[source] lantiq: board.d: cleanup default switch config

[LEDE Commits]

mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/96f6bd501a3b57813e698ad2b531f115f710c75e

commit 96f6bd501a3b57813e698ad2b531f115f710c75e
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Tue Aug 23 07:36:00 2016 +0200

    lantiq: board.d: cleanup default switch config
    
    Add or fix the physical port number of switch ports to allow LuCI to
    display the ports in physical order.
    
    Remove the physical port number in case bridge port and physical port
    order are the same.
    
    Reorder the ucidef_add_switch parameter to be aligned with the switch
    port number.
    
    Remove board settings which are covered by the default case and remove
    comments.
    
    Signed-off-by: Mathias Kresin <dev at kresin.me>
---
 .../linux/lantiq/base-files/etc/board.d/02_network | 51 ++++++++--------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 1bdd57a..3f61326 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -21,101 +21,88 @@ interface_wan=""
 board=$(lantiq_board_name)
 
 case "$board" in
-# adm6996
 ARV4510PW)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t at eth0"
+		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t at eth0"
 	;;
 
 ARV4520PW)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t at eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t at eth0"
 	;;
 
 ACMP252|GIGASX76X)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t at eth0"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t at eth0"
 	;;
 
-# ar8316
 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
 	ucidef_add_switch "switch0" \
-		"0t at eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+		"0t at eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-# rtl8306g
 ARV7506PW11)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t at eth0"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t at eth0"
 	;;
 
-# rtl8306g
 ARV7519PW)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t at eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t at eth0"
 	;;
 
 WBMR)
 	ucidef_add_switch "switch0" \
-		"0t at eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+		"0t at eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-VG3503J)
-	ucidef_set_interface_lan 'eth0'
-	;;
-
-ARV4518PWR01*)
-        ucidef_set_interface_lan 'eth0'
-        ;;
-
 DGN3500*)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t at eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t at eth0"
 	;;
 
 FRITZ7360SL)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t at eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t at eth0"
 	;;
 
 H201L)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t at eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t at eth0"
 	;;
 
-#rtl8306g
 P2601HNFX)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t at eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "5t at eth0"
 	;;
 
 P2812HNUF*)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t at eth0"
+		"0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t at eth0"
 	;;
 
 TDW8970|TDW8980)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t at eth0"
+		"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t at eth0"
 	;;
 
 VR200v)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t at eth0"
+		"0:lan" "2:lan" "4:lan" "5:lan" "6t at eth0"
 	;;
 
 ARV7519RW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t at eth0"
+		"0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t at eth0"
 	;;
 
 BTHOMEHUBV2B)
@@ -134,19 +121,19 @@ BTHOMEHUBV3A)
 BTHOMEHUBV5A)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t at eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t at eth0"
 	;;
 
 VGV7519)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t at eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t at eth0"
 	;;
 
 VGV7510KW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t at eth0"
+		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t at eth0"
 	;;
 
 WBMR300)
@@ -160,7 +147,7 @@ EASY80920NAND|EASY80920NOR)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t at eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t at eth0"
 	;;
 
 *)