[source] mvebu: add support for the Linksys WRT3200ACM (Rango)
LEDE Commits
lede-commits at lists.infradead.org
Sun Oct 23 23:45:44 PDT 2016
nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/3764caa93478e3472df3128b79b6d0f6b0fb999c
commit 3764caa93478e3472df3128b79b6d0f6b0fb999c
Author: Imre Kaloz <kaloz at openwrt.org>
AuthorDate: Thu Oct 13 12:52:20 2016 +0200
mvebu: add support for the Linksys WRT3200ACM (Rango)
Signed-off-by: Imre Kaloz <kaloz at openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
package/boot/uboot-envtools/files/mvebu | 6 +-
target/linux/mvebu/base-files/etc/board.d/01_leds | 8 +-
.../linux/mvebu/base-files/etc/board.d/02_network | 4 +-
target/linux/mvebu/base-files/etc/diag.sh | 3 +
.../mvebu/base-files/etc/init.d/linksys_recovery | 5 +-
target/linux/mvebu/base-files/lib/mvebu.sh | 4 +
.../mvebu/base-files/lib/preinit/06_set_iface_mac | 3 +-
.../mvebu/base-files/lib/preinit/81_linksys_syscfg | 14 +-
.../linux/mvebu/base-files/lib/upgrade/platform.sh | 7 +-
.../arch/arm/boot/dts/armada-385-linksys-rango.dts | 446 +++++++++++++++++++++
target/linux/mvebu/image/Makefile | 10 +-
.../mvebu/patches-4.4/010-build_new_dtbs.patch | 3 +-
12 files changed, 496 insertions(+), 17 deletions(-)
diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu
index 2362bc3..9b826da 100644
--- a/package/boot/uboot-envtools/files/mvebu
+++ b/package/boot/uboot-envtools/files/mvebu
@@ -1,6 +1,7 @@
#!/bin/sh
#
-# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
[ -e /etc/config/ubootenv ] && exit 0
@@ -17,6 +18,9 @@ case "$board" in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x40000"
;;
+armada-385-linksys-rango)
+ ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+ ;;
armada-xp-linksys-mamba)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
;;
diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index 71dd347..8310160 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -1,6 +1,7 @@
#!/bin/sh
#
-# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
. /lib/functions/uci-defaults.sh
@@ -21,6 +22,11 @@ armada-385-linksys-cobra)
ucidef_set_led_usbdev "usb2" "USB2" "pca963x:cobra:white:usb2" "1-1"
ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "2-1"
;;
+armada-385-linksys-rango)
+ ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth0"
+ ucidef_set_led_usbdev "usb2" "USB2" "pca963x:rango:white:usb2" "1-1"
+ ucidef_set_led_usbdev "usb3" "USB3" "pca963x:rango:white:usb3_1" "2-1"
+ ;;
armada-385-linksys-shelby)
ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth0"
ucidef_set_led_usbdev "usb2" "USB2" "pca963x:shelby:white:usb2" "1-1"
diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 21c6660..614a0e2 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -1,6 +1,7 @@
#!/bin/sh
#
-# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
. /lib/functions/uci-defaults.sh
@@ -13,6 +14,7 @@ board=$(mvebu_board_name)
case "$board" in
armada-385-linksys-caiman|\
armada-385-linksys-cobra|\
+armada-385-linksys-rango|\
armada-385-linksys-shelby)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh
index a361fa7..622c7d9 100644
--- a/target/linux/mvebu/base-files/etc/diag.sh
+++ b/target/linux/mvebu/base-files/etc/diag.sh
@@ -13,6 +13,9 @@ get_status_led() {
armada-385-linksys-cobra)
status_led="cobra:white:power"
;;
+ armada-385-linksys-rango)
+ status_led="rango:white:power"
+ ;;
armada-385-linksys-shelby)
status_led="shelby:white:power"
;;
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index d9cae7b..8eeb5f9 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -1,5 +1,6 @@
#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
+# Copyright (C) 2015-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
START=97
boot() {
@@ -7,7 +8,7 @@ boot() {
. /lib/mvebu.sh
case $(mvebu_board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
index 836717d..9a4c53e 100755
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ b/target/linux/mvebu/base-files/lib/mvebu.sh
@@ -1,6 +1,7 @@
#!/bin/sh
#
# Copyright (C) 2013-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
MVEBU_BOARD_NAME=
@@ -43,6 +44,9 @@ mvebu_board_detect() {
*"Linksys WRT1900ACS")
name="armada-385-linksys-shelby"
;;
+ *"Linksys WRT3200ACM")
+ name="armada-385-linksys-rango"
+ ;;
*"Marvell Armada 385 Access Point Development Board")
