[source] lantiq: add Falcon support
LEDE Commits
lede-commits at lists.infradead.org
Sun Nov 27 08:42:22 PST 2016
hauke pushed a commit to source.git, branch master:
https://git.lede-project.org/93715427835e747f0e0b348c8a3ce91dd68ef4f9
commit 93715427835e747f0e0b348c8a3ce91dd68ef4f9
Author: Hauke Mehrtens <hauke at hauke-m.de>
AuthorDate: Sun Oct 2 18:39:50 2016 +0200
lantiq: add Falcon support
This adds support for the Intel Falcon SoC for GPON.
Support for the Falcon SoC was removed in commit c8218363951 svn rev:
40392 from OpenWrt, this commit adds it again.
This patch adds a new subtarget for the Falcon SoC, but it still misses
all the drivers needed to control the GPON part.
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
target/linux/lantiq/Makefile | 2 +-
target/linux/lantiq/dts/EASY88388.dts | 110 ++++++
target/linux/lantiq/dts/EASY88444.dts | 84 +++++
target/linux/lantiq/dts/EASY98000-base.dtsi | 114 +++++++
target/linux/lantiq/dts/EASY98000NAND.dts | 40 +++
target/linux/lantiq/dts/EASY98000NOR.dts | 38 +++
target/linux/lantiq/dts/EASY98000SFLASH.dts | 16 +
target/linux/lantiq/dts/EASY98020.dts | 99 ++++++
target/linux/lantiq/dts/EASY98020V18.dts | 72 ++++
target/linux/lantiq/dts/EASY98021.dts | 85 +++++
target/linux/lantiq/dts/EASY98035SYNCE.dts | 80 +++++
target/linux/lantiq/dts/EASY98035SYNCE1588.dts | 80 +++++
target/linux/lantiq/dts/FALCON-MDU.dts | 57 ++++
target/linux/lantiq/dts/FALCON-SFP.dts | 80 +++++
target/linux/lantiq/dts/falcon-sflash-16M.dtsi | 37 +++
target/linux/lantiq/dts/falcon.dtsi | 388 ++++++++++++++++++++++
target/linux/lantiq/falcon/config-default | 10 +
target/linux/lantiq/falcon/profiles/00-default.mk | 9 +
target/linux/lantiq/falcon/target.mk | 13 +
target/linux/lantiq/image/Makefile | 81 +++++
20 files changed, 1494 insertions(+), 1 deletion(-)
diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index d3721f6..66f3e76 100644
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
BOARD:=lantiq
BOARDNAME:=Lantiq
FEATURES:=squashfs
-SUBTARGETS:=xrx200 xway xway_legacy
+SUBTARGETS:=xrx200 xway xway_legacy falcon
MAINTAINER:=John Crispin <john at phrozen.org>
KERNEL_PATCHVER:=4.4
diff --git a/target/linux/lantiq/dts/EASY88388.dts b/target/linux/lantiq/dts/EASY88388.dts
new file mode 100644
index 0000000..30264dc
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY88388.dts
@@ -0,0 +1,110 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY88388 - Lantiq Falcon FTTDP8 Reference Board";
+ compatible = "lantiq,falcon-easy88388", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io34", "io35", "io36", "io37", "io38",
+ "io39", "io40", "io41";
+ lantiq,function = "gpio";
+ };
+ };
+
+ easy88388-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy88388:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ TEST {
+ label = "easy88388:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ STATUS {
+ label = "easy88388:green:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ ERROR {
+ label = "easy88388:red:error";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ DSL1 {
+ label = "easy88388:dsl:1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL2 {
+ label = "easy88388:dsl:2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL3 {
+ label = "easy88388:dsl:3";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL4 {
+ label = "easy88388:dsl:4";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL5 {
+ label = "easy88388:dsl:5";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL6 {
+ label = "easy88388:dsl:6";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL7 {
+ label = "easy88388:dsl:7";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ DSL8 {
+ label = "easy88388:dsl:8";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ };
+};
+
diff --git a/target/linux/lantiq/dts/EASY88444.dts b/target/linux/lantiq/dts/EASY88444.dts
new file mode 100644
index 0000000..f157150
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY88444.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board";
+ compatible = "lantiq,falcon-easy88444", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io34", "io35", "io37";
+ lantiq,function = "gpio";
+ };
+ };
+
