[source] ar71xx: base-files: rework etc/board.d/02_network

LEDE Commits lede-commits at lists.infradead.org
Tue Oct 4 02:51:11 PDT 2016


blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/4fa90c49c1aa076afd413181953924fb5b245cd9

commit 4fa90c49c1aa076afd413181953924fb5b245cd9
Author: Piotr Dymacz <pepe2k at gmail.com>
AuthorDate: Tue Sep 27 23:41:12 2016 +0200

    ar71xx: base-files: rework etc/board.d/02_network
    
    Convert etc/board.d/02_network in ar71xx target to the same shape
    as we have in ramips target. Split code into two new functions:
    
    - interface/s setup in ar71xx_setup_interfaces()
    - MAC/s setup in ar71xx_setup_macs()
    
    Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
 .../linux/ar71xx/base-files/etc/board.d/02_network | 1087 ++++++++++----------
 1 file changed, 554 insertions(+), 533 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 2a50c9d..7c3ab13 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -7,548 +7,569 @@
 . /lib/functions/uci-defaults.sh
 . /lib/ar71xx.sh
 
-board_config_update
+ar71xx_setup_interfaces()
+{
+	local board="$1"
 
-board=$(ar71xx_board_name)
+	case "$board" in
+	all0315n |\
+	all0258n |\
+	dr344 |\
+	ja76pf2|\
+	rocket-m-ti |\
+	ubnt-unifi-outdoor)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+
+	ap132 |\
+	ap152 |\
+	wlr8100)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+		;;
+
+	esr1750 |\
+	epg5000)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
 
