[source] x86: Add configuration back for Traverse Geos

LEDE Commits lede-commits at lists.infradead.org
Sat Feb 11 11:58:02 PST 2017


nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/657418db68fe2be89bdba2a147a08168d7a760ba

commit 657418db68fe2be89bdba2a147a08168d7a760ba
Author: David Woodhouse <dwmw2 at infradead.org>
AuthorDate: Fri Feb 10 11:41:30 2017 +0000

    x86: Add configuration back for Traverse Geos
    
    When we merged all the Geode boards into one generic target, the default
    network and LED configuration was lost. Put it back.
    
    Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one")
    Signed-off-by: David Woodhouse <dwmw2 at infradead.org>
---
 .../linux/x86/geode/base-files/etc/board.d/01_leds | 21 +++++++++++++++++++
 .../x86/geode/base-files/etc/board.d/02_network    | 24 ++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/target/linux/x86/geode/base-files/etc/board.d/01_leds b/target/linux/x86/geode/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000..8a1a1e0
--- /dev/null
+++ b/target/linux/x86/geode/base-files/etc/board.d/01_leds
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# Copyright © 2017 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(cat /tmp/sysinfo/board_name) 2>/dev/null
+
+case "$board" in
+traverse-technologies-geos)
+	ucidef_set_led_netdev "lan" "LAN" "geos:1" "br-lan" "tx rx"
+	ucidef_set_led_netdev "wlan" "WiFi" "geos:2" "phy0tpt"
+	ucidef_set_led_default "diag" "DIAG" "geos:3" "0"
+	;;
+esac
+board_config_flush
+
+exit 0
diff --git a/target/linux/x86/geode/base-files/etc/board.d/02_network b/target/linux/x86/geode/base-files/etc/board.d/02_network
new file mode 100755
index 0000000..dcce0fa
--- /dev/null
+++ b/target/linux/x86/geode/base-files/etc/board.d/02_network
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# Copyright © 2017 OpenWrt.org
+#
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board="$(cat /tmp/sysinfo/board_name)" 2>/dev/null
+
+case "$board" in
+traverse-technologies-geos)
+	ucidef_set_interface_lan "eth0 eth1"
+	ucidef_add_atm_bridge "0" "35" "llc" "bridged"
+	ucidef_set_interface_wan "nas0" "dhcp"
+	macaddr="$(cat /sys/class/net/eth0/address)" 2>/dev/null
+	[ -n "$macaddr" ] && ucidef_set_interface_macaddr "wan" "$macaddr"
+	;;
+esac
+board_config_flush
+
+exit 0



More information about the lede-commits mailing list