[source] ramips: add helper variable for boardname
LEDE Commits
lede-commits at lists.infradead.org
Wed Dec 20 16:06:21 PST 2017
mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/ad002c397ac34ed421bec324ec71c9ab96e59701
commit ad002c397ac34ed421bec324ec71c9ab96e59701
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Thu Nov 16 22:17:42 2017 +0100
ramips: add helper variable for boardname
Add a helper variable which contains the boardname separated from the
vendor name. It allows to switch to a device tree compatible string
based boardname, by keeping the $board:colour:function syntax in
scripts handling/adding config for LEDs.
Boards not using the device tree compatible string as based boardname
are unaffected by the change, since none of them uses a comma in the
boardname.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 359 +++++++++++----------
target/linux/ramips/base-files/etc/diag.sh | 91 +++---
2 files changed, 226 insertions(+), 224 deletions(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0c97dc9..671a578 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -12,6 +12,7 @@ set_wifi_led() {
board=$(board_name)
+boardname="${board##*,}"
board_config_update
@@ -25,35 +26,35 @@ sap-g3200u3|\
sk-wb8|\
w2914nsv2|\
wf-2881)
- set_usb_led "$board:green:usb"
+ set_usb_led "$boardname:green:usb"
;;
3g150b|\
3g300m)
- set_usb_led "$board:blue:3g"
+ set_usb_led "$boardname:blue:3g"
;;
3g-6200n)
- set_wifi_led "$board:amber:wlan"
- set_usb_led "$board:blue:3g"
+ set_wifi_led "$boardname:amber:wlan"
+ set_usb_led "$boardname:blue:3g"
;;
3g-6200nl|\
wnce2001)
- set_wifi_led "$board:green:wlan"
+ set_wifi_led "$boardname:green:wlan"
;;
br-6475nd|\
mzk-w300nh2)
- set_wifi_led "$board:amber:wlan"
+ set_wifi_led "$boardname:amber:wlan"
;;
a5-v11|\
cs-qr10)
- ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
+ ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
;;
ai-br100)
- ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" "eth0.2"
- set_wifi_led "$board:blue:wlan"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan"
;;
air3gii)
- set_wifi_led "$board:green:wlan"
- set_usb_led "$board:green:mobile"
+ set_wifi_led "$boardname:green:wlan"
+ set_usb_led "$boardname:green:mobile"
;;
all0256n-4M|\
all0256n-8M)
@@ -76,66 +77,66 @@ asl26555-16M)
set_usb_led "asl26555:green:3g"
;;
bc2)
- set_usb_led "$board:blue:usb"
+ set_usb_led "$boardname:blue:usb"
;;
broadway)
- set_usb_led "$board:red:diskmounted"
- set_wifi_led "$board:red:wps_active"
+ set_usb_led "$boardname:red:diskmounted"
+ set_wifi_led "$boardname:red:wps_active"
;;
c108)
- ucidef_set_led_netdev "lan" "lan" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "modem" "modem" "$board:green:modem" "wwan0"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
+ ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
;;
c20)
- ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
- set_usb_led "$board:blue:usb"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:blue:wlan2g" "wlan0"
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
c20i)
- ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
- set_usb_led "$board:blue:usb" "2-1"
- ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ set_usb_led "$boardname:blue:usb" "2-1"
+ ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
;;
c50)
- ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
- set_usb_led "$board:green:usb"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
- set_wifi_led "$board:green:wlan5g"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ set_usb_led "$boardname:green:usb"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
+ set_wifi_led "$boardname:green:wlan5g"
;;
cf-wr800n)
- ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
- set_wifi_led "$board:white:wifi"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
+ set_wifi_led "$boardname:white:wifi"
;;
cy-swr1100)
- ucidef_set_led_default "wps" "WPS" "$board:blue:wps" "0"
- set_usb_led "$board:blue:usb"
+ ucidef_set_led_default "wps" "WPS" "$boardname:blue:wps" "0"
