[source] ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
LEDE Commits
lede-commits at lists.infradead.org
Mon Nov 21 01:58:00 PST 2016
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/31952dbd1c40a2cd015ef435bd64fa9b2bb87eec
commit 31952dbd1c40a2cd015ef435bd64fa9b2bb87eec
Author: Piotr Dymacz <pepe2k at gmail.com>
AuthorDate: Wed Oct 5 02:24:58 2016 +0200
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 +
target/linux/ar71xx/base-files/etc/diag.sh | 7 +-
target/linux/ar71xx/base-files/lib/ar71xx.sh | 11 +-
.../ar71xx/base-files/lib/upgrade/platform.sh | 3 +
target/linux/ar71xx/config-4.4 | 3 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 32 ++-
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 3 +
.../files/arch/mips/ath79/mach-cf-e316n-v2.c | 273 ++++++++++++++++++---
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 3 +
target/linux/ar71xx/image/generic.mk | 27 +-
10 files changed, 329 insertions(+), 42 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 2a1138c..4490c09 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -115,6 +115,15 @@ cf-e316n-v2)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
+cf-e320n-v2)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
+ ;;
+cf-e520n|\
+cf-e530n)
+ ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
+ ;;
cpe210|\
cpe510)
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bfd619a..e1e76a4 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -86,9 +86,14 @@ get_status_led() {
cap4200ag)
status_led="senao:green:pwr"
;;
- cf-e316n-v2)
+ cf-e316n-v2|\
+ cf-e520n|\
+ cf-e530n)
status_led="$board:blue:wan"
;;
+ cf-e320n-v2)
+ status_led="$board:blue:wlan"
+ ;;
cpe510)
status_led="tp-link:green:link4"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 9495bf4..0b82d83 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -497,9 +497,18 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
- *"COMFAST CF-E316N v2")
+ *"CF-E316N v2")
name="cf-e316n-v2"
;;
+ *"CF-E320N v2")
+ name="cf-e320n-v2"
+ ;;
+ *CF-E520N)
+ name="cf-e520n"
+ ;;
+ *CF-E530N)
+ name="cf-e530n"
+ ;;
*"CPE210/220")
name="cpe210"
tplink_pharos_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 2358c58..fa12870 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -182,6 +182,9 @@ platform_check_image() {
c-55|\
carambola2|\
cf-e316n-v2|\
+ cf-e320n-v2|\
+ cf-e520n|\
+ cf-e530n|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-505-a1|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index aa20f9b..cc93515 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -62,6 +62,9 @@ CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
+CONFIG_ATH79_MACH_CF_E320N_V2=y
+CONFIG_ATH79_MACH_CF_E520N=y
+CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ac8255b..73f8d21 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1677,7 +1677,7 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E316N_V2
- bool "COMFAST CF-E316N v2 board"
+ bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
@@ -1686,6 +1686,36 @@ config ATH79_MACH_CF_E316N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_CF_E320N_V2
+ bool "COMFAST CF-E320N v2 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E520N
+ bool "COMFAST CF-E520N support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E530N
+ bool "COMFAST CF-E530N support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_BHU_BXU2000N2_A
bool "BHU BXU2000n-2 rev. A support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 78e242a..24b3ea0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -68,6 +68,9 @@ obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
