[source] ar71xx: fix default network config of WZR-HP-G300NH and CR3000

[LEDE Commits]

jow pushed a commit to source.git, branch master:
https://git.lede-project.org/?p=source.git;a=commitdiff;h=e633a1b48f8504a17ea1d2d89ed760da03e41380

commit e633a1b48f8504a17ea1d2d89ed760da03e41380
Author: Jo-Philipp Wich <jo at mein.io>
AuthorDate: Wed Jul 20 00:13:15 2016 +0200

    ar71xx: fix default network config of WZR-HP-G300NH and CR3000
    
    The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the
    lan interface to a vlan tagged device while the switch was set up in untagged
    mode, leading to broken lan side ethernet connectivity by default.
    
    Fix the issue by emitting untagged interfaces, consistent with the switch
    setting on the device.
    
    Signed-off-by: Jo-Philipp Wich <jo at mein.io>
---
 target/linux/ar71xx/base-files/etc/board.d/02_network | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 301304a..7c4958a 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -258,13 +258,13 @@ wrt160nl)
 	;;
 
 wzr-hp-g300nh)
-	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "5 at eth0"
 	;;
 
 cr3000)
-	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0"  \
 		"0 at eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
 	;;