+	cr5000)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
 
-case "$board" in
-all0315n |\
-all0258n |\
-dr344 |\
-ja76pf2|\
-rocket-m-ti |\
-ubnt-unifi-outdoor)
-	ucidef_set_interface_lan "eth0 eth1"
-	;;
-
-ap132 |\
-ap152 |\
-wlr8100)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-	;;
-
-esr1750 |\
-epg5000)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-	;;
-
-cr5000)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	;;
-
-ap136-010 |\
-ap147-010)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6 at eth1"
-	;;
-
-ap136-020 |\
-ap135-020 |\
-tew-823dru |\
-tl-wr1043nd-v2 |\
-wzr-450hp2)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6 at eth0"
-	;;
-
-archer-c5 |\
-archer-c7 |\
-tl-wdr4900-v2)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6 at eth0" "1:wan"
-	;;
-
-bsb)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "1:lan" "3:lan"  # XXX: confirm cpu port!
-	;;
-
-cpe210|\
-cpe510)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "5:lan" "4:wan"
-	;;
-
-airgatewaypro)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "4:lan" "5:wan"
-	;;
-
-db120 |\
-rb-2011l | \
-rb-2011uas |\
-rb-2011uias |\
-rb-2011uas-2hnd|\
-rb-2011uias-2hnd)
-	case "$board" in
-	rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
+	ap136-010 |\
+	ap147-010)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
-			"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
-	;;
-	*)
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6 at eth1"
+		;;
+
+	ap136-020 |\
+	ap135-020 |\
+	tew-823dru |\
+	tl-wr1043nd-v2 |\
+	wzr-450hp2)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6 at eth0"
+		;;
+
+	archer-c5 |\
+	archer-c7 |\
+	tl-wdr4900-v2)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6 at eth0" "1:wan"
+		;;
+
+	bsb)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "1:lan" "3:lan"  # XXX: confirm cpu port!
+		;;
+
+	cpe210|\
+	cpe510)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "5:lan" "4:wan"
+		;;
+
+	airgatewaypro)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "4:lan" "5:wan"
+		;;
+
+	db120 |\
+	rb-2011l | \
+	rb-2011uas |\
+	rb-2011uias |\
+	rb-2011uas-2hnd|\
+	rb-2011uias-2hnd)
+		case "$board" in
+		rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
+			ucidef_add_switch "switch0" \
+				"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
+		;;
+		*)
+			ucidef_add_switch "switch0" \
+				"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+		;;
+		esac
+
+		ucidef_add_switch "switch1" \
+			"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
+		;;
+
+	dir-825-b1|\
+	tew-673gru)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
+		;;
+
+	f9k1115v2)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"2:lan" "3:lan" "4:lan" "5:lan" "6 at eth1" \
+			"0 at eth0" "1:wan"  # XXX: confirm cpu ports!
+		;;
+
+	nbg460n_550n_550nh)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
+		;;
+
+	nbg6616 |\
+	nbg6716)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" \
+			"5:wan" "6 at eth1"
+		;;
+
+	ap143 |\
+	rb-433 |\
+	rb-433u)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "5 at eth1"
+		;;
+
+	rb-435g)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "1:lan" "2:lan" # XXX: confirm!
+		;;
+
+	rb-450)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth1"
+		;;
+
+	rb-450g |\
+	routerstation-pro)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+
+	ap136 |\
+	rb-750gl |\
+	rb-751g |\
+	rb-951g-2hnd |\
+	wzr-hp-g450h)
 		ucidef_add_switch "switch0" \
 			"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-	;;
+		;;
+
+	rb-951ui-2hnd)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
+
+	rb-493g)
+		ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		ucidef_add_switch "switch1" \
+			"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
+	wzr-hp-g300nh2 |\
+	pb92 |\
+	ap113)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
+		;;
+
+	el-m150)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "3 at eth1" # XXX: confirm!
+		;;
+
+	tellstick-znet-lite)
+		ucidef_set_interface_wan "eth0"
+		ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
+		;;
+
+	tl-wdr4300|\
+	tl-wr1041n-v2)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+		;;
+
+	tl-wr1043nd)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5 at eth0"
+		;;
+
+	tl-wr2543n)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9 at eth0"
+		;;
+
+	tl-wr841n-v1|\
+	tl-wr941nd)
+		ucidef_set_interface_raw "eth" "eth0"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+
+	dir-615-i1 |\
+	omy-g1 |\
+	r6100 |\
+	smart-300 |\
+	tl-mr3420-v2 |\
+	tl-wr841n-v8 |\
+	tl-wr842n-v2 |\
+	tl-wr941nd-v5 |\
+	tl-wr941nd-v6 |\
+	tl-wdr6500-v2 |\
+	wnr2000-v3 |\
+	wnr2000-v4 |\
+	wnr2200 |\
+	wnr612-v2 |\
+	wnr1000-v2 |\
+	wpn824n)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4 at eth1" # XXX: confirm!
+		;;
+
+	uap-pro)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:wan"
+		;;
+
+	nanostation-m-xw)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "5:lan" "1:wan"
+		;;
+
+	wrt160nl)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4 at eth0"
+		;;
+
+	wzr-hp-g300nh)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
+		;;
+
+	cr3000)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0"  \
+			"0 at eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+		;;
+
+	dgl-5500-a1 |\
