[source] bcm53xx: backport BCM5301X patches from 2019-09-30
LEDE Commits
lede-commits at lists.infradead.org
Fri Sep 30 14:39:40 PDT 2016
rmilecki pushed a commit to source.git, branch master:
https://git.lede-project.org/d5dcb1bf97c421fe59925dba8e9197a4b7d67536
commit d5dcb1bf97c421fe59925dba8e9197a4b7d67536
Author: Rafał Miłecki <rafal at milecki.pl>
AuthorDate: Fri Sep 30 15:43:08 2016 +0200
bcm53xx: backport BCM5301X patches from 2019-09-30
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
...X-Add-separated-DTS-include-file-for-BCM4.patch | 70 +++++++++
...ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch | 92 ++++++++++++
...05-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch | 51 +++++++
...06-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch | 93 ++++++++++++
...07-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch | 159 +++++++++++++++++++++
...301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 6 +-
...ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch | 2 +-
...X-Enable-ChipCommon-UART-on-untested-devi.patch | 28 +---
8 files changed, 471 insertions(+), 30 deletions(-)
diff --git a/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch b/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
new file mode 100644
index 0000000..43c4574
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
@@ -0,0 +1,70 @@
+From 345fd105ff676ef672d1e41b31165b47aa040dab Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
+Date: Wed, 21 Sep 2016 22:58:32 +0200
+Subject: [PATCH] ARM: BCM5301X: Add separated DTS include file for BCM47094
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use it to store BCM47094 specific properties/values and avoid repeating
+them in device DTS files.
+
+Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
+ arch/arm/boot/dts/bcm47094.dtsi | 11 +++++++++++
+ 3 files changed, 13 insertions(+), 4 deletions(-)
+ create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -9,7 +9,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm47094.dtsi"
+ #include "bcm5301x-nand-cs0-bch1.dtsi"
+
+ / {
+@@ -107,7 +107,6 @@
+
+ &uart0 {
+ status = "okay";
+- clock-frequency = <125000000>;
+ };
+
+ &usb3 {
+--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+@@ -6,7 +6,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm47094.dtsi"
+ #include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+@@ -100,5 +100,4 @@
+
+ &uart0 {
+ status = "okay";
+- clock-frequency = <125000000>;
+ };
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094.dtsi
+@@ -0,0 +1,11 @@
++/*
++ * Copyright (C) 2016 Rafał Miłecki <rafal at milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++#include "bcm4708.dtsi"
++
++&uart0 {
++ clock-frequency = <125000000>;
++};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch b/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
new file mode 100644
index 0000000..65dc796
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
@@ -0,0 +1,92 @@
+From 3ede027b3dce2fca07350b7587c7c8f44706c94c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
+Date: Wed, 21 Sep 2016 22:58:33 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable UART on Netgear R8000
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It was tested by LEDE users, all we need is to adjust clock frequency.
+While we're at it create a separated DTS include file to share code with
+other BCM4709 devices easier.
+
+Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
+ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +++++-
+ arch/arm/boot/dts/bcm4709.dtsi | 11 +++++++++++
+ 5 files changed, 19 insertions(+), 4 deletions(-)
+ create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -9,7 +9,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm4709.dtsi"
+ #include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -9,7 +9,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm4709.dtsi"
+ #include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -9,7 +9,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm4709.dtsi"
+ #include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -9,7 +9,7 @@
+
+ /dts-v1/;
+
+-#include "bcm4708.dtsi"
++#include "bcm4709.dtsi"
+ #include "bcm5301x-nand-cs0-bch8.dtsi"
+
+ / {
+@@ -107,6 +107,10 @@
+ };
+ };
+
++&uart0 {
++ status = "okay";
++};
++
+ &usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709.dtsi
+@@ -0,0 +1,11 @@
++/*
++ * Copyright (C) 2016 Rafał Miłecki <rafal at milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++#include "bcm4708.dtsi"
++
++&uart0 {
++ clock-frequency = <125000000>;
++};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch b/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
new file mode 100644
index 0000000..73bc90e
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
@@ -0,0 +1,51 @@
+From 5b92db97f4ae345bd6f045c9427471680a7fe2e7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
+Date: Wed, 21 Sep 2016 22:58:34 +0200
+Subject: [PATCH] ARM: BCM5301X: Specify USB 3.0 PHY in DT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Driver for Northstar USB 3.0 PHY has been recently added under the name
+phy-bcm-ns-usb3. Add binding for it into the DT files.