+ easy88444-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy88444:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ TEST {
+ label = "easy88444:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ STATUS {
+ label = "easy88444:green:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ GFAST1 {
+ label = "easy88444:gfast:1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GFAST2 {
+ label = "easy88444:gfast:2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GFAST3 {
+ label = "easy88444:gfast:3";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GFAST4 {
+ label = "easy88444:gfast:4";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ };
+};
+
diff --git a/target/linux/lantiq/dts/EASY98000-base.dtsi b/target/linux/lantiq/dts/EASY98000-base.dtsi
new file mode 100644
index 0000000..2032870
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000-base.dtsi
@@ -0,0 +1,114 @@
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "lantiq,falcon-easy98000", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ easy98000-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>;
+
+ LED_0 {
+ label = "easy98000:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_1 {
+ label = "easy98000:red:gpon";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_2 {
+ label = "easy98000:green:gpon_tx";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_3 {
+ label = "easy98000:green:gpon_rx";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_4 {
+ label = "easy98000:green:voice";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_5 {
+ label = "easy98000:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
+&ebu_cs1 {
+ eth0: ethernet at 0000000 {
+ compatible = "davicom,dm9000";
+ device_type = "network";
+ reg = <0x0000003 0x1>, <0x0000001 0x1>;
+ reg-names = "addr", "data";
+ interrupt-parent = <&gpio1>;
+ #interrupt-cells = <2>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpld at 3c00000 {
+ compatible = "lantiq,easy98000_addon";
+ reg = <0x3c00000 0x2>;
+ };
+
+ cpld at 3c0000c {
+ compatible = "lantiq,easy98000_cpld_led";
+ reg = <0x3c0000c 0x2>, <0x3c00012 0x2>;
+ };
+};
+
+/* // enable this for second uart:
+&serial1 {
+ status = "okay";
+};*/
+
+&spi {
+ status = "okay";
+
+ eeprom at 1 {
+ compatible = "atmel,at25", "atmel,at25160n";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ spi-cpol;
+
+ pagesize = <32>;
+ size = <2048>;
+ address-width = <16>;
+ };
+};
+
+&i2c {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ /* eeprom-emulation by OMU */
+ eeprom at 50 {
+ compatible = "at,24c02";
+ reg = <0x50>;
+ };
+ eeprom at 51 {
+ compatible = "at,24c02";
+ reg = <0x51>;
+ };
+};
+
diff --git a/target/linux/lantiq/dts/EASY98000NAND.dts b/target/linux/lantiq/dts/EASY98000NAND.dts
new file mode 100644
index 0000000..18afb99
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000NAND.dts
@@ -0,0 +1,40 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+ model = "EASY98000 - Lantiq Falcon (NAND)";
+ compatible = "lantiq,falcon-easy98000-nand", "lantiq,falcon-easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &spi;
+ };
+};
+
+&ebu_cs0 {
+ gen_nand at 0 {
+ compatible = "gen_nand", "lantiq,nand-falcon";
+ bank-width = <1>;
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,mtd-name = "gen_nand";
+ bbt-use-flash;
+
+ partition at 0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition at 10000 {
+ label = "uboot_env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition at 20000 {
+ label = "linux";
+ reg = <0x80000 0x3d0000>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/EASY98000NOR.dts b/target/linux/lantiq/dts/EASY98000NOR.dts
new file mode 100644
index 0000000..4dbfe41
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000NOR.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+ model = "EASY98000 - Lantiq Falcon (NOR)";
+ compatible = "lantiq,falcon-easy98000-nor", "lantiq,falcon-easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &spi;
+ };
+};
+
+&ebu_cs0 {
+ cfi at 0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0x0 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition at 10000 {
+ label = "uboot_env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition at 20000 {
+ label = "linux";
