[source] ramips: add support for newifi d2
LEDE Commits
lede-commits at lists.infradead.org
Wed Dec 20 16:06:23 PST 2017
mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/c0e131b4363dde16a1071131b7e762e36099f780
commit c0e131b4363dde16a1071131b7e762e36099f780
Author: Jackson Ming Hu <huming2207 at gmail.com>
AuthorDate: Fri Dec 15 11:51:33 2017 +0800
ramips: add support for newifi d2
Previously Newifi D2 could only use PandoraBox M1's firmware.
It works fine, but LED GPIO is different.
As a result, a separated DTS file for this device should be implemented.
Hardware spec:
* CPU: MTK MT7621A
* RAM: 512MB
* ROM: 32MB SPI Flash
* WiFi: MTK MT7603+MT7612
* Button: 2 buttons (reset, wps)
* LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) &
2 dual-color LEDs (Power, Internet)
* Ethernet: 5 ports, 4 LAN + 1 WAN
Installation method:
Same as Newifi D1, users may need to request unlock code from the device
manufacturer. Otherwise, a SPI flash programmer may be necessary to get
the firmware flashed. After the device is unlocked, press and hold reset
button before power cable plugs in. Then go to http://192.168.1.1 to
upload and flash the firmware package.
Signed-off-by: Jackson Ming Hu <huming2207 at gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 6 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 1 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/Newifi-D2.dts | 159 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 9 ++
6 files changed, 177 insertions(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 671a578..a5c51c7 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -305,6 +305,12 @@ pbr-m1)
ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1"
;;
+d-team,newifi-d2)
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
+ ;;
psg1208)
set_wifi_led "$boardname:white:wlan2g"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 947b0dd..5a64bb7 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -92,6 +92,7 @@ ramips_setup_interfaces()
mt7628|\
mzk-750dhp|\
mzk-w300nh2|\
+ d-team,newifi-d2|\
nixcore-x1-8M|\
nixcore-x1-16M|\
oy-0001|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 1d4b0ef..e7b49a5 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -125,6 +125,7 @@ get_status_led() {
d240|\
dap-1350|\
na930|\
+ d-team,newifi-d2|\
pbr-m1|\
re350-v1|\
rt-ac51u|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d95dcfe..68b47ee 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -107,6 +107,7 @@ platform_check_image() {
nbg-419n|\
nbg-419n2|\
newifi-d1|\
+ d-team,newifi-d2|\
nixcore-x1-8M|\
nixcore-x1-16M|\
nw718|\
diff --git a/target/linux/ramips/dts/Newifi-D2.dts b/target/linux/ramips/dts/Newifi-D2.dts
new file mode 100644
index 0000000..e919338
--- /dev/null
+++ b/target/linux/ramips/dts/Newifi-D2.dts
@@ -0,0 +1,159 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
+ model = "Newifi-D2";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power-amber {
+ label = "newifi-d2:amber:power";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ power-blue {
+ label = "newifi-d2:blue:power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet-amber {
+ label = "newifi-d2:amber:internet";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ internet-blue {
+ label = "newifi-d2:blue:internet";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "newifi-d2:blue:wlan2g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "newifi-d2:blue:wlan5g";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "newifi-d2:blue:usb";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_usb3 {
+ gpio-export,name = "power_usb3";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+ };
+
+ pcie1 {
+ mt76 at 1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uart2", "uart3";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index ca1e366..8ba65a1 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -142,6 +142,15 @@ define Device/newifi-d1
endef
TARGET_DEVICES += newifi-d1
+define Device/d-team_newifi-d2
+ DTS := Newifi-D2
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := Newifi D2
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += d-team_newifi-d2
+
define Device/pbr-m1
DTS := PBR-M1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
More information about the lede-commits
mailing list