index cf3d33a..d958bad 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
@@ -1,9 +1,10 @@
/*
- * COMFAST CF-E316N v2
- * by Shenzhen Four Seas Global Link Network Technology Co., Ltd
- *
- * aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+ * Support for COMFAST boards:
+ * - CF-E316N v2 (AR9341)
+ * - CF-E320N v2 (QCA9531)
+ * - CF-E520N/CF-E530N (QCA9531)
*
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k at gmail.com>
* Copyright (C) 2015 Paul Fertser <fercerpav at gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
@@ -27,72 +28,171 @@
#include "dev-usb.h"
#include "machtypes.h"
+#define CF_EXXXN_KEYS_POLL_INTERVAL 20
+#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL)
+
+/* CF-E316N v2 */
+#define CF_E316N_V2_GPIO_LED_DIAG_B 0
+#define CF_E316N_V2_GPIO_LED_DIAG_R 2
+#define CF_E316N_V2_GPIO_LED_DIAG_G 3
+#define CF_E316N_V2_GPIO_LED_WLAN 12
+#define CF_E316N_V2_GPIO_LED_WAN 17
+#define CF_E316N_V2_GPIO_LED_LAN 19
+
+#define CF_E316N_V2_GPIO_EXT_WDT 16
+
+#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13
+#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14
+
+#define CF_E316N_V2_GPIO_BTN_RESET 20
+
static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
{
.name = "cf-e316n-v2:blue:diag",
- .gpio = 0,
+ .gpio = CF_E316N_V2_GPIO_LED_DIAG_B,
.active_low = 0,
}, {
.name = "cf-e316n-v2:red:diag",
- .gpio = 2,
+ .gpio = CF_E316N_V2_GPIO_LED_DIAG_R,
.active_low = 0,
}, {
.name = "cf-e316n-v2:green:diag",
- .gpio = 3,
+ .gpio = CF_E316N_V2_GPIO_LED_DIAG_G,
.active_low = 0,
}, {
.name = "cf-e316n-v2:blue:wlan",
- .gpio = 12,
+ .gpio = CF_E316N_V2_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:wan",
- .gpio = 17,
+ .gpio = CF_E316N_V2_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:lan",
- .gpio = 19,
+ .gpio = CF_E316N_V2_GPIO_LED_LAN,
.active_low = 1,
},
};
static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
{
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CF_E316N_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+/* CF-E320N v2 */
+#define CF_E320N_V2_GPIO_LED_WLAN 0
+#define CF_E320N_V2_GPIO_LED_WAN 2
+#define CF_E320N_V2_GPIO_LED_LAN 3
+
+#define CF_E320N_V2_GPIO_HEADER_J9_1 14
+#define CF_E320N_V2_GPIO_HEADER_J9_2 12
+#define CF_E320N_V2_GPIO_HEADER_J9_3 11
+#define CF_E320N_V2_GPIO_HEADER_J9_4 16
+
+#define CF_E320N_V2_GPIO_EXT_WDT 13
+
+#define CF_E320N_V2_GPIO_BTN_RESET 17
+
+static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = {
+ {
+ .name = "cf-e320n-v2:green:lan",
+ .gpio = CF_E320N_V2_GPIO_LED_LAN,
+ .active_low = 0,
+ }, {
+ .name = "cf-e320n-v2:red:wan",
+ .gpio = CF_E320N_V2_GPIO_LED_WAN,
+ .active_low = 0,
+ }, {
+ .name = "cf-e320n-v2:blue:wlan",
+ .gpio = CF_E320N_V2_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
+ {
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
- .debounce_interval = 60,
- .gpio = 20,
+ .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CF_E320N_V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
-/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
-#define EXT_WATCHDOG_GPIO 16
+/* CF-E520N/CF-E530N */
+#define CF_E5X0N_GPIO_LED_WAN 11
+#define CF_E5X0N_GPIO_BTN_RESET 17
+
+static struct gpio_led cf_e520n_leds_gpio[] __initdata = {
+ {
+ .name = "cf-e520n:blue:wan",
+ .gpio = CF_E5X0N_GPIO_LED_WAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led cf_e530n_leds_gpio[] __initdata = {
+ {
+ .name = "cf-e530n:blue:wan",
+ .gpio = CF_E5X0N_GPIO_LED_WAN,
+ .active_low = 1,
+ }
+};
+
+/*
+ * Some COMFAST devices include external hardware watchdog chip,
+ * Pericon Technology PT7A7514, connected to a selected GPIO
+ * and WiSoC RESET_L input. Watchdog time-out is ~1.6 s.
