[source] ar71xx: Add support to Powerline ac TP-Link WPA8630
LEDE Commits
lede-commits at lists.infradead.org
Mon Oct 31 11:13:15 PDT 2016
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/8cc0c34ef550ac2f842fe6811d32ac01af69d19f
commit 8cc0c34ef550ac2f842fe6811d32ac01af69d19f
Author: Henryk Heisig <hyniu at o2.pl>
AuthorDate: Sun Oct 30 17:57:27 2016 +0100
ar71xx: Add support to Powerline ac TP-Link WPA8630
Signed-off-by: Henryk Heisig <hyniu at o2.pl>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 4 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 3 +-
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-wpa8630.c | 164 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/tp-link.mk | 12 ++
12 files changed, 210 insertions(+), 2 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index a32ca91..01308b5 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -638,6 +638,11 @@ wnr612-v2)
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
+wpa8630)
+ ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
+ ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ;;
wpn824n)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index ab7404d..e6489af 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -398,6 +398,10 @@ ar71xx_setup_interfaces()
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
+ wpa8630)
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+ ;;
wpj344)
ucidef_add_switch "switch0" \
"0 at eth0" "3:lan" "2:wan"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 475cb80..8b038e4 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -43,7 +43,8 @@ get_status_led() {
ap83|\
mr12|\
mr16|\
- nbg6616)
+ nbg6616|\
+ wpa8630)
status_led="$board:green:power"
;;
ap96)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5a48b06..c95cfb9 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -90,6 +90,10 @@ case "$FIRMWARE" in
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
+ wpa8630)
+ ath10kcal_extract "ART" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index f51d7db..d7c4131 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1129,6 +1129,9 @@ ar71xx_board_detect() {
*"WNR1000 V2")
name="wnr1000-v2"
;;
+ *WPA8630)
+ name="wpa8630"
+ ;;
*WPN824N)
name="wpn824n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 9c0f3f3..3c7976d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -386,7 +386,8 @@ platform_check_image() {
tl-wr842n-v3|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
- tl-wr941nd)
+ tl-wr941nd|\
+ wpa8630)
local magic_ver="0100"
case "$board" in
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 4e3f5a4..64c3604 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -194,6 +194,7 @@ CONFIG_ATH79_MACH_WNR2000_V3=y
CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPA8630=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ342=y
CONFIG_ATH79_MACH_WPJ344=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 86df292..60f6d9a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1707,3 +1707,14 @@ config ATH79_MACH_DAP_2695_A1
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+
+config ATH79_MACH_WPA8630
+ bool "TP-Link WPA8630 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 4b927bc..cbfd7a4 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -200,6 +200,7 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
new file mode 100644
index 0000000..d86adaf
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
@@ -0,0 +1,164 @@
+/*
+ * TP-Link WPA8630 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu at o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+
+#define WPA8630_KEYS_POLL_INTERVAL 20
+#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
+
+#define WPA8630_GPIO_LED_POWER 1
+#define WPA8630_GPIO_LED_LAN 5
+#define WPA8630_GPIO_LED_WLAN 19
+#define WPA8630_GPIO_LED_WLAN5 21
+
+#define WPA8630_GPIO_BTN_RESET 2
+#define WPA8630_GPIO_BTN_RFKILL 8
+#define WPA8630_GPIO_BTN_0 6
+#define WPA8630_GPIO_BTN_1 7
+
+#define WPA8630_MAC0_OFFSET 0x0000
+#define WPA8630_WMAC_CALDATA_OFFSET 0x1000
+#define WPA8630_PCI_CALDATA_OFFSET 0x5000
+
+static struct flash_platform_data wpa8630_flash_data = {
+ .type = "s25fl064k",
+};
+
+static struct gpio_led wpa8630_leds_gpio[] __initdata = {
+ {
+ .name = "wpa8630:green:power",
+ .gpio = WPA8630_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "wpa8630:green:lan",
+ .gpio = WPA8630_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "wpa8630:green:wlan",
+ .gpio = WPA8630_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "wpa8630:green:wlan5",
+ .gpio = WPA8630_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPA8630_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPA8630_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "LED",
+ .type = EV_KEY,
+ .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPA8630_GPIO_BTN_0,
+ .active_low = 1,
+ },
+ {
+ .desc = "Pair",
+ .type = EV_KEY,
+ .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPA8630_GPIO_BTN_1,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
+static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data wpa8630_qca8337_data = {
+ .pad0_cfg = &wpa8630_qca8337_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info wpa8630_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wpa8630_qca8337_data,
+ },
+};
+
+static void __init wpa8630_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&wpa8630_flash_data);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + WPA8630_MAC0_OFFSET, 0);
+
+ platform_device_register(&ath79_mdio0_device);
+
+ mdiobus_register_board_info(wpa8630_mdio0_info,
+ ARRAY_SIZE(wpa8630_mdio0_info));
+
+ /* GMAC0 is connected to an AR8337 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_mask = ~BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
+
+ ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
+ wpa8630_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpa8630_gpio_keys),
+ wpa8630_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
+ wpa8630_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 1243409..d252a2b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -258,6 +258,7 @@ enum ath79_mach_type {
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPA8630, /* TP-Link WPA8630 */
ATH79_MACH_WPE72, /* Compex WPE72 */
ATH79_MACH_WPJ342, /* Compex WPJ342 */
ATH79_MACH_WPJ344, /* Compex WPJ344 */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 58ea1f3..b494411 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -913,3 +913,15 @@ define Device/tl-wa7210n-v2
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
+
+define Device/wpa8630
+ $(Device/tplink-8mlzma)
+ DEVICE_TITLE := TP-LINK WPA8630
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := WPA8630
+ DEVICE_PROFILE := WPA8630
+ TPLINK_HWID := 0x86300001
+ MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k at 0x10000(firmware)
+ IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
+endef
+TARGET_DEVICES += wpa8630
More information about the lede-commits
mailing list