[source] ath9k: add beacon related stability fixes
LEDE Commits
lede-commits at lists.infradead.org
Tue Jul 5 03:40:37 PDT 2016
nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/?p=source.git;a=commitdiff;h=92d856f50a71d0376e491644894507458bc26050
commit 92d856f50a71d0376e491644894507458bc26050
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Tue Jul 5 10:45:17 2016 +0200
ath9k: add beacon related stability fixes
Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
...ct-TSF-adjustment-to-align-the-beacon-tim.patch | 45 ++
...le-channel-context-in-get_-set_-reset_tsf.patch | 70 +++
...k-Use-tsf-offset-helper-in-ath9k_hw_reset.patch | 65 +++
...e-tsf_adjustment-in-mac80211-tsf-getters-.patch | 32 ++
...e-some-defined-constants-to-decrease-verb.patch | 137 ++++++
...eacon-configuration-for-addition-removal-.patch | 544 +++++++++++++++++++++
.../mac80211/patches/530-ath9k_extra_leds.patch | 18 +-
.../patches/548-ath9k_enable_gpio_chip.patch | 4 +-
.../patches/549-ath9k_enable_gpio_buttons.patch | 2 +-
.../patches/910-01-add-support-for-mt7620.patch | 6 +-
10 files changed, 908 insertions(+), 15 deletions(-)
diff --git a/package/kernel/mac80211/patches/312-ath9k-Correct-TSF-adjustment-to-align-the-beacon-tim.patch b/package/kernel/mac80211/patches/312-ath9k-Correct-TSF-adjustment-to-align-the-beacon-tim.patch
new file mode 100644
index 0000000..df43105
--- /dev/null
+++ b/package/kernel/mac80211/patches/312-ath9k-Correct-TSF-adjustment-to-align-the-beacon-tim.patch
@@ -0,0 +1,45 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:20 +0200
+Subject: [PATCH] ath9k: Correct TSF adjustment to align the beacon time
+ correctly
+
+Beacons were not send out at (timestamp % beacon_time == 0) for interfaces
+other than the primary one. To send out beacons with the correct timestamp
+according to 10.1.3.2 of the 802.11 standard the tsf_adjustment has to be
+set to the negative time difference instead of positive. This way the
+later beacons get corrected to have a lower (and similar) timestamp with
+regard to the beacon from slot 0.
+
+I am not aware about any issues that have been caused by this.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -279,17 +279,21 @@ static void ath9k_set_tsfadjust(struct a
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_vif *avp = (void *)vif->drv_priv;
+ struct ath_beacon_config *cur_conf = &avp->chanctx->beacon;
+- u32 tsfadjust;
++ s64 tsfadjust;
+
+ if (avp->av_bslot == 0)
+ return;
+
++ /* tsf_adjust is added to the TSF value. We send out the beacon late,
++ * so need to adjust the TSF starting point to be later in time (i.e.
++ * the theoretical first beacon has a TSF of 0 after correction).
++ */
+ tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
+- tsfadjust = TU_TO_USEC(tsfadjust) / ATH_BCBUF;
++ tsfadjust = -TU_TO_USEC(tsfadjust) / ATH_BCBUF;
+ avp->tsf_adjust = cpu_to_le64(tsfadjust);
+
+- ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n",
+- (unsigned long long)tsfadjust, avp->av_bslot);
++ ath_dbg(common, CONFIG, "tsfadjust is: %lld for bslot: %d\n",
++ (signed long long)tsfadjust, avp->av_bslot);
+ }
+
+ bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif)
diff --git a/package/kernel/mac80211/patches/313-ath9k-Handle-channel-context-in-get_-set_-reset_tsf.patch b/package/kernel/mac80211/patches/313-ath9k-Handle-channel-context-in-get_-set_-reset_tsf.patch
new file mode 100644
index 0000000..ef0afbe
--- /dev/null
+++ b/package/kernel/mac80211/patches/313-ath9k-Handle-channel-context-in-get_-set_-reset_tsf.patch
@@ -0,0 +1,70 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:21 +0200
+Subject: [PATCH] ath9k: Handle channel context in get_/set_/reset_tsf
+
+The ath9k TSF handling routines need to be aware of the channel context that
+is being modified. With this change the TSF related values that are stored
+in each channel context will be correctly tracked and the harware will only
+be updated if the modified context is currently the active one.