+ */
+#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500
+
static struct timer_list gpio_wdt_timer;
-static void gpio_wdt_toggle(unsigned long period)
+static void gpio_wdt_toggle(unsigned long gpio)
{
static int state;
+
state = !state;
- gpio_set_value(EXT_WATCHDOG_GPIO, state);
- mod_timer(&gpio_wdt_timer, jiffies + period);
+ gpio_set_value(gpio, state);
+
+ mod_timer(&gpio_wdt_timer,
+ jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
}
-static void __init cf_e316n_v2_setup(void)
+static void __init cf_exxxn_common_setup(int gpio_wdt)
{
- u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
- u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
- u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
- u8 tmpmac[ETH_ALEN];
+ u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
+
+ if (gpio_wdt > -1) {
+ gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
+ "PT7A7514 watchdog");
- gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
- gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
- setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
- gpio_wdt_toggle(msecs_to_jiffies(1));
+ setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt);
+ gpio_wdt_toggle(gpio_wdt);
+ }
ath79_register_m25p80(NULL);
+ ath79_register_wmac(art, NULL);
+
+ ath79_register_usb();
+}
+
+static void __init cf_e316n_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
+
+ cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
+
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
ath79_register_mdio(1, 0x0);
/* GMAC0 is connected to the PHY0 of the internal switch */
@@ -101,32 +201,129 @@ static void __init cf_e316n_v2_setup(void)
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
ath79_register_eth(1);
/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
- gpio_request(13, "RF Amp 1");
- gpio_direction_output(13, 1);
- gpio_request(14, "RF Amp 2");
- gpio_direction_output(14, 1);
- ath79_init_mac(tmpmac, macwlan, 0);
- ath79_register_wmac(ee, tmpmac);
+ gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH,
+ "WLAN PA0");
+ gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH,
+ "WLAN PA1");
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
cf_e316n_v2_leds_gpio);
- ath79_register_gpio_keys_polled(1, 20,
+ ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e316n_v2_gpio_keys),
cf_e316n_v2_gpio_keys);
-
- /* J1 is a High-Speed USB port, pin 1 is Vcc */
- ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
cf_e316n_v2_setup);
+
+static void __init cf_exxxn_qca953x_eth_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+}
+
+static void __init cf_e320n_v2_setup(void)
+{
+ cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
+
+ cf_exxxn_qca953x_eth_setup();
+
+ /* Disable JTAG (enables GPIO0-3) */
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true);
+ ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true);
+ ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true);
+
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0);
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0);
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0);
+
+ /* Enable GPIO function for GPIOs in J9 header */
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0);
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0);
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0);
+ ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio),
+ cf_e320n_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cf_e320n_v2_gpio_keys),
+ cf_e320n_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
+ cf_e320n_v2_setup);
+
+static void __init cf_e5x0n_gpio_setup(void)
+{
+ ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
+
+ ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0);
+
+ ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cf_e320n_v2_gpio_keys),
+ cf_e320n_v2_gpio_keys);
+}
+
+static void __init cf_e520n_setup(void)
+{
+ cf_exxxn_common_setup(-1);
+
+ cf_exxxn_qca953x_eth_setup();
+
+ cf_e5x0n_gpio_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio),
+ cf_e520n_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
+ cf_e520n_setup);
+
+static void __init cf_e530n_setup(void)
+{
+ cf_exxxn_common_setup(-1);
+
+ cf_exxxn_qca953x_eth_setup();
+
+ cf_e5x0n_gpio_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio),
+ cf_e530n_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N",
+ cf_e530n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index dec3d60..741ebb2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -53,6 +53,9 @@ enum ath79_mach_type {
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
+ ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
+ ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
+ ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index d6142c1..e80c853 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -23,10 +23,35 @@ define Device/cf-e316n-v2
BOARDNAME = CF-E316N-V2
IMAGE_SIZE = 16192k
CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
+define Device/cf-e320n-v2
+ $(Device/cf-e316n-v2)
+ DEVICE_TITLE := COMFAST CF-E320N v2
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = CF-E320N-V2
+endef
+TARGET_DEVICES += cf-e320n-v2
+
+define Device/cf-e520n
+ DEVICE_TITLE := COMFAST CF-E520N
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = CF-E520N
+ IMAGE_SIZE = 8000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e520n
+
+define Device/cf-e530n
+ $(Device/cf-e520n)
+ DEVICE_TITLE := COMFAST CF-E530N
+ BOARDNAME = CF-E530N
+endef
+TARGET_DEVICES += cf-e530n
+
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k
More information about the lede-commits
mailing list