+The only slightly tricky part is BCM47094 which uses different PHY
+version and requires different compatible value.
+
+Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
+ arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
+ 2 files changed, 13 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094.dtsi
++++ b/arch/arm/boot/dts/bcm47094.dtsi
+@@ -6,6 +6,12 @@
+
+ #include "bcm4708.dtsi"
+
++/ {
++ usb3_phy: usb3-phy {
++ compatible = "brcm,ns-bx-usb3-phy";
++ };
++};
++
+ &uart0 {
+ clock-frequency = <125000000>;
+ };
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -149,6 +149,13 @@
+ clock-names = "phy-ref-clk";
+ };
+
++ usb3_phy: usb3-phy {
++ compatible = "brcm,ns-ax-usb3-phy";
++ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
++ reg-names = "dmp", "ccb-mii";
++ #phy-cells = <0>;
++ };
++
+ axi at 18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch b/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
new file mode 100644
index 0000000..3052bd0
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
@@ -0,0 +1,93 @@
+From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab at luxul.com>
+Date: Tue, 27 Sep 2016 11:27:10 -0600
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
+
+Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
+chipsets on PCB connected using PCIe.
+
+Signed-off-by: Dan Haab <dhaab at luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
+ 2 files changed, 65 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
++ bcm4708-luxul-xap-1510.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
+ bcm4708-netgear-r6250.dtb \
+ bcm4708-netgear-r6300-v2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -0,0 +1,64 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
++ model = "Luxul XAP-1510 V1";
++
++ chosen {
++ bootargs = "console=ttyS0,115200 earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ 5ghz {
++ label = "bcm53xx:blue:5ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "none";
++ };
++
++ 2ghz {
++ label = "bcm53xx:blue:2ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "none";
++ };
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&spi_nor {
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
new file mode 100644
index 0000000..3067af8
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
@@ -0,0 +1,159 @@
+From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab at luxul.com>
+Date: Tue, 27 Sep 2016 11:27:11 -0600
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
+
+Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
+4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
+algorithm.
+
+Signed-off-by: Dan Haab <dhaab at luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
+ 3 files changed, 125 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+ create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r8000.dtb \
+ bcm47094-dlink-dir-885l.dtb \
++ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-netgear-r8500.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -0,0 +1,111 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm47094.dtsi"
++#include "bcm5301x-nand-cs0-bch4.dtsi"
++
++/ {
++ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul XWR-3100 V1";
++
++ chosen {
++ bootargs = "console=ttyS0,115200 earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ power {
++ label = "bcm53xx:green:power";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++
++ lan3 {
++ label = "bcm53xx:green:lan1";
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ lan4 {
++ label = "bcm53xx:green:lan0";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ wan {
++ label = "bcm53xx:green:wan";
++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ lan1 {
++ label = "bcm53xx:green:lan3";
++ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ lan2 {
++ label = "bcm53xx:green:lan2";
++ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++
++ 2ghz {
++ label = "bcm53xx:green:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ 5ghz {
++ label = "bcm53xx:green:5ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+@@ -0,0 +1,13 @@
++/*
++ * Copyright 2016 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++#include "bcm5301x-nand-cs0.dtsi"
++
++&nandcs {
++ nand-ecc-algo = "bch";
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++};
diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
index eec68ab..9dcc51d 100644
--- a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
@@ -9,14 +9,14 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r7900.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
- bcm47094-netgear-r8500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
@@ -0,0 +1,41 @@
@@ -31,7 +31,7 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
+
+/dts-v1/;
+
-+#include "bcm4708.dtsi"
++#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
diff --git a/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
index ff02cd7..00840cd 100644
--- a/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
+++ b/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
@@ -13,9 +13,9 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,48 @@
diff --git a/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
index 19b2484..3b4fab7 100644
--- a/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
+++ b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
@@ -70,47 +70,23 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
+};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -65,3 +65,8 @@
+@@ -65,3 +65,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
-+ clock-frequency = <125000000>;
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -128,6 +128,10 @@
+@@ -128,6 +128,9 @@
};
};
+&uart0 {
+ status = "okay";
-+ clock-frequency = <125000000>;
+};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -108,6 +108,11 @@
- };
- };
-
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -104,4 +104,5 @@
-
- &uart0 {
- status = "okay";
-+ clock-frequency = <125000000>;
- };
More information about the lede-commits
mailing list