[FS#625] no default route written using proto=wwan

[LEDE Bugs]

A new Flyspray task has been opened.  Details are below. 

User who did this - chmielewskiandreas (chmielewskiandreas) 

Attached to Project - LEDE Project
Summary - no default route written using proto=wwan
Task Type - Bug Report
Category - Packages
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - lede-17.01
Due in Version - Undecided
Due Date - Undecided
Details - LEDE_RELEASE="LEDE Reboot 17.01-SNAPSHOT r6469+17-c114383"

Configure steps as follows:

Run ubus listen in backround
ubus -t 9999 listen &

uci del network.wwan
uci set network.wwan=interface
uci set network.wwan.proto=wwan
uci set network.wwan.defaultroute='0'
uci set network.wwan.pincode=****
uci set network.wwan.apn=****
uci commit && /etc/init.d/network restart
...
{ "ubus.object.add": {"id":107055350,"path":"network.interface.wwan_4"} }
{ "network.interface": {"action":"ifup","interface":"wwan_4"} }
...

As you see default route should not be written immediately. You see default route in inactive section in ubus. So now lets set the default route for this interface

uci set network.wwan.defaultroute='1'
uci commit && /etc/init.d/network reload

You see no ubus message as well no change of default route. Now lets use QMI proto directly

uci del network.wwan
uci set network.wwan=interface
uci set network.wwan.proto=qmi
uci set network.wwan.device=/dev/cdc-wdm0
uci set network.wwan.defaultroute='0'
uci set network.wwan.pincode=****
uci set network.wwan.apn=****
uci commit && /etc/init.d/network restart
...
{ "ubus.object.add": {"id":107055350,"path":"network.interface.wwan_4"} }
{ "network.interface": {"action":"ifup","interface":"wwan_4"} }
...

So now lets set the default route for this interface and you see ubus messages comming up as well default route is set

uci set network.wwan.defaultroute='1'
uci commit && /etc/init.d/network reload
{ "network.interface": {"action":"ifdown","interface":"wwan"} }
{ "network.interface": {"action":"ifdown","interface":"wwan_4"} }
root at RED50:/lib# { "ubus.object.remove": {"id":399408035,"path":"network.interface.wwan_4"} }
{ "network.interface": {"action":"ifup","interface":"wan2"} }
{ "network.interface": {"action":"ifup","interface":"wwan"} }
{ "ubus.object.add": {"id":828745890,"path":"network.interface.wwan_4"} }
{ "network.interface": {"action":"ifup","interface":"wwan_4"} }



 

More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=625