[source] ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1
LEDE Commits
lede-commits at lists.infradead.org
Wed Dec 6 08:52:29 PST 2017
dangole pushed a commit to source.git, branch master:
https://git.lede-project.org/58e0673900ea585b03d3cc2f8917667faa3f977f
commit 58e0673900ea585b03d3cc2f8917667faa3f977f
Author: Zoltan HERPAI <wigyori at uid0.hu>
AuthorDate: Wed Dec 6 15:43:55 2017 +0100
ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1
This is a variant of the MT7620N-based Asus routers.
Specifications:
- MT7620N (580 MHz)
- 32 MB RAM
- 8 MB Flash
- 5x 10/100Mbps Ethernet (built-in switch)
- 2.4 GHz WLAN
- 2x external, non-detachable antennas
- UART (J2) header on PCB (115200 8n1)
Flash instructions:
1. Configure PC with static IP 192.168.1.75/24
2. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds. All 4 LEDs will
start to blink, which is when the router will accept firmware files via TFTP.
No known limitations on firmware filenames, just send it with a TFTP client
to 192.168.1.1.
3. Router will download file from server, write it to flash and reboot.
Signed-off-by: Zoltan HERPAI <wigyori at uid0.hu>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 6 ++
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/RT-N12-PLUS.dts | 117 +++++++++++++++++++++
target/linux/ramips/image/mt7620.mk | 6 ++
6 files changed, 134 insertions(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 74e405e..0c97dc9 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -340,6 +340,12 @@ rt-ac51u)
set_wifi_led "$board:blue:wifi"
set_usb_led "$board:blue:usb" "1-1"
;;
+rt-n12p)
+ ucidef_set_led_default "power" "power" "$board:green:power" "1"
+ ucidef_set_led_netdev "lan" "lan" "$board:green:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
+ set_wifi_led "$board:green:air"
+ ;;
rt-n14u)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 6ad64e6..db797c6 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -100,6 +100,7 @@ ramips_setup_interfaces()
psg1208|\
psg1218a|\
r6220|\
+ rt-n12p)
sap-g3200u3|\
sk-wb8|\
u7621-06-256M-16M|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 76ca3d1..bf19a4c 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -460,6 +460,9 @@ ramips_board_detect() {
*"RT-N10+")
name="rt-n10-plus"
;;
+ *"RT-N12+")
+ name="rt-n12p"
+ ;;
*"RT-N13U")
name="rt-n13u"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0d5b6bb..3181da2 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -130,6 +130,7 @@ platform_check_image() {
rt-ac51u|\
rt-g32-b1|\
rt-n10-plus|\
+ rt-n12p|\
rt-n13u|\
rt-n14u|\
rt-n15|\
diff --git a/target/linux/ramips/dts/RT-N12-PLUS.dts b/target/linux/ramips/dts/RT-N12-PLUS.dts
new file mode 100644
index 0000000..f3e0284
--- /dev/null
+++ b/target/linux/ramips/dts/RT-N12-PLUS.dts
@@ -0,0 +1,117 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
+ model = "Asus RT-N12+";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "rt-n12p:green:wan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "rt-n12p:green:lan";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "rt-n12p:green:power";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ air {
+ label = "rt-n12p:green:air";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 7dd26fe..a55cc82 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -391,6 +391,12 @@ define Device/rp-n53
endef
TARGET_DEVICES += rp-n53
+define Device/rt-n12p
+ DTS := RT-N12-PLUS
+ DEVICE_TITLE := Asus RT-N11P/RT-N12+/RT-N12Eb1
+endef
+TARGET_DEVICES += rt-n12p
+
define Device/rt-n14u
DTS := RT-N14U
DEVICE_TITLE := Asus RT-N14u
More information about the lede-commits
mailing list