* not set for MT6575 */
++ hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
++ }
++ }
++
++ if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
++ hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
++
++ if (hw->register_pm) {/* yes for sdio */
++#ifdef CONFIG_PM
++ hw->register_pm(msdc_pm, (void*)host); /* combo_sdio_register_pm() */
++#endif
++ if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
++ ERR_MSG("MSDC_SYS_SUSPEND and register_pm both set");
++ }
++ //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
++ }
++
++ platform_set_drvdata(pdev, mmc);
++
++ ret = mmc_add_host(mmc);
++ if (ret) goto free_irq;
++
++ /* Config card detection pin and enable interrupts */
++ if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */
++ msdc_enable_cd_irq(host, 1);
++ } else {
++ msdc_enable_cd_irq(host, 0);
++ }
++
++ return 0;
++
++free_irq:
++ free_irq(irq, host);
++release:
++ platform_set_drvdata(pdev, NULL);
++ msdc_deinit_hw(host);
++
++#if 0
++ tasklet_kill(&host->card_tasklet);
++#else
++ cancel_delayed_work_sync(&host->card_delaywork);
++#endif
++
++ if (mem)
++ release_mem_region(mem->start, mem->end - mem->start + 1);
++
++ mmc_free_host(mmc);
++
++ return ret;
++}
++
++/* 4 device share one driver, using "drvdata" to show difference */
++static int msdc_drv_remove(struct platform_device *pdev)
++{
++ struct mmc_host *mmc;
++ struct msdc_host *host;
++ struct resource *mem;
++
++ mmc = platform_get_drvdata(pdev);
++ BUG_ON(!mmc);
++
++ host = mmc_priv(mmc);
++ BUG_ON(!host);
++
++ ERR_MSG("removed !!!");
++
++ platform_set_drvdata(pdev, NULL);
++ mmc_remove_host(host->mmc);
++ msdc_deinit_hw(host);
++
++#if 0
++ tasklet_kill(&host->card_tasklet);
++#else
++ cancel_delayed_work_sync(&host->card_delaywork);
++#endif
++ free_irq(host->irq, host);
++
++ dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
++ dma_free_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), host->dma.bd, host->dma.bd_addr);
++
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ if (mem)
++ release_mem_region(mem->start, mem->end - mem->start + 1);
++
++ mmc_free_host(host->mmc);
++
++ return 0;
++}
++
++/* Fix me: Power Flow */
++#ifdef CONFIG_PM
++static int msdc_drv_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ int ret = 0;
++ struct mmc_host *mmc = platform_get_drvdata(pdev);
++ struct msdc_host *host = mmc_priv(mmc);
++
++ if (mmc && state.event == PM_EVENT_SUSPEND && (host->hw->flags & MSDC_SYS_SUSPEND)) { /* will set for card */
++ msdc_pm(state, (void*)host);
++ }
++
++ return ret;
++}
++
++static int msdc_drv_resume(struct platform_device *pdev)
++{
++ int ret = 0;
++ struct mmc_host *mmc = platform_get_drvdata(pdev);
++ struct msdc_host *host = mmc_priv(mmc);
++ struct pm_message state;
++
++ state.event = PM_EVENT_RESUME;
++ if (mmc && (host->hw->flags & MSDC_SYS_SUSPEND)) {/* will set for card */
++ msdc_pm(state, (void*)host);
++ }
++
++ /* This mean WIFI not controller by PM */
++
++ return ret;
++}
++#endif
++
++static const struct of_device_id mt7620_sdhci_match[] = {
++ { .compatible = "ralink,mt7620-sdhci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++static struct platform_driver mt_msdc_driver = {
++ .probe = msdc_drv_probe,
++ .remove = msdc_drv_remove,
++#ifdef CONFIG_PM
++ .suspend = msdc_drv_suspend,
++ .resume = msdc_drv_resume,
++#endif
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = mt7620_sdhci_match,
++ },
++};
++
++/*--------------------------------------------------------------------------*/
++/* module init/exit */
++/*--------------------------------------------------------------------------*/
++static int __init mt_msdc_init(void)
++{
++ int ret;
++/* +++ by chhung */
++ u32 reg;
++
++#if defined (CONFIG_MTD_ANY_RALINK)
++ extern int ra_check_flash_type(void);
++ if(ra_check_flash_type() == 2) { /* NAND */
++ printk("%s: !!!!! SDXC Module Initialize Fail !!!!!", __func__);
++ return 0;
++ }
++#endif
++ printk("MTK MSDC device init.\n");
++ mtk_sd_device.dev.platform_data = &msdc0_hw;
++if (ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7621AT) {
++//#if defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3<<18);
++//#if defined (CONFIG_RALINK_MT7620)
++ if (ralink_soc == MT762X_SOC_MT7620A)
++ reg |= 0x1<<18;
++//#endif
++} else {
++//#elif defined (CONFIG_RALINK_MT7628)
++ /* TODO: maybe omitted when RAether already toggle AGPIO_CFG */
++ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x3c));
++ reg |= 0x1e << 16;
++ sdr_write32((volatile u32*)(RALINK_SYSCTL_BASE + 0x3c), reg);
++
++ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3<<10);
++#if defined (CONFIG_MTK_MMC_EMMC_8BIT)
++ reg |= 0x3<<26 | 0x3<<28 | 0x3<<30;
++ msdc0_hw.data_pins = 8,
++#endif
++//#endif
++}
++ sdr_write32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60), reg);
++ //platform_device_register(&mtk_sd_device);
++/* end of +++ */
++
++ ret = platform_driver_register(&mt_msdc_driver);
++ if (ret) {
++ printk(KERN_ERR DRV_NAME ": Can't register driver");
++ return ret;
++ }
++ printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
++
++#if defined (MT6575_SD_DEBUG)
++ msdc_debug_proc_init();
++#endif
++ return 0;
++}
++
++static void __exit mt_msdc_exit(void)
++{
++// platform_device_unregister(&mtk_sd_device);
++ platform_driver_unregister(&mt_msdc_driver);
++}
++
++module_init(mt_msdc_init);
++module_exit(mt_msdc_exit);
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
++MODULE_AUTHOR("Infinity Chen <infinity.chen at mediatek.com>");
++
++EXPORT_SYMBOL(msdc_6575_host);
diff --git a/target/linux/ramips/patches-4.9/0047-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-4.9/0047-DMA-ralink-add-rt2880-dma-engine.patch
new file mode 100644
index 0000000..9b45cf4
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0047-DMA-ralink-add-rt2880-dma-engine.patch
@@ -0,0 +1,1757 @@
+From f1c4d9e622c800e1f38b3818f933ec7597d1ccfb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:29:51 +0100
+Subject: [PATCH 47/53] DMA: ralink: add rt2880 dma engine
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/dma/Kconfig | 6 +
+ drivers/dma/Makefile | 1 +
+ drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
+ include/linux/dmaengine.h | 1 +
+ 4 files changed, 585 insertions(+)
+ create mode 100644 drivers/dma/ralink-gdma.c
+
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -40,6 +40,18 @@ config ASYNC_TX_ENABLE_CHANNEL_SWITCH
+ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+ bool
+
++config DMA_RALINK
++ tristate "RALINK DMA support"
++ depends on RALINK && !SOC_RT288X
++ select DMA_ENGINE
++ select DMA_VIRTUAL_CHANNELS
++
++config MTK_HSDMA
++ tristate "MTK HSDMA support"
++ depends on RALINK && SOC_MT7621
++ select DMA_ENGINE
++ select DMA_VIRTUAL_CHANNELS
++
+ config DMA_ENGINE
+ bool
+
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -67,6 +67,8 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-
+ obj-$(CONFIG_TI_EDMA) += edma.o
+ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
+ obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
++obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
++obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
+
+ obj-y += qcom/
+ obj-y += xilinx/
+--- /dev/null
++++ b/drivers/dma/ralink-gdma.c
+@@ -0,0 +1,928 @@
++/*
++ * Copyright (C) 2013, Lars-Peter Clausen <lars at metafoo.de>
++ * GDMA4740 DMAC support
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/of_dma.h>
++#include <linux/reset.h>
++#include <linux/of_device.h>
++
++#include "virt-dma.h"
++
++#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
++#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
++
++#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
++#define GDMA_REG_CTRL0_TX_MASK 0xffff
++#define GDMA_REG_CTRL0_TX_SHIFT 16
++#define GDMA_REG_CTRL0_CURR_MASK 0xff
++#define GDMA_REG_CTRL0_CURR_SHIFT 8
++#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
++#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
++#define GDMA_REG_CTRL0_BURST_MASK 0x7
++#define GDMA_REG_CTRL0_BURST_SHIFT 3
++#define GDMA_REG_CTRL0_DONE_INT BIT(2)
++#define GDMA_REG_CTRL0_ENABLE BIT(1)
++#define GDMA_REG_CTRL0_SW_MODE BIT(0)
++
++#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
++#define GDMA_REG_CTRL1_SEG_MASK 0xf
++#define GDMA_REG_CTRL1_SEG_SHIFT 22
++#define GDMA_REG_CTRL1_REQ_MASK 0x3f
++#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
++#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
++#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
++#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
++#define GDMA_REG_CTRL1_NEXT_SHIFT 3
++#define GDMA_REG_CTRL1_COHERENT BIT(2)
++#define GDMA_REG_CTRL1_FAIL BIT(1)
++#define GDMA_REG_CTRL1_MASK BIT(0)
++
++#define GDMA_REG_UNMASK_INT 0x200
++#define GDMA_REG_DONE_INT 0x204
++
++#define GDMA_REG_GCT 0x220
++#define GDMA_REG_GCT_CHAN_MASK 0x3
++#define GDMA_REG_GCT_CHAN_SHIFT 3
++#define GDMA_REG_GCT_VER_MASK 0x3
++#define GDMA_REG_GCT_VER_SHIFT 1
++#define GDMA_REG_GCT_ARBIT_RR BIT(0)
++
++#define GDMA_REG_REQSTS 0x2a0
++#define GDMA_REG_ACKSTS 0x2a4
++#define GDMA_REG_FINSTS 0x2a8
++
++/* for RT305X gdma registers */
++#define GDMA_RT305X_CTRL0_REQ_MASK 0xf
++#define GDMA_RT305X_CTRL0_SRC_REQ_SHIFT 12
++#define GDMA_RT305X_CTRL0_DST_REQ_SHIFT 8
++
++#define GDMA_RT305X_CTRL1_FAIL BIT(4)
++#define GDMA_RT305X_CTRL1_NEXT_MASK 0x7
++#define GDMA_RT305X_CTRL1_NEXT_SHIFT 1
++
++#define GDMA_RT305X_STATUS_INT 0x80
++#define GDMA_RT305X_STATUS_SIGNAL 0x84
++#define GDMA_RT305X_GCT 0x88
++
++/* for MT7621 gdma registers */
++#define GDMA_REG_PERF_START(x) (0x230 + (x) * 0x8)
++#define GDMA_REG_PERF_END(x) (0x234 + (x) * 0x8)
++
++enum gdma_dma_transfer_size {
++ GDMA_TRANSFER_SIZE_4BYTE = 0,
++ GDMA_TRANSFER_SIZE_8BYTE = 1,
++ GDMA_TRANSFER_SIZE_16BYTE = 2,
++ GDMA_TRANSFER_SIZE_32BYTE = 3,
++ GDMA_TRANSFER_SIZE_64BYTE = 4,
++};
++
++struct gdma_dma_sg {
++ dma_addr_t src_addr;
++ dma_addr_t dst_addr;
++ u32 len;
++};
++
++struct gdma_dma_desc {
++ struct virt_dma_desc vdesc;
++
++ enum dma_transfer_direction direction;
++ bool cyclic;
++
++ u32 residue;
++ unsigned int num_sgs;
++ struct gdma_dma_sg sg[];
++};
++
++struct gdma_dmaengine_chan {
++ struct virt_dma_chan vchan;
++ unsigned int id;
++ unsigned int slave_id;
++
++ dma_addr_t fifo_addr;
++ enum gdma_dma_transfer_size burst_size;
++
++ struct gdma_dma_desc *desc;
++ unsigned int next_sg;
++};
++
++struct gdma_dma_dev {
++ struct dma_device ddev;
++ struct device_dma_parameters dma_parms;
++ struct gdma_data *data;
++ void __iomem *base;
++ struct tasklet_struct task;
++ volatile unsigned long chan_issued;
++ atomic_t cnt;
++
++ struct gdma_dmaengine_chan chan[];
++};
++
++struct gdma_data
++{
++ int chancnt;
++ u32 done_int_reg;
++ void (*init)(struct gdma_dma_dev *dma_dev);
++ int (*start_transfer)(struct gdma_dmaengine_chan *chan);
++};
++
++static struct gdma_dma_dev *gdma_dma_chan_get_dev(
++ struct gdma_dmaengine_chan *chan)
++{
++ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
++ ddev);
++}
++
++static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
++{
++ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
++}
++
++static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
++{
++ return container_of(vdesc, struct gdma_dma_desc, vdesc);
++}
++
++static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
++ unsigned int reg)
++{
++ return readl(dma_dev->base + reg);
++}
++
++static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
++ unsigned reg, uint32_t val)
++{
++ writel(val, dma_dev->base + reg);
++}
++
++static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
++{
++ return kzalloc(sizeof(struct gdma_dma_desc) +
++ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
++}
++
++static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
++{
++ if (maxburst < 2)
++ return GDMA_TRANSFER_SIZE_4BYTE;
++ else if (maxburst < 4)
++ return GDMA_TRANSFER_SIZE_8BYTE;
++ else if (maxburst < 8)
++ return GDMA_TRANSFER_SIZE_16BYTE;
++ else if (maxburst < 16)
++ return GDMA_TRANSFER_SIZE_32BYTE;
++ else
++ return GDMA_TRANSFER_SIZE_64BYTE;
++}
++
++static int gdma_dma_config(struct dma_chan *c,
++ struct dma_slave_config *config)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++
++ if (config->device_fc) {
++ dev_err(dma_dev->ddev.dev, "not support flow controller\n");
++ return -EINVAL;
++ }
++
++ switch (config->direction) {
++ case DMA_MEM_TO_DEV:
++ if (config->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) {
++ dev_err(dma_dev->ddev.dev, "only support 4 byte buswidth\n");
++ return -EINVAL;
++ }
++ chan->slave_id = config->slave_id;
++ chan->fifo_addr = config->dst_addr;
++ chan->burst_size = gdma_dma_maxburst(config->dst_maxburst);
++ break;
++ case DMA_DEV_TO_MEM:
++ if (config->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) {
++ dev_err(dma_dev->ddev.dev, "only support 4 byte buswidth\n");
++ return -EINVAL;
++ }
++ chan->slave_id = config->slave_id;
++ chan->fifo_addr = config->src_addr;
++ chan->burst_size = gdma_dma_maxburst(config->src_maxburst);
++ break;
++ default:
++ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
++ config->direction);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int gdma_dma_terminate_all(struct dma_chan *c)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ unsigned long flags, timeout;
++ LIST_HEAD(head);
++ int i = 0;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ chan->desc = NULL;
++ clear_bit(chan->id, &dma_dev->chan_issued);
++ vchan_get_all_descriptors(&chan->vchan, &head);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ vchan_dma_desc_free_list(&chan->vchan, &head);
++
++ /* wait dma transfer complete */
++ timeout = jiffies + msecs_to_jiffies(5000);
++ while (gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id)) &
++ GDMA_REG_CTRL0_ENABLE) {
++ if (time_after_eq(jiffies, timeout)) {
++ dev_err(dma_dev->ddev.dev, "chan %d wait timeout\n",
++ chan->id);
++ /* restore to init value */
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), 0);
++ break;
++ }
++ cpu_relax();
++ i++;
++ }
++
++ if (i)
++ dev_dbg(dma_dev->ddev.dev, "terminate chan %d loops %d\n",
++ chan->id, i);
++
++ return 0;
++}
++
++static void rt305x_dump_reg(struct gdma_dma_dev *dma_dev, int id)
++{
++ dev_dbg(dma_dev->ddev.dev, "chan %d, src %08x, dst %08x, ctr0 %08x, " \
++ "ctr1 %08x, intr %08x, signal %08x\n", id,
++ gdma_dma_read(dma_dev, GDMA_REG_SRC_ADDR(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_DST_ADDR(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_CTRL0(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_CTRL1(id)),
++ gdma_dma_read(dma_dev, GDMA_RT305X_STATUS_INT),
++ gdma_dma_read(dma_dev, GDMA_RT305X_STATUS_SIGNAL));
++}
++
++static int rt305x_gdma_start_transfer(struct gdma_dmaengine_chan *chan)
++{
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ dma_addr_t src_addr, dst_addr;
++ struct gdma_dma_sg *sg;
++ uint32_t ctrl0, ctrl1;
++
++ /* verify chan is already stopped */
++ ctrl0 = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
++ if (unlikely(ctrl0 & GDMA_REG_CTRL0_ENABLE)) {
++ dev_err(dma_dev->ddev.dev, "chan %d is start(%08x).\n",
++ chan->id, ctrl0);
++ rt305x_dump_reg(dma_dev, chan->id);
++ return -EINVAL;
++ }
++
++ sg = &chan->desc->sg[chan->next_sg];
++ if (chan->desc->direction == DMA_MEM_TO_DEV) {
++ src_addr = sg->src_addr;
++ dst_addr = chan->fifo_addr;
++ ctrl0 = GDMA_REG_CTRL0_DST_ADDR_FIXED | \
++ (8 << GDMA_RT305X_CTRL0_SRC_REQ_SHIFT) | \
++ (chan->slave_id << GDMA_RT305X_CTRL0_DST_REQ_SHIFT);
++ } else if (chan->desc->direction == DMA_DEV_TO_MEM) {
++ src_addr = chan->fifo_addr;
++ dst_addr = sg->dst_addr;
++ ctrl0 = GDMA_REG_CTRL0_SRC_ADDR_FIXED | \
++ (chan->slave_id << GDMA_RT305X_CTRL0_SRC_REQ_SHIFT) | \
++ (8 << GDMA_RT305X_CTRL0_DST_REQ_SHIFT);
++ } else if (chan->desc->direction == DMA_MEM_TO_MEM) {
++ /*
++ * TODO: memcpy function have bugs. sometime it will copy
++ * more 8 bytes data when using dmatest verify.