+
+Without this change the TSF modifications done using these routines would
+for example be lost during a hardware reset as done by ath_complete_reset.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -1823,11 +1823,18 @@ static void ath9k_bss_info_changed(struc
+ static u64 ath9k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+ {
+ struct ath_softc *sc = hw->priv;
++ struct ath_vif *avp = (void *)vif->drv_priv;
+ u64 tsf;
+
+ mutex_lock(&sc->mutex);
+ ath9k_ps_wakeup(sc);
+- tsf = ath9k_hw_gettsf64(sc->sc_ah);
++ /* Get current TSF either from HW or kernel time. */
++ if (sc->cur_chan == avp->chanctx) {
++ tsf = ath9k_hw_gettsf64(sc->sc_ah);
++ } else {
++ tsf = sc->cur_chan->tsf_val +
++ ath9k_hw_get_tsf_offset(&sc->cur_chan->tsf_ts, NULL);
++ }
+ ath9k_ps_restore(sc);
+ mutex_unlock(&sc->mutex);
+
+@@ -1839,10 +1846,14 @@ static void ath9k_set_tsf(struct ieee802
+ u64 tsf)
+ {
+ struct ath_softc *sc = hw->priv;
++ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ mutex_lock(&sc->mutex);
+ ath9k_ps_wakeup(sc);
+- ath9k_hw_settsf64(sc->sc_ah, tsf);
++ getrawmonotonic(&avp->chanctx->tsf_ts);
++ if (sc->cur_chan == avp->chanctx)
++ ath9k_hw_settsf64(sc->sc_ah, tsf);
++ avp->chanctx->tsf_val = tsf;
+ ath9k_ps_restore(sc);
+ mutex_unlock(&sc->mutex);
+ }
+@@ -1850,11 +1861,15 @@ static void ath9k_set_tsf(struct ieee802
+ static void ath9k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+ {
+ struct ath_softc *sc = hw->priv;
++ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ mutex_lock(&sc->mutex);
+
+ ath9k_ps_wakeup(sc);
+- ath9k_hw_reset_tsf(sc->sc_ah);
++ getrawmonotonic(&avp->chanctx->tsf_ts);
++ if (sc->cur_chan == avp->chanctx)
++ ath9k_hw_reset_tsf(sc->sc_ah);
++ avp->chanctx->tsf_val = 0;
+ ath9k_ps_restore(sc);
+
+ mutex_unlock(&sc->mutex);
diff --git a/package/kernel/mac80211/patches/314-ath9k-Use-tsf-offset-helper-in-ath9k_hw_reset.patch b/package/kernel/mac80211/patches/314-ath9k-Use-tsf-offset-helper-in-ath9k_hw_reset.patch
new file mode 100644
index 0000000..e725a8b
--- /dev/null
+++ b/package/kernel/mac80211/patches/314-ath9k-Use-tsf-offset-helper-in-ath9k_hw_reset.patch
@@ -0,0 +1,65 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:22 +0200
+Subject: [PATCH] ath9k: Use tsf offset helper in ath9k_hw_reset
+
+These changes make ath9k_hw_reset more consistent with other places that
+handle the TSF value by using the same helper routine.
+
+A slight improvement is to not assume that a fixed time of 1.5ms has
+passed for the initval writes when compared to the first write attempt.
+Instead the TSF value is re-calculated which will yield a higher accuracy
+of the restored TSF timer.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -1832,8 +1832,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+ u32 saveLedState;
+ u32 saveDefAntenna;
+ u32 macStaId1;
++ struct timespec tsf_ts;
++ u32 tsf_offset;
+ u64 tsf = 0;
+- s64 usec = 0;
+ int r;
+ bool start_mci_reset = false;
+ bool save_fullsleep = ah->chip_fullsleep;
+@@ -1877,8 +1878,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+ macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+
+ /* Save TSF before chip reset, a cold reset clears it */
++ getrawmonotonic(&tsf_ts);
+ tsf = ath9k_hw_gettsf64(ah);
+- usec = ktime_to_us(ktime_get_raw());
+
+ saveLedState = REG_READ(ah, AR_CFG_LED) &
+ (AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
+@@ -1911,8 +1912,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+ }
+
+ /* Restore TSF */
+- usec = ktime_to_us(ktime_get_raw()) - usec;
+- ath9k_hw_settsf64(ah, tsf + usec);
++ tsf_offset = ath9k_hw_get_tsf_offset(&tsf_ts, NULL);
++ ath9k_hw_settsf64(ah, tsf + tsf_offset);
+
+ if (AR_SREV_9280_20_OR_LATER(ah))
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+@@ -1932,12 +1933,11 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+ /*
+ * Some AR91xx SoC devices frequently fail to accept TSF writes
+ * right after the chip reset. When that happens, write a new
+- * value after the initvals have been applied, with an offset
+- * based on measured time difference
++ * value after the initvals have been applied.
+ */
+ if (AR_SREV_9100(ah) && (ath9k_hw_gettsf64(ah) < tsf)) {
+- tsf += 1500;
+- ath9k_hw_settsf64(ah, tsf);
++ tsf_offset = ath9k_hw_get_tsf_offset(&tsf_ts, NULL);
++ ath9k_hw_settsf64(ah, tsf + tsf_offset);
+ }
+
+ ath9k_hw_init_mfp(ah);
diff --git a/package/kernel/mac80211/patches/315-ath9k-Expose-tsf_adjustment-in-mac80211-tsf-getters-.patch b/package/kernel/mac80211/patches/315-ath9k-Expose-tsf_adjustment-in-mac80211-tsf-getters-.patch
new file mode 100644
index 0000000..c95ab7e
--- /dev/null
+++ b/package/kernel/mac80211/patches/315-ath9k-Expose-tsf_adjustment-in-mac80211-tsf-getters-.patch
@@ -0,0 +1,32 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:23 +0200
+Subject: [PATCH] ath9k: Expose tsf_adjustment in mac80211 tsf getters and
+ setters.