+ set_usb_led "$boardname:blue:usb"
;;
d105)
- ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
- set_usb_led "$board:green:usb"
+ ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
+ set_usb_led "$boardname:green:usb"
;;
d240)
- set_wifi_led "$board:blue:wifi"
- set_usb_led "$board:blue:usb"
+ set_wifi_led "$boardname:blue:wifi"
+ set_usb_led "$boardname:blue:usb"
;;
db-wrt01)
- ucidef_set_led_default "power" "power" "$board:orange:power" "1"
+ ucidef_set_led_default "power" "power" "$boardname:orange:power" "1"
;;
dch-m225)
ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1"
ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
;;
dcs-930l-b1)
- ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
- ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"
+ ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
+ ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
;;
dir-300-b1|\
dir-600-b1|\
dir-620-a1)
- ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
+ ucidef_set_led_default "wan" "WAN LED (amber)" "$boardname:amber:wan" "1"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-300-b7|\
@@ -152,165 +153,165 @@ wt1520-8M)
;;
dir-615-d|\
dir-615-h1)
- ucidef_set_led_default "status" "Status LED (amber)" "$board:amber:status" "0"
+ ucidef_set_led_default "status" "Status LED (amber)" "$boardname:amber:status" "0"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-620-d1|\
mzk-ex300np)
- set_wifi_led "$board:green:wifi"
+ set_wifi_led "$boardname:green:wifi"
;;
dir-810l|\
mzk-750dhp|\
mzk-dp150n|\
vr500)
- ucidef_set_led_default "power" "power" "$board:green:power" "1"
+ ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
;;
dir-860l-b1)
- ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
;;
ex2700|\
wn3000rpv3)
- set_wifi_led "$board:green:router"
+ set_wifi_led "$boardname:green:router"
;;
ex3700)
- ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$board:green:router" "wlan0"
- ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$board:green:device" "wlan1"
+ ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
+ ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
;;
f5d8235-v1)
- ucidef_set_led_default "lan" "lan" "$board:blue:wired" "0"
- set_usb_led "$board:blue:storage"
- set_wifi_led "$board:blue:wireless"
+ ucidef_set_led_default "lan" "lan" "$boardname:blue:wired" "0"
+ set_usb_led "$boardname:blue:storage"
+ set_wifi_led "$boardname:blue:wireless"
;;
f5d8235-v2)
- set_usb_led "$board:blue:storage"
+ set_usb_led "$boardname:blue:storage"
;;
fonera20n)
- set_usb_led "$board:orange:usb"
- set_wifi_led "$board:orange:wifi"
+ set_usb_led "$boardname:orange:usb"
+ set_wifi_led "$boardname:orange:wifi"
;;
gb-pc1)
- ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01"
- ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)
- set_wifi_led "$board:wlan"
+ set_wifi_led "$boardname:wlan"
;;
gl-mt300n-v2)
- set_wifi_led "$board:red:wlan"
+ set_wifi_led "$boardname:red:wlan"
;;
hc5661|\
hc5661a)
- ucidef_set_led_default "system" "system" "$board:blue:system" "1"
- ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
- set_wifi_led "$board:blue:wlan2g"
+ ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan2g"
;;
hc5761)
- ucidef_set_led_default "system" "system" "$board:blue:system" "1"
- ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
- set_wifi_led "$board:blue:wlan2g"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
+ ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan2g"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
;;
hc5861)
- ucidef_set_led_default "system" "system" "$board:blue:system" "1"
- ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
- set_wifi_led "$board:blue:wlan2g"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
- ucidef_set_led_default "turbo" "turbo" "$board:blue:turbo" "0"
+ ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan2g"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
+ ucidef_set_led_default "turbo" "turbo" "$boardname:blue:turbo" "0"
;;
hg255d)
