[FS#1385] Unable to set up repeater on DFS-channel

LEDE Bugs lede-bugs at lists.infradead.org
Fri Feb 23 11:02:06 PST 2018


A new Flyspray task has been opened.  Details are below. 

User who did this - huaracheguarache (huaracheguarache) 

Attached to Project - OpenWrt/LEDE Project
Summary - Unable to set up repeater on DFS-channel
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - I have a TP-Link RE450 v1 wireless repeater running OpenWrt SNAPSHOT r6257-94a3af88f3 that I want to set up to extend a network running on a DFS-channel. I am able to connect to the main network in client mode - it is hosted on a NETGEAR R7800 running OpenWrt SNAPSHOT r6150-dc7a1e8555 (hnyman's latest build). However, the repeating network refuses to start up. This is the guide I followed to set up the relayd-based relay (Luci GUI method): https://openwrt.org/docs/user-guide/wifi/relay_configuration 

When following the same method to set up a non-DFS channel everything works as it should.

Here is the system log:

Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.000000] Linux version 4.9.82 (buildbot at builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6038-13e8d54) ) #0 Sun Feb 18 08:21:12 2018
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000] MyLoader: sysp=212b15a7, boardp=2d6f6985, parts=6de765b6
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Zone ranges:
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Early memory node ranges
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804ab9e4, node_mem_map 81000020
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.000000] Kernel command line:  board=RE450 mtdparts=spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Memory: 124612K/131072K available (3394K kernel code, 174K rwdata, 836K rodata, 260K init, 219K bss, 6460K reserved, 0K cma-reserved)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] NR_IRQS:51
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.008299] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.071187] pid_max: default: 32768 minimum: 301
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.076184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.083229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.092660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.103156] futex hash table entries: 256 (order: -1, 3072 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.110567] NET: Registered protocol family 16
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.116508] MIPS: machine is TP-LINK RE450
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.122731] registering PCI controller with io_map_base unset
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.128976] ar724x-pci ar724x-pci.1: PCIe link is down
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.134441] registering PCI controller with io_map_base unset
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.391525] PCI host bridge to bus 0000:00
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.395892] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.403234] pci_bus 0000:00: root bus resource [io  0x0000]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.409157] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.416382] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.424828] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.424865] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.424915] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.424980] pci 0000:00:00.0: supports D1 D2
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.425150] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.425171] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.432989] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.440777] PCI host bridge to bus 0000:01
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.445157] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.452466] pci_bus 0000:01: root bus resource [io  0x0001]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.458398] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.465613] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.474055] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.474068] pci 0000:00:00.0: using irq 40 for pin 1
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.481748] clocksource: Switched to clocksource MIPS
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.487998] NET: Registered protocol family 2
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.493366] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.500789] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.507593] TCP: Hash tables configured (established 1024 bind 1024)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.514433] UDP hash table entries: 256 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.520649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.527538] NET: Registered protocol family 1
Fri Feb 23 18:36:12 2018 kern.debug kernel: [    0.532235] PCI: CLS 0 bytes, default 32
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.534326] Crashlog allocated RAM at address 0x3f00000
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.540612] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.553247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.559445] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.576804] io scheduler noop registered
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.580974] io scheduler deadline registered (default)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.586810] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.595712] console [ttyS0] disabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.619586] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.628770] console [ttyS0] enabled
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.636186] bootconsole [early0] disabled
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    0.648931] m25p80 spi0.0: found s25fl064k, expected m25p80