+	dir-825-c1)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
+	mynet-n750)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
+	onion-omega)
+		ucidef_set_interface_lan "wlan0"
+		;;
+
+	dhp-1565-a1 |\
+	dir-835-a1 |\
+	wndr3700v4 | \
+	wndr4300)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
+	esr900)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
+	dlan-hotspot |\
+	dlan-pro-500-wp)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+
+	dlan-pro-1200-ac)
+		ucidef_set_interface_lan "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan" "3:lan" "4:lan"
+		ucidef_add_switch_attr "switch0" "enable" "false"
+		;;
+
+	alfa-ap120c |\
+	all0305 |\
+	antminer-s1 |\
+	antminer-s3 |\
+	antrouter-r1 |\
+	aw-nr580 |\
+	bullet-m |\
+	c-55 |\
+	cap4200ag |\
+	eap300v2 |\
+	eap7660d |\
+	el-mini |\
+	loco-m-xw |\
+	mr1750 |\
+	mr1750v2 |\
+	mr18 |\
+	mr600 |\
+	mr600v2 |\
+	mr900 |\
+	mr900v2 |\
+	rb-411 |\
+	rb-911g-2hpnd |\
+	rb-911g-5hpacd |\
+	rb-911g-5hpnd |\
+	rb-912uag-2hpnd |\
+	rb-912uag-5hpnd |\
+	rb-sxt2n |\
+	rb-sxt5n |\
+	rocket-m-xw |\
+	tl-mr10u |\
+	tl-mr11u |\
+	tl-mr12u |\
+	tl-mr13u |\
+	tl-mr3020 |\
+	tl-mr3040 |\
+	tl-mr3040-v2 |\
+	tl-wa701nd-v2 |\
+	tl-wa7210n-v2 |\
+	tl-wa750re |\
+	tl-wa850re |\
+	tl-wa830re-v2 |\
+	tl-wa801nd-v2 |\
+	tl-wa901nd |\
+	tl-wa901nd-v2 |\
+	tl-wa901nd-v3 |\
+	tl-wa901nd-v4 |\
+	tl-wr703n |\
+	tube2h |\
+	unifiac-lite |\
+	wndap360 |\
+	mynet-rext |\
+	wp543)
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	cap324)
+		ucidef_set_interface_lan "eth0" "dhcp"
+		;;
+
+	arduino-yun |\
+	tl-wa801nd-v3 |\
+	dir-505-a1)
+		ucidef_set_interface_lan "eth1"
+		;;
+
+	alfa-ap96 |\
+	alfa-nx |\
+	ap83 |\
+	gl-ar150 |\
+	gl-ar300m |\
+	gl-domino |\
+	gl-inet |\
+	gl-mifi |\
+	jwap003 |\
+	pb42 |\
+	pb44 |\
+	routerstation|\
+	tl-wr710n |\
+	tl-wr720n-v3|\
+	tl-wr810n |\
+	wpe72 |\
+	wrtnode2q)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
+
+	gl-ar300)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
+
+	jwap230)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "5:wan" "6 at eth1"
+		;;
+
+	wpj342)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:wan"
+		;;
+
+	wpj344)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "3:lan" "2:wan"
+		;;
+
+	unifiac-pro)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan" "3:wan"
+		;;
+
+	dr531 |\
+	wpj531)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	wpj558)
+		ucidef_add_switch "switch0" \
+			"5:lan" "1:wan" "6 at eth0"
+		;;
+
+	ap121 |\
+	ap121-mini |\
+	ap96 |\
+	airrouter |\
+	dir-600-a1 |\
+	dir-615-c1 |\
+	dir-615-e1 |\
+	dir-615-e4 |\
+	hiwifi-hc6361 |\
+	ja76pf |\
+	mc-mac1200r|\
+	minibox-v1 |\
+	mynet-n600 |\
+	oolite |\
+	qihoo-c301 |\
+	rb-750 |\
+	rb-751 |\
+	som9331 |\
+	tew-632brp |\
+	tew-712br |\
+	tew-732br |\
+	tl-mr3220 |\
+	tl-mr3220-v2 |\
+	tl-mr3420 |\
+	tl-wdr3320-v2 |\
+	tl-wdr3500 |\
+	tl-wr741nd |\
+	tl-wr741nd-v4 |\
+	tl-wr841n-v7 |\
+	tl-wr841n-v9 |\
+	tl-wr841n-v11 |\
+	tl-wr842n-v3 |\
+	whr-g301n |\
+	whr-hp-g300n |\
+	whr-hp-gn |\
+	wzr-hp-ag300h |\
+	zbt-we1526)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+
+	wzr-hp-g450h)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
+		;;
+
+	ew-dorin)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:wan"
+		;;
+
+	ew-dorin-router)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" "0 at eth0" "2:lan" "3:lan"
+		;;
+
+	wndr3700)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
+
+		# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+		ucidef_add_switch_attr "switch0" "blinkrate" 2
+
+		# Port 1 controls the GREEN configuration of LEDs for
+		# the switch and the section does not correspond to a real
+		# switch port.
+		#
+		# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+		# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+		# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+		# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+		# 14: Link (master); 15: separate register
+		ucidef_add_switch_port_attr "switch0" 1 led 6
+
+		# Port 2 controls the ORANGE configuration of LEDs for
+		# the switch and the section does not correspond to a real
+		# switch port.
+		#
+		# See the key above for switch port 1 for the meaning of the
+		# 'led' setting below.
+		ucidef_add_switch_port_attr "switch0" 2 led 9
+
+		# Port 5 controls the configuration of the WAN LED and the
+		# section does not correspond to a real switch port.
+		#
+		# To toggle the use of green or orange LEDs for the WAN port,
+		# see the LED setting for wndr3700:green:wan in /etc/config/system.
+		#
+		# See the key above for switch port 1 for the meaning of the
+		# 'led' setting below.
+		ucidef_add_switch_port_attr "switch0" 5 led 2
+		;;
+
+	z1)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
+		;;
+
+	*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	esac
+}
+
+ar71xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+
+	case $board in
+	dgl-5500-a1|\
+	dir-825-c1)
+		wan_mac=$(mtd_get_mac_ascii nvram "wan_mac")
+		;;
+	dhp-1565-a1|\
+	dir-835-a1|\
+	wndr3700v4|\
+	wndr4300)
+		lan_mac=$(mtd_get_mac_binary caldata 0)
+		wan_mac=$(mtd_get_mac_binary caldata 6)
+		;;
+	esr900)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
+		;;
+	mynet-n750)
+		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+		;;
 	esac
 