+ reg = <0x80000 0x3d0000>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/EASY98000SFLASH.dts b/target/linux/lantiq/dts/EASY98000SFLASH.dts
new file mode 100644
index 0000000..90fc52c
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000SFLASH.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98000 - Lantiq Falcon (SFLASH)";
+ compatible = "lantiq,falcon-easy98000-sflash", "lantiq,falcon-easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ spi1 = &spi;
+ };
+};
+
diff --git a/target/linux/lantiq/dts/EASY98020.dts b/target/linux/lantiq/dts/EASY98020.dts
new file mode 100644
index 0000000..7fbe7da
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98020.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98020 - Lantiq Falcon Reference Board";
+ compatible = "lantiq,falcon-easy98020", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: phy-led-pins {
+ lantiq,pins = "io42", "io41", "io38", "io37";
+ lantiq,function = "gpio";
+ };
+ };
+
+ easy98020-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>;
+
+ GPON {
+ label = "easy98020:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98020:green:test";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98020:green:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98020:green:voice";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VIDEO {
+ label = "easy98020:green:video";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ easy98020-phy-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ GE0_ACT {
+ label = "easy98020:ge0_act";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GE0_LINK {
+ label = "easy98020:ge0_link";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GE1_ACT {
+ label = "easy98020:ge1_act";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ GE1_LINK {
+ label = "easy98020:ge1_link";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/EASY98020V18.dts b/target/linux/lantiq/dts/EASY98020V18.dts
new file mode 100644
index 0000000..1ddb921
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98020V18.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98020 - Lantiq Falcon Reference Board V1.8";
+ compatible = "lantiq,falcon-easy98020-V18", "lantiq,falcon-easy98020", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+ lantiq,function = "gpio";
+ };
+ };
+
+ easy98020-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy98020:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98020:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98020:green:status";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98020:green:voice";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VIDEO {
+ label = "easy98020:green:video";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/EASY98021.dts b/target/linux/lantiq/dts/EASY98021.dts
new file mode 100644
index 0000000..b2574ac
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98021.dts
@@ -0,0 +1,85 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98021 - Lantiq Falcon HGU Reference Board";
+ compatible = "lantiq,falcon-easy98021", "lantiq,falcon-easy98020", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-mmc {
+ /* Place-holder for SIM-Card connector,
+ to list the used GPIOs, no official binding */
+ compatible = "gpio-mmc";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
+ <&gpio0 3 GPIO_ACTIVE_HIGH>,
+ <&gpio0 2 GPIO_ACTIVE_HIGH>,
+ <0>; /* no CS */
+ gpio-names = "di", "do", "clk", "cs";
+ reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+ lantiq,function = "gpio";
+ };
+ };
+
+ easy98021-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy98021:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98021:red:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98021:green:status";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98021:green:voice";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ SIMCARD {
+ label = "easy98021:green:simcard";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
diff --git a/target/linux/lantiq/dts/EASY98035SYNCE.dts b/target/linux/lantiq/dts/EASY98035SYNCE.dts
new file mode 100644
index 0000000..fa65a8c
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98035SYNCE.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98035SYNCE - Lantiq Falcon SFP Stick with SyncE";
