[source] qmi: add metric, defaultroute and peerdns options for qmi protocol

[LEDE Commits]

blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/85fbffd74b806e4fce6d78145a8a33b2e0d2872c

commit 85fbffd74b806e4fce6d78145a8a33b2e0d2872c
Author: Marcin Jurkowski <marcin1j at gmail.com>
AuthorDate: Mon Oct 17 02:42:47 2016 +0200

    qmi: add metric, defaultroute and peerdns options for qmi protocol
    
    Adds generic network options for qmi protocol dynamic interfaces
    as suggested by Felix in
    https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.
    
    IPv6-related code taken from Bruno's patch https://patchwork.ozlabs.org/patch/584816.
    
    This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.
    
    Signed-off-by: Marcin Jurkowski <marcin1j at gmail.com>
    Signed-off-by: Bruno Randolf <br1 at einfach.org>
---
 .../network/utils/uqmi/files/lib/netifd/proto/qmi.sh   | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 53bf7a3..1235698 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -19,16 +19,16 @@ proto_qmi_init_config() {
 	proto_config_add_string modes
 	proto_config_add_boolean ipv6
 	proto_config_add_boolean dhcp
-	proto_config_add_int metric
+	proto_config_add_defaults
 }
 
 proto_qmi_setup() {
 	local interface="$1"
 
-	local device apn auth username password pincode delay modes ipv6 dhcp metric
+	local device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS
 	local cid_4 pdh_4 cid_6 pdh_6 ipv4
 	local ip subnet gateway dns1 dns2 ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-	json_get_vars device apn auth username password pincode delay modes ipv6 dhcp metric
+	json_get_vars device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS
 
 	ipv4=1
 
@@ -172,9 +172,11 @@ proto_qmi_setup() {
 			proto_add_ipv6_address "$ip_6" "128"
 			proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
 			proto_add_ipv6_route "$gateway_6" "128"
-			proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
-			proto_add_dns_server "$dns1_6"
-			proto_add_dns_server "$dns2_6"
+			[ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
+			[ "$peerdns" = 0 ] || {
+				proto_add_dns_server "$dns1_6"
+				proto_add_dns_server "$dns2_6"
+			}
 			proto_add_data
 			json_add_string "cid_6" "$cid_6"
 			json_add_string "pdh_6" "$pdh_6"
@@ -183,7 +185,7 @@ proto_qmi_setup() {
 			json_add_string name "${interface}_6"
 			json_add_string ifname "@$interface"
 			json_add_string proto "dhcpv6"
-			json_add_int metric "$metric"
+			proto_add_dynamic_defaults
 			# RFC 7278: Extend an IPv6 /64 Prefix to LAN
 			json_add_string extendprefix 1
 			json_close_object
@@ -199,7 +201,7 @@ proto_qmi_setup() {
 		json_add_string name "${interface}_4"
 		json_add_string ifname "@$interface"
 		json_add_string proto "dhcp"
-		json_add_int metric "$metric"
+		proto_add_dynamic_defaults
 		json_close_object
 		ubus call network add_dynamic "$(json_dump)"
 	}