++ */
++ src_addr = sg->src_addr;
++ dst_addr = sg->dst_addr;
++ ctrl0 = GDMA_REG_CTRL0_SW_MODE | \
++ (8 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
++ (8 << GDMA_REG_CTRL1_DST_REQ_SHIFT);
++ } else {
++ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
++ chan->desc->direction);
++ return -EINVAL;
++ }
++
++ ctrl0 |= (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | \
++ (chan->burst_size << GDMA_REG_CTRL0_BURST_SHIFT) | \
++ GDMA_REG_CTRL0_DONE_INT | GDMA_REG_CTRL0_ENABLE;
++ ctrl1 = chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
++
++ chan->next_sg++;
++ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
++ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
++
++ /* make sure next_sg is update */
++ wmb();
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
++
++ return 0;
++}
++
++static void rt3883_dump_reg(struct gdma_dma_dev *dma_dev, int id)
++{
++ dev_dbg(dma_dev->ddev.dev, "chan %d, src %08x, dst %08x, ctr0 %08x, " \
++ "ctr1 %08x, unmask %08x, done %08x, " \
++ "req %08x, ack %08x, fin %08x\n", id,
++ gdma_dma_read(dma_dev, GDMA_REG_SRC_ADDR(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_DST_ADDR(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_CTRL0(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_CTRL1(id)),
++ gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT),
++ gdma_dma_read(dma_dev, GDMA_REG_DONE_INT),
++ gdma_dma_read(dma_dev, GDMA_REG_REQSTS),
++ gdma_dma_read(dma_dev, GDMA_REG_ACKSTS),
++ gdma_dma_read(dma_dev, GDMA_REG_FINSTS));
++}
++
++static int rt3883_gdma_start_transfer(struct gdma_dmaengine_chan *chan)
++{
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ dma_addr_t src_addr, dst_addr;
++ struct gdma_dma_sg *sg;
++ uint32_t ctrl0, ctrl1;
++
++ /* verify chan is already stopped */
++ ctrl0 = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
++ if (unlikely(ctrl0 & GDMA_REG_CTRL0_ENABLE)) {
++ dev_err(dma_dev->ddev.dev, "chan %d is start(%08x).\n",
++ chan->id, ctrl0);
++ rt3883_dump_reg(dma_dev, chan->id);
++ return -EINVAL;
++ }
++
++ sg = &chan->desc->sg[chan->next_sg];
++ if (chan->desc->direction == DMA_MEM_TO_DEV) {
++ src_addr = sg->src_addr;
++ dst_addr = chan->fifo_addr;
++ ctrl0 = GDMA_REG_CTRL0_DST_ADDR_FIXED;
++ ctrl1 = (32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
++ (chan->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT);
++ } else if (chan->desc->direction == DMA_DEV_TO_MEM) {
++ src_addr = chan->fifo_addr;
++ dst_addr = sg->dst_addr;
++ ctrl0 = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
++ ctrl1 = (chan->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
++ (32 << GDMA_REG_CTRL1_DST_REQ_SHIFT) | \
++ GDMA_REG_CTRL1_COHERENT;
++ } else if (chan->desc->direction == DMA_MEM_TO_MEM) {
++ src_addr = sg->src_addr;
++ dst_addr = sg->dst_addr;
++ ctrl0 = GDMA_REG_CTRL0_SW_MODE;
++ ctrl1 = (32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT) | \
++ (32 << GDMA_REG_CTRL1_DST_REQ_SHIFT) | \
++ GDMA_REG_CTRL1_COHERENT;
++ } else {
++ dev_err(dma_dev->ddev.dev, "direction type %d error\n",
++ chan->desc->direction);
++ return -EINVAL;
++ }
++
++ ctrl0 |= (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | \
++ (chan->burst_size << GDMA_REG_CTRL0_BURST_SHIFT) | \
++ GDMA_REG_CTRL0_DONE_INT | GDMA_REG_CTRL0_ENABLE;
++ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
++
++ chan->next_sg++;
++ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
++ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
++
++ /* make sure next_sg is update */
++ wmb();
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
++
++ return 0;
++}
++
++static inline int gdma_start_transfer(struct gdma_dma_dev *dma_dev,
++ struct gdma_dmaengine_chan *chan)
++{
++ return dma_dev->data->start_transfer(chan);
++}
++
++static int gdma_next_desc(struct gdma_dmaengine_chan *chan)
++{
++ struct virt_dma_desc *vdesc;
++
++ vdesc = vchan_next_desc(&chan->vchan);
++ if (!vdesc) {
++ chan->desc = NULL;
++ return 0;
++ }
++ chan->desc = to_gdma_dma_desc(vdesc);
++ chan->next_sg = 0;
++
++ return 1;
++}
++
++static void gdma_dma_chan_irq(struct gdma_dma_dev *dma_dev,
++ struct gdma_dmaengine_chan *chan)
++{
++ struct gdma_dma_desc *desc;
++ unsigned long flags;
++ int chan_issued;
++
++ chan_issued = 0;
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ desc = chan->desc;
++ if (desc) {
++ if (desc->cyclic) {
++ vchan_cyclic_callback(&desc->vdesc);
++ if (chan->next_sg == desc->num_sgs)
++ chan->next_sg = 0;
++ chan_issued = 1;
++ } else {
++ desc->residue -= desc->sg[chan->next_sg - 1].len;
++ if (chan->next_sg == desc->num_sgs) {
++ list_del(&desc->vdesc.node);
++ vchan_cookie_complete(&desc->vdesc);
++ chan_issued = gdma_next_desc(chan);
++ } else
++ chan_issued = 1;
++ }
++ } else
++ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to complete\n",
++ chan->id);
++ if (chan_issued)
++ set_bit(chan->id, &dma_dev->chan_issued);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++}
++
++static irqreturn_t gdma_dma_irq(int irq, void *devid)
++{
++ struct gdma_dma_dev *dma_dev = devid;
++ u32 done, done_reg;
++ unsigned int i;
++
++ done_reg = dma_dev->data->done_int_reg;
++ done = gdma_dma_read(dma_dev, done_reg);
++ if (unlikely(!done))
++ return IRQ_NONE;
++
++ /* clean done bits */
++ gdma_dma_write(dma_dev, done_reg, done);
++
++ i = 0;
++ while (done) {
++ if (done & 0x1) {
++ gdma_dma_chan_irq(dma_dev, &dma_dev->chan[i]);
++ atomic_dec(&dma_dev->cnt);
++ }
++ done >>= 1;
++ i++;
++ }
++
++ /* start only have work to do */
++ if (dma_dev->chan_issued)
++ tasklet_schedule(&dma_dev->task);
++
++ return IRQ_HANDLED;
++}
++
++static void gdma_dma_issue_pending(struct dma_chan *c)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ unsigned long flags;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
++ if (gdma_next_desc(chan)) {
++ set_bit(chan->id, &dma_dev->chan_issued);
++ tasklet_schedule(&dma_dev->task);
++ } else
++ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to issue\n",
++ chan->id);
++ }
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++}
++
++static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
++ struct dma_chan *c, struct scatterlist *sgl,
++ unsigned int sg_len, enum dma_transfer_direction direction,
++ unsigned long flags, void *context)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_desc *desc;
++ struct scatterlist *sg;
++ unsigned int i;
++
++ desc = gdma_dma_alloc_desc(sg_len);
++ if (!desc) {
++ dev_err(c->device->dev, "alloc sg decs error\n");
++ return NULL;
++ }
++ desc->residue = 0;
++
++ for_each_sg(sgl, sg, sg_len, i) {
++ if (direction == DMA_MEM_TO_DEV)
++ desc->sg[i].src_addr = sg_dma_address(sg);
++ else if (direction == DMA_DEV_TO_MEM)
++ desc->sg[i].dst_addr = sg_dma_address(sg);
++ else {
++ dev_err(c->device->dev, "direction type %d error\n",
++ direction);
++ goto free_desc;
++ }
++
++ if (unlikely(sg_dma_len(sg) > GDMA_REG_CTRL0_TX_MASK)) {
++ dev_err(c->device->dev, "sg len too large %d\n",
++ sg_dma_len(sg));
++ goto free_desc;
++ }
++ desc->sg[i].len = sg_dma_len(sg);
++ desc->residue += sg_dma_len(sg);
++ }
++
++ desc->num_sgs = sg_len;
++ desc->direction = direction;
++ desc->cyclic = false;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++
++free_desc:
++ kfree(desc);
++ return NULL;
++}
++
++static struct dma_async_tx_descriptor * gdma_dma_prep_dma_memcpy(
++ struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
++ size_t len, unsigned long flags)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_desc *desc;
++ unsigned int num_periods, i;
++ size_t xfer_count;
++
++ if (len <= 0)
++ return NULL;
++
++ chan->burst_size = gdma_dma_maxburst(len >> 2);
++
++ xfer_count = GDMA_REG_CTRL0_TX_MASK;
++ num_periods = DIV_ROUND_UP(len, xfer_count);
++
++ desc = gdma_dma_alloc_desc(num_periods);
++ if (!desc) {
++ dev_err(c->device->dev, "alloc memcpy decs error\n");
++ return NULL;
++ }
++ desc->residue = len;
++
++ for (i = 0; i < num_periods; i++) {
++ desc->sg[i].src_addr = src;
++ desc->sg[i].dst_addr = dest;
++ if (len > xfer_count) {
++ desc->sg[i].len = xfer_count;
++ } else {
++ desc->sg[i].len = len;
++ }
++ src += desc->sg[i].len;
++ dest += desc->sg[i].len;
++ len -= desc->sg[i].len;
++ }
++
++ desc->num_sgs = num_periods;
++ desc->direction = DMA_MEM_TO_MEM;
++ desc->cyclic = false;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
++ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
++ size_t period_len, enum dma_transfer_direction direction,
++ unsigned long flags)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_desc *desc;
++ unsigned int num_periods, i;
++
++ if (buf_len % period_len)
++ return NULL;
++
++ if (period_len > GDMA_REG_CTRL0_TX_MASK) {
++ dev_err(c->device->dev, "cyclic len too large %d\n",
++ period_len);
++ return NULL;
++ }
++
++ num_periods = buf_len / period_len;
++ desc = gdma_dma_alloc_desc(num_periods);
++ if (!desc) {
++ dev_err(c->device->dev, "alloc cyclic decs error\n");
++ return NULL;
++ }
++ desc->residue = buf_len;
++
++ for (i = 0; i < num_periods; i++) {
++ if (direction == DMA_MEM_TO_DEV)
++ desc->sg[i].src_addr = buf_addr;
++ else if (direction == DMA_DEV_TO_MEM)
++ desc->sg[i].dst_addr = buf_addr;
++ else {
++ dev_err(c->device->dev, "direction type %d error\n",
++ direction);
++ goto free_desc;
++ }
++ desc->sg[i].len = period_len;
++ buf_addr += period_len;
++ }
++
++ desc->num_sgs = num_periods;
++ desc->direction = direction;
++ desc->cyclic = true;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++
++free_desc:
++ kfree(desc);
++ return NULL;
++}
++
++static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
++ dma_cookie_t cookie, struct dma_tx_state *state)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct virt_dma_desc *vdesc;
++ enum dma_status status;
++ unsigned long flags;
++ struct gdma_dma_desc *desc;
++
++ status = dma_cookie_status(c, cookie, state);
++ if (status == DMA_COMPLETE || !state)
++ return status;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ desc = chan->desc;
++ if (desc && (cookie == desc->vdesc.tx.cookie)) {
++ /*
++ * We never update edesc->residue in the cyclic case, so we
++ * can tell the remaining room to the end of the circular
++ * buffer.
++ */
++ if (desc->cyclic)
++ state->residue = desc->residue -
++ ((chan->next_sg - 1) * desc->sg[0].len);
++ else
++ state->residue = desc->residue;
++ } else if ((vdesc = vchan_find_desc(&chan->vchan, cookie)))
++ state->residue = to_gdma_dma_desc(vdesc)->residue;
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ dev_dbg(c->device->dev, "tx residue %d bytes\n", state->residue);
++
++ return status;
++}
++
++static void gdma_dma_free_chan_resources(struct dma_chan *c)
++{
++ vchan_free_chan_resources(to_virt_chan(c));
++}
++
++static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
++{
++ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
++}
++
++static void gdma_dma_tasklet(unsigned long arg)
++{
++ struct gdma_dma_dev *dma_dev = (struct gdma_dma_dev *)arg;
++ struct gdma_dmaengine_chan *chan;
++ static unsigned int last_chan;
++ unsigned int i, chan_mask;
++
++ /* record last chan to round robin all chans */
++ i = last_chan;
++ chan_mask = dma_dev->data->chancnt - 1;
++ do {
++ /*
++ * on mt7621. when verify with dmatest with all
++ * channel is enable. we need to limit only two
++ * channel is working at the same time. otherwise the
++ * data will have problem.