+
+The ath9k driver modifies the TSF for VIFs for the purpose of sending
+beacons in a staggered fashion. This patch exposes this VIF specific
+adjustment of the TSF value to mac80211. Without the change the TSF
+routines handle the hardware TSF value instead of the actual TSF value as
+seen on the air.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -1835,6 +1835,7 @@ static u64 ath9k_get_tsf(struct ieee8021
+ tsf = sc->cur_chan->tsf_val +
+ ath9k_hw_get_tsf_offset(&sc->cur_chan->tsf_ts, NULL);
+ }
++ tsf += le64_to_cpu(avp->tsf_adjust);
+ ath9k_ps_restore(sc);
+ mutex_unlock(&sc->mutex);
+
+@@ -1850,6 +1851,7 @@ static void ath9k_set_tsf(struct ieee802
+
+ mutex_lock(&sc->mutex);
+ ath9k_ps_wakeup(sc);
++ tsf -= le64_to_cpu(avp->tsf_adjust);
+ getrawmonotonic(&avp->chanctx->tsf_ts);
+ if (sc->cur_chan == avp->chanctx)
+ ath9k_hw_settsf64(sc->sc_ah, tsf);
diff --git a/package/kernel/mac80211/patches/316-ath9k-Remove-some-defined-constants-to-decrease-verb.patch b/package/kernel/mac80211/patches/316-ath9k-Remove-some-defined-constants-to-decrease-verb.patch
new file mode 100644
index 0000000..36aaa10
--- /dev/null
+++ b/package/kernel/mac80211/patches/316-ath9k-Remove-some-defined-constants-to-decrease-verb.patch
@@ -0,0 +1,137 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:24 +0200
+Subject: [PATCH] ath9k: Remove some #defined constants to decrease
+ verbosity
+
+The removed ATH9K_SLOT_TIME_X constants simply map the value in microseconds
+to the same integer. These constants were not used consistently, so fix the
+inconsistency issue by replacing all occurances with the integer equivalent.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -50,7 +50,7 @@ static void ath9k_beaconq_config(struct
+ txq = sc->tx.txq_map[IEEE80211_AC_BE];
+ ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be);
+ qi.tqi_aifs = qi_be.tqi_aifs;
+- if (ah->slottime == ATH9K_SLOT_TIME_20)
++ if (ah->slottime == 20)
+ qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
+ else
+ qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
+--- a/drivers/net/wireless/ath/ath9k/dynack.c
++++ b/drivers/net/wireless/ath/ath9k/dynack.c
+@@ -280,7 +280,7 @@ EXPORT_SYMBOL(ath_dynack_sample_ack_ts);
+ void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
+ {
+ /* ackto = slottime + sifs + air delay */
+- u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
++ u32 ackto = 9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ an->ackto = ackto;
+@@ -315,7 +315,7 @@ EXPORT_SYMBOL(ath_dynack_node_deinit);
+ void ath_dynack_reset(struct ath_hw *ah)
+ {
+ /* ackto = slottime + sifs + air delay */
+- u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
++ u32 ackto = 9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ da->lto = jiffies;
+--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
++++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+@@ -45,7 +45,7 @@ void ath9k_htc_beaconq_config(struct ath
+ * Long slot time : 2x cwmin
+ * Short slot time : 4x cwmin
+ */
+- if (ah->slottime == ATH9K_SLOT_TIME_20)
++ if (ah->slottime == 20)
+ qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
+ else
+ qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
+--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
++++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+@@ -678,7 +678,7 @@ static int ath9k_init_priv(struct ath9k_
+
+ for (i = 0; i < ATH9K_HTC_MAX_BCN_VIF; i++)
+ priv->beacon.bslot[i] = NULL;
+- priv->beacon.slottime = ATH9K_SLOT_TIME_9;
++ priv->beacon.slottime = 9;
+
+ ath9k_cmn_init_channels_rates(common);
+ ath9k_cmn_init_crypto(ah);
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -454,7 +454,7 @@ static void ath9k_hw_init_defaults(struc
+ if (AR_SREV_9100(ah))
+ ah->sta_id1_defaults |= AR_STA_ID1_AR9100_BA_FIX;
+
+- ah->slottime = ATH9K_SLOT_TIME_9;
++ ah->slottime = 9;
+ ah->globaltxtimeout = (u32) -1;
+ ah->power_mode = ATH9K_PM_UNDEFINED;
+ ah->htc_reset_init = true;
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -372,7 +372,7 @@ static void ath9k_init_misc(struct ath_s
+
+ common->last_rssi = ATH_RSSI_DUMMY_MARKER;
+ memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
+- sc->beacon.slottime = ATH9K_SLOT_TIME_9;
++ sc->beacon.slottime = 9;
+
+ for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++)
