[source] bgmac: backport small DMA fix

LEDE Commits lede-commits at lists.infradead.org
Mon Nov 7 05:44:00 PST 2016


rmilecki pushed a commit to source.git, branch master:
https://git.lede-project.org/e2a65f4aa550d59e8ddda2d84e73c200f76ce543

commit e2a65f4aa550d59e8ddda2d84e73c200f76ce543
Author: Rafał Miłecki <rafal at milecki.pl>
AuthorDate: Mon Nov 7 14:40:24 2016 +0100

    bgmac: backport small DMA fix
    
    It's supposed to significantly improve performance but doesn't seem to
    affect Northstar unfortunately. It seems only some other platforms were
    limited because of this DMA setup mistake.
    
    Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 ...fix-spelling-mistake-connecton-connection.patch | 25 +++++++++
 ...clearing-DMA-receive-control-register-rig.patch | 59 ++++++++++++++++++++++
 ...ix-reversed-checks-for-clock-control-flag.patch |  2 +-
 .../patches-4.4/773-bgmac-add-srab-switch.patch    |  6 +--
 4 files changed, 88 insertions(+), 4 deletions(-)

diff --git a/target/linux/generic/patches-4.4/077-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch b/target/linux/generic/patches-4.4/077-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch
new file mode 100644
index 0000000..9abe559
--- /dev/null
+++ b/target/linux/generic/patches-4.4/077-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch
@@ -0,0 +1,25 @@
+From c121f72a66c5f92fbe2fc53baa274eef39875cec Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king at canonical.com>
+Date: Mon, 24 Oct 2016 23:46:18 +0100
+Subject: [PATCH] net: bgmac: fix spelling mistake: "connecton" -> "connection"
+
+trivial fix to spelling mistake in dev_err message
+
+Signed-off-by: Colin Ian King <colin.king at canonical.com>
+Acked-by: Jon Mason <jon.mason at broadcom.com>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/ethernet/broadcom/bgmac.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -1465,7 +1465,7 @@ static int bgmac_phy_connect(struct bgma
+ 	phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
+ 			      PHY_INTERFACE_MODE_MII);
+ 	if (IS_ERR(phy_dev)) {
+-		dev_err(bgmac->dev, "PHY connecton failed\n");
++		dev_err(bgmac->dev, "PHY connection failed\n");
+ 		return PTR_ERR(phy_dev);
+ 	}
+ 
diff --git a/target/linux/generic/patches-4.4/077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch b/target/linux/generic/patches-4.4/077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
new file mode 100644
index 0000000..0c47678
--- /dev/null
+++ b/target/linux/generic/patches-4.4/077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
@@ -0,0 +1,59 @@
+From fcdefccac976ee51dd6071832b842d8fb41c479c Mon Sep 17 00:00:00 2001
+From: Andy Gospodarek <gospo at broadcom.com>
+Date: Mon, 31 Oct 2016 13:32:03 -0400
+Subject: [PATCH] bgmac: stop clearing DMA receive control register right after
+ it is set
+
+Current bgmac code initializes some DMA settings in the receive control
+register for some hardware and then immediately clears those settings.
+Not clearing those settings results in ~420Mbps *improvement* in
+throughput; this system can now receive frames at line-rate on Broadcom
+5871x hardware compared to ~520Mbps today.  I also tested a few other
+values but found there to be no discernible difference in CPU
+utilization even if burst size and prefetching values are different.
+
+On the hardware tested there was no need to keep the code that cleared
+all but bits 16-17, but since there is a wide variety of hardware that
+used this driver (I did not look at all hardware docs for hardware using
+this IP block), I find it wise to move this call up and clear bits just
+after reading the default value from the hardware rather than completely
+removing it.
+
+This is a good candidate for -stable >=3.14 since that is when the code
+that was supposed to improve performance (but did not) was introduced.
+
+Signed-off-by: Andy Gospodarek <gospo at broadcom.com>
+Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...")
+Cc: Hauke Mehrtens <hauke at hauke-m.de>
+Acked-by: Hauke Mehrtens <hauke at hauke-m.de>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/ethernet/broadcom/bgmac.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
+index 31ca204..91cbf92 100644
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -307,6 +307,10 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ 	u32 ctl;
+ 
+ 	ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
++
++	/* preserve ONLY bits 16-17 from current hardware value */
++	ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
++
+ 	if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) {
+ 		ctl &= ~BGMAC_DMA_RX_BL_MASK;
+ 		ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
+@@ -317,7 +321,6 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ 		ctl &= ~BGMAC_DMA_RX_PT_MASK;
+ 		ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
+ 	}
+-	ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
+ 	ctl |= BGMAC_DMA_RX_ENABLE;
+ 	ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
+ 	ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
+-- 
+2.10.1
+
diff --git a/target/linux/generic/patches-4.4/170-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch b/target/linux/generic/patches-4.4/170-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch
index b4c5d7f..97d8951 100644
--- a/target/linux/generic/patches-4.4/170-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch
+++ b/target/linux/generic/patches-4.4/170-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch
@@ -18,7 +18,7 @@ Cc: Jon Mason <jon.mason at broadcom.com>
 
 --- a/drivers/net/ethernet/broadcom/bgmac.c
 +++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1046,9 +1046,9 @@ static void bgmac_enable(struct bgmac *b
+@@ -1049,9 +1049,9 @@ static void bgmac_enable(struct bgmac *b
  
  	mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
  		BGMAC_DS_MM_SHIFT;
diff --git a/target/linux/generic/patches-4.4/773-bgmac-add-srab-switch.patch b/target/linux/generic/patches-4.4/773-bgmac-add-srab-switch.patch
index 49c0dca..990d23d 100644
--- a/target/linux/generic/patches-4.4/773-bgmac-add-srab-switch.patch
+++ b/target/linux/generic/patches-4.4/773-bgmac-add-srab-switch.patch
@@ -12,7 +12,7 @@ Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
  #include <linux/bcm47xx_nvram.h>
  #include "bgmac.h"
  
-@@ -1400,6 +1401,17 @@ static const struct ethtool_ops bgmac_et
+@@ -1403,6 +1404,17 @@ static const struct ethtool_ops bgmac_et
  	.get_drvinfo		= bgmac_get_drvinfo,
  };
  
@@ -30,7 +30,7 @@ Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
  /**************************************************
   * MII
   **************************************************/
-@@ -1536,6 +1548,14 @@ int bgmac_enet_probe(struct bgmac *info)
+@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *info)
  	net_dev->hw_features = net_dev->features;
  	net_dev->vlan_features = net_dev->features;
  
@@ -45,7 +45,7 @@ Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
  	err = register_netdev(bgmac->net_dev);
  	if (err) {
  		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1559,6 +1579,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
+@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
  
  void bgmac_enet_remove(struct bgmac *bgmac)
  {



More information about the lede-commits mailing list