++ */
++ if (atomic_read(&dma_dev->cnt) >= 2) {
++ last_chan = i;
++ break;
++ }
++
++ if (test_and_clear_bit(i, &dma_dev->chan_issued)) {
++ chan = &dma_dev->chan[i];
++ if (chan->desc) {
++ atomic_inc(&dma_dev->cnt);
++ gdma_start_transfer(dma_dev, chan);
++ } else
++ dev_dbg(dma_dev->ddev.dev, "chan %d no desc to issue\n", chan->id);
++
++ if (!dma_dev->chan_issued)
++ break;
++ }
++
++ i = (i + 1) & chan_mask;
++ } while (i != last_chan);
++}
++
++static void rt305x_gdma_init(struct gdma_dma_dev *dma_dev)
++{
++ uint32_t gct;
++
++ /* all chans round robin */
++ gdma_dma_write(dma_dev, GDMA_RT305X_GCT, GDMA_REG_GCT_ARBIT_RR);
++
++ gct = gdma_dma_read(dma_dev, GDMA_RT305X_GCT);
++ dev_info(dma_dev->ddev.dev, "revision: %d, channels: %d\n",
++ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
++ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) &
++ GDMA_REG_GCT_CHAN_MASK));
++}
++
++static void rt3883_gdma_init(struct gdma_dma_dev *dma_dev)
++{
++ uint32_t gct;
++
++ /* all chans round robin */
++ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
++
++ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
++ dev_info(dma_dev->ddev.dev, "revision: %d, channels: %d\n",
++ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
++ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) &
++ GDMA_REG_GCT_CHAN_MASK));
++}
++
++static struct gdma_data rt305x_gdma_data = {
++ .chancnt = 8,
++ .done_int_reg = GDMA_RT305X_STATUS_INT,
++ .init = rt305x_gdma_init,
++ .start_transfer = rt305x_gdma_start_transfer,
++};
++
++static struct gdma_data rt3883_gdma_data = {
++ .chancnt = 16,
++ .done_int_reg = GDMA_REG_DONE_INT,
++ .init = rt3883_gdma_init,
++ .start_transfer = rt3883_gdma_start_transfer,
++};
++
++static const struct of_device_id gdma_of_match_table[] = {
++ { .compatible = "ralink,rt305x-gdma", .data = &rt305x_gdma_data },
++ { .compatible = "ralink,rt3883-gdma", .data = &rt3883_gdma_data },
++ { },
++};
++
++static int gdma_dma_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct gdma_dmaengine_chan *chan;
++ struct gdma_dma_dev *dma_dev;
++ struct dma_device *dd;
++ unsigned int i;
++ struct resource *res;
++ int ret;
++ int irq;
++ void __iomem *base;
++ struct gdma_data *data;
++
++ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
++ if (ret)
++ return ret;
++
++ match = of_match_device(gdma_of_match_table, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++ data = (struct gdma_data *) match->data;
++
++ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev) +
++ (sizeof(struct gdma_dmaengine_chan) * data->chancnt),
++ GFP_KERNEL);
++ if (!dma_dev) {
++ dev_err(&pdev->dev, "alloc dma device failed\n");
++ return -EINVAL;
++ }
++ dma_dev->data = data;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++ dma_dev->base = base;
++ tasklet_init(&dma_dev->task, gdma_dma_tasklet, (unsigned long)dma_dev);
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++ ret = devm_request_irq(&pdev->dev, irq, gdma_dma_irq,
++ 0, dev_name(&pdev->dev), dma_dev);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return ret;
++ }
++
++ device_reset(&pdev->dev);
++
++ dd = &dma_dev->ddev;
++ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
++ dma_cap_set(DMA_SLAVE, dd->cap_mask);
++ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
++ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
++ dd->device_prep_dma_memcpy = gdma_dma_prep_dma_memcpy;
++ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
++ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
++ dd->device_config = gdma_dma_config;
++ dd->device_terminate_all = gdma_dma_terminate_all;
++ dd->device_tx_status = gdma_dma_tx_status;
++ dd->device_issue_pending = gdma_dma_issue_pending;
++
++ dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
++ dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
++ dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
++ dd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
++
++ dd->dev = &pdev->dev;
++ dd->dev->dma_parms = &dma_dev->dma_parms;
++ dma_set_max_seg_size(dd->dev, GDMA_REG_CTRL0_TX_MASK);
++ INIT_LIST_HEAD(&dd->channels);
++
++ for (i = 0; i < data->chancnt; i++) {
++ chan = &dma_dev->chan[i];
++ chan->id = i;
++ chan->vchan.desc_free = gdma_dma_desc_free;
++ vchan_init(&chan->vchan, dd);
++ }
++
++ /* init hardware */
++ data->init(dma_dev);
++
++ ret = dma_async_device_register(dd);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to register dma device\n");
++ return ret;
++ }
++
++ ret = of_dma_controller_register(pdev->dev.of_node,
++ of_dma_xlate_by_chan_id, dma_dev);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to register of dma controller\n");
++ goto err_unregister;
++ }
++
++ platform_set_drvdata(pdev, dma_dev);
++
++ return 0;
++
++err_unregister:
++ dma_async_device_unregister(dd);
++ return ret;
++}
++
++static int gdma_dma_remove(struct platform_device *pdev)
++{
++ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
++
++ tasklet_kill(&dma_dev->task);
++ of_dma_controller_free(pdev->dev.of_node);
++ dma_async_device_unregister(&dma_dev->ddev);
++
++ return 0;
++}
++
++static struct platform_driver gdma_dma_driver = {
++ .probe = gdma_dma_probe,
++ .remove = gdma_dma_remove,
++ .driver = {
++ .name = "gdma-rt2880",
++ .of_match_table = gdma_of_match_table,
++ },
++};
++module_platform_driver(gdma_dma_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars at metafoo.de>");
++MODULE_DESCRIPTION("Ralink/MTK DMA driver");
++MODULE_LICENSE("GPL v2");
+--- a/include/linux/dmaengine.h
++++ b/include/linux/dmaengine.h
+@@ -514,6 +514,7 @@ static inline void dma_set_unmap(struct
+ struct dmaengine_unmap_data *
+ dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags);
+ void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap);
++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
+ #else
+ static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
+ struct dmaengine_unmap_data *unmap)
+--- /dev/null
++++ b/drivers/dma/mtk-hsdma.c
+@@ -0,0 +1,767 @@
++/*
++ * Copyright (C) 2015, Michael Lee <igvtee at gmail.com>
++ * MTK HSDMA support
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/of_dma.h>
++#include <linux/reset.h>
++#include <linux/of_device.h>
++
++#include "virt-dma.h"
++
++#define HSDMA_BASE_OFFSET 0x800
++
++#define HSDMA_REG_TX_BASE 0x00
++#define HSDMA_REG_TX_CNT 0x04
++#define HSDMA_REG_TX_CTX 0x08
++#define HSDMA_REG_TX_DTX 0x0c
++#define HSDMA_REG_RX_BASE 0x100
++#define HSDMA_REG_RX_CNT 0x104
++#define HSDMA_REG_RX_CRX 0x108
++#define HSDMA_REG_RX_DRX 0x10c
++#define HSDMA_REG_INFO 0x200
++#define HSDMA_REG_GLO_CFG 0x204
++#define HSDMA_REG_RST_CFG 0x208
++#define HSDMA_REG_DELAY_INT 0x20c
++#define HSDMA_REG_FREEQ_THRES 0x210
++#define HSDMA_REG_INT_STATUS 0x220
++#define HSDMA_REG_INT_MASK 0x228
++#define HSDMA_REG_SCH_Q01 0x280
++#define HSDMA_REG_SCH_Q23 0x284
++
++#define HSDMA_DESCS_MAX 0xfff
++#define HSDMA_DESCS_NUM 8
++#define HSDMA_DESCS_MASK (HSDMA_DESCS_NUM - 1)
++#define HSDMA_NEXT_DESC(x) (((x) + 1) & HSDMA_DESCS_MASK)
++
++/* HSDMA_REG_INFO */
++#define HSDMA_INFO_INDEX_MASK 0xf
++#define HSDMA_INFO_INDEX_SHIFT 24
++#define HSDMA_INFO_BASE_MASK 0xff
++#define HSDMA_INFO_BASE_SHIFT 16
++#define HSDMA_INFO_RX_MASK 0xff
++#define HSDMA_INFO_RX_SHIFT 8
++#define HSDMA_INFO_TX_MASK 0xff
++#define HSDMA_INFO_TX_SHIFT 0
++
++/* HSDMA_REG_GLO_CFG */
++#define HSDMA_GLO_TX_2B_OFFSET BIT(31)
++#define HSDMA_GLO_CLK_GATE BIT(30)
++#define HSDMA_GLO_BYTE_SWAP BIT(29)
++#define HSDMA_GLO_MULTI_DMA BIT(10)
++#define HSDMA_GLO_TWO_BUF BIT(9)
++#define HSDMA_GLO_32B_DESC BIT(8)
++#define HSDMA_GLO_BIG_ENDIAN BIT(7)
++#define HSDMA_GLO_TX_DONE BIT(6)
++#define HSDMA_GLO_BT_MASK 0x3
++#define HSDMA_GLO_BT_SHIFT 4
++#define HSDMA_GLO_RX_BUSY BIT(3)
++#define HSDMA_GLO_RX_DMA BIT(2)
++#define HSDMA_GLO_TX_BUSY BIT(1)
++#define HSDMA_GLO_TX_DMA BIT(0)
++
++#define HSDMA_BT_SIZE_16BYTES (0 << HSDMA_GLO_BT_SHIFT)
++#define HSDMA_BT_SIZE_32BYTES (1 << HSDMA_GLO_BT_SHIFT)
++#define HSDMA_BT_SIZE_64BYTES (2 << HSDMA_GLO_BT_SHIFT)
++#define HSDMA_BT_SIZE_128BYTES (3 << HSDMA_GLO_BT_SHIFT)
++
++#define HSDMA_GLO_DEFAULT (HSDMA_GLO_MULTI_DMA | \
++ HSDMA_GLO_RX_DMA | HSDMA_GLO_TX_DMA | HSDMA_BT_SIZE_32BYTES)
++
++/* HSDMA_REG_RST_CFG */
++#define HSDMA_RST_RX_SHIFT 16
++#define HSDMA_RST_TX_SHIFT 0
++
++/* HSDMA_REG_DELAY_INT */
++#define HSDMA_DELAY_INT_EN BIT(15)
++#define HSDMA_DELAY_PEND_OFFSET 8
++#define HSDMA_DELAY_TIME_OFFSET 0
++#define HSDMA_DELAY_TX_OFFSET 16
++#define HSDMA_DELAY_RX_OFFSET 0
++
++#define HSDMA_DELAY_INIT(x) (HSDMA_DELAY_INT_EN | \
++ ((x) << HSDMA_DELAY_PEND_OFFSET))
++#define HSDMA_DELAY(x) ((HSDMA_DELAY_INIT(x) << \
++ HSDMA_DELAY_TX_OFFSET) | HSDMA_DELAY_INIT(x))
++
++/* HSDMA_REG_INT_STATUS */
++#define HSDMA_INT_DELAY_RX_COH BIT(31)
++#define HSDMA_INT_DELAY_RX_INT BIT(30)
++#define HSDMA_INT_DELAY_TX_COH BIT(29)
++#define HSDMA_INT_DELAY_TX_INT BIT(28)
++#define HSDMA_INT_RX_MASK 0x3
++#define HSDMA_INT_RX_SHIFT 16
++#define HSDMA_INT_RX_Q0 BIT(16)
++#define HSDMA_INT_TX_MASK 0xf
++#define HSDMA_INT_TX_SHIFT 0
++#define HSDMA_INT_TX_Q0 BIT(0)
++
++/* tx/rx dma desc flags */
++#define HSDMA_PLEN_MASK 0x3fff
++#define HSDMA_DESC_DONE BIT(31)
++#define HSDMA_DESC_LS0 BIT(30)
++#define HSDMA_DESC_PLEN0(_x) (((_x) & HSDMA_PLEN_MASK) << 16)
++#define HSDMA_DESC_TAG BIT(15)
++#define HSDMA_DESC_LS1 BIT(14)
++#define HSDMA_DESC_PLEN1(_x) ((_x) & HSDMA_PLEN_MASK)
++
++/* align 4 bytes */
++#define HSDMA_ALIGN_SIZE 3
++/* align size 128bytes */
++#define HSDMA_MAX_PLEN 0x3f80
++
++struct hsdma_desc {
++ u32 addr0;
++ u32 flags;
++ u32 addr1;
++ u32 unused;
++};
++
++struct mtk_hsdma_sg {
++ dma_addr_t src_addr;
++ dma_addr_t dst_addr;
++ u32 len;
++};
++
++struct mtk_hsdma_desc {
++ struct virt_dma_desc vdesc;
++ unsigned int num_sgs;
++ struct mtk_hsdma_sg sg[1];
++};
++
++struct mtk_hsdma_chan {
++ struct virt_dma_chan vchan;
++ unsigned int id;
++ dma_addr_t desc_addr;
++ int tx_idx;
++ int rx_idx;
++ struct hsdma_desc *tx_ring;
++ struct hsdma_desc *rx_ring;
++ struct mtk_hsdma_desc *desc;
++ unsigned int next_sg;
++};
++
++struct mtk_hsdam_engine {
++ struct dma_device ddev;
++ struct device_dma_parameters dma_parms;
++ void __iomem *base;
++ struct tasklet_struct task;
++ volatile unsigned long chan_issued;
++
++ struct mtk_hsdma_chan chan[1];
++};
++
++static inline struct mtk_hsdam_engine *mtk_hsdma_chan_get_dev(
++ struct mtk_hsdma_chan *chan)
++{
++ return container_of(chan->vchan.chan.device, struct mtk_hsdam_engine,
++ ddev);
++}
++
++static inline struct mtk_hsdma_chan *to_mtk_hsdma_chan(struct dma_chan *c)
++{
++ return container_of(c, struct mtk_hsdma_chan, vchan.chan);
++}
++
++static inline struct mtk_hsdma_desc *to_mtk_hsdma_desc(
++ struct virt_dma_desc *vdesc)
++{
++ return container_of(vdesc, struct mtk_hsdma_desc, vdesc);
++}
++
++static inline u32 mtk_hsdma_read(struct mtk_hsdam_engine *hsdma, u32 reg)
++{
++ return readl(hsdma->base + reg);
++}
++
++static inline void mtk_hsdma_write(struct mtk_hsdam_engine *hsdma,
++ unsigned reg, u32 val)
++{
++ writel(val, hsdma->base + reg);
++}
++
++static void mtk_hsdma_reset_chan(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ chan->tx_idx = 0;
++ chan->rx_idx = HSDMA_DESCS_NUM - 1;
++
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CTX, chan->tx_idx);
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CRX, chan->rx_idx);
++
++ mtk_hsdma_write(hsdma, HSDMA_REG_RST_CFG,
++ 0x1 << (chan->id + HSDMA_RST_TX_SHIFT));
++ mtk_hsdma_write(hsdma, HSDMA_REG_RST_CFG,
++ 0x1 << (chan->id + HSDMA_RST_RX_SHIFT));
++}
++
++static void hsdma_dump_reg(struct mtk_hsdam_engine *hsdma)
++{
++ dev_dbg(hsdma->ddev.dev, "tbase %08x, tcnt %08x, " \
++ "tctx %08x, tdtx: %08x, rbase %08x, " \
++ "rcnt %08x, rctx %08x, rdtx %08x\n",
++ mtk_hsdma_read(hsdma, HSDMA_REG_TX_BASE),
++ mtk_hsdma_read(hsdma, HSDMA_REG_TX_CNT),
++ mtk_hsdma_read(hsdma, HSDMA_REG_TX_CTX),
++ mtk_hsdma_read(hsdma, HSDMA_REG_TX_DTX),