+ sc->beacon.bslot[i] = NULL;
+--- a/drivers/net/wireless/ath/ath9k/mac.h
++++ b/drivers/net/wireless/ath/ath9k/mac.h
+@@ -65,10 +65,6 @@
+ #define INIT_SSH_RETRY 32
+ #define INIT_SLG_RETRY 32
+
+-#define ATH9K_SLOT_TIME_6 6
+-#define ATH9K_SLOT_TIME_9 9
+-#define ATH9K_SLOT_TIME_20 20
+-
+ #define ATH9K_TXERR_XRETRY 0x01
+ #define ATH9K_TXERR_FILT 0x02
+ #define ATH9K_TXERR_FIFO 0x04
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -926,7 +926,7 @@ static void ath9k_vif_iter(struct ath9k_
+ }
+
+ if (!vif->bss_conf.use_short_slot)
+- iter_data->slottime = ATH9K_SLOT_TIME_20;
++ iter_data->slottime = 20;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_AP:
+@@ -999,7 +999,7 @@ void ath9k_calculate_iter_data(struct at
+ */
+ memset(iter_data, 0, sizeof(*iter_data));
+ eth_broadcast_addr(iter_data->mask);
+- iter_data->slottime = ATH9K_SLOT_TIME_9;
++ iter_data->slottime = 9;
+
+ list_for_each_entry(avp, &ctx->vifs, list)
+ ath9k_vif_iter(iter_data, avp->vif->addr, avp->vif);
+@@ -1061,7 +1061,7 @@ static void ath9k_set_offchannel_state(s
+ ah->opmode = vif->type;
+ ah->imask &= ~ATH9K_INT_SWBA;
+ ah->imask &= ~ATH9K_INT_TSFOOR;
+- ah->slottime = ATH9K_SLOT_TIME_9;
++ ah->slottime = 9;
+
+ ath_hw_setbssidmask(common);
+ ath9k_hw_setopmode(ah);
+@@ -1788,6 +1788,7 @@ static void ath9k_bss_info_changed(struc
+ slottime = 9;
+ else
+ slottime = 20;
++
+ if (vif->type == NL80211_IFTYPE_AP) {
+ /*
+ * Defer update, so that connected stations can adjust
diff --git a/package/kernel/mac80211/patches/317-ath9k-Fix-beacon-configuration-for-addition-removal-.patch b/package/kernel/mac80211/patches/317-ath9k-Fix-beacon-configuration-for-addition-removal-.patch
new file mode 100644
index 0000000..360dfbf
--- /dev/null
+++ b/package/kernel/mac80211/patches/317-ath9k-Fix-beacon-configuration-for-addition-removal-.patch
@@ -0,0 +1,544 @@
+From: Benjamin Berg <benjamin.berg at open-mesh.com>
+Date: Mon, 4 Jul 2016 14:37:25 +0200
+Subject: [PATCH] ath9k: Fix beacon configuration for addition/removal of
+ interfaces
+
+This patch fixes some issues with interface reconfiguration. It could
+for example happen that an AP interface in beacon slot 0 was removed
+leaving an IBSS station in one of the other slots. When this happens
+the driver never sends out the beacon as it only tries to send a beacon
+from slot 0.
+
+Appart from that the tracking of required changes to the beacon config is
+relatively complicated and prone to errors.
+
+The approach taken here is to solve reconfiguration issues is to
+reconfigure the beacons when any interface changes. This means that
+the complexity of deciding whether an interface change may modify the
+beacon configuration is gone. It also means that the beacon config will
+be reliably updated when an interface is removed.
+
+The issue that a single non-AP interface might not be in beacon
+slot 0 and wouldn't be send out is solved by moving it into the
+first slot. The TSF value in hardware is adjusted accordingly so
+that the timestamp of the beacons stay consistent.
+
+Signed-off-by: Benjamin Berg <benjamin.berg at open-mesh.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -637,6 +637,8 @@ struct ath9k_vif_iter_data {
+ int nwds; /* number of WDS vifs */
+ int nadhocs; /* number of adhoc vifs */
+ int nocbs; /* number of OCB vifs */
++ int nbcnvifs; /* number of beaconing vifs */
++ struct ieee80211_vif *primary_beacon_vif;
+ struct ieee80211_vif *primary_sta;
+ };
+
+@@ -685,10 +687,11 @@ struct ath_beacon {
+ };
+
+ void ath9k_beacon_tasklet(unsigned long data);
+-void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
+- u32 changed);
++void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *main_vif,
++ bool beacons);
+ void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
+ void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
++void ath9k_beacon_ensure_primary_slot(struct ath_softc *sc);
+ void ath9k_set_beacon(struct ath_softc *sc);
+ bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif);
+ void ath9k_csa_update(struct ath_softc *sc);
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -209,7 +209,6 @@ void ath9k_beacon_assign_slot(struct ath
+ }
+
+ sc->beacon.bslot[avp->av_bslot] = vif;
+- sc->nbcnvifs++;
+
+ ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n",