- set_wifi_led "$board:green:wlan"
- set_usb_led "$board:green:usb"
- ucidef_set_led_netdev "internet" "internet" "$board:green:internet" "eth0.2"
+ set_wifi_led "$boardname:green:wlan"
+ set_usb_led "$boardname:green:usb"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
;;
hpm)
- ucidef_set_led_default "power" "POWER" "$board:orange:power" "1"
- ucidef_set_led_netdev "eth" "ETH" "$board:green:eth" "eth0"
- set_wifi_led "$board:green:wifi"
+ ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1"
+ ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
+ set_wifi_led "$boardname:green:wifi"
;;
ht-tm02)
- ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
- set_wifi_led "$board:blue:wlan"
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
+ set_wifi_led "$boardname:blue:wlan"
;;
kn|\
nbg-419n2)
- set_usb_led "$board:green:usb"
+ set_usb_led "$boardname:green:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
kn_rc|\
kn_rf|\
kng_rc)
- set_usb_led "$board:green:usb"
- set_wifi_led "$board:green:wifi"
+ set_usb_led "$boardname:green:usb"
+ set_wifi_led "$boardname:green:wifi"
;;
m2m)
- set_wifi_led "$board:blue:wifi"
- ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
;;
miniembplug)
- set_wifi_led "$board:red:wlan"
- set_usb_led "$board:green:mobile"
+ set_wifi_led "$boardname:red:wlan"
+ set_usb_led "$boardname:green:mobile"
;;
mir3g)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "$board:amber:wan" "switch0" "0x02" "0x08"
- ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$board:amber:lan1" "switch0" "0x08" "0x08"
- ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$board:amber:lan2" "switch0" "0x04" "0x08"
+ ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
+ ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
+ ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
;;
miwifi-mini)
- ucidef_set_led_default "power" "power" "$board:red:status" "1"
+ ucidef_set_led_default "power" "power" "$boardname:red:status" "1"
;;
mlw221|\
mlwg2)
- set_wifi_led "$board:blue:wifi"
- ucidef_set_led_default "system" "system" "$board:blue:system" "1"
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
;;
mpr-a1|\
mpr-a2)
- set_wifi_led "$board:blue:system"
+ set_wifi_led "$boardname:blue:system"
;;
mr-102n)
- set_wifi_led "$board:green:wlan"
- set_usb_led "$board:green:usb"
+ set_wifi_led "$boardname:green:wlan"
+ set_usb_led "$boardname:green:usb"
;;
mr200)
- ucidef_set_led_default "power" "power" "$board:white:power" "1"
- ucidef_set_led_netdev "lan" "lan" "$board:white:lan" "eth0.1"
- ucidef_set_led_netdev "wan" "wan" "$board:white:wan" "usb0"
- set_wifi_led "$board:white:wlan"
+ ucidef_set_led_default "power" "power" "$boardname:white:power" "1"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
+ set_wifi_led "$boardname:white:wlan"
;;
mzk-ex750np)
- ucidef_set_led_default "power" "power" "$board:red:power" "1"
- set_wifi_led "$board:red:wifi"
+ ucidef_set_led_default "power" "power" "$boardname:red:power" "1"
+ set_wifi_led "$boardname:red:wifi"
;;
na930)
- set_usb_led "$board:blue:status"
+ set_usb_led "$boardname:blue:status"
;;
newifi-d1)
- set_usb_led "$board:red:status"
+ set_usb_led "$boardname:red:status"
;;
nw718)
- set_usb_led "$board:amber:usb"
+ set_usb_led "$boardname:amber:usb"
;;
oy-0001)
- ucidef_set_led_default "power" "power" "$board:green:power" "1"
- set_wifi_led "$board:green:wifi"
+ ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
+ set_wifi_led "$boardname:green:wifi"
;;
pbr-d1)
- set_usb_led "$board:orange:usb"
+ set_usb_led "$boardname:orange:usb"
;;
pbr-m1)
- ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
- ucidef_set_led_default "power" "power" "$board:blue:power" "1"
- ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
+ ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1"
;;
psg1208)
- set_wifi_led "$board:white:wlan2g"
+ set_wifi_led "$boardname:white:wlan2g"
;;
psg1218a|\
psg1218b)
- ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
- ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
