[source] ramips: fix polarity in gpio-export node
LEDE Commits
lede-commits at lists.infradead.org
Mon Dec 18 22:24:43 PST 2017
mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/95fe3c51e5e1219fc29ce1776f94c23642e84474
commit 95fe3c51e5e1219fc29ce1776f94c23642e84474
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Sun Dec 17 00:02:06 2017 +0100
ramips: fix polarity in gpio-export node
If we need to set the initial output value to GPIOF_OUT_INIT_HIGH (1) to
enable something, the pin is ACTIVE_HIGH. The same applies to
GPIOF_OUT_INIT_LOW (0) and ACTIVE_LOW.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
target/linux/ramips/dts/ArcherMR200.dts | 2 +-
target/linux/ramips/dts/BR-6475ND.dts | 2 +-
target/linux/ramips/dts/DWR-512-B.dts | 2 +-
target/linux/ramips/dts/GL-MT300N-V2.dts | 2 +-
target/linux/ramips/dts/HC5861.dts | 4 ++--
target/linux/ramips/dts/JHR-N926R.dts | 2 +-
target/linux/ramips/dts/R6220.dts | 2 +-
target/linux/ramips/dts/WIZFI630A.dts | 5 -----
target/linux/ramips/dts/WNDR3700V5.dts | 2 +-
target/linux/ramips/dts/WR6202.dts | 2 +-
target/linux/ramips/dts/X5.dts | 2 +-
11 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/target/linux/ramips/dts/ArcherMR200.dts b/target/linux/ramips/dts/ArcherMR200.dts
index 2736a05..ec28d39 100644
--- a/target/linux/ramips/dts/ArcherMR200.dts
+++ b/target/linux/ramips/dts/ArcherMR200.dts
@@ -92,7 +92,7 @@
power_usb {
gpio-export,name = "power_usb1";
gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/target/linux/ramips/dts/BR-6475ND.dts b/target/linux/ramips/dts/BR-6475ND.dts
index 4e52da0..11611b0 100644
--- a/target/linux/ramips/dts/BR-6475ND.dts
+++ b/target/linux/ramips/dts/BR-6475ND.dts
@@ -103,7 +103,7 @@
usb {
gpio-export,name="usb";
gpio-export,output=<0>;
- gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
};
};
*/
diff --git a/target/linux/ramips/dts/DWR-512-B.dts b/target/linux/ramips/dts/DWR-512-B.dts
index f531df8..afcac21 100644
--- a/target/linux/ramips/dts/DWR-512-B.dts
+++ b/target/linux/ramips/dts/DWR-512-B.dts
@@ -68,7 +68,7 @@
modem3g_enable {
gpio-export,name = "modem3g_enable";
gpio-export,output = <1>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/ramips/dts/GL-MT300N-V2.dts b/target/linux/ramips/dts/GL-MT300N-V2.dts
index e7df340..8db3d4b 100644
--- a/target/linux/ramips/dts/GL-MT300N-V2.dts
+++ b/target/linux/ramips/dts/GL-MT300N-V2.dts
@@ -64,7 +64,7 @@
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/target/linux/ramips/dts/HC5861.dts b/target/linux/ramips/dts/HC5861.dts
index d4f34b3..8773588 100644
--- a/target/linux/ramips/dts/HC5861.dts
+++ b/target/linux/ramips/dts/HC5861.dts
@@ -42,13 +42,13 @@
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <0>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
sdpower {
gpio-export,name = "sdpower";
gpio-export,output = <0>;
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/target/linux/ramips/dts/JHR-N926R.dts b/target/linux/ramips/dts/JHR-N926R.dts
index 93310e1..d1d2627 100644
--- a/target/linux/ramips/dts/JHR-N926R.dts
+++ b/target/linux/ramips/dts/JHR-N926R.dts
@@ -72,7 +72,7 @@
display_data {
gpio-export,name = "display_data";
gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
display_clock {
diff --git a/target/linux/ramips/dts/R6220.dts b/target/linux/ramips/dts/R6220.dts
index 2bbb0db..7d88672 100644
--- a/target/linux/ramips/dts/R6220.dts
+++ b/target/linux/ramips/dts/R6220.dts
@@ -79,7 +79,7 @@
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
index 86ed197..d127536 100644
--- a/target/linux/ramips/dts/WIZFI630A.dts
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -13,11 +13,6 @@
bootargs = "console=ttyS1,115200";
};
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
- };
-
gpio-leds {
compatible = "gpio-leds";
diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts
index c780011..ce96440 100644
--- a/target/linux/ramips/dts/WNDR3700V5.dts
+++ b/target/linux/ramips/dts/WNDR3700V5.dts
@@ -64,7 +64,7 @@
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
index 3cc1b23..2f39818 100644
--- a/target/linux/ramips/dts/WR6202.dts
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -85,7 +85,7 @@
usb {
gpio-export,name = "usb";
gpio-export,output = <0>;
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/target/linux/ramips/dts/X5.dts b/target/linux/ramips/dts/X5.dts
index 8911fa8..20c4237 100644
--- a/target/linux/ramips/dts/X5.dts
+++ b/target/linux/ramips/dts/X5.dts
@@ -66,7 +66,7 @@
usb-mode {
gpio-export,name = "usb-mode";
gpio-export,output = <0>;
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
};
More information about the lede-commits
mailing list