+ avp->av_bslot);
+@@ -220,15 +219,12 @@ void ath9k_beacon_remove_slot(struct ath
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_vif *avp = (void *)vif->drv_priv;
+ struct ath_buf *bf = avp->av_bcbuf;
+- struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
+
+ ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
+ avp->av_bslot);
+
+ tasklet_disable(&sc->bcon_tasklet);
+
+- cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
+-
+ if (bf && bf->bf_mpdu) {
+ struct sk_buff *skb = bf->bf_mpdu;
+ dma_unmap_single(sc->dev, bf->bf_buf_addr,
+@@ -240,12 +236,73 @@ void ath9k_beacon_remove_slot(struct ath
+
+ avp->av_bcbuf = NULL;
+ sc->beacon.bslot[avp->av_bslot] = NULL;
+- sc->nbcnvifs--;
+ list_add_tail(&bf->list, &sc->beacon.bbuf);
+
+ tasklet_enable(&sc->bcon_tasklet);
+ }
+
++void ath9k_beacon_ensure_primary_slot(struct ath_softc *sc)
++{
++ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
++ struct ieee80211_vif *vif;
++ struct ath_vif *avp;
++ s64 tsfadjust;
++ u32 offset;
++ int first_slot = ATH_BCBUF;
++ int slot;
++
++ tasklet_disable(&sc->bcon_tasklet);
++
++ /* Find first taken slot. */
++ for (slot = 0; slot < ATH_BCBUF; slot++) {
++ if (sc->beacon.bslot[slot]) {
++ first_slot = slot;
++ break;
++ }
++ }
++ if (first_slot == 0)
++ goto out;
++
++ /* Re-enumarate all slots, moving them forward. */
++ for (slot = 0; slot < ATH_BCBUF; slot++) {
++ if (slot + first_slot < ATH_BCBUF) {
++ vif = sc->beacon.bslot[slot + first_slot];
++ sc->beacon.bslot[slot] = vif;
++
++ if (vif) {
++ avp = (void *)vif->drv_priv;
++ avp->av_bslot = slot;
++ }
++ } else {
++ sc->beacon.bslot[slot] = NULL;
++ }
++ }
++
++ vif = sc->beacon.bslot[0];
++ if (WARN_ON(!vif))
++ goto out;
++
++ /* Get the tsf_adjust value for the new first slot. */
++ avp = (void *)vif->drv_priv;
++ tsfadjust = le64_to_cpu(avp->tsf_adjust);
++
++ ath_dbg(common, CONFIG,
++ "Adjusting global TSF after beacon slot reassignment: %lld\n",
++ (signed long long)tsfadjust);
++
++ /* Modify TSF as required and update the HW. */
++ avp->chanctx->tsf_val += tsfadjust;
++ if (sc->cur_chan == avp->chanctx) {
++ offset = ath9k_hw_get_tsf_offset(&avp->chanctx->tsf_ts, NULL);
++ ath9k_hw_settsf64(sc->sc_ah, avp->chanctx->tsf_val + offset);
++ }
++
++ /* The slots tsf_adjust will be updated by ath9k_beacon_config later. */
++
++out:
++ tasklet_enable(&sc->bcon_tasklet);
++}
++
+ static int ath9k_beacon_choose_slot(struct ath_softc *sc)
+ {
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+@@ -274,26 +331,33 @@ static int ath9k_beacon_choose_slot(stru
+ return slot;
+ }
+
+-static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
++static void ath9k_set_tsfadjust(struct ath_softc *sc,
++ struct ath_beacon_config *cur_conf)
+ {
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+- struct ath_vif *avp = (void *)vif->drv_priv;
+- struct ath_beacon_config *cur_conf = &avp->chanctx->beacon;
+ s64 tsfadjust;
++ int slot;
+
+- if (avp->av_bslot == 0)
+- return;
++ for (slot = 0; slot < ATH_BCBUF; slot++) {
++ struct ath_vif *avp;
+
+- /* tsf_adjust is added to the TSF value. We send out the beacon late,
+- * so need to adjust the TSF starting point to be later in time (i.e.
+- * the theoretical first beacon has a TSF of 0 after correction).
+- */
+- tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
+- tsfadjust = -TU_TO_USEC(tsfadjust) / ATH_BCBUF;
+- avp->tsf_adjust = cpu_to_le64(tsfadjust);
++ if (!sc->beacon.bslot[slot])
++ continue;
+
+- ath_dbg(common, CONFIG, "tsfadjust is: %lld for bslot: %d\n",
+- (signed long long)tsfadjust, avp->av_bslot);
++ avp = (void *)sc->beacon.bslot[slot]->drv_priv;
++
++ /* tsf_adjust is added to the TSF value. We send out the
++ * beacon late, so need to adjust the TSF starting point to be
++ * later in time (i.e. the theoretical first beacon has a TSF
++ * of 0 after correction).
++ */
++ tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
++ tsfadjust = -TU_TO_USEC(tsfadjust) / ATH_BCBUF;
++ avp->tsf_adjust = cpu_to_le64(tsfadjust);
++
++ ath_dbg(common, CONFIG, "tsfadjust is: %lld for bslot: %d\n",
++ (signed long long)tsfadjust, avp->av_bslot);
++ }
+ }
+
+ bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif)
+@@ -447,20 +511,28 @@ void ath9k_beacon_tasklet(unsigned long
+ * Both nexttbtt and intval have to be in usecs.
