[source] ramips: remove old build code seama recipe

[LEDE Commits]

mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/9f531efc599d8ea3de99d9e35d02b4c9f6a13ebc

commit 9f531efc599d8ea3de99d9e35d02b4c9f6a13ebc
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Sat Sep 3 15:27:46 2016 +0200

    ramips: remove old build code seama recipe
    
    Now that all seama images are using the new build code this seama recipe
    used with the old build code can be dropped.
    
    Signed-off-by: Mathias Kresin <dev at kresin.me>
---
 target/linux/ramips/image/Makefile | 32 --------------------------------
 1 file changed, 32 deletions(-)

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 39da5e0..7794d48 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -210,38 +210,6 @@ define BuildFirmware/DefaultDualSize/initramfs
 	$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
 endef
 
-# build Seama header images
-define BuildFirmware/Seama/squashfs
-	$(call MkImageLzmaDtb,$(2),$(3),$(5))
-	$(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin)
-	cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
-	if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $(5) ]; then \
-		echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
-	else \
-		dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
-		( \
-			dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
-			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-		) > $(KDIR)/vmlinux-$(2).tmp; \
-		$(STAGING_DIR_HOST)/bin/seama \
-			-i $(KDIR)/vmlinux-$(2).tmp \
-			-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
-		$(STAGING_DIR_HOST)/bin/seama \
-			-s $(call imgname,$(1),$(2))-factory.bin \
-			-m "signature=$(4)" \
-			-i $(KDIR)/vmlinux-$(2).tmp.seama; \
-		dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \
-		$(STAGING_DIR_HOST)/bin/seama \
-			-i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \
-			-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
-		( \
-			dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \
-			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-		) > $(BIN_DIR)/$(output_name); \
-	fi
-endef
-BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
-
 define BuildFirmware/PorayDualSize/squashfs
 	$(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3))
 	if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \