[source] ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator

[LEDE Commits]

neoraider pushed a commit to source.git, branch master:
https://git.lede-project.org/?p=source.git;a=commitdiff;h=adbbfb7ff900c489e6be34b2ec2834172dff7943

commit adbbfb7ff900c489e6be34b2ec2834172dff7943
Author: Matthias Schiffer <mschiffer at universe-factory.net>
AuthorDate: Thu Jul 28 15:59:04 2016 +0200

    ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
    
    The stock firmware uses the single LED as status indicator only. Using the
    same LED both for status and as ethernet indicator is uncommon, and has
    been confusing users who were using the device as a WLAN mesh node (so the
    LED was just off, as no ethernet was connected).
    
    Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index a77147e..d731130 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -201,10 +201,6 @@ dhp-1565-a1)
 	ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
 	;;
 
-dir-505-a1)
-	ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1"
-	;;
-
 dir-600-a1|\
 dir-615-e1|\
 dir-615-e4)