+ */
+ static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt,
+- u32 intval, bool reset_tsf)
++ u32 intval)
+ {
+ struct ath_hw *ah = sc->sc_ah;
+
+ ath9k_hw_disable_interrupts(ah);
+- if (reset_tsf)
+- ath9k_hw_reset_tsf(ah);
+ ath9k_beaconq_config(sc);
+ ath9k_hw_beaconinit(ah, nexttbtt, intval);
++ ah->imask |= ATH9K_INT_SWBA;
+ sc->beacon.bmisscnt = 0;
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
+ }
+
++static void ath9k_beacon_stop(struct ath_softc *sc)
++{
++ ath9k_hw_disable_interrupts(sc->sc_ah);
++ sc->sc_ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
++ sc->beacon.bmisscnt = 0;
++ ath9k_hw_set_interrupts(sc->sc_ah);
++ ath9k_hw_enable_interrupts(sc->sc_ah);
++}
++
+ /*
+ * For multi-bss ap support beacons are either staggered evenly over N slots or
+ * burst together. For the former arrange for the SWBA to be delivered for each
+@@ -472,7 +544,7 @@ static void ath9k_beacon_config_ap(struc
+ struct ath_hw *ah = sc->sc_ah;
+
+ ath9k_cmn_beacon_config_ap(ah, conf, ATH_BCBUF);
+- ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, false);
++ ath9k_beacon_init(sc, conf->nexttbtt, conf->intval);
+ }
+
+ static void ath9k_beacon_config_sta(struct ath_hw *ah,
+@@ -501,7 +573,7 @@ static void ath9k_beacon_config_adhoc(st
+
+ ath9k_cmn_beacon_config_adhoc(ah, conf);
+
+- ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, conf->ibss_creator);
++ ath9k_beacon_init(sc, conf->nexttbtt, conf->intval);
+
+ /*
+ * Set the global 'beacon has been configured' flag for the
+@@ -511,44 +583,6 @@ static void ath9k_beacon_config_adhoc(st
+ set_bit(ATH_OP_BEACONS, &common->op_flags);
+ }
+
+-static bool ath9k_allow_beacon_config(struct ath_softc *sc,
+- struct ieee80211_vif *vif)
+-{
+- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+- struct ath_vif *avp = (void *)vif->drv_priv;
+-
+- if (ath9k_is_chanctx_enabled()) {
+- /*
+- * If the VIF is not present in the current channel context,
+- * then we can't do the usual opmode checks. Allow the
+- * beacon config for the VIF to be updated in this case and
+- * return immediately.
+- */
+- if (sc->cur_chan != avp->chanctx)
+- return true;
+- }
+-
+- if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
+- if (vif->type != NL80211_IFTYPE_AP) {
+- ath_dbg(common, CONFIG,
+- "An AP interface is already present !\n");
+- return false;
+- }
+- }
+-
+- if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
+- if ((vif->type == NL80211_IFTYPE_STATION) &&
+- test_bit(ATH_OP_BEACONS, &common->op_flags) &&
+- vif != sc->cur_chan->primary_sta) {
+- ath_dbg(common, CONFIG,
+- "Beacon already configured for a station interface\n");
+- return false;
+- }
+- }
+-
+- return true;
+-}
+-
+ static void ath9k_cache_beacon_config(struct ath_softc *sc,
+ struct ath_chanctx *ctx,
+ struct ieee80211_bss_conf *bss_conf)
+@@ -584,87 +618,79 @@ static void ath9k_cache_beacon_config(st
+ if (cur_conf->dtim_period == 0)
+ cur_conf->dtim_period = 1;
+
++ ath9k_set_tsfadjust(sc, cur_conf);
+ }
+
+-void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
+- u32 changed)
++void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *main_vif,
++ bool beacons)
+ {
+- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+- struct ath_hw *ah = sc->sc_ah;
+- struct ath_common *common = ath9k_hw_common(ah);
+- struct ath_vif *avp = (void *)vif->drv_priv;
+- struct ath_chanctx *ctx = avp->chanctx;
++ struct ath_hw *ah = sc->sc_ah;
++ struct ath_common *common = ath9k_hw_common(ah);
++ struct ath_vif *avp;
++ struct ath_chanctx *ctx;
+ struct ath_beacon_config *cur_conf;
+ unsigned long flags;
++ bool enabled;
+ bool skip_beacon = false;
+
+- if (!ctx)
++ if (!beacons) {
++ clear_bit(ATH_OP_BEACONS, &common->op_flags);
++ ath9k_beacon_stop(sc);
+ return;
++ }
+
+- cur_conf = &avp->chanctx->beacon;
+- if (vif->type == NL80211_IFTYPE_AP)
+- ath9k_set_tsfadjust(sc, vif);
+-
+- if (!ath9k_allow_beacon_config(sc, vif))
++ if (WARN_ON(!main_vif))
+ return;
+
+- if (vif->type == NL80211_IFTYPE_STATION) {
+- ath9k_cache_beacon_config(sc, ctx, bss_conf);
+- if (ctx != sc->cur_chan)
+- return;
++ avp = (void *)main_vif->drv_priv;
++ ctx = avp->chanctx;
++ cur_conf = &ctx->beacon;
++ enabled = cur_conf->enable_beacon;
++ cur_conf->enable_beacon = beacons;
++
++ if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
++ ath9k_cache_beacon_config(sc, ctx, &main_vif->bss_conf);
+
+ ath9k_set_beacon(sc);
+ set_bit(ATH_OP_BEACONS, &common->op_flags);
+ return;
+ }
+
+- /*
+- * Take care of multiple interfaces when
+- * enabling/disabling SWBA.