++ mtk_hsdma_read(hsdma, HSDMA_REG_RX_BASE),
++ mtk_hsdma_read(hsdma, HSDMA_REG_RX_CNT),
++ mtk_hsdma_read(hsdma, HSDMA_REG_RX_CRX),
++ mtk_hsdma_read(hsdma, HSDMA_REG_RX_DRX));
++
++ dev_dbg(hsdma->ddev.dev, "info %08x, glo %08x, delay %08x, " \
++ "intr_stat %08x, intr_mask %08x\n",
++ mtk_hsdma_read(hsdma, HSDMA_REG_INFO),
++ mtk_hsdma_read(hsdma, HSDMA_REG_GLO_CFG),
++ mtk_hsdma_read(hsdma, HSDMA_REG_DELAY_INT),
++ mtk_hsdma_read(hsdma, HSDMA_REG_INT_STATUS),
++ mtk_hsdma_read(hsdma, HSDMA_REG_INT_MASK));
++}
++
++static void hsdma_dump_desc(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ struct hsdma_desc *tx_desc;
++ struct hsdma_desc *rx_desc;
++ int i;
++
++ dev_dbg(hsdma->ddev.dev, "tx idx: %d, rx idx: %d\n",
++ chan->tx_idx, chan->rx_idx);
++
++ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
++ tx_desc = &chan->tx_ring[i];
++ rx_desc = &chan->rx_ring[i];
++
++ dev_dbg(hsdma->ddev.dev, "%d tx addr0: %08x, flags %08x, " \
++ "tx addr1: %08x, rx addr0 %08x, flags %08x\n",
++ i, tx_desc->addr0, tx_desc->flags, \
++ tx_desc->addr1, rx_desc->addr0, rx_desc->flags);
++ }
++}
++
++static void mtk_hsdma_reset(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ int i;
++
++ /* disable dma */
++ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, 0);
++
++ /* disable intr */
++ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, 0);
++
++ /* init desc value */
++ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
++ chan->tx_ring[i].addr0 = 0;
++ chan->tx_ring[i].flags = HSDMA_DESC_LS0 |
++ HSDMA_DESC_DONE;
++ }
++ for (i = 0; i < HSDMA_DESCS_NUM; i++) {
++ chan->rx_ring[i].addr0 = 0;
++ chan->rx_ring[i].flags = 0;
++ }
++
++ /* reset */
++ mtk_hsdma_reset_chan(hsdma, chan);
++
++ /* enable intr */
++ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, HSDMA_INT_RX_Q0);
++
++ /* enable dma */
++ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, HSDMA_GLO_DEFAULT);
++}
++
++static int mtk_hsdma_terminate_all(struct dma_chan *c)
++{
++ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
++ struct mtk_hsdam_engine *hsdma = mtk_hsdma_chan_get_dev(chan);
++ unsigned long timeout;
++ LIST_HEAD(head);
++
++ spin_lock_bh(&chan->vchan.lock);
++ chan->desc = NULL;
++ clear_bit(chan->id, &hsdma->chan_issued);
++ vchan_get_all_descriptors(&chan->vchan, &head);
++ spin_unlock_bh(&chan->vchan.lock);
++
++ vchan_dma_desc_free_list(&chan->vchan, &head);
++
++ /* wait dma transfer complete */
++ timeout = jiffies + msecs_to_jiffies(2000);
++ while (mtk_hsdma_read(hsdma, HSDMA_REG_GLO_CFG) &
++ (HSDMA_GLO_RX_BUSY | HSDMA_GLO_TX_BUSY)) {
++ if (time_after_eq(jiffies, timeout)) {
++ hsdma_dump_desc(hsdma, chan);
++ mtk_hsdma_reset(hsdma, chan);
++ dev_err(hsdma->ddev.dev, "timeout, reset it\n");
++ break;
++ }
++ cpu_relax();
++ }
++
++ return 0;
++}
++
++static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ dma_addr_t src, dst;
++ size_t len, tlen;
++ struct hsdma_desc *tx_desc, *rx_desc;
++ struct mtk_hsdma_sg *sg;
++ unsigned int i;
++ int rx_idx;
++
++ sg = &chan->desc->sg[0];
++ len = sg->len;
++ chan->desc->num_sgs = DIV_ROUND_UP(len, HSDMA_MAX_PLEN);
++
++ /* tx desc */
++ src = sg->src_addr;
++ for (i = 0; i < chan->desc->num_sgs; i++) {
++ if (len > HSDMA_MAX_PLEN)
++ tlen = HSDMA_MAX_PLEN;
++ else
++ tlen = len;
++
++ if (i & 0x1) {
++ tx_desc->addr1 = src;
++ tx_desc->flags |= HSDMA_DESC_PLEN1(tlen);
++ } else {
++ tx_desc = &chan->tx_ring[chan->tx_idx];
++ tx_desc->addr0 = src;
++ tx_desc->flags = HSDMA_DESC_PLEN0(tlen);
++
++ /* update index */
++ chan->tx_idx = HSDMA_NEXT_DESC(chan->tx_idx);
++ }
++
++ src += tlen;
++ len -= tlen;
++ }
++ if (i & 0x1)
++ tx_desc->flags |= HSDMA_DESC_LS0;
++ else
++ tx_desc->flags |= HSDMA_DESC_LS1;
++
++ /* rx desc */
++ rx_idx = HSDMA_NEXT_DESC(chan->rx_idx);
++ len = sg->len;
++ dst = sg->dst_addr;
++ for (i = 0; i < chan->desc->num_sgs; i++) {
++ rx_desc = &chan->rx_ring[rx_idx];
++ if (len > HSDMA_MAX_PLEN)
++ tlen = HSDMA_MAX_PLEN;
++ else
++ tlen = len;
++
++ rx_desc->addr0 = dst;
++ rx_desc->flags = HSDMA_DESC_PLEN0(tlen);
++
++ dst += tlen;
++ len -= tlen;
++
++ /* update index */
++ rx_idx = HSDMA_NEXT_DESC(rx_idx);
++ }
++
++ /* make sure desc and index all up to date */
++ wmb();
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CTX, chan->tx_idx);
++
++ return 0;
++}
++
++static int gdma_next_desc(struct mtk_hsdma_chan *chan)
++{
++ struct virt_dma_desc *vdesc;
++
++ vdesc = vchan_next_desc(&chan->vchan);
++ if (!vdesc) {
++ chan->desc = NULL;
++ return 0;
++ }
++ chan->desc = to_mtk_hsdma_desc(vdesc);
++ chan->next_sg = 0;
++
++ return 1;
++}
++
++static void mtk_hsdma_chan_done(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ struct mtk_hsdma_desc *desc;
++ int chan_issued;
++
++ chan_issued = 0;
++ spin_lock_bh(&chan->vchan.lock);
++ desc = chan->desc;
++ if (likely(desc)) {
++ if (chan->next_sg == desc->num_sgs) {
++ list_del(&desc->vdesc.node);
++ vchan_cookie_complete(&desc->vdesc);
++ chan_issued = gdma_next_desc(chan);
++ }
++ } else
++ dev_dbg(hsdma->ddev.dev, "no desc to complete\n");
++
++ if (chan_issued)
++ set_bit(chan->id, &hsdma->chan_issued);
++ spin_unlock_bh(&chan->vchan.lock);
++}
++
++static irqreturn_t mtk_hsdma_irq(int irq, void *devid)
++{
++ struct mtk_hsdam_engine *hsdma = devid;
++ u32 status;
++
++ status = mtk_hsdma_read(hsdma, HSDMA_REG_INT_STATUS);
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ if (likely(status & HSDMA_INT_RX_Q0))
++ tasklet_schedule(&hsdma->task);
++ else
++ dev_dbg(hsdma->ddev.dev, "unhandle irq status %08x\n",
++ status);
++ /* clean intr bits */
++ mtk_hsdma_write(hsdma, HSDMA_REG_INT_STATUS, status);
++
++ return IRQ_HANDLED;
++}
++
++static void mtk_hsdma_issue_pending(struct dma_chan *c)
++{
++ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
++ struct mtk_hsdam_engine *hsdma = mtk_hsdma_chan_get_dev(chan);
++
++ spin_lock_bh(&chan->vchan.lock);
++ if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
++ if (gdma_next_desc(chan)) {
++ set_bit(chan->id, &hsdma->chan_issued);
++ tasklet_schedule(&hsdma->task);
++ } else
++ dev_dbg(hsdma->ddev.dev, "no desc to issue\n");
++ }
++ spin_unlock_bh(&chan->vchan.lock);
++}
++
++static struct dma_async_tx_descriptor * mtk_hsdma_prep_dma_memcpy(
++ struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
++ size_t len, unsigned long flags)
++{
++ struct mtk_hsdma_chan *chan = to_mtk_hsdma_chan(c);
++ struct mtk_hsdma_desc *desc;
++
++ if (len <= 0)
++ return NULL;
++
++ desc = kzalloc(sizeof(struct mtk_hsdma_desc), GFP_ATOMIC);
++ if (!desc) {
++ dev_err(c->device->dev, "alloc memcpy decs error\n");
++ return NULL;
++ }
++
++ desc->sg[0].src_addr = src;
++ desc->sg[0].dst_addr = dest;
++ desc->sg[0].len = len;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static enum dma_status mtk_hsdma_tx_status(struct dma_chan *c,
++ dma_cookie_t cookie, struct dma_tx_state *state)
++{
++ return dma_cookie_status(c, cookie, state);
++}
++
++static void mtk_hsdma_free_chan_resources(struct dma_chan *c)
++{
++ vchan_free_chan_resources(to_virt_chan(c));
++}
++
++static void mtk_hsdma_desc_free(struct virt_dma_desc *vdesc)
++{
++ kfree(container_of(vdesc, struct mtk_hsdma_desc, vdesc));
++}
++
++static void mtk_hsdma_tx(struct mtk_hsdam_engine *hsdma)
++{
++ struct mtk_hsdma_chan *chan;
++
++ if (test_and_clear_bit(0, &hsdma->chan_issued)) {
++ chan = &hsdma->chan[0];
++ if (chan->desc) {
++ mtk_hsdma_start_transfer(hsdma, chan);
++ } else
++ dev_dbg(hsdma->ddev.dev,"chan 0 no desc to issue\n");
++ }
++}
++
++static void mtk_hsdma_rx(struct mtk_hsdam_engine *hsdma)
++{
++ struct mtk_hsdma_chan *chan;
++ int next_idx, drx_idx, cnt;
++
++ chan = &hsdma->chan[0];
++ next_idx = HSDMA_NEXT_DESC(chan->rx_idx);
++ drx_idx = mtk_hsdma_read(hsdma, HSDMA_REG_RX_DRX);
++
++ cnt = (drx_idx - next_idx) & HSDMA_DESCS_MASK;
++ if (!cnt)
++ return;
++
++ chan->next_sg += cnt;
++ chan->rx_idx = (chan->rx_idx + cnt) & HSDMA_DESCS_MASK;
++
++ /* update rx crx */
++ wmb();
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CRX, chan->rx_idx);
++
++ mtk_hsdma_chan_done(hsdma, chan);
++}
++
++static void mtk_hsdma_tasklet(unsigned long arg)
++{
++ struct mtk_hsdam_engine *hsdma = (struct mtk_hsdam_engine *)arg;
++
++ mtk_hsdma_rx(hsdma);
++ mtk_hsdma_tx(hsdma);
++}
++
++static int mtk_hsdam_alloc_desc(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ int i;
++
++ chan->tx_ring = dma_alloc_coherent(hsdma->ddev.dev,
++ 2 * HSDMA_DESCS_NUM * sizeof(*chan->tx_ring),
++ &chan->desc_addr, GFP_ATOMIC | __GFP_ZERO);
++ if (!chan->tx_ring)
++ goto no_mem;
++
++ chan->rx_ring = &chan->tx_ring[HSDMA_DESCS_NUM];
++
++ /* init tx ring value */
++ for (i = 0; i < HSDMA_DESCS_NUM; i++)
++ chan->tx_ring[i].flags = HSDMA_DESC_LS0 | HSDMA_DESC_DONE;
++
++ return 0;
++no_mem:
++ return -ENOMEM;
++}
++
++static void mtk_hsdam_free_desc(struct mtk_hsdam_engine *hsdma,
++ struct mtk_hsdma_chan *chan)
++{
++ if (chan->tx_ring) {
++ dma_free_coherent(hsdma->ddev.dev,
++ 2 * HSDMA_DESCS_NUM * sizeof(*chan->tx_ring),
++ chan->tx_ring, chan->desc_addr);
++ chan->tx_ring = NULL;
++ chan->rx_ring = NULL;
++ }
++}
++
++static int mtk_hsdma_init(struct mtk_hsdam_engine *hsdma)
++{
++ struct mtk_hsdma_chan *chan;
++ int ret;
++ u32 reg;
++
++ /* init desc */
++ chan = &hsdma->chan[0];
++ ret = mtk_hsdam_alloc_desc(hsdma, chan);
++ if (ret)
++ return ret;
++
++ /* tx */
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_BASE, chan->desc_addr);
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CNT, HSDMA_DESCS_NUM);
++ /* rx */
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_BASE, chan->desc_addr +
++ (sizeof(struct hsdma_desc) * HSDMA_DESCS_NUM));
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CNT, HSDMA_DESCS_NUM);
++ /* reset */
++ mtk_hsdma_reset_chan(hsdma, chan);
++
++ /* enable rx intr */
++ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, HSDMA_INT_RX_Q0);
++
++ /* enable dma */
++ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, HSDMA_GLO_DEFAULT);
++
++ /* hardware info */
++ reg = mtk_hsdma_read(hsdma, HSDMA_REG_INFO);
++ dev_info(hsdma->ddev.dev, "rx: %d, tx: %d\n",
++ (reg >> HSDMA_INFO_RX_SHIFT) & HSDMA_INFO_RX_MASK,
++ (reg >> HSDMA_INFO_TX_SHIFT) & HSDMA_INFO_TX_MASK);
++
++ hsdma_dump_reg(hsdma);
++
++ return ret;
++}
++
++static void mtk_hsdma_uninit(struct mtk_hsdam_engine *hsdma)
++{
++ struct mtk_hsdma_chan *chan;
++
++ /* disable dma */
++ mtk_hsdma_write(hsdma, HSDMA_REG_GLO_CFG, 0);
++
++ /* disable intr */
++ mtk_hsdma_write(hsdma, HSDMA_REG_INT_MASK, 0);
++
++ /* free desc */
++ chan = &hsdma->chan[0];
++ mtk_hsdam_free_desc(hsdma, chan);
++
++ /* tx */
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_BASE, 0);
++ mtk_hsdma_write(hsdma, HSDMA_REG_TX_CNT, 0);
++ /* rx */
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_BASE, 0);
++ mtk_hsdma_write(hsdma, HSDMA_REG_RX_CNT, 0);
++ /* reset */
++ mtk_hsdma_reset_chan(hsdma, chan);
++}
++
++static const struct of_device_id mtk_hsdma_of_match[] = {
++ { .compatible = "mediatek,mt7621-hsdma" },
++ { },
++};
++
++static int mtk_hsdma_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct mtk_hsdma_chan *chan;
++ struct mtk_hsdam_engine *hsdma;
++ struct dma_device *dd;
++ struct resource *res;
++ int ret;
++ int irq;
++ void __iomem *base;
++
++ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
++ if (ret)
++ return ret;
++
++ match = of_match_device(mtk_hsdma_of_match, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++
++ hsdma = devm_kzalloc(&pdev->dev, sizeof(*hsdma), GFP_KERNEL);
++ if (!hsdma) {
++ dev_err(&pdev->dev, "alloc dma device failed\n");
++ return -EINVAL;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++ hsdma->base = base + HSDMA_BASE_OFFSET;
++ tasklet_init(&hsdma->task, mtk_hsdma_tasklet, (unsigned long)hsdma);
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++ ret = devm_request_irq(&pdev->dev, irq, mtk_hsdma_irq,
++ 0, dev_name(&pdev->dev), hsdma);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return ret;
