[source] lantiq: fix patching the wifi mac address on BTHOMEHUBV3A

[LEDE Commits]

mkresin pushed a commit to source.git, branch lede-17.01:
https://git.lede-project.org/32c9d467e341bae3e67329fb7503200900562ec2

commit 32c9d467e341bae3e67329fb7503200900562ec2
Author: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
AuthorDate: Sun Feb 12 22:29:16 2017 +0000

    lantiq: fix patching the wifi mac address on BTHOMEHUBV3A
    
    The firmware hotplug script tries to read the mac address from a
    partition with the name "uboot-env" which does not exist (instead it's
    name is uboot_env). This broke calculation of the new checksum (after
    patching the mac address) which resulted in ath9k refusing to use the
    EEPROM data.
    
    The original error reported by ath9k was:
    PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
    ath: phy0: Bad EEPROM checksum 0x2523
    ath: phy0: Unable to initialize hardware; initialization status: -22
    ath9k 0000:00:0e.0: Failed to initialize device
    
    Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
    binding/owl-loader")
    
    Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index fa52dd5..1c6b066 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -129,7 +129,7 @@ case "$FIRMWARE" in
 				;;
 			BTHOMEHUBV3A)
 				ath9k_eeprom_extract "art-copy" 0 1
-				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268
+				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268
 				;;
 			BTHOMEHUBV5A)
 				ath9k_ubi_eeprom_extract "caldata" 4096 0