+- */
+- if (changed & BSS_CHANGED_BEACON_ENABLED) {
+- bool enabled = cur_conf->enable_beacon;
+-
+- if (!bss_conf->enable_beacon) {
+- cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
+- } else {
+- cur_conf->enable_beacon |= BIT(avp->av_bslot);
+- if (!enabled)
+- ath9k_cache_beacon_config(sc, ctx, bss_conf);
+- }
+- }
+-
+- if (ctx != sc->cur_chan)
+- return;
++ /* Update the beacon configuration. */
++ ath9k_cache_beacon_config(sc, ctx, &main_vif->bss_conf);
+
+ /*
+ * Configure the HW beacon registers only when we have a valid
+ * beacon interval.
+ */
+ if (cur_conf->beacon_interval) {
+- /*
+- * If we are joining an existing IBSS network, start beaconing
+- * only after a TSF-sync has taken place. Ensure that this
+- * happens by setting the appropriate flags.
++ /* Special case to sync the TSF when joining an existing IBSS.
++ * This is only done if no AP interface is active.
++ * Note that mac80211 always resets the TSF when creating a new
++ * IBSS interface.
+ */
+- if ((changed & BSS_CHANGED_IBSS) && !bss_conf->ibss_creator &&
+- bss_conf->enable_beacon) {
++ if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC &&
++ !enabled && beacons && !main_vif->bss_conf.ibss_creator) {
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+ skip_beacon = true;
+- } else {
+- ath9k_set_beacon(sc);
+ }
+
+ /*
+ * Do not set the ATH_OP_BEACONS flag for IBSS joiner mode
+ * here, it is done in ath9k_beacon_config_adhoc().
+ */
+- if (cur_conf->enable_beacon && !skip_beacon)
++ if (beacons && !skip_beacon) {
+ set_bit(ATH_OP_BEACONS, &common->op_flags);
+- else
++ ath9k_set_beacon(sc);
++ } else {
+ clear_bit(ATH_OP_BEACONS, &common->op_flags);
++ ath9k_beacon_stop(sc);
++ }
++ } else {
++ clear_bit(ATH_OP_BEACONS, &common->op_flags);
++ ath9k_beacon_stop(sc);
+ }
+ }
+
+--- a/drivers/net/wireless/ath/ath9k/common.h
++++ b/drivers/net/wireless/ath/ath9k/common.h
+@@ -50,6 +50,7 @@
+ #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
+
+ struct ath_beacon_config {
++ struct ieee80211_vif *main_vif;
+ int beacon_interval;
+ u16 dtim_period;
+ u16 bmiss_timeout;
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -910,6 +910,22 @@ static bool ath9k_uses_beacons(int type)
+ }
+ }
+
++static void ath9k_vif_iter_set_beacon(struct ath9k_vif_iter_data *iter_data,
++ struct ieee80211_vif *vif)
++{
++ /* Use the first (configured) interface, but prefering AP interfaces. */
++ if (!iter_data->primary_beacon_vif) {
++ iter_data->primary_beacon_vif = vif;
++ } else {
++ if (iter_data->primary_beacon_vif->type != NL80211_IFTYPE_AP &&
++ vif->type == NL80211_IFTYPE_AP)
++ iter_data->primary_beacon_vif = vif;
++ }
++
++ iter_data->beacons = true;
++ iter_data->nbcnvifs += 1;
++}
++
+ static void ath9k_vif_iter(struct ath9k_vif_iter_data *iter_data,
+ u8 *mac, struct ieee80211_vif *vif)
+ {
+@@ -931,6 +947,8 @@ static void ath9k_vif_iter(struct ath9k_
+ switch (vif->type) {
+ case NL80211_IFTYPE_AP:
+ iter_data->naps++;
++ if (vif->bss_conf.enable_beacon)
++ ath9k_vif_iter_set_beacon(iter_data, vif);
+ break;
+ case NL80211_IFTYPE_STATION:
+ iter_data->nstations++;
+@@ -943,12 +961,12 @@ static void ath9k_vif_iter(struct ath9k_
+ case NL80211_IFTYPE_ADHOC:
+ iter_data->nadhocs++;
+ if (vif->bss_conf.enable_beacon)
+- iter_data->beacons = true;
++ ath9k_vif_iter_set_beacon(iter_data, vif);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ iter_data->nmeshes++;
+ if (vif->bss_conf.enable_beacon)
+- iter_data->beacons = true;
++ ath9k_vif_iter_set_beacon(iter_data, vif);
+ break;
+ case NL80211_IFTYPE_WDS:
+ iter_data->nwds++;
+@@ -1081,7 +1099,6 @@ void ath9k_calculate_summary_state(struc
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_vif_iter_data iter_data;
+- struct ath_beacon_config *cur_conf;
+
+ ath_chanctx_check_active(sc, ctx);
+
+@@ -1103,13 +1120,12 @@ void ath9k_calculate_summary_state(struc
+ ath_hw_setbssidmask(common);
+
+ if (iter_data.naps > 0) {
+- cur_conf = &ctx->beacon;
+ ath9k_hw_set_tsfadjust(ah, true);
+ ah->opmode = NL80211_IFTYPE_AP;
+- if (cur_conf->enable_beacon)
+- iter_data.beacons = true;
+ } else {
+ ath9k_hw_set_tsfadjust(ah, false);
++ if (iter_data.beacons)
++ ath9k_beacon_ensure_primary_slot(sc);
+
+ if (iter_data.nmeshes)
+ ah->opmode = NL80211_IFTYPE_MESH_POINT;
+@@ -1134,7 +1150,6 @@ void ath9k_calculate_summary_state(struc
+ ctx->switch_after_beacon = true;
+ }
+
+- ah->imask &= ~ATH9K_INT_SWBA;
+ if (ah->opmode == NL80211_IFTYPE_STATION) {
+ bool changed = (iter_data.primary_sta != ctx->primary_sta);
+
+@@ -1151,16 +1166,12 @@ void ath9k_calculate_summary_state(struc