+ ucidef_set_led_netdev "Network" "Network" "$boardname:blue:status" "eth0"
+ ucidef_set_led_default "status" "STATUS" "$boardname:yellow:status" "0"
;;
px-4885-4M|\
px-4885-8M)
@@ -318,27 +319,27 @@ px-4885-8M)
set_usb_led "px-4885:blue:storage"
;;
r6220)
- ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
- set_wifi_led "$board:green:wifi"
- set_usb_led "$board:green:usb"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
+ set_wifi_led "$boardname:green:wifi"
+ set_usb_led "$boardname:green:usb"
;;
re350-v1)
- ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$board:blue:wifi2G" "wlan0"
- ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$board:blue:wifi5G" "wlan1"
- ucidef_set_led_netdev "eth_act" "LAN act" "$board:green:eth_act" "eth0" "tx rx"
- ucidef_set_led_switch "eth_link" "LAN link" "$board:green:eth_link" "switch0" "0x01"
+ ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
+ ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
+ ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
+ ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
;;
re6500)
- ucidef_set_led_default "power" "power" "$board:white:power" "1"
- ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
+ ucidef_set_led_default "power" "power" "$boardname:white:power" "1"
+ ucidef_set_led_default "wifi" "wifi" "$boardname:orange:wifi" "1"
;;
rp-n53)
- ucidef_set_led_netdev "eth" "Network" "$board:white:back" "eth0"
- set_wifi_led "$board:blue:wifi"
+ ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
+ set_wifi_led "$boardname:blue:wifi"
;;
rt-ac51u)
- set_wifi_led "$board:blue:wifi"
- set_usb_led "$board:blue:usb" "1-1"
+ set_wifi_led "$boardname:blue:wifi"
+ set_usb_led "$boardname:blue:usb" "1-1"
;;
rt-n12p)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
@@ -347,32 +348,32 @@ rt-n12p)
set_wifi_led "$board:green:air"
;;
rt-n14u)
- ucidef_set_led_default "power" "power" "$board:blue:power" "1"
- ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
- ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" eth0.2
- set_wifi_led "$board:blue:air"
- set_usb_led "$board:blue:usb"
+ ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
+ set_wifi_led "$boardname:blue:air"
+ set_usb_led "$boardname:blue:usb"
;;
tew-714tru)
- set_usb_led "$board:red:usb"
- set_wifi_led "$board:green:wifi"
+ set_usb_led "$boardname:red:usb"
+ set_wifi_led "$boardname:green:wifi"
;;
tiny-ac)
- set_wifi_led "$board:orange:wifi"
- set_usb_led "$board:green:usb"
+ set_wifi_led "$boardname:orange:wifi"
+ set_usb_led "$boardname:green:usb"
;;
tl-wr840n-v4)
- set_wifi_led "$board:green:wlan"
- ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tl-wr841n-v13)
- set_wifi_led "$board:green:wlan"
- ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x2"
- ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x4"
- ucidef_set_led_switch "lan3" "lan3" "$board:green:lan3" "switch0" "0x8"
- ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10"
- ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
u25awf-h1)
set_wifi_led "u25awf:red:wifi"
@@ -393,17 +394,17 @@ vocore-16M)
set_wifi_led "vocore:green:status"
;;
vocore2)
- set_wifi_led "$board:fuchsia:status"
+ set_wifi_led "$boardname:fuchsia:status"
;;
vocore2lite)
- set_wifi_led "$board:green:status"
+ set_wifi_led "$boardname:green:status"
;;
w502u)
- set_usb_led "$board:blue:usb"
+ set_usb_led "$boardname:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
wcr-150gn)
- set_usb_led "$board:amber:user"
+ set_usb_led "$boardname:amber:user"
;;
we1026-5g-16m)
ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
@@ -413,54 +414,54 @@ we1026-5g-16m)
whr-1166d|\
whr-300hp2|\
whr-600d)
- ucidef_set_led_default "power" "power" "$board:green:power" "1"
- ucidef_set_led_default "router" "router" "$board:green:router" "1"
+ ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
+ ucidef_set_led_default "router" "router" "$boardname:green:router" "1"
;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "200000" "1"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49"
- ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100"
+ ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
+ ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
+ ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
;;
wrh-300cr)
- set_wifi_led "$board:green:wlan"
- ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
;;
wndr3700v5)
- ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
+ ucidef_set_led_default "power" "POWER" "$boardname:green:power" "0"
;;
wt3020-4M|\
wt3020-8M)
ucidef_set_led_default "power" "power" "wt3020:blue:power" "0"
;;
y1)
- set_usb_led "$board:blue:usb"
- ucidef_set_led_netdev "wifi" "WIFI" "$board:blue:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi5g" "wlan0"
- ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0.1" "tx rx"
- ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0.1" "tx rx"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
;;
y1s)
- set_usb_led "$board:blue:usb"
- ucidef_set_led_netdev "wifi" "WIFI" "$board:yellow:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi" "wlan0"
- ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
;;
zbt-ape522ii)
- ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
- ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
- ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
+ ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
+ ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
+ ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
;;
zbt-cpe102)
- ucidef_set_led_default "power" "power" "$board:green:4g-0" "0"
+ ucidef_set_led_default "power" "power" "$boardname:green:4g-0" "0"
;;
zbt-wa05)
- ucidef_set_led_default "power" "power" "$board:blue:power" "1"
- set_wifi_led "$board:blue:air"
- set_usb_led "$board:blue:usb"
+ ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
+ set_wifi_led "$boardname:blue:air"
+ set_usb_led "$boardname:blue:usb"
;;
zbt-we2026)
- set_wifi_led "$board:green:wlan"
+ set_wifi_led "$boardname:green:wlan"
;;
zbt-we826-16M|\
zbt-we826-32M)
@@ -468,17 +469,17 @@ zbt-we826-32M)
set_usb_led "zbt-we826:green:usb"
;;
zbt-wr8305rt)
- ucidef_set_led_default "power" "power" "$board:green:sys" "1"
- set_usb_led "$board:green:usb"
- set_wifi_led "$board:green:wifi"
+ ucidef_set_led_default "power" "power" "$boardname:green:sys" "1"
+ set_usb_led "$boardname:green:usb"
+ set_wifi_led "$boardname:green:wifi"
;;
zte-q7)
- set_wifi_led "$board:blue:status"
+ set_wifi_led "$boardname:blue:status"
;;
youku-yk1)
- set_wifi_led "$board:blue:air"
- set_usb_led "$board:blue:usb"
- ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10"
+ set_wifi_led "$boardname:blue:air"
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
;;
esac
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e649c7e..570fba2 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -6,12 +6,13 @@
get_status_led() {
board=$(board_name)
+ boardname="${board##*,}"
case $board in
3g150b|\
3g300m|\
w150m)
- status_led="$board:blue:ap"
+ status_led="$boardname:blue:ap"
;;
3g-6200n|\
ar670w|\
@@ -46,10 +47,10 @@ get_status_led() {
x8|\
xdxrn502j|\
wn3000rpv3)
- status_led="$board:green:power"
+ status_led="$boardname:green:power"
;;
3g-6200nl)
- status_led="$board:green:internet"
+ status_led="$boardname:green:internet"
;;
a5-v11|\
cs-qr10|\
@@ -60,11 +61,11 @@ get_status_led() {
mpr-a1|\
mpr-a2|\
mzk-ex750np)
- status_led="$board:red:power"
+ status_led="$boardname:red:power"
;;
ai-br100|\
ht-tm02)
- status_led="$board:blue:wlan"
+ status_led="$boardname:blue:wlan"
;;
all0239-3g|\
dcs-930|\
@@ -88,7 +89,7 @@ get_status_led() {
v11st-fe|\
wmr-300|\
zbt-wg2626)
- status_led="$board:green:status"
+ status_led="$boardname:green:status"
;;
asl26555-8M|\
asl26555-16M)
@@ -97,28 +98,28 @@ get_status_led() {
atp-52b|\
ew1200|\
ip2202)
- status_led="$board:green:run"
+ status_led="$boardname:green:run"
;;
awapn2403|\
dir-645|\
sk-wb8|\
wrh-300cr)
- status_led="$board:green:wps"
+ status_led="$boardname:green:wps"
;;
c108)
- status_led="$board:green:lan"
+ status_led="$boardname:green:lan"
