[source] ramips: add support for ZyXEL Keenetic Viva
LEDE Commits
lede-commits at lists.infradead.org
Fri Nov 18 01:14:47 PST 2016
mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/348344874c8aaaeabd291eef0e45660f0c6aba95
commit 348344874c8aaaeabd291eef0e45660f0c6aba95
Author: Vitaly Chekryzhev <13hakta at gmail.com>
AuthorDate: Sat Oct 29 17:26:58 2016 +0500
ramips: add support for ZyXEL Keenetic Viva
Factory image can be installed via Zyxel WebUI.
Signed-off-by: Vitaly Chekryzhev <13hakta at gmail.com>
[removed linux,modalias parameter from flash node in dts]
[removed sdhci node from dts; no sd card slot here]
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 4 +
.../linux/ramips/base-files/etc/board.d/02_network | 7 +
target/linux/ramips/base-files/etc/diag.sh | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/kng_rc.dts | 154 +++++++++++++++++++++
target/linux/ramips/image/mt7620.mk | 14 ++
7 files changed, 184 insertions(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0f1ad57..ed51555 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -203,6 +203,10 @@ ht-tm02)
ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
set_wifi_led "$board:blue:wlan"
;;
+kng_rc)
+ set_usb_led "$board:green:usb"
+ set_wifi_led "$board:green:wifi"
+ ;;
m2m)
set_wifi_led "$board:blue:wifi"
ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1e97c3b..5ae6413 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -204,6 +204,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6 at eth0"
;;
+ kng_rc)
+ ucidef_add_switch "switch1" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t at eth0"
+ ;;
mlwg2|\
wizard8800|\
wl-330n)
@@ -320,6 +324,9 @@ ramips_setup_macs()
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ kng_rc)
+ wan_mac=$(mtd_get_mac_binary factory 28)
+ ;;
linkits7688 | \
linkits7688d)
wan_mac=$(mtd_get_mac_binary factory 4)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 52baa0b..1aa1a2e 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -24,6 +24,7 @@ get_status_led() {
dir-860l-b1|\
e1700|\
fonera20n|\
+ kng_rc|\
mzk-750dhp|\
mzk-dp150n|\
mzk-w300nh2|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c62f5f6..4a4204b 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -586,6 +586,9 @@ ramips_board_detect() {
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
+ *"ZyXEL Keenetic Viva")
+ name="kng_rc"
+ ;;
*"YK1")
name="youku-yk1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index fa108b6..a7e9e19 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,7 @@ platform_check_image() {
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
+ kng_rc|\
linkits7688|\
linkits7688d|\
m2m|\
diff --git a/target/linux/ramips/dts/kng_rc.dts b/target/linux/ramips/dts/kng_rc.dts
new file mode 100644
index 0000000..fefa1b7
--- /dev/null
+++ b/target/linux/ramips/dts/kng_rc.dts
@@ -0,0 +1,154 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ZyXEL Keenetic Viva";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "kng_rc:green:wan";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "kng_rc:green:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power_alert {
+ label = "kng_rc:red:power";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "kng_rc:green:wifi";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "kng_rc:green:power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ rtl8367rb {
+ compatible = "realtek,rtl8367b";
+ cpu_port = <7>;
+ realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
+ mdio = <&mdio0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+ mtd-mac-address = <&factory 0x00004>;
+
+ port at 4 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+
+ mdio0: mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy at 4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 35c94fe..e669b8c 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -37,6 +37,10 @@ define Build/elecom-header
$(STAGING_DIR_HOST)/bin/tar -cf $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
endef
+define Build/zyimage
+ $(STAGING_DIR_HOST)/bin/zyimage $(1) $@
+endef
+
define Device/ArcherC20i
DTS := ArcherC20i
KERNEL := $(KERNEL_DTB)
@@ -418,3 +422,13 @@ define Device/dch-m225
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += dch-m225
+
+define Device/kng_rc
+ DTS := kng_rc
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := ZyXEL Keenetic Viva
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | zyimage -d 8997 -v "ZyXEL Keenetic Viva"
+endef
+TARGET_DEVICES += kng_rc
More information about the lede-commits
mailing list