++ }
++
++ device_reset(&pdev->dev);
++
++ dd = &hsdma->ddev;
++ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
++ dd->copy_align = HSDMA_ALIGN_SIZE;
++ dd->device_free_chan_resources = mtk_hsdma_free_chan_resources;
++ dd->device_prep_dma_memcpy = mtk_hsdma_prep_dma_memcpy;
++ dd->device_terminate_all = mtk_hsdma_terminate_all;
++ dd->device_tx_status = mtk_hsdma_tx_status;
++ dd->device_issue_pending = mtk_hsdma_issue_pending;
++ dd->dev = &pdev->dev;
++ dd->dev->dma_parms = &hsdma->dma_parms;
++ dma_set_max_seg_size(dd->dev, HSDMA_MAX_PLEN);
++ INIT_LIST_HEAD(&dd->channels);
++
++ chan = &hsdma->chan[0];
++ chan->id = 0;
++ chan->vchan.desc_free = mtk_hsdma_desc_free;
++ vchan_init(&chan->vchan, dd);
++
++ /* init hardware */
++ ret = mtk_hsdma_init(hsdma);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to alloc ring descs\n");
++ return ret;
++ }
++
++ ret = dma_async_device_register(dd);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to register dma device\n");
++ return ret;
++ }
++
++ ret = of_dma_controller_register(pdev->dev.of_node,
++ of_dma_xlate_by_chan_id, hsdma);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to register of dma controller\n");
++ goto err_unregister;
++ }
++
++ platform_set_drvdata(pdev, hsdma);
++
++ return 0;
++
++err_unregister:
++ dma_async_device_unregister(dd);
++ return ret;
++}
++
++static int mtk_hsdma_remove(struct platform_device *pdev)
++{
++ struct mtk_hsdam_engine *hsdma = platform_get_drvdata(pdev);
++
++ mtk_hsdma_uninit(hsdma);
++
++ of_dma_controller_free(pdev->dev.of_node);
++ dma_async_device_unregister(&hsdma->ddev);
++
++ return 0;
++}
++
++static struct platform_driver mtk_hsdma_driver = {
++ .probe = mtk_hsdma_probe,
++ .remove = mtk_hsdma_remove,
++ .driver = {
++ .name = "hsdma-mt7621",
++ .of_match_table = mtk_hsdma_of_match,
++ },
++};
++module_platform_driver(mtk_hsdma_driver);
++
++MODULE_AUTHOR("Michael Lee <igvtee at gmail.com>");
++MODULE_DESCRIPTION("MTK HSDMA driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ramips/patches-4.9/0048-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-4.9/0048-asoc-add-mt7620-support.patch
new file mode 100644
index 0000000..720ebd3
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0048-asoc-add-mt7620-support.patch
@@ -0,0 +1,1046 @@
+From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:31:47 +0100
+Subject: [PATCH 48/53] asoc: add mt7620 support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 +
+ sound/soc/Kconfig | 1 +
+ sound/soc/Makefile | 1 +
+ sound/soc/ralink/Kconfig | 15 ++
+ sound/soc/ralink/Makefile | 11 +
+ sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
+ sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
+ 7 files changed, 699 insertions(+)
+ create mode 100644 sound/soc/ralink/Kconfig
+ create mode 100644 sound/soc/ralink/Makefile
+ create mode 100644 sound/soc/ralink/mt7620-i2s.c
+ create mode 100644 sound/soc/ralink/mt7620-wm8960.c
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -15,6 +15,7 @@
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
+ #include <linux/bootmem.h>
++#include <linux/module.h>
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
+
+@@ -26,6 +27,7 @@
+ #include "common.h"
+
+ __iomem void *rt_sysc_membase;
++EXPORT_SYMBOL(rt_sysc_membase);
+ __iomem void *rt_memc_membase;
+
+ __iomem void *plat_of_remap_node(const char *node)
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -58,6 +58,7 @@ source "sound/soc/mxs/Kconfig"
+ source "sound/soc/pxa/Kconfig"
+ source "sound/soc/qcom/Kconfig"
+ source "sound/soc/rockchip/Kconfig"
++source "sound/soc/ralink/Kconfig"
+ source "sound/soc/samsung/Kconfig"
+ source "sound/soc/sh/Kconfig"
+ source "sound/soc/sirf/Kconfig"
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
+ obj-$(CONFIG_SND_SOC) += pxa/
+ obj-$(CONFIG_SND_SOC) += qcom/
+ obj-$(CONFIG_SND_SOC) += rockchip/
++obj-$(CONFIG_SND_SOC) += ralink/
+ obj-$(CONFIG_SND_SOC) += samsung/
+ obj-$(CONFIG_SND_SOC) += sh/
+ obj-$(CONFIG_SND_SOC) += sirf/
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
+@@ -0,0 +1,8 @@
++config SND_RALINK_SOC_I2S
++ depends on RALINK && SND_SOC && !SOC_RT288X
++ select SND_SOC_GENERIC_DMAENGINE_PCM
++ select REGMAP_MMIO
++ tristate "SoC Audio (I2S protocol) for Ralink SoC"
++ help
++ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
++ based boards.
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
+@@ -0,0 +1,6 @@
++#
++# Ralink/MediaTek Platform Support
++#
++snd-soc-ralink-i2s-objs := ralink-i2s.o
++
++obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
+--- /dev/null
++++ b/sound/soc/ralink/ralink-i2s.c
+@@ -0,0 +1,965 @@
++/*
++ * Copyright (C) 2010, Lars-Peter Clausen <lars at metafoo.de>
++ * Copyright (C) 2016 Michael Lee <igvtee at gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/debugfs.h>
++#include <linux/of_device.h>
++#include <sound/pcm_params.h>
++#include <sound/dmaengine_pcm.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define DRV_NAME "ralink-i2s"
++
++#define I2S_REG_CFG0 0x00
++#define I2S_REG_INT_STATUS 0x04
++#define I2S_REG_INT_EN 0x08
++#define I2S_REG_FF_STATUS 0x0c
++#define I2S_REG_WREG 0x10
++#define I2S_REG_RREG 0x14
++#define I2S_REG_CFG1 0x18
++#define I2S_REG_DIVCMP 0x20
++#define I2S_REG_DIVINT 0x24
++
++/* I2S_REG_CFG0 */
++#define I2S_REG_CFG0_EN BIT(31)
++#define I2S_REG_CFG0_DMA_EN BIT(30)
++#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
++#define I2S_REG_CFG0_TX_EN BIT(24)
++#define I2S_REG_CFG0_RX_EN BIT(20)
++#define I2S_REG_CFG0_SLAVE BIT(16)
++#define I2S_REG_CFG0_RX_THRES 12
++#define I2S_REG_CFG0_TX_THRES 4
++#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++/* RT305x */
++#define I2S_REG_CFG0_CLK_DIS BIT(8)
++#define I2S_REG_CFG0_TXCH_SWAP BIT(3)
++#define I2S_REG_CFG0_TXCH1_OFF BIT(2)
++#define I2S_REG_CFG0_TXCH0_OFF BIT(1)
++#define I2S_REG_CFG0_SLAVE_EN BIT(0)
++/* RT3883 */
++#define I2S_REG_CFG0_RXCH_SWAP BIT(11)
++#define I2S_REG_CFG0_RXCH1_OFF BIT(10)
++#define I2S_REG_CFG0_RXCH0_OFF BIT(9)
++#define I2S_REG_CFG0_WS_INV BIT(0)
++/* MT7628 */
++#define I2S_REG_CFG0_FMT_LE BIT(29)
++#define I2S_REG_CFG0_SYS_BE BIT(28)
++#define I2S_REG_CFG0_NORM_24 BIT(18)
++#define I2S_REG_CFG0_DATA_24 BIT(17)
++
++/* I2S_REG_INT_STATUS */
++#define I2S_REG_INT_RX_FAULT BIT(7)
++#define I2S_REG_INT_RX_OVRUN BIT(6)
++#define I2S_REG_INT_RX_UNRUN BIT(5)
++#define I2S_REG_INT_RX_THRES BIT(4)
++#define I2S_REG_INT_TX_FAULT BIT(3)
++#define I2S_REG_INT_TX_OVRUN BIT(2)
++#define I2S_REG_INT_TX_UNRUN BIT(1)
++#define I2S_REG_INT_TX_THRES BIT(0)
++#define I2S_REG_INT_TX_MASK 0xf
++#define I2S_REG_INT_RX_MASK 0xf0
++
++/* I2S_REG_INT_STATUS */
++#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf)
++#define I2S_TX_AVCNT(x) (x & 0xf)
++/* MT7628 */
++#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f)
++#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f)
++
++/* I2S_REG_CFG1 */
++#define I2S_REG_CFG1_LBK BIT(31)
++#define I2S_REG_CFG1_EXTLBK BIT(30)
++/* RT3883 */
++#define I2S_REG_CFG1_LEFT_J BIT(0)
++#define I2S_REG_CFG1_RIGHT_J BIT(1)
++#define I2S_REG_CFG1_FMT_MASK 0x3
++
++/* I2S_REG_DIVCMP */
++#define I2S_REG_DIVCMP_CLKEN BIT(31)
++#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff
++
++/* I2S_REG_DIVINT */
++#define I2S_REG_DIVINT_MASK 0x3ff
++
++/* BCLK dividers */
++#define RALINK_I2S_DIVCMP 0
++#define RALINK_I2S_DIVINT 1
++
++/* FIFO */
++#define RALINK_I2S_FIFO_SIZE 32
++
++/* feature flags */
++#define RALINK_FLAGS_TXONLY BIT(0)
++#define RALINK_FLAGS_LEFT_J BIT(1)
++#define RALINK_FLAGS_RIGHT_J BIT(2)
++#define RALINK_FLAGS_ENDIAN BIT(3)
++#define RALINK_FLAGS_24BIT BIT(4)
++
++#define RALINK_I2S_INT_EN 0
++
++struct ralink_i2s_stats {
++ u32 dmafault;
++ u32 overrun;
++ u32 underrun;
++ u32 belowthres;
++};
++
++struct ralink_i2s {
++ struct device *dev;
++ void __iomem *regs;
++ struct clk *clk;
++ struct regmap *regmap;
++ u32 flags;
++ unsigned int fmt;
++ u16 txdma_req;
++ u16 rxdma_req;
++
++ struct snd_dmaengine_dai_dma_data playback_dma_data;
++ struct snd_dmaengine_dai_dma_data capture_dma_data;
++
++ struct dentry *dbg_dir;
++ struct dentry *dbg_stats;
++ struct ralink_i2s_stats txstats;
++ struct ralink_i2s_stats rxstats;
++};
++
++static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
++{
++ u32 buf[10];
++ int ret;
++
++ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
++ buf, ARRAY_SIZE(buf));
++
++ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
++ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
++ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
++ buf[0], buf[1], buf[2], buf[3], buf[4],
++ buf[5], buf[6], buf[8], buf[9]);
++}
++
++static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
++ int clk_id, unsigned int freq, int dir)
++{
++ return 0;
++}
++
++static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int div;
++ uint32_t data;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_CLK_DIS,
++ I2S_REG_CFG0_CLK_DIS);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
++ div = (clk / rate ) - 1;
++
++ data = rt_sysc_r32(0x30);
++ data &= (0xff << 8);
++ data |= (0x1 << 15) | (div << 8);
++ rt_sysc_w32(data, 0x30);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
++ clk, rate, div);
++
++ return 0;
++}
++
++static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int divint, divcomp;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_CLKEN, 0);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
++ clk = clk / (2 * 2 * width);
++ divint = clk / rate;
++ divcomp = ((clk % rate) * 512) / rate;
++
++ if ((divint > I2S_REG_DIVINT_MASK) ||
++ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
++ return -EINVAL;
++
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
++ I2S_REG_DIVINT_MASK, divint);
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
++ I2S_REG_DIVCMP_CLKEN);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
++ clk_get_rate(i2s->clk), rate, divint, divcomp);
++
++ return 0;
++}
++
++static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int cfg0 = 0, cfg1 = 0;
++
++ /* set master/slave audio interface */
++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++ case SND_SOC_DAIFMT_CBM_CFM:
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ cfg0 |= I2S_REG_CFG0_SLAVE_EN;
++ else
++ cfg0 |= I2S_REG_CFG0_SLAVE;
++ break;
++ case SND_SOC_DAIFMT_CBS_CFS:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ /* interface format */
++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++ case SND_SOC_DAIFMT_I2S:
++ break;
++ case SND_SOC_DAIFMT_RIGHT_J:
++ if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
++ cfg1 |= I2S_REG_CFG1_RIGHT_J;
++ break;
++ }
++ return -EINVAL;
++ case SND_SOC_DAIFMT_LEFT_J:
++ if (i2s->flags & RALINK_FLAGS_LEFT_J) {
++ cfg1 |= I2S_REG_CFG1_LEFT_J;
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ /* clock inversion */
++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++ case SND_SOC_DAIFMT_NB_NF:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE_EN, cfg0);
++ } else {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE, cfg0);
++ }
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
++ I2S_REG_CFG1_FMT_MASK, cfg1);
++ i2s->fmt = fmt;
++
++ return 0;
++}
++
++static int ralink_i2s_startup(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ if (dai->active)
++ return 0;
++
++ /* setup status interrupt */
++#if (RALINK_I2S_INT_EN)
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
++#else
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
++#endif
++
++ /* enable */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_THRES_MASK,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_DFT_THRES);
++
++ return 0;
++}
++
++static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ /* If both streams are stopped, disable module and clock */
++ if (dai->active)
++ return;
++
++ /*
++ * datasheet mention when disable all control regs are cleared
++ * to initial values. need reinit at startup.