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.667134] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.672033] 6 cmdlinepart partitions found on MTD device spi0.0
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.678029] Creating 6 MTD partitions on "spi0.0":
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.682906] 0x000000000000-0x000000020000 : "u-boot"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.689064] 0x000000020000-0x000000600000 : "firmware"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.707081] 2 tplink-fw partitions found on MTD device firmware
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.713127] 0x000000020000-0x000000185ceb : "kernel"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.719204] 0x0000001a0000-0x000000600000 : "rootfs"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.725496] mtd: device 3 (rootfs) set to be root filesystem
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.731263] 1 squashfs-split partitions found on MTD device rootfs
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.737575] 0x000000440000-0x000000600000 : "rootfs_data"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.744349] 0x000000600000-0x000000610000 : "partition-table"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.751431] 0x000000610000-0x000000620000 : "product-info"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.758325] 0x000000620000-0x0000007f0000 : "config"
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    0.764662] 0x0000007f0000-0x000000800000 : "art"
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.773062] libphy: GPIO Bitbanged MDIO: probed
Fri Feb 23 18:36:12 2018 kern.info kernel: [    0.778061] libphy: Fixed MDIO Bus: probed
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.512179] ag71xx ag71xx.0: connected to PHY at gpio-0:04 [uid=004dd072, driver=Atheros 8035 ethernet]
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.522288] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.530065] NET: Registered protocol family 10
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.537560] NET: Registered protocol family 17
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.542160] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.555384] 8021q: 802.1Q VLAN Support v1.8
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.561016] hctosys: unable to open rtc device (rtc0)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.571029] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Fri Feb 23 18:36:12 2018 kern.info kernel: [    1.579154] Freeing unused kernel memory: 260K
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    1.583687] This architecture does not have kernel memory protection.
Fri Feb 23 18:36:12 2018 user.info kernel: [    2.132376] init: Console is alive
Fri Feb 23 18:36:12 2018 user.info kernel: [    2.135998] init: - watchdog -
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    2.494811] random: fast init done
Fri Feb 23 18:36:12 2018 user.info kernel: [    2.924159] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Feb 23 18:36:12 2018 user.info kernel: [    2.965714] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Feb 23 18:36:12 2018 user.info kernel: [    2.974640] init: - preinit -
Fri Feb 23 18:36:12 2018 kern.info kernel: [    4.004457] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Feb 23 18:36:12 2018 kern.info kernel: [    7.093477] eth0: link up (1000Mbps/Full duplex)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    7.098187] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Feb 23 18:36:12 2018 kern.notice kernel: [    7.293806] jffs2: notice: (403) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Fri Feb 23 18:36:12 2018 user.info kernel: [    7.311068] mount_root: switching to jffs2 overlay
Fri Feb 23 18:36:12 2018 user.warn kernel: [    7.337522] urandom-seed: Seeding with /etc/urandom.seed
Fri Feb 23 18:36:12 2018 kern.info kernel: [    7.435532] eth0: link down
Fri Feb 23 18:36:12 2018 user.info kernel: [    7.447458] procd: - early -
Fri Feb 23 18:36:12 2018 user.info kernel: [    7.450449] procd: - watchdog -
Fri Feb 23 18:36:12 2018 user.info kernel: [    8.057837] procd: - watchdog -
Fri Feb 23 18:36:12 2018 user.info kernel: [    8.061236] procd: - ubus -
Fri Feb 23 18:36:12 2018 user.info kernel: [    8.168116] procd: - init -
Fri Feb 23 18:36:12 2018 user.info kernel: [    8.539737] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.571268] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.585643] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.593800] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.602959] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.614861] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.662930] xt_time: kernel timezone is -0000
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.831336] PPP generic driver version 2.4.2
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.837672] NET: Registered protocol family 24
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    8.861154] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Fri Feb 23 18:36:12 2018 kern.info kernel: [    8.867107] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.145193] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.156072] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [    9.344946] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.355293] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.366187] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [    9.494658] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.info kernel: [    9.508099] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Fri Feb 23 18:36:12 2018 kern.info kernel: [    9.517496] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
Fri Feb 23 18:36:12 2018 kern.info kernel: [    9.530543] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.624942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Fri Feb 23 18:36:12 2018 kern.warn kernel: [    9.635573] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Feb 23 18:36:12 2018 kern.err kernel: [    9.705908] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
