[source] ipq806x: fix pcie reset gpios

[LEDE Commits]

blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/524d7a7cdeb12b2061dfadf91e12f3355d908f19

commit 524d7a7cdeb12b2061dfadf91e12f3355d908f19
Author: Pavel Kubelun <be.dissent at gmail.com>
AuthorDate: Thu Nov 3 21:34:30 2016 +0300

    ipq806x: fix pcie reset gpios
    
    Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it.
    
    Signed-off-by: Pavel Kubelun <be.dissent at gmail.com>
---
 target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi      | 6 +++---
 .../112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch      | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index cae5fdc..f09ec92 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -830,7 +830,7 @@
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 
 			status = "disabled";
 		};
@@ -882,7 +882,7 @@
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
 
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 
 			status = "disabled";
 		};
@@ -934,7 +934,7 @@
 			pinctrl-0 = <&pcie2_pins>;
 			pinctrl-names = "default";
 
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 
 			status = "disabled";
 		};
diff --git a/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
index 1246bfe..2394926 100644
--- a/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
@@ -143,7 +143,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 +			pinctrl-0 = <&pcie0_pins>;
 +			pinctrl-names = "default";
 +
-+			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
++			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 +
 +			status = "disabled";
 +		};
@@ -189,7 +189,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 +			pinctrl-0 = <&pcie1_pins>;
 +			pinctrl-names = "default";
 +
-+			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
++			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 +
 +			status = "disabled";
 +		};
@@ -235,7 +235,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 +			pinctrl-0 = <&pcie2_pins>;
 +			pinctrl-names = "default";
 +
-+			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
++			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 +
 +			status = "disabled";
 +		};