++ */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
++}
++
++static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ int width;
++ int ret;
++
++ width = params_width(params);
++ switch (width) {
++ case 16:
++ if (i2s->flags & RALINK_FLAGS_24BIT)
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24, 0);
++ break;
++ case 24:
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24,
++ I2S_REG_CFG0_DATA_24);
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ switch (params_channels(params)) {
++ case 2:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ /* system endian */
++#ifdef SNDRV_LITTLE_ENDIAN
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE, 0);
++#else
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE,
++ I2S_REG_CFG0_SYS_BE);
++#endif
++
++ /* data endian */
++ switch (params_format(params)) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ case SNDRV_PCM_FORMAT_S24_LE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE,
++ I2S_REG_CFG0_FMT_LE);
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ case SNDRV_PCM_FORMAT_S24_BE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE, 0);
++ break;
++ default:
++ return -EINVAL;
++ }
++ }
++
++ /* setup bclk rate */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
++ else
++ ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
++
++ return ret;
++}
++
++static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int mask, val;
++
++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++ mask = I2S_REG_CFG0_TX_EN;
++ else
++ mask = I2S_REG_CFG0_RX_EN;
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ case SNDRV_PCM_TRIGGER_RESUME:
++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++ val = mask;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ case SNDRV_PCM_TRIGGER_SUSPEND:
++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++ val = 0;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
++
++ return 0;
++}
++
++static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
++ struct resource *res)
++{
++ struct snd_dmaengine_dai_dma_data *dma_data;
++
++ /* Playback */
++ dma_data = &i2s->playback_dma_data;
++ dma_data->addr = res->start + I2S_REG_WREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->txdma_req;
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ return;
++
++ /* Capture */
++ dma_data = &i2s->capture_dma_data;
++ dma_data->addr = res->start + I2S_REG_RREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->rxdma_req;
++}
++
++static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
++ &i2s->capture_dma_data);
++
++ return 0;
++}
++
++static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
++{
++ return 0;
++}
++
++static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
++ .set_sysclk = ralink_i2s_set_sysclk,
++ .set_fmt = ralink_i2s_set_fmt,
++ .startup = ralink_i2s_startup,
++ .shutdown = ralink_i2s_shutdown,
++ .hw_params = ralink_i2s_hw_params,
++ .trigger = ralink_i2s_trigger,
++};
++
++static struct snd_soc_dai_driver ralink_i2s_dai = {
++ .name = DRV_NAME,
++ .probe = ralink_i2s_dai_probe,
++ .remove = ralink_i2s_dai_remove,
++ .ops = &ralink_i2s_dai_ops,
++ .capture = {
++ .stream_name = "I2S Capture",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .playback = {
++ .stream_name = "I2S Playback",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .symmetric_rates = 1,
++};
++
++static struct snd_pcm_hardware ralink_pcm_hardware = {
++ .info = SNDRV_PCM_INFO_MMAP |
++ SNDRV_PCM_INFO_MMAP_VALID |
++ SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ .channels_min = 2,
++ .channels_max = 2,
++ .period_bytes_min = PAGE_SIZE,
++ .period_bytes_max = PAGE_SIZE * 2,
++ .periods_min = 2,
++ .periods_max = 128,
++ .buffer_bytes_max = 128 * 1024,
++ .fifo_size = RALINK_I2S_FIFO_SIZE,
++};
++
++static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++ .pcm_hardware = &ralink_pcm_hardware,
++ .prealloc_buffer_size = 256 * PAGE_SIZE,
++};
++
++static const struct snd_soc_component_driver ralink_i2s_component = {
++ .name = DRV_NAME,
++};
++
++static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
++{
++ return true;
++}
++
++static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_INT_STATUS:
++ case I2S_REG_FF_STATUS:
++ return true;
++ }
++ return false;
++}
++
++static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_FF_STATUS:
++ case I2S_REG_RREG:
++ return false;
++ }
++ return true;
++}
++
++static const struct regmap_config ralink_i2s_regmap_config = {
++ .reg_bits = 32,
++ .reg_stride = 4,
++ .val_bits = 32,
++ .writeable_reg = ralink_i2s_writeable_reg,
++ .readable_reg = ralink_i2s_readable_reg,
++ .volatile_reg = ralink_i2s_volatile_reg,
++ .max_register = I2S_REG_DIVINT,
++};
++
++#if (RALINK_I2S_INT_EN)
++static irqreturn_t ralink_i2s_irq(int irq, void *devid)
++{
++ struct ralink_i2s *i2s = devid;
++ u32 status;
++
++ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ /* tx stats */
++ if (status & I2S_REG_INT_TX_MASK) {
++ if (status & I2S_REG_INT_TX_THRES)
++ i2s->txstats.belowthres++;
++ if (status & I2S_REG_INT_TX_UNRUN)
++ i2s->txstats.underrun++;
++ if (status & I2S_REG_INT_TX_OVRUN)
++ i2s->txstats.overrun++;
++ if (status & I2S_REG_INT_TX_FAULT)
++ i2s->txstats.dmafault++;
++ }
++
++ /* rx stats */
++ if (status & I2S_REG_INT_RX_MASK) {
++ if (status & I2S_REG_INT_RX_THRES)
++ i2s->rxstats.belowthres++;
++ if (status & I2S_REG_INT_RX_UNRUN)
++ i2s->rxstats.underrun++;
++ if (status & I2S_REG_INT_RX_OVRUN)
++ i2s->rxstats.overrun++;
++ if (status & I2S_REG_INT_RX_FAULT)
++ i2s->rxstats.dmafault++;
++ }
++
++ /* clean status bits */
++ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
++
++ return IRQ_HANDLED;
++}
++#endif
++
++#if IS_ENABLED(CONFIG_DEBUG_FS)
++static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
++{
++ struct ralink_i2s *i2s = s->private;
++
++ seq_printf(s, "tx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
++
++ seq_printf(s, "rx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
++
++ ralink_i2s_dump_regs(i2s);
++
++ return 0;
++}
++
++static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, ralink_i2s_stats_show, inode->i_private);
++}
++
++static const struct file_operations ralink_i2s_stats_ops = {
++ .open = ralink_i2s_stats_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
++ if (!i2s->dbg_dir)
++ return -ENOMEM;
++
++ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
++ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
++ if (!i2s->dbg_stats) {
++ debugfs_remove(i2s->dbg_dir);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
++{
++ debugfs_remove(i2s->dbg_stats);
++ debugfs_remove(i2s->dbg_dir);
++}
++#else
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg)
++{
++}
++#endif
++
++/*
++ * TODO: these refclk setup functions should use
++ * clock framework instead. hardcode it now.
++ */
++static void rt3350_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data |= (0x1 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3883_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x3 << 13);
++ data |= (0x1 << 13);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3552_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0xf << 8);
++ data |= (0x3 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7620_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7621_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x1f << 18);
++ data |= (0x19 << 18);
++ data &= ~(0x1f << 12);
++ data |= (0x1 << 12);
++ data &= ~(0x7 << 9);
++ data |= (0x5 << 9);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7628_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set i2s and refclk digital pad */
++ data = rt_sysc_r32(0x3c);
++ data |= 0x1f;
++ rt_sysc_w32(data, 0x3c);
++
++ /* Adjust REFCLK0's driving strength */
++ data = rt_sysc_r32(0x1354);
++ data &= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1354);
++ data = rt_sysc_r32(0x1364);
++ data |= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1364);
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++struct rt_i2s_data {
++ u32 flags;
++ void (*refclk_setup)(void);
++};
++
++struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
++struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
++ .refclk_setup = rt3350_refclk_setup };
++struct rt_i2s_data rt3883_i2s_data = {
++ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
++ .refclk_setup = rt3883_refclk_setup };
++struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
++struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
++struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
++struct rt_i2s_data mt7628_i2s_data = {
++ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
++ RALINK_FLAGS_LEFT_J),
++ .refclk_setup = mt7628_refclk_setup};
++
++static const struct of_device_id ralink_i2s_match_table[] = {
++ { .compatible = "ralink,rt3050-i2s",
++ .data = (void *)&rt3050_i2s_data },
++ { .compatible = "ralink,rt3350-i2s",
++ .data = (void *)&rt3350_i2s_data },
++ { .compatible = "ralink,rt3883-i2s",
++ .data = (void *)&rt3883_i2s_data },
++ { .compatible = "ralink,rt3352-i2s",
++ .data = (void *)&rt3352_i2s_data },
++ { .compatible = "mediatek,mt7620-i2s",
++ .data = (void *)&mt7620_i2s_data },
++ { .compatible = "mediatek,mt7621-i2s",
++ .data = (void *)&mt7621_i2s_data },
++ { .compatible = "mediatek,mt7628-i2s",
++ .data = (void *)&mt7628_i2s_data },
++};
++MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
++
++static int ralink_i2s_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct device_node *np = pdev->dev.of_node;
++ struct ralink_i2s *i2s;
++ struct resource *res;
++ int irq, ret;
++ u32 dma_req;
++ struct rt_i2s_data *data;
++
++ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
++ if (!i2s)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, i2s);
++ i2s->dev = &pdev->dev;
++
++ match = of_match_device(ralink_i2s_match_table, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++ data = (struct rt_i2s_data *)match->data;
++ i2s->flags = data->flags;
++ /* setup out 12Mhz refclk to codec as mclk */
++ if (data->refclk_setup)
++ data->refclk_setup();
++
++ if (of_property_read_u32(np, "txdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no txdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->txdma_req = (u16)dma_req;
++ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
++ if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no rxdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->rxdma_req = (u16)dma_req;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ i2s->regs = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2s->regs))
++ return PTR_ERR(i2s->regs);
++
++ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
++ &ralink_i2s_regmap_config);
++ if (IS_ERR(i2s->regmap)) {
++ dev_err(&pdev->dev, "regmap init failed\n");
++ return PTR_ERR(i2s->regmap);
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++
++#if (RALINK_I2S_INT_EN)
++ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
++ 0, dev_name(&pdev->dev), i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return ret;
++ }
++#endif
++
++ i2s->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2s->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return PTR_ERR(i2s->clk);
++ }
++
++ ret = clk_prepare_enable(i2s->clk);
++ if (ret)
++ return ret;
++
++ ralink_i2s_init_dma_data(i2s, res);
++
++ device_reset(&pdev->dev);
++
++ ret = ralink_i2s_debugfs_create(i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "create debugfs failed\n");
++ goto err_clk_disable;
++ }
++
++ /* enable 24bits support */
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ }
++
++ /* enable big endian support */
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_i2s_dai.playback.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_pcm_hardware.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ }
++ }
++
++ /* disable capture support */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
++ 0);
++
++ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
++ &ralink_i2s_dai, 1);
++ if (ret)
++ goto err_debugfs;
++
++ ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
++ &ralink_dmaengine_pcm_config,
++ SND_DMAENGINE_PCM_FLAG_COMPAT);
++ if (ret)
++ goto err_debugfs;
++
++ dev_info(i2s->dev, "mclk %luKHz\n", clk_get_rate(i2s->clk) / 1000000);
++
++ return 0;
++
++err_debugfs:
++ ralink_i2s_debugfs_remove(i2s);
++
++err_clk_disable:
++ clk_disable_unprepare(i2s->clk);
++
++ return ret;
++}
++
++static int ralink_i2s_remove(struct platform_device *pdev)
++{
++ struct ralink_i2s *i2s = platform_get_drvdata(pdev);
++
++ ralink_i2s_debugfs_remove(i2s);
++ clk_disable_unprepare(i2s->clk);
++
++ return 0;
++}
++
++static struct platform_driver ralink_i2s_driver = {
++ .probe = ralink_i2s_probe,
++ .remove = ralink_i2s_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .of_match_table = ralink_i2s_match_table,
++ },
++};
++module_platform_driver(ralink_i2s_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen, <lars at metafoo.de>");
++MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/target/linux/ramips/patches-4.9/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.9/0051-serial-add-ugly-custom-baud-rate-hack.patch
new file mode 100644
index 0000000..054db50
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0051-serial-add-ugly-custom-baud-rate-hack.patch
@@ -0,0 +1,22 @@
+From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 7 Dec 2015 17:31:08 +0100
+Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/tty/serial/serial_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -388,6 +388,9 @@ uart_get_baud_rate(struct uart_port *por
+ break;
+ }
+
++ if (tty_termios_baud_rate(termios) == 2500000)
++ return 250000;
++
+ for (try = 0; try < 2; try++) {
+ baud = tty_termios_baud_rate(termios);
+
diff --git a/target/linux/ramips/patches-4.9/0052-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-4.9/0052-pwm-add-mediatek-support.patch
new file mode 100644
index 0000000..c19b832
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0052-pwm-add-mediatek-support.patch
@@ -0,0 +1,217 @@
+From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 7 Dec 2015 17:16:50 +0100
+Subject: [PATCH 52/53] pwm: add mediatek support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/pwm/Kconfig | 9 +++
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 183 insertions(+)
+ create mode 100644 drivers/pwm/pwm-mediatek.c
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -282,6 +282,15 @@ config PWM_MTK_DISP
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mtk-disp.
+
++config PWM_MEDIATEK
++ tristate "Mediatek PWM support"
++ depends on RALINK && OF
++ help
++ Generic PWM framework driver for Mediatek ARM SoC.
++
++ To compile this driver as a module, choose M here: the module
++ will be called pwm-mxs.
