[source] firmware-utils: Add support for the Cisco Meraki MX60/MX60W
LEDE Commits
lede-commits at lists.infradead.org
Mon Nov 21 02:25:10 PST 2016
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/a72e1692b8b35d61587d75cf1800eef934203cd2
commit a72e1692b8b35d61587d75cf1800eef934203cd2
Author: Chris Blake <chrisrblake93 at gmail.com>
AuthorDate: Wed Nov 16 08:35:54 2016 -0600
firmware-utils: Add support for the Cisco Meraki MX60/MX60W
This patch adds header support for the Cisco Meraki MX60/MX60W, which
are a part of the apm821xx target. Some structure changes were needed
due to the fact this device uses U-Boot (unlike other devices in
mkmerakifw.c) which uses a different header structure to define the load
offsets for the image.
A thanks to Christian for helping implement this properly.
Cc: Christian Lamparter <chunkeey at gmail.com>
Signed-off-by: Chris Blake <chrisrblake93 at gmail.com>
---
tools/firmware-utils/src/mkmerakifw.c | 69 +++++++++++++++++++++++++++++------
1 file changed, 58 insertions(+), 11 deletions(-)
diff --git a/tools/firmware-utils/src/mkmerakifw.c b/tools/firmware-utils/src/mkmerakifw.c
index 61b81c6..6394cba 100644
--- a/tools/firmware-utils/src/mkmerakifw.c
+++ b/tools/firmware-utils/src/mkmerakifw.c
@@ -32,13 +32,27 @@
#define HDR_OFF_IMAGELEN 8
#define HDR_OFF_CHECKSUM 12
#define HDR_OFF_MAGIC2 32
-#define HDR_OFF_FILLER 36
+#define HDR_OFF_MAGIC3 36
#define HDR_OFF_STATICHASH 40
+#define HDR_OFF_KERNEL_OFFSET 40
+#define HDR_OFF_RAMDISK_OFFSET 44
+#define HDR_OFF_FDT_OFFSET 48
+#define HDR_OFF_UNKNOWN_OFFSET 52
struct board_info {
- uint32_t magic;
+ uint32_t magic1;
+ uint32_t magic2;
+ uint32_t magic3;
uint32_t imagelen;
- unsigned char statichash[20];
+ union {
+ unsigned char statichash[20];
+ struct {
+ uint32_t kernel_offset;
+ uint32_t ramdisk_offset;
+ uint32_t fdt_offset;
+ uint32_t unknown_offset;
+ } mx60;
+ };
char *id;
char *description;
};
@@ -55,7 +69,8 @@ static const struct board_info boards[] = {
{
.id = "mr18",
.description = "Meraki MR18 Access Point",
- .magic = 0x8e73ed8a,
+ .magic1 = 0x8e73ed8a,
+ .magic2 = 0x8e73ed8a,
.imagelen = 0x00800000,
.statichash = {0xda, 0x39, 0xa3, 0xee, 0x5e,
0x6b, 0x4b, 0x0d, 0x32, 0x55,
@@ -64,14 +79,34 @@ static const struct board_info boards[] = {
}, {
.id = "mr24",
.description = "Meraki MR24 Access Point",
- .magic = 0x8e73ed8a,
+ .magic1 = 0x8e73ed8a,
+ .magic2 = 0x8e73ed8a,
.imagelen = 0x00800000,
.statichash = {0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff},
}, {
-
+ .id = "mx60",
+ .description = "Meraki MX60/MX60W Security Appliance",
+ .magic1 = 0x8e73ed8a,
+ .magic2 = 0xa1f0beef, /* Enables use of load addr in statichash */
+ .magic3 = 0x00060001, /* This goes along with magic2 */
+ .imagelen = 0x3fd00000,
+ /* The static hash below does the following:
+ * 1st Row: Kernel Offset
+ * 2nd Row: Ramdisk Offset
+ * 3rd Row: FDT Offset
+ * 4th Row: ? Unused/Unknown ?
+ * 5th Row: ? Unused/Unknown ?
+ */
+ .mx60 = {
+ .kernel_offset = 0x10000,
+ .ramdisk_offset = 0x3FFC00,
+ .fdt_offset = 0x0400,
+ .unknown_offset = 0x0400,
+ },
+ }, {
/* terminating entry */
}
};
@@ -237,10 +272,10 @@ int main(int argc, char *argv[])
kernel = buf + HDR_LENGTH;
fread(kernel, klen, 1, in);
- /* Write magic values and filler */
- writel(buf, HDR_OFF_MAGIC1, board->magic);
- writel(buf, HDR_OFF_MAGIC2, board->magic);
- writel(buf, HDR_OFF_FILLER, 0);
+ /* Write magic values */
+ writel(buf, HDR_OFF_MAGIC1, board->magic1);
+ writel(buf, HDR_OFF_MAGIC2, board->magic2);
+ writel(buf, HDR_OFF_MAGIC3, board->magic3);
/* Write header and image length */
writel(buf, HDR_OFF_HDRLEN, HDR_LENGTH);
@@ -248,7 +283,19 @@ int main(int argc, char *argv[])
/* Write checksum and static hash */
sha1_csum(kernel, klen, buf + HDR_OFF_CHECKSUM);
- memcpy(buf + HDR_OFF_STATICHASH, board->statichash, 20);
+
+ switch (board->magic2) {
+ case 0xa1f0beef:
+ writel(buf, HDR_OFF_KERNEL_OFFSET, board->mx60.kernel_offset);
+ writel(buf, HDR_OFF_RAMDISK_OFFSET, board->mx60.ramdisk_offset);
+ writel(buf, HDR_OFF_FDT_OFFSET, board->mx60.fdt_offset),
+ writel(buf, HDR_OFF_UNKNOWN_OFFSET, board->mx60.unknown_offset);
+ break;
+
+ case 0x8e73ed8a:
+ memcpy(buf + HDR_OFF_STATICHASH, board->statichash, 20);
+ break;
+ }
/* Save finished image */
out = fopen(ofname, "w");
More information about the lede-commits
mailing list