-	ucidef_add_switch "switch1" \
-		"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
-	;;
-
-dir-825-b1|\
-tew-673gru)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
-	;;
-
-f9k1115v2)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"2:lan" "3:lan" "4:lan" "5:lan" "6 at eth1" \
-		"0 at eth0" "1:wan"  # XXX: confirm cpu ports!
-	;;
-
-nbg460n_550n_550nh)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
-	;;
-
-nbg6616 |\
-nbg6716)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" \
-		"5:wan" "6 at eth1"
-	;;
-
-ap143 |\
-rb-433 |\
-rb-433u)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"1:lan" "2:lan" "5 at eth1"
-	;;
-
-rb-435g)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "1:lan" "2:lan" # XXX: confirm!
-	;;
-
-rb-450)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth1"
-	;;
-
-rb-450g |\
-routerstation-pro)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "2:lan:3" "3:lan:2" "4:lan:1"
-	;;
-
-ap136 |\
-rb-750gl |\
-rb-751g |\
-rb-951g-2hnd |\
-wzr-hp-g450h)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-	;;
-
-rb-951ui-2hnd)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	;;
-
-rb-493g)
-	ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-	ucidef_add_switch "switch1" \
-		"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	;;
-
-wzr-hp-g300nh2 |\
-pb92 |\
-ap113)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
-	;;
-
-el-m150)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "3 at eth1" # XXX: confirm!
-	;;
-
-tellstick-znet-lite)
-	ucidef_set_interface_wan "eth0"
-	ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
-	;;
-
-tl-wdr4300|\
-tl-wr1041n-v2)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-	;;
-
-tl-wr1043nd)
-	ucidef_add_switch "switch0" \
-		"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5 at eth0"
-	;;
-
-tl-wr2543n)
-	ucidef_add_switch "switch0" \
-		"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9 at eth0"
-	;;
-
-tl-wr841n-v1|\
-tl-wr941nd)
-	ucidef_set_interface_raw "eth" "eth0"
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-	;;
-
-dir-615-i1 |\
-omy-g1 |\
-r6100 |\
-smart-300 |\
-tl-mr3420-v2 |\
-tl-wr841n-v8 |\
-tl-wr842n-v2 |\
-tl-wr941nd-v5 |\
-tl-wr941nd-v6 |\
-tl-wdr6500-v2 |\
-wnr2000-v3 |\
-wnr2000-v4 |\
-wnr2200 |\
-wnr612-v2 |\
-wnr1000-v2 |\
-wpn824n)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4 at eth1" # XXX: confirm!
-	;;
-
-uap-pro)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:wan"
-	;;
-
-nanostation-m-xw)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "5:lan" "1:wan"
-	;;
-
-wrt160nl)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4 at eth0"
-	;;
-
-wzr-hp-g300nh)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
-	;;
-
-cr3000)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0"  \
-		"0 at eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-	;;
-
-dgl-5500-a1 |\
-dir-825-c1)
-	local mac
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	mac=$(mtd_get_mac_ascii nvram "wan_mac")
-	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
-	;;
-
-mynet-n750)
-	local mac
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	mac=$(mtd_get_mac_ascii devdata "wanmac")
-	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
-	;;
-
-onion-omega)
-	ucidef_set_interface_lan "wlan0"
-	;;
-
-dhp-1565-a1 |\
-dir-835-a1 |\
-wndr3700v4 | \
-wndr4300)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	mac_lan=$(mtd_get_mac_binary caldata 0)
-	[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
-	mac_wan=$(mtd_get_mac_binary caldata 6)
-	[ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan"
-	;;
-
-esr900)
-	local mac
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
-	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
-	;;
-
-dlan-hotspot |\
-dlan-pro-500-wp)
-	ucidef_set_interface_lan "eth0 eth1"
-	;;
-
-dlan-pro-1200-ac)
-	ucidef_set_interface_lan "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan" "3:lan" "4:lan"
-	ucidef_add_switch_attr "switch0" "enable" "false"
-	;;
-
-alfa-ap120c |\
-all0305 |\
-antminer-s1 |\
-antminer-s3 |\
-antrouter-r1 |\
-aw-nr580 |\
-bullet-m |\
-c-55 |\