++
+ config PWM_MXS
+ tristate "Freescale MXS PWM support"
+ depends on ARCH_MXS && OF
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
+ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
+ obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
+ obj-$(CONFIG_PWM_MESON) += pwm-meson.o
++obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
+ obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
+ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+ obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
+--- /dev/null
++++ b/drivers/pwm/pwm-mediatek.c
+@@ -0,0 +1,173 @@
++/*
++ * Mediatek Pulse Width Modulator driver
++ *
++ * Copyright (C) 2015 John Crispin <blogic at openwrt.org>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pwm.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++
++#define NUM_PWM 4
++
++/* PWM registers and bits definitions */
++#define PWMCON 0x00
++#define PWMHDUR 0x04
++#define PWMLDUR 0x08
++#define PWMGDUR 0x0c
++#define PWMWAVENUM 0x28
++#define PWMDWIDTH 0x2c
++#define PWMTHRES 0x30
++
++/**
++ * struct mtk_pwm_chip - struct representing pwm chip
++ *
++ * @mmio_base: base address of pwm chip
++ * @chip: linux pwm chip representation
++ */
++struct mtk_pwm_chip {
++ void __iomem *mmio_base;
++ struct pwm_chip chip;
++};
++
++static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
++{
++ return container_of(chip, struct mtk_pwm_chip, chip);
++}
++
++static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
++ unsigned long offset)
++{
++ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
++ unsigned int num, unsigned long offset,
++ unsigned long val)
++{
++ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
++ int duty_ns, int period_ns)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 resolution = 100 / 4;
++ u32 clkdiv = 0;
++
++ while (period_ns / resolution > 8191) {
++ clkdiv++;
++ resolution *= 2;
++ }
++
++ if (clkdiv > 7)
++ return -1;
++
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
++ return 0;
++}
++
++static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val |= BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++
++ return 0;
++}
++
++static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val &= ~BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++}
++
++static const struct pwm_ops mtk_pwm_ops = {
++ .config = mtk_pwm_config,
++ .enable = mtk_pwm_enable,
++ .disable = mtk_pwm_disable,
++ .owner = THIS_MODULE,
++};
++
++static int mtk_pwm_probe(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc;
++ struct resource *r;
++ int ret;
++
++ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
++ if (!pc)
++ return -ENOMEM;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(pc->mmio_base))
++ return PTR_ERR(pc->mmio_base);
++
++ platform_set_drvdata(pdev, pc);
++
++ pc->chip.dev = &pdev->dev;
++ pc->chip.ops = &mtk_pwm_ops;
++ pc->chip.base = -1;
++ pc->chip.npwm = NUM_PWM;
++
++ ret = pwmchip_add(&pc->chip);
++ if (ret < 0)
++ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
++
++ return ret;
++}
++
++static int mtk_pwm_remove(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < NUM_PWM; i++)
++ pwm_disable(&pc->chip.pwms[i]);
++
++ return pwmchip_remove(&pc->chip);
++}
++
++static const struct of_device_id mtk_pwm_of_match[] = {
++ { .compatible = "mediatek,mt7628-pwm" },
++ { }
++};
++
++MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
++
++static struct platform_driver mtk_pwm_driver = {
++ .driver = {
++ .name = "mtk-pwm",
++ .owner = THIS_MODULE,
++ .of_match_table = mtk_pwm_of_match,
++ },
++ .probe = mtk_pwm_probe,
++ .remove = mtk_pwm_remove,
++};
++
++module_platform_driver(mtk_pwm_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
++MODULE_ALIAS("platform:mtk-pwm");
diff --git a/target/linux/ramips/patches-4.9/0054-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-4.9/0054-mtd-add-chunked-read-io-to-m25p80.patch
new file mode 100644
index 0000000..ffea0b4
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0054-mtd-add-chunked-read-io-to-m25p80.patch
@@ -0,0 +1,123 @@
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1381,6 +1381,66 @@ write_err:
+ return ret;
+ }
+
++static int spi_nor_chunked_write(struct mtd_info *mtd, loff_t _to, size_t _len,
++ size_t *_retlen, const u_char *_buf)
++{
++ struct spi_nor *nor = mtd_to_spi_nor(mtd);
++ int chunk_size;
++ int retlen = 0;
++ int ret;
++
++ chunk_size = nor->chunk_size;
++ if (!chunk_size)
++ chunk_size = _len;
++
++ if (nor->addr_width > 3)
++ chunk_size -= nor->addr_width - 3;
++
++ while (retlen < _len) {
++ size_t len = min_t(int, chunk_size, _len - retlen);
++ const u_char *buf = _buf + retlen;
++ loff_t to = _to + retlen;
++
++ if (nor->flags & SNOR_F_SST)
++ ret = sst_write(mtd, to, len, &retlen, buf);
++ else
++ ret = spi_nor_write(mtd, to, len, &retlen, buf);
++ if (ret)
++ return ret;
++ }
++
++ *_retlen += retlen;
++ return 0;
++}
++
++static int spi_nor_chunked_read(struct mtd_info *mtd, loff_t _from, size_t _len,
++ size_t *_retlen, u_char *_buf)
++{
++ struct spi_nor *nor = mtd_to_spi_nor(mtd);
++ int chunk_size;
++ int ret;
++
++ chunk_size = nor->chunk_size;
++ if (!chunk_size)
++ chunk_size = _len;
++
++ *_retlen = 0;
++ while (*_retlen < _len) {
++ size_t len = min_t(int, chunk_size, _len - *_retlen);
++ u_char *buf = _buf + *_retlen;
++ loff_t from = _from + *_retlen;
++ int retlen = 0;
++
++ ret = spi_nor_read(mtd, from, len, &retlen, buf);
++ if (ret)
++ return ret;
++
++ *_retlen += retlen;
++ }
++
++ return 0;
++}
++
+ static int macronix_quad_enable(struct spi_nor *nor)
+ {
+ int ret, val;
+@@ -1623,10 +1683,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+ }
+
+ /* sst nor chips use AAI word program */
+- if (info->flags & SST_WRITE)
++ if (info->flags & SST_WRITE) {
+ mtd->_write = sst_write;
+- else
++ nor->flags |= SNOR_F_SST;
++ } else {
+ mtd->_write = spi_nor_write;
++ }
+
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+@@ -1656,11 +1718,20 @@ int spi_nor_scan(struct spi_nor *nor, co
+ mtd->writebufsize = nor->page_size;
+
+ if (np) {
++ u32 val;
++
+ /* If we were instantiated by DT, use it */
+ if (of_property_read_bool(np, "m25p,fast-read"))
+ nor->flash_read = SPI_NOR_FAST;
+ else
+ nor->flash_read = SPI_NOR_NORMAL;
++
++ if (!of_property_read_u32(np, "m25p,chunked-io", &val)) {
++ dev_info(dev, "using chunked io (size=%d)\n", val);
++ mtd->_read = spi_nor_chunked_read;
++ mtd->_write = spi_nor_chunked_write;
++ nor->chunk_size = val;
++ }
+ } else {
+ /* If we weren't instantiated by DT, default to fast-read */
+ nor->flash_read = SPI_NOR_FAST;
+--- a/include/linux/mtd/spi-nor.h
++++ b/include/linux/mtd/spi-nor.h
+@@ -141,6 +141,7 @@ enum spi_nor_option_flags {
+ SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
+ SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
+ SNOR_F_READY_XSR_RDY = BIT(4),
++ SNOR_F_SST = BIT(5),
+ };
+
+ /**
+@@ -180,6 +181,7 @@ struct spi_nor {
+ struct mutex lock;
+ struct device *dev;
+ u32 page_size;
++ u16 chunk_size;
+ u8 addr_width;
+ u8 erase_opcode;
+ u8 read_opcode;
diff --git a/target/linux/ramips/patches-4.9/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch b/target/linux/ramips/patches-4.9/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch
new file mode 100644
index 0000000..d950c47
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch
@@ -0,0 +1,12 @@
+--- a/arch/mips/include/asm/mips-cm.h
++++ b/arch/mips/include/asm/mips-cm.h
+@@ -239,8 +239,7 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
+ #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15)
+ #define CM_GCR_BASE_CMDEFTGT_SHF 0
+ #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0)
+-#define CM_GCR_BASE_CMDEFTGT_DISABLED 0
+-#define CM_GCR_BASE_CMDEFTGT_MEM 1
++#define CM_GCR_BASE_CMDEFTGT_MEM 0
+ #define CM_GCR_BASE_CMDEFTGT_IOCU0 2
+ #define CM_GCR_BASE_CMDEFTGT_IOCU1 3
+
diff --git a/target/linux/ramips/patches-4.9/0064-add_clk_round_rate.patch b/target/linux/ramips/patches-4.9/0064-add_clk_round_rate.patch
new file mode 100644
index 0000000..86d98b0
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0064-add_clk_round_rate.patch
@@ -0,0 +1,15 @@
+--- a/arch/mips/ralink/clk.c
++++ b/arch/mips/ralink/clk.c
+@@ -62,6 +62,12 @@ int clk_set_rate(struct clk *clk, unsign
+ }
+ EXPORT_SYMBOL_GPL(clk_set_rate);
+
++long clk_round_rate(struct clk *clk, unsigned long rate)
++{
++ return -1;
++}
++EXPORT_SYMBOL_GPL(clk_round_rate);
++
+ void __init plat_time_init(void)
+ {
+ struct clk *clk;
diff --git a/target/linux/ramips/patches-4.9/0066-mt7621-enable-highmem.patch b/target/linux/ramips/patches-4.9/0066-mt7621-enable-highmem.patch
new file mode 100644
index 0000000..50f32da
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0066-mt7621-enable-highmem.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -51,6 +51,7 @@ choice
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_MIPS_CPS
++ select SYS_SUPPORTS_HIGHMEM
+ select MIPS_GIC
+ select COMMON_CLK
+ select CLKSRC_MIPS_GIC
diff --git a/target/linux/ramips/patches-4.9/0067-enable-mt7621-xhci.patch b/target/linux/ramips/patches-4.9/0067-enable-mt7621-xhci.patch
new file mode 100644
index 0000000..6e13e62
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0067-enable-mt7621-xhci.patch
@@ -0,0 +1,14 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -45,9 +45,9 @@ config USB_XHCI_PLATFORM
+ If unsure, say N.
+
+ config USB_XHCI_MTK
+- tristate "xHCI support for Mediatek MT65xx"
++ tristate "xHCI support for Mediatek MT65xx/MT7621"
+ select MFD_SYSCON
+- depends on ARCH_MEDIATEK || COMPILE_TEST
++ depends on SOC_MT7621 || ARCH_MEDIATEK || COMPILE_TEST
+ ---help---
+ Say 'Y' to enable the support for the xHCI host controller
+ found in Mediatek MT65xx SoCs.
diff --git a/target/linux/ramips/patches-4.9/0068-fix-ralink-prom.c b/target/linux/ramips/patches-4.9/0068-fix-ralink-prom.c
new file mode 100644
index 0000000..728ce6f
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0068-fix-ralink-prom.c
@@ -0,0 +1,30 @@
+--- a/arch/mips/ralink/prom.c
++++ b/arch/mips/ralink/prom.c
+@@ -30,8 +30,10 @@ const char *get_system_type(void)
+ return soc_info.sys_type;
+ }
+
+-static __init void prom_init_cmdline(int argc, char **argv)
++static __init void prom_init_cmdline(void)
+ {
++ int argc;
++ char **argv;
+ int i;
+
+ pr_debug("prom: fw_arg0=%08x fw_arg1=%08x fw_arg2=%08x fw_arg3=%08x\n",
+@@ -60,14 +62,11 @@ static __init void prom_init_cmdline(int
+
+ void __init prom_init(void)
+ {
+- int argc;
+- char **argv;
+-
+ prom_soc_init(&soc_info);
+
+ pr_info("SoC Type: %s\n", get_system_type());
+
+- prom_init_cmdline(argc, argv);
++ prom_init_cmdline();
+ }
+
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ramips/patches-4.9/0069-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-4.9/0069-awake-rt305x-dwc2-controller.patch
new file mode 100644
index 0000000..1d885fb
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0069-awake-rt305x-dwc2-controller.patch
@@ -0,0 +1,15 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -616,6 +616,12 @@ static int dwc2_driver_probe(struct plat
+ if (retval)
+ return retval;
+
++ /* Enable USB port before any regs access */
++ if (dwc2_readl(hsotg->regs + PCGCTL) & 0x0f) {
++ dwc2_writel(0x00, hsotg->regs + PCGCTL);
++ /* TODO: mdelay(25) here? vendor driver don't use it */
++ }
++
+ retval = dwc2_get_dr_mode(hsotg);
+ if (retval)
+ goto error;
diff --git a/target/linux/ramips/patches-4.9/0085-pinmux-util.patch b/target/linux/ramips/patches-4.9/0085-pinmux-util.patch
new file mode 100644
index 0000000..e891bc1
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0085-pinmux-util.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -176,7 +176,7 @@ static struct rt2880_pmx_func spi_cs1_gr
+
+ static struct rt2880_pmx_func spis_grp_mt7628[] = {
+ FUNC("pwm_uart2", 3, 14, 4),
+- FUNC("util", 2, 14, 4),
++ FUNC("utif", 2, 14, 4),
+ FUNC("gpio", 1, 14, 4),
+ FUNC("spis", 0, 14, 4),
+ };
+@@ -190,28 +190,28 @@ static struct rt2880_pmx_func gpio_grp_m
+
+ static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = {
+ FUNC("jtag", 3, 30, 1),
+- FUNC("util", 2, 30, 1),
++ FUNC("utif", 2, 30, 1),
+ FUNC("gpio", 1, 30, 1),
+ FUNC("p4led_kn", 0, 30, 1),
+ };
+
+ static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = {
+ FUNC("jtag", 3, 31, 1),
+- FUNC("util", 2, 31, 1),
++ FUNC("utif", 2, 31, 1),
+ FUNC("gpio", 1, 31, 1),
+ FUNC("p3led_kn", 0, 31, 1),
+ };
+
+ static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = {
+ FUNC("jtag", 3, 32, 1),
+- FUNC("util", 2, 32, 1),
++ FUNC("utif", 2, 32, 1),
+ FUNC("gpio", 1, 32, 1),
+ FUNC("p2led_kn", 0, 32, 1),
+ };
+
+ static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = {
+ FUNC("jtag", 3, 33, 1),
+- FUNC("util", 2, 33, 1),
++ FUNC("utif", 2, 33, 1),
+ FUNC("gpio", 1, 33, 1),
+ FUNC("p1led_kn", 0, 33, 1),
+ };
+@@ -232,28 +232,28 @@ static struct rt2880_pmx_func wled_kn_gr
+
+ static struct rt2880_pmx_func p4led_an_grp_mt7628[] = {
+ FUNC("jtag", 3, 39, 1),
+- FUNC("util", 2, 39, 1),
++ FUNC("utif", 2, 39, 1),
+ FUNC("gpio", 1, 39, 1),
+ FUNC("p4led_an", 0, 39, 1),
+ };
+
+ static struct rt2880_pmx_func p3led_an_grp_mt7628[] = {
+ FUNC("jtag", 3, 40, 1),
+- FUNC("util", 2, 40, 1),
++ FUNC("utif", 2, 40, 1),
+ FUNC("gpio", 1, 40, 1),
+ FUNC("p3led_an", 0, 40, 1),
+ };
+
+ static struct rt2880_pmx_func p2led_an_grp_mt7628[] = {
+ FUNC("jtag", 3, 41, 1),
+- FUNC("util", 2, 41, 1),
++ FUNC("utif", 2, 41, 1),
+ FUNC("gpio", 1, 41, 1),
+ FUNC("p2led_an", 0, 41, 1),
+ };
+
+ static struct rt2880_pmx_func p1led_an_grp_mt7628[] = {
+ FUNC("jtag", 3, 42, 1),
+- FUNC("util", 2, 42, 1),
++ FUNC("utif", 2, 42, 1),
+ FUNC("gpio", 1, 42, 1),
+ FUNC("p1led_an", 0, 42, 1),
+ };
diff --git a/target/linux/ramips/patches-4.9/0090-ethernet.patch b/target/linux/ramips/patches-4.9/0090-ethernet.patch
new file mode 100644
index 0000000..af8ae0b
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0090-ethernet.patch
@@ -0,0 +1,41 @@
+From b6f779ea9c329451b89404583b45b9eb00155b32 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Wed, 18 Nov 2015 03:58:26 +0100
+Subject: [PATCH 510/513] net-next: mediatek: add Kconfig and Makefile
+
+This patch adds the Makefile and Kconfig required to make the driver build.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+Signed-off-by: Felix Fietkau <nbd at nbd.name>
+Signed-off-by: Michael Lee <igvtee at gmail.com>
+---
+ drivers/net/ethernet/Kconfig | 1 +
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/mtk/Kconfig | 62 ++++++++++++++++++++++++++++++++
+ drivers/net/ethernet/mtk/Makefile | 20 +++++++++++
+ 4 files changed, 84 insertions(+)
+ create mode 100644 drivers/net/ethernet/mtk/Kconfig
+ create mode 100644 drivers/net/ethernet/mtk/Makefile
+
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -107,7 +107,7 @@
+ Support for the MII0 inside the Lantiq SoC
+
+ source "drivers/net/ethernet/marvell/Kconfig"
+-source "drivers/net/ethernet/mediatek/Kconfig"
++source "drivers/net/ethernet/mtk/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+ source "drivers/net/ethernet/micrel/Kconfig"
+ source "drivers/net/ethernet/microchip/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -47,7 +47,7 @@
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+-obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
++obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mtk/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+ obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
diff --git a/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch b/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch
new file mode 100644
index 0000000..d2d8eeb
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch
@@ -0,0 +1,19 @@
+--- a/arch/mips/pci/pci-mt7620.c
++++ b/arch/mips/pci/pci-mt7620.c
+@@ -33,7 +33,6 @@
+ #define RALINK_GPIOMODE 0x60
+
+ #define PPLL_CFG1 0x9c
+-#define PDRV_SW_SET BIT(23)
+
+ #define PPLL_DRV 0xa0
+ #define PDRV_SW_SET (1<<31)
+@@ -121,7 +120,7 @@
+ else
+ break;
+ if (retry++ > WAITRETRY_MAX) {
+- printk(KERN_WARN "PCIE-PHY retry failed.\n");
++ pr_warn("PCIE-PHY retry failed.\n");
+ return -1;
+ }
+ }
diff --git a/target/linux/ramips/patches-4.9/0100-prom_fixes.patch b/target/linux/ramips/patches-4.9/0100-prom_fixes.patch
new file mode 100644
index 0000000..50eeeea
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0100-prom_fixes.patch
@@ -0,0 +1,66 @@
+From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 4 Aug 2014 18:46:02 +0200
+Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -3,7 +3,7 @@
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+- * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2008-2014 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2013 John Crispin <john at phrozen.org>
+ */
+@@ -66,6 +66,19 @@ static int __init early_init_dt_find_mem
+ return 0;
+ }
+
++static int chosen_dtb;
++
++static int __init early_init_dt_find_chosen(unsigned long node, const char *uname,
++ int depth, void *data)
++{
++ if (depth == 1 && !strcmp(uname, "chosen"))
++ chosen_dtb = 1;
++
++ return 0;
++}
++
++extern struct boot_param_header __image_dtb;
++
+ void __init plat_mem_setup(void)
+ {
+ set_io_port_base(KSEG1);
+@@ -74,7 +87,11 @@ void __init plat_mem_setup(void)
+ * Load the builtin devicetree. This causes the chosen node to be
+ * parsed resulting in our memory appearing
+ */
+- __dt_setup_arch(__dtb_start);
++ __dt_setup_arch(&__image_dtb);
++
++ of_scan_flat_dt(early_init_dt_find_chosen, NULL);
++ if (chosen_dtb)
++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -85,6 +85,9 @@ EXPORT(__image_cmdline)
