[source] bcm53xx: backport driver for Northstar's USB 2.0 PHY
LEDE Commits
lede-commits at lists.infradead.org
Thu Jul 7 05:51:10 PDT 2016
rmilecki pushed a commit to source.git, branch master:
https://git.lede-project.org/?p=source.git;a=commitdiff;h=c74c227e5b2572f461d2b28c54ad3c87051daa6b
commit c74c227e5b2572f461d2b28c54ad3c87051daa6b
Author: Rafał Miłecki <zajec5 at gmail.com>
AuthorDate: Thu Jul 7 14:49:35 2016 +0200
bcm53xx: backport driver for Northstar's USB 2.0 PHY
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
...usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch | 270 +++++++++++++++++++++
...y-bcm-ns-usb2-checking-the-wrong-variable.patch | 32 +++
2 files changed, 302 insertions(+)
diff --git a/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch
new file mode 100644
index 0000000..870bcb8
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/089-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch
@@ -0,0 +1,270 @@
+From d3feb406733544dbf0e239ef945a09decdceac88 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5 at gmail.com>
+Date: Thu, 14 Apr 2016 11:37:43 +0200
+Subject: [PATCH] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Northstar is a family of SoCs used in home routers. They have USB 2.0
+and 3.0 controllers with PHYs that need to be properly initialized.
+This driver provides PHY init support in a generic way and can be bound
+with an EHCI controller driver.
+There are (just a few) registers being defined in bcma header. It's
+because DMU/CRU registers will be also needed in other drivers. We will
+need them e.g. in PCIe controller/PHY driver and at some point probably
+in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
+avoid code duplication.
+
+Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
+Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
+---
+ .../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 ++++
+ drivers/phy/Kconfig | 9 ++
+ drivers/phy/Makefile | 1 +
+ drivers/phy/phy-bcm-ns-usb2.c | 137 +++++++++++++++++++++
+ include/linux/bcma/bcma.h | 1 +
+ include/linux/bcma/bcma_driver_arm_c9.h | 15 +++
+ 6 files changed, 184 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+ create mode 100644 drivers/phy/phy-bcm-ns-usb2.c
+ create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h
+
+diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+new file mode 100644
+index 0000000..a7aee9e
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+@@ -0,0 +1,21 @@
++Driver for Broadcom Northstar USB 2.0 PHY
++
++Required properties:
++- compatible: brcm,ns-usb2-phy
++- reg: iomem address range of DMU (Device Management Unit)
++- reg-names: "dmu", the only needed & supported reg right now
++- clocks: USB PHY reference clock
++- clock-names: "phy-ref-clk", the only needed & supported clock right now
++
++To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
++requires passing phandle to the USB PHY reference clock.
++
++Example:
++ usb2-phy {
++ compatible = "brcm,ns-usb2-phy";
++ reg = <0x1800c000 0x1000>;
++ reg-names = "dmu";
++ #phy-cells = <0>;
++ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
++ clock-names = "phy-ref-clk";
++ };
+diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
+index f6ff76e..f2b458f 100644
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -15,6 +15,15 @@ config GENERIC_PHY
+ phy users can obtain reference to the PHY. All the users of this
+ framework should select this config.
+
++config PHY_BCM_NS_USB2
++ tristate "Broadcom Northstar USB 2.0 PHY Driver"
++ depends on ARCH_BCM_IPROC || COMPILE_TEST
++ depends on HAS_IOMEM && OF
++ select GENERIC_PHY
++ help
++ Enable this to support Broadcom USB 2.0 PHY connected to the USB
++ controller on Northstar family.