-cap4200ag |\
-eap300v2 |\
-eap7660d |\
-el-mini |\
-loco-m-xw |\
-mr1750 |\
-mr1750v2 |\
-mr18 |\
-mr600 |\
-mr600v2 |\
-mr900 |\
-mr900v2 |\
-rb-411 |\
-rb-911g-2hpnd |\
-rb-911g-5hpacd |\
-rb-911g-5hpnd |\
-rb-912uag-2hpnd |\
-rb-912uag-5hpnd |\
-rb-sxt2n |\
-rb-sxt5n |\
-rocket-m-xw |\
-tl-mr10u |\
-tl-mr11u |\
-tl-mr12u |\
-tl-mr13u |\
-tl-mr3020 |\
-tl-mr3040 |\
-tl-mr3040-v2 |\
-tl-wa701nd-v2 |\
-tl-wa7210n-v2 |\
-tl-wa750re |\
-tl-wa850re |\
-tl-wa830re-v2 |\
-tl-wa801nd-v2 |\
-tl-wa901nd |\
-tl-wa901nd-v2 |\
-tl-wa901nd-v3 |\
-tl-wa901nd-v4 |\
-tl-wr703n |\
-tube2h |\
-unifiac-lite |\
-wndap360 |\
-mynet-rext |\
-wp543)
-	ucidef_set_interface_lan "eth0"
-	;;
-
-cap324)
-	ucidef_set_interface_lan "eth0" "dhcp"
-	;;
-
-arduino-yun |\
-tl-wa801nd-v3 |\
-dir-505-a1)
-	ucidef_set_interface_lan "eth1"
-	;;
-
-alfa-ap96 |\
-alfa-nx |\
-ap83 |\
-gl-ar150 |\
-gl-ar300m |\
-gl-domino |\
-gl-inet |\
-gl-mifi |\
-jwap003 |\
-pb42 |\
-pb44 |\
-routerstation|\
-tl-wr710n |\
-tl-wr720n-v3|\
-tl-wr810n |\
-wpe72 |\
-wrtnode2q)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	;;
-
-gl-ar300)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_add_switch "switch0" \
-		"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-	;;
-
-jwap230)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "5:wan" "6 at eth1"
-	;;
-
-wpj342)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:wan"
-	;;
-
-wpj344)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "3:lan" "2:wan"
-	;;
-
-unifiac-pro)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan" "3:wan"
-	;;
-
-dr531 |\
-wpj531)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	;;
-
-wpj558)
-	ucidef_add_switch "switch0" \
-		"5:lan" "1:wan" "6 at eth0"
-	;;
-
-ap121 |\
-ap121-mini |\
-ap96 |\
-airrouter |\
-dir-600-a1 |\
-dir-615-c1 |\
-dir-615-e1 |\
-dir-615-e4 |\
-hiwifi-hc6361 |\
-ja76pf |\
-mc-mac1200r|\
-minibox-v1 |\
-mynet-n600 |\
-oolite |\
-qihoo-c301 |\
-rb-750 |\
-rb-751 |\
-som9331 |\
-tew-632brp |\
-tew-712br |\
-tew-732br |\
-tl-mr3220 |\
-tl-mr3220-v2 |\
-tl-mr3420 |\
-tl-wdr3320-v2 |\
-tl-wdr3500 |\
-tl-wr741nd |\
-tl-wr741nd-v4 |\
-tl-wr841n-v7 |\
-tl-wr841n-v9 |\
-tl-wr841n-v11 |\
-tl-wr842n-v3 |\
-whr-g301n |\
-whr-hp-g300n |\
-whr-hp-gn |\
-wzr-hp-ag300h |\
-zbt-we1526)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-	;;
-
-wzr-hp-g450h)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
-	;;
-
-ew-dorin)
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:wan"
-	;;
-
-ew-dorin-router)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" "0 at eth0" "2:lan" "3:lan"
-	;;
-
-wndr3700)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
-
-	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
-	ucidef_add_switch_attr "switch0" "blinkrate" 2
-
-	# Port 1 controls the GREEN configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
-	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
-	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
-	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
-	# 14: Link (master); 15: separate register
-	ucidef_add_switch_port_attr "switch0" 1 led 6
-
-	# Port 2 controls the ORANGE configuration of LEDs for
-	# the switch and the section does not correspond to a real
-	# switch port.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-	ucidef_add_switch_port_attr "switch0" 2 led 9
-
-	# Port 5 controls the configuration of the WAN LED and the
-	# section does not correspond to a real switch port.
-	#
-	# To toggle the use of green or orange LEDs for the WAN port,
-	# see the LED setting for wndr3700:green:wan in /etc/config/system.
-	#
-	# See the key above for switch port 1 for the meaning of the
-	# 'led' setting below.
-	ucidef_add_switch_port_attr "switch0" 5 led 2
-	;;
-
-z1)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
-	;;
-
-*)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	;;
-esac
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+}
 
+board_config_update
+board=$(ar71xx_board_name)
+ar71xx_setup_interfaces $board
+ar71xx_setup_macs $board
 board_config_flush
 
 exit 0



More information about the lede-commits mailing list