Fri Feb 23 18:36:12 2018 kern.info kernel: [    9.735953] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Fri Feb 23 18:36:12 2018 kern.info kernel: [   10.826902] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963073] ath: EEPROM regdomain: 0x0
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963080] ath: EEPROM indicates default country code should be used
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963083] ath: doing EEPROM country->regdmn map search
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963093] ath: country maps to regdmn code: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963098] ath: Country alpha2 being used: US
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   10.963101] ath: Regpair used: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080469] ath: EEPROM regdomain: 0x0
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080476] ath: EEPROM indicates default country code should be used
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080478] ath: doing EEPROM country->regdmn map search
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080490] ath: country maps to regdmn code: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080495] ath: Country alpha2 being used: US
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.080497] ath: Regpair used: 0x3a
Fri Feb 23 18:36:12 2018 kern.debug kernel: [   11.096449] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Fri Feb 23 18:36:12 2018 kern.info kernel: [   11.099579] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Fri Feb 23 18:36:12 2018 user.info kernel: [   11.109568] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: tunnel
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: Network device
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: bridge
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: veth
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: macvlan
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: 8021ad
Fri Feb 23 18:36:14 2018 user.notice : Added device handler type: 8021q
Fri Feb 23 18:36:14 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Fri Feb 23 18:36:14 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Fri Feb 23 18:36:15 2018 authpriv.info dropbear[953]: Not backgrounding
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN Data
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN Link
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN 2.4 GHz
Fri Feb 23 18:36:17 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN 5 GHz
Fri Feb 23 18:36:18 2018 kern.info kernel: [   18.492806] br-lan: port 1(eth0) entered blocking state
Fri Feb 23 18:36:18 2018 kern.info kernel: [   18.498113] br-lan: port 1(eth0) entered disabled state
Fri Feb 23 18:36:18 2018 kern.info kernel: [   18.503728] device eth0 entered promiscuous mode
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'lan' is enabled
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'lan' is setting up now
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'lan' is now up
Fri Feb 23 18:36:18 2018 kern.info kernel: [   18.522482] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'loopback' is enabled
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'loopback' is now up
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Network device 'lo' link is up
Fri Feb 23 18:36:18 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Feb 23 18:36:18 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Feb 23 18:36:19 2018 daemon.info procd: - init complete -
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776056] ath: EEPROM regdomain: 0x8242
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776063] ath: EEPROM indicates we should expect a country code
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776069] ath: doing EEPROM country->regdmn map search
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776075] ath: country maps to regdmn code: 0x37
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776079] ath: Country alpha2 being used: NO
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776082] ath: Regpair used: 0x37
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776087] ath: regdomain 0x8242 dynamically updated by user
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776168] ath: EEPROM regdomain: 0x8242
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776171] ath: EEPROM indicates we should expect a country code
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776176] ath: doing EEPROM country->regdmn map search
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776181] ath: country maps to regdmn code: 0x37
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776184] ath: Country alpha2 being used: NO
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776186] ath: Regpair used: 0x37
Fri Feb 23 18:36:19 2018 kern.debug kernel: [   19.776190] ath: regdomain 0x8242 dynamically updated by user
Fri Feb 23 18:36:21 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: started, version 2.79rc1 cachesize 150
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: DNS service limited to local subnets
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain test
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain onion
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain localhost
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.441522] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain local
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain invalid
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.net
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.org
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.com
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: using 3 more local addresses
Fri Feb 23 18:36:23 2018 daemon.warn dnsmasq[1349]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:36:23 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.460824] br-lan: port 2(wlan0-1) entered blocking state
