[FS#1495] No WPA2-EAP on radio2 at WRT3200ACM

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - michaelschefczyk (michaelschefczyk) 

Attached to Project - OpenWrt/LEDE Project
Summary - No WPA2-EAP on radio2 at WRT3200ACM
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - lede-17.01
Due in Version - Undecided
Due Date - Undecided
Details - On WRT3200ACM running LuCI lede-17.01 branch (git-17.290.79498-d3f0685) / LEDE Reboot 17.01.4 r3560-79f57e422d with full wpad package, setting up WPA2-EAP on radio2 does not seem to work.

WPA2-EAP does work on radio0 and radio1. On radio2, an SSID without encryption is working fine. However, WPA2-EAP on radio2 does not seem to work regardless of network particulars selected. In all cases, it was necessary to not use management frame protection (= disabled, not even optional).

The error message in the system log is:

daemon.err hostapd: nl80211: NL80211 ATTR_STA_VLAN failed: -524 (No error information)

The log of the radius server does show that authentication was positively confirmed the same as when using radio0 or radio1. The client shows the network and that it is trying to authenticate, but authentication does never complete.

 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=1495