name="armada-385-db-ap"
;;
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 876c08b..3e870e8 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -1,5 +1,6 @@
#
# Copyright (C) 2014-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
preinit_set_mac_address() {
@@ -14,7 +15,7 @@ preinit_set_mac_address() {
ifconfig eth0 hw ether $mac 2>/dev/null
ifconfig eth1 hw ether $mac 2>/dev/null
;;
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby)
mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
mac_wan=$(macaddr_setbit_la "$mac")
ifconfig eth1 hw ether $mac 2>/dev/null
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index a54226f..3edd82e 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -1,5 +1,6 @@
#
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
preinit_mount_syscfg() {
@@ -8,15 +9,16 @@ preinit_mount_syscfg() {
. /lib/mvebu.sh
case $(mvebu_board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
needs_recovery=0
- ubiattach -m 8 || needs_recovery=1
+ syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
+ ubiattach -m $syscfg_part || needs_recovery=1
if [ $needs_recovery -eq 1 ]
then
echo "ubifs syscfg partition is damaged, reformatting"
- ubidetach -m 8
- ubiformat -y -O 2048 -q /dev/mtd8
- ubiattach -m 8
+ ubidetach -m $syscfg_part
+ ubiformat -y -O 2048 -q /dev/mtd$syscfg_part
+ ubiattach -m $syscfg_part
ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize
fi
mkdir /tmp/syscfg
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 5652e98..a8ad602 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -1,5 +1,6 @@
#
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-Project.org
#
. /lib/mvebu.sh
@@ -13,7 +14,7 @@ platform_check_image() {
[ "$#" -gt 1 ] && return 1
case "$board" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
[ "$magic_long" != "27051956" -a "$magic_long" != "73797375" ] && {
echo "Invalid image type."
return 1
@@ -34,7 +35,7 @@ platform_do_upgrade() {
local board=$(mvebu_board_name)
case "$board" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
platform_do_upgrade_linksys "$ARGV"
;;
armada-388-clearfog)
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
new file mode 100644
index 0000000..0046125
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -0,0 +1,446 @@
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz at openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Linksys WRT3200ACM";
+ compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+
+ spi at 10600 {
+ status = "disabled";
+ };
+
+ i2c at 11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ tmp421 at 4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+
+ pca9635 at 68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9635";
+ reg = <0x68>;
+
+ wan_amber at 0 {
+ label = "rango:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white at 1 {
+ label = "rango:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g at 2 {
+ label = "rango:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g at 3 {
+ label = "rango:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2 at 5 {
+ label = "rango:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1 at 6 {
+ label = "rango:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2 at 7 {
+ label = "rango:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white at 8 {
+ label = "rango:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber at 9 {
+ label = "rango:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+
+ /* J10: VCC, NC, RX, NC, TX, GND */
+ serial at 12000 {
+ status = "okay";
+ };
+
+ ethernet at 70000 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet at 34000 {
+ status = "okay";
+ phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mdio {
+ status = "okay";
+ };
+
+ bm at c8000 {
+ status = "okay";
+ };
+
+ sata at a8000 {
+ status = "okay";
+ };
+
+ sdhci at d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ no-1-8-v;
+ broken-cd;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
+
+ /* USB part of the eSATA/USB 2.0 port */
+ usb at 58000 {
+ status = "okay";
+ };
+
+ usb3 at f8000 {
+ status = "okay";
+ usb-phy = <&usb3_phy>;
+ };
+
+ flash at d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MB */
+ read-only;
+ };
+
+ partition at 200000 {
