[source] ar71xx: add support for TP-LINK WR1043ND v4
LEDE Commits
lede-commits at lists.infradead.org
Tue Dec 20 05:41:24 PST 2016
neoraider pushed a commit to source.git, branch master:
https://git.lede-project.org/1a4d07c2c534588cd7c8fb8bd479eb952c213dba
commit 1a4d07c2c534588cd7c8fb8bd479eb952c213dba
Author: Ludwig Thomeczek <ledesrc at wxorx.net>
AuthorDate: Fri Dec 16 12:50:34 2016 +0100
ar71xx: add support for TP-LINK WR1043ND v4
Signed-off-by: Ludwig Thomeczek <ledesrc at wxorx.net>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 6 +-
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 12 +-
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../files/arch/mips/ath79/mach-tl-wr1043nd-v4.c | 190 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/tp-link.mk | 19 ++-
target/linux/ar71xx/mikrotik/config-default | 1 +
target/linux/ar71xx/nand/config-default | 1 +
13 files changed, 243 insertions(+), 3 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index a840e2f..8db964f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -629,6 +629,15 @@ tl-wr1043nd-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
+tl-wr1043nd-v4)
+ ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+ ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+ ;;
tl-wr2543n)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 8907605..d163f60 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -299,7 +299,8 @@ ar71xx_setup_interfaces()
;;
dir-869-a1|\
epg5000|\
- esr1750)
+ esr1750|\
+ tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@@ -459,6 +460,9 @@ ar71xx_setup_macs()
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
+ tl-wr1043nd-v4)
+ wan_mac=$(mtd_get_mac_binary config 0x1017c)
+ ;;
esr900)
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index d9d8a29..ff605ae 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -346,6 +346,7 @@ get_status_led() {
tl-wr1041n-v2|\
tl-wr1043nd|\
tl-wr1043nd-v2|\
+ tl-wr1043nd-v4|\
tl-wr741nd|\
tl-wr741nd-v4|\
tl-wa801nd-v3|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 2cfd017..104b1de 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -909,6 +909,9 @@ ar71xx_board_detect() {
*"TL-WR1043ND v2")
name="tl-wr1043nd-v2"
;;
+ *"TL-WR1043ND v4")
+ name="tl-wr1043nd-v4"
+ ;;
*TL-WR2543N*)
name="tl-wr2543n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 42cc1dd..d4b1410 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -378,6 +378,7 @@ platform_check_image() {
tl-wpa8630|\
tl-wr1041n-v2|\
tl-wr1043nd-v2|\
+ tl-wr1043nd-v4|\
tl-wr1043nd|\
tl-wr2543n|\
tl-wr703n|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 58d39ad..3dad21a 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -175,6 +175,7 @@ CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y
CONFIG_ATH79_MACH_TL_WR720N_V3=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 824f47f..5bfb162 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1532,6 +1532,17 @@ config ATH79_MACH_TL_WR1043ND_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR1043ND_V4
+ bool "TP-LINK TL-WR1043ND v4 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR2543N
bool "TP-LINK TL-WR2543N/ND support"
select SOC_AR724X
@@ -1814,4 +1825,3 @@ config ATH79_MACH_TL_WPA8630
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 6d558ec..3065701 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o
obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V4) += mach-tl-wr1043nd-v4.o
obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
new file mode 100644
index 0000000..cb224f4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
@@ -0,0 +1,190 @@
+/*
+ * TP-LINK WR1043 V4 support
+ *
+ * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ * Copyright (C) 2016 Matthias Schiffer <mschiffer at universe-factory.net>
+ * Copyright (C) 2016 Andreas Ziegler <github at andreas-ziegler.de>
+ * Copyright (C) 2016 Ludwig Thomeczek <ledesrc at wxorx.net>
+ *
+ * Derived from: mach-dir-869-a1.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define TL_WR1043_V4_GPIO_BTN_RESET 2
+#define TL_WR1043_V4_GPIO_BTN_RFKILL 5
+
+#define TL_WR1043_V4_GPIO_LED_WLAN 19
+#define TL_WR1043_V4_GPIO_LED_USB 7
+#define TL_WR1043_V4_GPIO_LED_WPS 1
+#define TL_WR1043_V4_GPIO_LED_SYSTEM 6
+
+#define TL_WR1043_V4_GPIO_USB_POWER 8
+
+#define TL_WR1043_V4_GPIO_LED_WAN 15
+#define TL_WR1043_V4_GPIO_LED_LAN1 9
+#define TL_WR1043_V4_GPIO_LED_LAN2 14
+#define TL_WR1043_V4_GPIO_LED_LAN3 21
+#define TL_WR1043_V4_GPIO_LED_LAN4 20
+
+#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
+
+#define TL_WR1043_V4_MAC_LOCATION 0x1ff80174
+
+#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
+#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1043_V4_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043_V4_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR1043_V4_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V4_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V4_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
+ .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &tl_wr1043nd_v4_ar8327_data,
+ },
+};
+
+static void __init tl_wr1043nd_v4_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
+ u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
+ ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
+
+ ath79_register_usb();
+ ath79_register_mdio(0, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
+ tl_wr1043nd_v4_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
+ tl_wr1043nd_v4_gpio_keys);
+
+ gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
+ "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index ea218d7..6ead911 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -208,6 +208,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
+ ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */
ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index f6c1f5b..394f2ec 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -768,7 +768,24 @@ define Device/tl-wr1043nd-v3
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430003
endef
-TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
+
+define Device/tl-wr1043nd-v4
+ $(Device/tplink)
+ DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := TL-WR1043ND-v4
+ DEVICE_PROFILE := TLWR1043
+ TPLINK_HWID := 0x10430004
+ TPLINK_FLASHLAYOUT := 16Msafeloader
+ MTDPARTS := spi0.0:128k(u-boot)ro,1536k(kernel),14016k(rootfs),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro,15552k at 0x20000(firmware)
+ IMAGE_SIZE := 15552k
+ TPLINK_BOARD_NAME := TLWR1043NDV4
+ KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined -j
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+endef
+TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4
define Device/tl-wr2543-v1
$(Device/tplink-8mlzma)
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index d8a694a..e980c2f 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -89,6 +89,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
# CONFIG_ATH79_MACH_TL_WR2543N is not set
# CONFIG_ATH79_MACH_TL_WR703N is not set
# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 7a1d080..a687182 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -50,6 +50,7 @@
# CONFIG_ATH79_MACH_TL_WDR4300 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
# CONFIG_ATH79_MACH_TL_WR2543N is not set
# CONFIG_ATH79_MACH_TL_WR703N is not set
# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
More information about the lede-commits
mailing list