[FS#1417] Linksys WRT 3200ACM Note for DFS of WRT3200ACM (88W8964)

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - patrikx3 (p3x-robot) 

Attached to Project - OpenWrt/LEDE Project
Summary - Linksys WRT 3200ACM Note for DFS of WRT3200ACM (88W8964)
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - All
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:

* Device problem occurs on
  * Linksys WRT 3200ACM
* Software versions of OpenWrt/LEDE release, packages, etc.
  * All releases (trunk, stable)
* Steps to reproduce
  * The firmware is included the following packages by default: 
    * kmod-mwifiex-sdio
    * mwifiex-sdio-firmware  
    * radio2 and default_radio2 in /etc/config/wireless - which is the radar for Linksys WRT 3200ACM


Based on the discussions with @yuhhaurlin from Github based on and the European but US version as well:
https://github.com/kaloz/mwlwifi/blob/master/README.md - Note for DFS of WRT3200ACM (88W8964)
https://github.com/kaloz/mwlwifi/issues/280
https://github.com/kaloz/mwlwifi/issues/280#issuecomment-370997269
https://github.com/kaloz/mwlwifi/issues/280#issuecomment-371061171
https://github.com/kaloz/mwlwifi/issues/280#issuecomment-371063231
https://github.com/kaloz/mwlwifi/issues/280#issuecomment-371070315

As @yuhhaurlin described mwlwifi takes care of everything of this router, but the defaults for the configs includes the:
* kmod-mwifiex-sdio
* mwifiex-sdio-firmware
* radio2 and default_radio2 in /etc/config/wireless - which is the radar for Linksys WRT 3200ACM

But it just giving problems and to make to work you need to exclude these.

My request is to remove it in the .config defaults and the image-builder as well so the router is working (will) perfectly with 160Mhz, DTS, DFS radar and MU-MIMO.

They could be installed as a module, but as @yuhhaurlin in GitHub describes mwlwifi is not required totally.

Besides kmod-mwifiex-sdio and mwifiex-sdio-firmware might only work with US, but then again mwlwifi takes care everything.

 

   

 

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=1417