+ compatible = "lantiq,falcon-easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
diff --git a/target/linux/lantiq/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/dts/EASY98035SYNCE1588.dts
new file mode 100644
index 0000000..2e14eb3
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98035SYNCE1588.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE/1588";
+ compatible = "lantiq,falcon-easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
diff --git a/target/linux/lantiq/dts/FALCON-MDU.dts b/target/linux/lantiq/dts/FALCON-MDU.dts
new file mode 100644
index 0000000..1d459c4
--- /dev/null
+++ b/target/linux/lantiq/dts/FALCON-MDU.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "MDU - Lantiq Falcon / Vinax MDU Board";
+ compatible = "lantiq,falcon-mdu", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ mdu-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>;
+
+ LED_0 {
+ label = "mdu:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_1 {
+ label = "mdu:green:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_2 {
+ label = "mdu:green:2";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_3 {
+ label = "mdu:green:3";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_4 {
+ label = "mdu:green:4";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
diff --git a/target/linux/lantiq/dts/FALCON-SFP.dts b/target/linux/lantiq/dts/FALCON-SFP.dts
new file mode 100644
index 0000000..df2026c
--- /dev/null
+++ b/target/linux/lantiq/dts/FALCON-SFP.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+ model = "SFP - Lantiq Falcon SFP Stick";
+ compatible = "lantiq,falcon-sfp", "lantiq,falcon";
+
+ chosen {
+ bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
diff --git a/target/linux/lantiq/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/dts/falcon-sflash-16M.dtsi
new file mode 100644
index 0000000..d95acc2
--- /dev/null
+++ b/target/linux/lantiq/dts/falcon-sflash-16M.dtsi
@@ -0,0 +1,37 @@
+
+&ebu_cs0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sflash-falcon", "simple-bus";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
+ reg = <0 0>;
+ linux,mtd-name = "sflash";
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partition at 0 {
+ reg = <0x0 0x40000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition at 40000 {
+ reg = <0x40000 0x80000>;
+ label = "uboot_env";
+ };
+
+ partition at C0000 {
+ reg = <0xC0000 0x740000>;
+ label = "image0";
+ };
+
+ partition at 800000 {
+ reg = <0x800000 0x800000>;
+ label = "image1";
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/falcon.dtsi b/target/linux/lantiq/dts/falcon.dtsi
new file mode 100644
index 0000000..76dde61
--- /dev/null
+++ b/target/linux/lantiq/dts/falcon.dtsi
@@ -0,0 +1,388 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,falcon";
+
+ cpus {
+ cpu at 0 {
+ compatible = "mips,mips34kc";
+ };
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+
+ cpu_clk: cpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ clock-output-names = "cpu";
+ };
+
+ io_clk: io {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "io";
+ };
+
+ fpi_clk: fpi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "fpi";
+ };
+ };
+
+ ebu_cs0: localbus at 10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+ reg = <0x10000000 0x4000000>;
+ ranges = <0x0 0x10000000 0x4000000>;
+ };
+ ebu_cs1: localbus at 14000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+ reg = <0x14000000 0x4000000>;
+ ranges = <0x0 0x14000000 0x4000000>;
+ };
+
+ ebu at 18000000 {
+ compatible = "lantiq,ebu-falcon";
+ reg = <0x18000000 0x100>;
+ };
+
+ sbs2 at 1D000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sysb2", "simple-bus";
+ reg = <0x1D000000 0x1000000>;
+ ranges = <0x0 0x1D000000 0x1000000>;
+
+ clock_sysgpe: clock-controller at 700000 {
+ compatible = "lantiq,sysgpe-falcon";
+ reg = <0x700000 0x100>;
+ #clock-cells = <1>;
+ };
+
+ mps at 4000 {
+ compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <154 155>;
+ lantiq,mbx = <&mpsmbx>;
+ };
+
+ gpio0: gpio at 810000 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <44>;
+ reg = <0x810000 0x80>;
+ clocks = <&clock_syseth 16>;
+ };
+
+ gpio2: gpio at 810100 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <46>;