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.466441] br-lan: port 2(wlan0-1) entered disabled state
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.472324] device wlan0-1 entered promiscuous mode
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state COUNTRY_UPDATE->HT_SCAN
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: interface state HT_SCAN->DFS
Fri Feb 23 18:36:23 2018 daemon.notice hostapd: wlan0-1: DFS-CAC-START freq=5560 chan=112 sec_chan=-1, width=1, seg0=106, seg1=0, cac_time=60s
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.813439] eth0: link up (1000Mbps/Full duplex)
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.818173] br-lan: port 1(eth0) entered blocking state
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.823505] br-lan: port 1(eth0) entered forwarding state
Fri Feb 23 18:36:23 2018 daemon.notice netifd: Network device 'eth0' link is up
Fri Feb 23 18:36:23 2018 kern.info kernel: [   23.830482] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Feb 23 18:36:23 2018 daemon.notice netifd: bridge 'br-lan' link is up
Fri Feb 23 18:36:23 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Feb 23 18:36:25 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:36:25 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:36:33 2018 daemon.err uhttpd[984]: luci: accepted login on /admin for root from 192.168.5.10
Fri Feb 23 18:37:24 2018 daemon.notice hostapd: wlan0-1: DFS-CAC-COMPLETED success=1 freq=5560 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Fri Feb 23 18:37:24 2018 daemon.err hostapd: Using interface wlan0-1 with hwaddr 86:16:f9:d6:21:3a and ssid "Test"
Fri Feb 23 18:37:25 2018 daemon.notice hostapd: wlan0-1: interface state DFS->ENABLED
Fri Feb 23 18:37:25 2018 daemon.notice hostapd: wlan0-1: AP-ENABLED
Fri Feb 23 18:37:25 2018 kern.info kernel: [   85.892280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Feb 23 18:37:25 2018 daemon.notice netifd: radio0 (1079): Successfully initialized wpa_supplicant
Fri Feb 23 18:37:26 2018 daemon.notice netifd: Interface 'wwan' is enabled
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5500 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5500 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5520 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5520 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5540 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5540 cf2=0
Fri Feb 23 18:37:26 2018 daemon.notice hostapd: wlan0-1: DFS-PRE-CAC-EXPIRED freq=5560 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5560 cf2=0
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.008800] wlan0: authenticate with a0:40:a0:7c:cb:b9
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.018939] wlan0: send auth to a0:40:a0:7c:cb:b9 (try 1/3)
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.026654] wlan0: authenticated
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.031919] wlan0: associate with a0:40:a0:7c:cb:b9 (try 1/3)
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.039518] wlan0: RX AssocResp from a0:40:a0:7c:cb:b9 (capab=0x111 status=0 aid=5)
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.048975] wlan0: associated
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Network device 'wlan0' link is up
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Interface 'wwan' has link connectivity
Fri Feb 23 18:37:27 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Fri Feb 23 18:37:27 2018 kern.info kernel: [   88.058784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Feb 23 18:37:27 2018 kern.debug kernel: [   88.071867] wlan0: Limiting TX power to 23 (26 - 3) dBm as advertised by a0:40:a0:7c:cb:b9
Fri Feb 23 18:37:27 2018 daemon.notice netifd: wwan (1595): udhcpc: started, v1.27.2
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: sending discover
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: sending select for 192.168.1.144
Fri Feb 23 18:37:28 2018 daemon.notice netifd: wwan (1595): udhcpc: lease of 192.168.1.144 obtained, lease time 43200
Fri Feb 23 18:37:28 2018 daemon.err hostapd: Failed to set beacon parameters
Fri Feb 23 18:37:28 2018 daemon.notice netifd: Interface 'wwan' is now up
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: reading /tmp/resolv.conf.auto
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain test
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain onion
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain localhost
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain local
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain invalid
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.net
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.org
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using local addresses only for domain example.com
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using nameserver 192.168.1.1#53
Fri Feb 23 18:37:28 2018 daemon.info dnsmasq[1349]: using 3 more local addresses
Fri Feb 23 18:37:28 2018 user.notice firewall: Reloading firewall due to ifup of wwan (wlan0)
Fri Feb 23 18:39:43 2018 daemon.warn odhcpd[888]: DHCPV6 CONFIRM IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: not on-link
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/odhcpd - 0 addresses
Fri Feb 23 18:39:44 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:39:44 2018 daemon.warn odhcpd[888]: DHCPV6 SOLICIT IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: ok fd6a:5bd0:8330::35e/128
Fri Feb 23 18:39:45 2018 daemon.warn odhcpd[888]: DHCPV6 REQUEST IA_NA from 000466ecdf7df77d2477547e0529ea254566 on br-lan: ok fd6a:5bd0:8330::35e/128
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /etc/hosts - 4 addresses
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/odhcpd - 0 addresses
Fri Feb 23 18:39:45 2018 daemon.info dnsmasq[1349]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Feb 23 18:40:06 2018 kern.notice kernel: [  113.239791] random: crng init done