+ if (ath9k_hw_mci_is_enabled(sc->sc_ah))
+ ath9k_mci_update_wlan_channels(sc, true);
+ }
+- } else if (iter_data.beacons) {
+- ah->imask |= ATH9K_INT_SWBA;
+ }
++ sc->nbcnvifs = iter_data.nbcnvifs;
++ ath9k_beacon_config(sc, iter_data.primary_beacon_vif,
++ iter_data.beacons);
+ ath9k_hw_set_interrupts(ah);
+
+- if (iter_data.beacons)
+- set_bit(ATH_OP_BEACONS, &common->op_flags);
+- else
+- clear_bit(ATH_OP_BEACONS, &common->op_flags);
+-
+ if (ah->slottime != iter_data.slottime) {
+ ah->slottime = iter_data.slottime;
+ ath9k_hw_init_global_settings(ah);
+@@ -1777,9 +1788,7 @@ static void ath9k_bss_info_changed(struc
+ if ((changed & BSS_CHANGED_BEACON_ENABLED) ||
+ (changed & BSS_CHANGED_BEACON_INT) ||
+ (changed & BSS_CHANGED_BEACON_INFO)) {
+- ath9k_beacon_config(sc, vif, changed);
+- if (changed & BSS_CHANGED_BEACON_ENABLED)
+- ath9k_calculate_summary_state(sc, avp->chanctx);
++ ath9k_calculate_summary_state(sc, avp->chanctx);
+ }
+
+ if ((avp->chanctx == sc->cur_chan) &&
diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
index 0204fa0..a8a8a4c 100644
--- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -813,6 +813,9 @@ static inline int ath9k_dump_btcoex(stru
+@@ -816,6 +816,9 @@ static inline int ath9k_dump_btcoex(stru
#ifdef CPTCFG_MAC80211_LEDS
void ath_init_leds(struct ath_softc *sc);
void ath_deinit_leds(struct ath_softc *sc);
@@ -10,7 +10,7 @@
#else
static inline void ath_init_leds(struct ath_softc *sc)
{
-@@ -949,6 +952,13 @@ void ath_ant_comb_scan(struct ath_softc
+@@ -952,6 +955,13 @@ void ath_ant_comb_scan(struct ath_softc
#define ATH9K_NUM_CHANCTX 2 /* supports 2 operating channels */
@@ -24,7 +24,7 @@
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
-@@ -1001,9 +1011,8 @@ struct ath_softc {
+@@ -1004,9 +1014,8 @@ struct ath_softc {
spinlock_t chan_lock;
#ifdef CPTCFG_MAC80211_LEDS
@@ -112,7 +112,8 @@
+ GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
-+
+
+- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
+ led->gpio = gpio = (struct gpio_led *) (led + 1);
+ _name = (char *) (led->gpio + 1);
+
@@ -125,8 +126,7 @@
+ ret = ath_add_led(sc, led);
+ if (unlikely(ret < 0))
+ kfree(led);
-
-- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
++
+ return ret;
}
@@ -134,11 +134,11 @@
{
- if (!sc->led_registered)
- return;
-+ struct ath_led *led;
-
+-
- ath_led_brightness(&sc->led_cdev, LED_OFF);
- led_classdev_unregister(&sc->led_cdev);
--
++ struct ath_led *led;
+
- ath9k_hw_gpio_free(sc->sc_ah, sc->sc_ah->led_pin);
+ while (!list_empty(&sc->leds)) {
+ led = list_first_entry(&sc->leds, struct ath_led, list);
diff --git a/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch b/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch
index 116860d..405ca11 100644
--- a/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch
+++ b/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch
@@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
#include "common.h"
#include "debug.h"
-@@ -959,6 +960,14 @@ struct ath_led {
+@@ -962,6 +963,14 @@ struct ath_led {
struct led_classdev cdev;
};
@@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
-@@ -1013,6 +1022,9 @@ struct ath_softc {
+@@ -1016,6 +1025,9 @@ struct ath_softc {
#ifdef CPTCFG_MAC80211_LEDS
const char *led_default_trigger;
struct list_head leds;
diff --git a/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch b/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch
index d331b15..d962eda 100644
--- a/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch
+++ b/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch
@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1024,6 +1024,7 @@ struct ath_softc {
+@@ -1027,6 +1027,7 @@ struct ath_softc {
struct list_head leds;
#ifdef CONFIG_GPIOLIB
struct ath9k_gpio_chip *gpiochip;
diff --git a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
index b53102b..be210f2 100644
--- a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
+++ b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch
@@ -91,7 +91,8 @@
+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, word);
+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1);
+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1);
-+
+
+- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+ }
+ break;
@@ -103,8 +104,7 @@
+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
-- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
++
+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+ }
+ break;
More information about the lede-commits
mailing list