+ reg = <0x810100 0x80>;
+ clocks = <&clock_syseth 17>;
+ };
+
+ clock_syseth: clock-controller at B00000 {
+ compatible = "lantiq,syseth-falcon";
+ reg = <0xB00000 0x100>;
+ #clock-cells = <1>;
+ };
+
+ pad at B01000 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0xB01000 0x100>;
+ lantiq,bank = <0>;
+ clocks = <&clock_syseth 20>;
+ };
+
+ pad at B02000 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0xB02000 0x100>;
+ lantiq,bank = <2>;
+ clocks = <&clock_syseth 21>;
+ };
+ };
+
+ fpi at 1E000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ reg = <0x1E000000 0x1000000>;
+ ranges = <0x0 0x1E000000 0x1000000>;
+
+ serial1: serial at 100B00 {
+ status = "disabled";
+ compatible = "lantiq,asc";
+ reg = <0x100B00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ line = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&asc1_pins>;
+ clocks = <&clock_sys1 11>;
+ };
+
+ serial0: serial at 100C00 {
+ compatible = "lantiq,asc";
+ reg = <0x100C00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <104 105 106>;
+ line = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&asc0_pins>;
+ clocks = <&clock_sys1 12>;
+ };
+
+ spi: spi at 100D00 {
+ status = "disabled";
+ compatible = "intel,falcon-spi", "intel,xrx100-spi", "lantiq,spi-lantiq-ssc";
+ interrupts = <22 23 24 25>;
+ interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100D00 0x100>;
+ interrupt-parent = <&icu0>;
+ clocks = <&clock_sys1 13>;
+ base_cs = <1>;
+ num_cs = <2>;
+ };
+
+ gptc at 100E00 {
+ compatible = "lantiq,gptc-falcon";
+ reg = <0x100E00 0x100>;
+ };
+
+ i2c: i2c at 200000 {
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,lantiq-i2c";
+ reg = <0x200000 0x10000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <18 19 20 21>;
+ gpios = <&gpio1 7 0 &gpio1 8 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ clocks = <&clock_sys1 14>;
+ };
+
+ gpio1: gpio at 800100 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <45>;
+ reg = <0x800100 0x100>;
+ clocks = <&clock_sys1 16>;
+ };
+
+ gpio3: gpio at 800200 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <47>;
+ reg = <0x800200 0x100>;
+ clocks = <&clock_sys1 17>;
+ };
+
+ gpio4: gpio at 800300 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <48>;
+ reg = <0x800300 0x100>;
+ clocks = <&clock_sys1 18>;
+ };
+
+ pad at 800400 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800400 0x100>;
+ lantiq,bank = <1>;
+ clocks = <&clock_sys1 20>;
+ };
+
+ pad at 800500 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800500 0x100>;
+ lantiq,bank = <3>;
+ clocks = <&clock_sys1 21>;
+ };
+
+ pad at 800600 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800600 0x100>;
+ lantiq,bank = <4>;
+ clocks = <&clock_sys1 22>;
+ };
+
+ status at 802000 {
+ compatible = "lantiq,status-falcon";
+ reg = <0x802000 0x80>;
+ };
+
+ clock_sys1: clock-controller at F00000 {
+ compatible = "lantiq,sys1-falcon";
+ reg = <0xF00000 0x100>;
+ #clock-cells = <1>;
+ };
+ };
+
+ sbs0 at 1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0x1F000000 0x400000>;
+ ranges = <0x0 0x1F000000 0x400000>;
+
+ mpsmbx: mpsmbx at 200000 {
+ reg = <0x200000 0x200>;
+ };
+ };
+
+ sbs1 at 1F700000 {
+
+ };
+
+ biu at 1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x800000>;
+
+ icu0: icu at 80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog at 803F0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803F0 0x10>;
+ clocks = <&io_clk>; /* currently no effect */
+ };
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ /*ntr {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };*/
+ hrst {
+ lantiq,groups = "hrst";
+ lantiq,function = "rst";
+ };
+ };
+
+ asc0_pins: asc0 {
+ asc0 {
+ lantiq,groups = "asc0";
+ lantiq,function = "asc";
+ };
+ };
+ asc1_pins: asc1 {
+ asc1 {
+ lantiq,groups = "asc1";
+ lantiq,function = "asc";
+ };
+ };
+ i2c_pins: i2c {
+ i2c {
+ lantiq,groups = "i2c";
+ lantiq,function = "i2c";
+ };
+ };
+ bootled_pins: bootled {
+ bootled {
+ lantiq,groups = "bootled";
+ lantiq,function = "led";
+ };
+ };
+ ntr_ntr8k: ntr8k {
+ ntr8k {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };
+ };
+ ntr_pps: pps {
+ pps {
+ lantiq,groups = "pps";
+ lantiq,function = "ntr";
+ };
+ };
+ ntr_gpio: gpio {
