[source] oxnas: kd20: generate image compatible with stock firmware

[LEDE Commits]

dangole pushed a commit to source.git, branch master:
https://git.lede-project.org/c773a2c46e043b8426a023d355aa74b538f4a9b4

commit c773a2c46e043b8426a023d355aa74b538f4a9b4
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sun Sep 4 03:11:45 2016 +0200

    oxnas: kd20: generate image compatible with stock firmware
    
     * adjust MTD partitions to match vendor's scheme
     * generate *factory.tar.gz image compatible with stock web-if
       firmware upgrade interface
    
    Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 .../oxnas/files/arch/arm/boot/dts/ox820-kd20.dts   | 26 +++++++++++++++++----
 target/linux/oxnas/image/Makefile                  | 27 +++++++++++++++++++++-
 2 files changed, 47 insertions(+), 6 deletions(-)

diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
index 217d812..b5c79de 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
@@ -13,7 +13,7 @@
 	model = "Shuttle KD20";
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
+		bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=256M";
 	};
 
 	pcie-controller at 47C00000 {
@@ -33,14 +33,30 @@
 		status = "okay";
 
 		partition at 0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			/*read-only;*/
+			label = "stage1";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+
+		partition at 40000 {
+			label = "u-boot";
+			reg = <0x00040000 0x00200000>;
+			read-only;
+		};
+
+		partition at 240000 {
+			label = "initrd";
+			reg = <0x00240000 0x00600000>;
+		};
+
+		partition at 840000 {
+			label = "kernel";
+			reg = <0x00840000 0x007C0000>;
 		};
 
 		partition at e00000 {
 			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
+			reg = <0x01000000 0x07000000>;
 		};
 	};
 
diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile
index 097d894..a9fb139 100644
--- a/target/linux/oxnas/image/Makefile
+++ b/target/linux/oxnas/image/Makefile
@@ -48,11 +48,36 @@ define Device/akitio
 endef
 TARGET_DEVICES += akitio
 
+define Build/omninas-factory
+	rm -rf $@.tmp $@.dummy $@.dummy.gz
+	mkdir -p $@.tmp
+	$(CP) $@ $@.tmp/uImage
+	dd if=/dev/zero bs=64k count=4 of=$@.dummy
+	gzip $@.dummy
+	mkimage -A arm -T ramdisk -C gzip -n "dummy" \
+		-d $@.dummy.gz \
+		$@.tmp/rdimg.gz
+	echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version
+	chmod 0744 $@.tmp/*
+	$(TAR) -C $@.tmp -czvf $@ .
+endef
+
+define Build/encrypt-3des
+	openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@
+endef
+
 define Device/kd20
-  DTS := kd20
+  DEVICE_DTS := ox820-kd20
   DEVICE_TITLE := Shuttle KD20
+  KERNEL := kernel-bin | append-dtb | uImage none
+  KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory
+  KERNEL_INITRAMFS_SUFFIX := .tar.gz
+  KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | encrypt-3des sohmuntitnlaes
+  KERNEL_IMAGE := zImage
   DEVICE_PACKAGES := kmod-usb3 kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper \
                      kmod-hwmon-core kmod-hwmon-gpiofan
+  KERNEL_IN_UBI := 
+  UBOOTENV_IN_UBI := 
 endef
 TARGET_DEVICES += kd20