[FS#1055] Youku YK1: No ethernet devices

[LEDE Bugs]

The following task has a new comment added:

FS#1055 - Youku YK1: No ethernet devices
User who did this - Edmunt Pienkowsky (RoEdAl)

----------
Here are the results:

======First try======

Changing


&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = ;
	mtd-mac-address = ;
	mediatek,portmap = "llllw";
};


to


&ethernet {
	pinctrl-names = "default";
	mtd-mac-address = ;
	mediatek,portmap = "llllw";
};


=====Result=====

Ethernet ports accessible, leds accessible.

====ip a====


1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0:  mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::5636:9bff:fe0d:9f69/64 scope link 
       valid_lft forever preferred_lft forever
3: wlan0:  mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
4: br-lan:  mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fd31:483a:823f::1/60 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::5636:9bff:fe0d:9f69/64 scope link 
       valid_lft forever preferred_lft forever
5: eth0.1 at eth0:  mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
6: eth0.2 at eth0:  mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 54:36:9b:0d:9f:6a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::5636:9bff:fe0d:9f6a/64 scope link 
       valid_lft forever preferred_lft forever


====ls /sys/class/leds====


rt2800soc-phy0::assoc
rt2800soc-phy0::quality
rt2800soc-phy0::radio
youku-yk1:blue:air
youku-yk1:blue:power
youku-yk1:blue:usb
youku-yk1:blue:wan


Attached full dmesg in dmesg-1.txt.

======Second try======

Changing


&pinctrl {
	state_default: pinctrl0 {
		default {
			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
			ralink,function = "gpio";
		};
	};
};


to 


&pinctrl {
	state_default: pinctrl0 {
		default {
			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
			ralink,function = "gpio";
		};
	};
};


=====Result=====

Ethernet ports accessible, leds not defined.

====ip a====


1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0:  mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::5636:9bff:fe0d:9f69/64 scope link 
       valid_lft forever preferred_lft forever
3: wlan0:  mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
4: br-lan:  mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fdfe:7948:fb60::1/60 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::5636:9bff:fe0d:9f69/64 scope link 
       valid_lft forever preferred_lft forever
5: eth0.1 at eth0:  mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether 54:36:9b:0d:9f:69 brd ff:ff:ff:ff:ff:ff
6: eth0.2 at eth0:  mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 54:36:9b:0d:9f:6a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::5636:9bff:fe0d:9f6a/64 scope link 
       valid_lft forever preferred_lft forever


====ls /sys/class/leds====


rt2800soc-phy0::assoc
rt2800soc-phy0::quality
rt2800soc-phy0::radio


Attached full dmesg in dmesg-2.txt.

----------

One or more files have been attached.

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=1055#comment3597