+ .fill 0x400
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
+
++ .ascii "OWRTDTB:"
++ EXPORT(__image_dtb)
++ .fill 0x4000
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
diff --git a/target/linux/ramips/patches-4.9/0105-set_mt7621_soc_type.patch b/target/linux/ramips/patches-4.9/0105-set_mt7621_soc_type.patch
new file mode 100644
index 0000000..68c56fa
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0105-set_mt7621_soc_type.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -181,7 +181,7 @@ void prom_soc_init(struct ralink_soc_inf
+ } else {
+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+-
++ ralink_soc = MT762X_SOC_MT7621AT;
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
diff --git a/target/linux/ramips/patches-4.9/0200-linkit_bootstrap.patch b/target/linux/ramips/patches-4.9/0200-linkit_bootstrap.patch
new file mode 100644
index 0000000..4fd5448
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0200-linkit_bootstrap.patch
@@ -0,0 +1,97 @@
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_ECHO) += echo/
+ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
+ obj-$(CONFIG_CXL_BASE) += cxl/
+ obj-$(CONFIG_PANEL) += panel.o
++obj-$(CONFIG_SOC_MT7620) += linkit.o
+
+ lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
+ lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
+--- /dev/null
++++ b/drivers/misc/linkit.c
+@@ -0,0 +1,84 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2015 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/mtd/mtd.h>
++#include <linux/gpio.h>
++
++#define LINKIT_LATCH_GPIO 11
++
++struct linkit_hw_data {
++ char board[16];
++ char rev[16];
++};
++
++static void sanify_string(char *s)
++{
++ int i;
++
++ for (i = 0; i < 15; i++)
++ if (s[i] <= 0x20)
++ s[i] = '\0';
++ s[15] = '\0';
++}
++
++static int linkit_probe(struct platform_device *pdev)
++{
++ struct linkit_hw_data hw;
++ struct mtd_info *mtd;
++ size_t retlen;
++ int ret;
++
++ mtd = get_mtd_device_nm("factory");
++ if (IS_ERR(mtd))
++ return PTR_ERR(mtd);
++
++ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
++ put_mtd_device(mtd);
++
++ sanify_string(hw.board);
++ sanify_string(hw.rev);
++
++ dev_info(&pdev->dev, "Version : %s\n", hw.board);
++ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
++
++ if (!strcmp(hw.board, "LINKITS7688")) {
++ dev_info(&pdev->dev, "setting up bootstrap latch\n");
++
++ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
++ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
++ return -1;
++ }
++ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id linkit_match[] = {
++ { .compatible = "mediatek,linkit" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, linkit_match);
++
++static struct platform_driver linkit_driver = {
++ .probe = linkit_probe,
++ .driver = {
++ .name = "mtk-linkit",
++ .owner = THIS_MODULE,
++ .of_match_table = linkit_match,
++ },
++};
++
++int __init linkit_init(void)
++{
++ return platform_driver_register(&linkit_driver);
++}
++late_initcall_sync(linkit_init);
diff --git a/target/linux/ramips/patches-4.9/0700-pinctrl-mt7620-mdio-as-refclk.patch b/target/linux/ramips/patches-4.9/0700-pinctrl-mt7620-mdio-as-refclk.patch
new file mode 100644
index 0000000..e87e979
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0700-pinctrl-mt7620-mdio-as-refclk.patch
@@ -0,0 +1,42 @@
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -115,9 +115,14 @@
+ #define MT7620_GPIO_MODE_WDT_MASK 0x3
+ #define MT7620_GPIO_MODE_WDT_SHIFT 21
+
++#define MT7620_GPIO_MODE_MDIO 0
++#define MT7620_GPIO_MODE_MDIO_REFCLK 1
++#define MT7620_GPIO_MODE_MDIO_GPIO 2
++#define MT7620_GPIO_MODE_MDIO_MASK 0x3
++#define MT7620_GPIO_MODE_MDIO_SHIFT 7
++
+ #define MT7620_GPIO_MODE_I2C 0
+ #define MT7620_GPIO_MODE_UART1 5
+-#define MT7620_GPIO_MODE_MDIO 8
+ #define MT7620_GPIO_MODE_RGMII1 9
+ #define MT7620_GPIO_MODE_RGMII2 10
+ #define MT7620_GPIO_MODE_SPI 11
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -55,7 +55,10 @@ static int dram_type;
+ static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
+ static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
+ static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
+-static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func mdio_grp[] = {
++ FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
++ FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
++};
+ static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
+ static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
+ static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
+@@ -92,7 +95,8 @@ static struct rt2880_pmx_group mt7620a_p
+ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
+ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
+ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
+- GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
++ GRP_G("mdio", mdio_grp, MT7620_GPIO_MODE_MDIO_MASK,
++ MT7620_GPIO_MODE_MDIO_GPIO, MT7620_GPIO_MODE_MDIO_SHIFT),
+ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
+ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
+ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
diff --git a/target/linux/ramips/patches-4.9/0720-arch-mips-ralink-add-i2c-clocks.patch b/target/linux/ramips/patches-4.9/0720-arch-mips-ralink-add-i2c-clocks.patch
new file mode 100644
index 0000000..e9e72ad
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0720-arch-mips-ralink-add-i2c-clocks.patch
@@ -0,0 +1,67 @@
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -513,6 +513,7 @@ void __init ralink_clk_init(void)
+ unsigned long sys_rate;
+ unsigned long dram_rate;
+ unsigned long periph_rate;
++ unsigned long pcmi2s_rate;
+
+ xtal_rate = mt7620_get_xtal_rate();
+
+@@ -527,6 +528,7 @@ void __init ralink_clk_init(void)
+ cpu_rate = MHZ(575);
+ dram_rate = sys_rate = cpu_rate / 3;
+ periph_rate = MHZ(40);
++ pcmi2s_rate = MHZ(480);
+
+ ralink_clk_add("10000d00.uartlite", periph_rate);
+ ralink_clk_add("10000e00.uartlite", periph_rate);
+@@ -538,6 +540,7 @@ void __init ralink_clk_init(void)
+ dram_rate = mt7620_get_dram_rate(pll_rate);
+ sys_rate = mt7620_get_sys_rate(cpu_rate);
+ periph_rate = mt7620_get_periph_rate(xtal_rate);
++ pcmi2s_rate = periph_rate;
+
+ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+ RINT(xtal_rate), RFRAC(xtal_rate),
+@@ -559,6 +562,8 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", periph_rate);
+ ralink_clk_add("10000120.watchdog", periph_rate);
++ ralink_clk_add("10000900.i2c", periph_rate);
++ ralink_clk_add("10000a00.i2s", pcmi2s_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", periph_rate);
+--- a/arch/mips/ralink/rt288x.c
++++ b/arch/mips/ralink/rt288x.c
+@@ -75,6 +75,7 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("300100.timer", cpu_rate / 2);
+ ralink_clk_add("300120.watchdog", cpu_rate / 2);
+ ralink_clk_add("300500.uart", cpu_rate / 2);
++ ralink_clk_add("300900.i2c", cpu_rate / 2);
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
+ ralink_clk_add("480000.wmac", wmac_rate);
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -200,6 +200,8 @@ void __init ralink_clk_init(void)
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("sys", sys_rate);
++ ralink_clk_add("10000900.i2c", uart_rate);
++ ralink_clk_add("10000a00.i2s", uart_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
+ ralink_clk_add("10000100.timer", wdt_rate);
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -108,6 +108,8 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10000100.timer", sys_rate);
+ ralink_clk_add("10000120.watchdog", sys_rate);
+ ralink_clk_add("10000500.uart", 40000000);
++ ralink_clk_add("10000900.i2c", 40000000);
++ ralink_clk_add("10000a00.i2s", 40000000);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", 40000000);
diff --git a/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch b/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch
new file mode 100644
index 0000000..3f06afb
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch
@@ -0,0 +1,43 @@
+From 8b61a1a33e41456ebeafa0ebe7ec0fccf859861e Mon Sep 17 00:00:00 2001
+From: Nikolay Martynov <mar.kolya at gmail.com>
+Date: Wed, 25 Nov 2015 20:43:46 -0500
+Subject: [PATCH] mtd: nand: Fix Spansion sparearea size detection
+
+According to datasheet S34ML02G2 and S34ML04G2 have
+larger sparea area size than was detected.
+
+Signed-off-by: Nikolay Martynov <mar.kolya at gmail.com>
+---
+ drivers/mtd/nand/nand_base.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -3767,6 +3767,7 @@ static void nand_decode_ext_id(struct mt
+ /*
+ * Field definitions are in the following datasheets:
+ * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
++ * Spansion S34ML02G2 (p.33)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
+ *
+@@ -3864,6 +3865,19 @@ static void nand_decode_ext_id(struct mt
+ *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+
+ /*
++ * Spansion S34ML0[24]G2 have oobsize twice as large
++ * as S34ML01G2 encoded in the same bit. We
++ * differinciate them by their ID length
++ */
++ if (id_data[0] == NAND_MFR_AMD
++ && (id_data[1] == 0xda
++ || id_data[1] == 0xdc
++ || id_data[1] == 0xca
++ || id_data[1] == 0xcc)) {
++ mtd->oobsize *= 2;
++ }
++
++ /*
+ * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
+ * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
+ * follows:
diff --git a/target/linux/ramips/patches-4.9/100-mt7621-core-detect-hack.patch b/target/linux/ramips/patches-4.9/100-mt7621-core-detect-hack.patch
new file mode 100644
index 0000000..a3224fd
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/100-mt7621-core-detect-hack.patch
@@ -0,0 +1,61 @@
+There is a variant of MT7621 which contains only one CPU core instead of 2.
+This is not reflected in the config register, so the kernel detects more
+physical cores, which leads to a hang on SMP bringup.
+Add a hack to detect missing cores.
+
+Signed-off-by: Felix Fietkau <nbd at nbd.name>
+
+--- a/arch/mips/kernel/smp-cps.c
++++ b/arch/mips/kernel/smp-cps.c
+@@ -56,6 +56,11 @@ static unsigned core_vpe_count(unsigned
+ return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
+ }
+
++bool __weak plat_cpu_core_present(int core)
++{
++ return true;
++}
++
+ static void __init cps_smp_setup(void)
+ {
+ unsigned int ncores, nvpes, core_vpes;
+@@ -66,6 +71,8 @@ static void __init cps_smp_setup(void)
+ ncores = mips_cm_numcores();
+ pr_info("%s topology ", cpu_has_mips_r6 ? "VP" : "VPE");
+ for (c = nvpes = 0; c < ncores; c++) {
++ if (!plat_cpu_core_present(c))
++ continue;
+ core_vpes = core_vpe_count(c);
+ pr_cont("%c%u", c ? ',' : '{', core_vpes);
+
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -17,6 +17,7 @@
+ #include <asm/mips-cpc.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/mt7621.h>
++#include <asm/mips-boards/launch.h>
+
+ #include <pinmux.h>
+
+@@ -164,6 +165,20 @@ void __init ralink_of_remap(void)
+ panic("Failed to remap core resources");
+ }
+
++bool plat_cpu_core_present(int core)
++{
++ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
++
++ if (!core)
++ return true;
++ launch += core * 2; /* 2 VPEs per core */
++ if (!(launch->flags & LAUNCH_FREADY))
++ return false;
++ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE))
++ return false;
++ return true;
++}
++
+ void prom_soc_init(struct ralink_soc_info *soc_info)
+ {
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
diff --git a/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch b/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
new file mode 100644
index 0000000..aa55fd9
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
@@ -0,0 +1,21 @@
+From 2583143af8111d430bdca0268b6cdb7ccc7c3f9d Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Fri, 13 Jan 2017 05:40:04 +0100
+Subject: [PATCH] mips: ralink/rt3883: fix typo in pinctrl lna_g_func
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+---
+ arch/mips/ralink/rt3883.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f
+ static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+ static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+ static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
+-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
++static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
+ static struct rt2880_pmx_func pci_func[] = {
+ FUNC("pci-dev", 0, 40, 32),
+ FUNC("pci-host2", 1, 40, 32),
diff --git a/target/linux/ramips/patches-4.9/301-fix-rt3883.patch b/target/linux/ramips/patches-4.9/301-fix-rt3883.patch
new file mode 100644
index 0000000..100dd62
--- /dev/null
+++ b/target/linux/ramips/patches-4.9/301-fix-rt3883.patch
@@ -0,0 +1,26 @@
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -63,16 +63,6 @@
+ { 0 }
+ };
+
+-static void rt3883_wdt_reset(void)
+-{
+- u32 t;
+-
+- /* enable WDT reset output on GPIO 2 */
+- t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+- t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+- rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+-}
+-
+ void __init ralink_clk_init(void)
+ {
+ unsigned long cpu_rate, sys_rate;
+@@ -157,5 +147,5 @@
+
+ rt2880_pinmux_data = rt3883_pinmux_data;
+
+- ralink_soc == RT3883_SOC;
++ ralink_soc = RT3883_SOC;
+ }
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/rt288x/config-4.9
similarity index 65%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/rt288x/config-4.9
index 383370b..5864009 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/rt288x/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +8,42 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_RT2880_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -68,10 +55,9 @@ CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
+CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +69,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,89 +84,66 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NET_MEDIATEK_MDIO_RT2880=y
+CONFIG_NET_MEDIATEK_RT2880=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NLS=m
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -191,13 +152,12 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
@@ -205,65 +165,47 @@ CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
+# CONFIG_SG_POOL is not set
# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
-# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_MT7621 is not set
+CONFIG_SOC_RT288X=y
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_EHCI_PCI=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PCI=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/rt305x/config-4.9
similarity index 64%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/rt305x/config-4.9
index 383370b..feacc95 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/rt305x/config-4.9
@@ -1,7 +1,6 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +8,46 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
-# CONFIG_CEVT_SYSTICK_QUIRK is not set
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_RT305X_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -64,14 +55,14 @@ CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
+CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +74,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,170 +89,111 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_RAW_APPENDED_DTB is not set
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_MEDIATEK_ESW_RT3050=y
+CONFIG_NET_MEDIATEK_RT3050=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+# CONFIG_RALINK_ILL_ACC is not set
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
+# CONFIG_SG_POOL is not set
# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
+# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
+CONFIG_SOC_RT305X=y
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/rt3883/config-4.9
similarity index 66%
copy from target/linux/ramips/mt7621/config-4.4
copy to target/linux/ramips/rt3883/config-4.9
index 383370b..eb77d34 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/rt3883/config-4.9
@@ -1,7 +1,7 @@
+CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
@@ -9,54 +9,44 @@ CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
+# CONFIG_DTB_RT3883_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -64,14 +54,14 @@ CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
+CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
@@ -83,16 +73,14 @@ CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -100,89 +88,64 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_MT7621=y
-# CONFIG_IMG_MDC_DMA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
-CONFIG_MIPS_CPC=y
-CONFIG_MIPS_CPS=y
-# CONFIG_MIPS_CPS_NS16550 is not set
-CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_RAW_APPENDED_DTB is not set
CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_GSW_MT7621=y
+CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7621=y
+CONFIG_NET_MEDIATEK_MDIO_RT2880=y
+CONFIG_NET_MEDIATEK_RT3883=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
@@ -191,79 +154,54 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
-# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
+CONFIG_RTL8367_PHY=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
-CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
+# CONFIG_SG_POOL is not set
# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
+# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
+CONFIG_SOC_RT3883=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
+CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
More information about the lede-commits
mailing list