+ label = "u_env";
+ reg = <0x200000 0x20000>; /* 128KB */
+ };
+
+ partition at 220000 {
+ label = "s_env";
+ reg = <0x220000 0x40000>; /* 256KB */
+ };
+
+ partition at 7e0000 {
+ label = "devinfo";
+ reg = <0x7e0000 0x40000>; /* 256KB */
+ read-only;
+ };
+
+ partition at 820000 {
+ label = "sysdiag";
+ reg = <0x820000 0x1e0000>; /* 1920KB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition at a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x5000000>; /* 80MB */
+ };
+
+ partition at 1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x4a00000>; /* 74MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition at 5a00000 {
+ label = "kernel2";
+ reg = <0x5a00000 0x5000000>; /* 80MB */
+ };
+
+ partition at 6000000 {
+ label = "rootfs2";
+ reg = <0x6000000 0x4a00000>; /* 74MB */
+ };
+
+ /*
+ * 86MB, last MB is for the BBT, not writable
+ */
+ partition at aa00000 {
+ label = "syscfg";
+ reg = <0xaa00000 0x5600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition at 180000 {
+ label = "unused_area";
+ reg = <0x260000 0x5c0000>; /* 5.75MB */
+ };
+ };
+ };
+
+ bm-bppi {
+ status = "okay";
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ /* Marvell 88W8964, 5GHz-only */
+ status = "okay";
+
+ mwlwifi {
+ marvell,2ghz = <0>;
+ marvell,chainmask = <4 4>;
+ };
+
+ };
+
+ pcie at 2,0 {
+ /* Marvell 88W8964, 2GHz-only */
+ status = "okay";
+
+ mwlwifi {
+ marvell,5ghz = <0>;
+ marvell,chainmask = <4 4>;
+ };
+
+ };
+ };
+ };
+
+ usb3_phy: usb3_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_xhci0_vbus>;
+ };
+
+ reg_xhci0_vbus: xhci0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&xhci0_vbus_pins>;
+ regulator-name = "xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&keys_pin>;
+ pinctrl-names = "default";
+
+ button at 1 {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button at 2 {
+ label = "Factory Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&power_led_pin &sata_led_pin>;
+ pinctrl-names = "default";
+
+ power {
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ sata {
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ dsa at 0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð2>;
+ dsa,mii-bus = <&mdio>;
+
+ switch at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port at 0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "rango:white:power";
+ };
+
+ sata {
+ label = "rango:white:sata";
+ };
+ };
+
+ mvsw61xx {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,88e6352";
+ status = "okay";
+ reg = <0x10>;
+
+ mii-bus = <&mdio>;
+ cpu-port-0 = <5>;
+ cpu-port-1 = <6>;
+ };
+
+};
+
+&pinctrl {
+ keys_pin: keys-pin {
+ marvell,pins = "mpp24", "mpp29";
+ marvell,function = "gpio";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ sata_led_pin: sata-led-pin {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ xhci0_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+};
diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile
index b0cc164..73c533a 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -1,5 +1,6 @@
#
-# Copyright (C) 2012-2015 OpenWrt.org
+# Copyright (C) 2012-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-project.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@@ -119,6 +120,13 @@ define Device/linksys-wrt1900acv2
endef
TARGET_DEVICES += linksys-wrt1900acv2
+define Device/linksys-wrt3200acm
+ $(call Device/linksys,WRT3200ACM (Rango))
+ $(Device/armada-385-linksys)
+ DEVICE_DTS := armada-385-linksys-rango
+endef
+TARGET_DEVICES += linksys-wrt3200acm
+
define Device/linksys-wrt1900acs
$(call Device/linksys,WRT1900ACS (Shelby))
$(Device/armada-385-linksys)
diff --git a/target/linux/mvebu/patches-4.4/010-build_new_dtbs.patch b/target/linux/mvebu/patches-4.4/010-build_new_dtbs.patch
index 334cbec..6ba9ee6 100644
--- a/target/linux/mvebu/patches-4.4/010-build_new_dtbs.patch
+++ b/target/linux/mvebu/patches-4.4/010-build_new_dtbs.patch
@@ -1,9 +1,10 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -748,6 +748,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
+@@ -748,6 +748,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
++ armada-385-linksys-rango.dtb \
+ armada-385-linksys-shelby.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
More information about the lede-commits
mailing list