[source] ar71xx: remove AP113 reference design board support

LEDE Commits lede-commits at lists.infradead.org
Mon Dec 12 01:23:50 PST 2016 

nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/30285facbe3769ca508c865638c4ee2238270fbe

commit 30285facbe3769ca508c865638c4ee2238270fbe
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Fri Dec 9 14:26:12 2016 +0100

    ar71xx: remove AP113 reference design board support
    
    Due to flash size limitations, support for this board has not been
    functional for years
    
    Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds |  1 -
 .../linux/ar71xx/base-files/etc/board.d/02_network |  1 -
 .../etc/uci-defaults/03_network-switchX-migration  |  1 -
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |  3 -
 .../ar71xx/base-files/lib/upgrade/platform.sh      |  1 -
 target/linux/ar71xx/config-4.4                     |  1 -
 .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   | 10 ---
 target/linux/ar71xx/files/arch/mips/ath79/Makefile |  1 -
 .../ar71xx/files/arch/mips/ath79/mach-ap113.c      | 84 ----------------------
 .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |  1 -
 target/linux/ar71xx/mikrotik/config-default        |  1 -
 target/linux/ar71xx/nand/config-default            |  1 -
 12 files changed, 106 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 38e665f..dcdaab0 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -45,7 +45,6 @@ arduino-yun)
 	ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
 	ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
 	;;
-ap113|\
 db120)
 	ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
 	;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index f287d4b..440e00f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -146,7 +146,6 @@ ar71xx_setup_interfaces()
 	ubnt-unifi-outdoor)
 		ucidef_set_interface_lan "eth0 eth1"
 		;;
-	ap113|\
 	pb92|\
 	wzr-hp-g300nh2)
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
index c6b91b7..c67555f 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
@@ -48,7 +48,6 @@ case "$board" in
 dir-825-c1|\
 wzr-hp-g300nh2|\
 pb92|\
-ap113|\
 tl-wdr4300|\
 tl-wr1041n-v2|\
 wrt160nl|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ffab8eb..cf84dad 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -435,9 +435,6 @@ ar71xx_board_detect() {
 	*"Arduino Yun")
 		name="arduino-yun"
 		;;
-	*AP113)
-		name="ap113"
-		;;
 	*"AP121 reference board")
 		name="ap121"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0100d27..b028cd3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -261,7 +261,6 @@ platform_check_image() {
 		;;
 	alfa-ap96|\
 	alfa-nx|\
-	ap113|\
 	ap121-mini|\
 	ap121|\
 	ap135-020|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index e83e668..5e0275a 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -40,7 +40,6 @@ CONFIG_ATH79_MACH_ALL0315N=y
 CONFIG_ATH79_MACH_ANTMINER_S1=y
 CONFIG_ATH79_MACH_ANTMINER_S3=y
 CONFIG_ATH79_MACH_ANTROUTER_R1=y
-CONFIG_ATH79_MACH_AP113=y
 CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index a0f24e1..4d82db2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN
 	  Say 'Y' here if you want your kernel to support the
 	  Arduino Yun.
 
-config ATH79_MACH_AP113
-	bool "Atheros AP113 board support"
-	select SOC_AR724X
-	select ATH79_DEV_M25P80
-	select ATH79_DEV_PB9X_PCI if PCI
-	select ATH79_DEV_GPIO_BUTTONS
-	select ATH79_DEV_LEDS_GPIO
-	select ATH79_DEV_USB
-	select ATH79_DEV_ETH
-
 config ATH79_MACH_AP132
 	bool "Atheros AP132 reference board"
 	select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 03ca101..a39e8d2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N)		+= mach-all0315n.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)		+= mach-antminer-s1.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)		+= mach-antminer-s3.o
 obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1)		+= mach-antrouter-r1.o
-obj-$(CONFIG_ATH79_MACH_AP113)			+= mach-ap113.o
 obj-$(CONFIG_ATH79_MACH_AP121)			+= mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP132)			+= mach-ap132.o
 obj-$(CONFIG_ATH79_MACH_AP136)			+= mach-ap136.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
deleted file mode 100644
index 9b38faa..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB		0
-#define AP113_GPIO_LED_STATUS		1
-#define AP113_GPIO_LED_ST		11
-
-#define AP113_GPIO_BTN_JUMPSTART	12
-
-#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-	{
-		.name		= "ap113:green:usb",
-		.gpio		= AP113_GPIO_LED_USB,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:status",
-		.gpio		= AP113_GPIO_LED_STATUS,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:st",
-		.gpio		= AP113_GPIO_LED_ST,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-	{
-		.desc		= "jumpstart button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP113_GPIO_BTN_JUMPSTART,
-		.active_low	= 1,
-	},
-};
-
-static void __init ap113_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_mdio(0, ~BIT(0));
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ap113_gpio_keys),
-					 ap113_gpio_keys);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-					ap113_leds_gpio);
-
-	ath79_register_pci();
-
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
-	     ap113_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index cd26598..5893790 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -26,7 +26,6 @@ enum ath79_mach_type {
 	ATH79_MACH_ANTMINER_S1,			/* Antminer S1 */
 	ATH79_MACH_ANTMINER_S3,			/* Antminer S3 */
 	ATH79_MACH_ANTROUTER_R1,		/* Antrouter R1 */
-	ATH79_MACH_AP113,			/* Atheros AP113 reference board */
 	ATH79_MACH_AP121,			/* Atheros AP121 reference board */
 	ATH79_MACH_AP121_MINI,			/* Atheros AP121-MINI reference board */
 	ATH79_MACH_AP132,			/* Atheros AP132 reference board */
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 3d5d20d..aa898ee 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -4,7 +4,6 @@
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
 # CONFIG_ATH79_MACH_ANTMINER_S1 is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 1c3a650..49480f2 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -3,7 +3,6 @@
 # CONFIG_ATH79_MACH_ALFA_NX is not set
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set

More information about the lede-commits mailing list