;;
cf-wr800n|\
psg1208)
- status_led="$board:white:wps"
+ status_led="$boardname:white:wps"
;;
psg1218a|\
psg1218b)
- status_led="$board:yellow:status"
+ status_led="$boardname:yellow:status"
;;
cy-swr1100|\
w502u)
- status_led="$board:blue:wps"
+ status_led="$boardname:blue:wps"
;;
c20|\
d240|\
@@ -137,22 +138,22 @@ get_status_led() {
y1|\
y1s|\
youku-yk1)
- status_led="$board:blue:power"
+ status_led="$boardname:blue:power"
;;
db-wrt01|\
esr-9753|\
pbr-d1)
- status_led="$board:orange:power"
+ status_led="$boardname:orange:power"
;;
f5d8235-v1)
- status_led="$board:blue:wired"
+ status_led="$boardname:blue:wired"
;;
f5d8235-v2)
- status_led="$board:blue:router"
+ status_led="$boardname:blue:router"
;;
f7c027|\
timecloud)
- status_led="$board:orange:status"
+ status_led="$boardname:orange:status"
;;
hc5*61|\
hc5661a|\
@@ -160,58 +161,58 @@ get_status_led() {
jhr-n926r|\
mlw221|\
mlwg2)
- status_led="$board:blue:system"
+ status_led="$boardname:blue:system"
;;
hc5962)
- status_led="$board:white:status"
+ status_led="$boardname:white:status"
;;
k2p|\
m3|\
miwifi-nano)
- status_led="$board:blue:status"
+ status_led="$boardname:blue:status"
;;
linkits7688)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
;;
m2m)
- status_led="$board:blue:wifi"
+ status_led="$boardname:blue:wifi"
;;
gl-mt300n-v2)
- status_led="$board:red:wlan"
+ status_led="$boardname:red:wlan"
;;
m4-4M|\
m4-8M)
status_led="m4:blue:status"
;;
mir3g)
- status_led="$board:yellow:status"
+ status_led="$boardname:yellow:status"
;;
miwifi-mini|\
zte-q7)
- status_led="$board:red:status"
+ status_led="$boardname:red:status"
;;
mr-102n)
- status_led="$board:amber:status"
+ status_led="$boardname:amber:status"
;;
mr200)
- status_led="$board:white:power"
+ status_led="$boardname:white:power"
;;
nw718)
- status_led="$board:amber:cpu"
+ status_led="$boardname:amber:cpu"
;;
newifi-d1)
- status_led="$board:blue:status"
+ status_led="$boardname:blue:status"
;;
omega2| \
omega2p)
- status_led="$board:amber:system"
+ status_led="$boardname:amber:system"
;;
oy-0001|\
sl-r7205)
- status_led="$board:green:wifi"
+ status_led="$boardname:green:wifi"
;;
psr-680w)
- status_led="$board:red:wan"
+ status_led="$boardname:red:wan"
;;
px-4885-4M|\
px-4885-8M)
@@ -221,7 +222,7 @@ get_status_led() {
whr-1166d|\
whr-600d|\
widora-neo)
- status_led="$board:orange:wifi"
+ status_led="$boardname:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
@@ -231,13 +232,13 @@ get_status_led() {
ur-326n4g|\
ur-336un|\
wf-2881)
- status_led="$board:green:wps"
+ status_led="$boardname:green:wps"
;;
rb750gr3)
- status_led="$board:blue:pwr"
+ status_led="$boardname:blue:pwr"
;;
sap-g3200u3)
- status_led="$board:green:usb"
+ status_led="$boardname:green:usb"
;;
u25awf-h1)
status_led="u25awf:red:wifi"
@@ -249,43 +250,43 @@ get_status_led() {
status_led="u7628-01:green:power"
;;
v22rw-2x2)
- status_led="$board:green:security"
+ status_led="$boardname:green:security"
;;
vocore-8M|\
vocore-16M)
status_led="vocore:green:status"
;;
vocore2)
- status_led="$board:fuchsia:status"
+ status_led="$boardname:fuchsia:status"
;;
vocore2lite)
- status_led="$board:green:status"
+ status_led="$boardname:green:status"
;;
w306r-v20|\
witi|\
zbt-wr8305rt)
- status_led="$board:green:sys"
+ status_led="$boardname:green:sys"
;;
wcr-1166ds|\
whr-300hp2|\
wsr-1166|\
wsr-600)
- status_led="$board:green:power"
+ status_led="$boardname:green:power"
;;
wcr-150gn|\
wl-351)
- status_led="$board:amber:power"
+ status_led="$boardname:amber:power"
;;
whr-g300n|\
wlr-6000|\
zbt-we2026)
- status_led="$board:red:power"
+ status_led="$boardname:red:power"
;;
wzr-agl300nh)
- status_led="$board:green:router"
+ status_led="$boardname:green:router"
;;
wizfi630a)
- status_led="$board::run"
+ status_led="$boardname::run"
;;
wr512-3gn-4M|\
wr512-3gn-8M)
@@ -301,7 +302,7 @@ get_status_led() {
status_led="wt3020:blue:power"
;;
zbt-cpe102)
- status_led="$board:green:4g-0"
+ status_led="$boardname:green:4g-0"
;;
zbt-we826-16M|\
zbt-we826-32M)
More information about the lede-commits
mailing list