[FS#598] 842nd doesnt flash successful with factory image using the tftp-recover over the bootloader
LEDE Bugs
lede-bugs at lists.infradead.org
Sun Mar 5 08:54:09 PST 2017
A new Flyspray task has been opened. Details are below.
User who did this - Alexander Couzens (lynxis)
Attached to Project - LEDE Project
Summary - 842nd doesnt flash successful with factory image using the tftp-recover over the bootloader
Task Type - Bug Report
Category - Base system
Status - New
Assigned To -
Operating System - All
Severity - Low
Priority - Medium
Reported Version - lede-17.01
Due in Version - Undecided
Due Date - Undecided
Details -
Device: 842nd v3.1
LEDE: 17.01
Go into recovery tftp mode by pressing first the WPS/Reset button and now connect the power.
The device enters tftp recovery to download via tftp from 192.168.0.66 file (wr842nv3_tp_recovery.bin)
The device *seems* to accept the flash (sorry, no serial to confirm).
On boot, the device doesn't show leds nor it accepts any packets on ipv6 on any port (ping ff02::1) or ping to 192.168.1.1.
I guess this happens, because the oem flasher doesn't flash all blocks of the factory image.
To recover from this state:
- flash via tftp recovery
- enter LEDE rescue/recovery
- ssh root at 192.168.1.1
- use sysupgrade image
Task:
- confirm this happens also with trunk
- use serial to get more debug
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=598
More information about the lede-bugs
mailing list