[FS#1199] Bad Header Checksum DIR-600 B5E
LEDE Bugs
lede-bugs at lists.infradead.org
Thu Nov 30 08:19:02 PST 2017
A new Flyspray task has been opened. Details are below.
User who did this - Lucian CRISTIAN (lucize)
Attached to Project - LEDE Project
Summary - Bad Header Checksum DIR-600 B5E
Task Type - Bug Report
Category - Other
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - LEDE Master, first flash will boot the device, on reset will error with Bad Header Checksum
lede-ramips-rt305x-dir-610-a1-squashfs-factory.bin
## Booting image at bc050000 ...
..................................................addr:80400000
We have SEAMA, Image Size = 3198916
Verifying Checksum ...
Bad Header Checksum.
## Powering up port 0 ~ 3.
Entering HTTP server.
KSEG1ADDR(NetTxPacket) = 0xA1FE7300
NetLoop,call eth_halt !
NetLoop,call eth_init !
Waitting for RX_DMA_BUSY status Start... done
Header Payload scatter function is Disable !!
ETH_STATE_ACTIVE!!
Using Eth0 (10/100-M) device
Start HTTP server on port 80, 192.168.123.23
with Openwrt openwrt-15.05.1-ramips-rt305x-dir-610-a1-squashfs-factory.bin everything is ok
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=1199
More information about the lede-bugs
mailing list