And here is the kernel log:


[    0.000000] Linux version 4.9.82 (buildbot at builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6038-13e8d54) ) #0 Sun Feb 18 08:21:12 2018
[    0.000000] MyLoader: sysp=212b15a7, boardp=2d6f6985, parts=6de765b6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 804ab9e4, node_mem_map 81000020
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=RE450 mtdparts=spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 124612K/131072K available (3394K kernel code, 174K rwdata, 836K rodata, 260K init, 219K bss, 6460K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[    0.008299] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.071187] pid_max: default: 32768 minimum: 301
[    0.076184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.083229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103156] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.110567] NET: Registered protocol family 16
[    0.116508] MIPS: machine is TP-LINK RE450
[    0.122731] registering PCI controller with io_map_base unset
[    0.128976] ar724x-pci ar724x-pci.1: PCIe link is down
[    0.134441] registering PCI controller with io_map_base unset
[    0.391525] PCI host bridge to bus 0000:00
[    0.395892] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[    0.403234] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.409157] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.416382] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.424828] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[    0.424865] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.424915] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.424980] pci 0000:00:00.0: supports D1 D2
[    0.425150] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.425171] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
[    0.432989] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
[    0.440777] PCI host bridge to bus 0000:01
[    0.445157] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[    0.452466] pci_bus 0000:01: root bus resource [io  0x0001]
[    0.458398] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[    0.465613] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.474055] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.474068] pci 0000:00:00.0: using irq 40 for pin 1
[    0.481748] clocksource: Switched to clocksource MIPS
[    0.487998] NET: Registered protocol family 2
[    0.493366] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.500789] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.507593] TCP: Hash tables configured (established 1024 bind 1024)
[    0.514433] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.520649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.527538] NET: Registered protocol family 1
[    0.532235] PCI: CLS 0 bytes, default 32
[    0.534326] Crashlog allocated RAM at address 0x3f00000
[    0.540612] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.553247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.559445] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.576804] io scheduler noop registered
[    0.580974] io scheduler deadline registered (default)
[    0.586810] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.595712] console [ttyS0] disabled
[    0.619586] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.628770] console [ttyS0] enabled
[    0.636186] bootconsole [early0] disabled
[    0.648931] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.667134] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.672033] 6 cmdlinepart partitions found on MTD device spi0.0
[    0.678029] Creating 6 MTD partitions on "spi0.0":
[    0.682906] 0x000000000000-0x000000020000 : "u-boot"
[    0.689064] 0x000000020000-0x000000600000 : "firmware"
[    0.707081] 2 tplink-fw partitions found on MTD device firmware
[    0.713127] 0x000000020000-0x000000185ceb : "kernel"
[    0.719204] 0x0000001a0000-0x000000600000 : "rootfs"
[    0.725496] mtd: device 3 (rootfs) set to be root filesystem
[    0.731263] 1 squashfs-split partitions found on MTD device rootfs
[    0.737575] 0x000000440000-0x000000600000 : "rootfs_data"
[    0.744349] 0x000000600000-0x000000610000 : "partition-table"
[    0.751431] 0x000000610000-0x000000620000 : "product-info"
[    0.758325] 0x000000620000-0x0000007f0000 : "config"
[    0.764662] 0x0000007f0000-0x000000800000 : "art"
[    0.773062] libphy: GPIO Bitbanged MDIO: probed
[    0.778061] libphy: Fixed MDIO Bus: probed
[    1.512179] ag71xx ag71xx.0: connected to PHY at gpio-0:04 [uid=004dd072, driver=Atheros 8035 ethernet]
[    1.522288] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    1.530065] NET: Registered protocol family 10
[    1.537560] NET: Registered protocol family 17
[    1.542160] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.555384] 8021q: 802.1Q VLAN Support v1.8
[    1.561016] hctosys: unable to open rtc device (rtc0)
[    1.571029] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.579154] Freeing unused kernel memory: 260K
[    1.583687] This architecture does not have kernel memory protection.
[    2.132376] init: Console is alive
[    2.135998] init: - watchdog -
[    2.494811] random: fast init done
