[source] ltq-ptm: Support 1508-byte MTU for RFC4638
LEDE Commits
lede-commits at lists.infradead.org
Sat Oct 15 02:37:29 PDT 2016
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/8a2a20e71e2909f84dab47e51dfda9e292a6c1ae
commit 8a2a20e71e2909f84dab47e51dfda9e292a6c1ae
Author: David Woodhouse <dwmw2 at infradead.org>
AuthorDate: Fri Oct 7 15:02:13 2016 +0100
ltq-ptm: Support 1508-byte MTU for RFC4638
Tested with VDSL on TP-Link WD8970, I see full 1500-byte PPP data
frames, which end up being 1526 byte Ethernet frames (including
Ethernet+VLAN headers) on the wire.
Fixes: FS#210
Signed-off-by: David Woodhouse <dwmw2 at infradead.org>
---
package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c | 12 +++++++++++-
package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c | 12 +++++++++++-
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c b/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c
index dc75b12..b096b0a 100644
--- a/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c
+++ b/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c
@@ -128,6 +128,7 @@ static int ptm_stop(struct net_device *);
static unsigned int ptm_poll(int, unsigned int);
static int ptm_napi_poll(struct napi_struct *, int);
static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
+static int ptm_change_mtu(struct net_device *, int);
static int ptm_ioctl(struct net_device *, struct ifreq *, int);
static void ptm_tx_timeout(struct net_device *);
@@ -246,7 +247,7 @@ static struct net_device_ops g_ptm_netdev_ops = {
.ndo_start_xmit = ptm_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
+ .ndo_change_mtu = ptm_change_mtu,
.ndo_do_ioctl = ptm_ioctl,
.ndo_tx_timeout = ptm_tx_timeout,
};
@@ -451,6 +452,15 @@ PTM_HARD_START_XMIT_FAIL:
return NETDEV_TX_OK;
}
+static int ptm_change_mtu(struct net_device *dev, int mtu)
+{
+ /* Allow up to 1508 bytes, for RFC4638 */
+ if (mtu < 68 || mtu > ETH_DATA_LEN + 8)
+ return -EINVAL;
+ dev->mtu = mtu;
+ return 0;
+}
+
static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
int ndev;
diff --git a/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c b/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c
index 41464e6..bc27c27 100644
--- a/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c
+++ b/package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c
@@ -74,6 +74,7 @@ static int ptm_stop(struct net_device *);
static unsigned int ptm_poll(int, unsigned int);
static int ptm_napi_poll(struct napi_struct *, int);
static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
+static int ptm_change_mtu(struct net_device *, int);
static int ptm_ioctl(struct net_device *, struct ifreq *, int);
static void ptm_tx_timeout(struct net_device *);
@@ -114,7 +115,7 @@ static struct net_device_ops g_ptm_netdev_ops = {
.ndo_start_xmit = ptm_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
+ .ndo_change_mtu = ptm_change_mtu,
.ndo_do_ioctl = ptm_ioctl,
.ndo_tx_timeout = ptm_tx_timeout,
};
@@ -358,6 +359,15 @@ PTM_HARD_START_XMIT_FAIL:
return 0;
}
+static int ptm_change_mtu(struct net_device *dev, int mtu)
+{
+ /* Allow up to 1508 bytes, for RFC4638 */
+ if (mtu < 68 || mtu > ETH_DATA_LEN + 8)
+ return -EINVAL;
+ dev->mtu = mtu;
+ return 0;
+}
+
static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
ASSERT(dev == g_net_dev[0], "incorrect device");
More information about the lede-commits
mailing list