+ gpio {
+ lantiq,pins = "io5";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ };
+ slic_pins: slic {
+ slic {
+ lantiq,groups = "slic";
+ lantiq,function = "slic";
+ };
+ };
+ };
+
+ pinselect-ntr {
+ compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
+ pinctrl-names = "ntr8k", "pps", "gpio";
+ pinctrl-0 = <&ntr_ntr8k>;
+ pinctrl-1 = <&ntr_pps>;
+ pinctrl-2 = <&ntr_gpio>;
+ };
+
+ pinselect-asc1 {
+ compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
+ pinctrl-names = "default", "asc1";
+ pinctrl-0 = <&slic_pins>;
+ pinctrl-1 = <&asc1_pins>;
+ };
+
+};
diff --git a/target/linux/lantiq/falcon/config-default b/target/linux/lantiq/falcon/config-default
new file mode 100644
index 0000000..de4fa36
--- /dev/null
+++ b/target/linux/lantiq/falcon/config-default
@@ -0,0 +1,10 @@
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
+CONFIG_PINCTRL_FALCON=y
+# CONFIG_PSB6970_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+CONFIG_SOC_FALCON=y
+# CONFIG_SOC_TYPE_XWAY is not set
+# CONFIG_SOC_XWAY is not set
+CONFIG_SPI_FALCON=y
diff --git a/target/linux/lantiq/falcon/profiles/00-default.mk b/target/linux/lantiq/falcon/profiles/00-default.mk
new file mode 100644
index 0000000..26bc8b5
--- /dev/null
+++ b/target/linux/lantiq/falcon/profiles/00-default.mk
@@ -0,0 +1,9 @@
+define Profile/Default
+ NAME:=Default Profile
+ PRIORITY:=1
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
diff --git a/target/linux/lantiq/falcon/target.mk b/target/linux/lantiq/falcon/target.mk
new file mode 100644
index 0000000..b87d1dc
--- /dev/null
+++ b/target/linux/lantiq/falcon/target.mk
@@ -0,0 +1,13 @@
+ARCH:=mips
+SUBTARGET:=falcon
+BOARDNAME:=Falcon
+FEATURES:=squashfs mips16 nand
+CPU_TYPE:=24kc
+
+DEFAULT_PACKAGES+= kmod-leds-gpio \
+ kmod-gpio-button-hotplug \
+ kmod-ledtrig-heartbeat
+
+define Target/Description
+ Lantiq Falcon
+endef
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 2e0fdb3..490bd54 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -565,4 +565,85 @@ TARGET_DEVICES += VGV7519BRN
endif
+
+ifeq ($(SUBTARGET),falcon)
+
+define Device/EASY98000
+ IMAGE_SIZE := 3904k
+ DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NOR
+ DEVICE_DTS := EASY98000NOR
+ DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
+endef
+TARGET_DEVICES += EASY98000
+
+define Device/EASY98000NAND
+ IMAGE_SIZE := 3904k
+ DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NAND
+ DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
+endef
+TARGET_DEVICES += EASY98000NAND
+
+define Device/EASY98000SFLASH
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board SFLASH
+ DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
+endef
+TARGET_DEVICES += EASY98000SFLASH
+
+define Device/FALCON-MDU
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := MDU - Lantiq Falcon / VINAXdp MDU Board
+endef
+TARGET_DEVICES += FALCON-MDU
+
+define Device/EASY88388
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY88388 - Lantiq Falcon FTTDP8 Reference Board
+endef
+TARGET_DEVICES += EASY88388
+
+define Device/EASY88444
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board
+endef
+TARGET_DEVICES += EASY88444
+
+define Device/FALCON-SFP
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := SFP - Lantiq Falcon SFP Stick
+endef
+TARGET_DEVICES += FALCON-SFP
+
+define Device/EASY98035SYNCE
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98035SYNCE - Lantiq Falcon SFP Stick with Synchronous Ethernet
+endef
+TARGET_DEVICES += EASY98035SYNCE
+
+define Device/EASY98035SYNCE1588
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE and IEEE1588
+endef
+TARGET_DEVICES += EASY98035SYNCE1588
+
+define Device/EASY98020
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98020 - Lantiq Falcon SFU Reference Board
+endef
+TARGET_DEVICES += EASY98020
+
+define Device/EASY98020V18
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98020V18 - Lantiq Falcon SFU Reference Board V1.8
+endef
+TARGET_DEVICES += EASY98020V18
+
+define Device/EASY98021
+ IMAGE_SIZE := 7424k
+ DEVICE_TITLE := EASY98021 - Lantiq Falcon HGU Reference Board
+endef
+TARGET_DEVICES += EASY98021
+
+endif
+
$(eval $(call BuildImage))
More information about the lede-commits
mailing list