++
+ config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
+index f03fa1f..0de09e1 100644
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -3,6 +3,7 @@
+ #
+
+ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
++obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
+ obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+ obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+ obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c
+new file mode 100644
+index 0000000..95ab6b2
+--- /dev/null
++++ b/drivers/phy/phy-bcm-ns-usb2.c
+@@ -0,0 +1,137 @@
++/*
++ * Broadcom Northstar USB 2.0 PHY Driver
++ *
++ * Copyright (C) 2016 Rafał Miłecki <zajec5 at gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/bcma/bcma.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_platform.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++
++struct bcm_ns_usb2 {
++ struct device *dev;
++ struct clk *ref_clk;
++ struct phy *phy;
++ void __iomem *dmu;
++};
++
++static int bcm_ns_usb2_phy_init(struct phy *phy)
++{
++ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
++ struct device *dev = usb2->dev;
++ void __iomem *dmu = usb2->dmu;
++ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
++ int err = 0;
++
++ err = clk_prepare_enable(usb2->ref_clk);
++ if (err < 0) {
++ dev_err(dev, "Failed to prepare ref clock: %d\n", err);
++ goto err_out;
++ }
++
++ ref_clk_rate = clk_get_rate(usb2->ref_clk);
++ if (!ref_clk_rate) {
++ dev_err(dev, "Failed to get ref clock rate\n");
++ err = -EINVAL;
++ goto err_clk_off;
++ }
++
++ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
++
++ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
++ usb_pll_pdiv = usb2ctl;
++ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
++ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
++ } else {
++ usb_pll_pdiv = 1 << 3;
++ }
++
++ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
++ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
++
++ /* Unlock DMU PLL settings with some magic value */
++ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
++
++ /* Write USB 2.0 PLL control setting */
++ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
++ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
++ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
++
++ /* Lock DMU PLL settings */
++ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
++
++err_clk_off:
++ clk_disable_unprepare(usb2->ref_clk);
++err_out:
++ return err;
++}
++
++static const struct phy_ops ops = {
++ .init = bcm_ns_usb2_phy_init,
++ .owner = THIS_MODULE,
++};
++
++static int bcm_ns_usb2_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct bcm_ns_usb2 *usb2;
++ struct resource *res;
++ struct phy_provider *phy_provider;
++
++ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
++ if (!usb2)
++ return -ENOMEM;
++ usb2->dev = dev;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
++ usb2->dmu = devm_ioremap_resource(dev, res);
++ if (IS_ERR(usb2->dmu)) {
++ dev_err(dev, "Failed to map DMU regs\n");
++ return PTR_ERR(usb2->dmu);
++ }
++
++ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
++ if (IS_ERR(usb2->ref_clk)) {
++ dev_err(dev, "Clock not defined\n");
++ return PTR_ERR(usb2->ref_clk);
++ }
++
++ usb2->phy = devm_phy_create(dev, NULL, &ops);
++ if (IS_ERR(dev))
++ return PTR_ERR(dev);
++
++ phy_set_drvdata(usb2->phy, usb2);
++ platform_set_drvdata(pdev, usb2);
++
++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static const struct of_device_id bcm_ns_usb2_id_table[] = {
++ { .compatible = "brcm,ns-usb2-phy", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
++
++static struct platform_driver bcm_ns_usb2_driver = {
++ .probe = bcm_ns_usb2_probe,
++ .driver = {
++ .name = "bcm_ns_usb2",
++ .of_match_table = bcm_ns_usb2_id_table,
++ },
++};
++module_platform_driver(bcm_ns_usb2_driver);
++
++MODULE_LICENSE("GPL v2");
+diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
+index 0367c63..e6b41f4 100644
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -4,6 +4,7 @@
+ #include <linux/pci.h>
+ #include <linux/mod_devicetable.h>
+
++#include <linux/bcma/bcma_driver_arm_c9.h>
+ #include <linux/bcma/bcma_driver_chipcommon.h>
+ #include <linux/bcma/bcma_driver_pci.h>
+ #include <linux/bcma/bcma_driver_pcie2.h>
+diff --git a/include/linux/bcma/bcma_driver_arm_c9.h b/include/linux/bcma/bcma_driver_arm_c9.h
+new file mode 100644
+index 0000000..93bd73d
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_arm_c9.h
+@@ -0,0 +1,15 @@
++#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_
++#define LINUX_BCMA_DRIVER_ARM_C9_H_
++
++/* DMU (Device Management Unit) */
++#define BCMA_DMU_CRU_USB2_CONTROL 0x0164
++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC
++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2
++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000
++#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12
++#define BCMA_DMU_CRU_CLKSET_KEY 0x0180
++#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0
++#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010
++#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000
++
++#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch b/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch
new file mode 100644
index 0000000..81144dc
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/089-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch
@@ -0,0 +1,32 @@
+From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter at oracle.com>
+Date: Tue, 10 May 2016 11:01:33 +0300
+Subject: [PATCH] phy: bcm-ns-usb2: checking the wrong variable
+
+We intended to test "usb2->phy" here instead of "dev".
+
+Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar')
+Signed-off-by: Dan Carpenter <dan.carpenter at oracle.com>
+Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
+---
+ drivers/phy/phy-bcm-ns-usb2.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c
+index 95ab6b2..58dff80 100644
+--- a/drivers/phy/phy-bcm-ns-usb2.c
++++ b/drivers/phy/phy-bcm-ns-usb2.c
+@@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
+ }
+
+ usb2->phy = devm_phy_create(dev, NULL, &ops);
+- if (IS_ERR(dev))
+- return PTR_ERR(dev);
++ if (IS_ERR(usb2->phy))
++ return PTR_ERR(usb2->phy);
+
+ phy_set_drvdata(usb2->phy, usb2);
+ platform_set_drvdata(pdev, usb2);
+--
+1.8.4.5
+
More information about the lede-commits
mailing list