[    2.924159] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.965714] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.974640] init: - preinit -
[    4.004457] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.093477] eth0: link up (1000Mbps/Full duplex)
[    7.098187] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.293806] jffs2: notice: (403) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.311068] mount_root: switching to jffs2 overlay
[    7.337522] urandom-seed: Seeding with /etc/urandom.seed
[    7.435532] eth0: link down
[    7.447458] procd: - early -
[    7.450449] procd: - watchdog -
[    8.057837] procd: - watchdog -
[    8.061236] procd: - ubus -
[    8.168116] procd: - init -
[    8.539737] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.571268] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.585643] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    8.593800] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    8.602959] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.614861] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    8.662930] xt_time: kernel timezone is -0000
[    8.831336] PPP generic driver version 2.4.2
[    8.837672] NET: Registered protocol family 24
[    8.861154] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[    8.867107] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[    9.145193] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[    9.156072] ath10k_pci 0000:00:00.0: Falling back to user helper
[    9.344946] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[    9.355293] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[    9.366187] ath10k_pci 0000:00:00.0: Falling back to user helper
[    9.494658] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[    9.508099] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[    9.517496] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[    9.530543] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
[    9.624942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[    9.635573] ath10k_pci 0000:00:00.0: Falling back to user helper
[    9.705908] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[    9.735953] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   10.826902] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   10.963073] ath: EEPROM regdomain: 0x0
[   10.963080] ath: EEPROM indicates default country code should be used
[   10.963083] ath: doing EEPROM country->regdmn map search
[   10.963093] ath: country maps to regdmn code: 0x3a
[   10.963098] ath: Country alpha2 being used: US
[   10.963101] ath: Regpair used: 0x3a
[   11.080469] ath: EEPROM regdomain: 0x0
[   11.080476] ath: EEPROM indicates default country code should be used
[   11.080478] ath: doing EEPROM country->regdmn map search
[   11.080490] ath: country maps to regdmn code: 0x3a
[   11.080495] ath: Country alpha2 being used: US
[   11.080497] ath: Regpair used: 0x3a
[   11.096449] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   11.099579] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[   11.109568] kmodloader: done loading kernel modules from /etc/modules.d/*
[   18.492806] br-lan: port 1(eth0) entered blocking state
[   18.498113] br-lan: port 1(eth0) entered disabled state
[   18.503728] device eth0 entered promiscuous mode
[   18.522482] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   19.776056] ath: EEPROM regdomain: 0x8242
[   19.776063] ath: EEPROM indicates we should expect a country code
[   19.776069] ath: doing EEPROM country->regdmn map search
[   19.776075] ath: country maps to regdmn code: 0x37
[   19.776079] ath: Country alpha2 being used: NO
[   19.776082] ath: Regpair used: 0x37
[   19.776087] ath: regdomain 0x8242 dynamically updated by user
[   19.776168] ath: EEPROM regdomain: 0x8242
[   19.776171] ath: EEPROM indicates we should expect a country code
[   19.776176] ath: doing EEPROM country->regdmn map search
[   19.776181] ath: country maps to regdmn code: 0x37
[   19.776184] ath: Country alpha2 being used: NO
[   19.776186] ath: Regpair used: 0x37
[   19.776190] ath: regdomain 0x8242 dynamically updated by user
[   23.441522] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[   23.460824] br-lan: port 2(wlan0-1) entered blocking state
[   23.466441] br-lan: port 2(wlan0-1) entered disabled state
[   23.472324] device wlan0-1 entered promiscuous mode
[   23.813439] eth0: link up (1000Mbps/Full duplex)
[   23.818173] br-lan: port 1(eth0) entered blocking state
[   23.823505] br-lan: port 1(eth0) entered forwarding state
[   23.830482] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   85.892280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   88.008800] wlan0: authenticate with a0:40:a0:7c:cb:b9
[   88.018939] wlan0: send auth to a0:40:a0:7c:cb:b9 (try 1/3)
[   88.026654] wlan0: authenticated
[   88.031919] wlan0: associate with a0:40:a0:7c:cb:b9 (try 1/3)
[   88.039518] wlan0: RX AssocResp from a0:40:a0:7c:cb:b9 (capab=0x111 status=0 aid=5)
[   88.048975] wlan0: associated
[   88.058784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   88.071867] wlan0: Limiting TX power to 23 (26 - 3) dBm as advertised by a0:40:a0:7c:cb:b9
[  113.239791] random: crng init done




 

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=1385



More information about the lede-bugs mailing list