[FS#1363] QMI does not use correct APN

[LEDE Bugs]

The following task has a new comment added:

FS#1363 - QMI does not use correct APN
User who did this - Koen Vandeputte (xback)

----------
Hi,

1 more question:

uqmi -s -d /dev/cdc-wdm0 --set-client-id wds,19 --start-network --apn opengate --autoconnect
"ip":"100.69.24.116"  "gateway":"100.69.24.117"


uqmi -s -d /dev/cdc-wdm0 --set-client-id wds,19 --start-network --apn opengate
"ip":"46.132.191.50"   "gateway":"46.132.191.49"


uqmi -s -d /dev/cdc-wdm0 --set-client-id wds,19 --start-network --apn opengate --set-autoconnect enabled
"ip":"194.251.18.231"   "gateway":"194.251.18.232"



I notice you get *3* different IP's and gateway's using the same APN.
Any idea why?

Could you test both APN's by just leaving "set-autoconnect" and "--autoconnect" out?


I've done some more testing here,  and just leaving "--autoconnect" out seems to wield the same results.


Thanks,

Koen
----------

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=1363#comment4333